IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
To more easily recognize unselected state from select '0' state
add new 'THIN_ZERO_UNSELECTED' enum.
Same applies to THIN_DISCARDS_UNSELECTED.
For those we no longer need to use PASS_ARG_ZERO or PASS_ARG_DISCARDS.
Basically code moving operation to have a single place resolving
thin_pool_chunk_size_policy.
Supported are generic & performance profiles.
Function is now shared between thin manipulation code and configuration
_CFG logic to obtain defaults and handle correct reporting upward coding
stack.
In addition to the already supported conversion between 2-legged
raid1 and raid5, raid1 and raid4 can be also converted into each
other with 2 legs (raid4/5 are limited to map a 2-legged raid1).
This patch supports the missing raid4 conversion in the sequence
linear -> 2-legged raid1 -> raid4/5, then restripe to more than one
data stripes for performance and resilience reasons and optionally
convert to striped/raid0.
The other conversion sequence is also possible by converting N-way
striped/raid0 to raid4/5, then restripe to 2 legs followed by a
conversion to raid1 and optionally to linear (loosing all resilience).
On conversion from striped to raid0, data LVs are created
and all segments and their respective areas of the striped
LV are moved across to new segments allocated for the raid0
image LVs. This can cause non-canonical segments to be added
to the image LVs.
Add a call to lv_merge_segments() once all segments have been
added to an image LV to compensate for that. This avoids
unsafe table loads on activation.
Fix comments.
Splitting off an image LV of a 2-legged
raid1 LV causes loss of resilience.
Ask user to avoid uninformed loss of all resilience.
Don't ask for N > 2 legged raid1 LVs.
Adjust tests.
Splitting off an image LV of a 2-legged raid1 LV tracking changes
causes loosing partial resilience for any newly written data set.
Full resilience will be provided again after the split off image LV
got merged back in and the new data set got fully synchronized.
Reason being that the data is only stored on the remaining single
writable image during the split.
Ask user to avoid uninformed loss of such partial resilience.
Don't ask for N > 2 legged raid1 LVs.
In case N images fail (N <= parity chunks) _and_
a "vgreduce --removemissing --force VG" was applied
a following repair of the RaidLV fails:
Unable to remove N images: Only 0 devices given.
Failed to remove the specified images from tb/r.
Failed to replace faulty devices in tb/r.
Fix as of this commit results in correct repair:
Faulty devices in tb/r successfully replaced.
seg->extents_copied has to be defined properly on reducing
the size of a raid LV or conversion from raid5 with 1 stripe
to raid1 will fail.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Reshaping a raid5 LV to one stripe aiming to convert it to
raid1 (and optionally to linear) reports the wrong LV size
when still having reshape space allocated.
The lv_extend/_lv_reduce API doesn't cope with resizing RaidLVs
with allocated reshape space and ongoing conversions. Prohibit
resizing during conversions and remove the reshape space before
processing resize. Add missing seg->data_copies initialisation.
Fix typo/comment.
For the time being raid10 is limited to even number of total stripes
as is and 2 data copies. The number of stripes provided on creation
of a raid10(_near) LV with -i/--stripes gets doubled to define
that even total number of stripes (i.e. images).
Apply the same on disk adding conversions (reshapes) with
"lvconvert --stripes RaidLV" (e.g. 2 stripes = 4 images
total converted to 3 stripes = 6 images total).
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Enhance the raid report functions for the recently added LV fields
reshape_len, reshape_len_le, data_offset, new_data_offset, data_copies,
data_stripes and parity_chunks to cope with "lvs --select".
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Now that we got the "data_stripes" field key, adjust the "stripes" field description.
Enhance the "regionsize" field description to cover raids as well.
Commit 48778bc503 introduced new RAID reshaping related report fields.
The inclusioon of segtype.h in properties.c isn't mandatory, remove it.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
During an ongoing reshape, the MD kernel runtime reads stripes relative
to data_offset and starts storing the reshaped stripes (with new raid
layout and/or new stripesize and/or new number of stripes) relative
to new_data_offset. This is to avoid writing over any data in place
which is non-atomic by nature and thus be recoverable without data loss
in the transition. MD uses the term out-of-place reshaping for it.
There's 2 other areas we don't have report capability for:
- number of data stripes vs. total stripes
(e.g. raid6 with 7 stripes toal has 5 data stripes)
- number of (rotating) parity/syndrome chunks
(e.g. raid6 with 7 stripes toal has 2 parity chunks; one
per stripe for P-Syndrome and another one for Q-Syndrome)
Thus, add the following reportable keys:
- reshape_len (in current units)
- reshape_len_le (in logical extents)
- data_offset (in sectors)
- new_data_offset ( " )
- data_stripes
- parity_chunks
Enhance lvchange-raid.sh, lvconvert-raid-reshape-linear_to_striped.sh,
lvconvert-raid-reshape-striped_to_linear.sh, lvconvert-raid-reshape.sh
and lvconvert-raid-takeover.sh to make use of new keys.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Recently added check for reshaping in this function called for
a cleanup to avoid proliferating it with more explicit conditionals.
Base the reshaping check on the given _features array.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
An initialization was missing when converting striped to raid0(_meta)
causing unitialized reshape_len in the new component LVs first segment.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The imposed minimum region size can cause rejection on
disk removing reshapes. Lower it to avoid that.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Commit 27384c52cf lowered the maximum number of devices
back to 64 for compatibility.
Because more members have been added to the API in
'struct dm_tree_node_raid_params *', we have to version
the public libdm RAID API to not break any existing users.
Changes:
- keep the previous 'struct dm_tree_node_raid_params' and
dm_tree_node_add_raid_target_with_params()/dm_tree_node_add_raid_target()
in order to expose the already released public RAID API
- introduce 'struct dm_tree_node_raid_params_v2' and additional functions
dm_tree_node_add_raid_target_with_params_v2()/dm_tree_node_add_raid_target_v2()
to be used by the new lvm2 lib reshape extentions
With this new API, the bitfields for rebuild/writemostly legs in
'struct dm_tree_node_raid_params_v2' can be raised to 256 bits
again (253 legs maximum supported in MD kernel).
Mind that we can limit the maximum usable number via the
DEFAULT_RAID{1}_MAX_IMAGES definition in defaults.h.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
When requesting a regionsize change during conversions, check
for constraints or the command may fail in the kernel n case
the region size is too smalle or too large thus leaving any
new SubLVs behind.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Allow regionsize on upconvert from linear:
fix related commit 2574d3257a to actually work
Related: rhbz1394427
Remove setting raid5_n on conversions from raid1
as of commit 932db3db53 because any raid5 mapping
may be requested.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Because of contraints in renaming shifted rimage/rmeta LV names
the current RaidLV limit is a maximum of 10 SubLV pairs.
With the previous introduction of reshaping infratructure that
constriant got removed.
Kernel supports 253 since dm-raid target 1.9.0, older kernels 64.
Raise the maximum number of RaidLV rimage/rmeta pairs to 64.
If we want to raise past 64, we have to introdce a check for
the kernel supporting it in lvcreate/lvconvert.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces the changes to call the reshaping infratructure
from lv_raid_convert().
Changes:
- add reshaping calls from lv_raid_convert()
- add command definitons for reshaping to tools/command-lines.in
- fix raid_rimage_extents()
- add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh
and lvconvert-raid-reshape-striped_to_linear.sh to test
the linear <-> striped multi-step conversions
- add lvconvert-raid-reshape.sh reshaping tests
- enhance lvconvert-raid-takeover.sh with new raid10 tests
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Change:
- allow raid_rimage_extents() to calculate raid10
- remove an __unused__ attribute
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Change:
- add missing raid1 <-> raid5 conversions to support
linear <-> raid5 <-> raid0(_meta)/striped conversions
- rename related new takeover functions to
_takeover_from_raid1_to_raid5 and _takeover_from_raid5_to_raid1,
because a reshape to > 2 legs is only possible with
raid5 layout
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Change:
- enhance _clear_meta_lvs() to support raid0 allowing
raid0_meta -> raid10 conversions to succeed by clearing
the raid0 rmeta images or the kernel will fail because
of discovering reordered raid devices
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- enhance _raid45610_to_raid0_or_striped_wrapper() to support
raid5_n with 2 areas to raid1 conversion to allow for
striped/raid0(_meta)/raid4/5/6 -> raid1/linear conversions;
rename it to _takeover_downconvert_wrapper to discontinue the
illegible function name
- enhance _striped_or_raid0_to_raid45610_wrapper() to support
raid1 with 2 areas to raid5* conversions to allow for
linear/raid1 -> striped/raid0(_meta)/raid4/5/6 conversions;
rename it to _takeover_upconvert_wrapper for the same reason
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add missing possible reshape conversions and conversion options
to allow/prohibit changing stripesize or number fo stripes
- enhance setting convenient riad types in reshape conversions
(e.g. raid1 with 2 legs -> radi5_n)
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add _raid_reshape() using the pre/post callbacks and
the stripes add/remove reshape functions introduced before
- and _reshape_requested function checking if a reshape
was requested
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add vg metadata update functions
- add pre and post activation callback functions for
proper sequencing of sub lv activations during reshaping
- move and enhance _lv_update_reload_fns_reset_eliminate_lvs()
to support pre and post activation callbacks
- add _reset_flags_passed_to_kernel() which resets anyxi
rebuild/reshape flags after they have been passed into the kernel
and sets the SubLV remove after reshape flags on legs to be removed
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add function to support disk adding reshapes
- add function to support disk removing reshapes
- add function to support layout (e.g. raid5ls -> raid5_rs)
or stripesize reshaping
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add function providing state of a reshaped RaidLV
- add function to adjust the size of a RaidLV was
reshaped to add/remove stripes
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add lv_raid_data_copies returning raid type specific number;
needed for raid10 with more than 2 data copies
- remove _shift_and_rename_image_components() constraint
to support more than 10 raid legs
- add function to calculate total rimage length used by out-of-place
reshape space allocation
- add out-of-place reshape space alloc/relocate/free functions
- move _data_rimages_count() used by reshape space alloc/realocate functions
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces local infrastructure to raid_manip.c
used by followup patches.
Add functions:
- to check reshaping is supported in target attibute
- to return device health string needed to check
the raid device is ready to reshape
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces infrastructure prerequisites to be used
by raid_manip.c extensions in followup patches.
This base is needed for allocation of out-of-place
reshape space required by the MD raid personalities to
avoid writing over data in-place when reading off the
current RAID layout or number of legs and writing out
the new layout or to a different number of legs
(i.e. restripe)
Changes:
- add members reshape_len to 'struct lv_segment' to store
out-of-place reshape length per component rimage
- add member data_copies to struct lv_segment
to support more than 2 raid10 data copies
- make alloc_lv_segment() aware of both reshape_len and data_copies
- adjust all alloc_lv_segment() callers to the new API
- add functions to retrieve the current data offset (needed for
out-of-place reshaping space allocation) and the devices count
from the kernel
- make libdm deptree code aware of reshape_len
- add LV flags for disk add/remove reshaping
- support import/export of the new 'struct lv_segment' members
- enhance lv_extend/_lv_reduce to cope with reshape_len
- add seg_is_*/segtype_is_* macros related to reshaping
- add target version check for reshaping
- grow rebuilds/writemostly bitmaps to 246 bit to support kernel maximal
- enhance libdm deptree code to support data_offset (out-of-place reshaping)
and delta_disk (legs add/remove reshaping) target arguments
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
The MD kernel raid1 personality does no use any writemostly leg as the primary.
In case a previous linear LV holding data gets upconverted to
raid1 it becomes the primary leg of the new raid1 LV and a full
resynchronization is started to update the new legs.
No writemostly and/or writebehind setting may be allowed during
this initial, full synchronization period of this new raid1 LV
(using the lvchange(8) command), because that would change the
primary (i.e the previous linear LV) thus causing data loss.
lvchange has a bug not preventing this scenario.
Fix rejects setting writemostly and/or writebehind on resychronizing raid1 LVs.
Once we have status in the lvm2 metadata about the linear -> raid upconversion,
we may relax this constraint for other types of resynchronization
(e.g. for user requested "lvchange --resync ").
New lvchange-raid1-writemostly.sh test is added to the test suite.
Resolves: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=855895
Previously when lvremove tried to remove 'active' origin,
it had been asking for every 'snapshot' LV separately
and doing individual single snapshot removals first.
To be faster it now deactivates origin before removal
all connected snapshots.
This avoids multiple reloads of dm table for origin volume
which were unnecessary as origin was meant to be removed as well.
Change run time access to the command_name struct
cmd->cname instead of indirectly through
cmd->command->cname. This removes the two run time
fields from struct command.
. Define a prototype for every lvm command.
. Match every user command with one definition.
. Generate help text and man pages from them.
The new file command-lines.in defines a prototype for every
unique lvm command. A unique lvm command is a unique
combination of: command name + required option args +
required positional args. Each of these prototypes also
includes the optional option args and optional positional
args that the command will accept, a description, and a
unique string ID for the definition. Any valid command
will match one of the prototypes.
Here's an example of the lvresize command definitions from
command-lines.in, there are three unique lvresize commands:
lvresize --size SizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat String, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize SizeMB
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.
lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --resizefs, --stripes Number, --stripesize SizeKB
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.
FLAGS: SECONDARY_SYNTAX
lvresize --poolmetadatasize SizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat String, --stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.
The three commands have separate definitions because they have
different required parameters. Required parameters are specified
on the first line of the definition. Optional options are
listed after OO, and optional positional args are listed after OP.
This data is used to generate corresponding command definition
structures for lvm in command-lines.h. usage/help output is also
auto generated, so it is always in sync with the definitions.
Every user-entered command is compared against the set of
command structures, and matched with one. An error is
reported if an entered command does not have the required
parameters for any definition. The closest match is printed
as a suggestion, and running lvresize --help will display
the usage for each possible lvresize command.
The prototype syntax used for help/man output includes
required --option and positional args on the first line,
and optional --option and positional args enclosed in [ ]
on subsequent lines.
command_name <required_opt_args> <required_pos_args>
[ <optional_opt_args> ]
[ <optional_pos_args> ]
Command definitions that are not to be advertised/suggested
have the flag SECONDARY_SYNTAX. These commands will not be
printed in the normal help output.
Man page prototypes are also generated from the same original
command definitions, and are always in sync with the code
and help text.
Very early in command execution, a matching command definition
is found. lvm then knows the operation being done, and that
the provided args conform to the definition. This will allow
lots of ad hoc checking/validation to be removed throughout
the code.
Each command definition can also be routed to a specific
function to implement it. The function is associated with
an enum value for the command definition (generated from
the ID string.) These per-command-definition implementation
functions have not yet been created, so all commands
currently fall back to the existing per-command-name
implementation functions.
Using per-command-definition functions will allow lots of
code to be removed which tries to figure out what the
command is meant to do. This is currently based on ad hoc
and complicated option analysis. When using the new
functions, what the command is doing is already known
from the associated command definition.
Remove allocate_pvs from raid_manip.c:_region_size_change_request() API
and lv_extend() using it added for temporary test purpose.
Related: rhbz1366296
Add:
- region size checks to raid_manip.c types array and supporting functions
- tests to lvconvert-raid-takeover.sh to check bogus
"lvconvert --type --regionsize N " requests
Related: rhbz1366296
Add:
- conversion support from striped/raid0/raid0_meta to/from raid10;
raid10 goes by the near format (same as used in creation of
raid10 LVs), which groups data copies together with their original
blocks (e.g. 3-way striped, 2 data copies resulting in 112233 in the
first stripe followed by 445566 in the second etc.) and is limited
to even numbers of legs for now
- related tests to lvconvert-raid-takeover.sh
- typo
Related: rhbz1366296
- support shrinking of raid0/1/4/5/6/10 LVs
- enhance lvresize-raid.sh tests: add raid0* and raid10
- fix have_raid4 in aux.sh to allow lv_resize-raid.sh
and other scripts to test raid4
Resolves: rhbz1394048
Commit cfb6ef654d introduced
support to change RAID region size.
Fix:
- don't change region_size until after prompting the user
- use log_print_unless_silent() instead of log_warn()
- avoid superfluous sigint() calls which are already
covered in yes_no_prompt()
- typo
Related: rhbz1392947
Commit cfb6ef654d introduced
support to change RAID region size.
Add:
- missing conditions to support any types to function with
it in lv_raid_convert(); temporary workaround used until
cli validation patches get merged
- tests requesting "-R " to lvconvert-raid-takeover.sh
involving a cleanup of the script
Related: rhbz1392947
Cleanups as of Jons review:
- enhance comment about mandatory raid4 <-> raid5_n activation w/o metadata SubLVs
- remove bogus segment flag setting
- fix to sync related comments on conversions to raid0/striped and amongst raid4/5
- add missing error message for non-synced conversion to raid0/striped
Related: rhbz1366296
Add:
- support to change region size of existing RaidLVs
(all RAID LV types but raid0/raid0_meta)
- lvconvert-raid-regionsize.sh with test variations
for different RAID types and region sizes
Resolves: rhbz1392947
Add:
- support for segment types raid6_{ls,rs,la,ra}_6
(striped raid with dedicated last Q-Syndrome SubLVs)
- conversion support from raid5_{ls,rs,la,ra} to/from raid6_{ls,rs,la,ra}_6
- setting convenient segtypes on conversions from/to raid4/5/6
- related tests to lvconvert-raid-takeover.sh factoring
out _lvcreate,_lvconvert funxtions
Related: rhbz1366296
Add:
- support for segment type raid6_n_6 (striped raid with dedicated last parity/Q-Syndrome SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid6_n_6
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
Add:
- support for segment type raid5_n (striped raid with dedicated last parity SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid5_n
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
When showing sizes with 'H|human' units we do use standard rounding.
This however is confusing users from time to time,
when the printed number uses some biger units i.e. GiB and there is just
tiny fraction of space missing.
So here is some real-life example with new 'r' unit.
$lvs
LV VG Attr LSize Pool Origin
lvol0 vg -wi-a----- 1.99g
lvol1 vg -wi-a----- <2.00g
lvol2 vg -wi-a----- <2.01g
Meaning is - lvol1 has 'slightly' less then 2.00g - from sign '<' user
can be aware the LV doesn't have full 2.00GiB in size so he
will be less surpriced allocation of 2G volume will not succeed.
$ vgs
VG #PV #LV #SN Attr VSize VFree
vg 2 2 0 wz--n- <6,00g <2,01g
For uses needing 'old' undecorated human unit simply will continue
to use 'H|h' units.
The new R|r may further change when we would recongnize some
other way how to improve readability.
With recent commit d6a74025df using
INTERNAL_ERROR while cheking layer LV - it's been noticed mirror
logic currently doesn't do a correct thing during upconversion and
does a full-try instead of checking only allocator capabilities.
This leads to invalid usage of layer.
To keep existing code running before providing a fix, relax
INTERNAL_ERROR just an error and keep the 'code' running.
Once mirror code is fixed, these all check should be switched
to internal errors.
Show proper internal error for failing command when there are some
inconsitencies in sizes of LV and its layer instead of rather
meaningless error code 5.
(Could be hit i.e. if user tried to 'resize' cached LV and then
uncache such LV.)
During rework of resize code this validation check
has been lost (in my resize branch). Upstream
is still not supporting resize of any cache type LV
so needs to be prevented.
When we need to clear dirty cache content of cached LV, there
is table reload which usually is shortly followed by next metadata
change. However udev can't (as of now) process udev event
while device is 'suspended'.
So whenever sequence of 'suspend/resume/suspend' is needed,
we need to wait first for finishing of 'resume' processing before
starting next 'suspend'. Otherwise there is 'race' danger of triggering
unwantend umount by systemd as such event will trigger
SYSTEMD_READY=0 state for a moment for such changed device.
Such race is pretty ugly to trace so we may need to review more
sequencies for missing 'sync'.
(Other option is to enhnace 'udev' rules processing to avoid
such dramatic actions to be happening for suspended devices).
Add to commits 87117c2b25 and 0b8bf73a63 to avoid refreshing two
times altogether, thus avoiding issues related to clustered, remotely
activated RaidLV. Avoid need to repeat "lvchange --refresh RaidLV"
two times as a workaround to refresh a RaidLV. Fix handles removal
of temporary *-missing-* devices created for any missing segments
in RAID SubLVs during activation.
Because the kernel dm-raid target isn't able to handle transiently
failing devices properly we need
"[dm-devel][PATCH] dm raid: fix transient device failure processing"
as well.
test: add lvchange-raid-transient-failures.sh
and enhance lvconvert-raid.sh
Resolves: rhbz1025322
Related: rhbz1265191
Related: rhbz1399844
Related: rhbz1404425
Move individual segment validation to a separate function
executed for 'complete_vg'.
Move some 'extra' validation bits from 'raid' validation to global
segtype validation (so extending existing normal validation)
TODO: still some test are left to be moved.
Reduce some duplication in validation process - there are still
some left thought so still room for improving overal speed.
It could be actually better to use even cache origin in
read-only mode so there could no be some 'acidental'
change being done on this volume.
This however need further tools enhancment - where we would need
to handle whole subtree on 'lvchange -pr/-prw'.
When command calls backup() more then once (which is actually not
wanted) this warning message is shown repeatedly:
"WARNING: This metadata update is NOT backed up."
Instead now print message just once and less confuse user.
Add this functionality to lvconvert:
'lvconvert --thin cachedLV --thinpool vg/poll'
Converts cachedLV to external origin (which will be read-only).
New thin volume is created in thinpool LV and it's using external
origin as source for unprovisioned chunks.
This conversion happens online (while volume is in use).
Thin LV remains fully writable.
Cached external origin no longer could be written so cache will be used
ONLY for read operations. For this limitation we require cache mode
to be writethrough (as writeback cannot write to read-only volumes).
When thinLV is later removed cached external origin is again
fully usable, just note, LV remain in 'read-only' mode.
When read-write is needed, 'lvchange -prw' has to be used.
Single external origin could be user by multiple thinLV in
multiple differen thin pool.
When cache volume may be converted from normal to -real layer LV
we need to improve logic for call cache_check.
With this patch, we register call for cache_check only when metadata LV
is not yet present in active table slot (should match initial table
load).
This avoids unwanted checking when cache would become layer device
online.
External origin could be reloaded via more locks.
It's actually even more complex then thin-pool,
as it may be active on more nodes for linear LVs
(and maybe even more types).
External origin is always read-only thus unmodifiable
device so there should not be a problem accesing it
through multiple nodes.
Also for thin-pool check first presence of active thin-pool.
FIXME:
It's not easy to detect on which nodes this device is active
Thus manipulation with such device may require checking every
node and it active state and refresh.
But since such setup is quite complex to prepare and use,
hopefully there are not user trying to 'explore' this usage yet.
To be ready to show status of cache volume, call the status
with layer. Layer is automatically detected in this case when
cache volume is used in 'layered' form (needs -real suffix).
Avoid printing misleading message about single dirty block.
Instead properly detect condition where the 'cleaner' policy
needs to be installed without 'overloading' dirty variable.
Also print warning if we would be clearing read-only volume.
(it really shouldn't happen).
External origin could be activated as stand-alone device.
When the last thin LV is removed, external origin is no longer
the external origin and it's layer property was dropped.
Ensure dm table is correct by reloading external origin
(when it's active).
When LV is external origin, show info for LV but
status for -layer. So we expose more info to a user
as otherwise active external origin is only linear
mapping of -real layer.
We do the same for i.e. old snaphost origin.
Activation of raid has brough up also splitted image with tracing
(without taking lock for this).
So when raid is now activate - such image is not put into
table (with _rmeta). When user needs such device, just active it.
Commit 0690392040 revealed a problem
in raid metadata manipulation.
We do two operations in one table reload:
- raid leg/image extraction
- rename remaining raid legs
This should be made in separate steps. Otherwise we do an
uncorrectable table change on error path (leaving tables
for admin and dmsetup).
As a hotfix - restore the previous logic and use a single
new function _lv_update_and_reload_list which activates exclusively
extracted LVs on the list before resuming suspended raid LV.
This restore 'rename' functionality upon resume.
Also still preserve the 'origin_only' logic - although we know
it's not working properly for cluster and LV stacking.
Further fixes are needed.
backup is not 'tested' for success and also it should
actually happen just when command is finished.
We do not target to make backups with each inter-step
metadata change.
RAID is LV property
TODO: only 2 flags are seg->status: PVMOVE & MERGING
At least the second one should be soon elimanted as again
we merge LV not a segment.
This is another place for 'common' use pattern or
reload and activation of deleted devices.
(Moving the exclusive activation to _deactivate_and_remove_lvs()).
TODO: looks like halve of raid function is reloading
just 'origin' - and the other full LV.
Add a macro for the clz (count leading zeros) operation.
Use the GCC __builtin_clz() for clz() if it is available and fall
back to a shift based implementation on systems that do not set
HAVE___BUILTIN_CLZ.
Fix order of operation when converting raid1 into old mirror.
Before any later metadata modification are initiated prepare
mirror_log device with all clearing.
Then directly convert raid1 into mirror with mirror_log.
This convertion now properly see as precommitted metadata
new 'mirror' and committed old 'raid' and is able to
preload all LVs.
Simplify info run for use only for INFO & STATUS.
Drop handling MKNODES within _info_run() call
and use more advanced _setup_task_run() directly.
This allows to further simplify _info_run().
Integrate also query for inactive table and
handle dm_task_run() and dm_task_get_info()
(thus switching to setup_task_run)
Add one exception case for DM_DEVICE_TARGET_MSG.
This allows further shortening and simplification of all
other users of this function.
It's actually not needed to call extra lv_has_target_type() to detect
snapshot merge is in progress - decode this right during status
capturing and save even few extra ioctl calls.
Drop LV from passed API arg - it's always segment being checked.
Also use_layer is now in full control of lv_info_with_seg_status().
It decides which device needs to be checked to get 'the most info'.
TODO: future version should be able to expose status from
Start moving selection of status taken for a LV into a single place.
The logic for showing info & status has been spread over multiple
places and were doing too complex decision going agains each other.
Unify selection of status of origin & cow scanned device.
TODO: in future we want to grab status for LV and layered LV and have
both statuses present for display - i.e. when 'old snapshot'
of thinLV is takes and there is ongoing merge - at some moment
we are not capable to show all needed info.
When lvm2 wants to see a status, it needs to validate,
segment for status reading is matching whan lvm2 expects in
metadata.
Also ensure status failure will not cause '0' from info reading
when actual info was collected properly.
Failure in 'status' reading is considered to be
a 'log_warn()' event only.
When we can't parse status, switch to warning as this is not
considered an errornous case. LVS is not supposed to return
error status code when device is not what it's been expected to
be - but it should be WARNING a user there is something unexpected.
Convert lvs -o lv_merge_failed,lv_snapshot_invalid to use
lv_info_and_status function.
This makes it equal to attr value showing this info
(as they were different since they were derived from
different data set and different logic as well).
Also saves couple extra ioctl that were needed to obtain this info.
When displaying <reporting_command> -o help, we'd like to have fields
grouped nicely, not starting having groups interleaved as it was before.
The code that displays the help output for fields takes the order as
written in columns.h file - this caused output like:
$ lvs -o help
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Info and Status Combined Fields
-----------------------------------------------------
...field list...
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Status Fields
-----------------------------------
...field list...
Logical Volume Fields
---------------------
...field list...
Instead, let's have it without groups interleaved which may be
a bit confusing, so:
Logical Volume Fields
---------------------
...field list...
Logical Volume Device Status Fields
-----------------------------------
...field list...
Logical Volume Device Info and Status Combined Fields
-----------------------------------------------------
...field list...
..and so on.
In case any SubLV of a RaidLV transiently fails, it needs
two "lvchange --refresh RaidLV" runs to get it to fully
operational mode again. Reason being, that lvm reloads all
targets for the RaidLV tree but doesn't resume the SubLVs
until after the whole tree has been reloaded in the first
refresh run. Thus the live mapping table of the SubLVs
still point to an "error" mapping and the dm-raid target
can't retrieve any superblock from the MetaLV(s) in processing
the constructor during this preload thus not discovering the
again accessible SubLVs. In the second run, the SubLV targets
map proper (meta)data, hence the constructor discovers those
fine now.
Solve by resuming the SubLVs of the RaidLV before
preloading the respective top-level RaidLV target.
Resolves: rhbz1399844
Avoid code duplication and use exiting commonly used
lv_update_and_reload() function.
There is still one place left where mirror is doing strange
double suspend call - needs there more thinking what's wrong with
that code.
When lvconvert adds a new leg - it's doing it free 'temporary' image
layer - however this temporary 'internal' mirror is also MIRRORED LV.
But the status bit was not properly transfered through layer.
Do not emit warning message but only log debug message if
lvm2-lvmdbusd.service unit is missing and at the same time
we have global/notify_dbus=1 (which is used by default if we
configured sources with "--enable-notify-dbus"). We don't want
hard dependency between LVM2 and lvmdbusd so it's enough to log
only debug message in this case.
Make it easier to replace missing segments with 'zero' returning
target - otherwise user would have to create some extra target
to provide zeros as /dev/zero can't be used (not a block device).
Also break code loop when segment is found and make it an INTERNAL_ERROR
where it's missing.
Instead of clearing multiple rmeta device with sequential activation
process and waiting for udev for every _rmeta device separately,
activate all _rmeta devices first and then clear them and deactivate
afterwards.
Also update some tracing messages.
When anyhing goes wrong during clearing process, always try to
deactivate as much _rmeta devices as possible before fail.
Translate log_info() into log_very_verbose() which is macro
supposed to be used by our code.
log_info() is internal macro with eventually some 'symbolic' meaning
in syslogging daemons.
Introduce macros:
log_level(), log_stderr(), log_once(), log_bypass_report()
For easier and more consisten way how to 'decoder' bits
of info from passed 'level'.
This patch fixes potential problem when 'level' of message
might not have always masked right bits.
(Automatic) repair may not be allowed during the initial sync of an upconverted
linear LV, because the data on the failing, primary leg hasn't been completely
synchronized to the N-1 other legs of the raid1 LV (replacing failed legs during
repair involves discontinuing access to any replaced legs data, thus preventing
data recovery on the primary leg e.g. via dd_rescue).
Even though repair would not cause data loss when adding legs to a fully synced
raid1 LV, we don't have information yet defining this state yet (e.g. a raid1
LV flag telling the fully synchronized status before any legs were added),
hence can't automatically decide to allow to repair.
If nonetheless a repair on a non-synced raid1 LVs is intended, the "--force"
option has to be provided.
Resolves: rhbz1311765
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.
Add related tests to lvconvert-raid-takeover.sh
Resolves: rhbz1388962
On conversions between striped/raid0* and raid4, the kernel expects
the dedicated raid4 parity SubLVs in the first segment area rather than
in the last it's been allocated to, thus the data mapping ain't proper.
Enhance lvconvert (lib/metadata/raid_manip.c) to shift the dedicated
parity SubLVs on conversions from striped/raid0* to raid4 and vice-versa.
In case of raid0_meta -> raid4 where the MD raid0 personality already has
stored RAID array device positions in the superblocks, the MetaLVs have to
be cleared so that the kernel doesn't fail validating the array positions
after lvm has shifted them up by one.
Add more tests to lvconvert-raid-takeover.sh including one to check for
mapping flaws by converting a created raid4 with filesystem -> striped
and fsck it.
Whilst on it:
- add missing direct striped -> raid4 conversion to the takeover array
to avoid an intermim conversion from striped -> raid0*
- clean up the takeover array
- allow lvconvert to actually call lv_raid_convert() on all takeover requests
in order to check parameters and display messages provided by takeover
functions rather than just "...not supported" from within lvconvert
- fix a typo
Resolves: rhbz1386148
Works if the pool is inactive.
Activation code doesn't notice a new raid dependency in on-disk metadata
when a thin LV is already active.
https://bugzilla.redhat.com/1365286
We added lightweight toolcontext handle to avoid useless initialization
of some parts of the context and also to avoid problems when using the
handle very soon at system boot, like in lvm2-activation-generator
through lvm2app interface. However, we missed reading all the other
config sources like lvmlocal.conf as well as any tag config - we need to
read these too to get the final config value which may be overriden in
any of these additional config sources.
Currently, we use this lightweight toolcontext handle to read
global/use_lvmetad and global/use_lvmpolld config values in
lvm2-activation-generator using lvm2app interface (lvm_config_find_bool
lvm2app function).
The dm-raid target now rejects device rebuild requests during ongoing
resynchronization thus causing 'lvconvert --repair ...' to fail with
a kernel error message. This regresses with respect to failing automatic
repair via the dmeventd RAID plugin in case raid_fault_policy="allocate"
is configured in lvm.conf as well.
Previously allowing such repair request required cancelling the
resynchronization of any still accessible DataLVs, hence reasoning
potential data loss.
Patch allows the resynchronization of still accessible DataLVs to
finish up by rejecting any 'lvconvert --repair ...'.
It enhances the dmeventd RAID plugin to be able to automatically repair
by postponing the repair after synchronization ended.
More tests are added to lvconvert-rebuild-raid.sh to cover single
and multiple DataLV failure cases for the different RAID levels.
- resolves: rhbz1371717
Commit 199697accf rerouted funtion
for priting cache volume origin to lvm2app app function - which
however had a bug. So restore the original functionality
and print correct LV as cache origin LV.
Unconditionally guard there is at least 1/4 of metadata volume
free (<16Mib) or 4MiB - whichever value is smaller.
In case there is not enough free space do not let operation proceed and
recommend thin-pool metadata resize (in case user has not
enabled autoresize, manual 'lvextend --poolmetadatasize' is needed).
In the case there is no active thin volume, report thin pool
as lock holder. This fixed function like lvextend
which either expecte lock holder LV is some active thin
or 'possibly' inactive thin pool.
The existing code doesn't understand that mirror logs should cling to
parallel LVs (like extending them) instead of avoiding them.
As a quick workaround to avoid lvcreate failures, hard-code
--alloc normal for mirror logs even if the rest of the allocation
used a stricter policy.
https://bugzilla.redhat.com/show_bug.cgi?id=1376532
When rescanning a VG from disk, the metadata read from
each PV was compared as a sanity check. The comparison
is done by exporting the vg metadata from each dev to
a config tree, and then comparing the config trees.
The function to create the config tree inserts
extraneous information along with the actual VG metadata.
This extra info includes creation_time. The config
trees for two devs can easily be created one second
apart in which case the different creation_times would
cause the metadata comparison to fail. The fix is to
exclude the extraneous info from the metadata comparison.
