IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
To allow the names used to describe statistics report objects to
change (for e.g to support groups and region and group aliases)
introduce a new "stats_name" field that evaluates to the correct
name for the object being reported.
Add a pair of commands to create and delete stats groups:
dmstats group --regions REGIONS
dmstats ungroup --groupid ID
REGIONS specifies a list of regions to be included in the group.
Regions are specified as a comma separated list in order of
increasing region ID. Ranges may be specified as a hypen separated
pair of values giving the first and last member of the range.
Add support do dm_stats_walk*() to walk over the set of
available groups using the cursor embedded in the dm_stats
handle, and to obtain the type of the object at the current
stats cursor location. A set of flags is introduced to
control which objects are visited:
DM_STATS_WALK_AREA
DM_STATS_WALK_REGION
DM_STATS_WALK_GROUP
DM_STATS_WALK_ALL
A final flag suppresses visits to regions that contain only a
single area - since the aggregate of such a region is idential
to the area it contains this allows these duplicates to be
filtered out:
DM_STATS_WALK_SKIP_SINGLE_AREA
If flags are not initialised before beginning a walk the default
set matches the behaviour of previous versions of the library.
Also accept group identifiers as immediate arguments to the
counter, metric, and property functions by adding control
flags to the region and area identifiers passed in.
Region and area properties are mapped to their equivalents for
the group (for example: group size is reported as the sum of
all regions contained in the group). Counter and metric values
are aggregated for the region or group.
Introduce constants for the buffer sizes that libdm-stats uses:
one for messages sent to the kernel, one for rows of response data
returned, and a pair for the "start+len" range and histogram bounds
strings.
Add a grouping facility to the libdm-stats library that allows the
user to bind several regions together as a group. Groups may be
used to aggregate data from several regions for reporting, or to
select and sort among large sets of regions.
A textual descriptor ("group tag") is associated with each group
and is stored in the first group member's aux_data field. The
tag contains the group member list and an optional alias for the
group, allowing the user to assign meaningful names to groups of
regions.
These descriptors are parsed in @stats_list message responses and
populate the resulting region and area tables with the group
structure.
Groups with overlapping regions are permitted but since this will
result in some events being counted more than once a warning is
printed in this case.
Nested and overlapping groups are not currently supported and
attempting to create these configurations results in error.
Add a new enum based interface for accessing counter and metric
values that uses a single function for each:
uint64_t dm_stats_get_counter(const struct dm_stats *dms,
dm_stats_counter_t counter
uint64_t region_id, uint64_t area_id);
int dm_stats_get_metric(const struct dm_stats *dms, int metric,
uint64_t region_id, uint64_t area_id,
double *value);
This simplifies the implementation of value aggregation for
groups of regions. The named function interface now calls the
enum interface internally so that all new functionality is
available regardless of the method used to retrieve values.
Cache the device-mapper name of a bound device in the dm_stats
handle.
This will be used by stats groups to report a device name or
user defined alias for groups.
The device-mapper name, device numbers and uuid stored in the
dm_stats handle are used only to bind the handle to a specific
device in order to issue ioctls.
Rename them to "bind_*" to reflect this usage in preparation
for caching the device-mapper name of the bound device in the
dm_stats handle.
This will be used to allow optional aliases to be set for
dmstats groups.
Add a function to parse a list of integer values and ranges into
a dm_bitset representation. Individual values signify that that bit
is set in the resulting mask and ranges are given as a pair of
start and end values, M-N, such that M and N are the first and
last members of the range (inclusive).
The implementation is based on the kernel's __bitmap_parselist()
that is used for cpumasks and other set configuration passed in
string form from user space.
TODO: it might be better to log dmeventd messages with test output
just like we do with clvmd - maybe we will switch to this one
instead of extra DMEVENTD log file in future....
Add config for mkfs to get more predicatable results
when using mkfs across variety of distributions.
In future maybe use this per all tests as default.
For now user has to specify in a test MKE2FS_CONFIG envvar to use it.
When force removing thin-pool we loose 'real' access to hidden device,
and if such pool is in suspended state, any thin volume cannot be
dropped. It likely should be also checked by dmsetup, but meanwhile
apply simple logic - try to force remove first all higher minors first
with assumption we first create thin-pool and then thin volume
and there are usually not being released lower dm numbers to
get the order wrong.
With a single report (--count=1) no timerfd is set up and the cycle
and current timestamps should be freed during the single call to
_update_interval_times().
This patch fixes link validation for used thin-pool.
Udev rules correctly creates symlinks only for unused new thin-pool.
Such thin-pool can be used by foreing apps (like Docker) thus
has /dev/vg/lv link.
However when thin-pool becomes used by thinLV - this link is no
longer exposed to user - but internal verfication missed this
and caused messages like this to be printed upon 'vgchange -ay':
The link /dev/vg/pool should have been created by udev but it was not
found. Falling back to direct link creation.
And same with 'vgchange -an':
The link /dev/vg/pool should have been removed by udev but it is still
present. Falling back to direct link removal.
This patch ensures only unused thin-pool has this link.
Run umount code only when either thin data or metadata are
above 95% - so if there are resize failures with 60%.
system fill keep running.
Also umount will only be tried with lvm2 LVs.
Foreign users are ATM unsuppored.
Add new logic to identify each unique operation and route
it to the correct function to perform it. The functions
that perform the conversions remain unchanged.
This new code checks every allowed combination of LV type
and requested operation, and for each valid combination
calls the function that performs that conversion.
The first stage of option validation which checks for
incompatible combinations of command line options, is done
done before process_each is called. This is unchanged.
(This new code will allow that first stage validation to
be simplified in a future commit.)
The second stage of checking options against the specific
LV type is done by this new code. For each valid combination
of operation + LV type, the new code calls an existing
function that implements it.
With this in place, the ad hoc checks for valid combinations
of LV types and operations can be removed from the existing
code in a future commit.
(The #if 0 is used to keep the patch clean, and the
disabled code will be removed by a following patch.)
There are detailed messages inside _create_dir_recursive that
dm_create_dir calls (except EROFS which where the message is not
generated, like anywhere else in the code).
When we test Vg.LvCreateRaid some of the hidden LVs volume type go from
'I' to 'i' between the time it takes us to create the LV and
the time it takes to call into refresh to verify the service is up to date.
This is a fairly rare occurance.
We call 'lvm help' to find out if fullreport is supported. Lvm
dumps help to stderr. Common code prints a warning if we exit
with 0, but have something in stderr so we are skipping the warning
message.
The following operations would hang if lvm was compiled with
'enable-notify-dbus' and the client specified -1 for the timeout:
* LV snapshot merge
* VG move
* LV move
This was caused because the implementation of these three dbus methods is
different. Most of the dbus method calls are executed by gathering information
needed to fulfill it, placing that information on a thread safe queue and
returning. The results later to be returned to the client with callbacks.
With this approach we can process an arbitrary number of commands without any
of them blocking other dbus commands. However, the 3 dbus methods listed
above did not utilize this functionality because they were implemented with a
separate thread that handles the fork & exec of lvm. This is done because these
operations can be very slow to complete. However, because of this the lvm
command that we were waiting on is trying to call back into the dbus service to
notify it that something changed. Because the code was blocking the process
that handles the incoming dbus activity the lvm command blocked. We were stuck
until the client timed-out the connection, which then causes the service to
unblock and continue. If the client did not have a timeout, we would have been
hung indefinitely.
The fix is to always utilize the worker queue on all dbus methods. We need to
ensure that lvm is tested with 'enable-notify-dbus' enabled and disabled.
