IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With newer kernels (>5.13) DM_CREATE no longer generates
uevent for DM devices without table.
There are even no sysfs block device entries in such case,
although device has asigned major:minor and it is being listed
by 'dmsetup info'.
So this patch calculates amount of 'table' lines and in case
no table line comes from cmdline or stdin - waiting on cookie
is avoided generically instead of disabling just case with
option --notable - which then also skipped handling of an
option --addnodeoncreate (which is however historical and
should be avoided)
As a result there should be no leaking udev cookies and endlessly
waiting commands like this:
dmsetup create mytestdev </dev/null
We can't assume that strerror_r returns char* just because _GNU_SOURCE is
defined. We already call the appropriate autoconf test, so let's use its
result (STRERROR_R_CHAR_P).
Note that in configure, _GNU_SOURCE is always set, but we add a defined
guard just in case for futureproofing.
Bug: https://bugs.gentoo.org/869404
Query LV lock state in lvmlockd to report lv_active_exclusively
for active LVs in a shared VGs. As with all lvmlockd state,
it is from the perspective of the local node.
Signed-off-by: corubba <corubba@gmx.de>
Add a note to the manpage that lvmlockd is unable to determine
accurately and without side-effects whether a LV is remotely active.
Also change the value of the lv_active_remotely option from false to
undefined for shared VGs to distinctly communicate that inability to
users. Only for local VGs it can be definitely stated that they are not
remotely active.
Signed-off-by: corubba <corubba@gmx.de>
Since now we change deduplication with V4 table line change,
the modification tends to be faster and we can capture for a few ms
also 'status' about opening or closing deduplication index.
Use 'grep -E' to handle both words.
Improve detection of VDO virtual size - so it's not reading VDO
metadata when VDO device is already active and instead we reuse
existing table line for knowing existing metadata size.
NOTE: if there is ever going to be added support for reduction
of VDO virtual size - this method will need to be reworked to
allow size difference only within 'extent_size' alignment.
As we actully use reading of VDO metadata only as extra 'information' source,
and not error command - switch to 'log_debug()' severity with messages
out of parser code.
Handle multiple devices using the same serial number as
their device id. After matching devices to devices file
entries, if there is a discrepency between the ondisk PVID
and the devices file PVID, then rematch devices to
devices file entries using PVID, looking at all disks
on the system with the same serial number.
Only /sys/dev/block/major:minor/device/serial was read to find
a disk serial number, but a serial number seems to be reported
more often in other locations, so check these also:
/sys/dev/block/major:minor/device/vpd_pg80
/sys/class/block/vda/serial (for virtio disks only)
Add very simplistic parser of vdo metadata to be able to obtain
logical_blocks stored within vdo metadata - as lvm2 may
submit smaller value due to internal aligment rules.
To avoid creation of mismatching table line - use this number
instead the one provided by lvm2.
Previously we utilized udev until we got a dbus notification from lvm
command line tools. This however misses the case where something outside
of lvm clears the signatures on a block device and we fail to refresh the
state of the daemon. Change the behavior so we always monitor udev events,
but ignore those udev events that pertain to lvm members.
Note: --udev command line option no longer does anything and simply
outputs a message that it's no longer used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1967171
The lvm dbus daemon will auto activate on dbus API calls. To
prevent the dbus daemon starting when lvm command line tools are
being used we will check to see if the daemon is running first.
If the daemon is not running, we will not notify the daemon.
For this check to work it requires the changes done previously
with commit: 3fdf449348
Reviewed-by: David Teigland <teigland@redhat.com>
The number of extents for the sanlock lvmlock lv is calculated using
integer division, which rounds towards zero. With a physical extent size
of 129M, instead of the requested 256M the lv is only 129M (1 extent).
With any physical extent size greater than 256M the lv creation fails
because the number of extents is zero.
This is fixed by replacing the integer division with a division macro
that rounds up and thus guarantees that the size of the lv will always
be equal or greater than the requested size. Using the examples above, a
pes of 129M will result in a 258M lv (2 extents), pes of 300M in a 300M
lv (1 extent).
The re-calculation of the lv size in bytes and megabytes is only so the
debug output shows the correct values. The size in mb there is still
not byte-perfect-accurate, but good enough for a human-readable estimate;
and the exact size in bytes and extents is right next to it.
Signed-off-by: corubba <corubba@gmx.de>
When executing process_each_lv_in_vg, we process live LVs first and
after that, we process any historical LVs. In case we have just removed
an LV, which also means we have just made it "historical" and so it
appears as fresh item in vg->historical_lvs list, we have to skip it
when we get to processing historical LVs inside the same process_each_lv_in_vg
call.
The simplest approach here, without introducing another LV list, is to
simply mark such historical LVs as "fresh" directly in struct
historical_logical_volume when we have just removed the original LV
and created the historical LV for it. Then, we just need to check the
flag when processing historical LVs and skip it if it is "fresh".
When we read historical LVs out of metadata, they are marked as
"not fresh" and so they can be processed as usual.
This was mainly an issue in conjuction with -S|--select use:
# lvmconfig --type diff
metadata {
record_lvs_history=1
}
(In this example, a thin pool with lvol1 thin LV and lvol2 and lvol3 snapshots.)
# lvs -H vg -o name,pool_lv,full_ancestors,full_descendants
LV Pool FAncestors FDescendants
lvol1 pool lvol2,lvol3
lvol2 pool lvol1 lvol3
lvol3 pool lvol2,lvol1
pool
# lvremove -S 'name=lvol2'
Logical volume "lvol2" successfully removed.
Historical logical volume "lvol2" successfully removed.
...here, the historical LV lvol2 should not have been removed because
we have just removed its original non-historical lvol2 and the fresh
historical lvol2 must not be included in the same processing spree.
The new device_id types are: wwid_naa, wwid_eui, wwid_t10.
The new types use the specific wwid type in their name.
lvm currently gets the values for these types by reading
the device's vpd_pg83 sysfs file (this could change in the
future if better methods become available for reading the
values.)
If a device is added to the devices file using one of these
types, prior versions of lvm will not recognize the types
and will be unable to use the devices.
When adding a new device, lvm continues to first use sys_wwid
from the sysfs wwid file. If the device has no sysfs wwid file,
lvm now attempts to use one of the new types from vpd_pg83.
If a devices file entry with type sys_wwid does not match a
given device's sysfs wwid file, the sys_wwid value will also
be compared to that device's other wwids from its vpd_pg83 file.
If the kernel changes the wwid type reported from the sysfs
wwid file, e.g. from a device's t10 id to its naa id, then lvm
should still be able to match it correctly using the vpd_pg83
data which will include both ids.
t10 wwids are now edited in the same way that multipath does,
which is replacing a series of spaces with one _. Previously
lvm replaced every space with one _. Devices file entries
with the old form will be converted to the new shorter form.
Move the functions handling dev wwids.
Add dev flags indicating that wwids have been read from
sysfs wwid file or sysfs vpd_pg83 file. This can be
used to avoid rereading these.
Improve filter-mpath search for a device's wwid in
/etc/multipath/wwids, to avoid unnecessary rereading
of wwids from sysfs files.
Type 8 wwids from vpd_pg83 with naa or eui names should be
saved as those types.
