IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In commit 6ae22125, vgcfgrestore began disabling lvmetad
while running, and rescanned to enable it again at the end,
but missed the rescanning/enabling in the error case.
Reconnect to lvmetad if either the send fails (e.g. lvmetad
was restarted since lvmlockd last connected), or if no
lvmetad connection exists (e.g. lvmetad was started after
lvmlockd so no previous connection existed.)
Currently, a shutdown signal will cause lvmetad to quit
responding to new connections, but not actually exit until
all connections are gone. If a program is maintaining a
long running connection (e.g. lvmlockd, or even an lvm
command) when lvmetad gets a shutdown signal, then all
further commands will hang indefinately waiting for a
response that won't be sent.
With this patch, make lvmetad continue handling new
connections even after a shutdown signal. It will exit
once all connections are gone.
Previously, vgcfgrestore would attempt to vg_remove the
existing VG from lvmetad and then vg_update to add the
restored VG. But, if there was a failure in the command
or with vg_update, the lvmetad cache would be left incorrect.
Now, disable lvmetad before the restore begins, and then
rescan to populate lvmetad from disk after restore has
written the new VG to disk.
Reporting commands can be of different types (even if the command name
is the same):
- pvs command can be either of PVS, PVSEGS or LABEL report type,
- vgs command is of VGS report type,
- lvs command is of LVS or SEGS report type.
Use basic report type when looking for report prefix used for
--configreport option.
This means that:
- 'pvs --configreport pv' applies to PVS, PVSEGS or LABEL report type
- 'vgs --configreport vg' applies to VGS report type
- 'lvs --configreport lv' applies to LVS and SEGS report type
The DM_REPORT_OUTPUT_MULTIPLE_TIMES instructs reporting code to
keep rows even after dm_report_output call - the rows are not
destroyed in this case which makes it possible to call dm_report_output
multiple times.
This allows for moving parts of the code from dm_report_object to
dm_report_output which is important for subsequent patches that allow
for repeated dm_report_output, not destroying rows on each
dm_report_output call.
log_print is used during cmd line processing to log the result of the
operation (e.g. "Volume group vg successfully changed" and similar).
We don't want output from log_print to be interleaved with current
reports from group where log is reported as well. Also, the information
printed by log_print belongs to the log report too, so it should be
rerouted to log report if it's set.
Since the code in libdm-report which is responsible for doing the report
output uses log_print too, we need to use a different kind of log_print
which bypasses any log report currently used for logging (...simply,
we can't call log_print to output the log report itself which in turn
would again reroute to report - the report would never get on output
this way).
This patch adds structures and functions to reroute error and warning
logs to log report, if it's set.
There are 5 new functions:
- log_set_report
Set log report where logging will be rerouted.
- log_set_report_context
Set context globally so any report_cmdlog call will use it.
- log_set_report_object_type
Set object type globally so any report_cmdlog call will use it.
- log_set_report_object_name_and_id
Set object ID and name globally so any report_cmdlog call will use it.
- log_set_report_object_group_and_group_id
Set object group ID and name globally so any report_cmdlog call will use it.
These functions will be called during LVM command processing so any logs
which are rerouted to log report contain proper information about current
processing state.
The lvm fullreport works per VG and as such, the vg, lv, pv, seg and
pvseg subreport is done for each VG. However, if the PV is not part of
any VG yet, we still want to display pv and pvseg subreports for these
"orphan" PVs - so enable this for lvm fullreport's process_each_vg call.
If we have fullreport, make sure that the options/sort keys used for
each report doesn't change its type - we want to preserve the original
type so it's always 5 different subreports within fullreport (vg, lv, pv,
seg, pvseg). Since we have all report types within fullreport, users
should add fields under proper subreport type - this minimizes
duplication of info displayed on output.
Groupable args (the ones marked with ARG_GROUPABLE flag) start a new
group of args if:
- this is the first time we hit such a groupable arg,
- or if non-countable arg is repeated.
However, there may be cases where we want to give priorities when
forming groups and hence force new group creation if we hit an arg
with higher grouping priority.
For example, let's assume (for now) hypothetical sequence of args used:
lvs -o lv_name --configreport log -o log_type --configreport lv -o +vg_name
Without giving any priorites, we end up with:
lvs -o lv_name --configreport log -o log_type --configreport lv -o +vg_name
| | | | | |
\__________GROUP1___________/ \________GROUP2___________/ \_GROUP3_/
This is because we hit "-o" as the first groupable arg. The --configreport,
even though it's groupable too, it falls into the previous "-o" group.
While we may need to give priority to the --configreport arg that should
always start a new group in this scenario instead:
lvs -o lv_name --configreport log -o log_type --configreport lv -o +vg_name
| | | | | |
\_GROUP1_/ \_________GROUP2___________/ \_________GROUP3__________/
So here "-o" started a new group but since "--configreport" has higher
priority than "-o", it starts fresh new group now and hence the rest of
the command line's args are grouped by --configreport now.
lvm fullreport executes 5 subreports (vg, pv, lv, pvseg, seg) per each VG
(and so taking one VG lock each time) within one command which makes it
easier to produce full report about LVM entities.
Since all 5 subreports for a VG are done under a VG lock, the output is
more consistent mainly in cases where LVM entities may be changed in
parallel.
Add any report (pvs/vgs/lvs) currently processed to current report group
which is part of processing handle and which already contains log
report. This way both log report and pvs/vgs/lvs report will be
reported as a whole within a group, thus having same output format as
selected by --reportformat option.
If there's parent processing handle, we don't need to create completely
new report group and status report - we'll just reuse the one already
initialized for the parent.
Currently, the situation where this matter is when doing internal report
to do the selection for processing commands where we have parent processing
handle for the command itself and processing handle for the selection
part (that is selection for non-reporting tools).
Wire up report group creation with log report in struct
processing_handle and call report_format_init during processing handle
initialization (init_processing_handle fn) and destroy it while
destroing processing handle (destroy_processing_handle fn).
This way, all the LVM command processing using processing handle
has access to log report via which the current command log
can be reported as items are processed.
Separating common report and per-report arguments prepares the code for
handling several reports per one command (for example, the command log
report and LVM command report itself).
Each report can have sort keys, options (fields), list of fields to
compact and selection criteria set individually. Hooks for setting these
per report within one command will be a part of subsequent patches, this
patch only separates new struct single_report_args out of existing
struct report_args.
New report/output_format configuration sets the output format used
for all LVM commands globally. Currently, there are 2 formats
recognized:
- basic (the classical basic output with columns and rows, used by default)
- json (output is in json format)
