IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When we insert layer we also move status flag-bits for certain LV types,
so internal volume_group structure remains consistent.
(Perhaps it's misuse of 'insert_layer' function and we should have
another similar function for this.)
Basically we aim to maintain the same state as after reading fresh
metadata out of volume group.
Currently we when i.e. cache 'raid' LV - this should transfer 'raidLV' flag
to _corigin LV and cache is no longer a raid.
TODO: bits for stacked devices needs more exact rules.
The dlm will often lose the lvb content, so we need to
check quite a few possibilities for lvb values that
were not being checked before.
Refactoring was required to pass the entire lvb value
back to the core code instead of the single value.
The only functional change should be detecting new
lvb states where metadata is now invalidated where
it wasn't before.
When an action is created by lvmlockd for itself,
there is no client to send the result to. Add
the NO_CLIENT flag to the action to skip sending
the result to a client.
Add a new arg to lockd_start_vg() that indicates
it is being called for a new lockd VG, so that
lvmlockd knows the lockspace being started is new.
(Will be used by a following commit.)
Commit f6473baffc introduced a new
cmd->initialized variable to keep info about which parts of the
cmd_context have been initialized.
A part of this patch was also a change in refresh_filters fn
which checks for cmd->initialized.filters variable and it does
the filter refresh *only* if the filter has already been initialized
before otherwise it's a NOOP (before, the refresh_filters also
initialized filters as a side effect in case it had not been
initialized before which was not quite correct).
However, the commit f6473baffc
did not handle the case in which configuration changes
either via --config argument or when configuration file changed
and its timestamp was higher than the timestamp of the persistent
cache file - the /etc/lvm/cache/.cache.
This patch fixes this issue and it causes the init_filters fn
in lvm_run_command fn to be called with proper value of
"load_persistent_cache" switch even if the configuration changes,
hence causing the persistent cache file to be ignored in this
case.
Ensure make clean cleans any left-over file from their previous
location so they are not in conflict with new ones.
Also hide error message when .commands file is not present.
The regex filter (controlled by devices/filter lvm.conf setting) was
evaluated as the very last filter. However, this is not optimal when
it comes to restricting disk access - users define devices/filter
as well as devices/global_filter to avoid this.
The devices/global_filter is already positioned at the beginning of the
filter chain. We need to do the same for devices/filter.
Filter chains before this patch:
A: when lvmetad is not used:
persistent_filter -> sysfs_filter -> global_regex_filter ->
type_filter -> usable->filter -> mpath_component_filter ->
partition_filter -> md_component_filter -> fw_raid_filter ->
regex_filter
B: when lvmetad is used:
B1: to update lvmetad:
sysfs_filter -> global_regex_filter -> type_filter ->
usable_filter -> mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B2: to retrieve info from lvmetad:
persistent_filter -> usable_filter -> regex_filter
From the chain list above we can see that particularly in case when
lvmetad is not used, the regex filter is the very last one that is
processed. If lvmetad is used, it doesn't matter much as there's
the global_regex_filter which is used instead when updating lvmetad
and when retrieving info from lvmetad, putting regex_filter in front
of usable_filter wouldn't change much since usabled_filter is not
reading disks directly.
This patch puts the regex filter to the front even in case lvmetad
is not used, hence reinstating the state as it was before commit
a7be3b12df (which moved the regex_filter
position in the chain). Still, the arguments for the commit
a7be3b12df still apply and they're
still satisfied since component filters (MD, mpath...) are evaluated
first just before updating lvmetad.
So with this patch, we end up with:
A: when lvmetad is not used:
persistent_filter -> sysfs_filter -> global_regex_filter ->
regex_filter -> type_filter -> usable->filter ->
mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B: when lvmetad is used:
B1: to update lvmetad:
sysfs_filter -> global_regex_filter -> type_filter ->
usable_filter -> mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B2: to retrieve info from lvmetad:
persistent_filter -> regex_filter -> usable_filter
This way, specifying the regex_filter in non-lvmetad case causes
the devices to be filtered based on regex first before processing
any other filters which can access disks (like md_component_filter).
This patch also streamlines the code for better readability.
Hopefull 4.3 will be fixed and test will be updated to let
raid test running again.
Meanwhile using md-raid may effectively kill kernel,
so leave at least other tests running.
Split up _build_histogram_arg() into separate functions to allocate
and fill the histogram arg string and remove nested local variable
declarations from the parent function.
Coverity flags a user-after-free in _stats_histograms_destroy():
>>> Calling "dm_pool_free" frees pointer "mem->chunk" which has
>>> already been freed.
This should not be possible since the histograms are destroyed in
reverse order of allocation:
203 for (n = _nr_areas_region(region) - 1; n; n--)
204 if (region->counters[n].histogram)
205 dm_pool_free(mem, region->counters[n].histogram);
It appears that Coverity is unaware that pool->chunk is updated
during the call to dm_pool_free() and valgrind flags no errors in
this function when called with multiple allocated histograms.
Since there is no actual need to free the histograms individually
in this way simplify the code and just free the first allocated
object (which will also free all later allocated histograms in a
single call).
Put include/.symlinks_created as a prerequisite for dep calc.
Otherwise if these are not generated and user enters tests subdir and
runs 'make' he just gets endless loop of dep calculation.
Relocate generated configure.h and lvm-version.h outside
of compilable .c source tree.
The reason is behind - when compiling in builddir != srcdir
the generated file in lib/misc/configure.h was used for all compiled
source file except ones located in lib/misc dir - those would have used
configure.h file located in this dir - if there have existed one (i.e.
from some other build)
This problem was only visible, when srcdir == buildir was used before
trying to use srcdri != builddir (as configure.h appeared then in
srcdir).
The histogram changes adds a new error path to dm_stats_create().
Make sure that the dm_stats handle is properly destroyed if we fail
to create the histogram pool and check for failures setting the
program_id.
Since we are growing an object in the histogram pool the return
value of dm_pool_grow_object() must be checked and error paths need
to abandon the object before returning.
Undo the part of the recent EREMOVED change which
automatically stopped the lockspace for a remotely
removed VG. It didn't always work (would not work
when lvb content was rebuilt in the dlm). This will
be handled better when the lvb content is controlled
more strictly.
As part of fix that came with cf700151eb,
I forgot to add the check whether the result of stat was successful or
not. This bug caused uninitialized buffer to be used for entries
from .cache file which are no longer valid.
This bug may have caused these uninitialized values to be used further,
for example (see the unreal (2567,590944) representing major:minor
pair):
$ pvs
/dev/abc: stat failed: No such file or directory
Path /dev/abc no longer valid for device(2567,590944)
PV VG Fmt Attr PSize PFree
/dev/mapper/test lvm2 --- 104.00m 104.00m
/dev/vda2 rhel lvm2 a-- 9.51g 0
Older versions of gcc aren't able to track the assignments of
local variables as well as the latest versions leading to spurious
warnings like:
libdm-stats.c:2183: warning: "len" may be used uninitialized in this
function
libdm-stats.c:2177: warning: "minwidth" may be used uninitialized in
this function
Both of these variables are in fact assigned in all possible paths
through the function and later compilers do not produce these
warnings.
There's no reason to not initialize these variables though and
it makes the function slightly easier to follow.
Also fix one use of 'unsigned' for a nr_bins value.
Replace the histogram stats subcommand with a --histogram switch
to enable histogram related fields for both list and report output.
To avoid overloading the existing --histogram rename it to --bounds:
this is also a better description of the option.
Remove the optimization/shortcut for starting the dlm global
lockspace when it was already running.
Reenable automatically starting the dlm global lockspace
when a command attempts to use it and it's not yet started.
This had become disabled at some point.
