IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A merged snapshot's DM device is made to use the "error" target as part
of lvm's transaction to merge a snapshot. This snapshot merge use-case
aside, any device using the error target shouldn't be scanned.
Based on review comments, rename a few fields in lvm_property_type.
In particular, change 'is_writeable' to 'is_settable', which is
more intuitive to the intent of the bitfield (a 'set' function
exists for this field/property). Also, remove the char array
for 'id' - unnecessary as we can just use the string passed in
to do the strcmp. Finally rename the union members from n_val
to 'integer' and 's_val' to 'string'.
to lvm.conf in the activation section: 'snapshot_autoextend_threshold' and
'snapshot_autoextend_percent', that define how to handle automatic snapshot
extension. The former defines when the snapshot should be extended: when its
space usage exceeds this many percent. The latter defines how much extra space
should be allocated for the snapshot, in percent of its current size.
Problem:
When both legs of a mirrored log fail, neither the log nor the parent
mirror can proceed. The repair code must be careful to replace the
log with an error target before operating on the parent - otherwise,
the parent can get stuck trying to suspend because it can't push through
any writes. The steps to replace the log device with an error target
were incomplete and resulted in the replacement not happening at all!
The code originally had all the necessary logic to complete the
replacement task, but was pulled out in a effort to clean-up that
section of code, while fixing another bug:
<offending commit msg>
In addition, I added following three changes.
- Removed tmp_orphan_lvs handling procedure
It seems that _delete_lv() can handle detached_log_lv properly
without adding mirror legs in mirrored log to tmp_orphan_lvs.
Therefore, I removed the procedure.
- Removed vg_write()/vg_commit()
Metadata is saved by vg_write()/vg_commit() just after detached_log_lv
is handled. Therefore, I removed vg_write()/vg_commit().
</offending commit msg>
http://sources.redhat.com/cgi-bin/cvsweb.cgi/LVM2/lib/metadata/mirror.c?cvsroot=lvm2&f=h#rev1.130
I've reverted the "clean-up" changes associated with that fix, but not what
that commit was actually fixing.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
page.
Add ->target_name to segtype_handler to allow a more specific target
name to be returned based on the state of the segment.
Result of trying to merge a snapshot using a kernel that doesn't have
the snapshot-merge target:
Before:
# lvconvert --merge vg/snap
Can't expand LV lv: snapshot target support missing from kernel?
Failed to suspend origin lv
After:
# lvconvert --merge vg/snap
Can't process LV lv: snapshot-merge target support missing from kernel?
Failed to suspend origin lv
Unable to merge LV "snap" into it's origin.
Use _even_rand() function instead of floor() in _bitset_with_random_bits().
floor() function is missing in dietlibc (on architectures other than x86).
Moreover using floor() to clip rand results does not assure even result
distribution. _even_rand() uses integer arithmetic only and is designed to
return evenly distributed results.
> Looks OK to me. It took a while to decipher what is the exact meaning of
> the loop in _even_rand (to a non-pseudorandomness-expert) but I am
> fairly comfortable with it now. If I understand this correctly, it
> rejects numbers that come from an "incomplete" slice of the RAND_MAX
> space (considering the number space [0, RAND_MAX] is divided into some
> "max"-sized slices and at most a single smaller slice, between [n*max,
> RAND_MAX] for suitable n -- numbers from this last slice are discarded
> because they could distort the distribution in favour of smaller
> numbers).
Signed-off-by: Przemyslaw Iskra <sparky <at> pld-linux.org>
Reviewed-by: Petr Rockai <prockai <at> redhat.com>
In other LVM memory structures such as volume_group, the field
used to store flags is called "status", and on-disk fields are called
'flags', so rename the one inside metadata_area to be consistent.
Not only is it more consistent with existing code but is cleaner
to say "the status of this mda is ignored".
Background for this patch - prajnoha pinged me on IRC this morning
about a fix he was working on related to metadataignore when
metadata/dirs was set. I was reviewing my patches from this year
and realized the 'flags' field was probably not the best choice
when I originally did the metadataignore patches.
Current lvm1 allocation code seems to not properly
map segments on missing PVs.
For now disable this functionality.
(It never worked and previous commit just introduced segfault here.)
So the partial mode in lvm1 can only process missing PVs
with no LV segments only.
Also do not use random PV UUID for missing part but use fixed
string derived from VG UUID (to not confuse clvmd tests).
We need to use a similar function for pv and lv properties, so just make
a generic _get_property() function that contains most of the required
functionality. Also, add a check to ensure the field name matches the
object passed in by re-using report_type_t enum. For pv properties,
the report_type might be either PVS or LABEL.
In addition, add 'const' to 'get' functions object parameter, but not
'set' functions. Add _not_implemented_set() and _not_implemented_get()
functions.
Add 'get' functions based on generic macros for VG, PV, and LV.
Add 'get' functions for vg string fields, vg_name, vg_fmt, vg_sysid,
vg_uuid, vg_attr, and vg_tags, and all numeric fields.
Add supporting functions for vg_name, vg_fmt, vg_system_id.
Append "_dup" to end of supporting functions to make clear the strings
are dup'd and to avoid namespace conflict with vg_name.
Add supporting functions for pv_uuid, vg_uuid, and lv_uuid.
Call new function id_format_and_copy. Use 'const' where appropriate.
Add "_dup" suffix to indicate memory is being allocated.
Call {pv|vg|lv}_uuid_dup from lvm2app uuid functions.
This patch addresses code review request to simplify creation of 'attr'
strings. The simplification is done in this separate patch to more
easily review and ensure the simplification is done without error.
Move the creating of the 'attr' strings into a common function so
they can be called from the 'disp' functions as well as the new
'get' property functions.
Add "_dup" suffix to indicate memory is allocated.
Refactor pvstatus_disp to take pv argument and call pv_attr_dup().
This patch is similar to the other patches for pv and vg
functionality, and separates lv functionality into separate
files, concentrating on reporting fields and simple functions.
The metadata.[ch] files are very large. This patch makes a first
attempt at separating out pv functions and data, particularly
related to the reporting fields calculations.
More code could be moved here but for now I'm stopping at reporting
functions 'get' / 'set' functions.
The metadata.[ch] files are very large. This patch makes a first
attempt at separating out vg functions and data, particularly
related to the reporting fields calculations.
Read complete content of /proc/self/maps into one buffer without
realocation in the middle of reading and before doing any m/unlock
operation with these lines - as some of them gets change.
With previous implementation we've read some mappings twice ([stack])
If some lvm1 device is missing, lvm fails on all operations
# vgcfgbackup -f bck -P vg_test
Partial mode. Incomplete volume groups will be activated read-only.
3 PV(s) found for VG vg_test: expected 4
PV segment VG free_count mismatch: 152599 != 228909
PV segment VG extent_count mismatch: 152600 != 228910
Internal error: PV segments corrupted in vg_test.
Volume group "vg_test" not found
Allow loading of lvm1 partial VG by allocating "new" missing PV,
which covers lost space. Also this fake mising PV inform code
that it is partial VG.
https://bugzilla.redhat.com/show_bug.cgi?id=501390
Revert to old glibc behaviour for vsnprintf used in emit_to_buffer fn.
Otherwise, the check that follows would be wrong for new glibc versions.
This caused the rh bug #633033 to be undetected and pass throught the check,
corrupting the metadata!
In certain configurations, we're not under a VG rw lock while trying to write
a new archive file with VG metadata. A common example is using "vgs" while
having the content of backup and archive directories empty. The code scans the
content of these directories and tries to determine the final index that should
be used in archive name. Since we're not under a lock, we can get into a race
while choosing the index which could end up showing errors about not being able
to rename to final archive name. Let's add random number suffix to these archive
file names so we can avoid the race.
For example, when using '--config "backup { ... }"' line, the values from
lvm.conf (or default values) should be overridden. This patch adds
reinitialisation of archive and backup handling on toolcontext refresh
which makes these settings to be applied.
to block when a mirror under a snapshot suffers a failure.
The problem has to do with label scanning. When a mirror suffers
a failure, the kernel blocks I/O to prevent corruption. When
LVM attempts to repair the mirror, it scans the devices on the
system for LVM labels. While mirrors are skipped during this
scanning process, snapshot-origins are not. When the origin is
scanned, it kicks up I/O to the mirror (which is blocked)
underneath - causing the label scan (an thus the repair operation)
to hang.
This patch simply bypasses snapshot-origin devices when doing
labels scans (while ignore_suspended_devices() is set). This
fixes the issue.
introduced in commit b16b4d92a7
"Improve various log messages."
fixes a lot of
../include/metadata.h:148: warning: type qualifiers ignored on function return type
Add "devices/default_data_alignment" to lvm.conf to control the internal
default that LVM2 uses: 0==64k, 1==1MB, 2==2MB, etc.
If --dataalignment (or lvm.conf's "devices/data_alignment") is specified
then it is always used to align the start of the data area. This means
the md_chunk_alignment and data_alignment_detection are disabled if set.
(Same now applies to pvcreate --dataalignmentoffset, the specified value
will be used instead of the result from data_alignment_offset_detection)
set_pe_align() still looks to use the determined default alignment
(based on lvm.conf's default_data_alignment) if the default is a
multiple of the MD or topology detected values.
Add 'get' functions based on the simple macro function definition for a
numeric property.
Add 'get' functions for the following: _vg_extent_count_get,
_vg_free_count_get, _max_lv_get, _max_pv_get, _pv_count_get,
_lv_count_get, _snap_count_get, _vg_seqno_get, _vg_size_get,
_vg_free_get, vg_mda_*.
For size functions, multiply by SECTOR_SIZE to return the value in bytes.
Extend the existing reporting infrastructure definitions and structures
to include a 'get' and 'set' function for each field. We will provide
a 'get' and 'set' function for each of these fields, which will be utilized
by exported lvm2app functions.
Define a default _not_implemented 'get' and 'set' function that just sets
an errno and returns 0. Future patches will actually implement the
specific 'get' and 'set' functions for each property. For read-only
properties, only the 'get' function will be implemented.
Define vg_get_property() function to query a property. We will call
this from a lvm2app function.
The 'id' entries in columns.h are the report field names. Since these are
unique, we'd like to use them in generation of 'get' / 'set' functions.
As a step towards using them for this purpose, remove the explicit double
quotes and use the macro '#' character to add the double quotes back when
placing them into the '_fields' array 'id' member.
Add a 'flags' field to columns.h, and set it to 0 by default.
Define FIELD_MODIFIABLE flag to indicate whether a 'set' function exists
to change the field's value.
In all top vg read functions only LCK_VG_READ/WRITE can be used.
All other vg lock definitions are low-level backend machinery.
Moreover, LCK_WRITE cannot be tested through bitmask.
This patch fixes these mistakes.
For _recover_vg() we do not need lock_flags, it can be only
two of above and we always upgrading to LCK_VG_WRITE lock there.
(N.B. that code is racy)
There is no functional change in code (despite wrong masking
it produces correct bits:-)
One shiny day we should use libblkid here. But now using LUKS is
very common together with LVM and pvcreate destroys LUKS completely.
So for user's convenience, try to detect LUKS signature and allow abort.
pvcreate detects MD and swap signature.
The logic hidden there is not only documented but it is also
user unfriendly. Who invented this logic should run pvcreate
on its own critical MD device to see why;-)
This patch
- creates one function instead of duplication code
- asks if user want to overwrite signature
- allows aborting (!)
(Please note that writing LVM signatute without wiping old
is wrong, it confuses blkid, MD will not work anyway and
swap and LUKS is broken too.)
Ignore snapshots when performing mirror recovery beneath an origin.
Pass LCK_ORIGIN_ONLY flag around cluster.
Add suspend_lv_origin and resume_lv_origin using LCK_ORIGIN_ONLY.
DM devices were not handled properly on nodes in a cluster that were not
where the splitmirrors command was issued. This was happening because
suspend_lv/resume_lv were being used in a place where activate_lv should
have been used.
When the suspend/resume are issued on (effectively) new LVs, their
'resource' (UUID) is not located in the lv_hash. Thus, both operations
turn into no-ops. You can see this from the output of clvmd from one
of the remote nodes:
<snip>
do_suspend_lv, lock not already held
<snip>
do_resume_lv, lock not already held
'activate_lv' enjoins the other nodes in the cluster to process the lock
and activate the new LV. clvmd output from remote node as follows:
do_lock_lv: resource 'zMseY7CBuO3Ty09vXlplPAHzD0Y0CovjrTdv0R1VcwggMwPdYhutHErRcwm5Nd2S', cmd = 0x19 LCK_LV_ACTIVATE (READ|LV|NONBLOCK), flags = 0x84 (DMEVENTD_MONITOR ), memlock = 1
sync_lock: 'zMseY7CBuO3Ty09vXlplPAHzD0Y0CovjrTdv0R1VcwggMwPdYhutHErRcwm5Nd2S' mode:1 flags=1
sync_lock: returning lkid 27b0001
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
The new standard in the storage industry is to default alignment of data
areas to 1MB. fdisk, parted, and mdadm have all been updated to this
default.
Update LVM to align the PV's data area start (pe_start) to 1MB. This
provides a more useful default than the previous default of 64K (which
generally ended up being a 192K pe_start once the first metadata area
was created).
Before this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 188.00k 192.00k
After this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 1020.00k 1.00m
The heuristic for setting the default alignment for LVM data areas is:
- If the default value (1MB) is a multiple of the detected alignment
then just use the default.
- Otherwise, use the detected value.
In practice this means we'll almost always use 1MB -- that is unless:
- the alignment was explicitly specified with --dataalignment
- or MD's full stripe width, or the {minimum,optimal}_io_size exceeds
1MB
- or the specified/detected value is not a power-of-2
Introduce --norestorefile to allow user to override the new requirement.
This can also be overridden with "devices/require_restorefile_with_uuid"
in lvm.conf -- however the default is 1.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We can already detect MD devices internally. But when using MD partitions,
these have "block extended major" (blkext) assigned (259). Blkext major
is also used in general, so we need to check whether the original device
is an MD device actually.
An incorrect fix on July 13, 2010 for an annoyance has caused a regression.
The offending check-in was part of the 2.02.71 release of LVM. That
check-in caused any PVs specified on the command line to be ignored when
performing a mirror split.
This patch reverses the aforementioned check-in (solving the regressions)
and posits a new solution to the list reversal problem. The original
problem was that we would always take the lowest mimage LVs from a mirror
when performing a split, but what we really want is to take the highest
mimage LVs. This patch accomplishes that by working through the list in
reverse order - choosing the higher numbered mimages first. (This also
reduces the amount of processing necessary.)
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Takahiro Yasui <takahiro.yasui@hds.com>
all but one mirror leg.
<patch header>
To handle a double failure of a mirrored log, Jon's two patches are
commited, however, lvconvert command can't still handle an error
when mirror leg and mirrored log got failure at the same time.
[Patch]: Handle both devices of a mirrored log failing (bug 607347)
posted: https://www.redhat.com/archives/lvm-devel/2010-July/msg00009.html
commit: https://www.redhat.com/archives/lvm-devel/2010-July/msg00027.html
[Patch]: Handle both devices of a mirrored log failing (bug 607347) -
additional fix
posted: https://www.redhat.com/archives/lvm-devel/2010-July/msg00093.html
commit: https://www.redhat.com/archives/lvm-devel/2010-July/msg00101.html
In the second patch, the target type of mirrored log is replaced with
error target when remove_log is set to 1, but this procedure should be
also used in other cases such as the number of mirror leg is 1. This
patch relocates the procedure to the main path.
In addition, I added following three changes.
- Removed tmp_orphan_lvs handling procedure
It seems that _delete_lv() can handle detached_log_lv properly
without adding mirror legs in mirrored log to tmp_orphan_lvs.
Therefore, I removed the procedure.
- Removed vg_write()/vg_commit()
Metadata is saved by vg_write()/vg_commit() just after detached_log_lv
is handled. Therefore, I removed vg_write()/vg_commit().
- With Jon's second patch, we think that we don't have to call
remove_mirror_log() in _lv_update_mirrored_log() because will be
handled remove_mirror_images() in _lvconvert_mirrors_repaire().
</patch header>
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
The cluster log daemon (cmirrord) is not multi-threaded and
can handle only one request at a time. When a log is stacked
on top of a mirror (which itself contains a 'core' log), it
creates a situation that cannot be solved without threading.
When the top level mirror issues a "resume", the log daemon
attempts to read from the log device to retrieve the log
state. However, the log is a mirror which, before issuing
the read, attempts to determine the 'sync' status of the
region of the mirror which is to be read. This sync status
request cannot be completed by the daemon because it is
blocked on a read I/O to the very mirror requesting the
sync status.
CMIRRORD_PIDFILE is not defined. This makes the build fail.
Therefore, we need to conditionalize the check for cmirrord
based on if CMIRRORD_PIDFILE is defined.
mirrors, we must also check that the log daemon (cmirrord) is running.
The log module can be auto-loaded, but the daemon cannot be
"auto-started". Failing to check for the daemon produces cryptic
messages that customers have a hard time deciphering. (The system
messages do report that the log daemon is not running, but people
don't seem to find this message easily.)
Here are examples of what is printed when the module is available,
but the log daemon has not been started.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg
Shared cluster mirrors are not available.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg -v
Setting logging type to disk
Finding volume group "vg"
Archiving volume group "vg" metadata (seqno 3).
Creating logical volume lv
Executing: /sbin/modprobe dm-log-userspace
Cluster mirror log daemon is not running
Shared cluster mirrors are not available.
Creating volume group backup "/etc/lvm/backup/vg" (seqno 4).
The main problem with these bugs was that the newly split
off LV was not being suspended properly. This meant that
the memlock count was not being balanced, the DM devices
were not being renamed, and some DM devices which should
have been removed were not.
I've also renamed some of the variables and added comments
to make things clearer as to what is going on. (I can break
this patch in two if it means easier review.)
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
This should bring less confusion when there are some settings left and
people just forgot about it and then they run into problems. These messages
should give them a hint of what's really going on.
even though there was no log. A simple run through the in-tree test
suite would have caught this. :(
- if (lv_is_mirrored(detached_log_lv) &&
+ if (detached_log_lv && lv_is_mirrored(detached_log_lv) &&
Also, made some cosmetic changes suggested by kabi after my last check-in
(e.g. s/return 0/return_0/ and adding an error message).
A previous check-in added logic to handle the case where both images
of a mirrored log failed. It solved the problem by simply removing
the log entirely - leaving the parent mirror with a 'core' log. This
worked for most cases. However, if there was a small delay between
the failures of the two mirrored log devices, the mirror would hang,
LVM would hang, and no additional LVM commands could be issued.
When the first leg of the log fails, it signals the need for repair.
Before 'lvconvert --repair' is run by dmeventd, the second leg fails.
'lvconvert' would see both devices as failed and try to remove the
log entirely. When it came time to suspend the parent mirror to
update the configuration, the suspend would hang because it couldn't
get any I/O through the mirrored log, which was plugged waiting for
corrective action. The solution is to replace the log with an error
target to clear any pending writes before removing it. This allows
the parent mirror to suspend and make the proper changes.
Pass metadataignore through PV creation / setup paths.
As a result of this cleanup, we can remove the unnecessary setting
of mda_ignore bits inside pvcreate_single(), after call to pv_create.
For now, just set metadataignore to '0' in some places. This is
equivalent to the prior functionality, although the 0 is given
by the caller not hardcoded in _mda_setup() call.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
- If a PV contained empty mdas, the auto-recovery code was not kicking in.
- The 'inconsistent' state was getting lost when metadata was cached so
recovery didn't kick in. But leave the behaviour alone when using
precommitted metadata because of a warning in a confusing FIXME.
In my testing, pvs and vgs didn't repair inconsistent metadata like they
used to do. (How many other tools fail similarly now?)
And there should be no need to cache inconsistent metadata because it is
supposed to get repaired under the protection of a write lock immediately it is
discovered.
This code is in need of a redesign based on first principles.
I still see bugs in this code and this commit is risky.
Allow metadataignore flag to be passed in to pvcreate.
Ideally, more refactoring of the mda allocation / initialization
is warranted, but for now, we just add another parameter to 'add_mda'
to take an existing mda ignored flag. We need to do this or pv_write
loses the state of the mda 'ignored' flag before copying and writing
to disk.
Print device name when setting or clearing metadata ignore bit.
Example:
label/label.c:160 /dev/loop2: lvm2 label detected
cache/lvmcache.c:1136 lvmcache: /dev/loop2: now in VG #orphans_lvm2 (#orphans_lvm2)
metadata/metadata.c:4142 Setting mda ignored flag for metadata_locn /dev/loop2.
format_text/text_label.c:318 Skipping mda with ignored flag on device /dev/loop2 at offset 4096
Logging isn't ideal, especially for mda_set_ignore. Ideally we'd
like to display the device name and offset in this case but this
requires a bit more work and a per-format 'mda_description' function
pointer definition (we don't have access to mda_context in
metadata.c).
In preparation to call this from both pvcreate as well as pvchange,
move the guts of metadataignore into a library function.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
There's an intermittent failure with vgcfgbackup that seems to have been
introduced with the metadataignore / vgmetadatacopies patchset.
Intermittent failures are often the result of uninitialized data,
so this patch calls zalloc in a few places it might matter.
Allowing an 'all' and 'unmanaged' value is more intuitive, and
provides a simple way for users to get back to original LVM behavior
of metadata written to all PVs in the volume group.
If the user requests "--vgmetadatacopies unmanaged", this instructs
LVM not to manage the ignore bits to achieve a specific number of
metadata copies in the volume group. The user is free to use
"pvchange --metadataignore" to control the mdas on a per-PV basis.
If the user requests "--vgmetadatacopies all", this instructs LVM
to do 2 things: 1) clear all ignore bits, and 2) set the "unmanaged"
policy going forward.
Internally, we use the special MAX_UINT32 value to indicate 'all'.
This 'just' works since it's the largest value possible for the
field and so all 'ignore' bits on all mdas in the VG will get
cleared inside _vg_metadata_balance(). However, after we've
called the _vg_metadata_balance function, we check for the special
'all' value, and if set, we write the "unmanaged" value into the
metadata. As such, the 'all' value is never written to disk.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The check in vg_split_mdas will trigger an error if the 'from' vg
list is empty. However, this might be ok in some instances now
that we have ignored mdas. Relax this check so an error is triggered
only in the case where there's truly no more mdas in the 'from'
vg.
One example of where this makes a difference is with vgreduce.
If we try to vgreduce a PV with un-ignored mdas, this should trigger
the balancing function to un-ignore mdas on another PV in the VG.
However, we don't get to vg_write() before we fail because this
list size check fails, and we see an error message indicating:
"Cannot remove final metadata area ..."
Another example is with vgsplit into a new VG, where the PVs
being moved contain all ignored mdas. We must move the mdas on
fid->metadata_areas_ignored from 'vg_from' to 'vg_to'.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The vgextend path calls add_pv_to_vg(). Inside add_pv_to_vg(),
we must ensure we pass the correct mdas list into pv_setup(), as
copies of mdas are placed on the vg->fid list. If we don't place
the mdas on the correct vg->fid list, the various counts may be
incorrect and the metadata balance algorithm will not work when
called from vg_write() path.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Compare the value of the newly added vg_mda_copies field
(--vgmetadatacopies parameter) with the current count of
in-use mdas and ignoring or unignoring mdas as necessary to
get to the target count. Also, as a safety check before
returning, ensure we have at least one mda enabled.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds the ability to read/write the vg->mda_copies values
from/to the vg metadata.
If we read the VG metadata and this field does not exist, we set
mda_copies to the default value of 0. Later in the code, we use
this special '0' value to indicate a disable of metadata balancing.
This should preserve existing LVM behavior and ensure metadata balancing
can be turned off should the need arise.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds the get and partially implemented set function.
The 'set' function should probably ignore or un-ignore metadata areas
based on new values.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a field to struct volume_group to later implement metadata
balancing:
- mda_copies: target # of non-ignored mdas in the VG; default 0 (do
not control pv 'ignore mdas' bit.
This patch just adds the parameter to the structures with the default
values but does not modify any commands. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Arrange mdas so mdas that are to be ignored come first. This is an
optimization that ensures consistency on disk for the longest period of time.
This was noted by agk in review of the v4 patchset of pvchange-based mda
balance.
Note the following example for an explanation of the background:
Assume the initial state on disk is as follows:
PV0 (v1, non-ignored)
PV1 (v1, non-ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
If we did not sort the list, we would have a commit sequence something like
this:
PV0 (v2, non-ignored)
PV1 (v2, ignored)
PV2 (v2, ignored)
PV3 (v2, non-ignored)
After the commit of PV0's mdas, we'd have an on-disk state like this:
PV0 (v2, non-ignored)
PV1 (v1, non-ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
This is an inconsistent state of the disk. If the machine fails, the next
time it was brought back up, the auto-correct mechanism in vg_read would
update the metadata on PV1-PV3. However, if possible we try to avoid
inconsistent on-disk states. Clearly, because we did not sort, we have
a greater chance of on-disk inconsistency - from the time the commit of
PV0 is complete until the time PV3 is complete.
We could improve the amount of time the on-disk state is consistent by simply
sorting the commit order as follows:
PV1 (v2, ignored)
PV2 (v2, ignored)
PV0 (v2, non-ignored)
PV3 (v2, non-ignored)
Thus, after the first PV is committed (in this case PV1), on-disk we would
have:
PV0 (v1, non-ignored)
PV1 (v2, ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
This is clearly a consistent state. PV1 will be read but the mda will be
ignored. All other PVs contain v1 metadata, and no auto-correct will be
required. In fact, if we commit all PVs with ignored mdas first, we'll
only have an inconsistent state when we start writing non-ignored PVs,
and thus the chances we'll get an inconsistent state on disk is much
less with the sorted method.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When we are constructing the vg, we may need to adjust the list of
metadata_areas if there are ignored mdas. At label read time, we
do not read the metadata of ignored mdas, and as a result, they do
not get placed on vg->fid->metadata_areas inside _text_create_text_instance
since lvmcache does not have these areas attached to vginfo->infos.
However, when we're checking the pvids inside _vg_read, after having
read another metadata area from another PV, we do have the opportunity
to update the metadata_area and metadata_areas_ignored lists based
on the read metadata_area. We need accurate mda lists for the reporting
functions that count the ignored mdas, as well as general correctness
of mda balancing.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
With the addition of ignored mdas, we replace all checks for an empty
mda list with a new function to look for either an empty mda list or
ignored mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a helper function to consolidate checking for an empty mdas list
or ignored mdas. Ignored mdas should behave almost identically to
an empty mda list - the metadata areas should not be read or written
to. This function will make it easier to implement metadata balancing
and easier to track pvs with an empty mda list or ignored mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
We implement ignore of an mda at label_read time by checking for
the ignore bit, and then skipping the reading of the vgname and
other information in the metadata. This will have an effect similar
to a PV found with no mdas. Thus, it will look like an orphan in the
cache until we scan the rest of the system and find a PV with
metadata, and the mda will not be on the vg->fid->metadata_areas
list so no read/writes will be done to the metadata area.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Define a new pvs field, pv_mda_used_count, and a new vgs field,
vg_mda_used_count to match the existing pv_mda_count and vg_mda_count.
These new fields count the number of mdas that have the 'ignored' bit
clear (they are in use on the PV / VG). Also define various supporting
functions to implement the counting as well as setting the ignored
flag and determining if an mda is ignored. These high level functions
call into the lower level location independent mda ignore functions
defined by earlier patches.
Note that counting ignored mdas in a vg requires traversing both lists
and checking for the ignored bit on the mda. The count of 'ignored'
mdas then is defined by having the bit set, not by which list the mda
is on. The list does determine whether LVM actually does read/write to
the mda, though we must count the bits in order to return accurate numbers
for the various counts. Also, pv_mda_set_ignored must search both vg
lists for ignored mda. If the state changes and needs to be committed
to disk, the ignored mda will be on the non-ignored list.
Note also in pv_mda_set_ignored(), we must properly manage the mda lists.
If we change the ignored state of an mda, we must change any mdas on
vg->fid->metadata_areas that correspond to this pv. Also, we may
need to allocate a copy of the mda, as is done when fid->metadata_areas
is populated from _vg_read(), if we are un-ignoring an ignored mda.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a second mda list, metadata_areas_ignored to fid, and a couple
functions, fid_add_mda() and fid_add_mdas() to help manage the lists.
These functions are needed to properly count the ignored mdas and
manage the lists attached to the 'fid' and ultimately the 'vg'.
Ensure metadata_areas_ignored is initialized in other formats, even
if the list is never used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Because of the way mdas are handled internally, where a PV in a VG
has mdas on both info->mdas and vg->fid->metadata_areas list, we
need a location independent copy constructor for struct
metadata_area. Break up the existing format-text specific copy
constructor into a format independent piece and a format dependent
piece.
This function is necessary to properly implement pv_set_mda_ignored().
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
A metadata_area is defined independent of the location. One downside
is that there is no obvious mapping from a pv to an mda. For a PV in
a VG, we need a way to start with a PV and end up with an MDA, if we
are to manage mdas starting with a device/pv. This function provides
us a way to go down the list of PVs on a VG, and identify which ones
match a particular PV.
I'm not entirely happy with this approach, but it does fit into the
existing structures in a reasonable way.
An alternative solution might be to refactor the VG - PV interface such
that mdas are a list tied to a PV. However, this seemed a bit tricky since
a PV does not come into existence until after the list of mdas is
constructed (see _vg_read() - we create a 'fid' and attach mdas to it,
then we go through them and attach pvs).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
We'd like to pass in mda_header to vgname_from_mda(). In order to
do this, we need to call raw_read_mda_header() from text_label.c,
_text_read(), which gets called from the label_read() path, and
peers into the metadata and update vginfo cache. We should check
the disable bit here, and if set, not peer into the vg metadata,
thus reducing the I/O to disk.
In the process, move vgname_from_mda() to layout.h, since the fn
only gets called from format_text code, and we need the mda_header
definition from the private layout.h.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This refactoring moves the device open/close up one level to the caller of
_vg_read_raw_area(). Should be no functional change and facilitate future
changes related to metadata balancing.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
First we add a 'flags' field to the location independent
metadata_area structure, and a MDA_IGNORE flag. The
mda_is_ignored and mda_set_ignored functions are added to
manage the flag. Adding the flag and functions gives a
library interface to ignore metadata areas independent of
the underlying location (disk, file, etc). The location
specific read/write functions must then handle the specifics
of what this flag means to the location.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Adding a flag to the 'rlocn' structure in the mda header of the
text format allows us to flip a bit to ignore an area on disk that
stores the metadata via the text format specific mda_header.
This patch defines the flag and access functions to manage the flag.
Other patches will manage the ignore on a format-independent basis,
by using a flag in the metadata_area structure.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Future patches will make use of a specific flag in the on-disk 'raw_locn'
structure to enable/disable metadata areas, and facilitate metadata
balancing.
Note that 'filler' is always set to '0' (see add_mda() - memset),
so use of this area as a non-zero flags field is a safe way to
provide future code features.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The same region size is used for both mirror volume and mirrored
log volume, but when the physical extent size is bigger than region size,
the size of mirror leg for mirrored log is smaller than the region size
and lvcreate command fails.
This patch adjusts a region size of mirrored log to a smaller value of
region size or physical extent size.
[This patch ensures that the region_size of the mirrored log does not
exceed the size of the mirrored log itself, which would violate the
kernel constraint: (region_size <= ti->len).]
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Preload libc.mo file for localized lvm before taking memory lock - this way
we prevent disk access for some error paths in libdm, that prints localized
errno messages while they are still in memory locked state.
converting from 2-way to 3-way mirror (collapse_mirrored_lv)
was calling '_remove_mirror_images' with the 'remove_log'
parameter set. When the code was put in to fix 599898 to
honor log parameters during conversion, this argument was
suddenly being honored. Thus, when someone would convert from
a 2-way to 3-way mirror, the log would get removed.
'collapse_mirrored_lv' should not be calling '_remove_mirror_images'
with 'remove_log' set.
to 3-way mirror. When conversion operations are performed on
these types of mirrors, log options can be confused/ignored.
In the case of a converting 3-way mirror, we have a top-level
2-way corelog mirror whose legs are 1) a 2-way disk-log mirror
and 2) a linear device. If we wish to convert this 3-way mirror
to a 2-way mirror, the linear device is removed and the extra
top layer is eliminated. If we also wished to convert the disk
log to a core log in the same step, ambiguity creeps in. It is
somewhat obvious what the user wants - a 2-way mirror with a
corelog. However, looking at the top level mirror before
compression, it seems that the mirror already has a core log.
This is why the operation seemed to fail.
This patch simply re-evaluates what mirrored_seg points to after
a compression and then considers the log argument.
This is a fix for bug 599898.
Code is mixing up internal DLM and LVM definitions of lock
modes and flags.
OpenAIS and singlenode locking do not depend on DLM but
code currently cannot be compiled without libdlm.h!
LCK_* flags is LVM abstraction, used through all the code.
Only low-level backend (clvmd-cman etc) should use DLM definitions,
also this code should do all needed conversions.
Because there are two DLM flags used in generic code
(NOQUEUE, CONVERT) we define it similar way like lock modes.
(So all needed binary-compatible flags are on one place in locking.h)
(Further code cleaning still needed, though:-)
Adding function _add_partial_replicator_to_dtree() to create
partial tree for Replicator target.
Using dm_tree_node_set_presuspend_node() for Replicator.
Introduce struct cmd_vg to store information about needed
volume group name, vgid, flags and the pointer to opened VG.
Keep VGs list in alphabetical order for locking order.
Introduce functions:
cmd_vg_add() add new cmd_vg entry.
cmd_vg_lookup() search cmd_vgs for vg_name.
cmd_vg_read() open VGs in cmd_vgs list.
cmd_vg_release() close VGs in reversed order.
Add pointer to linked list of opened VGs. List temporarily keeps
the information about needed or locked and opened VGs for replicator target.
Also add cmd_missing_vgs flag information for quick check and
also for possible continuos process_each_lv() usage where we need
to detect whether failure has been caused by missing VG or
some other reason.
Adding configure.in support for Replicators.
Adding basic lib lvm support for Replicators.
Adding flags REPLICATOR and REPLICATOR_LOG.
Adding segments SEG_REPLICATOR and SEG_REPLICATOR_DEV.
Adding basic methods for handling replicator metadata.
Some commands start with a pvname, but we'd like to force users to
start with a vg handle to obtain a pv handle. Our best option seems
to be providing a way to look up the vgname from the pvname, and then
require them to use vg_read/vg_open.
In addition to the pvname lookup function, this patch also provides a
lookup by pvid. The lookup by pvid can be used in conjunction with
lvmcache_get_pvids to process all pvs in the system.
The pvid find function first calls lvmcache_vgname_from_pvid, which may
cause the label to be read if it is not in the cache. If the vgname is
returned is an orphan, we then check to see if there are metadata areas,
and if not, we scan every PV on the system by calling scan_vgs_for_pvs().
In most cases we should not need to do this, and by using the info->mdas
count, we avoid calling pv_read() as prior code did. So this patch is a
bit cleaner and should allow us to refactor more of the pv code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
are active mirrors or snapshots.
We don't have the mechanisms in place to change the device-mapper
tables for those targets that have behavioral differences between
cluster and single machine instances. Allowing users to change
the attribute but not changing the target's behavior can lead to
data corruption.
The following bugs are fixed/avoided by this patch:
235123 - vgchange -c [ny] do not change target types when necessary
289331 - RFE: switching from cluster domain to local domain needs to deactivate volume somehow
289541 - when changing from local to cluster, volumes can not appear to be deactivated
This should avoid various races between dmeventd on multiple nodes
in cluster where one node already repairing device and another
run full scan and locks the device.
the device cache file is dumped both in vgscan and clvmd process.
Unfortunately, clvmd calls lvmcache_label_scan,
it properly destroys persistent filter, but during
persistent_filter_dump it merges old cache content back!
This causes that change in filters is not properly propagated
into device cache after vgscan on cluster.
(Only new devices are added.)
https://bugzilla.redhat.com/show_bug.cgi?id=591861
A shortcut for --ignorelockingfailure, --ignoremonitoring, --poll n options
and LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable used all at
once in initialisation scripts (e.g. rc.sysinit or initrd).
Target install_dm_plugin installs files to libdir/device-mapper.
Target install_lvm2_plugin installs files to libdir/lvm2.
Both targets creates relative links to libdir to keep the code
compatible with current dlopen handling.
Once we will be able to read plugins from subdir, links
could be removed.
being able to remove more images from a mirror than the
number of PVs directly specified for removal.
The effort to fix bug 581611 corrected a bug that was unnoticed
at the time. The loop in _remove_mirror_images that looks over
the specified PVs was allowing devices that were previously
counted and moved to the end of the list to be double-counted.
This resulted in the number of devices needed for removal always
being satisfied - even if the user did not specify enough PVs
for removal to satisfy the request. When 581611 was fixed, this
double-counting no longer took place and the result was to remove
only the minimum of the number of PVs specified or the number
that was asked to be removed.
By simply always setting 'new_area_count' (as used to be done
only in the else statement), we return to the previous behavior.
Indeed, this is exactly what the double-counting was allowing
to happen before the fix of 581611.
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).
A merging snapshot cannot be removed directly but the associated origin
can be. Disallow removal of a merging snapshot unless the associated
origin is also being removed.
There's no need for foreign udev rules to touch LVM reserved devices
(snapshot, pvmove, _mlog, _mimage, _vorigin) even if they happen to
be visible. The same applies for /dev/disk content - no need to create
any content for these devices (and so no need to run any "blkid" etc.).
This also prevents setting any inotify "watch" from udev rules on such
devices that is a source of race conditions (the rules need to honor
DM_UDEV_DISABLE_OTHER_RULES_FLAG for this to work though).
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.
When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.
This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).
This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.
The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
Internally, we used DM names instead of UUIDs while processing event
handlers. This caused problems while trying to vgrename a VG with active LVs
where the names are being changed and so the devices were not found then.
The patch also contains a little bit of refactoring, moving "build_dlid" code
found in dev_manager.c to "build_dm_uuid", now in lvm-string.c (so we have
build_dm_uuid and build_dm_name at one place).