IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In case of e.g. 3 PVs, creating or extending a RaidLV causes SubLV
collocation thus putting segments of diffent rimage (and potentially
larger rmeta) SubLVs onto the same PV. For redundant RaidLVs this'll
compromise redundancy. Fix by detecting such bogus allocation on
lvcreate/lvextend and reject the request.
lvreduce uses _lvseg_get_stripes() which was unable to get raid stripe
info with an integrity layer present. This caused lvreduce on a
raid+integrity LV to fail prematurely when checking stripe parameters.
An unhelpful error message about stripe size would be printed.
There is no easy way to detect, whether device supports zeroing,
and kernel also zeroes device when it's not directly supported,
but with extra message:
operation not supported error, dev X, sector Y op 0x9:(WRITE_ZEROES)...
So to avoid generating such message with every 'lvcreate', use for
zeroing of upto 8K just standard write of zeroed page.
(maybe we can go with even larger sizes).
Remove old code that became incorrect at some point.
It's probably a fragment of an old condition that was left
behind because it wasn't understood. We don't want to drop
the MISSING_PV flag just because the PV has no mda in use.
The device that was missing may have stale data, so the user
needs to decide if the device should be removed or restored.
It looks like force was not being used to enable crypt resize,
but rather to force an inconsistency between LV and crypt
sizes, so this is either not needed or force in this case
should have some other meaning.
This reverts commit ed808a9b54.
Update previous commit
"lvresize: only resize crypt when fs resize is enabled"
to enable crypt resizing when --force is set and --resizefs
is not set. This is because it's been allowed in the past
and people have used it, but it's not a good idea.
There were a couple of cases where lvresize, without --fs resize,
was resizing the crypt layer above the LV. Resizing the crypt
layer should only be done when fs resizing is enabled (even if the
fs is already small enough due to being independently reduced.)
Also, check the size of the crypt device to see if it's already
been reduced independently, and skip the cryptsetup resize if
it's not needed.
Enhance checking vdo constains so it also handles changes of active VDO LVs
where only added difference is considered now.
For this also the reported informational message about used memory
was improved to only list consuming RAM blocks.
Introduce struct vdo_pool_size_config usable to calculate necessary
memory size for active VDO volume.
Function lv_vdo_pool_size_config() is able to read out this
configuration out of runtime DM table line.
18722dfdf4 lvresize: restructure code
mistakenly changed the overprovisioning check from applying
to all lv_is_thin_type lvs to only lv_is_thin_pool lvs, so
it no longer applied when extending thin lvs. The result
was missing warning messages when extending thin lvs.
When executing process_each_lv_in_vg, we process live LVs first and
after that, we process any historical LVs. In case we have just removed
an LV, which also means we have just made it "historical" and so it
appears as fresh item in vg->historical_lvs list, we have to skip it
when we get to processing historical LVs inside the same process_each_lv_in_vg
call.
The simplest approach here, without introducing another LV list, is to
simply mark such historical LVs as "fresh" directly in struct
historical_logical_volume when we have just removed the original LV
and created the historical LV for it. Then, we just need to check the
flag when processing historical LVs and skip it if it is "fresh".
When we read historical LVs out of metadata, they are marked as
"not fresh" and so they can be processed as usual.
This was mainly an issue in conjuction with -S|--select use:
# lvmconfig --type diff
metadata {
record_lvs_history=1
}
(In this example, a thin pool with lvol1 thin LV and lvol2 and lvol3 snapshots.)
# lvs -H vg -o name,pool_lv,full_ancestors,full_descendants
LV Pool FAncestors FDescendants
lvol1 pool lvol2,lvol3
lvol2 pool lvol1 lvol3
lvol3 pool lvol2,lvol1
pool
# lvremove -S 'name=lvol2'
Logical volume "lvol2" successfully removed.
Historical logical volume "lvol2" successfully removed.
...here, the historical LV lvol2 should not have been removed because
we have just removed its original non-historical lvol2 and the fresh
historical lvol2 must not be included in the same processing spree.
The new option "--fs String" for lvresize/lvreduce/lvextend
controls the handling of file systems before/after resizing
the LV. --resizefs is the same as --fs resize.
The new option "--fsmode String" can be used to control
mounting and unmounting of the fs during resizing.
Possible --fs values:
checksize
Only applies to reducing size; does nothing for extend.
Check the fs size and reduce the LV if the fs is not using
the affected space, i.e. the fs does not need to be shrunk.
Fail the command without reducing the fs or LV if the fs is
using the affected space.
resize
Resize the fs using the fs-specific resize command.
This may include mounting, unmounting, or running fsck.
See --fsmode to control mounting behavior, and --nofsck to
disable fsck.
resize_fsadm
Use the old method of calling fsadm to handle the fs
(deprecated.) Warning: this option does not prevent lvreduce
from destroying file systems that are unmounted (or mounted
if prompts are skipped.)
ignore
Resize the LV without checking for or handling a file system.
Warning: using ignore when reducing the LV size may destroy the
file system.
Possible --fsmode values:
manage
Mount or unmount the fs as needed to resize the fs,
and attempt to restore the original mount state at the end.
nochange
Do not mount or unmount the fs. If mounting or unmounting
is required to resize the fs, then do not resize the fs or
the LV and fail the command.
offline
Unmount the fs if it is mounted, and resize the fs while it
is unmounted. If mounting is required to resize the fs,
then do not resize the fs or the LV and fail the command.
Notes on lvreduce:
When no --fs or --resizefs option is specified:
. lvextend default behavior is fs ignore.
. lvreduce default behavior is fs checksize
(includes activating the LV.)
With the exception of --fs resize_fsadm|ignore, lvreduce requires
the recent libblkid fields FSLASTBLOCK and FSBLOCKSIZE.
FSLASTBLOCK*FSBLOCKSIZE is the last byte used by the fs on the LV,
which determines if reducing the fs is necessary.
Names matching internal code layout.
Functionc in thin_manip.c uses thin_pool in its name.
Keep 'pool' only for function working for both cache and thin pools.
No change of functionality.
When lvcreate is makeing VDO pool and user has not specified -V size,
ATM we actually run 'vdoformat' twice to get properly 'extent' aligned
size matching lvm2 properties - so the 2nd. run of vdoformat actually
can stay with 'log_verbose()' so the standard printed result
is not showing confusing info (which is now also correctly using
print_unless_silent)
When creating VDO pool based of % values, lvm2 is now more clever
and avoids to create 'unsupportable' sizes of physical backend
volumes as 16TiB is maximum size supported by VDO target
(and also limited by maximum supportable slabs (8192) based on slab
size.
If the requested virtual size is approaching max supported size 4PiB,
switch header size to 0.
Newer VDO kernel target require to have matching virtual size - this
however cause incompatiblity when lvcreate is let to format VDO data
device and read the usable size from vdoformat.
Altough this is a kernel regression and will likely get fixed,
lvm2 can actually reformat VDO device to use properly aligned VDO LV
size to make this problem disappear.
Add function to check for avaialble memory for particular VDO
configuration - to avoid unnecessary machine swapping for configs
that will not fit into memory (possibly in locked section).
Formula tries to estimate RAM size machine can use also with
swapping for kernel target - but still leaving some amount of
usable RAM.
Estimation is based on documented RAM usage of VDO target.
If the /proc/meminfo would be theoretically unavailable, try to use
'sysinfo()' function, however this is giving only free RAM without
the knowledge about how much RAM could be eventually swapped.
TODO: move _get_memory_info() into generic lvm2 API function used
by other targets with non-trivial memory requirements.
When thin-pool had queued some delete message on extension operation
such message has been 'lost' and thin-pool kernel metadata has been
left with a thin volume that no longer existed for lvm2 metadata.
dev_name(dev) returns "[unknown]" if there are no names
on dev->aliases. It's meant mainly for log messages.
Many places assume a valid path name is returned, and
use it directly. A caller that wants to use the path
from dev_name() must first check if the dev has any
paths with dm_list_empty(&dev->aliases).
When compiled and used with:
CFLAGS="-fsanitize=address -g -O0"
ASAN_OPTIONS=strict_string_checks=1:detect_stack_use_after_return=1:check_initialization_order=1:strict_init_order=1
we have few reported issue - they where not normally spotted, since
we were still accessing our own memory - but ouf of buffer-range.
TODO: there is still something to enhance with handling of #orphan vgids
After a vg_write, this function was used to attempt to
make lvmcache data match the new state written to disk.
It was not updated correctly in a many or most cases,
and the resulting lvmcache is not actually used after
vg_write, making the update unnecessary.
pvscan --cache <dev>
. read only dev
. create online file for dev
pvscan --listvg <dev>
. read only dev
. list VG using dev
pvscan --listlvs <dev>
. read only dev
. list VG using dev
. list LVs using dev
pvscan --cache --listvg [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. [check online files and report if VG is complete]
pvscan --cache --listlvs [--checkcomplete] <dev>
. read only dev
. create online file for dev
. list VG using dev
. list LVs using dev
. [check online files and report if VG is complete]
. [check online files and report if LVs are complete]
[--vgonline]
can be used with --checkcomplete, to enable use of a vg online
file. This results in only the first pvscan command to see
the complete VG to report 'VG complete', and others will report
'VG finished'. This allows the caller to easily run a single
activation of the VG.
[--udevoutput]
can be used with --cache --listvg --checkcomplete, to enable
an output mode that prints LVM_VG_NAME_COMPLETE='vgname' that
a udev rule can import, and prevents other output from the
command (other output causes udev to ignore the command.)
The list of complete LVs is meant to be passed to lvchange -aay,
or the complete VG used with vgchange -aay.
When --checkcomplete is used, lvm assumes that that the output
will be used to trigger event-based autoactivation, so the pvscan
does nothing if event_activation=0 and --checkcomplete is used.
Example of listlvs
------------------
$ lvs -a vg -olvname,devices
LV Devices
lv_a /dev/loop0(0)
lv_ab /dev/loop0(1),/dev/loop1(1)
lv_abc /dev/loop0(3),/dev/loop1(3),/dev/loop2(1)
lv_b /dev/loop1(0)
lv_c /dev/loop2(0)
$ pvscan --cache --listlvs --checkcomplete /dev/loop0
pvscan[35680] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
LV vg/lv_a complete
LV vg/lv_ab incomplete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop1
pvscan[35681] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
LV vg/lv_b complete
LV vg/lv_ab complete
LV vg/lv_abc incomplete
$ pvscan --cache --listlvs --checkcomplete /dev/loop2
pvscan[35682] PV /dev/loop2 online, VG vg is complete.
VG vg complete
LV vg/lv_c complete
LV vg/lv_abc complete
Example of listvg
-----------------
$ pvscan --cache --listvg --checkcomplete /dev/loop0
pvscan[35684] PV /dev/loop0 online, VG vg incomplete (need 2).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop1
pvscan[35685] PV /dev/loop1 online, VG vg incomplete (need 1).
VG vg incomplete
$ pvscan --cache --listvg --checkcomplete /dev/loop2
pvscan[35686] PV /dev/loop2 online, VG vg is complete.
VG vg complete
Consider missing config tree from vg read to be an internal error
since we do not want to 'regenerate' this one in expesive parsing way.
Also if there is any failure on recreating committed VG, make it also
a 'vg_write' error.
Corrupt metadata text (with good mda header) was being handled
in the label_scan phase, but not in the vg_read phase. This
was sufficient because metadata areas would always be read and
checksummed during label_scan (metadata parsing was skipped
previously as an optimization.)
This changed with the optimization in
commit 61a6f9905e
"metadata: optimize reading metadata copies in scan"
Now, some metadata areas will not be read and checksummed
at all during the label_scan phase, only during the vg_read
phase. This means that bad metadata text may first be detected
in the vg_read phase. So, add equivalent bad metadata handling
to the vg_read path to match the label_scan path.
When creating lvm2 metadata for VG, lvm2 allocate some buffer,
and if buffer is not big enough, the buffer is 'reallocated' bigger,
and whole metadata creation is repeated until metadata fits.
We can try to use 'previous' metadata size as hint to reduce looping
here.
When cache creation fails on table reload path, implemen more
advanced revert solution, that tries to restore state of LVM
metadata into is look before actual caching started.
New versions of kvdo module exposes statistics at new location:
/sys/block/dm-XXX/vdo/statistics/...
Enhance lvm2 to access this location first.
Also if the statistic info is missing - make it 'debug' level info,
so it is not failing 'lvs' command.
Since VDO is always returns 'zero' on unprovisioned read
and every provisioned block is always 'zeroed' on partial writes,
we can avoid 'zeroing' of such LVs.
pvid and vgid are sometimes a null-terminated string, and
other times a 'struct id', and the two types were often
cast between each other. When a struct id was cast to a char
pointer, the resulting string would not necessarily be null
terminated. Casting a null-terminated string id to a
struct id is fine, but is still avoided when possible.
A struct id is: int8_t uuid[ID_LEN]
A string id is: char pvid[ID_LEN + 1]
A convention is introduced to help distinguish them:
- variables and struct fields named "pvid" or "vgid"
should be null-terminated strings.
- variables and struct fields named "pv_id" or "vg_id"
should be struct id's.
- examples:
char pvid[ID_LEN + 1];
char vgid[ID_LEN + 1];
struct id pv_id;
struct id vg_id;
Function names also attempt to follow this convention.
Avoid casting between the two types as much as possible,
with limited exceptions when known to be safe and clearly
commented.
Avoid using variations of strcpy and strcmp, and instead
use memcpy/memcmp with ID_LEN (with similar limited
exceptions possible.)
When splitting VG with thin/cache pool volume, handle pmspare during
such split and allocate new pmspare in new VG or extend existing pmspare
there and eventually drop pmspare in original VG if is no longer needed
there.
dev_cache_index_devs() is taking a large amount of time
when there are many PVs. The index keeps track of
devices that are currently in use by active LVs. This
info is used to print warnings for users in some limited
cases.
The checks/warnings that are enabled by the index are not
needed by pvscan --cache, so disable it in this case.
This may be expanded to other cases in future commits.
dev_cache_index_devs should also be improved in another
commit to avoid the extreme delays with many devices.
Add profilable configurable setting for vdo pool header size, that is
used as 'extra' empty space at the front and end of vdo-pool device
to avoid having a disk in the system the may have same data is real
vdo LV.
For some conversion cases however we may need to allow using '0' header size.
TODO: in this case we may eventually avoid adding 'linear' mapping layer
in future - but this requires further modification over lvm code base.
Previously there have been necessary explicit call of backup (often
either forgotten or over-used). With this patch the necessity to
store backup is remember at vg_commit and once the VG is unlocked,
the committed metadata are automatically store in backup file.
This may possibly alter some printed messages from command when the
backup is now taken later.
Instead of calling explicit archive with command processing logic,
move this step towards 1st. vg_write() call, which will automatically
store archive of committed metadata.
This slightly changes some error path where the error in archiving
was detected earlier in the command, while now some on going command
'actions' might have been, but will be simply scratched in case
of error (since even new metadata would not have been even written).
So general effect should be only some command message ordering.
We can consider the drive firmware a server to handle the locking
request from nodes, this essentially is a client-server model.
DLM uses the kernel as a central place to manage locks, so it also
complies with client-server model for locking operations. This is
why IDM and DLM are similar with each other for their wrappers.
This patch largely works by generalizing the DLM code paths and then
providing degeneralized functions as wrappers for both IDM and DLM.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
The autoactivation property can be specified in lvcreate
or vgcreate for new LVs/VGs, and the property can be changed
by lvchange or vgchange for existing LVs/VGs.
--setautoactivation y|n
enables|disables autoactivation of a VG or LV.
Autoactivation is enabled by default, which is consistent with
past behavior. The disabled state is stored as a new flag
in the VG metadata, and the absence of the flag allows
autoactivation.
If autoactivation is disabled for the VG, then no LVs in the VG
will be autoactivated (the LV autoactivation property will have
no effect.) When autoactivation is enabled for the VG, then
autoactivation can be controlled on individual LVs.
The state of this property can be reported for LVs/VGs using
the "-o autoactivation" option in lvs/vgs commands, which will
report "enabled", or "" for the disabled state.
Previous versions of lvm do not recognize this property. Since
autoactivation is enabled by default, the disabled setting will
have no effect in older lvm versions. If the VG is modified by
older lvm versions, the disabled state will also be dropped from
the metadata.
The autoactivation property is an alternative to using the lvm.conf
auto_activation_volume_list, which is still applied to to VGs/LVs
in addition to the new property.
If VG or LV autoactivation is disabled either in metadata or in
auto_activation_volume_list, it will not be autoactivated.
An autoactivation command will silently skip activating an LV
when the autoactivation property is disabled.
To determine the effective autoactivation behavior for a specific
LV, multiple settings would need to be checked:
the VG autoactivation property, the LV autoactivation property,
the auto_activation_volume_list. The "activation skip" property
would also be relevant, since it applies to both normal and auto
activation.
Function is not having the best name since it does check
no just raid LVs to be in sync.
Restore the mirror percentage checking - although without retries,
since only raid target is currently known to need it - for other
types it would be ATM a bug to get inconsistent result.
