1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

1509 Commits

Author SHA1 Message Date
Milan Broz
be0938ad3c Properly destroy toolcontext.
(fixes previous commit)
2009-06-17 20:54:20 +00:00
Milan Broz
38ddfe7be5 Fix memory leaks in toolcontext error path.
E.g.
 # vgscan
  Parse error at byte 2360 (line 54): expected a value
  Failed to load config file /etc/lvm/lvm.conf
You have a memory leak (not released memory pool):
 [0x818c788] library (12 bytes)

...
2009-06-15 11:56:31 +00:00
Milan Broz
5cc66af8d6 Re-instate partial activation support in clustered mode. (mornfall) 2009-06-12 08:30:19 +00:00
Petr Rockai
11ee855e40 Allow metadata correction even when PVs are missing. 2009-06-10 20:17:32 +00:00
Dave Wysochanski
fe2b3ea0d4 In the new _vg_read_for_update(), we always do the check for CLUSTERED vg
status flag after reading the volume group.  Thus, no need to set the flag
in vg_read() or clear it later before calling _vg_bad_status_bits().

Also, add back in the !lockingfailed() as part of the CLUSTERED flag check.
It's unclear why it was removed when the check was moved from
_vg_bad_status_bits() to inside _vg_lock_and_read().
There was an open question about the last check in the 'if' stmt for
lockingfailed() with a previous patch submitted.  However, I would
defer that right now as it is a separate item and this patch should
be no functional change by including the !lockingfailed().

Petr acked this patch on 5/26 I just forgot to check it in.

Acked-by: Petr Rockai <prockai@redhat.com>
2009-06-10 16:14:40 +00:00
Dave Wysochanski
07b0c948ee Add vg_lock_newname() library function.
Various tools need to check for existence of a VG before doing something
(vgsplit, vgrename, vgcreate).  Currently we don't have an interface to
check for existence, but the existence check is part of the vg_read* call(s).
This patch is an attempt to pull out some of that functionality into a
separate function, and hopefully simplify our vg_read interface, and
move those patches along.

vg_lock_newname() is only concerned about checking whether a vg exists in
the system.  Unfortunately, we cannot just scan the system, but we must first
obtain a lock.  Since we are reserving a vgname, we take a WRITE lock on
the vgname.  Once obtained, we scan the system to ensure the name does
not exist.  The return codes and behavior is in the function header.
You might think of this function as similar to an open() call with
O_CREAT and O_EXCL flags (returns failure with -EEXIST if file already
exists).

NOTE: I think including the word "lock" in the function name is important,
as it clearly states the function obtains a lock and makes the code more
readable, especially when it comes to cleanup / unlocking.  The ultimate
function name is somewhat open for debate though so later we may rename.
2009-06-09 14:29:10 +00:00
Milan Broz
a908d0030c Suspend virtual origin before real snapshot.
Because preload of table for snapshot can produce snapshot
metadata (in kernel cow header) read.

Code should suspend origin first to avoid possible deadlock
when preloading (thus calling snapshot in-kernel constructor)
for origin with suspended cow device.

(fixes previous commit)
2009-06-06 16:37:15 +00:00
Milan Broz
66086ce962 Fix double releasing of vg when repairing of vg is requested.
Several commands calls process_each_vg() and in provided
callback it explicitly recovers VG if inconsistent.
(vgchange, vgconvert, vgscan)

It means that old VG is released and reread  but the function
above (process_one_vg) tries to unlock and release old VG.

Patch moves the repair logic into _process_one_vg() function.

It always tries to read vg (even inconsistent) and then decides
what to do according new defined parameter.

Also patch unifies inconsistent error messages.

The only slight change if for vgremove command, where
it now tries to repair VG before it removes if force arg is given.
(It works similar way before, just the order of operation changed).
2009-06-05 20:00:52 +00:00
Milan Broz
c26488d348 Use lvconvert --repair instead of vgreduce in mirror dmeventd DSO (mornfall)
Introduce lvconvert --use_policies (mornfall)
2009-06-04 12:01:15 +00:00
Milan Broz
b6deac338f Build shared parts with 'make' command (mpatocka)
When some parts of lvm are built as shared libraries (for example with
--with-snapshots=shared), the 'make' command does not build these parts.
The shared parts are built with 'make install' command.

This bug can be seen if you go to 'lib' subdirectory and type 'make'.
If you type 'make', the shared libraries are not built, if you type
'make all', the shared libraries are built.

The reason for the bug is the line $(SUBDIRS): $(LIB_STATIC)
If make is executed without any arguments, it makes the first target
in the Makefile. If the first target is '$(SUBDIRS): $(LIB_STATIC)',
it only builds static libraries.

This patch moves '$(SUBDIRS): $(LIB_STATIC)' after
include $(top_srcdir)/make.tmpl. make.tmpl contains the 'all' target
as its first target, so 'make' will be equivalent to 'make all' and
shared libraries will be build with 'make' command.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2009-06-03 11:31:06 +00:00
Milan Broz
771e191e99 Fix rename of active snapshot with virtual origin.
Code must suspend/resume virtual origin too when renaming
snaphsot otherwise in kernel old name remains.
2009-06-01 15:55:06 +00:00
Milan Broz
31f55a07db Fix convert polling to ignore LV with different UUID.
When mirror convert polling is started (mainly as backgound process,
in lvchange -a y or in lvconvert itself) it tries to read VG
and LV identified by its name.

Unfortunatelly, the VG can have already different LV under the same name,
and various more or less funny things can happen (note that
_finish_lvconvert_mirror suspends the volume for example).

(the typical example is our testing script which continuously recreates
LVs under the same name in the same VG.)

This patch adds optional uuid parameter which helps to properly
select the monitoring object. For lvconvert polling it is set to LV UUID
and both _get_lvconvert_vg and _get_lvconvert_lv uses it to read proper VG/LV.

(In the pvmove case it is NULL, here we poll for physical volume name).
2009-06-01 14:43:27 +00:00
Milan Broz
59d06d4dc7 Fix log allocation segfault (fix previous commits).
If there is no free area for log, code should break the loop.
(Otherwise it uses uninitializes areas later.)

Easily reproducible using lvconvert --repair
 - kill device with log
 - run lvconvert --repair vg/lv (with no PV usable for log)
2009-06-01 14:23:38 +00:00
Milan Broz
c1fdeec999 Fix readahead calculation problems.
During vgreduce is failed mirror image replaced with error segment,
this segmant type has always area_count == 0.
Current code expects that there is at least one area with device,
patch fixes it by additional check (fixes segfault during vgreduce).

Also do not calculate readahead in every lv_info call, we only need
to cache PV readahead before activation calls which locks memory.
2009-06-01 12:43:31 +00:00
Alasdair Kergon
eca971ca6c Remove verbose 'visited' messages. 2009-05-30 01:54:29 +00:00
Alasdair Kergon
5cffbf0bb0 Handle multi-extent mirror log allocation when smallest PV has only 1 extent. 2009-05-30 00:09:27 +00:00
Alasdair Kergon
5746e2e769 When creating new LV, double-check that name is not already in use. 2009-05-28 01:59:37 +00:00
Alasdair Kergon
ca51e5d9ec Remove /dev/vgname/lvname symlink automatically if LV is no longer visible. 2009-05-28 01:11:29 +00:00
Alasdair Kergon
ea0e5e6ea8 Rename internal vorigin LV to match visible LV. 2009-05-28 00:29:14 +00:00
Alasdair Kergon
99113cc588 Suppress 'removed' messages displayed when internal LVs are removed.
Fix lvchange -a and -p for sparse LVs.
Fix lvcreate --virtualsize to activate the new device immediately.
2009-05-27 18:19:21 +00:00
Alasdair Kergon
ea91a71bb9 Fix counting of virtual origin LVs in vg_validate. (mbroz) 2009-05-27 13:19:34 +00:00
Alasdair Kergon
4884e0e217 Attempt to load dm-zero module if zero target needed but not present. (mbroz) 2009-05-27 13:05:53 +00:00
Alasdair Kergon
25a2e7b80e Pre-release cleanups. 2009-05-21 03:04:52 +00:00
Milan Broz
6ac30c94f2 Fix locking query compatibility with old external locking libraries. 2009-05-20 12:58:03 +00:00
Milan Broz
d396100278 Use readahead of underlying device and not default (smaller) one.
When we are stacking LV over device, which has for some reason
increased read_ahead (e.g. MD RAID), the read_ahead hint
for libdevmapper is wrong (it is zero).

If the calculated read_ahead hint is zero, patch uses read_ahead of underlying device
(if first segment is PV) when setting DM_READ_AHEAD_MINIMUM_FLAG.

Because we are using dev-cache, it also store this value to cache for future use
(if several LVs are over one PV, BLKRAGET is called only once for underlying device.)

This should fix all the reamining problems with readahead mismatch reported
for DM over MD configurations (and similar cases).
2009-05-20 11:09:49 +00:00
Milan Broz
a01e55b6ec Use lock query instead of activate_lv_excl
- switch lvremove to not force activate volume when removing
 - ditto for force resync

 - fix some wrong return codes in lvchange_resync()
2009-05-20 09:55:33 +00:00
Milan Broz
eb91c4eee3 Use suspend with flush when device size was changed during table preload.
This allows online mirror resize, also removes condition to preventing
code to do this.
2009-05-20 09:52:37 +00:00
Milan Broz
fa6dca9f28 Add infrastructure for queriying for remote locks.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.

Patch adds simple clvmd command which queries all nodes
for lock for given resource.

The lock type is returned in reply in text.

(But code currently uses CR and EX modes only.)
2009-05-19 10:38:58 +00:00
Milan Broz
e1b0dce76e Use PV UUID in hash for device name when exporting metadata.
Currently code uses pv_dev_name() for hash when getting internal
"pvX" name.

This produce corrupted metadata if PVs are missing, pv->dev
is NULL and all these missing devices returns one name
(using "unknown device" for all missing devices as hash key).
2009-05-19 09:48:32 +00:00
Milan Broz
0a5e42897e vgcfgrestore should not quietly fail when backup file has missing PVs.
(fixes previous commit: Fix segfault for vgcfgrestore on VG with missing PVs.)
2009-05-19 09:45:33 +00:00
Milan Broz
970f241c52 Check max_lv on only place and force the check only for new volume.
We can temporarily violate max_lv during mirror conversion etc.

(If the operation fails, orphan mirror images are visible to administrator
for manual remove for example. Not that this should ever happen:-)

Force limit only for lvcreate (and vg merge) command.

Patch also adds simple max_lv tests into testsuite
2009-05-13 21:29:10 +00:00
Milan Broz
82cf926094 Remove unneeded import parameter from lv_create_empty. 2009-05-13 21:28:31 +00:00
Milan Broz
afd9ba98c1 Merge lv_is_displayable and lv_is_visible.
Displayable and visible is the same thing.

volumes_count(vg) is now vg_visible_lvs() and always
returns number of LVs from user perspective.
2009-05-13 21:27:43 +00:00
Milan Broz
59d8429cb3 Introduce lv_set_visible & lv_set_invisible and use lv_is_visible always.
The vg->lv_count parameter now includes always number of visible
logical volumes.

Note that virtual snapshot volume (snapshotX) is never visible,
but it is stored in metadata with visible flag.
2009-05-13 21:26:45 +00:00
Milan Broz
b14c5af76d Fix lv_is_visible to handle virtual origin.
Snapshot is visible if its origin is marked visible,
or if the origin is virtual.
2009-05-13 21:25:45 +00:00
Milan Broz
0b706ac672 Introduce link_lv_to_vg and unlink_lv_from_vg functions.
link_lv_to_vg and unlink_lv_from_vg are the only functions
for adding/removing logical volume from volume group.

Only these function should manipulate with vg->lvs list.
2009-05-13 21:25:01 +00:00
Milan Broz
494b4cec7b Tidy format1 import LV function.
Later patch initializes lv->vg after the LV structure is prepared,
so pass through cmd context and do not use vg->cmd here.
Also move LV id calculation (which uses lv->vg too).

Also properly free memory pool if operation fails.
2009-05-13 21:24:12 +00:00
Milan Broz
d60f341d96 Remove vg->lv_count and use counter function.
This should not cause problems but simplifies code a lot.

(the volumes_count is merged and renamed with lvs_visible
function by following patch.)
2009-05-13 21:22:57 +00:00
Milan Broz
4b13d5a823 Fix snapshot segment import to not use duplicate segments & replace.
The snapshot segment (snapshotX) is created twice
during the text metadata segment processing.

This can cause temporary violation of max_lv count.

Simplify the code, snapshot segment is properly initialized
in init_snapshot_seg function now and do not need to be replaced
by vg_add_snapshot call.

The vg_add_snapshot() is now usefull only for adding new
snapshot and it shares the same initialization function.

The snapshot name is always generated, name paramater can be
removed from function call.
2009-05-13 21:21:58 +00:00
Zdenek Kabelac
cfebc626b6 Do not query nonexistent devices for readahead. 2009-05-13 14:13:54 +00:00
Dave Wysochanski
5a820745ce Remove NON_BLOCKING lock flag from tools and set a policy to auto-set.
As a simplification to the tools and further liblvm, this patch pushes
the setting of NON_BLOCKING lock flag inside the lock_vol() call.
The policy we set is if any existing VGs are currently locked, we
set the NON_BLOCKING flag.

Should be no functional change.
2009-05-13 13:02:52 +00:00
Alasdair Kergon
b44e3bdc86 better variable name for snapshot counting 2009-05-13 01:48:18 +00:00
Milan Broz
2f9a9d1a7f Remove snapshot_count from VG and use function instead. 2009-05-12 19:12:09 +00:00
Milan Broz
920e68d603 Fix first_seg() call for empty segment list.
The seg variable is temporary variable for list iterator,
code cannot expect that after iteration it remains NULL
(it contains non-NULL pointer here id list is empty).

Patch fixes first_seg function so it now correctly returns NULL
for empty segment list.
2009-05-12 19:09:21 +00:00
Milan Broz
5c93cdba2d Fix PV datalign when for values starting prior to MDA area.
The dataalign value must always be aligned according
to MDA area.
The currect code checks if calculated value collides with
MDA area but not if the value is so small that it is
located before MDA starts.

Unfortunatelly there can be also MDA in the end of the device.

The patch adds simple check to avoid this miscalculation.
Patch expects that first MDA always starts on <= pagesize boundary
(this is true for all allowed label sector parameters).
2009-05-07 12:11:50 +00:00
Milan Broz
610646095b Use zalloc in initialization of device manager (to zero pvmove mirror count). 2009-05-07 12:01:21 +00:00
Dave Wysochanski
14f5aa2753 Update columns.h comment. 2009-05-06 15:25:23 +00:00
Dave Wysochanski
e08ad14696 Fix error path in vg_make_handle().
Enter the error condition if either of the allocations fail, and
don't use dm_pool_zalloc if dm_pool_create fails.
2009-04-28 17:46:47 +00:00
Alasdair Kergon
87f42fda5e Add sparse devices: lvcreate -s --virtualoriginsize (hidden zero origin).
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.

Still a few rough edges, but hopefully usable now:
  lvcreate -s vg1 -L 100M --virtualoriginsize 1T
2009-04-25 01:17:59 +00:00
Milan Broz
bf3423d355 Fix pool leak in lvmcache_read_vg error path.
(Introduced in previous patches.)
2009-04-24 12:03:55 +00:00