IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).
A merging snapshot cannot be removed directly but the associated origin
can be. Disallow removal of a merging snapshot unless the associated
origin is also being removed.
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.
When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.
This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).
This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.
The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
lvm2app needs a link back to the vg in order to use the vg handle for
memory allocations as well as other things. This patch adds the field
to struct physical_volume, and sets pv->vg when reading a vg from disk or
extending a vg by using the helper function previously added,
add_pvl_to_vgs(). Moves and renames are handled with separate code
inside move_pv() and vgmerge(). Add pv->vg check to vg_validate().
A NULL value in pv->vg signifies membership in the orphan VG.
Note though in the case of pv_read() on a device with metadatacopies == 0,
more devices may need to be read for an authoritative answer.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a delete function to manage the vg->pvs list.
NOTE: It may be possible to do further cleanup to these add/del functions
by passing a 'pv' as input instead of 'pv_list'. The pv_list is used for
functions which do allocations (lvcreate) while other places in the code
just manage a list of 'pv' (e.g. import functions, vgextend, etc).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When moving parts of striped LVs, pvmove wouldn't care about leaving you with
two stripes on the same disk. Now --alloc anywhere is needed for that.
(Tried and gave up on two alternative approaches before the one committed here.)
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate. Update
lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
the {vg,lv}change man pages.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Similar refactoring to vgchange - pull out common parts and put into
library function for reuse. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Pull out common code to be called from tools as well as lvm2app.
Leave archive() at tool level so we can use from vgcreate
as well as vgchange. Should be no functional change.
- add stack macro in vgchange
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Internally we store sizes in sectors, but lvm2app exports sizes
in bytes. We could get fancier and allow units configuration but
this fix should do for now.
Fixes rhbz561422.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
where we should not expose internal VG names/uuids (the ones with "#" prefix )through the
interface. Otherwise, we could end up with library users opening internal VGs which will
initiate locking mechanism that won't be cleaned up properly.
"#orphans_{lvm1, lvm2, pool}" names are treated in a special way, they are truncated first
to "orphans" and this is used as a part of the lock name then (e.g. while calling lvm_vg_open()).
When library user calls lvm_vg_close(), the original name "orphans_{lvm1, lvm2, pool}"
is used directly and therefore no unlock occurs.
We should exclude internal VG names and uuids in the lists provided by lvmcache:
lvmcache_get_vgids() and lvmcache_get_vgnames().
Eliminate 'merging_snapshot' from 'struct logical_volume' and just use
'snapshot' for origin lv's reference to the merging snapshot; also set
MERGING in the origin lv's status.
Make 'merging_snapshot' pointer that points from the origin to the
segment that represents the merging snapshot.
Import/export 'merging_store' metadata.
Do not allow creating snapshots while another snapshot is merging.
Snapshot created in this state would certainly contain invalid data.
NOTE: patches at the end of this series will remove 'merging_snapshot'
and will introduce helpful wrappers and cleanups.
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.
The alignment of these structures was also audited to remove holes. The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes. The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes. Each
structures' size has not changed.
Rename fill_default_pvcreate_params to pvcreate_params_set_defaults.
Rename pvcreate_validate_restore_params to pvcreate_restore_params_validate.
Rename pvcreate_validate_params to pvcreate_params_validate.
Similar to other vg_set_* functions, we create a vg_set_clustered() function
which does a few checks and sets a flag. This is where we check for
any limitations of clusters.
We need defaults for pvcreate_params at a higher level - this will
allow us to use a common function from the tools to take defaults,
then fill in any non-defaults from the commandline.
Future patches will refactor vgcreate/vgextend to call this function
if one or more pvcreate parameters are given on the commandline.
Another refactoring for implicit pvcreate support. We need to get
the pvcreate parameters somehow to the vg_extend routine. Options
seemed to be:
1. Attach the parameters to struct volume_group. I personally
did not like this idea in most cases, though one could make an
agrument why it might be ok at least for some of the parameters
(e.g. metadatacopies).
2. Pass them in to the extend routine. This second route seemed
to be the best approach given the constraints.
Future patches will parse the command line and fill in the actual
values for the pvcreate_single call.
Should be no functional change.
Clean up VG_RESIZEABLE flag by creating vg_is_resizeable().
Update comment - we no longer have ALLOW_RESIZEABLE.
Also use vg_is_exported() in one place missed by earlier patch.
Should be no functional change.
Of the vgs field vg_attr, a few of the most likely to be used attributes
are clustered, exported, and partial. This patch adds the following 3
functions:
uint64_t lvm_vg_is_clustered(const vg_t vg)
uint64_t lvm_vg_is_exported(const vg_t vg)
uint64_t lvm_vg_is_partial(const vg_t vg)
Split vg_remove_single into vg_remove_check (mandatory checks before
vgremove) and vg_remove (do actual remove by committing to disk).
In liblvm, we'd like to provide an consistent API that allows multiple
changes in memory, then let lvm_vg_write() control the commit to disk. In
some cases (for example, lvresize calls fsadm) this may not be possible.
However, since we are using an object model and dividing things into small
operations, the most logical model seems to be the lvm_vg_write model, and
handling the special cases as they arrive. So as best as possible
we move towards this end.
A possible optimization would be to consolidate vg_remove (committing)
code with vgreduce code. A second possible optimization is making vgreduce
of the last device equivalent to vgremove. Today, lvm_vg_reduce fails if
vgreduce is called with the last device, but from an object model perspective
we could view this as equivalent to vgremove and allow it. My gut feel is
we do not want to do this though.
Author: Dave Wysochanski <dwysocha@redhat.com>
Later patches should consolidate the vgremove / vgreduce functions but for
now let's clarify what vg_remove actually does by changing the name.
Author: Dave Wysochanski <dwysocha@redhat.com>
Adds pe_align_offset to 'struct physical_volume'; is initialized with
set_pe_align_offset(). After pe_start is established pe_align_offset is
added to it.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For now, a simple way to enforce the read/write semantics is to just save the
open mode of the VG. If the caller uses lvm_vg_create, the mode is write.
The caller using lvm_vg_open can use either read or write to open the VG.
Once we have this, we enforce the permissions on each API call and don't allow
a caller to modify a VG that has not been opened properly.
This may be better combined with the locking mode, but I view that as future
cleanup, past this initial release. The intial release should enforce the
basic object semantics though, as described in the lvm.h file.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Adding the ability to get the seqno is important for an application to
determine if something has changed in a VG. Otherwise, the only way to
know is to open the VG with write permission and hold the handle.
This function behaves a little bit different than vg_reduce_single, because
it allowes to remove even the latest pv. This has been done to be consistent
to lvm_vg_create, which creates an empty vg.
removed_pvs has been added to the volume_group struct. vg_reduce adds remove
pvs to this list to be able to commit the changes for the pvs in lvm_vg_comm
in liblvm2app.
Initialize removed_pvs list in format-specific volume_group constructors.
Ideally, we should have a base constructor here that initializes the general
non-format specific members of struct volume_group. But until then, there
are multiple places to initialize these members. Maybe a better patch would
be a base constructor patch for struct volume_group. That is more work
though.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
For liblvm 'get' functions, we should share code with the reporting functions.
This means we need common code to return the values for the fields.
In this patch we refactor a few of the fields needed in liblvm.
Unfortunately, for the simple fields that do derefernces of structure
members (for example, vg_extent_count), we cannot call the common function
from the reporting infrastructure without more refactoring. The reason is
that the dereference of the simple fields is done deep inside the reporting
code (to get the generic "data" pointer), and the display function is a
generic 'size32' function. We can fix these issues later with more
refactoring.
Should be no functional change and the testsuite should cover any possible
regressions. The only fields in the report affected by this patch are:
vg_size, vg_free, and pv_mda_count.
Author: Dave Wysochanski <dwysocha@redhat.com>
After some refactorings, we can now move the bulk of _lvcreate into the
internal library, and we can call from liblvm. In the future, we should
refactor lv_create_single further, probably by segtype, to reduce the
size of struct lvcreate_params. For now this is a reasonable refactor
and allows us to re-use the function from liblvm.
Author: Dave Wysochanski <dwysocha@redhat.com>
In preparation for implicit pvcreate during vgcreate / vgextend,
move bulk of pvcreate logic inside library.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
