IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We need to acquire a lock which can block us which in turn causes
the dbus request handling to block as well. Place the request on
the work queue instead.
Our expectation was that when using the lvm shell that when the lvm prompt
was read from stdout, that all other ouput had been written and flushed.
However, this doesn't appear to be the case. Add extra read passes to
retrieve delayed report data.
In preparation to have more than one thread issuing commands to lvm
at the same time we need to serialize updates to the dbus state and
retrieving the global lvm state. To achieve this we have one thread
handling this with a thread safe queue taking and coalescing requests.
This code is no longer needed because the back ground task has been
removed. Will add back if we change the design and end up utilizing
multiple worker threads.
There is no reason to create another background task when the task that
created it is going to block waiting for it to finish. Instead we will
just execute the logic in the worker thread that is servicing the worker
queue.
Translate log_info() into log_very_verbose() which is macro
supposed to be used by our code.
log_info() is internal macro with eventually some 'symbolic' meaning
in syslogging daemons.
Ensure different logging function for dmeventd.c logging
and dm and lvm library.
We can recognize we want to show every log_info() and
log_notice() message from dmeventd.c code while not
exposing those from libdm/libdevmapper-event
Also switch to use log with errno - it's not changing
anything and doesn't bring any more features yet to dmeventd
logging but we just properly pass dm_errno_or_class properly
through the whole code stack for possible future use
(i.e. support of class logging for dmeventd).
Reword the logging logic and try to restore previous logging
behavior for 'standalone' running daemon while preserving
debuggable feautures it has gained.
So actual rules:
dmeventd without any '-d' option will syslog all messages
from dmeventd.c it dmeventd plugins.
log_notice()==log_verbose()
log_info()==log_very_verbose()
But to show also log_debug() used has to give '-ddd'.
When user specified '-d, -dd, -ddd, -dddd' it
will also enable tracing of messages from libdm & lib
executed code - which is mainly useful for testing
i.e.: 'dmeventd -fldddd'
Introduce macros:
log_level(), log_stderr(), log_once(), log_bypass_report()
For easier and more consisten way how to 'decoder' bits
of info from passed 'level'.
This patch fixes potential problem when 'level' of message
might not have always masked right bits.
Instead of creating a thread to handle the case where a client
is calling job.Wait, we will utilize a timer. This significantly
reduces the number of threads that get created and destroyed while
the service is running.
We will fetch the lvm state in non-main thread and only process the new
data with the main thread to prevent hanging the main thread event loop.
ref. https://bugs.freedesktop.org/show_bug.cgi?id=98521
The following LvCommon properties were added so that the API
would have the same functionality as lvm2app has.
LvCommon.MetaDataSizeBytes
LvCommon.Attr
LvCommon.MetaDataPercent
LvCommon.CopyPercent
LvCommon.SnapPercent
LvCommon.SyncPercent
Integrate back _unblock_sigalrm() and check for error code of
pthread_sigmask() function so we do not use uninitialized
sigmask_t on error path (Coverity).
When a PV device is missing lvm will return '[unknown]' for the device
path. The object manager keeps a hash table lookup for uuid and for PV's
device name. When we had multiple PVs with the same device path we
we only had 1 key in the table for the lvm id (device path). This caused
a problem when the PV device transitioned from '[unknown]' to known as any
subsequent transitions would cause an exception:
Traceback (most recent call last):
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 66, in run_cmd
result = self.method(*self.arguments)
File "/usr/lib/python3.5/site-packages/lvmdbusd/manager.py", line 205, in _pv_scan
cfg.load()
File "/usr/lib/python3.5/site-packages/lvmdbusd/fetch.py", line 24, in load
cache_refresh=False)[1]
File "/usr/lib/python3.5/site-packages/lvmdbusd/pv.py", line 48, in load_pvs
emit_signal, cache_refresh)
File "/usr/lib/python3.5/site-packages/lvmdbusd/loader.py", line 80, in common
cfg.om.remove_object(cfg.om.get_object_by_path(k), True)
File "/usr/lib/python3.5/site-packages/lvmdbusd/objectmanager.py", line 153, in remove_object
self._lookup_remove(path)
File "/usr/lib/python3.5/site-packages/lvmdbusd/objectmanager.py", line 97, in _lookup_remove
del self._id_to_object_path[lvm_id]
KeyError: '[unknown]'
when trying to delete a key that wasn't present. In this case we don't add a
lookup key for the device path and the PV can only be located by UUID.
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1379357
The dm-raid target now rejects device rebuild requests during ongoing
resynchronization thus causing 'lvconvert --repair ...' to fail with
a kernel error message. This regresses with respect to failing automatic
repair via the dmeventd RAID plugin in case raid_fault_policy="allocate"
is configured in lvm.conf as well.
Previously allowing such repair request required cancelling the
resynchronization of any still accessible DataLVs, hence reasoning
potential data loss.
Patch allows the resynchronization of still accessible DataLVs to
finish up by rejecting any 'lvconvert --repair ...'.
It enhances the dmeventd RAID plugin to be able to automatically repair
by postponing the repair after synchronization ended.
More tests are added to lvconvert-rebuild-raid.sh to cover single
and multiple DataLV failure cases for the different RAID levels.
- resolves: rhbz1371717
Gris debugged that when we don't have a method the introspection
data is missing the interface itself eg.
<interface name="<your_obj_iface_name>" />
When adding the properties to the dbus object introspection we will
add the interface too if it's missing. This now allows us the
ability to have a dbus object with only properties.
When we register a failure we need to use a valid value which will be
returned with the object manager. Otherwise we will raise an Exception
because we are trying to construct an object path from None.
The methods were returning an instance of the object instead of the
object path which was causing an exception when the result was returned
with the job object as we are explicity trying to return an object path.
Unit test added which re-creates the issue and verifies the fix.
- Prevent --lvmshell with --nojson, not a valid combination
- If user is preventing json, then no lvmshell usage
- Return boolean on Manager.UseLvmShell
The normal mode of operation will be to monitor for udev events until an
ExternalEvent occurs. In that case the service will disable monitoring
for udev events and use ExternalEvent exclusively.
Note: User specifies --udev the service will always monitor udev regardless
if ExternalEvent is being called too.
With the addition of JSON and the ability to get output which is known to
not contain any extraneous text we can now leverage lvm shell, so that we
don't fork and exec lvm command line repeatedly.
When we are running in a terminal it's useful to have a date & ts on log
output like you get when output goes to the journal. Check if we are
running on a tty and if we are, add it in.
When converting to a cache lv, tests were hanging with a prompt for
"Do you want wipe existing metadata of cache pool volume
To preserve cache metadata add option "--zero n".
WARNING: Reusing mismatched cache pool metadata MAY DESTROY YOUR DATA!"
This is new.
When a client is doing a wait on a job, any other clients will hang
when trying to do anything with the service. This is caused by
the wait code which was placing the thread that handles
incoming dbus requests to sleep until either the timeout expired or
the job operation completed.
This change creates a thread for the wait request, so that the thread
processing incoming requests can continue to run.
If the VG holding the global lock is removed, we can indicate
that as the reason for not being able to acquire the global
lock in subsequent error messages, and can suggest enabling
the global lock in another VG. (This helpful error message
will go away if the global lock is enabled in another VG,
or if lvmlockd is restarted.)
Run umount code only when either thin data or metadata are
above 95% - so if there are resize failures with 60%.
system fill keep running.
Also umount will only be tried with lvm2 LVs.
Foreign users are ATM unsuppored.
We call 'lvm help' to find out if fullreport is supported. Lvm
dumps help to stderr. Common code prints a warning if we exit
with 0, but have something in stderr so we are skipping the warning
message.
The following operations would hang if lvm was compiled with
'enable-notify-dbus' and the client specified -1 for the timeout:
* LV snapshot merge
* VG move
* LV move
This was caused because the implementation of these three dbus methods is
different. Most of the dbus method calls are executed by gathering information
needed to fulfill it, placing that information on a thread safe queue and
returning. The results later to be returned to the client with callbacks.
With this approach we can process an arbitrary number of commands without any
of them blocking other dbus commands. However, the 3 dbus methods listed
above did not utilize this functionality because they were implemented with a
separate thread that handles the fork & exec of lvm. This is done because these
operations can be very slow to complete. However, because of this the lvm
command that we were waiting on is trying to call back into the dbus service to
notify it that something changed. Because the code was blocking the process
that handles the incoming dbus activity the lvm command blocked. We were stuck
until the client timed-out the connection, which then causes the service to
unblock and continue. If the client did not have a timeout, we would have been
hung indefinitely.
The fix is to always utilize the worker queue on all dbus methods. We need to
ensure that lvm is tested with 'enable-notify-dbus' enabled and disabled.
Previously, a command sent lvmetad new VG metadata in vg_commit().
In vg_commit(), devices are suspended, so any memory allocation
done by the command while sending to lvmetad, or by lvmetad while
updating its cache could deadlock if memory reclaim was triggered.
Now lvmetad is updated in unlock_vg(), after devices are resumed.
The new method for updating VG metadata in lvmetad is in two phases:
1. In vg_write(), before devices are suspended, the command sends
lvmetad a short message ("set_vg_info") telling it what the new
VG seqno will be. lvmetad sees that the seqno is newer than
the seqno of its cached VG, so it sets the INVALID flag for the
cached VG. If sending the message to lvmetad fails, the command
fails before the metadata is committed and the change is not made.
If sending the message succeeds, vg_commit() is called.
2. In unlock_vg(), after devices are resumed, the command sends
lvmetad the standard vg_update message with the new metadata.
lvmetad sees that the seqno in the new metadata matches the
seqno it saved from set_vg_info, and knows it has the latest
copy, so it clears the INVALID flag for the cached VG.
If a command fails between 1 and 2 (after committing the VG on disk,
but before sending lvmetad the new metadata), the cached VG retains
the INVALID flag in lvmetad. A subsequent command will read the
cached VG from lvmetad, see the INVALID flag, ignore the cached
copy, read the VG from disk instead, update the lvmetad copy
with the latest copy from disk, (this clears the INVALID flag
in lvmetad), and use the correct VG metadata for the command.
(This INVALID mechanism already existed for use by lvmlockd.)
Reconnect to lvmetad if either the send fails (e.g. lvmetad
was restarted since lvmlockd last connected), or if no
lvmetad connection exists (e.g. lvmetad was started after
lvmlockd so no previous connection existed.)
Previously, vgcfgrestore would attempt to vg_remove the
existing VG from lvmetad and then vg_update to add the
restored VG. But, if there was a failure in the command
or with vg_update, the lvmetad cache would be left incorrect.
Now, disable lvmetad before the restore begins, and then
rescan to populate lvmetad from disk after restore has
written the new VG to disk.
We were initially looking to see if an LV was hidden and if it was we were
creating an instance of a LvCommon object to represent it. Thus if we
had a hidden cache pool for example we were missing the methods and
properties for the cache pool. However, when we create the object path,
any hidden LVs, regardless of type/functionality will be placed in the
hidden path.
The object manager method get_object_by_lvm_id was used in many cases for
the sole reason of getting the object path for the object. Instead of
retrieving the object and then calling 'dbus_object_path' on the object, we
are adding a method which returns the object path.
When we are processing the LVs we need to build up dbus objects from least
dependent to most dependent, so that we have information available when
constructing.
If a command gets stuck during an lvmetad update, lvmetad
will cancel that update after the timeout. The next command
to check the lvmetad will see that lvmetad needs to be
populated because lvmetad will return token of "none" after
a timed out update (same as when lvmetad is not populated
at all after starting.)
If a command gets an error during an lvmetad update, it
will now just quit and leave its updating token in place.
That update will be cancelled after the timeout.
All the variables for sscanf in lvmlockctl.c and lvmlockd-sanlock.c are
zeroed before sscanf call so the failure is detected by seeing the zero
value instead of proper one in subsequent code - so use (void) for
sscanf calls to ignore return value here.
If a command begins repopulating the lvmetad cache,
and fails part way through, it should set the disabled
state in lvmetad so other commands don't use bad data.
If a subsequent scan succeeds, the disabled state is
cleared.
When duplicate PVs are detected, set the disabled
flag so that commands will disable use of lvmetad.
This duplicate detection is done by lvmetad itself
when it's told about a single new PV with a PVID
that matches an existing PV on another device.
(This is different from the case where the command
is scanning all devices and detects the duplicate.)
Remove the "altdev" logic that attempted to keep
track of multiple devices for a single PV. It
is no longer used since lvmetad is disabled in
this case.
A global flag in lvmetad indicates it has been disabled.
Other flags indicate the reason it was disabled.
These flags can be queried using get_global_info.
The lvmetactl debugging utility can set and clear the
disabled flag in lvmetad. Nothing else sets the
disabled flag yet.
Commands will check these flags after connecting to
lvmetad. If the disabled flag is set, the command
will not use the lvmetad cache, but revert to disk
scanning.
To test this feature:
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 0
disable_reason = "none"
token = "filter:3041577944"
$ vgs
(should report VGs from lvmetad)
$ lvmetactl set_global_disable 1
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 1
disable_reason = "DIRECT"
token = "filter:3041577944"
$ vgs
WARNING: Not using lvmetad because the disable flag was set directly.
(should report VGs without contacting lvmetad)
$ lvmetactl set_global_disable 0
$ vgs
(should report VGs from lvmetad)
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
To help out with debug, when an exception is thrown in the dbus service we
will dump all the information we have on the last 16 commands that were
executed along with the stack strace.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
While running on F24 a number of warnings were being emitted from using the
deprecated GObject instead of GLib. Tested on python 3.4 and 3.5.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Python 3.5 in F24 was throwing the following exception:
Traceback (most recent call last):
File "/usr/lib/python3.5/site-packages/lvmdbusd/main.py", line 73, in process_request
req.run_cmd()
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 73, in run_cmd
self.register_error(-1, st)
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 123, in register_error
self._reg_ending(None, error_rc, error)
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 115, in _reg_ending
self.cb_error(self._rc_error)
File "/usr/lib64/python3.5/site-packages/dbus/service.py", line 669, in <lambda>
keywords[error_callback] = lambda exception: _method_reply_error(connection, message, exception)
File "/usr/lib64/python3.5/site-packages/dbus/service.py", line 293, in _method_reply_error
exception))
File "/usr/lib64/python3.5/traceback.py", line 136, in format_exception_only
return list(TracebackException(etype, value, None).format_exception_only())
File "/usr/lib64/python3.5/traceback.py", line 442, in __init__
if (exc_value and exc_value.__cause__ is not None
AttributeError: 'str' object has no attribute '__cause__'
This was caused because we were calling the dbus error callback with a
string instead of an actual exception. On python 3.4 this was apparently
OK, but not with 3.5. Corrected to pass the exception to error callback.
Change tested on both python 3.4 and 3.5.
Reported-by: Vratislav Podzimek <vpodzime@redhat.com>
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When we use udev or have lvm call back into the dbus service when a
change occurs, even if that change originated from the dbus service
we end up refreshing the state of the system twice which is not
needed or wanted. This change handles this case by removing any
pending refreshes in the worker queue if the state of the system
was just updated.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Use #define instead, since we do not require actually buffer needs
to exists to eliminated new gcc6 warning:
clvm.h:53:19: warning: ‘CLVMD_SOCKNAME’ defined but not used
[-Wunused-const-variable]
export LVMDBUSD_SESSION=True to run on the session bus instead
of the system bus so that we can run the unit test without
installing the dbus conf file.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
It appears that the output of lvconvert --merge can vary some. The code
was blowing up as it was trying to parse a line of stdout to retrieve the
% complete, but the line did not have the needed format and an execption
was thrown. The uncaught exception caused the background thread to exit
without updating the job object, which caused the client to hang forever
waiting. Added a default exception handler to prevent unhandled execptions
causing hangs and removed the parameter skip_first_line as it's no longer
needed. The code checks to see if the line can be parsed before doing so.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
After the lockspace has been successfully removed,
invalidate the name field in the lockspace struct.
The struct remains on the list of lockspaces until
the struct can be freed later. Until the struct is
freed, its name will prevent another new lockspace
from being created with the same name.
Since commit 2fc126b00d, the library
code requires udev to be initialised for device scanning and
clvmd can fail to find VGs if devices/external_device_info_source
is set to "udev".
Make the lvb validation rules for convert match
those for unlock (even though it would be very
unlikely or impossible for convert to deal with
zero lvb.)
Have commands send lvmlockd the update message
in vg_write instead of vg_commit, so that it's
not done while LVs are suspended. If the vg_write
is not committed, and the seqno sent to lvmlockd
is not used, then lvmlockd can detect this when
the next update uses the same seqno.
Use process_each_vg() to lock and read the old VG,
and then call the main vgrename code.
When real VG names are used (not a UUID in place of the
old name), the command still pre-locks the new name
(when strcmp wants it locked first), before calling
process_each_vg on the old name.
In the case where the old name is replaced with a UUID,
process_each_vg now translates that UUID into the real
VG name, which it locks and reads. In this case, we
cannot do pre-locking to maintain lock ordering because
the old name is unknown. So, in this case the strcmp
based lock ordering is suppressed and the old name is
always locked first. This opens a remote chance for
lock ordering conflict between racing vgrenames between
two names where one or both commands use the UUID.
If an existing fifo has the wrong attributes it cannot be trusted
so we must unlink it and recreate it correctly.
(Replaces 2c8d6f5c90: if the other end of
the fifo already got opened while its mode was insecure, delaying the
chmod isn't going to make any difference!)
Reinstate and extend checks removed by e1b111b02a.
The code has always assumed that only root has access to the directory
containing the fifos and that they are under the complete control of
dmeventd code. If anything is found not to be as expected, then open()
should certainly not be attempted!
In lookup, return a count of entries with the
same key rather than the value from a second
entry with the same key.
Using some slightly different names.
Simply use lookup_withval right away rather than doing a
standard lookup, checking for the wrong mapping, then
repeating with lookup_withval to get the right mapping.
If the data len is passed into the hash table
and saved there, then the hash table internals
do not need to assume that the data value is
a string at any point.
New hash table functions are added that allow for
multiple entries with the same key. Use of the
vgname_to_vgid hash table is converted to these
new functions since there are multiple entries
in vgname_to_vgid that have the same key (vgname).
When multiple VGs with the same name exist, commands
that reference only a VG name will fail saying the
VG could not be found (that error message could be
improved.) Any command that works with the select
option can access one of the VGs with -S vg_uuid=X.
vgrename is a special case that allows the first VG
name arg to be replaced by a uuid, which also works.
(The existing hash table implementation is not well
suited for handling this case, but it works ok with
the new extensions. Changing lvmetad to use its own
custom hash tables may be preferable at some point.)
Recent change 2c8d6f5c90
actually droped restart when the reason of failing open is missing
device completely - check for ENOENT now as another reason
to start new dmeventd server (when there is no systemd to maintain it).
While through all codepaths we never 'read' lock_id unless LCKF_CONVERT,
coverity cannot decrypt this.
As since it's usually better to pass in 'well-defined' data structures
preset lock_id to 0.
Use fputs() when printing plain string,
easier then fprintf which needs to parse it.
Also check fd before close is >= 0 -
it is - but coverity fail to see it, so eliminate
this false-positive warning.
Check for arg_vgid_lookup and arg_name_lookup not being NULL.
Drop checking arg_vgid and arg_name for NULL since they
are already dereference earlier - thus mostly must be NOT NULL.
(If that would be possible larger rework of this function would be
required).
Put calls related to fifo opening into a single function.
Fix Time-Of-Check-Time-Of-Use and use fstat()
and fchmod() on already opened fd instead of
checking first path and then risking to open something
different.
update_metadata and pv_found update the cached metadata;
these are both reworked to improve the code, organize it
by each possible state and transition, make it much more
clear what's changing, add more error checking and
handling, and add comments.
The state and content of the cache (hash tables) does not
change (apart from some things that didn't work before),
and the communication to/from commands does not change.
The implementation and organization of the code making
the state changes does change significantly.
One detail related to the content of the cache does change:
different hash tables do not reference the same memory any more;
the target values in each hash table are allocated and freed
individually.
If plugin's lvm command execution fails too often (>10 times),
there is no point to torture system more then necessary, just log
and drop monitoring in this case.
Improve event string parser to avoid unneeded alloc+free.
Daemon talk function uses '-' to mark NULL/missing field.
So restore the NULL pointer back on parser.
This should have made old tools like 'dmevent_tool' work again.
As now 'uuid' or 'dso' could become NULL and then be
properly used in _want_registered_device() function.
Since lvm2 always fill these parameters, this change should
have no effect on lvm2.
Older pthread library was missing 'trick'
in pthread_cleanup_pop() which lead to
compilation error:
error: label at end of compound statement
Use explicit ';' to fix it.
Implementing exit when 'dmeventd' is idle.
Default idle timeout set to 1 hour - after this time period
dmeventd will cleanly exit.
On systems with 'systemd' - service is automatically started with
next contact on dmeventd communication socket/fifo.
On other systems - new dmeventd starts again when lvm2 command detects
its missing and monitoring is needed.
Add support to unmonitor device when monitor recognizes there is
nothing to monitor anymore.
TODO: possibly API change with return value could be also used.
Redesign threading code:
- plugin registration runs within its new created thread for
improved parallel usage.
- wait task is created just once and used during whole plugin lifetime.
- event thread is based over 'events' filter being set - when
filter is 0, such thread is 'unused'.
- event loop is simplified.
- timeout thread is never signaling 'processing' thread.
- pending of events filter cnange is properly reported and
running event thread is signalled when possible.
- helgrind is not reporting problems.
Need here to keep control device opened while there is 'any' dso
plugin loaded - otherwise there would a race closing controlfd
inside lvm2 plugin while some other monitoring thread would
tried to execute another WAITEVENT task.
Move all DSO related function in front, so they could be easily
referenced from rest of code.
Add proper error paths with logging and error reporting.
Drop mutex locking when releasing DSO - since DSO is always
allocated and released in main 'event' processing thread.
If a host failed while holding a sanlock lease,
sanlock_acquire will by default block and wait
for the lease to expire before returning. We
want it to return with an error so we can retry
instead of blocking, which allows us to process
other lock operations.
(Enclose this in an ifdef until the new flag
appears in a sanlock release.)
Respect lvm2_log_fn prototype. The idea of 'reusing' print_log with
plain cast is causing very strange crashes with some older 'gcc' compilers.
So just do it cleanly...
Rework thread creation code to better use resources.
New code will not leak 'timeout' registered thread on error path.
Also if the thread already exist - avoid creation of thread
object and it's later destruction.
If the race is noticed during adding new monitoring thread,
such thread is put on cleanup list and -EEXIST is reported.
As we now use 'unified' logging macro system - we no longer need
to protect from change of logging function pointer - it's set
once at the start of dmeventd and not change anymore
(as lvm2 library no longer interferers here).
If lvmlockd acquires an lv lock for a command, but the
command exits before the reply, then the command has
not activated the lv and lvmlockd should unlock it.
This only applies when the lv was not already locked.
(There will always be a chance that the lv lock is held
while the lv is not active, i.e. if the command fails in
the small window between getting the lv lock and before
doing the activation. In that case, rerunning the
activation command corrects the inconsistency.)
This commit helps by automatically clearing the
inconsistency (lv locked by not activated) in the most
common case when the lv lock operation is slow to
complete and the command is canceled by the user.
This commit also adds and cleans up references to the
client id in a bunch of log messages, which is useful
to follow processing on each independent lock request.
This applies the same rule/logic to dlm VGs that has always
existed for sanlock VGs. Allowing a dlm VG to be removed
while its lockspace was still running on other hosts largely
worked, but there were difficult problems if another VG with
the same name was recreated. Forcing the VG lockspace to
be stopped, gives both sanlock and dlm VGs the same behavior.
This shortcut was added for an odd case that I do not
believe is relevant any more. Having an alternate
path for lockspace thread cleanup is a complication
that could lead to problems.
