IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the number of stripes requested is incompatible with the requested
type of raid, give an error instead of adjusting it.
If no stripes argument is supplied, continue to use an appropriate
default.
a579ba2ac2 fixed a regression causing a segfault if no external
origin existed but broke the logic leading to erroneous error
messages and creations of split off exported VGs in case the
external origin and the pool LVs were allocated on different PVs.
- resolves rhbz1367459
Creating a RaidLV in VGs with very small extent sizes caused
late failure in the kernel giving a not very informative error
message. Catch the attempt early and display failure message
'Unable to create RAID LV: requires minimum VG extent size 4.00 KiB'.
- resoves rhbz1179970
'pvmove -n name pv1 pv2' called with the name of a top-level LV
failed with mentioned commit.
Enhance pvmove-raid-segtypes.sh to test for prohibited RAID SubLV moves.
'pvmove -n name pv1 pv2' allows to collocate multiple RAID SubLVs
on pv2 (e.g. results in collocated raidlv_rimage_0 and raidlv_rimage_1),
thus causing loss of resilence and/or performance of the RaidLV.
Fix this pvmove flaw leading to potential data loss in case of PV failure
by preventing any SubLVs from collocation on any PVs of the RaidLV.
Still allow to collocate any DataLVs of a RaidLV with their sibling MetaLVs
and vice-versa though (e.g. raidlv_rmeta_0 on pv1 may still be moved to pv2
already holding raidlv_rimage_0).
Because access to the top-level RaidLV name is needed,
promote local _top_level_lv_name() from raid_manip.c
to global top_level_lv_name().
- resolves rhbz1202497
Adding MetaLVs to given DataLVs (e.g. raid0 -> raid0_meta takeover),
_avoid_pvs_with_other_images_of_lv() was missing code to prohibit
allocation when called with a just allocated MetaLV to prohibit
collaocation of the next allocated MetaLV on the same PV.
- resolves rhbz1366738
When lvm is compiled with --enable-notify-dbus and a user uses lvm
shell, after they issue 200+ commands the lvm shell will hang for
~30 seconds trying to notify the lvm dbus service that a change
has occurred. This appears to be caused by resource exhaustion,
because the sockets used for dbus communication are not be closed.
Enforce mirror/raid0/1/10/4/5/6 type specific maximum images when
creating LVs or converting them from mirror <-> raid1.
Document those maxima in the lvcreate/lvconvert man pages.
- resolves rhbz1366060
Some settings are not suitable for override in interactive/shell
mode because such settings may confuse the code and it may end
up with unexpected behaviour. This is because of the fact that
once we're in the interactive/shell mode, we have already applied
some settings for the shell itself and we can't override them
further because we're already using those settings to drive the
interactive/shell mode. Such settings would get ignored silently
or, in worse case, they would mess up the existing configuration.
When lvm commands are executed in lvm shell, we cover the whole lvm
command execution within this shell now. That means, all messages logged
and status caught during each command execution is now recorded in the
log report, including overall command's return code.
The dm_report_group_output_and_pop_all calls dm_report_output and
dm_report_group_pop for all the items that are currently in report
group. This is just a shortcut that makes it easier to output and
pop group's content so the group handle can be reused again without
a need to initialize and configure it again.
The functionality of dm_report_group_output_and_pop_all is the
same as dm_report_destroy but without destroying the report group
handle.
This patch moves printing of starting '{' character for JSON output up
untili it's known there's any further output following - either the
content or ending '}' character.
Also, remove unnecessary switch for different report group types and
calling individual functions to handle dm_report_group_create as that
code is shared for all existing types at the moment.
Calling dm_report_destroy_rows makes it possible to destroy any report
content we have but at the same time it doesn't destroy the report
handle itself, thus it's possible to reuse that handle again for new
report content.
Functionally, this is the same as calling dm_report_output with the
report handle but omitting the output iself. This functionality may
be useful if we, for whatever reason, need to discard the report
content and start a fresh new one but with the same report configuration
and initialization and thus we can just reuse the existing handle.
We may call arg_count/grouped_arg_count/arg_value soon enough that
cmd->arg_values is not set yet.
Normally, when running a command, we execute lvm_run_command which in
turn calls _process_command_line to allocate and parse the command line
values and stores them in cmd->arg_values.
However, if we run lvm shell, this one doesn't accept any command line
options and we parse the command line for each command that is executed
within the lvm shell then. If we used any code that tries to access
cmd->arg_values through any of the the arg handling functions too
early, we could end up with a segfault due to uninitialized (NULL)
cmd->arg_values.
This patch just saves extra checks in all the code where arg handling
may be called too early so that the cmd->arg_values is not set up yet.
This does not apply to any of existing code, but subsequent patches
will need that.
With patches that will follow, this will make it possible to widen log
report coverage when commands are executed from lvm shell so the amount
of messages that may end up in stderr/stdout instead of log report are
minimized.
Add new log_context=shell and with log_object_type=cmd and
log_object_name=<command_name> for command log report to collect
overall return code from last command (this is reported under
log_type=status).
Currently, the output is separated in 3 parts and each part can go into
a separate and user-defined file descriptor:
- common output (stdout by default, customizable by LVM_OUT_FD environment variable)
- error output (stderr by default, customizable by LVM_ERR_FD environment variable)
- report output (stdout by default, customizable by LVM_REPORT_FD environment variable)
For example, each type of output goes to different output file:
[0] fedora/~ # export LVM_REPORT_FD=3
[0] fedora/~ # lvs fedora vg/abc 1>out 2>err 3>report
[0] fedora/~ # cat out
[0] fedora/~ # cat err
Volume group "vg" not found
Cannot process volume group vg
[0] fedora/~ # cat report
LV VG Attr LSize Layout Role CTime
root fedora -wi-ao---- 19.00g linear public Wed May 27 2015 08:09:21
swap fedora -wi-ao---- 500.00m linear public Wed May 27 2015 08:09:21
Another example in LVM shell where the report goes to "report" file:
[0] fedora/~ # export LVM_REPORT_FD=3
[0] fedora/~ # lvm 3>report
(in lvm shell)
lvm> vgs
(content of "report" file)
[1] fedora/~ # cat report
VG #PV #LV #SN Attr VSize VFree
fedora 1 2 0 wz--n- 19.49g 0
(in lvm shell)
lvm> lvs
(content of "report" file)
[1] fedora/~ # cat report
VG #PV #LV #SN Attr VSize VFree
fedora 1 2 0 wz--n- 19.49g 0
LV VG Attr LSize Layout Role CTime
root fedora -wi-ao---- 19.00g linear public Wed May 27 2015 08:09:21
swap fedora -wi-ao---- 500.00m linear public Wed May 27 2015 08:09:21
RAID6 LVs may not be created with --nosync or data corruption
may occur in case of device failures. The underlying MD raid6
personality used to drive the RaidLV performs read-modify-write
updates on stripes and thus relies on properly written parity
(P and Q Syndromes) during initial synchronization.
Once on it, enhance test to create/extend more and
larger RaidLVs and check sync/nosync status.
Commit 76ef2d15d8 introduced
raid0 <-> raid4 takeover and full mirror <-> raid1 support.
Add tests for these conversions.
Tests exposed a kernel semantics change freezing resynchronization
on conversions from raid0[_meta] -> raid4 or adding raid1 legs
because kernel kept the RAID mapped device in 'frozen' state unless
an 'idle' message was sent or the table was reloaded (kernel patch pending).
