IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
lvm has a default umask value in the config file that defaults
to 0077 which lvm changes to during normal operation. This
causes a problem when the code is used as a library with
liblvm as it is changing the umask for the process. This
patch saves off the current umask, sets to what is specified
in the config file and restores it what it was on library
function call exit.
The user is now free to change the umask in their application at
anytime including between library calls.
This fix address BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1012113
Tested by setting umask to 0777 and running the python unit
test and verifying that umask is still same value as expected
at the test completion and with a successful run.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Add a PV create which takes a paramters object that
has get/set method to configure PV creation.
Current get/set operations include:
- size
- pvmetadatacopies
- pvmetadatasize
- data_alignment
- data_alignment_offset
- zero
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=880395
Signed-off-by: Tony Asleson <tasleson@redhat.com>
The function lvm_vg_list_lvs was returning all logical
volumes, including *_tmeta and *_tdata. Added check
to verify that LV is visible before including in list
of returned logical volumes.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Add thin and thin pool lv creation support to lvm library
This is Mohan's thinp patch, re-worked to include suggestions
from Zdenek and Mohan.
Rework of commit 4d5de8322b
which uses refactored properties handling.
Based on work done by M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Tony Asleson <tasleson@redhat.com>
After the last rebase, existing unit test case was
run which uncovered a number of errors that required
attention.
Uninitialized variables and changes to type of numeric
return type were addressed.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Add thin and thin pool lv creation support to lvm library
This is Mohan's thinp patch, re-worked to include suggestions
from Zdenek and Mohan.
V2: Remove const lvm_lv_params_create_thin
Add const lvm_lv_params_skip_zero_get
V3: Changed get/set to use generic functions like current
property
V4: Corrected macro in properties.c
V5: Fixed a bug in liblvm/lvm_lv.c function lvm_lv_create.
incorrectly used pool instead of lv_name when doing the
find_lv_in_vg call.
Based on work done by M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Previously, we have relied on UUIDs alone, and on lvmcache to make getting a
"new copy" of VG metadata fast. If the code which triggers the activation has
the correct VG metadata at hand (the version which is currently on disk), it can
now hand it to the activation code directly.
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
Add a generic VG property function to lvm2app. Call the internal library
vg_get_property() function. Strings are dup'd internally.
Rework lvm_vg_get_property to return lvm_property_value and require caller
to check 'is_valid' flag. If !is_valid, the caller can check lvm_errno()
for the specific error.
Create a 'get_property' function, local to lvm2app, that factors out
most of the common code that copies the components of lvm_property_type
into lvm_property_value. This allows for a 1-line function for each
of the generic property functions exported by lvm2app.
Add supporting functions for pv_uuid, vg_uuid, and lv_uuid.
Call new function id_format_and_copy. Use 'const' where appropriate.
Add "_dup" suffix to indicate memory is being allocated.
Call {pv|vg|lv}_uuid_dup from lvm2app uuid functions.
Everywhere else in the API the caller can rely on lvm2app taking care of
memory allocation and free, so make the 'name' and 'uuid' properties of a
vg/lv/pv use the vg handle to allocate memory.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add lvm2app functions to manage VG tags.
For lvm_vg_get_tags(), we return a list of tags, similar to other
functions that return lists. An empty list is returned if there
are no VG tags. NULL is returned if there is a problem obtaining
the list of tags.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Internally we store sizes in sectors, but lvm2app exports sizes
in bytes. We could get fancier and allow units configuration but
this fix should do for now.
Fixes rhbz561422.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
where we should not expose internal VG names/uuids (the ones with "#" prefix )through the
interface. Otherwise, we could end up with library users opening internal VGs which will
initiate locking mechanism that won't be cleaned up properly.
"#orphans_{lvm1, lvm2, pool}" names are treated in a special way, they are truncated first
to "orphans" and this is used as a part of the lock name then (e.g. while calling lvm_vg_open()).
When library user calls lvm_vg_close(), the original name "orphans_{lvm1, lvm2, pool}"
is used directly and therefore no unlock occurs.
We should exclude internal VG names and uuids in the lists provided by lvmcache:
lvmcache_get_vgids() and lvmcache_get_vgnames().
Rename fill_default_pvcreate_params to pvcreate_params_set_defaults.
Rename pvcreate_validate_restore_params to pvcreate_restore_params_validate.
Rename pvcreate_validate_params to pvcreate_params_validate.
We need defaults for pvcreate_params at a higher level - this will
allow us to use a common function from the tools to take defaults,
then fill in any non-defaults from the commandline.
Future patches will refactor vgcreate/vgextend to call this function
if one or more pvcreate parameters are given on the commandline.
Another refactoring for implicit pvcreate support. We need to get
the pvcreate parameters somehow to the vg_extend routine. Options
seemed to be:
1. Attach the parameters to struct volume_group. I personally
did not like this idea in most cases, though one could make an
agrument why it might be ok at least for some of the parameters
(e.g. metadatacopies).
2. Pass them in to the extend routine. This second route seemed
to be the best approach given the constraints.
Future patches will parse the command line and fill in the actual
values for the pvcreate_single call.
Should be no functional change.
Of the vgs field vg_attr, a few of the most likely to be used attributes
are clustered, exported, and partial. This patch adds the following 3
functions:
uint64_t lvm_vg_is_clustered(const vg_t vg)
uint64_t lvm_vg_is_exported(const vg_t vg)
uint64_t lvm_vg_is_partial(const vg_t vg)
Now that we've refactored the internal library functions that do the
vg_remove, we can handle the deferred commit of a lvm_vg_remove() inside
lvm_vg_write(). This makes the VG create/remove API more consistent in
terms of disk commits - they now both require an lvm_vg_write() to commit
the create or remove to disk.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Split vg_remove_single into vg_remove_check (mandatory checks before
vgremove) and vg_remove (do actual remove by committing to disk).
In liblvm, we'd like to provide an consistent API that allows multiple
changes in memory, then let lvm_vg_write() control the commit to disk. In
some cases (for example, lvresize calls fsadm) this may not be possible.
However, since we are using an object model and dividing things into small
operations, the most logical model seems to be the lvm_vg_write model, and
handling the special cases as they arrive. So as best as possible
we move towards this end.
A possible optimization would be to consolidate vg_remove (committing)
code with vgreduce code. A second possible optimization is making vgreduce
of the last device equivalent to vgremove. Today, lvm_vg_reduce fails if
vgreduce is called with the last device, but from an object model perspective
we could view this as equivalent to vgremove and allow it. My gut feel is
we do not want to do this though.
Author: Dave Wysochanski <dwysocha@redhat.com>
This patch update vg_t handle to be consistent with lvm_t - define as a pointer
to internal struct volume_group.
Author: Dave Wysochanski <dwysocha@redhat.com>
For now, a simple way to enforce the read/write semantics is to just save the
open mode of the VG. If the caller uses lvm_vg_create, the mode is write.
The caller using lvm_vg_open can use either read or write to open the VG.
Once we have this, we enforce the permissions on each API call and don't allow
a caller to modify a VG that has not been opened properly.
This may be better combined with the locking mode, but I view that as future
cleanup, past this initial release. The intial release should enforce the
basic object semantics though, as described in the lvm.h file.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Adding the ability to get the seqno is important for an application to
determine if something has changed in a VG. Otherwise, the only way to
know is to open the VG with write permission and hold the handle.
Extend lvm_vg_write to remove pvs removed in lvm_vg_reduce. The lvm
volume_group internal structure removed_pvs is used for that. The list is
empty afterwards.
Add new test for vg->pvs emptyness to lvm_vg_write to prevent to write empty
vgs. This is needed because of lvm_vg_reduce and lv_vg_create, which creates
empty vgs.
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Acked-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
The two liblvm functions that return a list of vgnames and vguuids use
cmd->mem to allocate the list. Make it clear to the caller that this
memory will be freed when the LVM handle is freed.
Clean up and clarify the return value of the functions. In the
case of a memory allocation error, add a couple log_errnos to the internal
code, and make it clear that memory allocation returns a NULL pointer.
If there are no VGs in the system, the list returned is an empty list.
Make a note of the fact that currently we return hidden VG names, how
these can be detected (always start with "#"), and that they should
not be used.
Author: Dave Wysochanski <dwysocha@redhat.com>
For now, we use the following scheme.
For APIs that return an int, success is 0, fail is -1.
APIs that return handles, success is non-NULL, fail is NULL.
At this early stage, liblvm error handling mechanism is subject to change,
but for now we go with this simple scheme consistent with system
programming.
Author: Dave Wysochanski <dwysocha@redhat.com>
