IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before removing thin pool LV always make sure, stacked message
for previous run are cleared - but allow to remove any
device that should have been created
(i.e. creation of snapshot failed - so the message for snapshot creation
may be replaced with delete message within unfinished transaction).
Also commit messages after lv remove - so free space is released in pool.
Extend the usage of origin_only flag to allow resume of thin pool LV
(when it's active) to pass only the messages.
origin_only flag will skip detection of already resumed tree for thin_pool,
so we do not need to suspend the tree and we just send messages.
Add pool_has_message and use it in attach_pool_message.
Also update header to make more obvious which segment type is
expected as parameter.
Rename 'read_only' to 'no_update' (no auto update transaction_id)
to better fit how it's used.
Fix problem when there was only one stacked message replaced with delete
message that caused unwanted transaction_id increase.
Failure to do so results in "Performing unsafe table load while X device(s) are
known to be suspended" errors. While fixing the problem in this way works and
is consistent with the way the mirror segment type does it, it would be nice
to find a solution that uses the generic suspend/resume calls.
Also included in this check-in are additions to the test suite that perform
conversions on RAID LVs under a snapshot. These tests are disabled for the
time being due to a kernel bug that is yet to be tracked down.
Since striped name function knows when to report 'linear' instead of
'stripe' type name - drop it from this place.
This fixes problem when reporting segtype e.g. for thin-pool which
is also using area_count=1 to store thin data device reference.
It also returns properly strduped memory instead of badly casted const char*.
Since snapshot needs to suspend origin - it might lead to pool userspace
deadlock (as the pool will wait for new space in case it would be overfilled,
but dmeventd would not be able to resize it, as the lvcreate operation would
have kept the VG lock.)
To minimize the risk of such scenario - we prevent to create new snapshot
in case we are over the threshold - but beware, there is still small timewindow,
so keep threshold at some reasonable level!
New field Data% is able to display info about
thin_pool, thin, snapshot and has generic meaning here.
Simple Time/Host field are here to display host and time creation.
Basic support to keep info when the LV was created.
Host and time is stored into LV mda section.
FIXME: Current version doesn't support configurable string via lvm.conf
and used fixed version strftime "%Y-%m-%d %T %z".
Also, don't allow a splitmirror operation on a RAID LV that is already tracking
a split, unless the operation is to stop the tracking and complete the split.
Example:
~> lvconvert --splitmirrors 1 --trackchanges vg/lv /dev/sdc1
# Now tracking changes - image can be merged back or split-off for good
~> lvconvert --splitmirrors 1 -n new_name vg/lv /dev/sdc1
# ^ Completes split ^
If a split is performed on a RAID that is tracking an already split image and
PVs are provided, we must ensure that
1) the already split LV is represented in the PVs
2) we are careful to split only the tracked image
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.
Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
For write we do not need to hold memory locked.
This relaxes many conditions and avoid problems when allocating
a lot of memory for writting metadata buffers.
(In case of huge MDA size this would lead to mismatch between
locked and unlocked memory region size).
Add also internal check we are not writing in critical section.
Removal of an inactive origin removes also all related snapshots.
When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.
lvremove -f will skip the prompt.
Update region_size only for mirror and raid targets.
This fixes warning messages when vg is using small
extent size like 1KiB and no mirror/raid is created,
but the user still got the message:
$> vgcreate -s 1K vg <pvs>
$> lvcreate -L10K vg
Using reduced mirror region size of 4 sectors
If the extent_size is smaller then the chunk_size we may try
to find better aligment (wasting less space).
i.e. using 4KB extent_size and 64KB chunk size will
lead to creation of 64KB aligned thin volume.
Support allocation of metadata from the same PV, if the VG
is build only from one PV.
As thinp is not mirror - we do not require 2 PVs
for basic thin usage as user is losing only perfomance.
Replace detach_pool_messages with update_pool_lv.
Move creation code from to 'if' condition into 1.
Ensure creation has finished all previous message operations.
All thins are created with the next activation and VG is updated
without messages. Only some basic commands works.
(i.e. lvcreate -an -V10 -T mvg/pool)
There can be some combination to confuse this system.
This functionality for snapshots is going to be interesting.
If something fails during creation of thin LV remove such LV
and deactivate in case it's been already tried to activate
(i.e. thin kernel driver fails for some reason.)
To ensure we properly handle LV cluster locking - explicitely do
not allow to change the availability of the thin pool that is in use
for some thin LV.
As soon as the thin volume is created the only way to activate pool
is via implicit dependency.
Ignore thinpool open count for lv/vgchange operations.
Before adding a new virtual segment to LV, check first whether
the last segment isn't already of the same type. In this case
extend last segment instead of creating the new one.
Thin volumes should have always only 1 virtual segment, but it
helps also to virtual snapshot or error segtype..
Git commit ID 0864378250 was meant to disallow
'mirrored' logs for cluster mirrors. However, when add_mirror_log is used
to create the log (as is now the case when using 'lvcreate' or converting only
the log) the check is bypassed.
This patch adds the check to add_mirror_log.
pvck prints 'extra' character from the label since there is no '\0'
after the struct label entry and just uint64_t follows directly.
So avoid it by limiting 8 chars to be printed.
https://www.redhat.com/archives/lvm-devel/2011-January/msg00109.html
Signed-off-by: Paul Bolle <pebolle tiscali nl>
Since thin is not able to use _lv_insert_empty_sublvs,
remove its appearence from this function.
Start to use extend_pool() function for desired functionality
and modify lv_extend() for this.
Code in _lv_insert_empty_sublvs was not able to provide proper
initialization order for thin pool LV.
New function extend_pool() first adds metadata segment to pool LV which
is still visible. Such LV is activate and cleared.
Then new meta LV is created and metadata segments are moved there.
Now the preallocated pool data segment is attached to the pool LV
and layer _tpool is created. Finaly segment is marked as thin_pool.
This function could be useful for other _manip source files.
Use dm_list manipulation function for provided functionality,
which make the code more readable and avoid touching list
internal details here.
