IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Warn user before converting volume to different type.
WARNING: Converting vg/lvol0 logical volume to pool's meta/data volume.
THIS WILL DESTROY CONTENT OF LOGICAL VOLUME (filesystem etc.)
Since the content of volume is lost we have to query user to confirm
such operation. If user is 100% sure, he may use '--yes' to avoid prompts.
Delay archiving of metadata until we really start to
update metadata when converting volume into a snapshot.
Archive is not necessary when we abort operation early.
Do not allow conversion of too small LV into a COW snapshot device.
Without this patch snapshot target is generating these kernel
messages before creation fails:
attempt to access beyond end of device
dm-9: rw=16, want=8, limit=2
attempt to access beyond end of device
...
device-mapper: table: 253:11: snapshot: Failed to read snapshot metadata
device-mapper: ioctl: error adding target to table
device-mapper: reload ioctl on failed: Input/output error
Usage of origin as a snapshot 'COW' volume is unsupported.
Without this test lvm2 is able to generate this ugly internal error message.
To test this:
lvcreate -L1 -n lv1 vg
lvcreate -L1 -n lv2 -s vg/lv1
lvcreate -L1 -n lv3 vg
lvconvert -s vg/lv3 vg/lv1
Internal error: LVs (5) != visible LVs (1) + snapshots (1) + internal LVs (0) in VG vg
Users now have the ability to convert their existing logical volumes
into cached logical volumes. A cache pool LV must be specified using
the '--cachepool' argument. The cachepool is the small, fast LV used
to cache the large, slow LV that is being converted.
This patch allows users to convert existing logical volumes into
cache pool LVs. Since cache pool LVs consist of data and metadata
sub-LVs, there is also the '--poolmetadata' (similar to thin_pool)
which allows for the specification of the metadata device.
Avoid use of external origin with size unaligned/incompatible with
thin pool chunk size, since the last chunk is not correctly provisioned
when it is overwritten.
Avoid starting conversion of the LV to the thin pool and thin volume
at the same time. Since this is mostly a user mistake, do not try
to just convert to one of those type, since we cannot assume if the
user wanted LV to become thin volume or thin pool.
Before the fix tool reported pretty strange internal error:
Internal error: Referenced LV lvol1_tdata not listed in VG mvg.
Fixed output:
lvconvert --thinpool lvol0 -T mvg/lvol0
Can't use same LV mvg/lvol0 for thin pool and thin volume.
At the end of lvconvert --snapshot with an active origin, the origin
gets reloaded.
Commit 57c0f72b1d ("lvconvert: use
_reload_lv on more places") accidentally replaced this with a snapshot
LV reload (which does nothing because only the origin is active).
Optimize and cleanup recently introduced new function wipe_lv.
Use compound literals to get nicely initialized wipe_params struct.
Pass in lv as explicit argument for wipe_lv.
Use cmd from lv structure.
Initialize only non-null members so it's easy to see what
is the special arg.
Drop find_merging_snapshot() function. Use find_snapshot()
called after check for lv_is_merging_origin() which
is the commonly used code path - so we avoid duplicated
tests and potential risk of derefering NULL point
in unhandled error path.
Use common wipe_lv (former set_lv) fn to do zeroing as well as signature
wiping if needed. Provide new struct wipe_lv_params to define the
functionality.
Bind "lvcreate -W/--wipesignatures y" with proper wipe_lv call.
Also, add "yes" and "force" to lvcreate_params so it's possible
to apply them for the prompt: "WARNING: %s detected on %s. Wipe it? [y/n]".
Revert 4777eb6872 which put
target_present check into init_snapshot_merge(). However
this function is also used when parsing metadata. So we would
get this present test performed even when target is not really
needed. So move this target_present test directly into lvconvert.
This is an addition to original patch for lvcreate - commit 039bdad.
The same principle applies to lvconvert where there are several steps
during which we need to wipe the existing LV that's being converted
to thin pool, making sure there's no other interference from outside (udev).
Prohibit conversion of pool device with active thin volumes.
Properly restore active states only for active thin pool volume.
Use new LV_NOSCAN when converting volume into thin pool's metadata.
Patch 562ad293fd introduced code regression
when LV was converted to a thin LV with external origin and at the same time,
conversion of LV to a thin pool has been requested.
(RHBZ: #997704)
data_lv needs to be assigned after test for external conversion find pool.
1) When converting from an x-way mirror/raid1 to a y-way mirror/raid1,
the default behaviour should be to stay the same segment type.
2) When converting from linear to mirror or raid1, the default behaviour
should honor the mirror_segtype_default.
3) When converting and the '--type' argument is specified, the '--type'
argument should be honored.
catch such conditions, but errors in the tests caused the issue to go
unnoticed. The code has been fixed to perform #2 properly, the tests
have been corrected to properly test for #2, and a few other tests
were changed to explicitly specify the '--type mirror' when necessary.
The same corner cases that exist for snapshots on mirrors exist for
any logical volume layered on top of mirror. (One example is when
a mirror image fails and a non-repair LVM command is the first to
detect it via label reading. In this case, the LVM command will hang
and prevent the necessary LVM repair command from running.) When
a better alternative exists, it makes no sense to allow a new target
to stack on mirrors as a new feature. Since, RAID is now capable of
running EX in a cluster and thin is not active-active aware, it makes
sense to pair these two rather than mirror+thinpool.
As further background, here are some additional comments that I made
when addressing a bug related to mirror+thinpool:
(https://bugzilla.redhat.com/show_bug.cgi?id=919604#c9)
I am going to disallow thin* on top of mirror logical volumes.
Users will have to use the "raid1" segment type if they want this.
This bug has come down to a choice between:
1) Disallowing thin-LVs from being used as PVs.
2) Disallowing thinpools on top of mirrors.
The problem is that the code in dev_manager.c:device_is_usable() is unable
to tell whether there is a mirror device lower in the stack from the device
being checked. Pretty much anything layered on top of a mirror will suffer
from this problem. (Snapshots are a good example of this; and option #1
above has been chosen to deal with them. This can also be seen in
dev_manager.c:device_is_usable().) When a mirror failure occurs, the
kernel blocks all I/O to it. If there is an LVM command that comes along
to do the repair (or a different operation that requires label reading), it
would normally avoid the mirror when it sees that it is blocked. However,
if there is a snapshot or a thin-LV that is on a mirror, the above code
will not detect the mirror underneath and will issue label reading I/O.
This causes the command to hang.
Choosing #1 would mean that thin-LVs could never be used as PVs - even if
they are stacked on something other than mirrors.
Choosing #2 means that thinpools can never be placed on mirrors. This is
probably better than we think, since it is preferred that people use the
"raid1" segment type in the first place. However, RAID* cannot currently
be used in a cluster volume group - even in EX-only mode. Thus, a complete
solution for option #2 must include the ability to activate RAID logical
volumes (and perform RAID operations) in a cluster volume group. I've
already begun working on this.
Creation, deletion, [de]activation, repair, conversion, scrubbing
and changing operations are all now available for RAID LVs in a
cluster - provided that they are activated exclusively.
The code has been changed to ensure that no LV or sub-LV activation
is attempted cluster-wide. This includes the often overlooked
operations of activating metadata areas for the brief time it takes
to clear them. Additionally, some 'resume_lv' operations were
replaced with 'activate_lv_excl_local' when sub-LVs were promoted
to top-level LVs for removal, clearing or extraction. This was
necessary because it forces the appropriate renaming actions the
occur via resume in the single-machine case, but won't happen in
a cluster due to the necessity of acquiring a lock first.
The *raid* tests have been updated to allow testing in a cluster.
For the most part, this meant creating devices with '-aey' if they
were to be converted to RAID. (RAID requires the converting LV to
be EX because it is a condition of activation for the RAID LV in
a cluster.)
If there is no RAID support in the kernel but the default mirror
segtype is "raid1", converting legacy mirrors can be problematic.
For example, changing the log type or converting a mirror to a linear
LV does not require the RAID modules to be present. However, because
lp->segtype is set to be RAID1 by the configuration file, the command
fails.
We should only be setting lp->segtype when converting mirrors if it is
going to change (e.g. to linear or between mirror types).
When creating a new thin pool and there's no profile requested
via "lvcreate --profile ...", inherit any VG profile if it's attached.
Currently this applies to these settings:
allocation/thin_pool_chunk_size
allocation/thin_pool_discards
allocation/thin_pool_zero
Initial basic support for repair.
It currently takes pool metadata spare volume, which
is used for recovery. New spare is created if the volume
is successfuly repaired.
After the operation the previous _tmeta volume is moved
into _tmeta%d volume and if everything is ok, this volume
could be removed.
New _tmeta needs to be pvmoved to proper place and also
converted to i.e. mirror if it should be mirrored.
Later version will try to automate some steps here.
Suggest to use _tdata and _tmeta devices for that.
This fixes regression from too relaxed change in
f1d5f6ae81
Without this patch there are some empty LVs created before
mirror code recognizes it cannot continue.
(in release fix)
The --type mirror requires -m/--mirrrors:
lvconvert --type mirror vg/lvol0
--type mirror requires -m/--mirrors
Run `lvconvert --help' for more information.
The --type raid* is allowed (the checks already existed):
lvconvert --type raid10 vg/lvol0
Converting the segment type for vg/lvol0 from linear to raid10 is not yet supported.
The --type snapshot is a synonym to -s/--snapshot:
lvconvert -s vg/lvol0 vg/lvol1
Logical volume lvol1 converted to snapshot.
lvconvert --type snapshot vg/lvol0 vg/lvol1
Logical volume lvol1 converted to snapshot.
All the other segment types are not supported, e.g.:
lvconvert --type zero vg/lvol0
Conversion using --type zero is not supported.
Run `lvconvert --help' for more information.
Condition needs to check for passed in pool_metadata_lv_name
which needs to be renamed to _tmeta, for !pool_metadata_lv_name
it's already created with correct _tmeta name.
These settins are customizable by profiles:
allocation/thin_pool_zero
allocation/thin_pool_discards
allocation/thin_pool_chunk_size
activation/thin_pool_autoextend_threshold
activation/thin_pool_autoextend_percent
If the user would upconvert a linear LV to a mirror without specifying
the segment type ("--type mirror" vs "--type raid1"), the "mirror"
segment type would be chosen without consulting the 'default_mirror_segtype'
setting in lvm.conf. This is now used as the basis for determining
which should be used if left unspecified.
Previously, we have relied on UUIDs alone, and on lvmcache to make getting a
"new copy" of VG metadata fast. If the code which triggers the activation has
the correct VG metadata at hand (the version which is currently on disk), it can
now hand it to the activation code directly.
There are places where 'lv_is_active' was being used where it was
more correct to use 'lv_is_active_locally'. For example, when checking
for the existance of a kernel instance before asking for its status.
Most of the time these would work correctly. (RAID is only allowed on
non-clustered VGs at the moment, which means that 'lv_is_active' and
'lv_is_active_locally' would give the same result.) However, it is
more correct to use the proper variant and it helps with future
scenarios where targets might be allowed exclusively (or clustered) in
a cluster VG.
Attempting to up-convert an inactive mirror when there is insufficient
space leads to the following message:
Unable to allocate extents for mirror(s).
ABORTING: Failed to remove temporary mirror layer inactive_mimagetmp_3.
Manual cleanup with vgcfgrestore and dmsetup may be required.
This is caused by a failure to execute the 'deactivate_lv' function in
the error condition. The deactivate returns an error because the LV is
already inactive. This patch checks if the LV is activate and calls
deactivate_lv only if it is. This allows the error cleanup code to work
properly in this condition.
It wasn't that big of a deal anyway, since there was no previous vg_commit
that needed to be reverted. IOW, no harm was done if the allocation failed.
The message was scary and useless.
Usage of layer was not the best plan here - for proper devices stack
we have to keep correct reference in volume_group structure and
make the new thin pool LV appear as a new volume.
Keep the flag whether given thin pool argument has been given on command
line or it's been 'estimated'
Call of update_pool_params() must not change cmdline given args and
needs to know this info.
Since there is a need to move this update function into /lib, we cannot
use arg_count().
FIXME: we need some generic mechanism here.
For example, the old call and reference:
find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)
...now becomes:
find_config_tree_str(cmd, devices_dir_CFG)
So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
Add basic support for converting LV into an external origin volume.
Syntax:
lvconvert --thinpool vg/pool --originname renamed_origin -T origin
It will convert volume 'origin' into a thin volume, which will
use 'renamed_origin' as an external read-only origin.
All read/write into origin will go via 'pool'.
renamed_origin volume is read-only volume, that could be activated
only in read-only mode, and cannot be modified.
Do not allow conversion of external origin into writeable LV,
and prohibit changing the external origin size.
If the snapshot origin is also external origin, merge is prohibited.
We have been using 'mirror_region_size' in lvm.conf as the default region
size for RAID logical volumes as well as mirror logical volumes. Since,
"raid" is more inclusive and representative than "mirror", I have changed
the name of this setting. We must still check for the old setting and warn
the user if we are overriding it with the new setting if both happen to be
present.
Update the error path after problems with suspend_lv or vg_commit.
It's not exactly well defined what should happen, and this
code seems to appear in many different instancies<F2> in the
whole source code tree - we should probably pick the best version.
If a RAID array is not in-sync, replacing devices should not be allowed
as a general rule. This is because the contents used to populate the
incoming device may be undefined because the devices being read where
not in-sync. The kernel enforces this rule unless overridden by not
allowing the creation of an array that is not in-sync and includes a
devices that needs to be rebuilt.
Since we cannot know the sync state of an LV if it is inactive, we must
also enforce the rule that an array must be active to replace devices.
That leaves us with the following conditions:
1) never allow replacement or repair of devices if the LV is in-active
2) never allow replacement if the LV is not in-sync
3) allow repair if the LV is not in-sync, but warn that contents may
not be recoverable.
In the case where a user is performing the repair on the command line via
'lvconvert --repair', the warning is printed before the user is prompted
if they would like to replace the device(s). If the repair is automated
(i.e. via dmeventd and policy is "allocate"), then the device is replaced
if possible and the warning is printed.
We can also use this for conversion between different mirror segment
types. Each new segment type converter then needs to check itself
whether the --stripes is applicable.
Support swapping of metadata device if the thin pool already
exists. This way it's easy to i.e. resize metadata or their
repair operation.
User may create some empty LV, replace existing metadata
or dump and restore them into bigger LV.
Target tells us its version, and we may allow different set of options
to be supported with different version of driver.
Idea is to provide individual feature flags and later be
able to query for them.
This patch is intended to fix bug 825323 - FS turns read-only during a double
fault of a mirror leg and mirrored log's leg at the same time. It only
affects a 2-way mirror with a mirrored log. 3+-way mirrors and mirrors
without a mirrored log are not affected.
The problem resulted from the fact that the top level mirror was not
using 'noflush' when suspending before its "down-convert". When a
mirror image fails, the bios are queue until a suspend is recieved. If
it is a 'noflush' suspend, the bios can be safely requeued in the DM
core. If 'noflush' is not used, the bios must be pushed through the
target and if a device is failed for a mirror, that means issuing an
error. When an error is received by a file system, it results in it
turning read-only (depending on the FS).
Part of the problem was is due to the nature of the stacking involved in
using a mirror as a mirror's log. When an image in each fail, the top
level mirror stalls because it is waiting for a log flush. The other
stalls waiting for corrective action. When the repair command is issued,
the entire stacked arrangement is collapsed to a linear LV. The log
flush then fails (somewhat uncleanly) and the top-level mirror is suspended
without 'noflush' because it is a linear device.
This patch allows the log to be repaired first, which in turn allows the
top-level mirror's log flush to complete cleanly. The top-level mirror
is then secondarily reduced to a linear device - at which time this mirror
is suspended properly with 'noflush'.
Use log_warn to print non-fatal warning messages.
Use of log_error would confuse checker for testing
whether proper error has been reported for some real error.
For now this convertions is not supported, thus disabled.
The only supported conversion for now is to create mirrored thin pools
from mirrored devices.
Update code for lvconvert.
Change the lvconvert user interface a bit - now we require 2 specifiers
--thinpool takes LV name for data device (and makes the name)
--poolmetadata takes LV name for metadata device.
Fix type in thin help text -z -> -Z.
Supported is also new flag --discards for thinpools.
When printing a message for the user and the lv_segment pointer is available,
use segtype->ops->name() instead of segtype->name. This gives a better
user-readable name for the segment. This is especially true for the
'striped' segment type, which prints "linear" if there is an area_count of
one.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
Support has many limitations and lots of FIXMEs inside,
however it makes initial task when user creates a separate LV for
thin pool data and thin metadata already usable, so let's enable
it for testing.
Easiest API:
lvconvert --chunksize XX --thinpool data_lv metadata_lv
More functionality extensions will follow up.
TODO: Code needs some rework since a lot of same code is getting copied.
There were no messages printed upon completiion of RAID device replacement.
This could cause confusion/concern during automated recovery, because the
user sees the failure messages but no other messages indicating correction.
s/Issue/Use/, otherwise it is easy to misread "Issue" as "Issuing" - causing
the user confusion as to whether the action was performed automatically or
whether they need to issue the command.
'_lv_update_log_type' takes a lvconvert_params argument so that it can pass
down the user's preference of 'region_size' and allocation_policy. When
'mirror_remove_missing' was introduced (commit ID
95986e42a1) it didn't make sense to pass down
user preferences - so NULL was given instead. While it may never happen in
practice, static analysis reveals that this argument could be dereferenced.
So, if the user preferences were not passed in, glean the necessary fields
from what is already set in the LV.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
(Not updating WHATSNEW for this simple clean-up.)
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume. The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group. The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
Example:
~> lvconvert --type raid1 vg/mirror_lv
Steps to convert "mirror" to "raid1"
1) Allocate a RAID metadata LV for each mirror image from the same PVs
on which they are located.
2) Clear the metadata LVs. This involves writing LVM metadata, so we don't
change any aspects of the mirror LV before this so that the user can easily
remove LVs from the failed convert attempt while retaining the original
mirror.
3) Remove the mirror log, if it exists.
4) Add metadata LVs to mirror LV
5) Rename mirror sub-lvs (s/mimage/rimage/)
6) Change flags and segtype from mirror to raid1
Example:
~> lvconvert --type raid1 -m 1 vg/lv
The following steps are performed to convert linear to RAID1:
1) Allocate a metadata device from the same PV as the linear device
to provide the metadata/data LV pair required for all RAID components.
2) Allocate the required number of metadata/data LV pairs for the
remaining additional images.
3) Clear the metadata LVs. This performs a LVM metadata update.
4) Create the top-level RAID LV and add the component devices.
We want to make any failure easy to unwind. This is why we don't create the
top-level LV and add the components until the last step. Should anything
happen before that, the user could simply remove the unnecessary images. Also,
we want to ensure that the metadata LVs are cleared before forming the array to
prevent stale information from polluting the new array.
A new macro 'seg_is_linear' was added to allow us to distinguish linear LVs
from striped LVs.
~> lvconvert --splitmirrors 1 --trackchanges vg/lv
The '--trackchanges' option allows a user the ability to use an image of
a RAID1 array for the purposes of temporary read-only access. The image
can be merged back into the array at a later time and only the blocks that
have changed in the array since the split will be resync'ed. This
operation can be thought of as a partial split. The image is never completely
extracted from the array, in that the array reserves the position the device
occupied and tracks the differences between the array and the split image via
a bitmap. The image itself is rendered read-only and the name (<LV>_rimage_*)
cannot be changed. The user can complete the split (permanently splitting the
image from the array) by re-issuing the 'lvconvert' command without the
'--trackchanges' argument and specifying the '--name' argument.
~> lvconvert --splitmirrors 1 --name my_split vg/lv
Merging the tracked image back into the array is done with the '--merge'
option (included in a follow-on patch).
~> lvconvert --merge vg/lv_rimage_<n>
The internal mechanics of this are relatively simple. The 'raid' device-
mapper target allows for the specification of an empty slot in an array
via '- -'. This is what will be used if a partial activation of an array
is ever required. (It would also be possible to use 'error' targets in
place of the '- -'.) If a RAID image is found to be both read-only and
visible, then it is considered separate from the array and '- -' is used
to hold it's position in the array. So, all that needs to be done to
temporarily split an image from the array /and/ cause the kernel target's
bitmap to track (aka "mark") changes made is to make the specified image
visible and read-only. To merge the device back into the array, the image
needs to be returned to the read/write state of the top-level LV and made
invisible.
Users already have the ability to split an image from an LV of "mirror"
segtype. This patch extends that ability to LVs of "raid1" segtype.
This patch only allows a single image to be split off, however. (The
"mirror" segtype allows an arbitrary number of images to be split off.
e.g. 4-way => 3-way/linear, 2-way/2-way, linear,3-way)
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
The conditional is not just unnecessary, it would have been wrong. The code
is suppose to be checking if the 'splitmirrors_ARG' is negative, but it
instead is checking 'mirrors_ARG'. Rather than changing the argument being
checked, I've pulled the check entirely because 'splitmirrors_ARG' is already
guarenteed to not be negative by virtue of the fact that it is a 'int_arg'.
Negative values will be caught in _process_command_line().
Since format instances will use own memory pool, it's necessary to properly
deallocate it. For now, only fid is deallocated. The PV structure itself
still uses cmd mempool mostly, but anytime we'd like to add a mempool
in the struct physical_volume, we can just rename this fn to free_pv and
add the code (like we have free_vg fn for VGs).
a mirror image (or removing a log while adding a mirror). Advise the
user to use two separate commands instead.
This issue become especially problematic when PVs are specified, as they
tend to mean different things when adding vs removing. In a command that
mixes adding and removing, it is impossible to decern exactly what the
user wants.
This change prevents bug 603912.
page.
Add ->target_name to segtype_handler to allow a more specific target
name to be returned based on the state of the segment.
Result of trying to merge a snapshot using a kernel that doesn't have
the snapshot-merge target:
Before:
# lvconvert --merge vg/snap
Can't expand LV lv: snapshot target support missing from kernel?
Failed to suspend origin lv
After:
# lvconvert --merge vg/snap
Can't process LV lv: snapshot-merge target support missing from kernel?
Failed to suspend origin lv
Unable to merge LV "snap" into it's origin.
An incorrect fix on July 13, 2010 for an annoyance has caused a regression.
The offending check-in was part of the 2.02.71 release of LVM. That
check-in caused any PVs specified on the command line to be ignored when
performing a mirror split.
This patch reverses the aforementioned check-in (solving the regressions)
and posits a new solution to the list reversal problem. The original
problem was that we would always take the lowest mimage LVs from a mirror
when performing a split, but what we really want is to take the highest
mimage LVs. This patch accomplishes that by working through the list in
reverse order - choosing the higher numbered mimages first. (This also
reduces the amount of processing necessary.)
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Takahiro Yasui <takahiro.yasui@hds.com>
all but one mirror leg.
<patch header>
To handle a double failure of a mirrored log, Jon's two patches are
commited, however, lvconvert command can't still handle an error
when mirror leg and mirrored log got failure at the same time.
[Patch]: Handle both devices of a mirrored log failing (bug 607347)
posted: https://www.redhat.com/archives/lvm-devel/2010-July/msg00009.html
commit: https://www.redhat.com/archives/lvm-devel/2010-July/msg00027.html
[Patch]: Handle both devices of a mirrored log failing (bug 607347) -
additional fix
posted: https://www.redhat.com/archives/lvm-devel/2010-July/msg00093.html
commit: https://www.redhat.com/archives/lvm-devel/2010-July/msg00101.html
In the second patch, the target type of mirrored log is replaced with
error target when remove_log is set to 1, but this procedure should be
also used in other cases such as the number of mirror leg is 1. This
patch relocates the procedure to the main path.
In addition, I added following three changes.
- Removed tmp_orphan_lvs handling procedure
It seems that _delete_lv() can handle detached_log_lv properly
without adding mirror legs in mirrored log to tmp_orphan_lvs.
Therefore, I removed the procedure.
- Removed vg_write()/vg_commit()
Metadata is saved by vg_write()/vg_commit() just after detached_log_lv
is handled. Therefore, I removed vg_write()/vg_commit().
- With Jon's second patch, we think that we don't have to call
remove_mirror_log() in _lv_update_mirrored_log() because will be
handled remove_mirror_images() in _lvconvert_mirrors_repaire().
</patch header>
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
The cluster log daemon (cmirrord) is not multi-threaded and
can handle only one request at a time. When a log is stacked
on top of a mirror (which itself contains a 'core' log), it
creates a situation that cannot be solved without threading.
When the top level mirror issues a "resume", the log daemon
attempts to read from the log device to retrieve the log
state. However, the log is a mirror which, before issuing
the read, attempts to determine the 'sync' status of the
region of the mirror which is to be read. This sync status
request cannot be completed by the daemon because it is
blocked on a read I/O to the very mirror requesting the
sync status.
With mirror_log_fault_policy of 'remove' and mirror_image_fault_policy
of 'allocate', the log type of the mirror volume is converted from
'disk' or 'mirrored' to 'core' when all mirror legs but one in a mirror
volume broke.
Keep new_log_count as a number of valid log devices by using log_count
variable for a temporary usage in the first phase of error recovery
in _lvconvert_mirrors_repair().
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
When splitting off mirror images from a mirror, we always take
LVs from the end of a list. For example, if the mirror sub-devices
are lv_mimage_[012], we should select lv_mimage_2 if splitting off
one image. However, lv_mimage_0 was being selected instead.
The problem came from calling '_move_removable_mimages_to_end'
when it was unnecessary to do so. When the user /does/ specify
specific devices to be removed, this function properly moved the
appropriate LVs to the end of the list for extraction. However,
if the user /doesn't/ give any specific PVs, the function should
do nothing. '_move_removable_mimages_to_end' was keying off of
whether 'removable_pvs' was NULL or not and this value was
improperly being populated with the set of all available PVs.
This was causing '_move_removable_mimages_to_end' to completely
reverse the list, which in turn caused us to extract the
hithertofore front-of-the-list LVs.
An unhandled condition allowed the command to terminate
cleanly without a warning. Added a check for the
'--splitmirrors' argument to allow execution to the lower
level function that has the check to see if the user is
trying to split a linear device. You should now see a
message if you try to use --splitmirrors on a linear device.
Rather than attempting to remove all the images of a mirrored
log volume via remove_mirror_images, simply remove the log
if all its devices have failed.
Taka was the first to report that there is still an outstanding
issue with handling this case. I've managed to reproduce it
only very rarely, and am still working on identifying the problem.
Failing to handle the problem rarely is better than not handling
the scenario at all, so I'm checking this in.
the failure of a device that contained both a image of
a mirror and an image of the mirrored log. The order
of the handling of those faults was important (and
wrong), this patch corrects that.
Patch-From: Takahiro Yasui <tyasui@redhat.com>
Now that we have library functions to add/delete a pv from the vg->pvs
list, call them from everywhere.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This check-in enables the 'mirrored' log type. It can be specified
by using the '--mirrorlog' option as follows:
#> lvcreate -m1 --mirrorlog mirrored -L 5G -n lv vg
I've also included a couple updates to the testsuite. These updates
include tests for the new log type, and some fixes to some of the
*lvconvert* tests.
Add a merging snapshot to the deptree, using the "error" target, rather
than avoid adding it entirely. This allows proper cleanup of the -cow
device without having to rename the -cow to use the origin's name as a
prefix.
Move the preloading of the origin LV, after a merge, from
lv_remove_single() to vg_remove_snapshot(). Having vg_remove_snapshot()
preload the origin allows the -cow device to be released so that it can
be removed via deactivate_lv(). lv_remove_single()'s deactivate_lv()
reliably removes the -cow device because the associated snapshot LV,
that is to be removed when a snapshot-merge completes, is always added
to the deptree (and kernel -- via "error" target).
Now when the snapshot LV is removed both the -cow and -real devices
get removed using uuid rather than device name. This paves the way
for us to switch over to info-by-uuid queries.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This change was deferred to help ease the review of previous refactoring
related to using process_each_lv() for lvconvert's merge support. Not
that doing so _really_ helped but...
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Switch lvconvert's --merge code over to using process_each_lv(). Doing
so adds support for a single 'lvconvert --merge' to start merging
multiple LVs (which includes @tag expansion).
Add 'lvconvert --merge @tag' testing to test/t-snapshot-merge.sh
Adjust man/lvconvert.8.in to reflect these expanded capabilities.
The lvconvert.c implementation requires rereading the VG each iteration
of process_each_lv(). Otherwise a stale VG instance associated with
the LV passed to lvconvert_single_merge() would result in stale VG
metadata being written back out to disk. This overwrote new metadata
that was written when a previous snapshot LV finished merging (via
lvconvert_poll). This is only an issue when merging multiple LVs that
share the same VG (a single VG is typical for most LVM configurations on
system disks).
In the end this new support is very useful for performing a "system
rollback" that requires multiple snapshot LVs be merged to their
respective origin LV.
The yum-utils 'fs-snapshot' plugin tags all snapshot LVs that it creates
with a common 'snapshot_tag' that is unique to the yum transaction.
Rolling back a yum transaction, that created LVM snapshots with the tag
'yum_20100129133223', is as simple as:
lvconvert --merge @yum_20100129133223
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
refactoring.
Document the need to cleanup the "name" args passed around polldaemon,
lvconvert and pvmove. It is quite a mess.
Annotate the unused nature of the existing poll_fns->get_copy_vg
methods' 'uuid' arg.
depending on if the mirror has a 'core' or 'disk' log. When there
is a disk log, the new leg is added by stacking a new mirror on
top of the old (one leg is the old mirror and the other leg is the newly
added device). When the log is a 'core' log, the new leg is simply added
to the existing mirror and all the devices are re-synced.
The logic that handles collapsing the stacked 'disk' log mirror was
having the effect of causing 'core' logged mirrors to begin resync'ing
for a second time. I have used the 'CONVERTING' flag to indicate that
a mirror is converting by way of stacking. This is no longer set for
up-converting core logs. The final 'collapse' logic can safely be skipped
for 'core' log mirrors - getting rid of the second resync.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
'const'. Be consistent with its use (and dev_manager_snapshot_percent()).
Pass 'lv' from dev_manager_snapshot_percent() to _percent() to
_percent_run(). _percent_run() always dereferenced 'lv' (when
initializing segh) even though it may have been NULL (as was the case
until now for dev_manager_snapshot_percent()).
If a "snapshot-origin" LV (snapshot-merge whose merge was deferred
becuase it was open) was passed to _percent_run() it would always return
100%.
Update _percent_run() to NOT return PERCENT_100 et. al. if
->target_percent() wasn't ever called and supplied 'lv' is a merging
origin. A default return of 100% does not work for snapshot-merge.
Also tweak a related lvconvert log_error() to include "Aborting merge."
If either the origin or snapshot that is to be merged is open the merge
will not start; only the merge metadata will be written. The merge will
start on the next activation of the origin (or via lvchange --refresh)
IFF both the origin and snapshot are closed.
Merge on activate is particularly important if we want to merge over a
mounted filesystem that cannot be unmounted (until next boot) --- for
example root.
1. Found bug in 'redundant log' implementation that caused
problems when converting a linear that spanned multiple
devices to a mirror (wasn't checking for NULL value of
provided parameter in _alloc_parallel_area)
2. Testsuite was failing to perform tests when 'not' modifier
was used. This allowed a couple issues to slip through.
Added a 'not_sh' modifier that negates tests performed by
functions defined in the shell source file.
3. Was initializing a variable to far down, which cause
previously set value to be overridden. (This was the
result of the collision of the "redundant log" and
lvconvert fix patches.)
date: 2010/01/07 20:42:55; author: jbrassow; state: Exp; lines: +11 -0
The patch fixes some lvconvert issues (WRT mirror <-> mirror).
1) 'exisiting_mirrors' and 'lp->mirrors' where taken to be in 'n-1'
notation (i.e a 2-way mirror is '1' and a linear is '0'), but the
variables were in 'n' notation.
2) After adding the redundant mirror log support, I was calculating
log_count by looking at the mirror log LV, but didn't take into
account the fact that there could be no mirror log!
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
It is pretty much the same as reducing the number of
mirror legs, but we just don't delete them afterwards.
The following command line interface is enforced:
prompt> lvconvert --splitmirror <n> -n <name> <VG>/<LV>
where 'n' is the number of images to split off, and
where 'name' is the name of the newly split off logical volume.
If more than one leg is split off, a new mirror will be the
result. The newly split off mirror will have a 'core' log.
Example:
[root@bp-01 LVM2]# !lvs
lvs -a -o name,copy_percent,devices
LV Copy% Devices
lv 100.00 lv_mimage_0(0),lv_mimage_1(0),lv_mimage_2(0),lv_mimage_3(0)
[lv_mimage_0] /dev/sdb1(0)
[lv_mimage_1] /dev/sdc1(0)
[lv_mimage_2] /dev/sdd1(0)
[lv_mimage_3] /dev/sde1(0)
[lv_mlog] /dev/sdi1(0)
[root@bp-01 LVM2]# lvconvert --splitmirrors 2 --name split vg/lv /dev/sd[ce]1
Logical volume lv converted.
[root@bp-01 LVM2]# !lvs
lvs -a -o name,copy_percent,devices
LV Copy% Devices
lv 100.00 lv_mimage_0(0),lv_mimage_2(0)
[lv_mimage_0] /dev/sdb1(0)
[lv_mimage_2] /dev/sdd1(0)
[lv_mlog] /dev/sdi1(0)
split 100.00 split_mimage_0(0),split_mimage_1(0)
[split_mimage_0] /dev/sde1(0)
[split_mimage_1] /dev/sdc1(0)
It can be seen that '--splitmirror <n>' is exactly the same
as '--mirrors -<n>' (note the minus sign), except there is the
additional notion to keep the image being detached from the
mirror instead of just throwing it away.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Made .update_metadata optional in 'struct poll_functions' definitions;
eliminated _update_lvconvert_mirror() stub.
Tweak a mirror-specific error message in the generic polldaemon code.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The default log option for a mirror is 'disk'. If the log
type is not explicitly stated on the command line when
converting from an X-way mirror to a Y-way mirror, 'disk'
is chosen. So, if you have a 'core' log mirror and you
convert, your result will contain a 'disk' log.
This patch remembers what the old log type was. If the
user is merely trying to switch the number of mirror
images, the log type is now kept the same.
There is one historical behaviour I left in place...
If you have a 2-way, core-log mirror and you use lvconvert to
specify you want a 2-way mirror - without specifying the
log type - you will get a 2-way, disk-log mirror.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Informal-IRC-ACK-by: agk
The logic was that lvconvert repair volumes, marking
PV as MISSING and following vgreduce --removemissing
removes these missing devices.
Previously dmeventd mirror DSO removed all LV and PV
from VG by simply relying on
vgreduce --removemissing --force.
Now, there are two subsequent calls:
lvconvert --repair --use-policies
vgreduce --removemissing
So the VG is locked twice, opening space for all races
between other running lvm processes. If the PV reappears
with old metadata on it (so the winner performs autorepair,
if locking VG for update) the situation is even worse.
Patch simply adds removemissing PV functionality into
lvconcert BUT ONLY if running with --repair and --use-policies
and removing only these empty missing PVs which are
involved in repair.
(This combination is expected to run only from dmeventd.)
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Rebased 6/26/09 by Dave W.
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
When mirror convert polling is started (mainly as backgound process,
in lvchange -a y or in lvconvert itself) it tries to read VG
and LV identified by its name.
Unfortunatelly, the VG can have already different LV under the same name,
and various more or less funny things can happen (note that
_finish_lvconvert_mirror suspends the volume for example).
(the typical example is our testing script which continuously recreates
LVs under the same name in the same VG.)
This patch adds optional uuid parameter which helps to properly
select the monitoring object. For lvconvert polling it is set to LV UUID
and both _get_lvconvert_vg and _get_lvconvert_lv uses it to read proper VG/LV.
(In the pvmove case it is NULL, here we poll for physical volume name).
The snapshot segment (snapshotX) is created twice
during the text metadata segment processing.
This can cause temporary violation of max_lv count.
Simplify the code, snapshot segment is properly initialized
in init_snapshot_seg function now and do not need to be replaced
by vg_add_snapshot call.
The vg_add_snapshot() is now usefull only for adding new
snapshot and it shares the same initialization function.
The snapshot name is always generated, name paramater can be
removed from function call.
The backup() call store metadata from memory.
But in cluster backup() call performs
remote nodes metadata backup and it reads data from disk.
For metadata backup consistency,
patch moves all backup() calls after vg_commit.
(Moreover, some tools already do that this way.)
Fix missing VG unlocks in some pvchange error paths.
Add some missing validation of VG names.
Rename validate_vg_name() to validate_new_vg_name().
Change orphan lock to VG_ORPHANS.
Change format1 to use ORPHAN as orphan VG name.
(MIRROR_NOTSYNCED) is added to the LVM metadata. This flag is
not cleared when converting to linear. Subsequently, if you
up-convert the linear to a mirror, the flag remains - even though
an up-convert will always force a complete resync.
log type. Previously, we had a '--corelog' argument that
would change the default type from 'disk' to 'core'. I
think that creates too much confusion - especially when
doing conversions on mirrors.
The new argument '--log' takes either "disk" or "core"
as a parameter. This could be expanded in the future
for additional logging types as well.
Examples:
# Creating a 2-way mirror
$> lvcreate -m1 ... # implicitly use default disk logging
$> lvcreate -m1 --log disk ... # explicit disk logging
$> lvcreate -m1 --log core ... # specify core logging
$> lvcreate -m1 --corelog ... # old way still works
# Conversion examples
$> lvconvert --log core ... # convert to core logging
$> lvconvert --log disk ... # convert to disk logging
$> lvconvert -mX --corelog ... # old way still works
$> lvconvert -mX ... # old way of converting to disk logging still works
Changes are reflected in the man pages.
Use loop to iterate through the now-ordered policy list in _allocate().
Check for failure to allocate just the mirror log.
Introduce calc_area_multiple().
Support mirror log allocation when there is only one PV: area_count now 0.
(See lvm-devel list archives for further details.)
Add --config for overriding most config file settings from cmdline.
Quote arguments when printing command line.
Remove linefeed from 'initialising logging' message.
Add 'Completed' debug message.
Don't attempt library exit after reloading config files.
Always compile with libdevmapper, even if device-mapper is disabled.
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
