IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This function behaves a little bit different than vg_reduce_single, because
it allowes to remove even the latest pv. This has been done to be consistent
to lvm_vg_create, which creates an empty vg.
removed_pvs has been added to the volume_group struct. vg_reduce adds remove
pvs to this list to be able to commit the changes for the pvs in lvm_vg_comm
in liblvm2app.
Initialize removed_pvs list in format-specific volume_group constructors.
Ideally, we should have a base constructor here that initializes the general
non-format specific members of struct volume_group. But until then, there
are multiple places to initialize these members. Maybe a better patch would
be a base constructor patch for struct volume_group. That is more work
though.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
The two liblvm functions that return a list of vgnames and vguuids use
cmd->mem to allocate the list. Make it clear to the caller that this
memory will be freed when the LVM handle is freed.
Clean up and clarify the return value of the functions. In the
case of a memory allocation error, add a couple log_errnos to the internal
code, and make it clear that memory allocation returns a NULL pointer.
If there are no VGs in the system, the list returned is an empty list.
Make a note of the fact that currently we return hidden VG names, how
these can be detected (always start with "#"), and that they should
not be used.
Author: Dave Wysochanski <dwysocha@redhat.com>
For liblvm 'get' functions, we should share code with the reporting functions.
This means we need common code to return the values for the fields.
In this patch we refactor a few of the fields needed in liblvm.
Unfortunately, for the simple fields that do derefernces of structure
members (for example, vg_extent_count), we cannot call the common function
from the reporting infrastructure without more refactoring. The reason is
that the dereference of the simple fields is done deep inside the reporting
code (to get the generic "data" pointer), and the display function is a
generic 'size32' function. We can fix these issues later with more
refactoring.
Should be no functional change and the testsuite should cover any possible
regressions. The only fields in the report affected by this patch are:
vg_size, vg_free, and pv_mda_count.
Author: Dave Wysochanski <dwysocha@redhat.com>
After some refactorings, we can now move the bulk of _lvcreate into the
internal library, and we can call from liblvm. In the future, we should
refactor lv_create_single further, probably by segtype, to reduce the
size of struct lvcreate_params. For now this is a reasonable refactor
and allows us to re-use the function from liblvm.
Author: Dave Wysochanski <dwysocha@redhat.com>
The implicit pvcreate require either moving the ORPHAN_VG lock outside
pvcreate_single or somehow having the function know or detect whether
the ORPHAN_VG lock is already held.
Author: Dave Wysochanski <dwysocha@redhat.com>
Passing NULL for pvcreate parameters gives you default parameters for
pvcreate_single.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
In preparation for implicit pvcreate during vgcreate / vgextend,
move bulk of pvcreate logic inside library.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
We must hold the VG_ORPHAN lock until we commit to disk. Otherwise,
we risk a race condition on vgcreate / vgextend. Reverts the following
commit:
commit 72a41480ba
Author: Dave Wysochanski <dwysocha@redhat.com>
Date: Fri Jul 10 20:09:21 2009 +0000
Move orphan lock obtain/release inside vg_extend().
With this change we now have vgcreate/vgextend liblvm functions.
Note that this changes the lock order of the following functions as the
orphan lock is now obtained first. With our policy of non-blocking
second locks, this should not be a problem.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
These messages are unnecessary in the set functions. We check for this
condition and print a message in the vgchange tool but not the library
functions.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When converting to the new liblvm functions, the vgcreate code path
changed to create a new vg, then set values. As a result of this
change, and the fact that we give a user a message if they try to
set the same value of a VG attribute (extent_size, alloc_policy, etc),
you'll see these 2 extraneous "is already" messages with vgcreate:
tools/lvm vgcreate vg2 /dev/loop2
Physical extent size of VG vg2 is already 4.00 MB
Volume group allocation policy is already normal
Volume group "vg2" successfully created
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Author: Dave Wysochanski <dwysocha@redhat.com>
Since we are using errno values, we should use '0' as a default value
which indicates a non-error, rather than defining some made-up default
value that is not defined in errno. If we need to deviate from errno
values, this will most likely indicate a flaw in our design.
Add prototypes for lvm_errno and lvm_errmsg inside lvm.h and provide
a basic description of their function. This fixes a couple compile
warnings.
Author: Dave Wysochanski <dwysocha@redhat.com>
We provide a lock type that behaves like no_locking, but is not
clustered. Moreover, it also forbids any write locks. This magically (and
consistently) prevents use of clustered VGs, or changing local VGs with
--ignorelockingfailure. As a bonus, we can remove the special hacks in a few
places. Of course, people looking for trouble can always set their locking_type
to 0 to override.
Define the 5 main liblvm objects to be the pv, vg, lv, lvseg, and pvseg.
We need handles defined to all these objects in order for liblvm to be
equivalent to the reporting commands pvs, vgs, and lvs.
- move vg_t, lv_t, and pv_t from metadata-exported.h into lvm.h
- move lv_segment and pv_segment forward declarations into lvm.h
- add lvseg_t and pvseg_t to lvm.h
NOTE: We currently have an inconsistency in handle definitions.
lvm_t is defined as a pointer, while these other handles are just
structures. We should pick one scheme and be consistent - perhaps
define all handles as pointers (this is what I've seen elsewhere).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
The checks for RESIZEABLE_VG should now be inside the various functions that
have to do such operations.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Remove READ_REQUIRE_RESIZEABLE flag from vgsplit similar to the removal from
vgextend. Move the check inside the functions that actually move pvs from
one vg structure to another. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
In the future we may export these functions or something like them in liblvm
For now this helps in cleaning up the checks for RESIZEABLE since we can
use the internal library function vg_bad_status_bits.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Move the check for the RESIZEABLE flag inside the vg_extend function.
When we consolidated the vg locking, reading, and status flag checking,
we tied the check for the RESIZEABLE flag to the vg_read() call. The problem
with this is you cannot know what other APIs the application my or may not
call after a vg_read() call. Thus the READ_REQUIRE_RESIZEABLE flag is not
really ideal - ideally we should be checking for this flag on a specific
operation, not inside the vg_read() call. This patch moves one check inside
the library.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
xlate64 produces unsigned long long type, but PRIu64 is defined
to accept argument unsigned long type (on 64-bit machines).
On existing machines, both types have the same size, so it works,
but it is still wrong and produces a warning.
Fix it by using a cast to uint64_t --- according to the standard,
PRIu64 argument matches type uint64_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
With this change we now have vgcreate/vgextend liblvm functions.
Note that this changes the lock order of the following functions as the
orphan lock is now obtained first. With our policy of non-blocking
second locks, this should not be a problem.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Move the vg orphan lock inside vg_remove_single, now a complete liblvm
function. Note that this changes the order of the locks - originally
VG_ORPHAN was obtained first, then the vgname lock. With the current
policy of non-blocking second locks, this could mean we get a failure
obtaining the orphan lock. In the case of a vg with lvs being removed,
this could result in the lvs being removed but not the vg. Such a
scenario could have happened prior though with a different failure.
Other tools were examined for side-effects, and no major problems
were noted.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Move check for active LVs outside of library function. The vgremove
liblvm function function will fail if there are active LVs. It will
be the application's responsibility to check this condition and remove
the LVs individually before calling vgremove. Note also that we've
duplicated the EXPORTED_VG check in vgremove_single (tools) and
vg_remove_single (library). Duplication seemed the only option here
since we don't want to do the automatic removal of LVs (in the tools)
if the vg is exported, and we still need to protect the library call
from removal if the vg is exported.
We still need to deal with the ORPHAN lock but vg_remove_single is now
very close to our liblvm function.
TODO: Refactor lvremove in a similar way.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
If there is syntax error in metadata, it now prints messages
like:
Couldn't read 'start_extent' for segment 'extent_count'.
Couldn't read all logical volumes for volume group vg_test.
The segment specification is wrong and confusing.
Patch fixes it by introducing "parent" member in config_node which
points to parent section and config_parent_name function, which
provides pointer to node section name.
Also it adds several LV references where possible.
vg_t *vg_create(struct cmd_context *cmd, const char *vg_name);
This is the first step towards the API called to create a VG.
Call vg_lock_newname() inside this function. Use _vg_make_handle()
where possible.
Now we have 2 ways to construct a volume group:
1) vg_read: Used when constructing an existing VG from disks
2) vg_create: Used when constructing a new VG
Both of these interfaces obtain a lock, and return a vg_t *.
The usage of _vg_make_handle() inside vg_create() doesn't fit
perfectly but it's ok for now. Needs some cleanup though and I've
noted "FIXME" in the code.
Add the new vg_create() plus vg 'set' functions for non-default
VG parameters in the following tools:
- vgcreate: Fairly straightforward refactoring. We just moved
vg_lock_newname inside vg_create so we check the return via
vg_read_error.
- vgsplit: The refactoring here is a bit more tricky. Originally
we called vg_lock_newname and depending on the error code, we either
read the existing vg or created the new one. Now vg_create()
calls vg_lock_newname, so we first try to create the VG. If this
fails with FAILED_EXIST, we can then do the vg_read. If the
create succeeds, we check the input parameters and set any new
values on the VG.
TODO in future patches:
1. The VG_ORPHAN lock needs some thought. We may want to treat
this as any other VG, and require the application to obtain a handle
and pass it to other API calls (for example, vg_extend). Or,
we may find that hiding the VG_ORPHAN lock inside other APIs is
the way to go. I thought of placing the VG_ORPHAN lock inside
vg_create() and tying it to the vg handle, but was not certain
this was the right approach.
2. Cleanup error paths. Integrate vg_read_error() with vg_create and
vg_read* error codes and/or the new error APIs.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
NOTE: vg_set_alloc_policy() returns success if you try to set a value that
is already stored. The behavior of vgchange is the same though - it fails.
There is a fixme noted in the code about this inconsistency, which should
be resolved if possible.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
In liblvm, we will reserve the word 'change' to mean an API that
both sets one or more values, and commits to disk. This will be
consistent with the LVM commandline. The existing vg_change_pesize()
function does not commit to disk, but just changes the extent_size
and ensures all internal structures are updated. This logic should
be contained in a function that sets the value.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
It would be nice to have one function that does all the validation
and setting of the VG's pesize. However, currently some checks
are in the higher-level function _vgchange_pesize(), and some
checks are in the lower function vg_change_pesize().
This patch moves most of the higher-level checks inside
vg_change_pesize. In one case a failure return code is
changed from ECMD_FAILED to EINVALID_CMD_LINE.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Remove unneeded LOCK_NONBLOCKING from vg_read() API and tools that
use it. We no longer need this flag anywhere since we now automatically
set LCK_NONBLOCK inside lock_vol() if vgs_locked().
For further details, see:
commit d52b3fd3fe
Author: Dave Wysochanski <dwysocha@redhat.com>
Date: Wed May 13 13:02:52 2009 +0000
Remove NON_BLOCKING lock flag from tools and set a policy to auto-set.
As a simplification to the tools and further liblvm, this patch pushes
the setting of NON_BLOCKING lock flag inside the lock_vol() call.
The policy we set is if any existing VGs are currently locked, we
set the NON_BLOCKING flag.
At some point it may make sense to add this flag back if we get an
RFE from a liblvm user, but for now let's keep it as simple as
possible.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Remove READ_CHECK_EXISTENCE and vg_might_exist().
This flag and API is no longer used now that we have a separate
API to check for existence.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Remove unneeded LOCK_KEEP from vg_read() interface.
Update comment to clarify cases where _vg_lock_and_read() may return
with an error but the lock held. Would be nice to make the vg_read()
interface consistent with regards to lock held and error behavior.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Update units_to_bytes() to support (S)ectors: 500 bytes.
- 500 byte (S)ectors is of questionable value but it adds to consistency
if a user happens to use --units S. This seems better than an error.
Updated test/t-covercmd.sh to test --units [hS]
Document the units that can be displayed via --units uniformly.
- (p)etabytes and (e)xabytes were missing in pvs, vgs and lvs man pages.
Made lvreduce man page "... in units of megabytes." consistent (with the
lvextend and lvresize man pages).
Sun May 3 13:06:14 CEST 2009 Petr Rockai <me@mornfall.net>
* Don't segfault in vg_release when vg->cmd is NULL.
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 12:32:30 CEST 2009 Petr Rockai <me@mornfall.net>
* Rework the toollib interface (process_each_*) on top of new vg_read.
Rebased 6/26/09 by Dave W.
- Add skipping message to process_each_lv
- Remove inconsistent_t.
Is an application uses query and set major:minor
to device, it should not fallback to default major by default.
Add new function whoich allows that (and use it in lvm2).
E.g.
# vgscan
Parse error at byte 2360 (line 54): expected a value
Failed to load config file /etc/lvm/lvm.conf
You have a memory leak (not released memory pool):
[0x818c788] library (12 bytes)
...
status flag after reading the volume group. Thus, no need to set the flag
in vg_read() or clear it later before calling _vg_bad_status_bits().
Also, add back in the !lockingfailed() as part of the CLUSTERED flag check.
It's unclear why it was removed when the check was moved from
_vg_bad_status_bits() to inside _vg_lock_and_read().
There was an open question about the last check in the 'if' stmt for
lockingfailed() with a previous patch submitted. However, I would
defer that right now as it is a separate item and this patch should
be no functional change by including the !lockingfailed().
Petr acked this patch on 5/26 I just forgot to check it in.
Acked-by: Petr Rockai <prockai@redhat.com>
Various tools need to check for existence of a VG before doing something
(vgsplit, vgrename, vgcreate). Currently we don't have an interface to
check for existence, but the existence check is part of the vg_read* call(s).
This patch is an attempt to pull out some of that functionality into a
separate function, and hopefully simplify our vg_read interface, and
move those patches along.
vg_lock_newname() is only concerned about checking whether a vg exists in
the system. Unfortunately, we cannot just scan the system, but we must first
obtain a lock. Since we are reserving a vgname, we take a WRITE lock on
the vgname. Once obtained, we scan the system to ensure the name does
not exist. The return codes and behavior is in the function header.
You might think of this function as similar to an open() call with
O_CREAT and O_EXCL flags (returns failure with -EEXIST if file already
exists).
NOTE: I think including the word "lock" in the function name is important,
as it clearly states the function obtains a lock and makes the code more
readable, especially when it comes to cleanup / unlocking. The ultimate
function name is somewhat open for debate though so later we may rename.
Because preload of table for snapshot can produce snapshot
metadata (in kernel cow header) read.
Code should suspend origin first to avoid possible deadlock
when preloading (thus calling snapshot in-kernel constructor)
for origin with suspended cow device.
(fixes previous commit)
Several commands calls process_each_vg() and in provided
callback it explicitly recovers VG if inconsistent.
(vgchange, vgconvert, vgscan)
It means that old VG is released and reread but the function
above (process_one_vg) tries to unlock and release old VG.
Patch moves the repair logic into _process_one_vg() function.
It always tries to read vg (even inconsistent) and then decides
what to do according new defined parameter.
Also patch unifies inconsistent error messages.
The only slight change if for vgremove command, where
it now tries to repair VG before it removes if force arg is given.
(It works similar way before, just the order of operation changed).
When some parts of lvm are built as shared libraries (for example with
--with-snapshots=shared), the 'make' command does not build these parts.
The shared parts are built with 'make install' command.
This bug can be seen if you go to 'lib' subdirectory and type 'make'.
If you type 'make', the shared libraries are not built, if you type
'make all', the shared libraries are built.
The reason for the bug is the line $(SUBDIRS): $(LIB_STATIC)
If make is executed without any arguments, it makes the first target
in the Makefile. If the first target is '$(SUBDIRS): $(LIB_STATIC)',
it only builds static libraries.
This patch moves '$(SUBDIRS): $(LIB_STATIC)' after
include $(top_srcdir)/make.tmpl. make.tmpl contains the 'all' target
as its first target, so 'make' will be equivalent to 'make all' and
shared libraries will be build with 'make' command.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When mirror convert polling is started (mainly as backgound process,
in lvchange -a y or in lvconvert itself) it tries to read VG
and LV identified by its name.
Unfortunatelly, the VG can have already different LV under the same name,
and various more or less funny things can happen (note that
_finish_lvconvert_mirror suspends the volume for example).
(the typical example is our testing script which continuously recreates
LVs under the same name in the same VG.)
This patch adds optional uuid parameter which helps to properly
select the monitoring object. For lvconvert polling it is set to LV UUID
and both _get_lvconvert_vg and _get_lvconvert_lv uses it to read proper VG/LV.
(In the pvmove case it is NULL, here we poll for physical volume name).
If there is no free area for log, code should break the loop.
(Otherwise it uses uninitializes areas later.)
Easily reproducible using lvconvert --repair
- kill device with log
- run lvconvert --repair vg/lv (with no PV usable for log)
During vgreduce is failed mirror image replaced with error segment,
this segmant type has always area_count == 0.
Current code expects that there is at least one area with device,
patch fixes it by additional check (fixes segfault during vgreduce).
Also do not calculate readahead in every lv_info call, we only need
to cache PV readahead before activation calls which locks memory.
When we are stacking LV over device, which has for some reason
increased read_ahead (e.g. MD RAID), the read_ahead hint
for libdevmapper is wrong (it is zero).
If the calculated read_ahead hint is zero, patch uses read_ahead of underlying device
(if first segment is PV) when setting DM_READ_AHEAD_MINIMUM_FLAG.
Because we are using dev-cache, it also store this value to cache for future use
(if several LVs are over one PV, BLKRAGET is called only once for underlying device.)
This should fix all the reamining problems with readahead mismatch reported
for DM over MD configurations (and similar cases).
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
Currently code uses pv_dev_name() for hash when getting internal
"pvX" name.
This produce corrupted metadata if PVs are missing, pv->dev
is NULL and all these missing devices returns one name
(using "unknown device" for all missing devices as hash key).
We can temporarily violate max_lv during mirror conversion etc.
(If the operation fails, orphan mirror images are visible to administrator
for manual remove for example. Not that this should ever happen:-)
Force limit only for lvcreate (and vg merge) command.
Patch also adds simple max_lv tests into testsuite
The vg->lv_count parameter now includes always number of visible
logical volumes.
Note that virtual snapshot volume (snapshotX) is never visible,
but it is stored in metadata with visible flag.
link_lv_to_vg and unlink_lv_from_vg are the only functions
for adding/removing logical volume from volume group.
Only these function should manipulate with vg->lvs list.
Later patch initializes lv->vg after the LV structure is prepared,
so pass through cmd context and do not use vg->cmd here.
Also move LV id calculation (which uses lv->vg too).
Also properly free memory pool if operation fails.
The snapshot segment (snapshotX) is created twice
during the text metadata segment processing.
This can cause temporary violation of max_lv count.
Simplify the code, snapshot segment is properly initialized
in init_snapshot_seg function now and do not need to be replaced
by vg_add_snapshot call.
The vg_add_snapshot() is now usefull only for adding new
snapshot and it shares the same initialization function.
The snapshot name is always generated, name paramater can be
removed from function call.
As a simplification to the tools and further liblvm, this patch pushes
the setting of NON_BLOCKING lock flag inside the lock_vol() call.
The policy we set is if any existing VGs are currently locked, we
set the NON_BLOCKING flag.
Should be no functional change.
The seg variable is temporary variable for list iterator,
code cannot expect that after iteration it remains NULL
(it contains non-NULL pointer here id list is empty).
Patch fixes first_seg function so it now correctly returns NULL
for empty segment list.
The dataalign value must always be aligned according
to MDA area.
The currect code checks if calculated value collides with
MDA area but not if the value is so small that it is
located before MDA starts.
Unfortunatelly there can be also MDA in the end of the device.
The patch adds simple check to avoid this miscalculation.
Patch expects that first MDA always starts on <= pagesize boundary
(this is true for all allowed label sector parameters).
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.
Still a few rough edges, but hopefully usable now:
lvcreate -s vg1 -L 100M --virtualoriginsize 1T
Run backup of metadata on remote nodes in the
same place like local node - when calling backup().
Introduce backup_locally() which calls only
local backup if needed.
Remote backup is now trigerred by LCK_VG_BACKUP flag
combination (special VG lock).
This lock type will call check_current_backup()
(including backup_locally() call) and updates
metadata on all nodes.
(Patch fixes non-functional remote backup,
current call during VG lock never triggers.)
The backup() call store metadata from memory.
But in cluster backup() call performs
remote nodes metadata backup and it reads data from disk.
For metadata backup consistency,
patch moves all backup() calls after vg_commit.
(Moreover, some tools already do that this way.)
# pvs -a -o devices
Volume group name (null) has invalid characters
Skipping volume group (null)
...
_pvsegs_sub_single creates fake vg, we need to check
that pv is real here.
Since now, all code reading volume group is responsible for releasing
the memory allocated by calling vg_release(vg).
(For simplicity of use, vg_releae can be called for vg == NULL,
the same logic like free(NULL)).
Also providing simple macro for unlocking & releasing in one step,
tools usualy uses this approach.
The global memory pool (cmd->mem) should be used only for global
physical volume operations.
This patch have to be applied with all subsequent patches to complete
memory pool per vg logic.
Using separate memory pool has quite bit memory saving impact when
using large VGs, this is mainly needed when we have to use
preallocated and locked memory (and should not overflow from that
memory space).
The all_pvs list, used in vg_read, should make its own private
copy of pv structures, otherwise (when vg will use its own pool)
it will point to released memory pool.
The same applies for get_pvs() call.
Patch adds pv_list copy helper and adds explicit memory pool
parameter into _copy_pv.
(Please note that all these helper functions cannot guarantee that
vg related fields are valid - proper vg read & lock must be used
if it is requested.)
Patch fixes these problems:
- during the snapshot creation process, it needs create 2 LVs,
one is cow, second becomes snapshot.
If the code fails in vg_add_snapshot, code lvcreate will not remove
LV cow volume.
- if max_lv is set and VG contains snapshot, it can happen that
during the activation lv_count is temporarily increased over the limit
and VG metadata are not properly processed
see https://bugzilla.redhat.com/show_bug.cgi?id=490298
- vgcfgrestore alows restore with max_lv set to lower valuer that actual
LV count. This later leads to situation that max_lv is completely ignored.
- vgck doesn't call vg_validate(). It should at least try:-)
Signed-off-by: Milan Broz <mbroz@redhat.com>
The original liblvm.a has been moved to liblvm-internal.a.
We now use liblvm.a for the new application library and build
it inside liblvm directory.
Change dependencies so tools depend on liblvm application library,
and application library depends on liblvm internal.
if rlocn not defined (there is no metadata area).
In most cases it fails in validate_name(),
unfortunately there are situatuions, when
validate_name is ok and later code fails with
checksum error.
Reproducer:
# dd if=/dev/zero of=/dev/loop0
# pvcreate --metadatasize 637k /dev/loop0
Physical volume "/dev/loop0" successfully created
# pvs /dev/loop0
/dev/loop0: Checksum error
PV VG Fmt Attr PSize PFree
/dev/loop0 lvm2 -- 1.00M 1.00M
Signed-off-by: Milan Broz <mbroz@redhat.com>
-
Using argv[] list in exec_cmd() to allow more params for external commands.
Fsadm does not allow checking mounted filesystem.
Fsadm no longer accepts 'any other key' as 'no' answer to y/n.
Fsadm improved handling of command line options.
New structure lvm (used as an alias to cmd_context), new type definition lvm_t
for the lvm handle. Added functions lvm_create, lvm_destroy and
lvm_reload_config using the new handle.
Modified test/api/test.c:
Use new lvm.h header file and lvm_t handle.
Removed lib/lvm2.h
Author: Thomas Woerner <twoerner@redhat.com>
This patch is not fully tested and leaves some related bugs unfixed.
Intended behaviour of the code now:
pe_start in the lvm2 format PV label header is set only by pvcreate (or
vgconvert -M2) and then preserved in *all* operations thereafter.
In some specialist cases, after the PV is added to a VG, the pe_start
field in the VG metadata may hold a different value and if so, it
overrides the other one for as long as the PV is in such a VG.
Currently, the field storing the size of the data area in the PV label
header always holds 0. As it only has meaning in the context of a
volume group, it is calculated whenever the PV is added to a VG (and can
be derived from extent_size and pe_count in the VG metadata).
When reporting explicitly label attributes (pv_uuid for example), we do not
need to read metadata.
This patch separate the label fileds and removes scan_vgs_for_pvs
in process_each_pv() if not needed.
(There should be no user visible change in output.)
We display '0' for these fields now in this case. Ideally these values are
undefined for an orphan PV but today there is no way to specify undefined
with display functions such as _size64_disp().
Reports the size of the smallest metadata area in a PV or a VG.
Useful to confirm pvcreate --metadatasize or pvmetadatasize setting in
/etc/lvm/lvm.conf file.
NOTE: Actual value in these fields will most always differ from that
given in pvcreate options due to rounding and alignment effects.
pvcreate $DEV
vgcreate -s 1k vg_test $DEV
lvcreate -l 1 -n lv1 vg_test
..
/dev/vg_test/lv1: write failed after 1024 of 4096 at 0: No space left on device
Just check for maximum write size in set_lv.
It fails for 1k PE now.
Patch adds log_region_size into allocation habdle struct
and use it in _alloc_parallel_area() for proper log size calculation
instead of hardcoded 1 extent - which can fail.
Reproducer for incorrect log size calculation:
DEV=/dev/sd[bcd]
pvcreate $DEV
vgcreate -s 1k vg_test $DEV
lvcreate -m1 -L 12M -n mirr vg_test
https://bugzilla.redhat.com/show_bug.cgi?id=477040
The log size calculation is mostly copied from kernel code.
Check for major/minor collision is added in _add_dev_to_dtree()
where we already read info by uuid,
so in the case of requesting major/minor it queries device-mapper
by major/minor for device availability.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=204992
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
This allows us to remove one argument from create_toolcontext() and
moves it closer to a generic library init function.
In the arg_*() functions, we just use _the_args() directly.
For now we leave the first parameter to these
arg_*() functions (struct cmd_context *) because
of the number of files involved in removing the
parameter.
Problem is dm_report_init() may return NULL and subsequent call to
dm_report_set_output_field_name_prefix() doesn't handle NULL value.
Example:
pvs --nameprefixes --rows --unquoted --noheadings -opv_name,fred
Logical Volume Fields
---------------------
lv_uuid - Unique identifier
lv_name - Name. LVs created for internal use are enclosed in brackets.
...
Physical Volume Segment Fields
------------------------------
pvseg_start - Physical Extent number of start of segment.
pvseg_size - Number of extents in segment.
Unrecognised field: fred
Segmentation fault
Move init_full_scan_done(0) and init_mirror_in_sync(0) from init_lvm()
after call to create_toolcontext() to _init_globals(), called from bottom
of create_toolcontext(). No functional change.
Author: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: James Cameron <james.cameron@hp.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
