IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If pvmove crashed and metadata contains pvmove LV
but without miorrored segments, pvmove --abort
will not repair the situation (and finish wth success!).
Fix it by allowing metadata update if aborting
(thus removing pvmove LV) even if no moved LVs detected.
(Tested on real metadata provided by an lvm user:-)
detected alignment.
NOTE: lvm2 doesn't detect MD 1.2 metadata (now the default on RHEL6) so
for now I'm forcing 1.0 metadata. This was needed to be able to reuse
the existing loop devices but recreate the md device with different
raid0 striping.
Add "devices/default_data_alignment" to lvm.conf to control the internal
default that LVM2 uses: 0==64k, 1==1MB, 2==2MB, etc.
If --dataalignment (or lvm.conf's "devices/data_alignment") is specified
then it is always used to align the start of the data area. This means
the md_chunk_alignment and data_alignment_detection are disabled if set.
(Same now applies to pvcreate --dataalignmentoffset, the specified value
will be used instead of the result from data_alignment_offset_detection)
set_pe_align() still looks to use the determined default alignment
(based on lvm.conf's default_data_alignment) if the default is a
multiple of the MD or topology detected values.
Add 'get' functions based on the simple macro function definition for a
numeric property.
Add 'get' functions for the following: _vg_extent_count_get,
_vg_free_count_get, _max_lv_get, _max_pv_get, _pv_count_get,
_lv_count_get, _snap_count_get, _vg_seqno_get, _vg_size_get,
_vg_free_get, vg_mda_*.
For size functions, multiply by SECTOR_SIZE to return the value in bytes.
Extend the existing reporting infrastructure definitions and structures
to include a 'get' and 'set' function for each field. We will provide
a 'get' and 'set' function for each of these fields, which will be utilized
by exported lvm2app functions.
Define a default _not_implemented 'get' and 'set' function that just sets
an errno and returns 0. Future patches will actually implement the
specific 'get' and 'set' functions for each property. For read-only
properties, only the 'get' function will be implemented.
Define vg_get_property() function to query a property. We will call
this from a lvm2app function.
Rather than hard code the size of the field, use a #define, so we can re-use.
The #define will be needed in a future patch when we extend the reporting
infrastructure to have 'get' and 'set' functions for each field, allowing
lvm2app functions which query any report field. In order to provide a
generic lookup based on the field id, we will define a type containing this
field id, and thus, we will need to re-use the length of this string as
it's defined inside libdevmapper.h.
The 'id' entries in columns.h are the report field names. Since these are
unique, we'd like to use them in generation of 'get' / 'set' functions.
As a step towards using them for this purpose, remove the explicit double
quotes and use the macro '#' character to add the double quotes back when
placing them into the '_fields' array 'id' member.
Add a 'flags' field to columns.h, and set it to 0 by default.
Define FIELD_MODIFIABLE flag to indicate whether a 'set' function exists
to change the field's value.
In all top vg read functions only LCK_VG_READ/WRITE can be used.
All other vg lock definitions are low-level backend machinery.
Moreover, LCK_WRITE cannot be tested through bitmask.
This patch fixes these mistakes.
For _recover_vg() we do not need lock_flags, it can be only
two of above and we always upgrading to LCK_VG_WRITE lock there.
(N.B. that code is racy)
There is no functional change in code (despite wrong masking
it produces correct bits:-)
One shiny day we should use libblkid here. But now using LUKS is
very common together with LVM and pvcreate destroys LUKS completely.
So for user's convenience, try to detect LUKS signature and allow abort.
This is not only undocumented but is is also in violation with --help
documentation.
Using --yes without --force is useful in pvcreate when it detects
old signature.
pvcreate detects MD and swap signature.
The logic hidden there is not only documented but it is also
user unfriendly. Who invented this logic should run pvcreate
on its own critical MD device to see why;-)
This patch
- creates one function instead of duplication code
- asks if user want to overwrite signature
- allows aborting (!)
(Please note that writing LVM signatute without wiping old
is wrong, it confuses blkid, MD will not work anyway and
swap and LUKS is broken too.)
We can't rely on the fact that udev should prepare the node with right major
and minor number to trigger the module autoloading. We have to take into
account that the node could be missing or it could exist with improper
major and minor number assigned (e.g. from previous kernel versions in
an environment with static nodes and without udev). Make any corrections
if needed!
The lvm repair issues I believe are the superficial symptoms of this
bug - there are worse issues that are not as clearly seen. From my
inline comments:
* If the mirror was successfully recovered, we want to always
* force every machine to write to all devices - otherwise,
* corruption will occur. Here's how:
* Node1 suffers a failure and marks a region out-of-sync
* Node2 attempts a write, gets by is_remote_recovering,
* and queries the sync status of the region - finding
* it out-of-sync.
* Node2 thinks the write should be a nosync write, but it
* hasn't suffered the drive failure that Node1 has yet.
* It then issues a generic_make_request directly to
* the primary image only - which is exactly the device
* that has suffered the failure.
* Node2 suffers a lost write - which completely bypasses the
* mirror layer because it had gone through generic_m_r.
* The file system will likely explode at this point due to
* I/O errors. If it wasn't the primary that failed, it is
* easily possible in this case to issue writes to just one
* of the remaining images - also leaving the mirror inconsistent.
*
* We let in_sync() return 1 in a cluster regardless of what is
* in the bitmap once recovery has successfully completed on a
* mirror. This ensures the mirroring code will continue to
* attempt to write to all mirror images. The worst that can
* happen for reads is that additional read attempts may be
* taken.
Ignore snapshots when performing mirror recovery beneath an origin.
Pass LCK_ORIGIN_ONLY flag around cluster.
Add suspend_lv_origin and resume_lv_origin using LCK_ORIGIN_ONLY.
DM devices were not handled properly on nodes in a cluster that were not
where the splitmirrors command was issued. This was happening because
suspend_lv/resume_lv were being used in a place where activate_lv should
have been used.
When the suspend/resume are issued on (effectively) new LVs, their
'resource' (UUID) is not located in the lv_hash. Thus, both operations
turn into no-ops. You can see this from the output of clvmd from one
of the remote nodes:
<snip>
do_suspend_lv, lock not already held
<snip>
do_resume_lv, lock not already held
'activate_lv' enjoins the other nodes in the cluster to process the lock
and activate the new LV. clvmd output from remote node as follows:
do_lock_lv: resource 'zMseY7CBuO3Ty09vXlplPAHzD0Y0CovjrTdv0R1VcwggMwPdYhutHErRcwm5Nd2S', cmd = 0x19 LCK_LV_ACTIVATE (READ|LV|NONBLOCK), flags = 0x84 (DMEVENTD_MONITOR ), memlock = 1
sync_lock: 'zMseY7CBuO3Ty09vXlplPAHzD0Y0CovjrTdv0R1VcwggMwPdYhutHErRcwm5Nd2S' mode:1 flags=1
sync_lock: returning lkid 27b0001
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
This can happen with older rules (without support for synthesized events)
that are still part of initrd while using new udev rules in the system itself.
The consequence was that new udev rules incorrectly assumed that not having
DM_UDEV_PRIMARY_SOURCE_FLAG set always means the uevent is synthesized and
inappropriate (device is still not properly activated) and so it should be
ignored. However, initrd is not updated automatically while updating the
libdevmapper/udev rules in the system and so we end up with the rules not
detecting and setting crucial parts in the initrd environment and the rules
in the system that rely on the information that should have been stored in
udev db (which is incorrect in this configuration, of course).
The overall consequence is that the update of libdevmapper/lvm2 without
regenerating the initrd could end up with a boot failure! Ignoring the event
means removing any existing symlinks in /dev!
To fix this, increase udev rules version to make a difference. So from now on,
mark rules without proper support for synthesized events as
DM_UDEV_RULES_VSN="1" and 2 (or higher) if that support is included.
We still need to detect this one! We're not so strict with CHANGE events as
with the ADD events while applying filters in the rules so this one would
pass and it would process the rules prematurely (because it appears *before*
the actual CHANGE event used when resuming a DM device while setting read-only
state at the same time).
clvmd daemon itself does the right thing when invoked as non-root, by
returning 4.
The patch removes the use daemon function from
/etc/rc.d/init.d/functions that´s unnecessary and has th bad habit to
mask the return codes from the real daemon.
Add a simple and generic check to see if clvmd is executed by root or not.
Our stop/reload/restart paths in the init script are complex and not all
the tools involved in the process are guaranteed to return 4 if executed
by non-root against a process that´s running as root (for example kill
-TERM will return -1 and parsing the output to catch the error is
suboptimal at best).
https://bugzilla.redhat.com/show_bug.cgi?id=553381
The new standard in the storage industry is to default alignment of data
areas to 1MB. fdisk, parted, and mdadm have all been updated to this
default.
Update LVM to align the PV's data area start (pe_start) to 1MB. This
provides a more useful default than the previous default of 64K (which
generally ended up being a 192K pe_start once the first metadata area
was created).
Before this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 188.00k 192.00k
After this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 1020.00k 1.00m
The heuristic for setting the default alignment for LVM data areas is:
- If the default value (1MB) is a multiple of the detected alignment
then just use the default.
- Otherwise, use the detected value.
In practice this means we'll almost always use 1MB -- that is unless:
- the alignment was explicitly specified with --dataalignment
- or MD's full stripe width, or the {minimum,optimal}_io_size exceeds
1MB
- or the specified/detected value is not a power-of-2
Introduce --norestorefile to allow user to override the new requirement.
This can also be overridden with "devices/require_restorefile_with_uuid"
in lvm.conf -- however the default is 1.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We can already detect MD devices internally. But when using MD partitions,
these have "block extended major" (blkext) assigned (259). Blkext major
is also used in general, so we need to check whether the original device
is an MD device actually.
