IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
PVs could be missing from the 'pvs' output if
their VG was removed at the same time that the
'pvs' command was run. To fix this:
1. If a VG is not found when processed, don't
silently skip the PVs in it, as is done when
the "skip" variable is set.
2. Repeat the VG search if some PVs are not
found on the first search through all VGs.
The second search uses a specific list of
PVs that were missed the first time.
testing:
/dev/sdb is a PV
/dev/sdd is a PV
/dev/sdg is not a PV
each test begins with:
vgcreate test /dev/sdb /dev/sdd
variations to test:
vgremove -f test & pvs
vgremove -f test & pvs -a
vgremove -f test & pvs /dev/sdb /dev/sdd
vgremove -f test & pvs /dev/sdg
vgremove -f test & pvs /dev/sdb /dev/sdg
The pvs command should always display /dev/sdb
and /dev/sdd, either as a part of VG test or not.
The pvs command should always print an error
indicating that /dev/sdg could not be found.
Commit 1a74171ca5 added
a check to ignore a VG that was FAILED_INCONSISTENT
if the command doesn't care if the VG is not found.
Remove that check because that case is never reached
by the current code.
The ONE_VGNAME_ARG was being passed and tested as
vg_read() flag but it's a cmd struct flag.
(It affects command arg processing in toollib,
not vg_read behavior. Flags related to command
processing are generally cmd struct flags, while
vg_read arg flags are generally related to vg_read
behavior.)
Running "vgremove -f VG & pvs" results in the pvs
command reporting that the VG is not found or is
inconsistent. If the VG is gone or being removed,
the pvs command should just skip it and not print
errors about it.
"Not found" is because the pvs command created the
list of VGs to process, including VG, then vgremove
removed the VG, then the pvs command came to to read
the VG to process it and did not find it.
An "inconsistent" error could be reported if vgremove
had only partially completed removing VG when pvs did
vg_read on the VG to process it, causing pvs to find
the VG in a partially-removed state.
This fix adds a flag that pvs uses to ignore a VG
that can't be read or is inconsistent.
Make lvm2_disable_dmeventd_monitoring() more explicit.
As memlock_inc_daemon() is also used by clvmd, which
does changes dmeventd and suspend ignore state at
some stages - make updates of these 2 variable
tied to the call of lvm2_disable_dmeventd_monitoring().
Once this call is made dmeventd monitoring
and suspended devices are ignored.
TODO: all lvm-global settings should really be moved
to command context.
CONVERTING status flag is a tricky one. It's not set when converting
a non-mirror LV type to the mirror type, i.e.: linear -> two leg mirror.
Also the conversion itself is instant and doesn't require to be polled.
When mirror reaches sync state there's no final update on VG metadata
for lvmpolld to be made thereby report_progress in fact doesn't report
percentage of mirror being converted but percentage of mirror
being in sync. Perhaps we should reword the lvconvert output here.
On the other hand CONVERTING is set while we upconvert the mirror
from i.e. two leg mirror to four leg mirror. In such case the operation
is required to be polled so that lvmpolld can cleanup temporary
conversion log when the conversion is over.
Ignore CONVERTING lv_type for the moment and match LVs only by uuids
during 'mirror conversion'/'waiting for a sync to finish'.
The old code made two loops through the PVs: in the first
loop it found the max PV and VG name lengths, and in the
second loop it printed each PV using the name lengths as
field widths for aligning columns.
The new code uses process_each_pv() which makes one loop
through the PVs. In the *first* call to pvscan_single(),
the max name lengths are found by looping through the
lvmcache entries which have been populated by the generic
process_each code prior to calling any _single functions.
Subsequent calls to pvscan_single() reuse the max lengths
that were found by the first call.
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.
In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.
For example:
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""
$ lvs vg
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize
lvol0 vg -wi-a----- 4.00m
If 'vgcreate --shared' finds both sanlock and dlm are running,
print a more accurate error message:
"Found multiple lock managers, select one with --lock-type."
When neither is running, we still print:
"Failed to detect a running lock manager to select lock type."
Using --lock-type sanlock|dlm implies --shared.
Using --shared selects lock type sanlock|dlm
(by choosing the one that's running.)
Using both --shared and --lock-type sanlock|dlm should
also be allowed (--shared is just redundant information.)
When user specifies '--force' with remove/remove_all/wipe_table
use '--noflush --nolockfs' resume flags, so the operation
will not block when device underneath is blocked.
Since we may want to swap names when LVs are complex types, we cannot
avoid doing full renames on both LV stacks.
Temporarily use 'pvmove_tmeta' as unused name to prevent validation troubles.
ATM allocation can't handle stripping and cache pool allocation.
It's not yet even clear what should be actually result.
Until resolved, disable this option (it's been coredumping
inside allocation anyway).
Certain stacks of cached LVs may have unexpected consequences.
So add a warning function called when LV is cached to detect
such caces and WARN user about them - the best we could do ATM.
Add a new arg to lockd_start_vg() that indicates
it is being called for a new lockd VG, so that
lvmlockd knows the lockspace being started is new.
(Will be used by a following commit.)
Commit f6473baffc introduced a new
cmd->initialized variable to keep info about which parts of the
cmd_context have been initialized.
A part of this patch was also a change in refresh_filters fn
which checks for cmd->initialized.filters variable and it does
the filter refresh *only* if the filter has already been initialized
before otherwise it's a NOOP (before, the refresh_filters also
initialized filters as a side effect in case it had not been
initialized before which was not quite correct).
However, the commit f6473baffc
did not handle the case in which configuration changes
either via --config argument or when configuration file changed
and its timestamp was higher than the timestamp of the persistent
cache file - the /etc/lvm/cache/.cache.
This patch fixes this issue and it causes the init_filters fn
in lvm_run_command fn to be called with proper value of
"load_persistent_cache" switch even if the configuration changes,
hence causing the persistent cache file to be ignored in this
case.
Replace the histogram stats subcommand with a --histogram switch
to enable histogram related fields for both list and report output.
To avoid overloading the existing --histogram rename it to --bounds:
this is also a better description of the option.
Improve the names and labels of stats reports columns, ensure that
the minimum field widths allow unambiguos labels to be shown and
update the man page descriptions of these fields.
Add support to dmstats to create and report histograms.
Add a --histogram switch to 'create' that accepts a string
description of bin boundaries and DR_STATS and DR_STATS_META fields
to report bin configuration and absolute and relative histogram
values:
hist_bins
hist_bounds
hist_ranges
hist_count
hist_count_bounds
hist_count_ranges
hist_percent
hist_percent_bounds
hist_percent_ranges
A new 'histogram' subcommand displays a report that emphasizes
histogram data as either counters or percentage values.
Add support for creating, parsing, and reporting dm-stats latency
histograms on kernels that support precise_timestamps.
Histograms are specified as a series of time values that give the
boundaries of the bins into which I/O counts accumulate (with
implicit lower and upper bounds on the first and last bins).
A new type, struct dm_histogram, is introduced to represent
histogram values and bin boundaries.
The boundary values may be given as either a string of values (with
optional unit suffixes) or as a zero terminated array of uint64_t
values expressing boundary times in nanoseconds.
A new bounds argument is added to dm_stats_create_region() which
accepts a pointer to a struct dm_histogram initialised with bounds
values.
Histogram data associated with a region is parsed during a call to
dm_stats_populate() and used to build a table of histogram values
that are pointed to from the containing area's counter set. The
histogram for a specified area may then be obtained and interogated
for values and properties.
This relies on kernel support to provide the boundary values in
a @stats_list response: this will be present in 4.3 and 4.2-stable. A
check for a minimum driver version of 4.33.0 is implemented to ensure
that this is present (4.32.0 has the necessary precise_timestamps and
histogram features but is unable to report these via @stats_list).
Access methods are provided to retrieve histogram values and bounds
as well as simple string representations of the counts and bin
boundaries. Methods are also available to return the total count
for a histogram and the relative value (as a dm_percent_t) of a
specified bin.
Remove the existing lock type using the same functions
used to remove the lockd components during vgremove.
This results in a "clean" VG and lvmlockd state after
the vgchange, i.e. no bits left over from previous
lock type.
Originally when vgdisplay encountered an exported VG it issued a
WARNING. Commit d6b1de30 replaced this with an error message
but still exited with success (incorrect). A backtrace was recently
added in commit b193809987.
As vgdisplay already states that the VG is exported in its output,
just drop these messages completely.
All cache args could be specified when caching LV
(means converting LV to cached).
When --cachemode arg is given during cache-pool conversion,
store it in the metadata.
https://bugzilla.redhat.com/show_bug.cgi?id=1255184
Add support for the kernel precise_timestamps feature. This allows
regions to be created using counters with nanosecond precision.
A new dm_stats method, dm_stats_set_precise_timestamps() causes all
future regions created with this handle to attempt to enable precise
counters.
The unlock call will fail in expected and normal cases,
and should not cause the command to fail. (An actual
unlock in the lock manager should never fail.)