IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When a user explicitly sets a new mda ignore value for a PV, we
should update vg_mda_copies accordingly. When the VG is written
out, the user would not want the new ignore state to get lost as
a result of the vg_mda_copies value and logic in the vg_write
path.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Compare the value of the newly added vg_mda_copies field
(--vgmetadatacopies parameter) with the current count of
in-use mdas and ignoring or unignoring mdas as necessary to
get to the target count. Also, as a safety check before
returning, ensure we have at least one mda enabled.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Update logic in vgchange to handle --vgmetadatacopies, allow
--metadatacopies as a synonym to --vgmetadatacopies,
and add these parameters to args.h and commands.h
Forbit both --vgmetadatacopies and --metadatacopies as only
one allowed.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds the ability to read/write the vg->mda_copies values
from/to the vg metadata.
If we read the VG metadata and this field does not exist, we set
mda_copies to the default value of 0. Later in the code, we use
this special '0' value to indicate a disable of metadata balancing.
This should preserve existing LVM behavior and ensure metadata balancing
can be turned off should the need arise.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds the get and partially implemented set function.
The 'set' function should probably ignore or un-ignore metadata areas
based on new values.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a field to struct volume_group to later implement metadata
balancing:
- mda_copies: target # of non-ignored mdas in the VG; default 0 (do
not control pv 'ignore mdas' bit.
This patch just adds the parameter to the structures with the default
values but does not modify any commands. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds a vgmetadatacopies parameter for metadata balancing.
This parameter provides a simple way for users to create a policy for
placing metadata on PVs automatically by LVM. The behavior is implemented
inside LVM by managing the 'ignore' mda bits. We chose the name
'vgmetadatacopies' as this is a natural extension to the existing parameter
'pvmetadatacopies' / 'metadatacopies' in pvcreate.
This is a first step at VG parameter based metadata balancing. Most users
will probably want to state that they want a certain number of PVs to contain
metadata, and they may be less concerned about a specific number of metadata
copies in the volume group. However, for default values (pvmetadatacopies
is 1 by default), the number of metadatacopies in the volume group, and the
number of PVs with metadata are the same. In the future we could add
vgmetadatacopiespvs to define more specifically the number of pvs in the
VG that contain metadata, but for now we start with this parameter.
Another possible future extension would be to define a specific pv tag
to mark the set of PVs that should be used for metadata balancing. This
tag based approach could be used in conjunction with 'vgmetadatacopies'.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Arrange mdas so mdas that are to be ignored come first. This is an
optimization that ensures consistency on disk for the longest period of time.
This was noted by agk in review of the v4 patchset of pvchange-based mda
balance.
Note the following example for an explanation of the background:
Assume the initial state on disk is as follows:
PV0 (v1, non-ignored)
PV1 (v1, non-ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
If we did not sort the list, we would have a commit sequence something like
this:
PV0 (v2, non-ignored)
PV1 (v2, ignored)
PV2 (v2, ignored)
PV3 (v2, non-ignored)
After the commit of PV0's mdas, we'd have an on-disk state like this:
PV0 (v2, non-ignored)
PV1 (v1, non-ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
This is an inconsistent state of the disk. If the machine fails, the next
time it was brought back up, the auto-correct mechanism in vg_read would
update the metadata on PV1-PV3. However, if possible we try to avoid
inconsistent on-disk states. Clearly, because we did not sort, we have
a greater chance of on-disk inconsistency - from the time the commit of
PV0 is complete until the time PV3 is complete.
We could improve the amount of time the on-disk state is consistent by simply
sorting the commit order as follows:
PV1 (v2, ignored)
PV2 (v2, ignored)
PV0 (v2, non-ignored)
PV3 (v2, non-ignored)
Thus, after the first PV is committed (in this case PV1), on-disk we would
have:
PV0 (v1, non-ignored)
PV1 (v2, ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
This is clearly a consistent state. PV1 will be read but the mda will be
ignored. All other PVs contain v1 metadata, and no auto-correct will be
required. In fact, if we commit all PVs with ignored mdas first, we'll
only have an inconsistent state when we start writing non-ignored PVs,
and thus the chances we'll get an inconsistent state on disk is much
less with the sorted method.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When we are constructing the vg, we may need to adjust the list of
metadata_areas if there are ignored mdas. At label read time, we
do not read the metadata of ignored mdas, and as a result, they do
not get placed on vg->fid->metadata_areas inside _text_create_text_instance
since lvmcache does not have these areas attached to vginfo->infos.
However, when we're checking the pvids inside _vg_read, after having
read another metadata area from another PV, we do have the opportunity
to update the metadata_area and metadata_areas_ignored lists based
on the read metadata_area. We need accurate mda lists for the reporting
functions that count the ignored mdas, as well as general correctness
of mda balancing.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
With the addition of ignored mdas, we replace all checks for an empty
mda list with a new function to look for either an empty mda list or
ignored mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a helper function to consolidate checking for an empty mdas list
or ignored mdas. Ignored mdas should behave almost identically to
an empty mda list - the metadata areas should not be read or written
to. This function will make it easier to implement metadata balancing
and easier to track pvs with an empty mda list or ignored mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
We implement ignore of an mda at label_read time by checking for
the ignore bit, and then skipping the reading of the vgname and
other information in the metadata. This will have an effect similar
to a PV found with no mdas. Thus, it will look like an orphan in the
cache until we scan the rest of the system and find a PV with
metadata, and the mda will not be on the vg->fid->metadata_areas
list so no read/writes will be done to the metadata area.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch just modifies pvchange to call the underlying ignore
functions for mdas. Ensure special cases do not reflect changes
in metadata (PVs with 0 mdas, setting ignored when already ignored,
clearing ignored when not ignored).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Define a new pvs field, pv_mda_used_count, and a new vgs field,
vg_mda_used_count to match the existing pv_mda_count and vg_mda_count.
These new fields count the number of mdas that have the 'ignored' bit
clear (they are in use on the PV / VG). Also define various supporting
functions to implement the counting as well as setting the ignored
flag and determining if an mda is ignored. These high level functions
call into the lower level location independent mda ignore functions
defined by earlier patches.
Note that counting ignored mdas in a vg requires traversing both lists
and checking for the ignored bit on the mda. The count of 'ignored'
mdas then is defined by having the bit set, not by which list the mda
is on. The list does determine whether LVM actually does read/write to
the mda, though we must count the bits in order to return accurate numbers
for the various counts. Also, pv_mda_set_ignored must search both vg
lists for ignored mda. If the state changes and needs to be committed
to disk, the ignored mda will be on the non-ignored list.
Note also in pv_mda_set_ignored(), we must properly manage the mda lists.
If we change the ignored state of an mda, we must change any mdas on
vg->fid->metadata_areas that correspond to this pv. Also, we may
need to allocate a copy of the mda, as is done when fid->metadata_areas
is populated from _vg_read(), if we are un-ignoring an ignored mda.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a second mda list, metadata_areas_ignored to fid, and a couple
functions, fid_add_mda() and fid_add_mdas() to help manage the lists.
These functions are needed to properly count the ignored mdas and
manage the lists attached to the 'fid' and ultimately the 'vg'.
Ensure metadata_areas_ignored is initialized in other formats, even
if the list is never used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Because of the way mdas are handled internally, where a PV in a VG
has mdas on both info->mdas and vg->fid->metadata_areas list, we
need a location independent copy constructor for struct
metadata_area. Break up the existing format-text specific copy
constructor into a format independent piece and a format dependent
piece.
This function is necessary to properly implement pv_set_mda_ignored().
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
A metadata_area is defined independent of the location. One downside
is that there is no obvious mapping from a pv to an mda. For a PV in
a VG, we need a way to start with a PV and end up with an MDA, if we
are to manage mdas starting with a device/pv. This function provides
us a way to go down the list of PVs on a VG, and identify which ones
match a particular PV.
I'm not entirely happy with this approach, but it does fit into the
existing structures in a reasonable way.
An alternative solution might be to refactor the VG - PV interface such
that mdas are a list tied to a PV. However, this seemed a bit tricky since
a PV does not come into existence until after the list of mdas is
constructed (see _vg_read() - we create a 'fid' and attach mdas to it,
then we go through them and attach pvs).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
We'd like to pass in mda_header to vgname_from_mda(). In order to
do this, we need to call raw_read_mda_header() from text_label.c,
_text_read(), which gets called from the label_read() path, and
peers into the metadata and update vginfo cache. We should check
the disable bit here, and if set, not peer into the vg metadata,
thus reducing the I/O to disk.
In the process, move vgname_from_mda() to layout.h, since the fn
only gets called from format_text code, and we need the mda_header
definition from the private layout.h.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This refactoring moves the device open/close up one level to the caller of
_vg_read_raw_area(). Should be no functional change and facilitate future
changes related to metadata balancing.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
First we add a 'flags' field to the location independent
metadata_area structure, and a MDA_IGNORE flag. The
mda_is_ignored and mda_set_ignored functions are added to
manage the flag. Adding the flag and functions gives a
library interface to ignore metadata areas independent of
the underlying location (disk, file, etc). The location
specific read/write functions must then handle the specifics
of what this flag means to the location.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Adding a flag to the 'rlocn' structure in the mda header of the
text format allows us to flip a bit to ignore an area on disk that
stores the metadata via the text format specific mda_header.
This patch defines the flag and access functions to manage the flag.
Other patches will manage the ignore on a format-independent basis,
by using a flag in the metadata_area structure.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Future patches will make use of a specific flag in the on-disk 'raw_locn'
structure to enable/disable metadata areas, and facilitate metadata
balancing.
Note that 'filler' is always set to '0' (see add_mda() - memset),
so use of this area as a non-zero flags field is a safe way to
provide future code features.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The same region size is used for both mirror volume and mirrored
log volume, but when the physical extent size is bigger than region size,
the size of mirror leg for mirrored log is smaller than the region size
and lvcreate command fails.
This patch adjusts a region size of mirrored log to a smaller value of
region size or physical extent size.
[This patch ensures that the region_size of the mirrored log does not
exceed the size of the mirrored log itself, which would violate the
kernel constraint: (region_size <= ti->len).]
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Preload libc.mo file for localized lvm before taking memory lock - this way
we prevent disk access for some error paths in libdm, that prints localized
errno messages while they are still in memory locked state.
the failure of a device that contained both a image of
a mirror and an image of the mirrored log. The order
of the handling of those faults was important (and
wrong), this patch corrects that.
Patch-From: Takahiro Yasui <tyasui@redhat.com>
We can use DM_UDEV_PRIMARY_SOURCE_FLAG to identify the spurious events
and use it as an indication that the device has already been activated before
(and hence we can find this property in udev database).
WARNING: This change requires udev startup script to preserve udev database
from initrd. All the information stored there during activation of devices
is important for the initial "udevadm trigger --action=add" call that is
used in udev startup script. If not done this way, udev startup script needs
to define DM_UDEV_PRIMARY_SOURCE_FLAG=1 property for any ADD events it uses.
- s/Active clustred VG/clustered VG/ (only LV can be active)
- print only active LVs (not all) in status command
(In the lvdisplay form /dev/vg/lv.)
For now, still use awk (already used in clustered_vgs).
https://bugzilla.redhat.com/show_bug.cgi?id=598495
