IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Revert part of commit 51a29e6056,
it's probably bad idea to continue with any recovery, when
vg_write() or vg_commit() fail - so it's better to leave it as it is.
When deactivating origin, we may have possibly left table in broken state,
where origin is not active, but snapshot volume is still present.
Let's ensure deactivation of origin detects also all associated
snapshots are inactive - otherwise do not skip deactivation.
(so i.e. 'vgchange -an' would detect errors)
Let's use this function for more activations in the code.
'needs_exlusive' will enforce exlusive type for any given LV.
We may want to activate LV in exlusive mode, even when we know
the LV (as is) supports non-exlusive activation as well.
lvcreate -ay -> exclusive & local
lvcreate -aay -> exclusive & local
lvcreate -aly -> exclusive & local
lvcreate -aey -> exclusive (might be on any node).
Activate of new/unused/empty thin pool volume skips
the 'overlay' part and directly provides 'visible' thin-pool LV to the user.
Such thin pool still gets 'private' -tpool UUID suffix for easier
udev detection of protected lvm2 devices, and also gets udev flags to
avoid any scan.
Such pool device is 'public' LV with regular /dev/vgname/poolname link,
but it's still 'udev' hidden device for any other use.
To display proper active state we need to do few explicit tests
for this condition.
Before it's used for any lvm2 thin volume, deactivation is
now needed to avoid any 'race' with external usage.
Call check_new_thin_pool() to detect in-use thin-pool.
Save extra reactivation of thin-pool when thin pool is not active.
(it's now a bit more expensive to invoke thin_check for new pools.)
For new pools:
We now active locally exclusively thin-pool as 'public' LV.
Validate transaction_id is till 0.
Deactive.
Prepare create message for thin-pool and exclusively active pool.
Active new thin LV.
And deactivate thin pool if it used to be inactive.
Allowing 'external' use of thin-pools requires to validate even
so far 'unused' new thin pools.
Later we may have 'smarter' way to resolve which thin-pools are
owned by lvm2 and which are external.
Show some stats with 'lvs'
Display same info for active cache volume and cache-pool.
data% - #used cache blocks/#total cache blocks
meta% - #used metadata blocks/#total metadata blocks
copy% - #dirty/#used cache blocks
TODO: maybe there is a better mapping
- should be seen as first-try-and-see.
When the cache pool is unused, lvm2 code will internally
allow to activate such cache-pool.
Cache-pool is activate as metadata LV, so lvm2 could easily
wipe such volume before cache-pool is reused.
Replace lv_cache_block_info() and lv_cache_policy_info()
with lv_cache_status() which directly returns
dm_status_cache structure together with some calculated
values.
After use mem pool stored inside lv_status_cache structure
needs to be destroyed.
Add init of no_open_count into _setup_task().
Report problem as warning (cannot happen anyway).
Also drop some duplicated debug messages - we have already
printed the info about operation so make log a bit shorter.
Add API call to calculate extents from percentage value.
Size is based in DM_PERCENT_1 units.
(Supporting decimal point number).
This commit is preparing functionality for more global
usage of % with i.e. --size option.
Support compile type configurable defaults for creation
of sparse volumes.
By default now create 'thin-pools' for sparse volumes.
Use the global/sparse_segtype_default to switch back to old
snapshots if needed.
Apply the same compile logic for newly introduces mirror/raid1 options.
Unlike with thin-pool - with cache we support all args also
directly when create cache volume.
So the result of 'separate' cache-pool creation and setting its
options should give same result as specifying those args
during cache creation.
Cache-pool values are used as defaults if the params are
not specified with cache creation.
Move code for creation of thin volume into a single place
out of lv_extend(). This allows to drop extra pool arg
for alloc_lv_segment() && lv_extend() and makes code
more easier to read and follow.
When we create volumes with chunk size bigger then extent size
we try to round up to some nearest chunk boundary.
Until now we did this for thins - use same logic for
cache volumes.
Use segment flags to avoid zeroing of cache, cache pool
snapshot and thin pool segments.
We never want to zero these segment types.
Note:
Snapshot COW and Cache origin are created as stripes
thus are then properly zeroed.
Refactor lvcreate code.
Prefer to use arg_outside_list_is_set() so we get automatic 'white-list'
validation of supported options with different segment types.
Drop used lp->cache, lp->cache and use seg_is_cache(), seg_is_thin()
Draw clear border where is the last moment we could change create
segment type.
When segment type is given with --type - do not allow it to be changed
later.
Put together tests related to individual segment types.
Finish cache conversion at proper part of lv_manip code after
the vg_metadata are written - so we could correcly clean-up created
stripe LV for cache volume.
Move test for size of new LV names in front before
any creation of LV.
Properly check striped segtype kernel presence,
since passed 'segtype' is already tested.
Keep deactivation error path local to wiping part of the function.
Create metadata with temporary flag (it's activated, zeroed
and deactivated).
Introduce new option to specify pool data size.
This will be user to create i.e. cache & cachepool at once.
And possible for thin external origin snapshot.
This is only very basic patch to enable options, the
real working code will come later.
We want to print smarter warning message only when
the zeroing was not provided on the first zeroable segment
of newly created LV.
Put warning within _should_wipe_lv function to avoid reevaluation
of same conditions twice.
Hide creation of temporary LVs and print them only in verbose mode.
e.g. hides confusing message about creation of _pmspare
device during creation of pool.
Use new libdm macro DM_LIST_HEAD_INIT().
Embeded 'free' segment type (so it's not needed in the list)
Drop assignments of 0,NULL since they are defaults.
Ask for lock the proper LV.
Use the top-most LV to query for locally exclusive lock.
The rest of operations are then using 'lv_info()'
TODO:
Check all devices are reloaded from proper level.
In general any query on lv_is_active is supposed to be running
ona lv_lock_holder() volume.
Now we reference segment name via lvseg_name() and
we can drop default implementation and leave its
function pointer to be NULL.
Default give us 'return seg->segtype->name'.
Instead of segtype->ops->name() introduce lvseg_name().
This also allows us to leave name() function 'empty' for default
return of segtype->name.
TODO: add functions for rest of ops->
There was a bug in value and their synonym definition for these two fields
causing selections on these fields to not work correctly - nothing matched
against vg/lv_permissions fields even if selection criteria should have
matched.
Scenario:
$ lvs -o name,lv_permissions vg
LV LPerms
lvol0 read-only
lvol1 writeable
Before this patch:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
(blank)
$ lvs -o name,lv_permissions vg -S 'permissions=writeable
(blank)
With this patch applied:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
LV LPerms
lvol0 read-only
$ lvs -o name,lv_permissions vg -S 'permissions=writeable'
LV LPerms
lvol1 writeable
Also synonyms match correctly now:
$ lvs -o name,lv_permissions vg -S 'permissions=rw'
LV LPerms
lvol1 writeable
We can't hang on blocked or suspended devices when the scan is done
for lvmetad update - when the device gets unblocked or resumed, there's
always CHANGE event generated which will fire the udev rule to run
extra pvscan --cache for that device which makes sure that lvmetad
is up-to-date.
When we are given an existing LV name - it needs to be allowed
to pass in even restricted name as the LV could have existed
long before we introduced some new restriction on prefix/suffix.i
Fix the regression on name limits and drop restriction to be applied
on any existing LVs - only the new created LV names have to be
complient with current name restrictions.
FIXME: we are currently using restricted names incorrectly in few
other places - device_is_usable() skips restricted names,
and udev flags are also incorrectly set for restricted names
so these LVs are not getting links properly.
find_pv_in_vg fn iterates over the list of PVs covered by the VG and
each PV's pvl->pv->dev is compared with device acquired from device
cache. However, in case pvl->pv->dev is NULL as well as device cache
returns NULL (e.g. when device is filtered), we'll get incorrect match
and the code calling find_pv_in_vg uses incorrect PV (as it thinks
it's the exact PV with the pv_name). The INTERNAL_ERROR covers this
situation and errors out immediately.
The warnings arg was used to enable logging of warnings
when reading a PV. This arg is turned into a set of flags
with the WARN_PV_READ flag matching the existing behavior.
A new flag WARN_INCONSISTENT is added that will cause
vg_read_internal() to log the "VG is not consistent"
warning so the various callers do not need to log
this warning themselves.
A new vg_read flag READ_WARN_INCONSISTENT is used from
reporting to enable the WARN_INCONSISTENT flag in
vg_read_internal.
[Committed by agk with cosmetic changes and tweaks.]
Process PVs by iterating through VGs, then iterating through
devices if the command needs to process non-PV devices.
The process_single function can always use the VG and PV args.
[Committed by agk with cosmetic changes and tweaks.]
Introduce pool function for validation of chunk size.
It's good idea to be able to reject invalid chunk size
when entered on command line before we open VG.
Move code to better locations.
Improve test and remove invalid ones
(i.e. no reason to require cache size to be >= then origin).
Correctly comment where the code is doing actual conversion
of other existing volume - we do already a similar thing with
external origins.
Lots of new command line options and combinations is now supported.
Hopefully older syntax still works as well.
lvcreate --cache --cachepool vg/pool -l1
lvcreate --type cache --cachepool vg/pool -l1
lvcreate --type cache-pool vg/pool -l1
lvcreate --type cache-pool --name pool vg -l1
... and many many more ...
Since _pmspare is internal volume move it to
lv_remove_single - so it's automatically removed with
last remove thin-pool.
lv_remove_with_dependencies() is not always used for pool removal.
The cache mode of a new cache pool is always explicitly
included in the vg metadata. If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".
The cache mode can be displayed with lvs -o+cachemode.
filters/filter-usable.c:22: warning: "ucp.check_..." may be used uninitialized in this function
This can't actually be hit in real, but let's clean this up for the compiler
to be happy again.
There are actually three filter chains if lvmetad is used:
- cmd->lvmetad_filter used when when scanning devices for lvmetad
- cmd->filter used when processing lvmetad responses
- cmd->full_fiilter (which is just cmd->lvmetad_filter + cmd->filter chained together) used
for remaining situations
This patch adds the third one - "cmd->full_filter" - currently this is
used if device processing does not fall into any of the groups before,
for example, devices which does not have the PV label yet and we're just
creating a new one or we're processing the devices where the list of the
devices (PVs) is not returned by lvmetad initially.
Currently, the cmd->full_filter is used exactly in these functions:
- lvmcache_label_scan
- _pvcreate_check
- pvcreate_vol
- lvmdiskscan
- pvscan
- _process_each_label
If lvmetad is used, then simply cmd->full_filter == cmd->filter because
cmd->lvmetad_filter is NULL in this case.
We need to use proper filter chain when we disable lvmetad use
explicitly in the code by calling lvmetad_set_active(0) while
overriding existing configuration. We need to reinitialize filters
in this case so proper filter chain is used. The same applies
for the other way round - when we enable lvmetad use explicitly in
the code (though this is not yet used).
With this change, the filter chains used look like this now:
A) When *lvmetad is not used*:
- persistent filter -> regex filter -> sysfs filter ->
global regex filter -> type filter ->
usable device filter(FILTER_MODE_NO_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
B) When *lvmetad is used* (two separate filter chains):
- the lvmetad filter chain used when scanning devs for lvmetad update:
sysfs filter -> global regex filter -> type filter ->
usable device filter(FILTER_MODE_PRE_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
- the filter chain used for lvmetad responses:
persistent filter -> usable device filter(FILTER_MODE_POST_LVMETAD) ->
regex filter
Usable device filter is responsible for filtering out unusable DM devices.
The filter has 3 modes of operation:
- FILTER_MODE_NO_LVMETAD:
When this mode is used, we check DM device usability by looking:
- whether device is empty
- whether device is blocked
- whether device is suspended (only on devices/ignore_suspended_devices=1)
- whether device uses an error target
- whether device name/uuid is reserved
- FILTER_MODE_PRE_LVMETAD:
When this mode is used, we check DM device usability by looking:
- whether device is empty
- whether device is suspended (only on devices/ignore_suspended_devices=1)
- whether device uses an error target
- whether device name/uuid is reserved
- FILTER_MODE_POST_LVMETAD:
When this mode is used, we check DM device usability by looking:
- whether device is blocked
- whether device is suspended (only on devices/ignore_suspended_devices=1)
These modes will be used by subsequent patch to create different
instances of this filter, depending on lvmetad use.
Currently, there are 5 things that device_is_usable function checks
(for DM devices only, of course):
- is device empty?
- is device blocked? (mirror)
- is device suspended?
- is device composed of an error target?
- is device name/uuid reserved?
If answer to any of these questions is "yes", then the device is not usable.
This patch just adds possibility to choose what to check for exactly - the
device_is_usable function now accepts struct dev_usable_check_params make
this selection possible. This is going to be used by subsequent patches.
When compiled with valgrind pool support - don't waste time
with preallocation of memory - it just waste of CPU cycles to
trace access to this memory.
We also may get slightly better estimation about real memory usage
during command processing.
We are not using already defined segement type names where we could.
There is a lot of other places in device-mapper and LVM2 we have those
hardcoded so we should better finally have a common interface in
libdevmapper to avoid this.
Use of lv_info() internally in lv_check_not_in_use(),
so it always could use with_open_count properly.
Skip sysfs() testing in open_count == 0 case.
Accept just 'lv' pointer like other functions.
The function has 'built-in' lv_is_active_locally check,
which however is not what we need to check in many place.
For now at least remotely active snapshot merge is
detected and for this case merge on next activation is scheduled.
We use adjusted_mirror_region_size() in two different contexts.
Either on command line -
here we do want to inform user about reduction of size.
Or in pvmove activation context -
here we should only use 'verbose' info.
When requesting to reload an LV imrove this API to
automatically reload its lock holding LV as in cluster
only top-level LVs are addressable with lock.
When vg_ondisk is NULL we do not need to search
through the whole VG to find out the same LV.
NOTE: as of now - VG locking is not enabled as some code parts
are breaking memory locking rules (lvm2app).
Once we enforce VG locking for read-only commands the effect
will be much better for larger VGs.
Do not let fly metadata with just 'minor' set
(since they would not be readable on older version)
Be permissive with invalid major/minor number and
just report them as problem, but allow to use
such metadata with default major:minor.
Use nice instruction_HLT macro
Use log_debug_mem()
Don't actually log things after we prohibit 'mmap'.
Move initialization of strerror & udev before blocking mmap.
Add code to trap both mmap implementation on 32bit arch.
Use dlsym()
Use hlt instraction instead of int3 - generates usable stack trace
when problem is catched.
If we want to support conversion of VG to clustered type,
we currently need to relock active LV to get proper DLM lock.
So add extra loop after change of VG clustered attribute
to exlusively activate all active top level LVs.
When doing change -cy -> -cn we should validate LVs are not
active on other cluster nodes - we could be sure about this only
when with local exclusive activation - for other types
we require user to deactivate volumes first.
As a workaround for this limitation there is always
locking_type = 0 which amongs other skip the detection
of active LVs.
FIXME:
clvmd should handle looks for cluster locking type all the time.
While we could probably reacquire some type of lock when
going from non-clustered to clustered vg, we don't have any
single road back to drop the lock and keep LV active.
For now keep it safe and prohibit conversion when LV
is active in the VG.
