Tidy up for another release: updated documentation; removed old files;

module build fix.

.gitignore

@@ -1,32 +0,0 @@
-*.5
-*.7
-*.8
-*.a
-*.d
-*.o
-*.orig
-*.pc
-*.pot
-*.pyc
-*.pyo
-*.rej
-*.so
-*.so.*
-*.sw*
-*~
-
-.export.sym
-.exported_symbols_generated
-.gdb_history
-
-Makefile
-make.tmpl
-
-/autom4te.cache/
-/autoscan.log
-/config.log
-/config.status
-/configure.scan
-/cscope.out
-/tags
-/tmp/

BUGS

@@ -0,0 +1,2 @@
+Snapshots under 2.4.18 can deadlock due to a bug in the VM system.
+2.4.19-pre8 is fine.

COPYING

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -305,7 +305,7 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 
 Also add information on how to contact you by electronic and paper mail.

COPYING.LIB

@@ -1,14 +1,14 @@
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
 
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+		  GNU LIBRARY GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1991 Free Software Foundation, Inc.
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
+[This is the first released version of the library GPL.  It is
+ numbered 2 because it goes with version 2 of the ordinary GPL.]
 
 			    Preamble
 
@@ -17,109 +17,97 @@ freedom to share and change it.  By contrast, the GNU General Public
 Licenses are intended to guarantee your freedom to share and change
 free software--to make sure the software is free for all its users.
 
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
+  This license, the Library General Public License, applies to some
+specially designated Free Software Foundation software, and to any
+other libraries whose authors decide to use it.  You can use it for
+your libraries, too.
 
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
 
   To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if
+you distribute copies of the library, or if you modify it.
 
   For example, if you distribute copies of the library, whether gratis
 or for a fee, you must give the recipients all the rights that we gave
 you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
+code.  If you link a program with the library, you must provide
+complete object files to the recipients so that they can relink them
+with the library, after making changes to the library and recompiling
 it.  And you must show them these terms so they know their rights.
 
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
+  Our method of protecting your rights has two steps: (1) copyright
+the library, and (2) offer you this license which gives you legal
 permission to copy, distribute and/or modify the library.
 
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
+  Also, for each distributor's protection, we want to make certain
+that everyone understands that there is no warranty for this free
+library.  If the library is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original
+version, so that any problems introduced by others will not reflect on
+the original authors' reputations.
 
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that companies distributing free
+software will individually obtain patent licenses, thus in effect
+transforming the program into proprietary software.  To prevent this,
+we have made it clear that any patent must be licensed for everyone's
+free use or not licensed at all.
 
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
+  Most GNU software, including some libraries, is covered by the ordinary
+GNU General Public License, which was designed for utility programs.  This
+license, the GNU Library General Public License, applies to certain
+designated libraries.  This license is quite different from the ordinary
+one; be sure to read it in full, and don't assume that anything in it is
+the same as in the ordinary license.
 
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
+  The reason we have a separate public license for some libraries is that
+they blur the distinction we usually make between modifying or adding to a
+program and simply using it.  Linking a program with a library, without
+changing the library, is in some sense simply using the library, and is
+analogous to running a utility program or application program.  However, in
+a textual and legal sense, the linked executable is a combined work, a
+derivative of the original library, and the ordinary General Public License
+treats it as such.
 
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
+  Because of this blurred distinction, using the ordinary General
+Public License for libraries did not effectively promote software
+sharing, because most developers did not use the libraries.  We
+concluded that weaker conditions might promote sharing better.
 
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
+  However, unrestricted linking of non-free programs would deprive the
+users of those programs of all benefit from the free status of the
+libraries themselves.  This Library General Public License is intended to
+permit developers of non-free programs to use free libraries, while
+preserving your freedom as a user of such programs to change the free
+libraries that are incorporated in them.  (We have not seen how to achieve
+this as regards changes in header files, but we have achieved it as regards
+changes in the actual functions of the Library.)  The hope is that this
+will lead to faster development of free libraries.
 
   The precise terms and conditions for copying, distribution and
 modification follow.  Pay close attention to the difference between a
 "work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
+former contains code derived from the library, while the latter only
+works together with the library.
+
+  Note that it is possible for a library to be covered by the ordinary
+General Public License rather than by this special one.
 
-		  GNU LESSER GENERAL PUBLIC LICENSE
+		  GNU LIBRARY GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
+  0. This License Agreement applies to any software library which
+contains a notice placed by the copyright holder or other authorized
+party saying it may be distributed under the terms of this Library
+General Public License (also called "this License").  Each licensee is
+addressed as "you".
 
   A "library" means a collection of software functions and/or data
 prepared so as to be conveniently linked with application programs
@@ -268,7 +256,7 @@ distribute the object code for the work under the terms of Section 6.
 Any executables containing that work also fall under Section 6,
 whether or not they are linked directly with the Library itself.
 
-  6. As an exception to the Sections above, you may also combine or
+  6. As an exception to the Sections above, you may also compile or
 link a "work that uses the Library" with the Library to produce a
 work containing portions of the Library, and distribute that work
 under terms of your choice, provided that the terms permit
@@ -295,31 +283,23 @@ of these things:
     Library will not necessarily be able to recompile the application
     to use the modified definitions.)
 
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
+    b) Accompany the work with a written offer, valid for at
     least three years, to give the same user the materials
     specified in Subsection 6a, above, for a charge no more
     than the cost of performing this distribution.
 
-    d) If distribution of the work is made by offering access to copy
+    c) If distribution of the work is made by offering access to copy
     from a designated place, offer equivalent access to copy the above
     specified materials from the same place.
 
-    e) Verify that the user has already received a copy of these
+    d) Verify that the user has already received a copy of these
     materials or that you have already sent this user a copy.
 
   For an executable, the required form of the "work that uses the
 Library" must include any data and utility programs needed for
 reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
+the source code distributed need not include anything that is normally
+distributed (in either source or binary form) with the major
 components (compiler, kernel, and so on) of the operating system on
 which the executable runs, unless that component itself accompanies
 the executable.
@@ -368,7 +348,7 @@ Library), the recipient automatically receives a license from the
 original licensor to copy, distribute, link with or modify the Library
 subject to these terms and conditions.  You may not impose any further
 restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
+You are not responsible for enforcing compliance by third parties to
 this License.
 
   11. If, as a consequence of a court judgment or allegation of patent
@@ -411,7 +391,7 @@ excluded.  In such case, this License incorporates the limitation as if
 written in the body of this License.
 
   13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
+versions of the Library General Public License from time to time.
 Such new versions will be similar in spirit to the present version,
 but may differ in detail to address new problems or concerns.
 
@@ -457,7 +437,7 @@ DAMAGES.
 
 		     END OF TERMS AND CONDITIONS
 
-           How to Apply These Terms to Your New Libraries
+     Appendix: How to Apply These Terms to Your New Libraries
 
   If you develop a new library, and you want it to be of the greatest
 possible use to the public, we recommend making it free software that
@@ -474,18 +454,19 @@ convey the exclusion of warranty; and each file should have at least the
     Copyright (C) <year>  <name of author>
 
     This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
+    modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
+    version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
+    Library General Public License for more details.
 
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+    MA 02111-1307, USA
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -500,5 +481,3 @@ necessary.  Here is a sample; alter the names:
   Ty Coon, President of Vice
 
 That's all there is to it!
-
-

INSTALL

@@ -1,31 +1,36 @@
-Installation
-============
+LVM2 installation
+=================
 
-1) Generate custom makefiles.
+1) Install device-mapper
+
+   Ensure the device-mapper has been installed on the machine.
+
+   The device-mapper should be in the kernel (look for 'device-mapper'
+   messages in the kernel logs) and /usr/include/libdevmapper.h should 
+   be present.
+
+   The device-mapper is available from:
+     ftp://ftp.sistina.com/pub/LVM2/device-mapper/
+
+
+2) Generate custom makefiles.
 
    Run the 'configure' script from the top directory.
 
-   If you don't want to include the LVM1 backwards-compatibility code use:
-     ./configure --with-lvm1=none 
+   If you do not have GNU readline (http://www.gnu.org/directory/readline.html)
+   installed use
+     ./configure --disable-readline
 
-   To separate the LVM1 support into a shared library loaded by lvm.conf use:
-     ./configure --with-lvm1=shared
 
-   Use ./configure --help to see other options.
+3) Build and install LVM2.
 
-2) Build and install.
+   Run 'make install' from the top directory.
 
-   Run 'make' from the top directory to build everything you configured.
-   Run 'make install' to build and install everything you configured.
 
-   If you only want the device-mapper libraries and tools use
-   'make device-mapper' or 'make install_device-mapper'.
-
-3) If using LVM2, create a configuration file.
+4) Create a configuration file
 
    The tools will work fine without a configuration file being
    present, but you ought to review the example file in doc/example.conf.
-
-Please also refer to the WHATS_NEW file and the manual pages for the 
-individual commands.
+   For example, specifying the devices that LVM2 is to use should
+   make the tools run more efficiently - and avoid scanning /dev/cdrom!
 

INTRO

@@ -0,0 +1,18 @@
+An introduction to LVM2
+=======================
+
+Background
+
+
+Compatibility with LVM1
+
+
+New features
+
+
+Missing features
+
+
+Future enhancements
+
+

Makefile.in

@@ -1,243 +1,34 @@
 #
-# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
-# Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
+# Copyright (C) 2001 Sistina Software
 #
-# This file is part of LVM2.
+# This LVM library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later version.
 #
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
+# This LVM library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
 #
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+# You should have received a copy of the GNU Library General Public
+# License along with this LVM library; if not, write to the Free
+# Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+# MA 02111-1307, USA
 
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
+VPATH = @srcdir@
 
-SUBDIRS = conf daemons include lib libdaemon libdm man scripts tools
+SUBDIRS = include man lib tools
 
-ifeq ("@UDEV_RULES@", "yes")
-  SUBDIRS += udev
-endif
-
-ifeq ("@INTL@", "yes")
-  SUBDIRS += po
-endif
-
-ifeq ("@APPLIB@", "yes")
-  SUBDIRS += liblvm
-endif
-
-ifeq ("@PYTHON_BINDINGS@", "yes")
-  SUBDIRS += python
-endif
-
-ifeq ($(MAKECMDGOALS),clean)
-  SUBDIRS += test
-endif
-# FIXME Should use intermediate Makefiles here!
 ifeq ($(MAKECMDGOALS),distclean)
-  SUBDIRS = conf include man test scripts \
-    libdaemon lib tools daemons libdm \
-    udev po liblvm python \
-    unit-tests/datastruct unit-tests/mm unit-tests/regex
-tools.distclean: test.distclean
+  SUBDIRS += test/mm test/device test/format1 test/regex test/filters
 endif
-DISTCLEAN_DIRS += lcov_reports*
-DISTCLEAN_TARGETS += config.cache config.log config.status make.tmpl
 
 include make.tmpl
 
-libdm: include
-libdaemon: include
-lib: libdm libdaemon
-liblvm: lib
-daemons: lib libdaemon tools
-tools: lib libdaemon device-mapper
-po: tools daemons
-scripts: liblvm libdm
+lib: include
+tools: include lib
 
-lib.device-mapper: include.device-mapper
-libdm.device-mapper: include.device-mapper
-liblvm.device-mapper: include.device-mapper
-daemons.device-mapper: libdm.device-mapper
-tools.device-mapper: libdm.device-mapper
-scripts.device-mapper: include.device-mapper
-device-mapper: tools.device-mapper daemons.device-mapper man.device-mapper
 
-ifeq ("@INTL@", "yes")
-lib.pofile: include.pofile
-tools.pofile: lib.pofile
-daemons.pofile: lib.pofile
-po.pofile: tools.pofile daemons.pofile
-pofile: po.pofile
-endif
-
-ifeq ("@PYTHON_BINDINGS@", "yes")
-python: liblvm
-endif
-
-ifneq ("$(CFLOW_CMD)", "")
-tools.cflow: libdm.cflow lib.cflow
-daemons.cflow: tools.cflow
-cflow: include.cflow
-endif
-
-ifneq ("@CSCOPE_CMD@", "")
-cscope.out:
-	@CSCOPE_CMD@ -b -R -s$(top_srcdir)
-all: cscope.out
-endif
-DISTCLEAN_TARGETS += cscope.out
-CLEAN_DIRS += autom4te.cache
-
-check check_system check_cluster check_local check_lvmetad check_lvmpolld check_lvmlockd_test check_lvmlockd_dlm check_lvmlockd_sanlock unit: all
-	$(MAKE) -C test $(@)
-
-conf.generate: tools
-
-# how to use parenthesis in makefiles
-leftparen:=(
-LVM_VER := $(firstword $(subst $(leftparen), ,$(LVM_VERSION)))
-VER := LVM2.$(LVM_VER)
-# release file name
-FILE_VER := $(VER).tgz
-CLEAN_TARGETS += $(FILE_VER)
-CLEAN_DIRS += $(rpmbuilddir)
-
-dist:
-	@echo "Generating $(FILE_VER)";\
-	(cd $(top_srcdir); git ls-tree -r HEAD --name-only | xargs tar --transform "s,^,$(VER)/," -c) | gzip >$(FILE_VER)
-
-rpm: dist
-	$(RM) -r $(rpmbuilddir)/SOURCES
-	$(MKDIR_P) $(rpmbuilddir)/SOURCES
-	$(LN_S) -f $(abs_top_builddir)/$(FILE_VER) $(rpmbuilddir)/SOURCES
-	$(LN_S) -f $(abs_top_srcdir)/spec/build.inc $(rpmbuilddir)/SOURCES
-	$(LN_S) -f $(abs_top_srcdir)/spec/macros.inc $(rpmbuilddir)/SOURCES
-	$(LN_S) -f $(abs_top_srcdir)/spec/packages.inc $(rpmbuilddir)/SOURCES
-	DM_VER=$$(cut -d- -f1 $(top_srcdir)/VERSION_DM);\
-	GIT_VER=$$(cd $(top_srcdir); git describe | cut -d- --output-delimiter=. -f2,3 || echo 0);\
-	sed -e "s,\(device_mapper_version\) [0-9.]*$$,\1 $$DM_VER," \
-	    -e "s,^\(Version:[^0-9%]*\)[0-9.]*$$,\1 $(LVM_VER)," \
-	    -e "s,^\(Release:[^0-9%]*\)[0-9.]\+,\1 $$GIT_VER," \
-	    $(top_srcdir)/spec/source.inc >$(rpmbuilddir)/SOURCES/source.inc
-	rpmbuild -v --define "_topdir $(rpmbuilddir)" -ba $(top_srcdir)/spec/lvm2.spec
-
-generate: conf.generate
-	$(MAKE) -C conf generate
-
-all_man:
-	$(MAKE) -C man all_man
-
-install_system_dirs:
-	$(INSTALL_DIR) $(DESTDIR)$(DEFAULT_SYS_DIR)
-	$(INSTALL_ROOT_DIR) $(DESTDIR)$(DEFAULT_ARCHIVE_DIR)
-	$(INSTALL_ROOT_DIR) $(DESTDIR)$(DEFAULT_BACKUP_DIR)
-	$(INSTALL_ROOT_DIR) $(DESTDIR)$(DEFAULT_CACHE_DIR)
-	$(INSTALL_ROOT_DIR) $(DESTDIR)$(DEFAULT_LOCK_DIR)
-	$(INSTALL_ROOT_DIR) $(DESTDIR)$(DEFAULT_RUN_DIR)
-	$(INSTALL_ROOT_DATA) /dev/null $(DESTDIR)$(DEFAULT_CACHE_DIR)/.cache
-
-install_initscripts: 
-	$(MAKE) -C scripts install_initscripts
-
-install_systemd_generators:
-	$(MAKE) -C scripts install_systemd_generators
-	$(MAKE) -C man install_systemd_generators
-
-install_systemd_units:
-	$(MAKE) -C scripts install_systemd_units
-
-install_all_man:
-	$(MAKE) -C man install_all_man
-
-ifeq ("@PYTHON_BINDINGS@", "yes")
-install_python_bindings:
-	$(MAKE) -C liblvm/python install_python_bindings
-endif
-
-install_tmpfiles_configuration:
-	$(MAKE) -C scripts install_tmpfiles_configuration
-
-LCOV_TRACES = libdm.info lib.info liblvm.info tools.info \
-	libdaemon/client.info libdaemon/server.info \
-	daemons/clvmd.info \
-	daemons/dmeventd.info \
-	daemons/lvmetad.info \
-	daemons/lvmlockd.info \
-	daemons/lvmpolld.info
-
-CLEAN_TARGETS += $(LCOV_TRACES)
-
-ifneq ("$(LCOV)", "")
-.PHONY: lcov-reset lcov lcov-dated $(LCOV_TRACES)
-
-ifeq ($(MAKECMDGOALS),lcov-dated)
-LCOV_REPORTS_DIR := lcov_reports-$(shell date +%Y%m%d%k%M%S)
-lcov-dated: lcov
-else
-LCOV_REPORTS_DIR := lcov_reports
-endif
-
-lcov-reset:
-	$(LCOV) --zerocounters $(addprefix -d , $(basename $(LCOV_TRACES)))
-
-# maybe use subdirs processing to create tracefiles...
-$(LCOV_TRACES):
-	$(LCOV) -b $(basename $@) -d $(basename $@) \
-		--ignore-errors source -c -o - | $(SED) \
-		-e "s/\(dmeventd_lvm.[ch]\)/plugins\/lvm2\/\1/" \
-		-e "s/dmeventd_\(mirror\|snapshot\|thin\|raid\)\.c/plugins\/\1\/dmeventd_\1\.c/" \
-		>$@
-
-ifneq ("$(GENHTML)", "")
-lcov: $(LCOV_TRACES)
-	$(RM) -r $(LCOV_REPORTS_DIR)
-	$(MKDIR_P) $(LCOV_REPORTS_DIR)
-	for i in $(LCOV_TRACES); do \
-		test -s $$i -a $$(wc -w <$$i) -ge 100 && lc="$$lc $$i"; \
-	done; \
-	test -z "$$lc" || $(GENHTML) -p @abs_top_builddir@ \
-		-o $(LCOV_REPORTS_DIR) $$lc
-endif
-
-endif
-
-ifeq ("$(TESTING)", "yes")
-# testing and report generation
-RUBY=ruby1.9 -Ireport-generators/lib -Ireport-generators/test
-
-.PHONY: unit-test ruby-test test-programs
-
-# FIXME: put dependencies on libdm and liblvm
-# FIXME: Should be handled by Makefiles in subdirs, not here at top level.
-test-programs:
-	cd unit-tests/regex && $(MAKE)
-	cd unit-tests/datastruct && $(MAKE)
-	cd unit-tests/mm && $(MAKE)
-
-unit-test: test-programs
-	$(RUBY) report-generators/unit_test.rb $(shell find . -name TESTS)
-	$(RUBY) report-generators/title_page.rb
-
-memcheck: test-programs
-	$(RUBY) report-generators/memcheck.rb $(shell find . -name TESTS)
-	$(RUBY) report-generators/title_page.rb
-
-ruby-test:
-	$(RUBY) report-generators/test/ts.rb
-endif
-
-ifneq ($(shell which ctags),)
-.PHONY: tags
-tags:
-	test -z "$(shell find $(top_srcdir) -type f -name '*.[ch]' -newer tags 2>/dev/null | head -1)" || $(RM) tags
-	test -f tags || find $(top_srcdir) -maxdepth 5 -type f -name '*.[ch]' -exec ctags -a '{}' +
-
-CLEAN_TARGETS += tags
-endif

README

@@ -1,33 +1,25 @@
-This tree contains the LVM2 and device-mapper tools and libraries.
+This directory contains a beta release of LMV2, the new version of 
+the userland LVM tools designed for the new device-mapper for 
+the Linux kernel.
 
-For more information about LVM2 read the changelog in the WHATS_NEW file.
+The device-mapper needs to be installed before compiling these LVM2 tools.
+
+For more information about LVM2 read the INTRO file.
 Installation instructions are in INSTALL.
 
+This is beta-quality software, released for testing purposes only.
 There is no warranty - see COPYING and COPYING.LIB.
 
 Tarballs are available from:
-  ftp://sources.redhat.com/pub/lvm2/
+  ftp://ftp.sistina.com/pub/LVM2/tools/
+  ftp://ftp.sistina.com/pub/LVM2/device-mapper/
 
-The source code is stored in git:
-  http://git.fedorahosted.org/git/lvm2.git
-  git clone git://git.fedorahosted.org/git/lvm2.git
+To access the CVS tree use:
+  cvs -d :pserver:cvs@tech.sistina.com:/data/cvs login
+  CVS password: cvs1
+  cvs -d :pserver:cvs@tech.sistina.com:/data/cvs checkout LVM2
 
-Mailing list for general discussion related to LVM2:
-  linux-lvm@redhat.com
-  Subscribe from https://www.redhat.com/mailman/listinfo/linux-lvm
-
-Mailing lists for LVM2 development, patches and commits:
-  lvm-devel@redhat.com
-  Subscribe from https://www.redhat.com/mailman/listinfo/lvm-devel
-
-  lvm2-commits@lists.fedorahosted.org (Read-only archive of commits)
-  Subscribe from https://fedorahosted.org/mailman/listinfo/lvm2-commits
-
-Mailing list for device-mapper development, including kernel patches
-and multipath-tools:
-  dm-devel@redhat.com
-  Subscribe from https://www.redhat.com/mailman/listinfo/dm-devel
-
-The source code repository used until 7th June 2012 is accessible here:
-  http://sources.redhat.com/cgi-bin/cvsweb.cgi/LVM2/?cvsroot=lvm2.
+Mailing list for discussion/bug reports etc.
+  lvm-devel@sistina.com
+  Subscribe from http://lists.sistina.com/mailman/listinfo/lvm-devel
 

TODO

@@ -0,0 +1,28 @@
+before 2.0
+-----------
+
+vgexport
+vgimport
+snapshots
+pvmove
+device-mapper support for 2.5 kernel series
+review FIXMEs
+extra validation & full consistency checks in format1 with LVM1
+partial activation (aka VG quorum)
+error message review
+locking during metadata changes
+format2 with atomic transactions
+bidirectional format1/format2 migration tool
+persistent minors
+statistics target and tool support
+review tool exit codes for LVM1 compatibility
+
+before 2.1
+----------
+
+e2fsadm
+lvmsadc
+lvmsar
+pvdata
+vgsplit
+vgmknodes

VERSION

@@ -1 +1 @@
-2.02.169(2)-git (2016-11-30)
+1.95.10-cvs (2002-05-31)

VERSION_DM

@@ -1 +0,0 @@
-1.02.138-git (2016-11-30)

acinclude.m4

@@ -1,234 +0,0 @@
-dnl AC_GCC_VERSION
-dnl check for compiler version
-dnl sets COMPILER_VERSION and GCC_VERSION
-
-AC_DEFUN([AC_CC_VERSION],
-[
-    AC_MSG_CHECKING([C compiler version])
-    COMPILER_VERSION=`$CC -v 2>&1 | grep version`
-    case "$COMPILER_VERSION" in
-        *gcc*)
-	   dnl Ok, how to turn $3 into the real $3
-	   GCC_VERSION=`echo $COMPILER_VERSION | \
-	   sed -e 's/[[^ ]]*\ [[^ ]]*\ \([[^ ]]*\)\ .*/\1/'` ;;
-	*) GCC_VERSION=unknown ;;
-    esac
-    AC_MSG_RESULT($GCC_VERSION)
-])
-
-dnl AC_TRY_CCFLAG([CCFLAG], [VAR], [ACTION-IF-WORKS], [ACTION-IF-FAILS])
-dnl check if $CC supports a given flag
-
-AC_DEFUN([AC_TRY_CCFLAG],
-[
-    AC_REQUIRE([AC_PROG_CC])
-    ac_save_CFLAGS=$CFLAGS
-    CFLAGS=$1
-    AC_CACHE_CHECK([whether $CC accepts $1 flag], [ac_cv_flag_$2],
-	[AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
-			   [AS_VAR_SET([ac_cv_flag_$2], [yes])],
-			   [AS_VAR_SET([ac_cv_flag_$2], [no])])])
-    CFLAGS=$ac_save_CFLAGS
-    $2=AS_VAR_GET([ac_cv_flag_$2])
-    if test "$2" = yes; then
-        ifelse([$3], [], [:], [$3])
-    else
-        ifelse([$4], [], [:], [$4])
-    fi
-])
-
-dnl AC_IF_YES([TEST-FOR-YES], [ACTION-IF-TRUE], [ACTION-IF-FALSE])
-dnl AS_IF() abstraction, checks shell variable for 'yes'
-AC_DEFUN([AC_IF_YES], [AS_IF([test $$1 = yes], [$2], [$3])])
-
-dnl AC_TRY_LDFLAGS([LDFLAGS], [VAR], [ACTION-IF-WORKS], [ACTION-IF-FAILS])
-dnl check if $CC supports given ld flags
-
-AC_DEFUN([AC_TRY_LDFLAGS],
-[
-    AC_REQUIRE([AC_PROG_CC])
-    ac_save_LDFLAGS=$LDFLAGS
-    LDFLAGS=$1
-	AC_CACHE_CHECK([whether $CC accepts $1 ld flags], [ac_cv_flag_$2],
-	[AC_LINK_IFELSE([AC_LANG_PROGRAM()],
-			[AS_VAR_SET([ac_cv_flag_$2], [yes])],
-			[AS_VAR_SET([ac_cv_flag_$2], [no])])])
-    LDFLAGS=$ac_save_LDFLAGS
-    $2=AS_VAR_GET([ac_cv_flag_$2])
-    if test "$2" = yes; then
-        ifelse([$3], [], [:], [$3])
-    else
-        ifelse([$4], [], [:], [$4])
-    fi
-])
-
-# ===========================================================================
-#      http://www.gnu.org/software/autoconf-archive/ax_gcc_builtin.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_GCC_BUILTIN(BUILTIN)
-#
-# DESCRIPTION
-#
-#   This macro checks if the compiler supports one of GCC's built-in
-#   functions; many other compilers also provide those same built-ins.
-#
-#   The BUILTIN parameter is the name of the built-in function.
-#
-#   If BUILTIN is supported define HAVE_<BUILTIN>. Keep in mind that since
-#   builtins usually start with two underscores they will be copied over
-#   into the HAVE_<BUILTIN> definition (e.g. HAVE___BUILTIN_EXPECT for
-#   __builtin_expect()).
-#
-#   The macro caches its result in the ax_cv_have_<BUILTIN> variable (e.g.
-#   ax_cv_have___builtin_expect).
-#
-#   The macro currently supports the following built-in functions:
-#
-#    __builtin_assume_aligned
-#    __builtin_bswap16
-#    __builtin_bswap32
-#    __builtin_bswap64
-#    __builtin_choose_expr
-#    __builtin___clear_cache
-#    __builtin_clrsb
-#    __builtin_clrsbl
-#    __builtin_clrsbll
-#    __builtin_clz
-#    __builtin_clzl
-#    __builtin_clzll
-#    __builtin_complex
-#    __builtin_constant_p
-#    __builtin_ctz
-#    __builtin_ctzl
-#    __builtin_ctzll
-#    __builtin_expect
-#    __builtin_ffs
-#    __builtin_ffsl
-#    __builtin_ffsll
-#    __builtin_fpclassify
-#    __builtin_huge_val
-#    __builtin_huge_valf
-#    __builtin_huge_vall
-#    __builtin_inf
-#    __builtin_infd128
-#    __builtin_infd32
-#    __builtin_infd64
-#    __builtin_inff
-#    __builtin_infl
-#    __builtin_isinf_sign
-#    __builtin_nan
-#    __builtin_nand128
-#    __builtin_nand32
-#    __builtin_nand64
-#    __builtin_nanf
-#    __builtin_nanl
-#    __builtin_nans
-#    __builtin_nansf
-#    __builtin_nansl
-#    __builtin_object_size
-#    __builtin_parity
-#    __builtin_parityl
-#    __builtin_parityll
-#    __builtin_popcount
-#    __builtin_popcountl
-#    __builtin_popcountll
-#    __builtin_powi
-#    __builtin_powif
-#    __builtin_powil
-#    __builtin_prefetch
-#    __builtin_trap
-#    __builtin_types_compatible_p
-#    __builtin_unreachable
-#
-#   Unsuppored built-ins will be tested with an empty parameter set and the
-#   result of the check might be wrong or meaningless so use with care.
-#
-# LICENSE
-#
-#   Copyright (c) 2013 Gabriele Svelto <gabriele.svelto@gmail.com>
-#
-#   Copying and distribution of this file, with or without modification, are
-#   permitted in any medium without royalty provided the copyright notice
-#   and this notice are preserved.  This file is offered as-is, without any
-#   warranty.
-
-#serial 3
-
-AC_DEFUN([AX_GCC_BUILTIN], [
-    AS_VAR_PUSHDEF([ac_var], [ax_cv_have_$1])
-
-    AC_CACHE_CHECK([for $1], [ac_var], [
-        AC_LINK_IFELSE([AC_LANG_PROGRAM([], [
-            m4_case([$1],
-                [__builtin_assume_aligned], [$1("", 0)],
-                [__builtin_bswap16], [$1(0)],
-                [__builtin_bswap32], [$1(0)],
-                [__builtin_bswap64], [$1(0)],
-                [__builtin_choose_expr], [$1(0, 0, 0)],
-                [__builtin___clear_cache], [$1("", "")],
-                [__builtin_clrsb], [$1(0)],
-                [__builtin_clrsbl], [$1(0)],
-                [__builtin_clrsbll], [$1(0)],
-                [__builtin_clz], [$1(0)],
-                [__builtin_clzl], [$1(0)],
-                [__builtin_clzll], [$1(0)],
-                [__builtin_complex], [$1(0.0, 0.0)],
-                [__builtin_constant_p], [$1(0)],
-                [__builtin_ctz], [$1(0)],
-                [__builtin_ctzl], [$1(0)],
-                [__builtin_ctzll], [$1(0)],
-                [__builtin_expect], [$1(0, 0)],
-                [__builtin_ffs], [$1(0)],
-                [__builtin_ffsl], [$1(0)],
-                [__builtin_ffsll], [$1(0)],
-                [__builtin_fpclassify], [$1(0, 1, 2, 3, 4, 0.0)],
-                [__builtin_huge_val], [$1()],
-                [__builtin_huge_valf], [$1()],
-                [__builtin_huge_vall], [$1()],
-                [__builtin_inf], [$1()],
-                [__builtin_infd128], [$1()],
-                [__builtin_infd32], [$1()],
-                [__builtin_infd64], [$1()],
-                [__builtin_inff], [$1()],
-                [__builtin_infl], [$1()],
-                [__builtin_isinf_sign], [$1(0.0)],
-                [__builtin_nan], [$1("")],
-                [__builtin_nand128], [$1("")],
-                [__builtin_nand32], [$1("")],
-                [__builtin_nand64], [$1("")],
-                [__builtin_nanf], [$1("")],
-                [__builtin_nanl], [$1("")],
-                [__builtin_nans], [$1("")],
-                [__builtin_nansf], [$1("")],
-                [__builtin_nansl], [$1("")],
-                [__builtin_object_size], [$1("", 0)],
-                [__builtin_parity], [$1(0)],
-                [__builtin_parityl], [$1(0)],
-                [__builtin_parityll], [$1(0)],
-                [__builtin_popcount], [$1(0)],
-                [__builtin_popcountl], [$1(0)],
-                [__builtin_popcountll], [$1(0)],
-                [__builtin_powi], [$1(0, 0)],
-                [__builtin_powif], [$1(0, 0)],
-                [__builtin_powil], [$1(0, 0)],
-                [__builtin_prefetch], [$1("")],
-                [__builtin_trap], [$1()],
-                [__builtin_types_compatible_p], [$1(int, int)],
-                [__builtin_unreachable], [$1()],
-                [m4_warn([syntax], [Unsupported built-in $1, the test may fail])
-                 $1()]
-            )
-            ])],
-            [AS_VAR_SET([ac_var], [yes])],
-            [AS_VAR_SET([ac_var], [no])])
-    ])
-
-    AS_IF([test yes = AS_VAR_GET([ac_var])],
-        [AC_DEFINE_UNQUOTED(AS_TR_CPP(HAVE_$1), 1,
-            [Define to 1 if the system has the `$1' built-in function])], [])
-
-    AS_VAR_POPDEF([ac_var])
-])

aclocal.m4

@@ -1,540 +0,0 @@
-# generated automatically by aclocal 1.15 -*- Autoconf -*-
-
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-# ===========================================================================
-#     http://www.gnu.org/software/autoconf-archive/ax_python_module.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_PYTHON_MODULE(modname[, fatal, python])
-#
-# DESCRIPTION
-#
-#   Checks for Python module.
-#
-#   If fatal is non-empty then absence of a module will trigger an error.
-#   The third parameter can either be "python" for Python 2 or "python3" for
-#   Python 3; defaults to Python 3.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Andrew Collier
-#
-#   Copying and distribution of this file, with or without modification, are
-#   permitted in any medium without royalty provided the copyright notice
-#   and this notice are preserved. This file is offered as-is, without any
-#   warranty.
-
-#serial 8
-
-AU_ALIAS([AC_PYTHON_MODULE], [AX_PYTHON_MODULE])
-AC_DEFUN([AX_PYTHON_MODULE],[
-    if test -z $PYTHON;
-    then
-        if test -z "$3";
-        then
-            PYTHON="python3"
-        else
-            PYTHON="$3"
-        fi
-    fi
-    PYTHON_NAME=`basename $PYTHON`
-    AC_MSG_CHECKING($PYTHON_NAME module: $1)
-    $PYTHON -c "import $1" 2>/dev/null
-    if test $? -eq 0;
-    then
-        AC_MSG_RESULT(yes)
-        eval AS_TR_CPP(HAVE_PYMOD_$1)=yes
-    else
-        AC_MSG_RESULT(no)
-        eval AS_TR_CPP(HAVE_PYMOD_$1)=no
-        #
-        if test -n "$2"
-        then
-            AC_MSG_ERROR(failed to find required module $1)
-            exit 1
-        fi
-    fi
-])
-
-# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-# 
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
-	_pkg_min_version=m4_default([$1], [0.9.0])
-	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_RESULT([no])
-		PKG_CONFIG=""
-	fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists.  Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
-    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-  m4_default([$2], [:])
-m4_ifvaln([$3], [else
-  $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
-    pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
-    PKG_CHECK_EXISTS([$3],
-                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
-		      test "x$?" != "x0" && pkg_failed=yes ],
-		     [pkg_failed=yes])
- else
-    pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
-   	AC_MSG_RESULT([no])
-        _PKG_SHORT_ERRORS_SUPPORTED
-        if test $_pkg_short_errors_supported = yes; then
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
-        else 
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
-        fi
-	# Put the nasty error message in config.log where it belongs
-	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
-	m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])[]dnl
-        ])
-elif test $pkg_failed = untried; then
-     	AC_MSG_RESULT([no])
-	m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
-        ])
-else
-	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-        AC_MSG_RESULT([yes])
-	$3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-
-# PKG_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable pkgconfigdir as the location where a module
-# should install pkg-config .pc files. By default the directory is
-# $libdir/pkgconfig, but the default can be changed by passing
-# DIRECTORY. The user can override through the --with-pkgconfigdir
-# parameter.
-AC_DEFUN([PKG_INSTALLDIR],
-[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
-m4_pushdef([pkg_description],
-    [pkg-config installation directory @<:@]pkg_default[@:>@])
-AC_ARG_WITH([pkgconfigdir],
-    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
-    [with_pkgconfigdir=]pkg_default)
-AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
-m4_popdef([pkg_default])
-m4_popdef([pkg_description])
-]) dnl PKG_INSTALLDIR
-
-
-# PKG_NOARCH_INSTALLDIR(DIRECTORY)
-# -------------------------
-# Substitutes the variable noarch_pkgconfigdir as the location where a
-# module should install arch-independent pkg-config .pc files. By
-# default the directory is $datadir/pkgconfig, but the default can be
-# changed by passing DIRECTORY. The user can override through the
-# --with-noarch-pkgconfigdir parameter.
-AC_DEFUN([PKG_NOARCH_INSTALLDIR],
-[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
-m4_pushdef([pkg_description],
-    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
-AC_ARG_WITH([noarch-pkgconfigdir],
-    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
-    [with_noarch_pkgconfigdir=]pkg_default)
-AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
-m4_popdef([pkg_default])
-m4_popdef([pkg_description])
-]) dnl PKG_NOARCH_INSTALLDIR
-
-
-# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
-# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-# -------------------------------------------
-# Retrieves the value of the pkg-config variable for the given module.
-AC_DEFUN([PKG_CHECK_VAR],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
-
-_PKG_CONFIG([$1], [variable="][$3]["], [$2])
-AS_VAR_COPY([$1], [pkg_cv_][$1])
-
-AS_VAR_IF([$1], [""], [$5], [$4])dnl
-])# PKG_CHECK_VAR
-
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-# ---------------------------------------------------------------------------
-# Adds support for distributing Python modules and packages.  To
-# install modules, copy them to $(pythondir), using the python_PYTHON
-# automake variable.  To install a package with the same name as the
-# automake package, install to $(pkgpythondir), or use the
-# pkgpython_PYTHON automake variable.
-#
-# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
-# locations to install python extension modules (shared libraries).
-# Another macro is required to find the appropriate flags to compile
-# extension modules.
-#
-# If your package is configured with a different prefix to python,
-# users will have to add the install directory to the PYTHONPATH
-# environment variable, or create a .pth file (see the python
-# documentation for details).
-#
-# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
-# cause an error if the version of python installed on the system
-# doesn't meet the requirement.  MINIMUM-VERSION should consist of
-# numbers and dots only.
-AC_DEFUN([AM_PATH_PYTHON],
- [
-  dnl Find a Python interpreter.  Python versions prior to 2.0 are not
-  dnl supported. (2.0 was released on October 16, 2000).
-  m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
-[python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
- python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0])
-
-  AC_ARG_VAR([PYTHON], [the Python interpreter])
-
-  m4_if([$1],[],[
-    dnl No version check is needed.
-    # Find any Python interpreter.
-    if test -z "$PYTHON"; then
-      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
-    fi
-    am_display_PYTHON=python
-  ], [
-    dnl A version check is needed.
-    if test -n "$PYTHON"; then
-      # If the user set $PYTHON, use it and don't search something else.
-      AC_MSG_CHECKING([whether $PYTHON version is >= $1])
-      AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
-			      [AC_MSG_RESULT([yes])],
-			      [AC_MSG_RESULT([no])
-			       AC_MSG_ERROR([Python interpreter is too old])])
-      am_display_PYTHON=$PYTHON
-    else
-      # Otherwise, try each interpreter until we find one that satisfies
-      # VERSION.
-      AC_CACHE_CHECK([for a Python interpreter with version >= $1],
-	[am_cv_pathless_PYTHON],[
-	for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
-	  test "$am_cv_pathless_PYTHON" = none && break
-	  AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
-	done])
-      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
-      if test "$am_cv_pathless_PYTHON" = none; then
-	PYTHON=:
-      else
-        AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
-      fi
-      am_display_PYTHON=$am_cv_pathless_PYTHON
-    fi
-  ])
-
-  if test "$PYTHON" = :; then
-  dnl Run any user-specified action, or abort.
-    m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
-  else
-
-  dnl Query Python for its version number.  Getting [:3] seems to be
-  dnl the best way to do this; it's what "site.py" does in the standard
-  dnl library.
-
-  AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
-    [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
-  AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
-
-  dnl Use the values of $prefix and $exec_prefix for the corresponding
-  dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX.  These are made
-  dnl distinct variables so they can be overridden if need be.  However,
-  dnl general consensus is that you shouldn't need this ability.
-
-  AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
-  AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])
-
-  dnl At times (like when building shared libraries) you may want
-  dnl to know which OS platform Python thinks this is.
-
-  AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
-    [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
-  AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
-
-  # Just factor out some code duplication.
-  am_python_setup_sysconfig="\
-import sys
-# Prefer sysconfig over distutils.sysconfig, for better compatibility
-# with python 3.x.  See automake bug#10227.
-try:
-    import sysconfig
-except ImportError:
-    can_use_sysconfig = 0
-else:
-    can_use_sysconfig = 1
-# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
-# <https://github.com/pypa/virtualenv/issues/118>
-try:
-    from platform import python_implementation
-    if python_implementation() == 'CPython' and sys.version[[:3]] == '2.7':
-        can_use_sysconfig = 0
-except ImportError:
-    pass"
-
-  dnl Set up 4 directories:
-
-  dnl pythondir -- where to install python scripts.  This is the
-  dnl   site-packages directory, not the python standard library
-  dnl   directory like in previous automake betas.  This behavior
-  dnl   is more consistent with lispdir.m4 for example.
-  dnl Query distutils for this directory.
-  AC_CACHE_CHECK([for $am_display_PYTHON script directory],
-    [am_cv_python_pythondir],
-    [if test "x$prefix" = xNONE
-     then
-       am_py_prefix=$ac_default_prefix
-     else
-       am_py_prefix=$prefix
-     fi
-     am_cv_python_pythondir=`$PYTHON -c "
-$am_python_setup_sysconfig
-if can_use_sysconfig:
-    sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
-else:
-    from distutils import sysconfig
-    sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
-sys.stdout.write(sitedir)"`
-     case $am_cv_python_pythondir in
-     $am_py_prefix*)
-       am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
-       am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
-       ;;
-     *)
-       case $am_py_prefix in
-         /usr|/System*) ;;
-         *)
-	  am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
-	  ;;
-       esac
-       ;;
-     esac
-    ])
-  AC_SUBST([pythondir], [$am_cv_python_pythondir])
-
-  dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
-  dnl   PYTHON_SITE_PACKAGE in previous betas, but this naming is
-  dnl   more consistent with the rest of automake.
-
-  AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
-
-  dnl pyexecdir -- directory for installing python extension modules
-  dnl   (shared libraries)
-  dnl Query distutils for this directory.
-  AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
-    [am_cv_python_pyexecdir],
-    [if test "x$exec_prefix" = xNONE
-     then
-       am_py_exec_prefix=$am_py_prefix
-     else
-       am_py_exec_prefix=$exec_prefix
-     fi
-     am_cv_python_pyexecdir=`$PYTHON -c "
-$am_python_setup_sysconfig
-if can_use_sysconfig:
-    sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
-else:
-    from distutils import sysconfig
-    sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
-sys.stdout.write(sitedir)"`
-     case $am_cv_python_pyexecdir in
-     $am_py_exec_prefix*)
-       am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
-       am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
-       ;;
-     *)
-       case $am_py_exec_prefix in
-         /usr|/System*) ;;
-         *)
-	   am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
-	   ;;
-       esac
-       ;;
-     esac
-    ])
-  AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
-
-  dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
-
-  AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
-
-  dnl Run any user-specified action.
-  $2
-  fi
-
-])
-
-
-# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
-# ---------------------------------------------------------------------------
-# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
-# Run ACTION-IF-FALSE otherwise.
-# This test uses sys.hexversion instead of the string equivalent (first
-# word of sys.version), in order to cope with versions such as 2.2c1.
-# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).
-AC_DEFUN([AM_PYTHON_CHECK_VERSION],
- [prog="import sys
-# split strings by '.' and convert to numeric.  Append some zeros
-# because we need at least 4 digits for the hex conversion.
-# map returns an iterator in Python 3.0 and a list in 2.x
-minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
-minverhex = 0
-# xrange is not present in Python 3.0 and range returns an iterator
-for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
-sys.exit(sys.hexversion < minverhex)"
-  AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
-
-# Copyright (C) 2001-2014 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_RUN_LOG(COMMAND)
-# -------------------
-# Run COMMAND, save the exit status in ac_status, and log it.
-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
-AC_DEFUN([AM_RUN_LOG],
-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
-   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
-   ac_status=$?
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   (exit $ac_status); }])
-
-
-m4_include([acinclude.m4])

autoconf/install-sh

@@ -1,62 +1,36 @@
 #!/bin/sh
+#
 # install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
+# This comes from X11R5 (mit/util/scripts/install.sh).
 #
-# Copyright (C) 1994 X Consortium
+# Copyright 1991 by the Massachusetts Institute of Technology
 #
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
 # `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
 
-nl='
-'
-IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
 doit="${DOITPROG-}"
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
 
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
 
 mvprog="${MVPROG-mv}"
 cpprog="${CPPROG-cp}"
@@ -67,441 +41,211 @@ stripprog="${STRIPPROG-strip}"
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
 rmcmd="$rmprog -f"
 mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
+src=""
+dst=""
+dir_arg=""
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
 
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
+	-d) dir_arg=true
+	    shift
+	    continue;;
 
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
 
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
 
-while test $# -ne 0; do
-  case $1 in
-    -c) shift
-        continue;;
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
 
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
 
-    --help) echo "$usage"; exit $?;;
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
 
-    -m) mode=$2
-        shift
-        shift
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	*)  if [ x"$src" = x ]
 	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
+		src=$1
 	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
 	    fi
-	    trap '' 0;;
-	esac;;
+	    shift
+	    continue;;
     esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
-
-    trap '' 0
-  fi
 done
 
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

autoconf/py-compile

@@ -1,170 +0,0 @@
-#!/bin/sh
-# py-compile - Compile a Python program
-
-scriptversion=2011-06-08.12; # UTC
-
-# Copyright (C) 2000-2014 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-if [ -z "$PYTHON" ]; then
-  PYTHON=python
-fi
-
-me=py-compile
-
-usage_error ()
-{
-  echo "$me: $*" >&2
-  echo "Try '$me --help' for more information." >&2
-  exit 1
-}
-
-basedir=
-destdir=
-while test $# -ne 0; do
-  case "$1" in
-    --basedir)
-      if test $# -lt 2; then
-        usage_error "option '--basedir' requires an argument"
-      else
-        basedir=$2
-      fi
-      shift
-      ;;
-    --destdir)
-      if test $# -lt 2; then
-        usage_error "option '--destdir' requires an argument"
-      else
-        destdir=$2
-      fi
-      shift
-      ;;
-    -h|--help)
-      cat <<\EOF
-Usage: py-compile [--help] [--version] [--basedir DIR] [--destdir DIR] FILES..."
-
-Byte compile some python scripts FILES.  Use --destdir to specify any
-leading directory path to the FILES that you don't want to include in the
-byte compiled file.  Specify --basedir for any additional path information you
-do want to be shown in the byte compiled file.
-
-Example:
-  py-compile --destdir /tmp/pkg-root --basedir /usr/share/test test.py test2.py
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-      exit $?
-      ;;
-    -v|--version)
-      echo "$me $scriptversion"
-      exit $?
-      ;;
-    --)
-      shift
-      break
-      ;;
-    -*)
-      usage_error "unrecognized option '$1'"
-      ;;
-    *)
-      break
-      ;;
-  esac
-  shift
-done
-
-files=$*
-if test -z "$files"; then
-    usage_error "no files given"
-fi
-
-# if basedir was given, then it should be prepended to filenames before
-# byte compilation.
-if [ -z "$basedir" ]; then
-    pathtrans="path = file"
-else
-    pathtrans="path = os.path.join('$basedir', file)"
-fi
-
-# if destdir was given, then it needs to be prepended to the filename to
-# byte compile but not go into the compiled file.
-if [ -z "$destdir" ]; then
-    filetrans="filepath = path"
-else
-    filetrans="filepath = os.path.normpath('$destdir' + os.sep + path)"
-fi
-
-$PYTHON -c "
-import sys, os, py_compile, imp
-
-files = '''$files'''
-
-sys.stdout.write('Byte-compiling python modules...\n')
-for file in files.split():
-    $pathtrans
-    $filetrans
-    if not os.path.exists(filepath) or not (len(filepath) >= 3
-                                            and filepath[-3:] == '.py'):
-	    continue
-    sys.stdout.write(file)
-    sys.stdout.flush()
-    if hasattr(imp, 'get_tag'):
-        py_compile.compile(filepath, imp.cache_from_source(filepath), path)
-    else:
-        py_compile.compile(filepath, filepath + 'c', path)
-sys.stdout.write('\n')" || exit $?
-
-# this will fail for python < 1.5, but that doesn't matter ...
-$PYTHON -O -c "
-import sys, os, py_compile, imp
-
-# pypy does not use .pyo optimization
-if hasattr(sys, 'pypy_translation_info'):
-    sys.exit(0)
-
-files = '''$files'''
-sys.stdout.write('Byte-compiling python modules (optimized versions) ...\n')
-for file in files.split():
-    $pathtrans
-    $filetrans
-    if not os.path.exists(filepath) or not (len(filepath) >= 3
-                                            and filepath[-3:] == '.py'):
-	    continue
-    sys.stdout.write(file)
-    sys.stdout.flush()
-    if hasattr(imp, 'get_tag'):
-        py_compile.compile(filepath, imp.cache_from_source(filepath, False), path)
-    else:
-        py_compile.compile(filepath, filepath + 'o', path)
-sys.stdout.write('\n')" 2>/dev/null || :
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

conf/.gitignore

@@ -1,6 +0,0 @@
-command_profile_template.profile
-example.conf
-lvmlocal.conf
-metadata_profile_template.profile
-configure.h
-lvm-version.h

conf/Makefile.in

@@ -1,58 +0,0 @@
-#
-# Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-CONFSRC=example.conf
-CONFDEST=lvm.conf
-CONFLOCAL=lvmlocal.conf
-
-PROFILE_TEMPLATES=command_profile_template.profile metadata_profile_template.profile
-PROFILES=$(PROFILE_TEMPLATES) \
-	$(srcdir)/cache-mq.profile \
-	$(srcdir)/cache-smq.profile \
-	$(srcdir)/thin-generic.profile \
-	$(srcdir)/thin-performance.profile \
-	$(srcdir)/lvmdbusd.profile
-
-include $(top_builddir)/make.tmpl
-
-.PHONY: install_conf install_localconf install_profiles
-
-generate:
-	(cat $(top_srcdir)/conf/example.conf.base && LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withcomments --ignorelocal --withspaces) > example.conf.in
-	(cat $(top_srcdir)/conf/lvmlocal.conf.base && LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withcomments --withspaces local) > lvmlocal.conf.in
-
-install_conf: $(CONFSRC)
-	@if [ ! -e $(confdir)/$(CONFDEST) ]; then \
-		echo "$(INSTALL_WDATA) -D $< $(confdir)/$(CONFDEST)"; \
-		$(INSTALL_WDATA) -D $< $(confdir)/$(CONFDEST); \
-	fi
-
-install_localconf: $(CONFLOCAL)
-	@if [ ! -e $(confdir)/$(CONFLOCAL) ]; then \
-		echo "$(INSTALL_WDATA) -D $< $(confdir)/$(CONFLOCAL)"; \
-		$(INSTALL_WDATA) -D $< $(confdir)/$(CONFLOCAL); \
-	fi
-
-install_profiles: $(PROFILES)
-	$(INSTALL_DIR) $(DESTDIR)$(DEFAULT_PROFILE_DIR)
-	$(INSTALL_DATA) $(PROFILES) $(DESTDIR)$(DEFAULT_PROFILE_DIR)/
-
-install_lvm2: install_conf install_localconf install_profiles
-
-install: install_lvm2
-
-DISTCLEAN_TARGETS += $(CONFSRC) $(CONFLOCAL) $(PROFILE_TEMPLATES)

conf/cache-mq.profile

@@ -1,20 +0,0 @@
-# Demo configuration 'mq' cache policy
-#
-# Note: This policy has been deprecated in favor of the smq policy
-# keyword "default" means, setting is left with kernel defaults.
-#
-
-allocation {
-	cache_pool_chunk_size = 64
-	cache_mode = "writethrough"
-	cache_policy = "mq"
-	cache_settings {
-		mq {
-			sequential_threshold = "default"	#  #nr_sequential_ios
-			random_threshold = "default"		#  #nr_random_ios
-			read_promote_adjustment = "default"
-			write_promote_adjustment = "default"
-			discard_promote_adjustment = "default"
-		}
-	}
-}

conf/cache-smq.profile

@@ -1,14 +0,0 @@
-# Demo configuration 'smq' cache policy
-#
-# The stochastic multi-queue (smq) policy addresses some of the problems
-# with the multiqueue (mq) policy and uses less memory.
-#
-
-allocation {
-	cache_pool_chunk_size = 64
-	cache_mode = "writethrough"
-	cache_policy = "smq"
-	cache_settings {
-	        # currently no settins for "smq" policy
-	}
-}

conf/command_profile_template.profile.in

@@ -1,74 +0,0 @@
-# This is a command profile template for the LVM2 system.
-#
-# It contains all configuration settings that are customizable by command
-# profiles. To create a new command profile, select the settings you want
-# to customize and add them in a new file named <profile_name>.profile.
-# Then install the new profile in a directory as defined by config/profile_dir
-# setting found in @DEFAULT_SYS_DIR@/lvm.conf file.
-#
-# Command profiles can be referenced by using the --commandprofile option then.
-#
-# Refer to 'man lvm.conf' for further information about profiles and
-# general configuration file layout.
-#
-allocation {
-	cache_mode="writethrough"
-	cache_settings {
-	}
-}
-log {
-	report_command_log=0
-	command_log_sort="log_seq_num"
-	command_log_cols="log_seq_num,log_type,log_context,log_object_type,log_object_name,log_object_id,log_object_group,log_object_group_id,log_message,log_errno,log_ret_code"
-	command_log_selection="!(log_type=status && message=success)"
-}
-global {
-	units="h"
-	si_unit_consistency=1
-	suffix=1
-	lvdisplay_shows_full_device_path=0
-}
-report {
-	output_format="basic"
-	compact_output=0
-	compact_output_cols=""
-	aligned=1
-	buffered=1
-	headings=1
-	separator=" "
-	list_item_separator=","
-	prefixes=0
-	quoted=1
-	columns_as_rows=0
-	binary_values_as_numeric=0
-	time_format="%Y-%m-%d %T %z"
-	devtypes_sort="devtype_name"
-	devtypes_cols="devtype_name,devtype_max_partitions,devtype_description"
-	devtypes_cols_verbose="devtype_name,devtype_max_partitions,devtype_description"
-	lvs_sort="vg_name,lv_name"
-	lvs_cols="lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv"
-	lvs_cols_verbose="lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert_lv,lv_uuid,lv_profile"
-	vgs_sort="vg_name"
-	vgs_cols="vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
-	vgs_cols_verbose="vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
-	pvs_sort="pv_name"
-	pvs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
-	pvs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
-	segs_sort="vg_name,lv_name,seg_start"
-	segs_cols="lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
-	segs_cols_verbose="lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
-	pvsegs_sort="pv_name,pvseg_start"
-	pvsegs_cols="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
-	pvsegs_cols_verbose="pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
-	vgs_cols_full="vg_all"
-	pvs_cols_full="pv_all"
-	lvs_cols_full="lv_all"
-	pvsegs_cols_full="pvseg_all,pv_uuid,lv_uuid"
-	segs_cols_full="seg_all,lv_uuid"
-	vgs_sort_full="vg_name"
-	pvs_sort_full="pv_name"
-	lvs_sort_full="vg_name,lv_name"
-	pvsegs_sort_full="pv_uuid,pvseg_start"
-	segs_sort_full="lv_uuid,seg_start"
-	mark_hidden_devices=1
-}

conf/example.conf.base

@@ -1,23 +0,0 @@
-# This is an example configuration file for the LVM2 system.
-# It contains the default settings that would be used if there was no
-# @DEFAULT_SYS_DIR@/lvm.conf file.
-#
-# Refer to 'man lvm.conf' for further information including the file layout.
-#
-# Refer to 'man lvm.conf' for information about how settings configured in
-# this file are combined with built-in values and command line options to
-# arrive at the final values used by LVM.
-#
-# Refer to 'man lvmconfig' for information about displaying the built-in
-# and configured values used by LVM.
-#
-# If a default value is set in this file (not commented out), then a
-# new version of LVM using this file will continue using that value,
-# even if the new version of LVM changes the built-in default value.
-#
-# To put this file in a different directory and override @DEFAULT_SYS_DIR@ set
-# the environment variable LVM_SYSTEM_DIR before running the tools.
-#
-# N.B. Take care that each setting only appears once if uncommenting
-# example settings in this file.
-

conf/lvmdbusd.profile

@@ -1,50 +0,0 @@
-#
-# DO NOT EDIT THIS FILE!
-#
-# LVM configuration profile used by lvmdbusd daemon.
-#
-# This sets up LVM to produce output in the most suitable format for processing
-# by lvmdbusd daemon which utilizes LVM shell to execute LVM commands.
-#
-# Do not edit this file in any way. This profile is distributed together with
-# lvmdbusd and it contains configuration that is important for lvmdbusd to
-# cooperate and interface with LVM correctly.
-#
-
-global {
-	# use bytes for expected and deterministic output
-	units=b
-	# no need for suffix if we have units set
-	suffix=0
-}
-
-report {
-	compact_output=0
-	compact_output_cols=""
-	binary_values_as_numeric=0
-	# time in number of seconds since the Epoch
-	time_format="%s"
-	mark_hidden_devices=1
-	# lvmdbusd expects JSON output
-	output_format=json
-	# *_cols_full for lvm fullreport's fields which lvmdbusd relies on to update its state
-	vgs_cols_full="vg_name,vg_uuid,vg_fmt,vg_size,vg_free,vg_sysid,vg_extent_size,vg_extent_count,vg_free_count,vg_profile,max_lv,max_pv,pv_count,lv_count,snap_count,vg_seqno,vg_mda_count,vg_mda_free,vg_mda_size,vg_mda_used_count,vg_attr,vg_tags"
-	pvs_cols_full="pv_name,pv_uuid,pv_fmt,pv_size,pv_free,pv_used,dev_size,pv_mda_size,pv_mda_free,pv_ba_start,pv_ba_size,pe_start,pv_pe_count,pv_pe_alloc_count,pv_attr,pv_tags,vg_name,vg_uuid"
-	lvs_cols_full="lv_uuid,lv_name,lv_path,lv_size,vg_name,pool_lv_uuid,pool_lv,origin_uuid,origin,data_percent,lv_attr,lv_tags,vg_uuid,lv_active,data_lv,metadata_lv,lv_parent,lv_role,lv_layout"
-	pvsegs_cols_full="pvseg_start,pvseg_size,segtype,pv_uuid,lv_uuid,pv_name"
-	segs_cols_full="seg_pe_ranges,segtype,lv_uuid"
-	vgs_sort_full="vg_name"
-	pvs_sort_full="pv_name"
-	lvs_sort_full="vg_name,lv_name"
-	pvsegs_sort_full="pv_uuid,pvseg_start"
-	segs_sort_full="lv_uuid,seg_start"
-}
-
-log {
-	# lvmdbusd relies on command log report to inspect LVM command's execution status
-	report_command_log=1
-	# display only outermost LVM shell-related log that lvmdbusd inspects first after LVM command execution (it calls 'lastlog' for more detailed log afterwards if needed)
-	command_log_selection="log_context=shell"
-	command_log_cols="log_seq_num,log_type,log_context,log_object_type,log_object_name,log_object_id,log_object_group,log_object_group_id,log_message,log_errno,log_ret_code"
-	command_log_sort="log_seq_num"
-}

conf/lvmlocal.conf.base

@@ -1,19 +0,0 @@
-# This is a local configuration file template for the LVM2 system
-# which should be installed as @DEFAULT_SYS_DIR@/lvmlocal.conf .
-#
-# Refer to 'man lvm.conf' for information about the file layout.
-#
-# To put this file in a different directory and override
-# @DEFAULT_SYS_DIR@ set the environment variable LVM_SYSTEM_DIR before
-# running the tools.
-#
-# The lvmlocal.conf file is normally expected to contain only the
-# "local" section which contains settings that should not be shared or
-# repeated among different hosts.  (But if other sections are present,
-# they *will* get processed.  Settings in this file override equivalent
-# ones in lvm.conf and are in turn overridden by ones in any enabled
-# lvm_<tag>.conf files.)
-#
-# Please take care that each setting only appears once if uncommenting
-# example settings in this file and never copy this file between hosts.
-

conf/lvmlocal.conf.in

@@ -1,57 +0,0 @@
-# This is a local configuration file template for the LVM2 system
-# which should be installed as @DEFAULT_SYS_DIR@/lvmlocal.conf .
-#
-# Refer to 'man lvm.conf' for information about the file layout.
-#
-# To put this file in a different directory and override
-# @DEFAULT_SYS_DIR@ set the environment variable LVM_SYSTEM_DIR before
-# running the tools.
-#
-# The lvmlocal.conf file is normally expected to contain only the
-# "local" section which contains settings that should not be shared or
-# repeated among different hosts.  (But if other sections are present,
-# they *will* get processed.  Settings in this file override equivalent
-# ones in lvm.conf and are in turn overridden by ones in any enabled
-# lvm_<tag>.conf files.)
-#
-# Please take care that each setting only appears once if uncommenting
-# example settings in this file and never copy this file between hosts.
-
-
-# Configuration section local.
-# LVM settings that are specific to the local host.
-local {
-
-	# Configuration option local/system_id.
-	# Defines the local system ID for lvmlocal mode.
-	# This is used when global/system_id_source is set to 'lvmlocal' in the
-	# main configuration file, e.g. lvm.conf. When used, it must be set to
-	# a unique value among all hosts sharing access to the storage,
-	# e.g. a host name.
-	# 
-	# Example
-	# Set no system ID:
-	# system_id = ""
-	# Set the system_id to a specific name:
-	# system_id = "host1"
-	# 
-	# This configuration option has an automatic default value.
-	# system_id = ""
-
-	# Configuration option local/extra_system_ids.
-	# A list of extra VG system IDs the local host can access.
-	# VGs with the system IDs listed here (in addition to the host's own
-	# system ID) can be fully accessed by the local host. (These are
-	# system IDs that the host sees in VGs, not system IDs that identify
-	# the local host, which is determined by system_id_source.)
-	# Use this only after consulting 'man lvmsystemid' to be certain of
-	# correct usage and possible dangers.
-	# This configuration option does not have a default value defined.
-
-	# Configuration option local/host_id.
-	# The lvmlockd sanlock host_id.
-	# This must be unique among all hosts, and must be between 1 and 2000.
-	# Applicable only if LVM is compiled with lockd support
-	# This configuration option has an automatic default value.
-	# host_id = 0
-}

conf/metadata_profile_template.profile.in

@@ -1,24 +0,0 @@
-# This is a metadata profile template for the LVM2 system.
-#
-# It contains all configuration settings that are customizable by metadata
-# profiles. To create a new metadata profile, select the settings you want
-# to customize and add them in a new file named <profile_name>.profile.
-# Then install the new profile in a directory as defined by config/profile_dir
-# setting found in @DEFAULT_SYS_DIR@/lvm.conf file.
-#
-# Metadata profiles can be referenced by using the --metadataprofile LVM2
-# command line option.
-#
-# Refer to 'man lvm.conf' for further information about profiles and
-# general configuration file layout.
-#
-allocation {
-	thin_pool_zero=1
-	thin_pool_discards="passdown"
-	thin_pool_chunk_size_policy="generic"
-#	thin_pool_chunk_size=128
-}
-activation {
-	thin_pool_autoextend_threshold=100
-	thin_pool_autoextend_percent=20
-}

conf/thin-generic.profile

@@ -1,4 +0,0 @@
-allocation {
-	thin_pool_chunk_size_policy = "generic"
-	thin_pool_zero = 1
-}

conf/thin-performance.profile

@@ -1,4 +0,0 @@
-allocation {
-	thin_pool_chunk_size_policy = "performance"
-	thin_pool_zero = 0
-}

coverity/coverity_model.c

@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * Coverity usage:
- *
- * translate model into xml
- * cov-make-library -of coverity_model.xml coverity_model.c
- *
- * compile (using outdir 'cov'):
- * cov-build --dir=cov make CC=gcc
- *
- * analyze (agressively, using 'cov')
- * cov-analyze --dir cov --wait-for-license --hfa --concurrency --enable-fnptr --enable-constraint-fpp --security --all --aggressiveness-level=high --field-offset-escape --user-model-file=coverity/coverity_model.xml
- *
- * generate html output (to 'html' from 'cov'):
- * cov-format-errors --dir cov  --html-output html
- */
-
-struct lv_segment;
-struct logical_volume;
-
-struct lv_segment *first_seg(const struct logical_volume *lv)
-{
-	return ((struct lv_segment **)lv)[0];
-}
-
-struct lv_segment *last_seg(const struct logical_volume *lv)
-{
-	return ((struct lv_segment **)lv)[0];
-}
-
-/* simple_memccpy() from glibc */
-void *memccpy(void *dest, const void *src, int c, size_t n)
-{
-	const char *s = src;
-	char *d = dest;
-
-	while (n-- > 0)
-		if ((*d++ = *s++) == (char) c)
-			return d;
-
-	return 0;
-}
-
-/*
- * 2 lines bellow needs to be placed in coverity/config/user_nodefs.h
- * Not sure about any other way.
- * Without them, coverity shows warning since x86 system header files
- * are using inline assembly to reset fdset
- */
-//#nodef FD_ZERO model_FD_ZERO
-//void model_FD_ZERO(void *fdset);
-
-void model_FD_ZERO(void *fdset)
-{
-	unsigned i;
-
-	for (i = 0; i < 1024 / 8 / sizeof(long); ++i)
-		((long*)fdset)[i] = 0;
-}
-
-/*
- * Added extra pointer check to not need these models,
- * for now just keep then in file
- */
-
-/*
-struct cmd_context;
-struct profile;
-
-const char *find_config_tree_str(struct cmd_context *cmd, int id, struct profile *profile)
-{
-        return "text";
-}
-
-const char *find_config_tree_str_allow_empty(struct cmd_context *cmd, int id, struct profile *profile)
-{
-        return "text";
-}
-*/
-
-/*
- * Until fixed coverity case# 00531860:
- *   A FORWARD_NULL false positive on a recursive function call
- *
- * model also these functions:
- */
-/*
-const struct dm_config_node;
-const struct dm_config_node *find_config_tree_array(struct cmd_context *cmd, int id, struct profile *profile)
-{
-	const struct dm_config_node *cn;
-
-	return cn;
-}
-
-const struct dm_config_node *find_config_tree_node(struct cmd_context *cmd, int id, struct profile *profile)
-{
-	const struct dm_config_node *cn;
-
-	return cn;
-}
-
-int find_config_tree_bool(struct cmd_context *cmd, int id, struct profile *profile)
-{
-	int b;
-
-	return b;
-}
-*/

daemons/Makefile.in

@@ -1,59 +0,0 @@
-#
-# Copyright (C) 2004-2015 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-.PHONY: dmeventd clvmd cmirrord lvmetad lvmpolld lvmlockd
-
-ifneq ("@CLVMD@", "none")
-  SUBDIRS += clvmd
-endif
-
-ifeq ("@BUILD_CMIRRORD@", "yes")
-  SUBDIRS += cmirrord
-endif
-
-ifeq ("@BUILD_DMEVENTD@", "yes")
-  SUBDIRS += dmeventd
-ifneq ("$(CFLOW_CMD)", "")
-daemons.cflow: dmeventd.cflow
-endif
-endif
-
-ifeq ("@BUILD_LVMETAD@", "yes")
-  SUBDIRS += lvmetad
-endif
-
-ifeq ("@BUILD_LVMPOLLD@", "yes")
-  SUBDIRS += lvmpolld
-endif
-
-ifeq ("@BUILD_LVMLOCKD@", "yes")
-  SUBDIRS += lvmlockd
-endif
-
-ifeq ("@BUILD_LVMDBUSD@", "yes")
-  SUBDIRS += lvmdbusd
-endif
-
-ifeq ($(MAKECMDGOALS),distclean)
-  SUBDIRS = clvmd cmirrord dmeventd lvmetad lvmpolld lvmlockd lvmdbusd
-endif
-
-include $(top_builddir)/make.tmpl
-
-ifeq ("@BUILD_DMEVENTD@", "yes")
-device-mapper: dmeventd.device-mapper
-endif

daemons/clvmd/.gitignore

@@ -1 +0,0 @@
-clvmd

daemons/clvmd/Makefile.in

@@ -1,103 +0,0 @@
-#
-# Copyright (C) 2004 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-CMAN_LIBS = @CMAN_LIBS@
-CMAN_CFLAGS = @CMAN_CFLAGS@
-CMAP_LIBS = @CMAP_LIBS@
-CMAP_CFLAGS = @CMAP_CFLAGS@
-CONFDB_LIBS = @CONFDB_LIBS@
-CONFDB_CFLAGS = @CONFDB_CFLAGS@
-CPG_LIBS = @CPG_LIBS@
-CPG_CFLAGS = @CPG_CFLAGS@
-DLM_LIBS = @DLM_LIBS@
-DLM_CFLAGS = @DLM_CFLAGS@
-QUORUM_LIBS = @QUORUM_LIBS@
-QUORUM_CFLAGS = @QUORUM_CFLAGS@
-SALCK_LIBS = @SALCK_LIBS@
-SALCK_CFLAGS = @SALCK_CFLAGS@
-
-SOURCES = \
-	clvmd-command.c  \
-	clvmd.c          \
-	lvm-functions.c  \
-	refresh_clvmd.c
-
-ifneq (,$(findstring cman,, "@CLVMD@,"))
-	SOURCES += clvmd-cman.c
-	LMLIBS += $(CMAN_LIBS) $(CONFDB_LIBS) $(DLM_LIBS)
-	CFLAGS += $(CMAN_CFLAGS) $(CONFDB_CFLAGS) $(DLM_CFLAGS)
-	DEFS += -DUSE_CMAN
-endif
-
-ifneq (,$(findstring openais,, "@CLVMD@,"))
-	SOURCES += clvmd-openais.c
-	LMLIBS += $(CONFDB_LIBS) $(CPG_LIBS) $(SALCK_LIBS)
-	CFLAGS += $(CONFDB_CFLAGS) $(CPG_CFLAGS) $(SALCK_CFLAGS)
-	DEFS += -DUSE_OPENAIS
-endif
-
-ifneq (,$(findstring corosync,, "@CLVMD@,"))
-	SOURCES += clvmd-corosync.c
-	LMLIBS += $(CMAP_LIBS) $(CONFDB_LIBS) $(CPG_LIBS) $(DLM_LIBS) $(QUORUM_LIBS)
-	CFLAGS += $(CMAP_CFLAGS) $(CONFDB_CFLAGS) $(CPG_CFLAGS) $(DLM_CFLAGS) $(QUORUM_CFLAGS)
-	DEFS += -DUSE_COROSYNC
-endif
-
-ifneq (,$(findstring singlenode,, "@CLVMD@,"))
-	SOURCES += clvmd-singlenode.c
-	DEFS += -DUSE_SINGLENODE
-endif
-
-ifeq ($(MAKECMDGOALS),distclean)
-	SOURCES += clvmd-cman.c
-	SOURCES += clvmd-openais.c
-	SOURCES += clvmd-corosync.c
-	SOURCES += clvmd-singlenode.c
-endif
-
-TARGETS = \
-	clvmd
-
-LVMLIBS = $(LVMINTERNAL_LIBS)
-
-ifeq ("@DMEVENTD@", "yes")
-	LVMLIBS += -ldevmapper-event
-endif
- 
-include $(top_builddir)/make.tmpl
-
-LVMLIBS += -ldevmapper
-LIBS += $(PTHREAD_LIBS)
-
-CFLAGS += -fno-strict-aliasing $(EXTRA_EXEC_CFLAGS)
-LDFLAGS += $(EXTRA_EXEC_LDFLAGS)
-
-INSTALL_TARGETS = \
-	install_clvmd
-
-clvmd: $(OBJECTS) $(top_builddir)/lib/liblvm-internal.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o clvmd $(OBJECTS) \
-		$(LVMLIBS) $(LMLIBS) $(LIBS)
-
-.PHONY: install_clvmd
-
-install_clvmd: $(TARGETS)
-	$(INSTALL_PROGRAM) -D clvmd $(usrsbindir)/clvmd
-
-install: $(INSTALL_TARGETS)
-
-install_cluster: $(INSTALL_TARGETS)

daemons/clvmd/clvm.h

@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* Definitions for CLVMD server and clients */
-
-/*
- * The protocol spoken over the cluster and across the local socket.
- */
-
-#ifndef _CLVM_H
-#define _CLVM_H
-
-#include "configure.h"
-#include <inttypes.h>
-
-struct clvm_header {
-	uint8_t  cmd;	        /* See below */
-	uint8_t  flags;	        /* See below */
-	uint16_t xid;	        /* Transaction ID */
-	uint32_t clientid;	/* Only used in Daemon->Daemon comms */
-	int32_t  status;	/* For replies, whether request succeeded */
-	uint32_t arglen;	/* Length of argument below.
-				   If >1500 then it will be passed
-				   around the cluster in the system LV */
-	char node[1];		/* Actually a NUL-terminated string, node name.
-				   If this is empty then the command is
-				   forwarded to all cluster nodes unless
-				   FLAG_LOCAL or FLAG_REMOTE is also set. */
-	char args[1];		/* Arguments for the command follow the
-				   node name, This member is only
-				   valid if the node name is empty */
-} __attribute__ ((packed));
-
-/* Flags */
-#define CLVMD_FLAG_LOCAL	1	/* Only do this on the local node */
-#define CLVMD_FLAG_SYSTEMLV	2	/* Data in system LV under my node name */
-#define CLVMD_FLAG_NODEERRS	4	/* Reply has errors in node-specific portion */
-#define CLVMD_FLAG_REMOTE	8	/* Do this on all nodes except for the local node */
-
-/* Name of the local socket to communicate between lvm and clvmd */
-#define CLVMD_SOCKNAME		DEFAULT_RUN_DIR "/clvmd.sock"
-
-/* Internal commands & replies */
-#define CLVMD_CMD_REPLY    1
-#define CLVMD_CMD_VERSION  2	/* Send version around cluster when we start */
-#define CLVMD_CMD_GOAWAY   3	/* Die if received this - we are running
-				   an incompatible version */
-#define CLVMD_CMD_TEST     4	/* Just for mucking about */
-
-#define CLVMD_CMD_LOCK              30
-#define CLVMD_CMD_UNLOCK            31
-
-/* Lock/Unlock commands */
-#define CLVMD_CMD_LOCK_LV           50
-#define CLVMD_CMD_LOCK_VG           51
-#define CLVMD_CMD_LOCK_QUERY	    52
-
-/* Misc functions */
-#define CLVMD_CMD_REFRESH	    40
-#define CLVMD_CMD_GET_CLUSTERNAME   41
-#define CLVMD_CMD_SET_DEBUG	    42
-#define CLVMD_CMD_VG_BACKUP	    43
-#define CLVMD_CMD_RESTART	    44
-#define CLVMD_CMD_SYNC_NAMES	    45
-
-/* Used internally by some callers, but not part of the protocol.*/
-#ifndef NODE_ALL
-#  define NODE_ALL	"*"
-#  define NODE_LOCAL	"."
-#  define NODE_REMOTE	"^"
-#endif
-
-#endif

daemons/clvmd/clvmd-cman.c

@@ -1,505 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * CMAN communication layer for clvmd.
- */
-
-#include "clvmd-common.h"
-
-#include <pthread.h>
-
-#include "clvmd-comms.h"
-#include "clvm.h"
-#include "clvmd.h"
-#include "lvm-functions.h"
-
-#include <libdlm.h>
-
-#include <syslog.h>
-
-#define LOCKSPACE_NAME "clvmd"
-
-struct clvmd_node
-{
-	struct cman_node *node;
-	int clvmd_up;
-};
-
-static int num_nodes;
-static struct cman_node *nodes = NULL;
-static struct cman_node this_node;
-static int count_nodes; /* size of allocated nodes array */
-static struct dm_hash_table *node_updown_hash;
-static dlm_lshandle_t *lockspace;
-static cman_handle_t c_handle;
-
-static void count_clvmds_running(void);
-static void get_members(void);
-static int nodeid_from_csid(const char *csid);
-static int name_from_nodeid(int nodeid, char *name);
-static void event_callback(cman_handle_t handle, void *private, int reason, int arg);
-static void data_callback(cman_handle_t handle, void *private,
-			  char *buf, int len, uint8_t port, int nodeid);
-
-struct lock_wait {
-	pthread_cond_t cond;
-	pthread_mutex_t mutex;
-	struct dlm_lksb lksb;
-};
-
-static int _init_cluster(void)
-{
-	node_updown_hash = dm_hash_create(100);
-
-	/* Open the cluster communication socket */
-	c_handle = cman_init(NULL);
-	if (!c_handle) {
-		syslog(LOG_ERR, "Can't open cluster manager socket: %m");
-		return -1;
-	}
-	DEBUGLOG("Connected to CMAN\n");
-
-	if (cman_start_recv_data(c_handle, data_callback, CLUSTER_PORT_CLVMD)) {
-		syslog(LOG_ERR, "Can't bind cluster socket: %m");
-		return -1;
-	}
-
-	if (cman_start_notification(c_handle, event_callback)) {
-		syslog(LOG_ERR, "Can't start cluster event listening");
-		return -1;
-	}
-
-	/* Get the cluster members list */
-	get_members();
-	count_clvmds_running();
-
-	DEBUGLOG("CMAN initialisation complete\n");
-
-	/* Create a lockspace for LV & VG locks to live in */
-	lockspace = dlm_open_lockspace(LOCKSPACE_NAME);
-	if (!lockspace) {
-		lockspace = dlm_create_lockspace(LOCKSPACE_NAME, 0600);
-		if (!lockspace) {
-			syslog(LOG_ERR, "Unable to create DLM lockspace for CLVM: %m");
-			return -1;
-		}
-		DEBUGLOG("Created DLM lockspace for CLVMD.\n");
-	} else
-		DEBUGLOG("Opened existing DLM lockspace for CLVMD.\n");
-
-	dlm_ls_pthread_init(lockspace);
-	DEBUGLOG("DLM initialisation complete\n");
-	return 0;
-}
-
-static void _cluster_init_completed(void)
-{
-	clvmd_cluster_init_completed();
-}
-
-static int _get_main_cluster_fd(void)
-{
-	return cman_get_fd(c_handle);
-}
-
-static int _get_num_nodes(void)
-{
-	int i;
-	int nnodes = 0;
-
-	/* return number of ACTIVE nodes */
-	for (i=0; i<num_nodes; i++) {
-		if (nodes[i].cn_member && nodes[i].cn_nodeid)
-			nnodes++;
-	}
-	return nnodes;
-}
-
-/* send_message with the fd check removed */
-static int _cluster_send_message(const void *buf, int msglen, const char *csid,
-				 const char *errtext)
-{
-	int nodeid = 0;
-
-	if (csid)
-		memcpy(&nodeid, csid, CMAN_MAX_CSID_LEN);
-
-	if (cman_send_data(c_handle, buf, msglen, 0, CLUSTER_PORT_CLVMD, nodeid) <= 0)
-	{
-		log_error("%s", errtext);
-	}
-	return msglen;
-}
-
-static void _get_our_csid(char *csid)
-{
-	if (this_node.cn_nodeid == 0) {
-		cman_get_node(c_handle, 0, &this_node);
-	}
-	memcpy(csid, &this_node.cn_nodeid, CMAN_MAX_CSID_LEN);
-}
-
-/* Call a callback routine for each node is that known (down means not running a clvmd) */
-static int _cluster_do_node_callback(struct local_client *client,
-				     void (*callback) (struct local_client *,
-						       const char *,
-						       int))
-{
-	int i;
-	int somedown = 0;
-
-	for (i = 0; i < _get_num_nodes(); i++) {
-		if (nodes[i].cn_member && nodes[i].cn_nodeid) {
-			int up = (int)(long)dm_hash_lookup_binary(node_updown_hash, (char *)&nodes[i].cn_nodeid, sizeof(int));
-
-			callback(client, (char *)&nodes[i].cn_nodeid, up);
-			if (!up)
-				somedown = -1;
-		}
-	}
-	return somedown;
-}
-
-/* Process OOB messages from the cluster socket */
-static void event_callback(cman_handle_t handle, void *private, int reason, int arg)
-{
-	char namebuf[MAX_CLUSTER_MEMBER_NAME_LEN];
-
-	switch (reason) {
-        case CMAN_REASON_PORTCLOSED:
-		name_from_nodeid(arg, namebuf);
-		log_notice("clvmd on node %s has died\n", namebuf);
-		DEBUGLOG("Got port closed message, removing node %s\n", namebuf);
-
-		dm_hash_insert_binary(node_updown_hash, (char *)&arg, sizeof(int), (void *)0);
-		break;
-
-	case CMAN_REASON_STATECHANGE:
-		DEBUGLOG("Got state change message, re-reading members list\n");
-		get_members();
-		break;
-
-#if defined(LIBCMAN_VERSION) && LIBCMAN_VERSION >= 2
-	case CMAN_REASON_PORTOPENED:
-		/* Ignore this, wait for startup message from clvmd itself */
-		break;
-
-	case CMAN_REASON_TRY_SHUTDOWN:
-		DEBUGLOG("Got try shutdown, sending OK\n");
-		cman_replyto_shutdown(c_handle, 1);
-		break;
-#endif
-	default:
-		/* ERROR */
-		DEBUGLOG("Got unknown event callback message: %d\n", reason);
-		break;
-	}
-}
-
-static struct local_client *cman_client;
-static int _cluster_fd_callback(struct local_client *fd, char *buf, int len,
-				const char *csid,
-				struct local_client **new_client)
-{
-
-	/* Save this for data_callback */
-	cman_client = fd;
-
-	/* We never return a new client */
-	*new_client = NULL;
-
-	return cman_dispatch(c_handle, 0);
-}
-
-
-static void data_callback(cman_handle_t handle, void *private,
-			  char *buf, int len, uint8_t port, int nodeid)
-{
-	/* Ignore looped back messages */
-	if (nodeid == this_node.cn_nodeid)
-		return;
-	process_message(cman_client, buf, len, (char *)&nodeid);
-}
-
-static void _add_up_node(const char *csid)
-{
-	/* It's up ! */
-	int nodeid = nodeid_from_csid(csid);
-
-	dm_hash_insert_binary(node_updown_hash, (char *)&nodeid, sizeof(int), (void *)1);
-	DEBUGLOG("Added new node %d to updown list\n", nodeid);
-}
-
-static void _cluster_closedown(void)
-{
-	dlm_release_lockspace(LOCKSPACE_NAME, lockspace, 1);
-	cman_finish(c_handle);
-}
-
-static int is_listening(int nodeid)
-{
-	int status;
-
-	do {
-		status = cman_is_listening(c_handle, nodeid, CLUSTER_PORT_CLVMD);
-		if (status < 0 && errno == EBUSY) {	/* Don't busywait */
-			sleep(1);
-			errno = EBUSY;	/* In case sleep trashes it */
-		}
-	}
-	while (status < 0 && errno == EBUSY);
-
-	return status;
-}
-
-/* Populate the list of CLVMDs running.
-   called only at startup time */
-static void count_clvmds_running(void)
-{
-	int i;
-
-	for (i = 0; i < num_nodes; i++) {
-		int nodeid = nodes[i].cn_nodeid;
-
-		if (is_listening(nodeid) == 1)
-			dm_hash_insert_binary(node_updown_hash, (void *)&nodeid, sizeof(int), (void*)1);
-		else
-			dm_hash_insert_binary(node_updown_hash, (void *)&nodeid, sizeof(int), (void*)0);
-	}
-}
-
-/* Get a list of active cluster members */
-static void get_members(void)
-{
-	int retnodes;
-	int status;
-	int i;
-	int high_nodeid = 0;
-
-	num_nodes = cman_get_node_count(c_handle);
-	if (num_nodes == -1) {
-		log_error("Unable to get node count");
-		return;
-	}
-
-	/* Not enough room for new nodes list ? */
-	if (num_nodes > count_nodes && nodes) {
-		free(nodes);
-		nodes = NULL;
-	}
-
-	if (nodes == NULL) {
-		count_nodes = num_nodes + 10; /* Overallocate a little */
-		nodes = malloc(count_nodes * sizeof(struct cman_node));
-		if (!nodes) {
-			log_error("Unable to allocate nodes array\n");
-			exit(5);
-		}
-	}
-
-	status = cman_get_nodes(c_handle, count_nodes, &retnodes, nodes);
-	if (status < 0) {
-		log_error("Unable to get node details");
-		exit(6);
-	}
-
-	/* Get the highest nodeid */
-	for (i=0; i<retnodes; i++) {
-		if (nodes[i].cn_nodeid > high_nodeid)
-			high_nodeid = nodes[i].cn_nodeid;
-	}
-}
-
-
-/* Convert a node name to a CSID */
-static int _csid_from_name(char *csid, const char *name)
-{
-	int i;
-
-	for (i = 0; i < num_nodes; i++) {
-		if (strcmp(name, nodes[i].cn_name) == 0) {
-			memcpy(csid, &nodes[i].cn_nodeid, CMAN_MAX_CSID_LEN);
-			return 0;
-		}
-	}
-	return -1;
-}
-
-/* Convert a CSID to a node name */
-static int _name_from_csid(const char *csid, char *name)
-{
-	int i;
-
-	for (i = 0; i < num_nodes; i++) {
-		if (memcmp(csid, &nodes[i].cn_nodeid, CMAN_MAX_CSID_LEN) == 0) {
-			strcpy(name, nodes[i].cn_name);
-			return 0;
-		}
-	}
-	/* Who?? */
-	strcpy(name, "Unknown");
-	return -1;
-}
-
-/* Convert a node ID to a node name */
-static int name_from_nodeid(int nodeid, char *name)
-{
-	int i;
-
-	for (i = 0; i < num_nodes; i++) {
-		if (nodeid == nodes[i].cn_nodeid) {
-			strcpy(name, nodes[i].cn_name);
-			return 0;
-		}
-	}
-	/* Who?? */
-	strcpy(name, "Unknown");
-	return -1;
-}
-
-/* Convert a CSID to a node ID */
-static int nodeid_from_csid(const char *csid)
-{
-        int nodeid;
-
-	memcpy(&nodeid, csid, CMAN_MAX_CSID_LEN);
-
-	return nodeid;
-}
-
-static int _is_quorate(void)
-{
-	return cman_is_quorate(c_handle);
-}
-
-static void sync_ast_routine(void *arg)
-{
-	struct lock_wait *lwait = arg;
-
-	pthread_mutex_lock(&lwait->mutex);
-	pthread_cond_signal(&lwait->cond);
-	pthread_mutex_unlock(&lwait->mutex);
-}
-
-static int _sync_lock(const char *resource, int mode, int flags, int *lockid)
-{
-	int status;
-	struct lock_wait lwait;
-
-	if (!lockid) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	DEBUGLOG("sync_lock: '%s' mode:%d flags=%d\n", resource,mode,flags);
-	/* Conversions need the lockid in the LKSB */
-	if (flags & LKF_CONVERT)
-		lwait.lksb.sb_lkid = *lockid;
-
-	pthread_cond_init(&lwait.cond, NULL);
-	pthread_mutex_init(&lwait.mutex, NULL);
-	pthread_mutex_lock(&lwait.mutex);
-
-	status = dlm_ls_lock(lockspace,
-			     mode,
-			     &lwait.lksb,
-			     flags,
-			     resource,
-			     strlen(resource),
-			     0, sync_ast_routine, &lwait, NULL, NULL);
-	if (status)
-		return status;
-
-	/* Wait for it to complete */
-	pthread_cond_wait(&lwait.cond, &lwait.mutex);
-	pthread_mutex_unlock(&lwait.mutex);
-
-	*lockid = lwait.lksb.sb_lkid;
-
-	errno = lwait.lksb.sb_status;
-	DEBUGLOG("sync_lock: returning lkid %x\n", *lockid);
-	if (lwait.lksb.sb_status)
-		return -1;
-	else
-		return 0;
-}
-
-static int _sync_unlock(const char *resource /* UNUSED */, int lockid)
-{
-	int status;
-	struct lock_wait lwait;
-
-	DEBUGLOG("sync_unlock: '%s' lkid:%x\n", resource, lockid);
-
-	pthread_cond_init(&lwait.cond, NULL);
-	pthread_mutex_init(&lwait.mutex, NULL);
-	pthread_mutex_lock(&lwait.mutex);
-
-	status = dlm_ls_unlock(lockspace, lockid, 0, &lwait.lksb, &lwait);
-
-	if (status)
-		return status;
-
-	/* Wait for it to complete */
-	pthread_cond_wait(&lwait.cond, &lwait.mutex);
-	pthread_mutex_unlock(&lwait.mutex);
-
-	errno = lwait.lksb.sb_status;
-	if (lwait.lksb.sb_status != EUNLOCK)
-		return -1;
-	else
-		return 0;
-
-}
-
-static int _get_cluster_name(char *buf, int buflen)
-{
-	cman_cluster_t cluster_info;
-	int status;
-
-	status = cman_get_cluster(c_handle, &cluster_info);
-	if (!status) {
-		strncpy(buf, cluster_info.ci_name, buflen);
-	}
-	return status;
-}
-
-static struct cluster_ops _cluster_cman_ops = {
-	.name                     = "cman",
-	.cluster_init_completed   = _cluster_init_completed,
-	.cluster_send_message     = _cluster_send_message,
-	.name_from_csid           = _name_from_csid,
-	.csid_from_name           = _csid_from_name,
-	.get_num_nodes            = _get_num_nodes,
-	.cluster_fd_callback      = _cluster_fd_callback,
-	.get_main_cluster_fd      = _get_main_cluster_fd,
-	.cluster_do_node_callback = _cluster_do_node_callback,
-	.is_quorate               = _is_quorate,
-	.get_our_csid             = _get_our_csid,
-	.add_up_node              = _add_up_node,
-	.cluster_closedown        = _cluster_closedown,
-	.get_cluster_name         = _get_cluster_name,
-	.sync_lock                = _sync_lock,
-	.sync_unlock              = _sync_unlock,
-};
-
-struct cluster_ops *init_cman_cluster(void)
-{
-	if (!_init_cluster())
-		return &_cluster_cman_ops;
-	else
-		return NULL;
-}

daemons/clvmd/clvmd-command.c

@@ -1,414 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
-
-  CLVMD Cluster LVM daemon command processor.
-
-  To add commands to the daemon simply add a processor in do_command and return
-  and messages back in buf and the length in *retlen. The initial value of
-  buflen is the maximum size of the buffer. if buf is not large enough then it
-  may be reallocated by the functions in here to a suitable size bearing in
-  mind that anything larger than the passed-in size will have to be returned
-  using the system LV and so performance will suffer.
-
-  The status return will be negated and passed back to the originating node.
-
-  pre- and post- command routines are called only on the local node. The
-  purpose is primarily to get and release locks, though the pre- routine should
-  also do any other local setups required by the command (if any) and can
-  return a failure code that prevents the command from being distributed around
-  the cluster
-
-  The pre- and post- routines are run in their own thread so can block as long
-  they like, do_command is run in the main clvmd thread so should not block for
-  too long. If the pre-command returns an error code (!=0) then the command
-  will not be propogated around the cluster but the post-command WILL be called
-
-  Also note that the pre and post routine are *always* called on the local
-  node, even if the command to be executed was only requested to run on a
-  remote node. It may peek inside the client structure to check the status of
-  the command.
-
-  The clients of the daemon must, naturally, understand the return messages and
-  codes.
-
-  Routines in here may only READ the values in the client structure passed in
-  apart from client->private which they are free to do what they like with.
-
-*/
-
-#include "clvmd-common.h"
-#include "clvmd-comms.h"
-#include "clvm.h"
-#include "clvmd.h"
-#include "lvm-globals.h"
-#include "lvm-functions.h"
-
-#include "locking.h"
-
-#include <sys/utsname.h>
-
-extern struct cluster_ops *clops;
-static int restart_clvmd(void);
-
-/* This is where all the real work happens:
-   NOTE: client will be NULL when this is executed on a remote node */
-int do_command(struct local_client *client, struct clvm_header *msg, int msglen,
-	       char **buf, int buflen, int *retlen)
-{
-	char *args = msg->node + strlen(msg->node) + 1;
-	int arglen = msglen - sizeof(struct clvm_header) - strlen(msg->node);
-	int status = 0;
-	char *lockname;
-	const char *locktype;
-	struct utsname nodeinfo;
-	unsigned char lock_cmd;
-	unsigned char lock_flags;
-
-	/* Do the command */
-	switch (msg->cmd) {
-		/* Just a test message */
-	case CLVMD_CMD_TEST:
-		if (arglen > buflen) {
-			char *new_buf;
-			buflen = arglen + 200;
-			new_buf = realloc(*buf, buflen);
-			if (new_buf == NULL) {
-				status = errno;
-				free (*buf);
-			}
-			*buf = new_buf;
-		}
-		if (*buf) {
-			if (uname(&nodeinfo))
-				memset(&nodeinfo, 0, sizeof(nodeinfo));
-
-			*retlen = 1 + dm_snprintf(*buf, buflen,
-						  "TEST from %s: %s v%s",
-						  nodeinfo.nodename, args,
-						  nodeinfo.release);
-		}
-		break;
-
-	case CLVMD_CMD_LOCK_VG:
-		lock_cmd = args[0];
-		lock_flags = args[1];
-		lockname = &args[2];
-		/* Check to see if the VG is in use by LVM1 */
-		status = do_check_lvm1(lockname);
-		do_lock_vg(lock_cmd, lock_flags, lockname);
-		break;
-
-	case CLVMD_CMD_LOCK_LV:
-		/* This is the biggie */
-		lock_cmd = args[0];
-		lock_flags = args[1];
-		lockname = &args[2];
-		status = do_lock_lv(lock_cmd, lock_flags, lockname);
-		/* Replace EIO with something less scary */
-		if (status == EIO) {
-			*retlen = 1 + dm_snprintf(*buf, buflen, "%s",
-						  get_last_lvm_error());
-			return EIO;
-		}
-		break;
-
-	case CLVMD_CMD_LOCK_QUERY:
-		lockname = &args[2];
-		if (buflen < 3)
-			return EIO;
-		if ((locktype = do_lock_query(lockname)))
-			*retlen = 1 + dm_snprintf(*buf, buflen, "%s", locktype);
-		break;
-
-	case CLVMD_CMD_REFRESH:
-		do_refresh_cache();
-		break;
-
-	case CLVMD_CMD_SYNC_NAMES:
-		lvm_do_fs_unlock();
-		break;
-
-	case CLVMD_CMD_SET_DEBUG:
-		clvmd_set_debug((debug_t) args[0]);
-		break;
-
-	case CLVMD_CMD_RESTART:
-		status = restart_clvmd();
-		break;
-
-	case CLVMD_CMD_GET_CLUSTERNAME:
-		status = clops->get_cluster_name(*buf, buflen);
-		if (!status)
-			*retlen = strlen(*buf)+1;
-		break;
-
-	case CLVMD_CMD_VG_BACKUP:
-		/*
-		 * Do not run backup on local node, caller should do that.
-		 */
-		if (!client)
-			lvm_do_backup(&args[2]);
-		break;
-
-	default:
-		/* Won't get here because command is validated in pre_command */
-		break;
-	}
-
-	/* Check the status of the command and return the error text */
-	if (status) {
-		*retlen = 1 + ((*buf) ? dm_snprintf(*buf, buflen, "%s",
-						    strerror(status)) : -1);
-	}
-
-	return status;
-}
-
-static int lock_vg(struct local_client *client)
-{
-	struct dm_hash_table *lock_hash;
-	struct clvm_header *header =
-		(struct clvm_header *) client->bits.localsock.cmd;
-	unsigned char lock_cmd;
-	int lock_mode;
-	char *args = header->node + strlen(header->node) + 1;
-	int lkid;
-	int status;
-	char *lockname;
-
-	/*
-	 * Keep a track of VG locks in our own hash table. In current
-	 * practice there should only ever be more than two VGs locked
-	 * if a user tries to merge lots of them at once
-	 */
-	if (!client->bits.localsock.private) {
-		if (!(lock_hash = dm_hash_create(3)))
-			return ENOMEM;
-		client->bits.localsock.private = (void *) lock_hash;
-	} else
-		lock_hash = (struct dm_hash_table *) client->bits.localsock.private;
-
-	lock_cmd = args[0] & (LCK_NONBLOCK | LCK_HOLD | LCK_SCOPE_MASK | LCK_TYPE_MASK);
-	lock_mode = ((int) lock_cmd & LCK_TYPE_MASK);
-	/* lock_flags = args[1]; */
-	lockname = &args[2];
-	DEBUGLOG("doing PRE command LOCK_VG '%s' at %x (client=%p)\n", lockname, lock_cmd, client);
-
-	if (lock_mode == LCK_UNLOCK) {
-		if (!(lkid = (int) (long) dm_hash_lookup(lock_hash, lockname)))
-			return EINVAL;
-
-		if ((status = sync_unlock(lockname, lkid)))
-			status = errno;
-		else
-			dm_hash_remove(lock_hash, lockname);
-	} else {
-		/* Read locks need to be PR; other modes get passed through */
-		if (lock_mode == LCK_READ)
-			lock_mode = LCK_PREAD;
-
-		if ((status = sync_lock(lockname, lock_mode, (lock_cmd & LCK_NONBLOCK) ? LCKF_NOQUEUE : 0, &lkid)))
-			status = errno;
-		else if (!dm_hash_insert(lock_hash, lockname, (void *) (long) lkid))
-			return ENOMEM;
-	}
-
-	return status;
-}
-
-
-/* Pre-command is a good place to get locks that are needed only for the duration
-   of the commands around the cluster (don't forget to free them in post-command),
-   and to sanity check the command arguments */
-int do_pre_command(struct local_client *client)
-{
-	struct clvm_header *header =
-	    (struct clvm_header *) client->bits.localsock.cmd;
-	unsigned char lock_cmd;
-	unsigned char lock_flags;
-	char *args = header->node + strlen(header->node) + 1;
-	int lockid = 0;
-	int status = 0;
-	char *lockname;
-
-	switch (header->cmd) {
-	case CLVMD_CMD_TEST:
-		status = sync_lock("CLVMD_TEST", LCK_EXCL, 0, &lockid);
-		client->bits.localsock.private = (void *)(long)lockid;
-		break;
-
-	case CLVMD_CMD_LOCK_VG:
-		lockname = &args[2];
-		/* We take out a real lock unless LCK_CACHE was set */
-		if (!strncmp(lockname, "V_", 2) ||
-		    !strncmp(lockname, "P_#", 3))
-			status = lock_vg(client);
-		break;
-
-	case CLVMD_CMD_LOCK_LV:
-		lock_cmd = args[0];
-		lock_flags = args[1];
-		lockname = &args[2];
-		status = pre_lock_lv(lock_cmd, lock_flags, lockname);
-		break;
-
-	case CLVMD_CMD_REFRESH:
-	case CLVMD_CMD_GET_CLUSTERNAME:
-	case CLVMD_CMD_SET_DEBUG:
-	case CLVMD_CMD_VG_BACKUP:
-	case CLVMD_CMD_SYNC_NAMES:
-	case CLVMD_CMD_LOCK_QUERY:
-	case CLVMD_CMD_RESTART:
-		break;
-
-	default:
-		log_error("Unknown command %d received\n", header->cmd);
-		status = EINVAL;
-	}
-	return status;
-}
-
-/* Note that the post-command routine is called even if the pre-command or the real command
-   failed */
-int do_post_command(struct local_client *client)
-{
-	struct clvm_header *header =
-	    (struct clvm_header *) client->bits.localsock.cmd;
-	int status = 0;
-	unsigned char lock_cmd;
-	unsigned char lock_flags;
-	char *args = header->node + strlen(header->node) + 1;
-	char *lockname;
-
-	switch (header->cmd) {
-	case CLVMD_CMD_TEST:
-		status = sync_unlock("CLVMD_TEST", (int) (long) client->bits.localsock.private);
-		client->bits.localsock.private = NULL;
-		break;
-
-	case CLVMD_CMD_LOCK_LV:
-		lock_cmd = args[0];
-		lock_flags = args[1];
-		lockname = &args[2];
-		status = post_lock_lv(lock_cmd, lock_flags, lockname);
-		break;
-
-	default:
-		/* Nothing to do here */
-		break;
-	}
-	return status;
-}
-
-
-/* Called when the client is about to be deleted */
-void cmd_client_cleanup(struct local_client *client)
-{
-	struct dm_hash_node *v;
-	struct dm_hash_table *lock_hash;
-	int lkid;
-	char *lockname;
-
-	DEBUGLOG("Client thread cleanup (%p)\n", client);
-	if (!client->bits.localsock.private)
-		return;
-
-	lock_hash = (struct dm_hash_table *)client->bits.localsock.private;
-
-	dm_hash_iterate(v, lock_hash) {
-		lkid = (int)(long)dm_hash_get_data(lock_hash, v);
-		lockname = dm_hash_get_key(lock_hash, v);
-		DEBUGLOG("Cleanup (%p): Unlocking lock %s %x\n", client, lockname, lkid);
-		(void) sync_unlock(lockname, lkid);
-	}
-
-	dm_hash_destroy(lock_hash);
-	client->bits.localsock.private = NULL;
-}
-
-static int restart_clvmd(void)
-{
-	const char **argv;
-	char *lv_name;
-	int argc = 0, max_locks = 0;
-	struct dm_hash_node *hn = NULL;
-	char debug_arg[16];
-	const char *clvmd = getenv("LVM_CLVMD_BINARY") ? : CLVMD_PATH;
-
-	DEBUGLOG("clvmd restart requested\n");
-
-	/* Count exclusively-open LVs */
-	do {
-		hn = get_next_excl_lock(hn, &lv_name);
-		if (lv_name) {
-			max_locks++;
-			if (!*lv_name)
-				break; /* FIXME: Is this error ? */
-		}
-	} while (hn);
-
-	/* clvmd + locks (-E uuid) + debug (-d X) + NULL */
-	if (!(argv = malloc((max_locks * 2 + 6) * sizeof(*argv))))
-		goto_out;
-
-	/*
-	 * Build the command-line
-	 */
-	argv[argc++] = "clvmd";
-
-	/* Propagate debug options */
-	if (clvmd_get_debug()) {
-		if (dm_snprintf(debug_arg, sizeof(debug_arg), "-d%u", clvmd_get_debug()) < 0)
-			goto_out;
-		argv[argc++] = debug_arg;
-	}
-
-	/* Propagate foreground options */
-	if (clvmd_get_foreground())
-		argv[argc++] = "-f";
-
-	argv[argc++] = "-I";
-	argv[argc++] = clops->name;
-
-	/* Now add the exclusively-open LVs */
-	hn = NULL;
-	do {
-		hn = get_next_excl_lock(hn, &lv_name);
-		if (lv_name) {
-			if (!*lv_name)
-				break; /* FIXME: Is this error ? */
-			argv[argc++] = "-E";
-			argv[argc++] = lv_name;
-			DEBUGLOG("excl lock: %s\n", lv_name);
-		}
-	} while (hn);
-	argv[argc] = NULL;
-
-	/* Exec new clvmd */
-	DEBUGLOG("--- Restarting %s ---\n", clvmd);
-	for (argc = 1; argv[argc]; argc++) DEBUGLOG("--- %d: %s\n", argc, argv[argc]);
-
-	/* NOTE: This will fail when downgrading! */
-	execvp(clvmd, (char **)argv);
-out:
-	/* We failed */
-	DEBUGLOG("Restart of clvmd failed.\n");
-
-	free(argv);
-
-	return EIO;
-}

daemons/clvmd/clvmd-common.h

@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2010 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * This file must be included first by every clvmd source file.
- */
-#ifndef _LVM_CLVMD_COMMON_H
-#define _LVM_CLVMD_COMMON_H
-
-#define _REENTRANT
-
-#include "tool.h"
-
-#include "lvm-logging.h"
-
-#endif

daemons/clvmd/clvmd-comms.h

@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * Abstraction layer for clvmd cluster communications
- */
-
-#ifndef _CLVMD_COMMS_H
-#define _CLVMD_COMMS_H
-
-struct local_client;
-
-struct cluster_ops {
-	const char *name;
-	void (*cluster_init_completed) (void);
-
-	int (*cluster_send_message) (const void *buf, int msglen,
-				     const char *csid,
-				     const char *errtext);
-	int (*name_from_csid) (const char *csid, char *name);
-	int (*csid_from_name) (char *csid, const char *name);
-	int (*get_num_nodes) (void);
-	int (*cluster_fd_callback) (struct local_client *fd, char *buf, int len,
-				    const char *csid,
-				    struct local_client **new_client);
-	int (*get_main_cluster_fd) (void);	/* gets accept FD or cman cluster socket */
-	int (*cluster_do_node_callback) (struct local_client *client,
-					 void (*callback) (struct local_client *,
-							   const char *csid,
-							   int node_up));
-	int (*is_quorate) (void);
-
-	void (*get_our_csid) (char *csid);
-	void (*add_up_node) (const char *csid);
-	void (*reread_config) (void);
-	void (*cluster_closedown) (void);
-
-	int (*get_cluster_name)(char *buf, int buflen);
-
-	int (*sync_lock) (const char *resource, int mode,
-			  int flags, int *lockid);
-	int (*sync_unlock) (const char *resource, int lockid);
-
-};
-
-#ifdef USE_CMAN
-#  include <netinet/in.h>
-#  include "libcman.h"
-#  define CMAN_MAX_CSID_LEN 4
-#  ifndef MAX_CSID_LEN
-#    define MAX_CSID_LEN CMAN_MAX_CSID_LEN
-#  endif
-#  undef MAX_CLUSTER_MEMBER_NAME_LEN
-#  define MAX_CLUSTER_MEMBER_NAME_LEN   CMAN_MAX_NODENAME_LEN
-#  define CMAN_MAX_CLUSTER_MESSAGE 1500
-#  define CLUSTER_PORT_CLVMD 11
-struct cluster_ops *init_cman_cluster(void);
-#endif
-
-#ifdef USE_OPENAIS
-#  include <openais/saAis.h>
-#  include <corosync/totem/totem.h>
-#  define OPENAIS_CSID_LEN (sizeof(int))
-#  define OPENAIS_MAX_CLUSTER_MESSAGE         MESSAGE_SIZE_MAX
-#  define OPENAIS_MAX_CLUSTER_MEMBER_NAME_LEN SA_MAX_NAME_LENGTH
-#  ifndef MAX_CLUSTER_MEMBER_NAME_LEN
-#    define MAX_CLUSTER_MEMBER_NAME_LEN       SA_MAX_NAME_LENGTH
-#  endif
-#  ifndef CMAN_MAX_CLUSTER_MESSAGE
-#    define CMAN_MAX_CLUSTER_MESSAGE          MESSAGE_SIZE_MAX
-#  endif
-#  ifndef MAX_CSID_LEN
-#    define MAX_CSID_LEN sizeof(int)
-#  endif
-struct cluster_ops *init_openais_cluster(void);
-#endif
-
-#ifdef USE_COROSYNC
-#  include <corosync/corotypes.h>
-#  define COROSYNC_CSID_LEN (sizeof(int))
-#  define COROSYNC_MAX_CLUSTER_MESSAGE         65535
-#  define COROSYNC_MAX_CLUSTER_MEMBER_NAME_LEN CS_MAX_NAME_LENGTH
-#  ifndef MAX_CLUSTER_MEMBER_NAME_LEN
-#    define MAX_CLUSTER_MEMBER_NAME_LEN       CS_MAX_NAME_LENGTH
-#  endif
-#  ifndef CMAN_MAX_CLUSTER_MESSAGE
-#    define CMAN_MAX_CLUSTER_MESSAGE          65535
-#  endif
-#  ifndef MAX_CSID_LEN
-#    define MAX_CSID_LEN sizeof(int)
-#  endif
-struct cluster_ops *init_corosync_cluster(void);
-#endif
-
-#ifdef USE_SINGLENODE
-#  define SINGLENODE_CSID_LEN (sizeof(int))
-#  ifndef MAX_CLUSTER_MEMBER_NAME_LEN
-#    define MAX_CLUSTER_MEMBER_NAME_LEN       64
-#  endif
-#  define SINGLENODE_MAX_CLUSTER_MESSAGE          65535
-#  ifndef MAX_CSID_LEN
-#    define MAX_CSID_LEN sizeof(int)
-#  endif
-struct cluster_ops *init_singlenode_cluster(void);
-#endif
-
-#endif

daemons/clvmd/clvmd-corosync.c

@@ -1,658 +0,0 @@
-/*
- * Copyright (C) 2009-2012 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * This provides the interface between clvmd and corosync/DLM as the cluster
- * and lock manager.
- */
-
-#include "clvmd-common.h"
-
-#include <pthread.h>
-
-#include "clvm.h"
-#include "clvmd-comms.h"
-#include "clvmd.h"
-#include "lvm-functions.h"
-
-#include "locking.h"
-
-#include <corosync/cpg.h>
-#include <corosync/quorum.h>
-
-#ifdef HAVE_COROSYNC_CONFDB_H
-#  include <corosync/confdb.h>
-#elif defined HAVE_COROSYNC_CMAP_H
-#  include <corosync/cmap.h>
-#else
-#  error "Either HAVE_COROSYNC_CONFDB_H or HAVE_COROSYNC_CMAP_H must be defined."
-#endif
-
-#include <libdlm.h>
-
-#include <syslog.h>
-
-/* Timeout value for several corosync calls */
-#define LOCKSPACE_NAME "clvmd"
-
-static void corosync_cpg_deliver_callback (cpg_handle_t handle,
-				  const struct cpg_name *groupName,
-				  uint32_t nodeid,
-				  uint32_t pid,
-				  void *msg,
-				  size_t msg_len);
-static void corosync_cpg_confchg_callback(cpg_handle_t handle,
-				 const struct cpg_name *groupName,
-				 const struct cpg_address *member_list, size_t member_list_entries,
-				 const struct cpg_address *left_list, size_t left_list_entries,
-				 const struct cpg_address *joined_list, size_t joined_list_entries);
-static void _cluster_closedown(void);
-
-/* Hash list of nodes in the cluster */
-static struct dm_hash_table *node_hash;
-
-/* Number of active nodes */
-static int num_nodes;
-static unsigned int our_nodeid;
-
-static struct local_client *cluster_client;
-
-/* Corosync handles */
-static cpg_handle_t cpg_handle;
-static quorum_handle_t quorum_handle;
-
-/* DLM Handle */
-static dlm_lshandle_t *lockspace;
-
-static struct cpg_name cpg_group_name;
-
-/* Corosync callback structs */
-cpg_callbacks_t corosync_cpg_callbacks = {
-	.cpg_deliver_fn =            corosync_cpg_deliver_callback,
-	.cpg_confchg_fn =            corosync_cpg_confchg_callback,
-};
-
-quorum_callbacks_t quorum_callbacks = {
-	.quorum_notify_fn = NULL,
-};
-
-struct node_info
-{
-	enum {NODE_DOWN, NODE_CLVMD} state;
-	int nodeid;
-};
-
-
-/* Set errno to something approximating the right value and return 0 or -1 */
-static int cs_to_errno(cs_error_t err)
-{
-	switch(err)
-	{
-	case CS_OK:
-		return 0;
-        case CS_ERR_LIBRARY:
-		errno = EINVAL;
-		break;
-        case CS_ERR_VERSION:
-		errno = EINVAL;
-		break;
-        case CS_ERR_INIT:
-		errno = EINVAL;
-		break;
-        case CS_ERR_TIMEOUT:
-		errno = ETIME;
-		break;
-        case CS_ERR_TRY_AGAIN:
-		errno = EAGAIN;
-		break;
-        case CS_ERR_INVALID_PARAM:
-		errno = EINVAL;
-		break;
-        case CS_ERR_NO_MEMORY:
-		errno = ENOMEM;
-		break;
-        case CS_ERR_BAD_HANDLE:
-		errno = EINVAL;
-		break;
-        case CS_ERR_BUSY:
-		errno = EBUSY;
-		break;
-        case CS_ERR_ACCESS:
-		errno = EPERM;
-		break;
-        case CS_ERR_NOT_EXIST:
-		errno = ENOENT;
-		break;
-        case CS_ERR_NAME_TOO_LONG:
-		errno = ENAMETOOLONG;
-		break;
-        case CS_ERR_EXIST:
-		errno = EEXIST;
-		break;
-        case CS_ERR_NO_SPACE:
-		errno = ENOSPC;
-		break;
-        case CS_ERR_INTERRUPT:
-		errno = EINTR;
-		break;
-	case CS_ERR_NAME_NOT_FOUND:
-		errno = ENOENT;
-		break;
-        case CS_ERR_NO_RESOURCES:
-		errno = ENOMEM;
-		break;
-        case CS_ERR_NOT_SUPPORTED:
-		errno = EOPNOTSUPP;
-		break;
-        case CS_ERR_BAD_OPERATION:
-		errno = EINVAL;
-		break;
-        case CS_ERR_FAILED_OPERATION:
-		errno = EIO;
-		break;
-        case CS_ERR_MESSAGE_ERROR:
-		errno = EIO;
-		break;
-        case CS_ERR_QUEUE_FULL:
-		errno = EXFULL;
-		break;
-        case CS_ERR_QUEUE_NOT_AVAILABLE:
-		errno = EINVAL;
-		break;
-        case CS_ERR_BAD_FLAGS:
-		errno = EINVAL;
-		break;
-        case CS_ERR_TOO_BIG:
-		errno = E2BIG;
-		break;
-        case CS_ERR_NO_SECTIONS:
-		errno = ENOMEM;
-		break;
-	default:
-		errno = EINVAL;
-		break;
-	}
-	return -1;
-}
-
-static char *print_corosync_csid(const char *csid)
-{
-	static char buf[128];
-	int id;
-
-	memcpy(&id, csid, sizeof(int));
-	sprintf(buf, "%d", id);
-	return buf;
-}
-
-static void corosync_cpg_deliver_callback (cpg_handle_t handle,
-				  const struct cpg_name *groupName,
-				  uint32_t nodeid,
-				  uint32_t pid,
-				  void *msg,
-				  size_t msg_len)
-{
-	int target_nodeid;
-
-	memcpy(&target_nodeid, msg, COROSYNC_CSID_LEN);
-
-	DEBUGLOG("%u got message from nodeid %d for %d. len %zd\n",
-		 our_nodeid, nodeid, target_nodeid, msg_len-4);
-
-	if (nodeid != our_nodeid)
-		if (target_nodeid == our_nodeid || target_nodeid == 0)
-			process_message(cluster_client, (char *)msg+COROSYNC_CSID_LEN,
-					msg_len-COROSYNC_CSID_LEN, (char*)&nodeid);
-}
-
-static void corosync_cpg_confchg_callback(cpg_handle_t handle,
-				 const struct cpg_name *groupName,
-				 const struct cpg_address *member_list, size_t member_list_entries,
-				 const struct cpg_address *left_list, size_t left_list_entries,
-				 const struct cpg_address *joined_list, size_t joined_list_entries)
-{
-	int i;
-	struct node_info *ninfo;
-
-	DEBUGLOG("confchg callback. %zd joined, %zd left, %zd members\n",
-		 joined_list_entries, left_list_entries, member_list_entries);
-
-	for (i=0; i<joined_list_entries; i++) {
-		ninfo = dm_hash_lookup_binary(node_hash,
-					      (char *)&joined_list[i].nodeid,
-					      COROSYNC_CSID_LEN);
-		if (!ninfo) {
-			ninfo = malloc(sizeof(struct node_info));
-			if (!ninfo) {
-				break;
-			}
-			else {
-				ninfo->nodeid = joined_list[i].nodeid;
-				dm_hash_insert_binary(node_hash,
-						      (char *)&ninfo->nodeid,
-						      COROSYNC_CSID_LEN, ninfo);
-			}
-		}
-		ninfo->state = NODE_CLVMD;
-	}
-
-	for (i=0; i<left_list_entries; i++) {
-		ninfo = dm_hash_lookup_binary(node_hash,
-					      (char *)&left_list[i].nodeid,
-					      COROSYNC_CSID_LEN);
-		if (ninfo)
-			ninfo->state = NODE_DOWN;
-	}
-
-	num_nodes = member_list_entries;
-}
-
-static int _init_cluster(void)
-{
-	cs_error_t err;
-
-#ifdef QUORUM_SET	/* corosync/quorum.h */
-	uint32_t quorum_type;
-#endif
-
-	node_hash = dm_hash_create(100);
-
-	err = cpg_initialize(&cpg_handle,
-			     &corosync_cpg_callbacks);
-	if (err != CS_OK) {
-		syslog(LOG_ERR, "Cannot initialise Corosync CPG service: %d",
-		       err);
-		DEBUGLOG("Cannot initialise Corosync CPG service: %d", err);
-		return cs_to_errno(err);
-	}
-
-#ifdef QUORUM_SET
-	err = quorum_initialize(&quorum_handle,
-				&quorum_callbacks,
-				&quorum_type);
-
-	if (quorum_type != QUORUM_SET) {
-		syslog(LOG_ERR, "Corosync quorum service is not configured");
-		DEBUGLOG("Corosync quorum service is not configured");
-		return EINVAL;
-	}
-#else
-	err = quorum_initialize(&quorum_handle,
-				&quorum_callbacks);
-#endif
-
-	if (err != CS_OK) {
-		syslog(LOG_ERR, "Cannot initialise Corosync quorum service: %d",
-		       err);
-		DEBUGLOG("Cannot initialise Corosync quorum service: %d", err);
-		return cs_to_errno(err);
-	}
-
-	/* Create a lockspace for LV & VG locks to live in */
-	lockspace = dlm_open_lockspace(LOCKSPACE_NAME);
-	if (!lockspace) {
-		lockspace = dlm_create_lockspace(LOCKSPACE_NAME, 0600);
-		if (!lockspace) {
-			syslog(LOG_ERR, "Unable to create DLM lockspace for CLVM: %m");
-			return -1;
-		}
-		DEBUGLOG("Created DLM lockspace for CLVMD.\n");
-	} else
-		DEBUGLOG("Opened existing DLM lockspace for CLVMD.\n");
-
-	dlm_ls_pthread_init(lockspace);
-	DEBUGLOG("DLM initialisation complete\n");
-
-	/* Connect to the clvmd group */
-	strcpy((char *)cpg_group_name.value, "clvmd");
-	cpg_group_name.length = strlen((char *)cpg_group_name.value);
-	err = cpg_join(cpg_handle, &cpg_group_name);
-	if (err != CS_OK) {
-		cpg_finalize(cpg_handle);
-		quorum_finalize(quorum_handle);
-		dlm_release_lockspace(LOCKSPACE_NAME, lockspace, 1);
-		syslog(LOG_ERR, "Cannot join clvmd process group");
-		DEBUGLOG("Cannot join clvmd process group: %d\n", err);
-		return cs_to_errno(err);
-	}
-
-	err = cpg_local_get(cpg_handle,
-			    &our_nodeid);
-	if (err != CS_OK) {
-		cpg_finalize(cpg_handle);
-		quorum_finalize(quorum_handle);
-		dlm_release_lockspace(LOCKSPACE_NAME, lockspace, 1);
-		syslog(LOG_ERR, "Cannot get local node id\n");
-		return cs_to_errno(err);
-	}
-	DEBUGLOG("Our local node id is %d\n", our_nodeid);
-
-	DEBUGLOG("Connected to Corosync\n");
-
-	return 0;
-}
-
-static void _cluster_closedown(void)
-{
-	dlm_release_lockspace(LOCKSPACE_NAME, lockspace, 1);
-	cpg_finalize(cpg_handle);
-	quorum_finalize(quorum_handle);
-}
-
-static void _get_our_csid(char *csid)
-{
-	memcpy(csid, &our_nodeid, sizeof(int));
-}
-
-/* Corosync doesn't really have nmode names so we
-   just use the node ID in hex instead */
-static int _csid_from_name(char *csid, const char *name)
-{
-	int nodeid;
-	struct node_info *ninfo;
-
-	if (sscanf(name, "%x", &nodeid) == 1) {
-		ninfo = dm_hash_lookup_binary(node_hash, csid, COROSYNC_CSID_LEN);
-		if (ninfo)
-			return nodeid;
-	}
-	return -1;
-}
-
-static int _name_from_csid(const char *csid, char *name)
-{
-	struct node_info *ninfo;
-
-	ninfo = dm_hash_lookup_binary(node_hash, csid, COROSYNC_CSID_LEN);
-	if (!ninfo)
-	{
-		sprintf(name, "UNKNOWN %s", print_corosync_csid(csid));
-		return -1;
-	}
-
-	sprintf(name, "%x", ninfo->nodeid);
-	return 0;
-}
-
-static int _get_num_nodes(void)
-{
-	DEBUGLOG("num_nodes = %d\n", num_nodes);
-	return num_nodes;
-}
-
-/* Node is now known to be running a clvmd */
-static void _add_up_node(const char *csid)
-{
-	struct node_info *ninfo;
-
-	ninfo = dm_hash_lookup_binary(node_hash, csid, COROSYNC_CSID_LEN);
-	if (!ninfo) {
-		DEBUGLOG("corosync_add_up_node no node_hash entry for csid %s\n",
-			 print_corosync_csid(csid));
-		return;
-	}
-
-	DEBUGLOG("corosync_add_up_node %d\n", ninfo->nodeid);
-
-	ninfo->state = NODE_CLVMD;
-
-	return;
-}
-
-/* Call a callback for each node, so the caller knows whether it's up or down */
-static int _cluster_do_node_callback(struct local_client *master_client,
-				     void (*callback)(struct local_client *,
-						      const char *csid, int node_up))
-{
-	struct dm_hash_node *hn;
-	struct node_info *ninfo;
-
-	dm_hash_iterate(hn, node_hash)
-	{
-		char csid[COROSYNC_CSID_LEN];
-
-		ninfo = dm_hash_get_data(node_hash, hn);
-		memcpy(csid, dm_hash_get_key(node_hash, hn), COROSYNC_CSID_LEN);
-
-		DEBUGLOG("down_callback. node %d, state = %d\n", ninfo->nodeid,
-			 ninfo->state);
-
-		if (ninfo->state == NODE_CLVMD)
-			callback(master_client, csid, 1);
-	}
-	return 0;
-}
-
-/* Real locking */
-static int _lock_resource(const char *resource, int mode, int flags, int *lockid)
-{
-	struct dlm_lksb lksb;
-	int err;
-
-	DEBUGLOG("lock_resource '%s', flags=%d, mode=%d\n", resource, flags, mode);
-
-	if (flags & LKF_CONVERT)
-		lksb.sb_lkid = *lockid;
-
-	err = dlm_ls_lock_wait(lockspace,
-			       mode,
-			       &lksb,
-			       flags,
-			       resource,
-			       strlen(resource),
-			       0,
-			       NULL, NULL, NULL);
-
-	if (err != 0)
-	{
-		DEBUGLOG("dlm_ls_lock returned %d\n", errno);
-		return err;
-	}
-	if (lksb.sb_status != 0)
-	{
-		DEBUGLOG("dlm_ls_lock returns lksb.sb_status %d\n", lksb.sb_status);
-		errno = lksb.sb_status;
-		return -1;
-	}
-
-	DEBUGLOG("lock_resource returning %d, lock_id=%x\n", err, lksb.sb_lkid);
-
-	*lockid = lksb.sb_lkid;
-
-	return 0;
-}
-
-
-static int _unlock_resource(const char *resource, int lockid)
-{
-	struct dlm_lksb lksb;
-	int err;
-
-	DEBUGLOG("unlock_resource: %s lockid: %x\n", resource, lockid);
-	lksb.sb_lkid = lockid;
-
-	err = dlm_ls_unlock_wait(lockspace,
-				 lockid,
-				 0,
-				 &lksb);
-	if (err != 0)
-	{
-		DEBUGLOG("Unlock returned %d\n", err);
-		return err;
-	}
-	if (lksb.sb_status != EUNLOCK)
-	{
-		DEBUGLOG("dlm_ls_unlock_wait returns lksb.sb_status: %d\n", lksb.sb_status);
-		errno = lksb.sb_status;
-		return -1;
-	}   
-
-
-	return 0;
-}
-
-static int _is_quorate(void)
-{
-	int quorate;
-	if (quorum_getquorate(quorum_handle, &quorate) == CS_OK)
-		return quorate;
-	else
-		return 0;
-}
-
-static int _get_main_cluster_fd(void)
-{
-	int select_fd;
-
-	cpg_fd_get(cpg_handle, &select_fd);
-	return select_fd;
-}
-
-static int _cluster_fd_callback(struct local_client *fd, char *buf, int len,
-				const char *csid,
-				struct local_client **new_client)
-{
-	cluster_client = fd;
-	*new_client = NULL;
-	cpg_dispatch(cpg_handle, CS_DISPATCH_ONE);
-	return 1;
-}
-
-static int _cluster_send_message(const void *buf, int msglen, const char *csid,
-				 const char *errtext)
-{
-	struct iovec iov[2];
-	cs_error_t err;
-	int target_node;
-
-	if (csid)
-		memcpy(&target_node, csid, COROSYNC_CSID_LEN);
-	else
-		target_node = 0;
-
-	iov[0].iov_base = &target_node;
-	iov[0].iov_len = sizeof(int);
-	iov[1].iov_base = (char *)buf;
-	iov[1].iov_len = msglen;
-
-	err = cpg_mcast_joined(cpg_handle, CPG_TYPE_AGREED, iov, 2);
-	return cs_to_errno(err);
-}
-
-#ifdef HAVE_COROSYNC_CONFDB_H
-/*
- * We are not necessarily connected to a Red Hat Cluster system,
- * but if we are, this returns the cluster name from cluster.conf.
- * I've used confdb rather than ccs to reduce the inter-package
- * dependancies as well as to allow people to set a cluster name
- * for themselves even if they are not running on RH cluster.
- */
-static int _get_cluster_name(char *buf, int buflen)
-{
-	confdb_handle_t handle;
-	int result;
-	size_t namelen = buflen;
-	hdb_handle_t cluster_handle;
-	confdb_callbacks_t callbacks = {
-		.confdb_key_change_notify_fn = NULL,
-		.confdb_object_create_change_notify_fn = NULL,
-		.confdb_object_delete_change_notify_fn = NULL
-	};
-
-	/* This is a default in case everything else fails */
-	strncpy(buf, "Corosync", buflen);
-
-	/* Look for a cluster name in confdb */
-	result = confdb_initialize (&handle, &callbacks);
-        if (result != CS_OK)
-		return 0;
-
-        result = confdb_object_find_start(handle, OBJECT_PARENT_HANDLE);
-	if (result != CS_OK)
-		goto out;
-
-        result = confdb_object_find(handle, OBJECT_PARENT_HANDLE, (void *)"cluster", strlen("cluster"), &cluster_handle);
-        if (result != CS_OK)
-		goto out;
-
-        result = confdb_key_get(handle, cluster_handle, (void *)"name", strlen("name"), buf, &namelen);
-        if (result != CS_OK)
-		goto out;
-
-	buf[namelen] = '\0';
-
-out:
-	confdb_finalize(handle);
-	return 0;
-}
-
-#elif defined HAVE_COROSYNC_CMAP_H
-
-static int _get_cluster_name(char *buf, int buflen)
-{
-	cmap_handle_t cmap_handle = 0;
-	int result;
-	char *name = NULL;
-
-	/* This is a default in case everything else fails */
-	strncpy(buf, "Corosync", buflen);
-
-	/* Look for a cluster name in cmap */
-	result = cmap_initialize(&cmap_handle);
-	if (result != CS_OK)
-		return 0;
-
-	result = cmap_get_string(cmap_handle, "totem.cluster_name", &name);
-	if (result != CS_OK)
-		goto out;
-
-	memset(buf, 0, buflen);
-	strncpy(buf, name, buflen - 1);
-
-out:
-	if (name)
-		free(name);
-	cmap_finalize(cmap_handle);
-	return 0;
-}
-
-#endif
-
-static struct cluster_ops _cluster_corosync_ops = {
-	.name                     = "corosync",
-	.cluster_init_completed   = NULL,
-	.cluster_send_message     = _cluster_send_message,
-	.name_from_csid           = _name_from_csid,
-	.csid_from_name           = _csid_from_name,
-	.get_num_nodes            = _get_num_nodes,
-	.cluster_fd_callback      = _cluster_fd_callback,
-	.get_main_cluster_fd      = _get_main_cluster_fd,
-	.cluster_do_node_callback = _cluster_do_node_callback,
-	.is_quorate               = _is_quorate,
-	.get_our_csid             = _get_our_csid,
-	.add_up_node              = _add_up_node,
-	.reread_config            = NULL,
-	.cluster_closedown        = _cluster_closedown,
-	.get_cluster_name         = _get_cluster_name,
-	.sync_lock                = _lock_resource,
-	.sync_unlock              = _unlock_resource,
-};
-
-struct cluster_ops *init_corosync_cluster(void)
-{
-	if (!_init_cluster())
-		return &_cluster_corosync_ops;
-	else
-		return NULL;
-}

daemons/clvmd/clvmd-openais.c

@@ -1,689 +0,0 @@
-/*
- * Copyright (C) 2007-2009 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * This provides the interface between clvmd and OpenAIS as the cluster
- * and lock manager.
- */
-
-#include "clvmd-common.h"
-
-#include <pthread.h>
-#include <fcntl.h>
-#include <syslog.h>
-
-#include <openais/saAis.h>
-#include <openais/saLck.h>
-
-#include <corosync/corotypes.h>
-#include <corosync/cpg.h>
-
-#include "locking.h"
-#include "clvm.h"
-#include "clvmd-comms.h"
-#include "lvm-functions.h"
-#include "clvmd.h"
-
-/* Timeout value for several openais calls */
-#define TIMEOUT 10
-
-static void openais_cpg_deliver_callback (cpg_handle_t handle,
-				  const struct cpg_name *groupName,
-				  uint32_t nodeid,
-				  uint32_t pid,
-				  void *msg,
-				  size_t msg_len);
-static void openais_cpg_confchg_callback(cpg_handle_t handle,
-				 const struct cpg_name *groupName,
-				 const struct cpg_address *member_list, size_t member_list_entries,
-				 const struct cpg_address *left_list, size_t left_list_entries,
-				 const struct cpg_address *joined_list, size_t joined_list_entries);
-
-static void _cluster_closedown(void);
-
-/* Hash list of nodes in the cluster */
-static struct dm_hash_table *node_hash;
-
-/* For associating lock IDs & resource handles */
-static struct dm_hash_table *lock_hash;
-
-/* Number of active nodes */
-static int num_nodes;
-static unsigned int our_nodeid;
-
-static struct local_client *cluster_client;
-
-/* OpenAIS handles */
-static cpg_handle_t cpg_handle;
-static SaLckHandleT lck_handle;
-
-static struct cpg_name cpg_group_name;
-
-/* Openais callback structs */
-cpg_callbacks_t openais_cpg_callbacks = {
-	.cpg_deliver_fn =            openais_cpg_deliver_callback,
-	.cpg_confchg_fn =            openais_cpg_confchg_callback,
-};
-
-struct node_info
-{
-	enum {NODE_UNKNOWN, NODE_DOWN, NODE_UP, NODE_CLVMD} state;
-	int nodeid;
-};
-
-struct lock_info
-{
-	SaLckResourceHandleT res_handle;
-	SaLckLockIdT         lock_id;
-	SaNameT              lock_name;
-};
-
-/* Set errno to something approximating the right value and return 0 or -1 */
-static int ais_to_errno(SaAisErrorT err)
-{
-	switch(err)
-	{
-	case SA_AIS_OK:
-		return 0;
-        case SA_AIS_ERR_LIBRARY:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_VERSION:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_INIT:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_TIMEOUT:
-		errno = ETIME;
-		break;
-        case SA_AIS_ERR_TRY_AGAIN:
-		errno = EAGAIN;
-		break;
-        case SA_AIS_ERR_INVALID_PARAM:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_NO_MEMORY:
-		errno = ENOMEM;
-		break;
-        case SA_AIS_ERR_BAD_HANDLE:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_BUSY:
-		errno = EBUSY;
-		break;
-        case SA_AIS_ERR_ACCESS:
-		errno = EPERM;
-		break;
-        case SA_AIS_ERR_NOT_EXIST:
-		errno = ENOENT;
-		break;
-        case SA_AIS_ERR_NAME_TOO_LONG:
-		errno = ENAMETOOLONG;
-		break;
-        case SA_AIS_ERR_EXIST:
-		errno = EEXIST;
-		break;
-        case SA_AIS_ERR_NO_SPACE:
-		errno = ENOSPC;
-		break;
-        case SA_AIS_ERR_INTERRUPT:
-		errno = EINTR;
-		break;
-	case SA_AIS_ERR_NAME_NOT_FOUND:
-		errno = ENOENT;
-		break;
-        case SA_AIS_ERR_NO_RESOURCES:
-		errno = ENOMEM;
-		break;
-        case SA_AIS_ERR_NOT_SUPPORTED:
-		errno = EOPNOTSUPP;
-		break;
-        case SA_AIS_ERR_BAD_OPERATION:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_FAILED_OPERATION:
-		errno = EIO;
-		break;
-        case SA_AIS_ERR_MESSAGE_ERROR:
-		errno = EIO;
-		break;
-        case SA_AIS_ERR_QUEUE_FULL:
-		errno = EXFULL;
-		break;
-        case SA_AIS_ERR_QUEUE_NOT_AVAILABLE:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_BAD_FLAGS:
-		errno = EINVAL;
-		break;
-        case SA_AIS_ERR_TOO_BIG:
-		errno = E2BIG;
-		break;
-        case SA_AIS_ERR_NO_SECTIONS:
-		errno = ENOMEM;
-		break;
-	default:
-		errno = EINVAL;
-		break;
-	}
-	return -1;
-}
-
-static char *print_openais_csid(const char *csid)
-{
-	static char buf[128];
-	int id;
-
-	memcpy(&id, csid, sizeof(int));
-	sprintf(buf, "%d", id);
-	return buf;
-}
-
-static int add_internal_client(int fd, fd_callback_t callback)
-{
-	struct local_client *client;
-
-	DEBUGLOG("Add_internal_client, fd = %d\n", fd);
-
-	if (!(client = dm_zalloc(sizeof(*client)))) {
-		DEBUGLOG("malloc failed\n");
-		return -1;
-	}
-
-	client->fd = fd;
-	client->type = CLUSTER_INTERNAL;
-	client->callback = callback;
-	add_client(client);
-
-	/* Set Close-on-exec */
-	fcntl(fd, F_SETFD, 1);
-
-	return 0;
-}
-
-static void openais_cpg_deliver_callback (cpg_handle_t handle,
-				  const struct cpg_name *groupName,
-				  uint32_t nodeid,
-				  uint32_t pid,
-				  void *msg,
-				  size_t msg_len)
-{
-	int target_nodeid;
-
-	memcpy(&target_nodeid, msg, OPENAIS_CSID_LEN);
-
-	DEBUGLOG("%u got message from nodeid %d for %d. len %" PRIsize_t "\n",
-		 our_nodeid, nodeid, target_nodeid, msg_len-4);
-
-	if (nodeid != our_nodeid)
-		if (target_nodeid == our_nodeid || target_nodeid == 0)
-			process_message(cluster_client, (char *)msg+OPENAIS_CSID_LEN,
-					msg_len-OPENAIS_CSID_LEN, (char*)&nodeid);
-}
-
-static void openais_cpg_confchg_callback(cpg_handle_t handle,
-				 const struct cpg_name *groupName,
-				 const struct cpg_address *member_list, size_t member_list_entries,
-				 const struct cpg_address *left_list, size_t left_list_entries,
-				 const struct cpg_address *joined_list, size_t joined_list_entries)
-{
-	int i;
-	struct node_info *ninfo;
-
-	DEBUGLOG("confchg callback. %" PRIsize_t " joined, "
-		 FMTsize_t " left, %" PRIsize_t " members\n",
-		 joined_list_entries, left_list_entries, member_list_entries);
-
-	for (i=0; i<joined_list_entries; i++) {
-		ninfo = dm_hash_lookup_binary(node_hash,
-					      (char *)&joined_list[i].nodeid,
-					      OPENAIS_CSID_LEN);
-		if (!ninfo) {
-			ninfo = malloc(sizeof(struct node_info));
-			if (!ninfo) {
-				break;
-			}
-			else {
-				ninfo->nodeid = joined_list[i].nodeid;
-				dm_hash_insert_binary(node_hash,
-						      (char *)&ninfo->nodeid,
-						      OPENAIS_CSID_LEN, ninfo);
-			}
-		}
-		ninfo->state = NODE_CLVMD;
-	}
-
-	for (i=0; i<left_list_entries; i++) {
-		ninfo = dm_hash_lookup_binary(node_hash,
-					      (char *)&left_list[i].nodeid,
-					      OPENAIS_CSID_LEN);
-		if (ninfo)
-			ninfo->state = NODE_DOWN;
-	}
-
-	for (i=0; i<member_list_entries; i++) {
-		if (member_list[i].nodeid == 0) continue;
-		ninfo = dm_hash_lookup_binary(node_hash,
-				(char *)&member_list[i].nodeid,
-				OPENAIS_CSID_LEN);
-		if (!ninfo) {
-			ninfo = malloc(sizeof(struct node_info));
-			if (!ninfo) {
-				break;
-			}
-			else {
-				ninfo->nodeid = member_list[i].nodeid;
-				dm_hash_insert_binary(node_hash,
-						(char *)&ninfo->nodeid,
-						OPENAIS_CSID_LEN, ninfo);
-			}
-		}
-		ninfo->state = NODE_CLVMD;
-	}
-
-	num_nodes = member_list_entries;
-}
-
-static int lck_dispatch(struct local_client *client, char *buf, int len,
-			const char *csid, struct local_client **new_client)
-{
-	*new_client = NULL;
-	saLckDispatch(lck_handle, SA_DISPATCH_ONE);
-	return 1;
-}
-
-static int _init_cluster(void)
-{
-	SaAisErrorT err;
-	SaVersionT  ver = { 'B', 1, 1 };
-	int select_fd;
-
-	node_hash = dm_hash_create(100);
-	lock_hash = dm_hash_create(10);
-
-	err = cpg_initialize(&cpg_handle,
-			     &openais_cpg_callbacks);
-	if (err != SA_AIS_OK) {
-		syslog(LOG_ERR, "Cannot initialise OpenAIS CPG service: %d",
-		       err);
-		DEBUGLOG("Cannot initialise OpenAIS CPG service: %d", err);
-		return ais_to_errno(err);
-	}
-
-	err = saLckInitialize(&lck_handle,
-					NULL,
-			      &ver);
-	if (err != SA_AIS_OK) {
-		cpg_initialize(&cpg_handle, &openais_cpg_callbacks);
-		syslog(LOG_ERR, "Cannot initialise OpenAIS lock service: %d",
-		       err);
-		DEBUGLOG("Cannot initialise OpenAIS lock service: %d\n\n", err);
-		return ais_to_errno(err);
-	}
-
-	/* Connect to the clvmd group */
-	strcpy((char *)cpg_group_name.value, "clvmd");
-	cpg_group_name.length = strlen((char *)cpg_group_name.value);
-	err = cpg_join(cpg_handle, &cpg_group_name);
-	if (err != SA_AIS_OK) {
-		cpg_finalize(cpg_handle);
-		saLckFinalize(lck_handle);
-		syslog(LOG_ERR, "Cannot join clvmd process group");
-		DEBUGLOG("Cannot join clvmd process group: %d\n", err);
-		return ais_to_errno(err);
-	}
-
-	err = cpg_local_get(cpg_handle,
-			    &our_nodeid);
-	if (err != SA_AIS_OK) {
-		cpg_finalize(cpg_handle);
-		saLckFinalize(lck_handle);
-		syslog(LOG_ERR, "Cannot get local node id\n");
-		return ais_to_errno(err);
-	}
-	DEBUGLOG("Our local node id is %d\n", our_nodeid);
-
-	saLckSelectionObjectGet(lck_handle, (SaSelectionObjectT *)&select_fd);
-	add_internal_client(select_fd, lck_dispatch);
-
-	DEBUGLOG("Connected to OpenAIS\n");
-
-	return 0;
-}
-
-static void _cluster_closedown(void)
-{
-	saLckFinalize(lck_handle);
-	cpg_finalize(cpg_handle);
-}
-
-static void _get_our_csid(char *csid)
-{
-	memcpy(csid, &our_nodeid, sizeof(int));
-}
-
-/* OpenAIS doesn't really have nmode names so we
-   just use the node ID in hex instead */
-static int _csid_from_name(char *csid, const char *name)
-{
-	int nodeid;
-	struct node_info *ninfo;
-
-	if (sscanf(name, "%x", &nodeid) == 1) {
-		ninfo = dm_hash_lookup_binary(node_hash, csid, OPENAIS_CSID_LEN);
-		if (ninfo)
-			return nodeid;
-	}
-	return -1;
-}
-
-static int _name_from_csid(const char *csid, char *name)
-{
-	struct node_info *ninfo;
-
-	ninfo = dm_hash_lookup_binary(node_hash, csid, OPENAIS_CSID_LEN);
-	if (!ninfo)
-	{
-		sprintf(name, "UNKNOWN %s", print_openais_csid(csid));
-		return -1;
-	}
-
-	sprintf(name, "%x", ninfo->nodeid);
-	return 0;
-}
-
-static int _get_num_nodes()
-{
-	DEBUGLOG("num_nodes = %d\n", num_nodes);
-	return num_nodes;
-}
-
-/* Node is now known to be running a clvmd */
-static void _add_up_node(const char *csid)
-{
-	struct node_info *ninfo;
-
-	ninfo = dm_hash_lookup_binary(node_hash, csid, OPENAIS_CSID_LEN);
-	if (!ninfo) {
-		DEBUGLOG("openais_add_up_node no node_hash entry for csid %s\n",
-			 print_openais_csid(csid));
-		return;
-	}
-
-	DEBUGLOG("openais_add_up_node %d\n", ninfo->nodeid);
-
-	ninfo->state = NODE_CLVMD;
-
-	return;
-}
-
-/* Call a callback for each node, so the caller knows whether it's up or down */
-static int _cluster_do_node_callback(struct local_client *master_client,
-				     void (*callback)(struct local_client *,
-						      const char *csid, int node_up))
-{
-	struct dm_hash_node *hn;
-	struct node_info *ninfo;
-	int somedown = 0;
-
-	dm_hash_iterate(hn, node_hash)
-	{
-		char csid[OPENAIS_CSID_LEN];
-
-		ninfo = dm_hash_get_data(node_hash, hn);
-		memcpy(csid, dm_hash_get_key(node_hash, hn), OPENAIS_CSID_LEN);
-
-		DEBUGLOG("down_callback. node %d, state = %d\n", ninfo->nodeid,
-			 ninfo->state);
-
-		if (ninfo->state != NODE_DOWN)
-			callback(master_client, csid, ninfo->state == NODE_CLVMD);
-		if (ninfo->state != NODE_CLVMD)
-			somedown = -1;
-	}
-	return somedown;
-}
-
-/* Real locking */
-static int _lock_resource(char *resource, int mode, int flags, int *lockid)
-{
-	struct lock_info *linfo;
-	SaLckResourceHandleT res_handle;
-	SaAisErrorT err;
-	SaLckLockIdT lock_id;
-	SaLckLockStatusT lockStatus;
-
-	/* This needs to be converted from DLM/LVM2 value for OpenAIS LCK */
-	if (flags & LCK_NONBLOCK) flags = SA_LCK_LOCK_NO_QUEUE;
-
-	linfo = malloc(sizeof(struct lock_info));
-	if (!linfo)
-		return -1;
-
-	DEBUGLOG("lock_resource '%s', flags=%d, mode=%d\n", resource, flags, mode);
-
-	linfo->lock_name.length = strlen(resource)+1;
-	strcpy((char *)linfo->lock_name.value, resource);
-
-	err = saLckResourceOpen(lck_handle, &linfo->lock_name,
-				SA_LCK_RESOURCE_CREATE, TIMEOUT, &res_handle);
-	if (err != SA_AIS_OK)
-	{
-		DEBUGLOG("ResourceOpen returned %d\n", err);
-		free(linfo);
-		return ais_to_errno(err);
-	}
-
-	err = saLckResourceLock(
-			res_handle,
-			&lock_id,
-			mode,
-			flags,
-			0,
-			SA_TIME_END,
-			&lockStatus);
-	if (err != SA_AIS_OK && lockStatus != SA_LCK_LOCK_GRANTED)
-	{
-		free(linfo);
-		saLckResourceClose(res_handle);
-		return ais_to_errno(err);
-	}
-
-	/* Wait for it to complete */
-
-	DEBUGLOG("lock_resource returning %d, lock_id=%" PRIx64 "\n",
-		 err, lock_id);
-
-	linfo->lock_id = lock_id;
-	linfo->res_handle = res_handle;
-
-	dm_hash_insert(lock_hash, resource, linfo);
-
-	return ais_to_errno(err);
-}
-
-
-static int _unlock_resource(char *resource, int lockid)
-{
-	SaAisErrorT err;
-	struct lock_info *linfo;
-
-	DEBUGLOG("unlock_resource %s\n", resource);
-	linfo = dm_hash_lookup(lock_hash, resource);
-	if (!linfo)
-		return 0;
-
-	DEBUGLOG("unlock_resource: lockid: %" PRIx64 "\n", linfo->lock_id);
-	err = saLckResourceUnlock(linfo->lock_id, SA_TIME_END);
-	if (err != SA_AIS_OK)
-	{
-		DEBUGLOG("Unlock returned %d\n", err);
-		return ais_to_errno(err);
-	}
-
-	/* Release the resource */
-	dm_hash_remove(lock_hash, resource);
-	saLckResourceClose(linfo->res_handle);
-	free(linfo);
-
-	return ais_to_errno(err);
-}
-
-static int _sync_lock(const char *resource, int mode, int flags, int *lockid)
-{
-	int status;
-	char lock1[strlen(resource)+3];
-	char lock2[strlen(resource)+3];
-
-	snprintf(lock1, sizeof(lock1), "%s-1", resource);
-	snprintf(lock2, sizeof(lock2), "%s-2", resource);
-
-	switch (mode)
-	{
-	case LCK_EXCL:
-		status = _lock_resource(lock1, SA_LCK_EX_LOCK_MODE, flags, lockid);
-		if (status)
-			goto out;
-
-		/* If we can't get this lock too then bail out */
-		status = _lock_resource(lock2, SA_LCK_EX_LOCK_MODE, LCK_NONBLOCK,
-					lockid);
-		if (status == SA_LCK_LOCK_NOT_QUEUED)
-		{
-			_unlock_resource(lock1, *lockid);
-			status = -1;
-			errno = EAGAIN;
-		}
-		break;
-
-	case LCK_PREAD:
-	case LCK_READ:
-		status = _lock_resource(lock1, SA_LCK_PR_LOCK_MODE, flags, lockid);
-		if (status)
-			goto out;
-		_unlock_resource(lock2, *lockid);
-		break;
-
-	case LCK_WRITE:
-		status = _lock_resource(lock2, SA_LCK_EX_LOCK_MODE, flags, lockid);
-		if (status)
-			goto out;
-		_unlock_resource(lock1, *lockid);
-		break;
-
-	default:
-		status = -1;
-		errno = EINVAL;
-		break;
-	}
-out:
-	*lockid = mode;
-	return status;
-}
-
-static int _sync_unlock(const char *resource, int lockid)
-{
-	int status = 0;
-	char lock1[strlen(resource)+3];
-	char lock2[strlen(resource)+3];
-
-	snprintf(lock1, sizeof(lock1), "%s-1", resource);
-	snprintf(lock2, sizeof(lock2), "%s-2", resource);
-
-	_unlock_resource(lock1, lockid);
-	_unlock_resource(lock2, lockid);
-
-	return status;
-}
-
-/* We are always quorate ! */
-static int _is_quorate()
-{
-	return 1;
-}
-
-static int _get_main_cluster_fd(void)
-{
-	int select_fd;
-
-	cpg_fd_get(cpg_handle, &select_fd);
-	return select_fd;
-}
-
-static int _cluster_fd_callback(struct local_client *fd, char *buf, int len,
-				const char *csid,
-				struct local_client **new_client)
-{
-	cluster_client = fd;
-	*new_client = NULL;
-	cpg_dispatch(cpg_handle, SA_DISPATCH_ONE);
-	return 1;
-}
-
-static int _cluster_send_message(const void *buf, int msglen, const char *csid,
-				 const char *errtext)
-{
-	struct iovec iov[2];
-	SaAisErrorT err;
-	int target_node;
-
-	if (csid)
-		memcpy(&target_node, csid, OPENAIS_CSID_LEN);
-	else
-		target_node = 0;
-
-	iov[0].iov_base = &target_node;
-	iov[0].iov_len = sizeof(int);
-	iov[1].iov_base = (char *)buf;
-	iov[1].iov_len = msglen;
-
-	err = cpg_mcast_joined(cpg_handle, CPG_TYPE_AGREED, iov, 2);
-	return ais_to_errno(err);
-}
-
-/* We don't have a cluster name to report here */
-static int _get_cluster_name(char *buf, int buflen)
-{
-	strncpy(buf, "OpenAIS", buflen);
-	return 0;
-}
-
-static struct cluster_ops _cluster_openais_ops = {
-	.name                     = "openais",
-	.cluster_init_completed   = NULL,
-	.cluster_send_message     = _cluster_send_message,
-	.name_from_csid           = _name_from_csid,
-	.csid_from_name           = _csid_from_name,
-	.get_num_nodes            = _get_num_nodes,
-	.cluster_fd_callback      = _cluster_fd_callback,
-	.get_main_cluster_fd      = _get_main_cluster_fd,
-	.cluster_do_node_callback = _cluster_do_node_callback,
-	.is_quorate               = _is_quorate,
-	.get_our_csid             = _get_our_csid,
-	.add_up_node              = _add_up_node,
-	.reread_config            = NULL,
-	.cluster_closedown        = _cluster_closedown,
-	.get_cluster_name         = _get_cluster_name,
-	.sync_lock                = _sync_lock,
-	.sync_unlock              = _sync_unlock,
-};
-
-struct cluster_ops *init_openais_cluster(void)
-{
-	if (!_init_cluster())
-		return &_cluster_openais_ops;
-
-	return NULL;
-}

daemons/clvmd/clvmd-singlenode.c

@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2009-2013 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "clvmd-common.h"
-
-#include <pthread.h>
-
-#include "locking.h"
-#include "clvm.h"
-#include "clvmd-comms.h"
-#include "clvmd.h"
-
-#include <sys/un.h>
-#include <sys/socket.h>
-#include <fcntl.h>
-
-static const char SINGLENODE_CLVMD_SOCKNAME[] = DEFAULT_RUN_DIR "/clvmd_singlenode.sock";
-static int listen_fd = -1;
-
-static struct dm_hash_table *_locks;
-static int _lockid;
-
-static pthread_mutex_t _lock_mutex = PTHREAD_MUTEX_INITIALIZER;
-/* Using one common condition for all locks for simplicity */
-static pthread_cond_t _lock_cond = PTHREAD_COND_INITIALIZER;
-
-struct lock {
-	struct dm_list list;
-	int lockid;
-	int mode;
-};
-
-static void close_comms(void)
-{
-	if (listen_fd != -1 && close(listen_fd))
-		stack;
-	(void)unlink(SINGLENODE_CLVMD_SOCKNAME);
-	listen_fd = -1;
-}
-
-static int init_comms(void)
-{
-	mode_t old_mask;
-	struct sockaddr_un addr = { .sun_family = AF_UNIX };
-
-	if (!dm_strncpy(addr.sun_path, SINGLENODE_CLVMD_SOCKNAME,
-			sizeof(addr.sun_path))) {
-		DEBUGLOG("%s: singlenode socket name too long.",
-			 SINGLENODE_CLVMD_SOCKNAME);
-		return -1;
-	}
-
-	close_comms();
-
-	(void) dm_prepare_selinux_context(SINGLENODE_CLVMD_SOCKNAME, S_IFSOCK);
-	old_mask = umask(0077);
-
-	listen_fd = socket(PF_UNIX, SOCK_STREAM, 0);
-	if (listen_fd < 0) {
-		DEBUGLOG("Can't create local socket: %s\n", strerror(errno));
-		goto error;
-	}
-	/* Set Close-on-exec */
-	if (fcntl(listen_fd, F_SETFD, 1)) {
-		DEBUGLOG("Setting CLOEXEC on client fd failed: %s\n", strerror(errno));
-		goto error;
-	}
-
-	if (bind(listen_fd, (struct sockaddr *)&addr, sizeof(addr)) < 0) {
-		DEBUGLOG("Can't bind local socket: %s\n", strerror(errno));
-		goto error;
-	}
-	if (listen(listen_fd, 10) < 0) {
-		DEBUGLOG("Can't listen local socket: %s\n", strerror(errno));
-		goto error;
-	}
-
-	umask(old_mask);
-	(void) dm_prepare_selinux_context(NULL, 0);
-	return 0;
-error:
-	umask(old_mask);
-	(void) dm_prepare_selinux_context(NULL, 0);
-	close_comms();
-	return -1;
-}
-
-static int _init_cluster(void)
-{
-	int r;
-
-	if (!(_locks = dm_hash_create(128))) {
-		DEBUGLOG("Failed to allocate single-node hash table.\n");
-		return 1;
-	}
-
-	r = init_comms();
-	if (r) {
-		dm_hash_destroy(_locks);
-		_locks = NULL;
-		return r;
-	}
-
-	DEBUGLOG("Single-node cluster initialised.\n");
-	return 0;
-}
-
-static void _cluster_closedown(void)
-{
-	close_comms();
-
-	/* If there is any awaited resource, kill it softly */
-	pthread_mutex_lock(&_lock_mutex);
-	dm_hash_destroy(_locks);
-	_locks = NULL;
-	_lockid = 0;
-	pthread_cond_broadcast(&_lock_cond); /* wakeup waiters */
-	pthread_mutex_unlock(&_lock_mutex);
-}
-
-static void _get_our_csid(char *csid)
-{
-	int nodeid = 1;
-	memcpy(csid, &nodeid, sizeof(int));
-}
-
-static int _csid_from_name(char *csid, const char *name)
-{
-	return 1;
-}
-
-static int _name_from_csid(const char *csid, char *name)
-{
-	strcpy(name, "SINGLENODE");
-	return 0;
-}
-
-static int _get_num_nodes(void)
-{
-	return 1;
-}
-
-/* Node is now known to be running a clvmd */
-static void _add_up_node(const char *csid)
-{
-}
-
-/* Call a callback for each node, so the caller knows whether it's up or down */
-static int _cluster_do_node_callback(struct local_client *master_client,
-				     void (*callback)(struct local_client *,
-				     const char *csid, int node_up))
-{
-	return 0;
-}
-
-int _lock_file(const char *file, uint32_t flags);
-
-static const char *_get_mode(int mode)
-{
-	switch (mode) {
-	case LCK_NULL: return "NULL";
-	case LCK_READ: return "READ";
-	case LCK_PREAD: return "PREAD";
-	case LCK_WRITE: return "WRITE";
-	case LCK_EXCL: return "EXCLUSIVE";
-	case LCK_UNLOCK: return "UNLOCK";
-	default: return "????";
-	}
-}
-
-/* Real locking */
-static int _lock_resource(const char *resource, int mode, int flags, int *lockid)
-{
-	/* DLM table of allowed transition states */
-	static const int _dlm_table[6][6] = {
-	/* Mode	   NL	CR	CW	PR	PW	EX */
-	/* NL */ { 1,	 1,	 1,	 1,	 1,	 1},
-	/* CR */ { 1,	 1,	 1,	 1,	 1,	 0},
-	/* CW */ { 1,	 1,	 1,	 0,	 0,	 0},
-	/* PR */ { 1,	 1,	 0,	 1,	 0,	 0},
-	/* PW */ { 1,	 1,	 0,	 0,	 0,	 0},
-	/* EX */ { 1,	 0,	 0,	 0,	 0,	 0}
-	};
-
-	struct lock *lck = NULL, *lckt;
-	struct dm_list *head;
-
-	DEBUGLOG("Locking resource %s, flags=0x%02x (%s%s%s), mode=%s (%d)\n",
-		 resource, flags,
-		 (flags & LCKF_NOQUEUE) ? "NOQUEUE" : "",
-		 ((flags & (LCKF_NOQUEUE | LCKF_CONVERT)) ==
-		  (LCKF_NOQUEUE | LCKF_CONVERT)) ? "|" : "",
-		 (flags & LCKF_CONVERT) ? "CONVERT" : "",
-		 _get_mode(mode), mode);
-
-	mode &= LCK_TYPE_MASK;
-	pthread_mutex_lock(&_lock_mutex);
-
-retry:
-	if (!(head = dm_hash_lookup(_locks, resource))) {
-		if (flags & LCKF_CONVERT) {
-			/* In real DLM, lock is identified only by lockid, resource is not used */
-			DEBUGLOG("Unlocked resource %s cannot be converted\n", resource);
-			goto_bad;
-		}
-		/* Add new locked resource */
-		if (!(head = dm_malloc(sizeof(struct dm_list))) ||
-		    !dm_hash_insert(_locks, resource, head)) {
-			dm_free(head);
-			goto_bad;
-		}
-
-		dm_list_init(head);
-	} else	/* Update/convert locked resource */
-		dm_list_iterate_items(lck, head) {
-			/* Check is all locks are compatible with requested lock */
-			if (flags & LCKF_CONVERT) {
-				if (lck->lockid != *lockid)
-					continue;
-
-				DEBUGLOG("Converting resource %s lockid=%d mode:%s -> %s...\n",
-					 resource, lck->lockid, _get_mode(lck->mode), _get_mode(mode));
-				dm_list_iterate_items(lckt, head) {
-					if ((lckt->lockid != *lockid) &&
-					    !_dlm_table[mode][lckt->mode]) {
-						if (!(flags & LCKF_NOQUEUE) &&
-						    /* TODO: Real dlm uses here conversion queues */
-						    !pthread_cond_wait(&_lock_cond, &_lock_mutex) &&
-						    _locks) /* End of the game? */
-							goto retry;
-						goto bad;
-					}
-				}
-				lck->mode = mode; /* Lock is now converted */
-				goto out;
-			} else if (!_dlm_table[mode][lck->mode]) {
-				DEBUGLOG("Resource %s already locked lockid=%d, mode:%s\n",
-					 resource, lck->lockid, _get_mode(lck->mode));
-				if (!(flags & LCKF_NOQUEUE) &&
-				    !pthread_cond_wait(&_lock_cond, &_lock_mutex) &&
-				    _locks) { /* End of the game? */
-					DEBUGLOG("Resource %s retrying lock in mode:%s...\n",
-						 resource, _get_mode(mode));
-					goto retry;
-				}
-				goto bad;
-			}
-		}
-
-	if (!(flags & LCKF_CONVERT)) {
-		if (!(lck = dm_malloc(sizeof(struct lock))))
-			goto_bad;
-
-		*lockid = lck->lockid = ++_lockid;
-		lck->mode = mode;
-		dm_list_add(head, &lck->list);
-	}
-out:
-	pthread_cond_broadcast(&_lock_cond); /* to wakeup waiters */
-	pthread_mutex_unlock(&_lock_mutex);
-	DEBUGLOG("Locked resource %s, lockid=%d, mode=%s\n",
-		 resource, lck->lockid, _get_mode(lck->mode));
-
-	return 0;
-bad:
-	pthread_cond_broadcast(&_lock_cond); /* to wakeup waiters */
-	pthread_mutex_unlock(&_lock_mutex);
-	DEBUGLOG("Failed to lock resource %s\n", resource);
-
-	return 1; /* fail */
-}
-
-static int _unlock_resource(const char *resource, int lockid)
-{
-	struct lock *lck;
-	struct dm_list *head;
-	int r = 1;
-
-	if (lockid < 0) {
-		DEBUGLOG("Not tracking unlock of lockid -1: %s, lockid=%d\n",
-			 resource, lockid);
-		return 1;
-	}
-
-	DEBUGLOG("Unlocking resource %s, lockid=%d\n", resource, lockid);
-	pthread_mutex_lock(&_lock_mutex);
-	pthread_cond_broadcast(&_lock_cond); /* wakeup waiters */
-
-	if (!(head = dm_hash_lookup(_locks, resource))) {
-		pthread_mutex_unlock(&_lock_mutex);
-		DEBUGLOG("Resource %s is not locked.\n", resource);
-		return 1;
-	}
-
-	dm_list_iterate_items(lck, head)
-		if (lck->lockid == lockid) {
-			dm_list_del(&lck->list);
-			dm_free(lck);
-			r = 0;
-			goto out;
-		}
-
-	DEBUGLOG("Resource %s has wrong lockid %d.\n", resource, lockid);
-out:
-	if (dm_list_empty(head)) {
-		//DEBUGLOG("Resource %s is no longer hashed (lockid=%d).\n", resource, lockid);
-		dm_hash_remove(_locks, resource);
-		dm_free(head);
-	}
-
-	pthread_mutex_unlock(&_lock_mutex);
-
-	return r;
-}
-
-static int _is_quorate(void)
-{
-	return 1;
-}
-
-static int _get_main_cluster_fd(void)
-{
-	return listen_fd;
-}
-
-static int _cluster_fd_callback(struct local_client *fd, char *buf, int len,
-				const char *csid,
-				struct local_client **new_client)
-{
-	return 1;
-}
-
-static int _cluster_send_message(const void *buf, int msglen,
-				 const char *csid,
-				 const char *errtext)
-{
-	return 0;
-}
-
-static int _get_cluster_name(char *buf, int buflen)
-{
-	return dm_strncpy(buf, "localcluster", buflen) ? 0 : 1;
-}
-
-static struct cluster_ops _cluster_singlenode_ops = {
-	.name                     = "singlenode",
-	.cluster_init_completed   = NULL,
-	.cluster_send_message     = _cluster_send_message,
-	.name_from_csid           = _name_from_csid,
-	.csid_from_name           = _csid_from_name,
-	.get_num_nodes            = _get_num_nodes,
-	.cluster_fd_callback      = _cluster_fd_callback,
-	.get_main_cluster_fd      = _get_main_cluster_fd,
-	.cluster_do_node_callback = _cluster_do_node_callback,
-	.is_quorate               = _is_quorate,
-	.get_our_csid             = _get_our_csid,
-	.add_up_node              = _add_up_node,
-	.reread_config            = NULL,
-	.cluster_closedown        = _cluster_closedown,
-	.get_cluster_name         = _get_cluster_name,
-	.sync_lock                = _lock_resource,
-	.sync_unlock              = _unlock_resource,
-};
-
-struct cluster_ops *init_singlenode_cluster(void)
-{
-	if (!_init_cluster())
-		return &_cluster_singlenode_ops;
-
-	return NULL;
-}

daemons/clvmd/clvmd.h

@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _CLVMD_H
-#define _CLVMD_H
-
-#define CLVMD_MAJOR_VERSION 0
-#define CLVMD_MINOR_VERSION 2
-#define CLVMD_PATCH_VERSION 1
-
-/* Default time (in seconds) we will wait for all remote commands to execute
-   before declaring them dead */
-#define DEFAULT_CMD_TIMEOUT 60
-
-/* One of these for each reply we get from command execution on a node */
-struct node_reply {
-	char node[MAX_CLUSTER_MEMBER_NAME_LEN];
-	char *replymsg;
-	int status;
-	struct node_reply *next;
-};
-
-typedef enum {DEBUG_OFF, DEBUG_STDERR, DEBUG_SYSLOG} debug_t;
-
-/*
- * These exist for the use of local sockets only when we are
- * collecting responses from all cluster nodes
- */
-struct localsock_bits {
-	struct node_reply *replies;
-	int num_replies;
-	int expected_replies;
-	time_t sent_time;	/* So we can check for timeouts */
-	int in_progress;	/* Only execute one cmd at a time per client */
-	int sent_out;		/* Flag to indicate that a command was sent
-				   to remote nodes */
-	void *private;		/* Private area for command processor use */
-	void *cmd;		/* Whole command as passed down local socket */
-	int cmd_len;		/* Length of above */
-	int pipe;		/* Pipe to send PRE completion status down */
-	int finished;		/* Flag to tell subthread to exit */
-	int all_success;	/* Set to 0 if any node (or the pre_command)
-				   failed */
-	int cleanup_needed;     /* helper for cleanup_zombie */
-	struct local_client *pipe_client;
-	pthread_t threadid;
-	enum { PRE_COMMAND, POST_COMMAND } state;
-	pthread_mutex_t mutex;	/* Main thread and worker synchronisation */
-	pthread_cond_t cond;
-};
-
-/* Entries for PIPE clients */
-struct pipe_bits {
-	struct local_client *client;	/* Actual (localsock) client */
-	pthread_t threadid;		/* Our own copy of the thread id */
-};
-
-/* Entries for Network socket clients */
-struct netsock_bits {
-	void *private;
-	int flags;
-};
-
-typedef int (*fd_callback_t) (struct local_client * fd, char *buf, int len,
-			      const char *csid,
-			      struct local_client ** new_client);
-
-/* One of these for each fd we are listening on */
-struct local_client {
-	int fd;
-	enum { CLUSTER_MAIN_SOCK, CLUSTER_DATA_SOCK, LOCAL_RENDEZVOUS,
-		    LOCAL_SOCK, THREAD_PIPE, CLUSTER_INTERNAL } type;
-	struct local_client *next;
-	unsigned short xid;
-	fd_callback_t callback;
-	uint8_t removeme;
-
-	union {
-		struct localsock_bits localsock;
-		struct pipe_bits pipe;
-		struct netsock_bits net;
-	} bits;
-};
-
-#define DEBUGLOG(fmt, args...) debuglog(fmt, ## args)
-
-#ifndef max
-#define max(a,b) ((a)>(b)?(a):(b))
-#endif
-
-/* The real command processor is in clvmd-command.c */
-extern int do_command(struct local_client *client, struct clvm_header *msg,
-		      int msglen, char **buf, int buflen, int *retlen);
-
-/* Pre and post command routines are called only on the local node */
-extern int do_pre_command(struct local_client *client);
-extern int do_post_command(struct local_client *client);
-extern void cmd_client_cleanup(struct local_client *client);
-extern int add_client(struct local_client *new_client);
-
-extern void clvmd_cluster_init_completed(void);
-extern void process_message(struct local_client *client, char *buf,
-			    int len, const char *csid);
-extern void debuglog(const char *fmt, ... )
-  __attribute__ ((format(printf, 1, 2)));
-
-void clvmd_set_debug(debug_t new_de);
-debug_t clvmd_get_debug(void);
-int clvmd_get_foreground(void);
-
-int sync_lock(const char *resource, int mode, int flags, int *lockid);
-int sync_unlock(const char *resource, int lockid);
-
-#endif

daemons/clvmd/lvm-functions.c

@@ -1,939 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2012 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "clvmd-common.h"
-
-#include <pthread.h>
-
-#include "clvm.h"
-#include "clvmd-comms.h"
-#include "clvmd.h"
-#include "lvm-functions.h"
-
-/* LVM2 headers */
-#include "toolcontext.h"
-#include "lvmcache.h"
-#include "lvm-globals.h"
-#include "activate.h"
-#include "archiver.h"
-#include "memlock.h"
-
-#include <syslog.h>
-
-static struct cmd_context *cmd = NULL;
-static struct dm_hash_table *lv_hash = NULL;
-static pthread_mutex_t lv_hash_lock;
-static pthread_mutex_t lvm_lock;
-static char last_error[1024];
-
-struct lv_info {
-	int lock_id;
-	int lock_mode;
-};
-
-static const char *decode_full_locking_cmd(uint32_t cmdl)
-{
-	static char buf[128];
-	const char *type;
-	const char *scope;
-	const char *command;
-
-	switch (cmdl & LCK_TYPE_MASK) {
-	case LCK_NULL:
-		type = "NULL";
-		break;
-	case LCK_READ:
-		type = "READ";
-		break;
-	case LCK_PREAD:
-		type = "PREAD";
-		break;
-	case LCK_WRITE:
-		type = "WRITE";
-		break;
-	case LCK_EXCL:
-		type = "EXCL";
-		break;
-	case LCK_UNLOCK:
-		type = "UNLOCK";
-		break;
-	default:
-		type = "unknown";
-		break;
-	}
-
-	switch (cmdl & LCK_SCOPE_MASK) {
-	case LCK_VG:
-		scope = "VG";
-		command = "LCK_VG";
-		break;
-	case LCK_LV:
-		scope = "LV";
-		switch (cmdl & LCK_MASK) {
-		case LCK_LV_EXCLUSIVE & LCK_MASK:
-			command = "LCK_LV_EXCLUSIVE";
-			break;
-		case LCK_LV_SUSPEND & LCK_MASK:
-			command = "LCK_LV_SUSPEND";
-			break;
-		case LCK_LV_RESUME & LCK_MASK:
-			command = "LCK_LV_RESUME";
-			break;
-		case LCK_LV_ACTIVATE & LCK_MASK:
-			command = "LCK_LV_ACTIVATE";
-			break;
-		case LCK_LV_DEACTIVATE & LCK_MASK:
-			command = "LCK_LV_DEACTIVATE";
-			break;
-		default:
-			command = "unknown";
-			break;
-		}
-		break;
-	default:
-		scope = "unknown";
-		command = "unknown";
-		break;
-	}
-
-	sprintf(buf, "0x%x %s (%s|%s%s%s%s%s)", cmdl, command, type, scope,
-		cmdl & LCK_NONBLOCK   ? "|NONBLOCK" : "",
-		cmdl & LCK_HOLD       ? "|HOLD" : "",
-		cmdl & LCK_CLUSTER_VG ? "|CLUSTER_VG" : "",
-		cmdl & LCK_CACHE      ? "|CACHE" : "");
-
-	return buf;
-}
-
-/*
- * Only processes 8 bits: excludes LCK_CACHE.
- */
-static const char *decode_locking_cmd(unsigned char cmdl)
-{
-	return decode_full_locking_cmd((uint32_t) cmdl);
-}
-
-static const char *decode_flags(unsigned char flags)
-{
-	static char buf[128];
-	int len;
-
-	len = sprintf(buf, "0x%x ( %s%s%s%s%s%s%s%s)", flags,
-		flags & LCK_PARTIAL_MODE	  ? "PARTIAL_MODE|" : "",
-		flags & LCK_MIRROR_NOSYNC_MODE	  ? "MIRROR_NOSYNC|" : "",
-		flags & LCK_DMEVENTD_MONITOR_MODE ? "DMEVENTD_MONITOR|" : "",
-		flags & LCK_ORIGIN_ONLY_MODE ? "ORIGIN_ONLY|" : "",
-		flags & LCK_TEST_MODE ? "TEST|" : "",
-		flags & LCK_CONVERT_MODE ? "CONVERT|" : "",
-		flags & LCK_DMEVENTD_MONITOR_IGNORE ? "DMEVENTD_MONITOR_IGNORE|" : "",
-		flags & LCK_REVERT_MODE ? "REVERT|" : "");
-
-	if (len > 1)
-		buf[len - 2] = ' ';
-	else
-		buf[0] = '\0';
-
-	return buf;
-}
-
-char *get_last_lvm_error(void)
-{
-	return last_error;
-}
-
-/*
- * Hash lock info helpers
- */
-static struct lv_info *lookup_info(const char *resource)
-{
-	struct lv_info *lvi;
-
-	pthread_mutex_lock(&lv_hash_lock);
-	lvi = dm_hash_lookup(lv_hash, resource);
-	pthread_mutex_unlock(&lv_hash_lock);
-
-	return lvi;
-}
-
-static int insert_info(const char *resource, struct lv_info *lvi)
-{
-	int ret;
-
-	pthread_mutex_lock(&lv_hash_lock);
-	ret = dm_hash_insert(lv_hash, resource, lvi);
-	pthread_mutex_unlock(&lv_hash_lock);
-
-	return ret;
-}
-
-static void remove_info(const char *resource)
-{
-	int num_open;
-
-	pthread_mutex_lock(&lv_hash_lock);
-	dm_hash_remove(lv_hash, resource);
-
-	/* When last lock is remove, validate there are not left opened devices */
-	if (!dm_hash_get_first(lv_hash)) {
-		if (critical_section())
-			log_error(INTERNAL_ERROR "No volumes are locked however clvmd is in activation mode critical section.");
-		if ((num_open = dev_cache_check_for_open_devices()))
-			log_error(INTERNAL_ERROR "No volumes are locked however %d devices are still open.", num_open);
-	}
-
-	pthread_mutex_unlock(&lv_hash_lock);
-}
-
-/*
- * Return the mode a lock is currently held at (or -1 if not held)
- */
-static int get_current_lock(char *resource)
-{
-	struct lv_info *lvi;
-
-	if ((lvi = lookup_info(resource)))
-		return lvi->lock_mode;
-
-	return -1;
-}
-
-
-void init_lvhash(void)
-{
-	/* Create hash table for keeping LV locks & status */
-	lv_hash = dm_hash_create(1024);
-	pthread_mutex_init(&lv_hash_lock, NULL);
-	pthread_mutex_init(&lvm_lock, NULL);
-}
-
-/* Called at shutdown to tidy the lockspace */
-void destroy_lvhash(void)
-{
-	struct dm_hash_node *v;
-	struct lv_info *lvi;
-	char *resource;
-	int status;
-
-	pthread_mutex_lock(&lv_hash_lock);
-
-	dm_hash_iterate(v, lv_hash) {
-		lvi = dm_hash_get_data(lv_hash, v);
-		resource = dm_hash_get_key(lv_hash, v);
-
-		if ((status = sync_unlock(resource, lvi->lock_id)))
-			DEBUGLOG("unlock_all. unlock failed(%d): %s\n",
-				 status,  strerror(errno));
-		dm_free(lvi);
-	}
-
-	dm_hash_destroy(lv_hash);
-	lv_hash = NULL;
-
-	pthread_mutex_unlock(&lv_hash_lock);
-}
-
-/* Gets a real lock and keeps the info in the hash table */
-static int hold_lock(char *resource, int mode, int flags)
-{
-	int status;
-	int saved_errno;
-	struct lv_info *lvi;
-
-	/* Mask off invalid options */
-	flags &= LCKF_NOQUEUE | LCKF_CONVERT;
-
-	lvi = lookup_info(resource);
-
-	if (lvi) {
-		if (lvi->lock_mode == mode) {
-			DEBUGLOG("hold_lock, lock mode %d already held\n",
-				 mode);
-			return 0;
-		}
-		if ((lvi->lock_mode == LCK_EXCL) && (mode == LCK_WRITE)) {
-			DEBUGLOG("hold_lock, lock already held LCK_EXCL, "
-				 "ignoring LCK_WRITE request\n");
-			return 0;
-		}
-	}
-
-	/* Only allow explicit conversions */
-	if (lvi && !(flags & LCKF_CONVERT)) {
-		errno = EBUSY;
-		return -1;
-	}
-	if (lvi) {
-		/* Already exists - convert it */
-		status = sync_lock(resource, mode, flags, &lvi->lock_id);
-		saved_errno = errno;
-		if (!status)
-			lvi->lock_mode = mode;
-		else
-			DEBUGLOG("hold_lock. convert to %d failed: %s\n", mode,
-				 strerror(errno));
-		errno = saved_errno;
-	} else {
-		if (!(lvi = dm_malloc(sizeof(struct lv_info)))) {
-			errno = ENOMEM;
-			return -1;
-		}
-
-		lvi->lock_mode = mode;
-		lvi->lock_id = 0;
-		status = sync_lock(resource, mode, flags & ~LCKF_CONVERT, &lvi->lock_id);
-		saved_errno = errno;
-		if (status) {
-			dm_free(lvi);
-			DEBUGLOG("hold_lock. lock at %d failed: %s\n", mode,
-				 strerror(errno));
-		} else
-			if (!insert_info(resource, lvi)) {
-				errno = ENOMEM;
-				return -1;
-			}
-
-		errno = saved_errno;
-	}
-	return status;
-}
-
-/* Unlock and remove it from the hash table */
-static int hold_unlock(char *resource)
-{
-	struct lv_info *lvi;
-	int status;
-	int saved_errno;
-
-	if (!(lvi = lookup_info(resource))) {
-		DEBUGLOG("hold_unlock, lock not already held\n");
-		return 0;
-	}
-
-	status = sync_unlock(resource, lvi->lock_id);
-	saved_errno = errno;
-	if (!status) {
-		remove_info(resource);
-		dm_free(lvi);
-	} else {
-		DEBUGLOG("hold_unlock. unlock failed(%d): %s\n", status,
-			 strerror(errno));
-	}
-
-	errno = saved_errno;
-	return status;
-}
-
-/* Watch the return codes here.
-   liblvm API functions return 1(true) for success, 0(false) for failure and don't set errno.
-   libdlm API functions return 0 for success, -1 for failure and do set errno.
-   These functions here return 0 for success or >0 for failure (where the retcode is errno)
-*/
-
-/* Activate LV exclusive or non-exclusive */
-static int do_activate_lv(char *resource, unsigned char command, unsigned char lock_flags, int mode)
-{
-	int oldmode;
-	int status;
-	int activate_lv;
-	int exclusive = 0;
-	struct lvinfo lvi;
-
-	/* Is it already open ? */
-	oldmode = get_current_lock(resource);
-	if (oldmode == mode && (command & LCK_CLUSTER_VG)) {
-		DEBUGLOG("do_activate_lv, lock already held at %d\n", oldmode);
-		return 0;	/* Nothing to do */
-	}
-
-	/* Does the config file want us to activate this LV ? */
-	if (!lv_activation_filter(cmd, resource, &activate_lv, NULL))
-		return EIO;
-
-	if (!activate_lv)
-		return 0;	/* Success, we did nothing! */
-
-	/* Do we need to activate exclusively? */
-	if ((activate_lv == 2) || (mode == LCK_EXCL)) {
-		exclusive = 1;
-		mode = LCK_EXCL;
-	}
-
-	/*
-	 * Try to get the lock if it's a clustered volume group.
-	 * Use lock conversion only if requested, to prevent implicit conversion
-	 * of exclusive lock to shared one during activation.
-	 */
-	if (!test_mode() && command & LCK_CLUSTER_VG) {
-		status = hold_lock(resource, mode, LCKF_NOQUEUE | ((lock_flags & LCK_CONVERT_MODE) ? LCKF_CONVERT:0));
-		if (status) {
-			/* Return an LVM-sensible error for this.
-			 * Forcing EIO makes the upper level return this text
-			 * rather than the strerror text for EAGAIN.
-			 */
-			if (errno == EAGAIN) {
-				sprintf(last_error, "Volume is busy on another node");
-				errno = EIO;
-			}
-			return errno;
-		}
-	}
-
-	/* If it's suspended then resume it */
-	if (!lv_info_by_lvid(cmd, resource, 0, &lvi, 0, 0))
-		goto error;
-
-	if (lvi.suspended) {
-		critical_section_inc(cmd, "resuming");
-		if (!lv_resume(cmd, resource, 0, NULL)) {
-			critical_section_dec(cmd, "resumed");
-			goto error;
-		}
-	}
-
-	/* Now activate it */
-	if (!lv_activate(cmd, resource, exclusive, 0, 0, NULL))
-		goto error;
-
-	return 0;
-
-error:
-	if (!test_mode() && (oldmode == -1 || oldmode != mode))
-		(void)hold_unlock(resource);
-	return EIO;
-}
-
-/* Resume the LV if it was active */
-static int do_resume_lv(char *resource, unsigned char command, unsigned char lock_flags)
-{
-	int oldmode, origin_only, exclusive, revert;
-
-	/* Is it open ? */
-	oldmode = get_current_lock(resource);
-	if (oldmode == -1 && (command & LCK_CLUSTER_VG)) {
-		DEBUGLOG("do_resume_lv, lock not already held\n");
-		return 0;	/* We don't need to do anything */
-	}
-	origin_only = (lock_flags & LCK_ORIGIN_ONLY_MODE) ? 1 : 0;
-	exclusive = (oldmode == LCK_EXCL) ? 1 : 0;
-	revert = (lock_flags & LCK_REVERT_MODE) ? 1 : 0;
-
-	if (!lv_resume_if_active(cmd, resource, origin_only, exclusive, revert, NULL))
-		return EIO;
-
-	return 0;
-}
-
-/* Suspend the device if active */
-static int do_suspend_lv(char *resource, unsigned char command, unsigned char lock_flags)
-{
-	int oldmode;
-	unsigned origin_only = (lock_flags & LCK_ORIGIN_ONLY_MODE) ? 1 : 0;
-	unsigned exclusive;
-
-	/* Is it open ? */
-	oldmode = get_current_lock(resource);
-	if (oldmode == -1 && (command & LCK_CLUSTER_VG)) {
-		DEBUGLOG("do_suspend_lv, lock not already held\n");
-		return 0; /* Not active, so it's OK */
-	}
-
-	exclusive = (oldmode == LCK_EXCL) ? 1 : 0;
-
-	/* Always call lv_suspend to read commited and precommited data */
-	if (!lv_suspend_if_active(cmd, resource, origin_only, exclusive, NULL, NULL))
-		return EIO;
-
-	return 0;
-}
-
-static int do_deactivate_lv(char *resource, unsigned char command, unsigned char lock_flags)
-{
-	int oldmode;
-	int status;
-
-	/* Is it open ? */
-	oldmode = get_current_lock(resource);
-	if (oldmode == -1 && (command & LCK_CLUSTER_VG)) {
-		DEBUGLOG("do_deactivate_lock, lock not already held\n");
-		return 0;	/* We don't need to do anything */
-	}
-
-	if (!lv_deactivate(cmd, resource, NULL))
-		return EIO;
-
-	if (!test_mode() && command & LCK_CLUSTER_VG) {
-		status = hold_unlock(resource);
-		if (status)
-			return errno;
-	}
-
-	return 0;
-}
-
-const char *do_lock_query(char *resource)
-{
-	int mode;
-	const char *type;
-
-	mode = get_current_lock(resource);
-	switch (mode) {
-	case LCK_NULL: type = "NL"; break;
-	case LCK_READ: type = "CR"; break;
-	case LCK_PREAD:type = "PR"; break;
-	case LCK_WRITE:type = "PW"; break;
-	case LCK_EXCL: type = "EX"; break;
-	default: type = NULL;
-	}
-
-	DEBUGLOG("do_lock_query: resource '%s', mode %i (%s)\n", resource, mode, type ?: "--");
-
-	return type;
-}
-
-/* This is the LOCK_LV part that happens on all nodes in the cluster -
-   it is responsible for the interaction with device-mapper and LVM */
-int do_lock_lv(unsigned char command, unsigned char lock_flags, char *resource)
-{
-	int status = 0;
-
-	DEBUGLOG("do_lock_lv: resource '%s', cmd = %s, flags = %s, critical_section = %d\n",
-		 resource, decode_locking_cmd(command), decode_flags(lock_flags), critical_section());
-
-	if (!cmd->initialized.config || config_files_changed(cmd)) {
-		/* Reinitialise various settings inc. logging, filters */
-		if (do_refresh_cache()) {
-			log_error("Updated config file invalid. Aborting.");
-			return EINVAL;
-		}
-	}
-
-	pthread_mutex_lock(&lvm_lock);
-	init_test((lock_flags & LCK_TEST_MODE) ? 1 : 0);
-
-	if (lock_flags & LCK_MIRROR_NOSYNC_MODE)
-		init_mirror_in_sync(1);
-
-	if (lock_flags & LCK_DMEVENTD_MONITOR_IGNORE)
-		init_dmeventd_monitor(DMEVENTD_MONITOR_IGNORE);
-	else {
-		if (lock_flags & LCK_DMEVENTD_MONITOR_MODE)
-			init_dmeventd_monitor(1);
-		else
-			init_dmeventd_monitor(0);
-	}
-
-	cmd->partial_activation = (lock_flags & LCK_PARTIAL_MODE) ? 1 : 0;
-
-	/* clvmd should never try to read suspended device */
-	init_ignore_suspended_devices(1);
-
-	switch (command & LCK_MASK) {
-	case LCK_LV_EXCLUSIVE:
-		status = do_activate_lv(resource, command, lock_flags, LCK_EXCL);
-		break;
-
-	case LCK_LV_SUSPEND:
-		status = do_suspend_lv(resource, command, lock_flags);
-		break;
-
-	case LCK_UNLOCK:
-	case LCK_LV_RESUME:	/* if active */
-		status = do_resume_lv(resource, command, lock_flags);
-		break;
-
-	case LCK_LV_ACTIVATE:
-		status = do_activate_lv(resource, command, lock_flags, LCK_READ);
-		break;
-
-	case LCK_LV_DEACTIVATE:
-		status = do_deactivate_lv(resource, command, lock_flags);
-		break;
-
-	default:
-		DEBUGLOG("Invalid LV command 0x%x\n", command);
-		status = EINVAL;
-		break;
-	}
-
-	if (lock_flags & LCK_MIRROR_NOSYNC_MODE)
-		init_mirror_in_sync(0);
-
-	cmd->partial_activation = 0;
-
-	/* clean the pool for another command */
-	dm_pool_empty(cmd->mem);
-	init_test(0);
-	pthread_mutex_unlock(&lvm_lock);
-
-	DEBUGLOG("Command return is %d, critical_section is %d\n", status, critical_section());
-	return status;
-}
-
-/* Functions to do on the local node only BEFORE the cluster-wide stuff above happens */
-int pre_lock_lv(unsigned char command, unsigned char lock_flags, char *resource)
-{
-	/* Nearly all the stuff happens cluster-wide. Apart from SUSPEND. Here we get the
-	   lock out on this node (because we are the node modifying the metadata)
-	   before suspending cluster-wide.
-	   LCKF_CONVERT is used always, local node is going to modify metadata
-	 */
-	if ((command & (LCK_SCOPE_MASK | LCK_TYPE_MASK)) == LCK_LV_SUSPEND &&
-	    (command & LCK_CLUSTER_VG)) {
-		DEBUGLOG("pre_lock_lv: resource '%s', cmd = %s, flags = %s\n",
-			 resource, decode_locking_cmd(command), decode_flags(lock_flags));
-
-		if (!(lock_flags & LCK_TEST_MODE) &&
-		    hold_lock(resource, LCK_WRITE, LCKF_NOQUEUE | LCKF_CONVERT))
-			return errno;
-	}
-	return 0;
-}
-
-/* Functions to do on the local node only AFTER the cluster-wide stuff above happens */
-int post_lock_lv(unsigned char command, unsigned char lock_flags,
-		 char *resource)
-{
-	int status;
-	unsigned origin_only = (lock_flags & LCK_ORIGIN_ONLY_MODE) ? 1 : 0;
-
-	/* Opposite of above, done on resume after a metadata update */
-	if ((command & (LCK_SCOPE_MASK | LCK_TYPE_MASK)) == LCK_LV_RESUME &&
-	    (command & LCK_CLUSTER_VG)) {
-		int oldmode;
-
-		DEBUGLOG("post_lock_lv: resource '%s', cmd = %s, flags = %s\n",
-			 resource, decode_locking_cmd(command), decode_flags(lock_flags));
-
-		/* If the lock state is PW then restore it to what it was */
-		oldmode = get_current_lock(resource);
-		if (oldmode == LCK_WRITE) {
-			struct lvinfo lvi;
-
-			pthread_mutex_lock(&lvm_lock);
-			status = lv_info_by_lvid(cmd, resource, origin_only, &lvi, 0, 0);
-			pthread_mutex_unlock(&lvm_lock);
-			if (!status)
-				return EIO;
-
-			if (!(lock_flags & LCK_TEST_MODE)) {
-				if (lvi.exists) {
-					if (hold_lock(resource, LCK_READ, LCKF_CONVERT))
-						return errno;
-				} else if (hold_unlock(resource))
-					return errno;
-			}
-		}
-	}
-	return 0;
-}
-
-/* Check if a VG is in use by LVM1 so we don't stomp on it */
-int do_check_lvm1(const char *vgname)
-{
-	int status;
-
-	status = check_lvm1_vg_inactive(cmd, vgname);
-
-	return status == 1 ? 0 : EBUSY;
-}
-
-int do_refresh_cache(void)
-{
-	DEBUGLOG("Refreshing context\n");
-	log_notice("Refreshing context");
-
-	pthread_mutex_lock(&lvm_lock);
-
-	if (!refresh_toolcontext(cmd)) {
-		pthread_mutex_unlock(&lvm_lock);
-		return -1;
-	}
-
-	init_full_scan_done(0);
-	init_ignore_suspended_devices(1);
-	lvmcache_force_next_label_scan();
-	lvmcache_label_scan(cmd);
-	dm_pool_empty(cmd->mem);
-
-	pthread_mutex_unlock(&lvm_lock);
-
-	return 0;
-}
-
-/*
- * Handle VG lock - drop metadata or update lvmcache state
- */
-void do_lock_vg(unsigned char command, unsigned char lock_flags, char *resource)
-{
-	uint32_t lock_cmd = command;
-	char *vgname = resource + 2;
-
-	lock_cmd &= (LCK_SCOPE_MASK | LCK_TYPE_MASK | LCK_HOLD);
-
-	/*
-	 * Check if LCK_CACHE should be set. All P_ locks except # are cache related.
-	 */
-	if (strncmp(resource, "P_#", 3) && !strncmp(resource, "P_", 2))
-		lock_cmd |= LCK_CACHE;
-
-	DEBUGLOG("do_lock_vg: resource '%s', cmd = %s, flags = %s, critical_section = %d\n",
-		 resource, decode_full_locking_cmd(lock_cmd), decode_flags(lock_flags), critical_section());
-
-	/* P_#global causes a full cache refresh */
-	if (!strcmp(resource, "P_" VG_GLOBAL)) {
-		do_refresh_cache();
-		return;
-	}
-
-	pthread_mutex_lock(&lvm_lock);
-	init_test((lock_flags & LCK_TEST_MODE) ? 1 : 0);
-
-	switch (lock_cmd) {
-		case LCK_VG_COMMIT:
-			DEBUGLOG("vg_commit notification for VG %s\n", vgname);
-			lvmcache_commit_metadata(vgname);
-			break;
-		case LCK_VG_REVERT:
-			DEBUGLOG("vg_revert notification for VG %s\n", vgname);
-			lvmcache_drop_metadata(vgname, 1);
-			break;
-		case LCK_VG_DROP_CACHE:
-		default:
-			DEBUGLOG("Invalidating cached metadata for VG %s\n", vgname);
-			lvmcache_drop_metadata(vgname, 0);
-	}
-
-	init_test(0);
-	pthread_mutex_unlock(&lvm_lock);
-}
-
-/*
- * Ideally, clvmd should be started before any LVs are active
- * but this may not be the case...
- * I suppose this also comes in handy if clvmd crashes, not that it would!
- */
-static int get_initial_state(struct dm_hash_table *excl_uuid)
-{
-	int lock_mode;
-	char lv[65], vg[65], flags[26], vg_flags[26]; /* with space for '\0' */
-	char uuid[65];
-	char line[255];
-	char *lvs_cmd;
-	const char *lvm_binary = getenv("LVM_BINARY") ? : LVM_PATH;
-	FILE *lvs;
-
-	if (dm_asprintf(&lvs_cmd, "%s lvs  --config 'log{command_names=0 prefix=\"\"}' "
-			"--nolocking --noheadings -o vg_uuid,lv_uuid,lv_attr,vg_attr",
-			lvm_binary) < 0)
-		return_0;
-
-	/* FIXME: Maybe link and use liblvm2cmd directly instead of fork */
-	if (!(lvs = popen(lvs_cmd, "r"))) {
-		dm_free(lvs_cmd);
-		return 0;
-	}
-
-	while (fgets(line, sizeof(line), lvs)) {
-	        if (sscanf(line, "%64s %64s %25s %25s\n", vg, lv, flags, vg_flags) == 4) {
-
-			/* States: s:suspended a:active S:dropped snapshot I:invalid snapshot */
-		        if (strlen(vg) == 38 &&                         /* is is a valid UUID ? */
-			    (flags[4] == 'a' || flags[4] == 's') &&	/* is it active or suspended? */
-			    vg_flags[5] == 'c') {			/* is it clustered ? */
-				/* Convert hyphen-separated UUIDs into one */
-				memcpy(&uuid[0], &vg[0], 6);
-				memcpy(&uuid[6], &vg[7], 4);
-				memcpy(&uuid[10], &vg[12], 4);
-				memcpy(&uuid[14], &vg[17], 4);
-				memcpy(&uuid[18], &vg[22], 4);
-				memcpy(&uuid[22], &vg[27], 4);
-				memcpy(&uuid[26], &vg[32], 6);
-				memcpy(&uuid[32], &lv[0], 6);
-				memcpy(&uuid[38], &lv[7], 4);
-				memcpy(&uuid[42], &lv[12], 4);
-				memcpy(&uuid[46], &lv[17], 4);
-				memcpy(&uuid[50], &lv[22], 4);
-				memcpy(&uuid[54], &lv[27], 4);
-				memcpy(&uuid[58], &lv[32], 6);
-				uuid[64] = '\0';
-
-				/* Look for this lock in the list of EX locks
-				   we were passed on the command-line */
-				lock_mode = (dm_hash_lookup(excl_uuid, uuid)) ?
-					LCK_EXCL : LCK_READ;
-
-				DEBUGLOG("getting initial lock for %s\n", uuid);
-				if (hold_lock(uuid, lock_mode, LCKF_NOQUEUE))
-					DEBUGLOG("Failed to hold lock %s\n", uuid);
-			}
-		}
-	}
-	if (pclose(lvs))
-		DEBUGLOG("lvs pclose failed: %s\n", strerror(errno));
-
-	dm_free(lvs_cmd);
-
-	return 1;
-}
-
-static void lvm2_log_fn(int level, const char *file, int line, int dm_errno,
-			const char *message)
-{
-
-	/* Send messages to the normal LVM2 logging system too,
-	   so we get debug output when it's asked for.
- 	   We need to NULL the function ptr otherwise it will just call
-	   back into here! */
-	init_log_fn(NULL);
-	print_log(level, file, line, dm_errno, "%s", message);
-	init_log_fn(lvm2_log_fn);
-
-	/*
-	 * Ignore non-error messages, but store the latest one for returning
-	 * to the user.
-	 */
-	if (level != _LOG_ERR && level != _LOG_FATAL)
-		return;
-
-	strncpy(last_error, message, sizeof(last_error));
-	last_error[sizeof(last_error)-1] = '\0';
-}
-
-/* This checks some basic cluster-LVM configuration stuff */
-static void check_config(void)
-{
-	int locking_type;
-
-	locking_type = find_config_tree_int(cmd, global_locking_type_CFG, NULL);
-
-	if (locking_type == 3) /* compiled-in cluster support */
-		return;
-
-	if (locking_type == 2) { /* External library, check name */
-		const char *libname;
-
-		libname = find_config_tree_str(cmd, global_locking_library_CFG, NULL);
-		if (libname && strstr(libname, "liblvm2clusterlock.so"))
-			return;
-
-		log_error("Incorrect LVM locking library specified in lvm.conf, cluster operations may not work.");
-		return;
-	}
-	log_error("locking_type not set correctly in lvm.conf, cluster operations will not work.");
-}
-
-/* Backups up the LVM metadata if it's changed */
-void lvm_do_backup(const char *vgname)
-{
-	struct volume_group * vg;
-	int consistent = 0;
-
-	DEBUGLOG("Triggering backup of VG metadata for %s.\n", vgname);
-
-	pthread_mutex_lock(&lvm_lock);
-
-	vg = vg_read_internal(cmd, vgname, NULL /*vgid*/, WARN_PV_READ, &consistent);
-
-	if (vg && consistent)
-		check_current_backup(vg);
-	else
-		log_error("Error backing up metadata, can't find VG for group %s", vgname);
-
-	release_vg(vg);
-	dm_pool_empty(cmd->mem);
-
-	pthread_mutex_unlock(&lvm_lock);
-}
-
-struct dm_hash_node *get_next_excl_lock(struct dm_hash_node *v, char **name)
-{
-	struct lv_info *lvi;
-
-	*name = NULL;
-	if (!v)
-		v = dm_hash_get_first(lv_hash);
-
-	do {
-		if (v) {
-			lvi = dm_hash_get_data(lv_hash, v);
-			DEBUGLOG("Looking for EX locks. found %x mode %d\n", lvi->lock_id, lvi->lock_mode);
-
-			if (lvi->lock_mode == LCK_EXCL) {
-				*name = dm_hash_get_key(lv_hash, v);
-			}
-			v = dm_hash_get_next(lv_hash, v);
-		}
-	} while (v && !*name);
-
-	if (*name)
-		DEBUGLOG("returning EXclusive UUID %s\n", *name);
-	return v;
-}
-
-void lvm_do_fs_unlock(void)
-{
-	pthread_mutex_lock(&lvm_lock);
-	DEBUGLOG("Syncing device names\n");
-	fs_unlock();
-	pthread_mutex_unlock(&lvm_lock);
-}
-
-/* Called to initialise the LVM context of the daemon */
-int init_clvm(struct dm_hash_table *excl_uuid)
-{
-	/* Use LOG_DAEMON for syslog messages instead of LOG_USER */
-	init_syslog(LOG_DAEMON);
-	openlog("clvmd", LOG_PID, LOG_DAEMON);
-
-	/* Initialise already held locks */
-	if (!get_initial_state(excl_uuid))
-		log_error("Cannot load initial lock states.");
-
-	if (!udev_init_library_context())
-		stack;
-
-	if (!(cmd = create_toolcontext(1, NULL, 0, 1, 1, 1))) {
-		log_error("Failed to allocate command context");
-		udev_fin_library_context();
-		return 0;
-	}
-
-	if (stored_errno()) {
-		destroy_toolcontext(cmd);
-		return 0;
-	}
-
-	cmd->cmd_line = "clvmd";
-
-	/* Check lvm.conf is setup for cluster-LVM */
-	check_config();
-	init_ignore_suspended_devices(1);
-
-	/* Trap log messages so we can pass them back to the user */
-	init_log_fn(lvm2_log_fn);
-	memlock_inc_daemon(cmd);
-
-	return 1;
-}
-
-void destroy_lvm(void)
-{
-	if (cmd) {
-		memlock_dec_daemon(cmd);
-		destroy_toolcontext(cmd);
-		udev_fin_library_context();
-		cmd = NULL;
-	}
-}

daemons/clvmd/lvm-functions.h

@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2010 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* Functions in lvm-functions.c */
-
-#ifndef _LVM_FUNCTIONS_H
-#define _LVM_FUNCTIONS_H
-
-extern int pre_lock_lv(unsigned char lock_cmd, unsigned char lock_flags,
-		       char *resource);
-extern int do_lock_lv(unsigned char lock_cmd, unsigned char lock_flags,
-		      char *resource);
-extern const char *do_lock_query(char *resource);
-extern int post_lock_lv(unsigned char lock_cmd, unsigned char lock_flags,
-			char *resource);
-extern int do_check_lvm1(const char *vgname);
-extern int do_refresh_cache(void);
-extern int init_clvm(struct dm_hash_table *excl_uuid);
-extern void destroy_lvm(void);
-extern void init_lvhash(void);
-extern void destroy_lvhash(void);
-extern void lvm_do_backup(const char *vgname);
-extern char *get_last_lvm_error(void);
-extern void do_lock_vg(unsigned char command, unsigned char lock_flags,
-		      char *resource);
-extern struct dm_hash_node *get_next_excl_lock(struct dm_hash_node *v, char **name);
-void lvm_do_fs_unlock(void);
-
-#endif

daemons/clvmd/refresh_clvmd.c

@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2002-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2010 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* FIXME Remove duplicated functions from this file. */
-
-/*
- * Send a command to a running clvmd from the command-line
- */
-
-#include "clvmd-common.h"
-
-#include "clvm.h"
-#include "refresh_clvmd.h"
-
-#include <stddef.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-
-typedef struct lvm_response {
-	char node[255];
-	char *response;
-	int status;
-	int len;
-} lvm_response_t;
-
-/*
- * This gets stuck at the start of memory we allocate so we
- * can sanity-check it at deallocation time
- */
-#define LVM_SIGNATURE 0x434C564D
-
-static int _clvmd_sock = -1;
-
-/* Open connection to the clvm daemon */
-static int _open_local_sock(void)
-{
-	int local_socket;
-	struct sockaddr_un sockaddr = { .sun_family = AF_UNIX };
-
-	if (!dm_strncpy(sockaddr.sun_path, CLVMD_SOCKNAME, sizeof(sockaddr.sun_path))) {
-		fprintf(stderr, "%s: clvmd socket name too long.", CLVMD_SOCKNAME);
-		return -1;
-	}
-
-	/* Open local socket */
-	if ((local_socket = socket(PF_UNIX, SOCK_STREAM, 0)) < 0) {
-		fprintf(stderr, "Local socket creation failed: %s", strerror(errno));
-		return -1;
-	}
-
-	if (connect(local_socket,(struct sockaddr *) &sockaddr,
-		    sizeof(sockaddr))) {
-		int saved_errno = errno;
-
-		fprintf(stderr, "connect() failed on local socket: %s\n",
-			  strerror(errno));
-		if (close(local_socket))
-			return -1;
-
-		errno = saved_errno;
-		return -1;
-	}
-
-	return local_socket;
-}
-
-/* Send a request and return the status */
-static int _send_request(const char *inbuf, int inlen, char **retbuf, int no_response)
-{
-	char outbuf[PIPE_BUF];
-	struct clvm_header *outheader = (struct clvm_header *) outbuf;
-	int len;
-	unsigned off;
-	int buflen;
-	int err;
-
-	/* Send it to CLVMD */
- rewrite:
-	if ( (err = write(_clvmd_sock, inbuf, inlen)) != inlen) {
-	        if (err == -1 && errno == EINTR)
-		        goto rewrite;
-		fprintf(stderr, "Error writing data to clvmd: %s", strerror(errno));
-		return 0;
-	}
-	if (no_response)
-		return 1;
-
-	/* Get the response */
- reread:
-	if ((len = read(_clvmd_sock, outbuf, sizeof(struct clvm_header))) < 0) {
-	        if (errno == EINTR)
-		        goto reread;
-		fprintf(stderr, "Error reading data from clvmd: %s", strerror(errno));
-		return 0;
-	}
-
-	if (len == 0) {
-		fprintf(stderr, "EOF reading CLVMD");
-		errno = ENOTCONN;
-		return 0;
-	}
-
-	/* Allocate buffer */
-	buflen = len + outheader->arglen;
-	*retbuf = dm_malloc(buflen);
-	if (!*retbuf) {
-		errno = ENOMEM;
-		return 0;
-	}
-
-	/* Copy the header */
-	memcpy(*retbuf, outbuf, len);
-	outheader = (struct clvm_header *) *retbuf;
-
-	/* Read the returned values */
-	off = 1;		/* we've already read the first byte */
-	while (off <= outheader->arglen && len > 0) {
-		len = read(_clvmd_sock, outheader->args + off,
-			   buflen - off - offsetof(struct clvm_header, args));
-		if (len > 0)
-			off += len;
-	}
-
-	/* Was it an error ? */
-	if (outheader->status != 0) {
-		errno = outheader->status;
-
-		/* Only return an error here if there are no node-specific
-		   errors present in the message that might have more detail */
-		if (!(outheader->flags & CLVMD_FLAG_NODEERRS)) {
-			fprintf(stderr, "cluster request failed: %s\n", strerror(errno));
-			return 0;
-		}
-
-	}
-
-	return 1;
-}
-
-/* Build the structure header and parse-out wildcard node names */
-static void _build_header(struct clvm_header *head, int cmd, const char *node,
-			  unsigned int len)
-{
-	head->cmd = cmd;
-	head->status = 0;
-	head->flags = 0;
-	head->xid = 0;
-	head->clientid = 0;
-	if (len)
-		/* 1 byte is used from struct clvm_header.args[1], so -> len - 1 */
-		head->arglen = len - 1;
-	else {
-		head->arglen = 0;
-		*head->args = '\0';
-	}
-
-	/*
-	 * Translate special node names.
-	 */
-	if (!node || !strcmp(node, NODE_ALL))
-		head->node[0] = '\0';
-	else if (!strcmp(node, NODE_LOCAL)) {
-		head->node[0] = '\0';
-		head->flags = CLVMD_FLAG_LOCAL;
-	} else
-		strcpy(head->node, node);
-}
-
-/*
- * Send a message to a(or all) node(s) in the cluster and wait for replies
- */
-static int _cluster_request(char cmd, const char *node, void *data, int len,
-			    lvm_response_t ** response, int *num, int no_response)
-{
-	char outbuf[sizeof(struct clvm_header) + len + strlen(node) + 1];
-	char *inptr;
-	char *retbuf = NULL;
-	int status;
-	int i;
-	int num_responses = 0;
-	struct clvm_header *head = (struct clvm_header *) outbuf;
-	lvm_response_t *rarray;
-
-	*num = 0;
-
-	if (_clvmd_sock == -1)
-		_clvmd_sock = _open_local_sock();
-
-	if (_clvmd_sock == -1)
-		return 0;
-
-	_build_header(head, cmd, node, len);
-	if (len)
-		memcpy(head->node + strlen(head->node) + 1, data, len);
-
-	status = _send_request(outbuf, sizeof(struct clvm_header) +
-			       strlen(head->node) + len, &retbuf, no_response);
-	if (!status || no_response)
-		goto out;
-
-	/* Count the number of responses we got */
-	head = (struct clvm_header *) retbuf;
-	inptr = head->args;
-	while (inptr[0]) {
-		num_responses++;
-		inptr += strlen(inptr) + 1;
-		inptr += sizeof(int);
-		inptr += strlen(inptr) + 1;
-	}
-
-	/*
-	 * Allocate response array.
-	 * With an extra pair of INTs on the front to sanity
-	 * check the pointer when we are given it back to free
-	 */
-	*response = NULL;
-	if (!(rarray = dm_malloc(sizeof(lvm_response_t) * num_responses +
-				 sizeof(int) * 2))) {
-		errno = ENOMEM;
-		status = 0;
-		goto out;
-	}
-
-	/* Unpack the response into an lvm_response_t array */
-	inptr = head->args;
-	i = 0;
-	while (inptr[0]) {
-		strcpy(rarray[i].node, inptr);
-		inptr += strlen(inptr) + 1;
-
-		memcpy(&rarray[i].status, inptr, sizeof(int));
-		inptr += sizeof(int);
-
-		rarray[i].response = dm_malloc(strlen(inptr) + 1);
-		if (rarray[i].response == NULL) {
-			/* Free up everything else and return error */
-			int j;
-			for (j = 0; j < i; j++)
-				dm_free(rarray[i].response);
-			dm_free(rarray);
-			errno = ENOMEM;
-			status = 0;
-			goto out;
-		}
-
-		strcpy(rarray[i].response, inptr);
-		rarray[i].len = strlen(inptr);
-		inptr += strlen(inptr) + 1;
-		i++;
-	}
-	*num = num_responses;
-	*response = rarray;
-
-      out:
-	dm_free(retbuf);
-
-	return status;
-}
-
-/* Free reply array */
-static int _cluster_free_request(lvm_response_t * response, int num)
-{
-	int i;
-
-	for (i = 0; i < num; i++) {
-		dm_free(response[i].response);
-	}
-
-	dm_free(response);
-
-	return 1;
-}
-
-int refresh_clvmd(int all_nodes)
-{
-	int num_responses;
-	char args[1]; // No args really.
-	lvm_response_t *response = NULL;
-	int saved_errno;
-	int status;
-	int i;
-
-	status = _cluster_request(CLVMD_CMD_REFRESH, all_nodes ? NODE_ALL : NODE_LOCAL, args, 0, &response, &num_responses, 0);
-
-	/* If any nodes were down then display them and return an error */
-	for (i = 0; i < num_responses; i++) {
-		if (response[i].status == EHOSTDOWN) {
-			fprintf(stderr, "clvmd not running on node %s",
-				  response[i].node);
-			status = 0;
-			errno = response[i].status;
-		} else if (response[i].status) {
-			fprintf(stderr, "Error resetting node %s: %s",
-				  response[i].node,
-				  response[i].response[0] ?
-				  	response[i].response :
-				  	strerror(response[i].status));
-			status = 0;
-			errno = response[i].status;
-		}
-	}
-
-	saved_errno = errno;
-	_cluster_free_request(response, num_responses);
-	errno = saved_errno;
-
-	return status;
-}
-
-int restart_clvmd(int all_nodes)
-{
-	int dummy, status;
-
-	status = _cluster_request(CLVMD_CMD_RESTART, all_nodes ? NODE_ALL : NODE_LOCAL, NULL, 0, NULL, &dummy, 1);
-
-	/*
-	 * FIXME: we cannot receive response, clvmd re-exec before it.
-	 *        but also should not close socket too early (the whole rq is dropped then).
-	 * FIXME: This should be handled this way:
-	 *  - client waits for RESTART ack (and socket close)
-	 *  - server restarts
-	 *  - client checks that server is ready again (VERSION command?)
-	 */
-	usleep(500000);
-
-	return status;
-}
-
-int debug_clvmd(int level, int clusterwide)
-{
-	int num_responses;
-	char args[1];
-	const char *nodes;
-	lvm_response_t *response = NULL;
-	int saved_errno;
-	int status;
-	int i;
-
-	args[0] = level;
-	if (clusterwide)
-		nodes = NODE_ALL;
-	else
-		nodes = NODE_LOCAL;
-
-	status = _cluster_request(CLVMD_CMD_SET_DEBUG, nodes, args, 1, &response, &num_responses, 0);
-
-	/* If any nodes were down then display them and return an error */
-	for (i = 0; i < num_responses; i++) {
-		if (response[i].status == EHOSTDOWN) {
-			fprintf(stderr, "clvmd not running on node %s",
-				  response[i].node);
-			status = 0;
-			errno = response[i].status;
-		} else if (response[i].status) {
-			fprintf(stderr, "Error setting debug on node %s: %s",
-				  response[i].node,
-				  response[i].response[0] ?
-				  	response[i].response :
-				  	strerror(response[i].status));
-			status = 0;
-			errno = response[i].status;
-		}
-	}
-
-	saved_errno = errno;
-	_cluster_free_request(response, num_responses);
-	errno = saved_errno;
-
-	return status;
-}

daemons/clvmd/refresh_clvmd.h

@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2007 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-
-int refresh_clvmd(int all_nodes);
-int restart_clvmd(int all_nodes);
-int debug_clvmd(int level, int clusterwide);
-

daemons/cmirrord/.gitignore

@@ -1 +0,0 @@
-cmirrord

daemons/cmirrord/Makefile.in

@@ -1,39 +0,0 @@
-#
-# Copyright (C) 2009-2010 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-CPG_LIBS = @CPG_LIBS@
-CPG_CFLAGS = @CPG_CFLAGS@
-SACKPT_LIBS = @SACKPT_LIBS@
-SACKPT_CFLAGS = @SACKPT_CFLAGS@
-
-SOURCES = clogd.c cluster.c compat.c functions.c link_mon.c local.c logging.c
-
-TARGETS = cmirrord
-
-include $(top_builddir)/make.tmpl
-
-LIBS += -ldevmapper
-LMLIBS += $(CPG_LIBS) $(SACKPT_LIBS)
-CFLAGS += $(CPG_CFLAGS) $(SACKPT_CFLAGS) $(EXTRA_EXEC_CFLAGS)
-LDFLAGS += $(EXTRA_EXEC_LDFLAGS)
-
-cmirrord: $(OBJECTS) $(top_builddir)/lib/liblvm-internal.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) \
-		$(LVMLIBS) $(LMLIBS) $(LIBS)
-
-install: $(TARGETS)
-	$(INSTALL_PROGRAM) -D cmirrord $(usrsbindir)/cmirrord

daemons/cmirrord/clogd.c

@@ -1,292 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include "logging.h"
-#include "common.h"
-#include "functions.h"
-#include "link_mon.h"
-#include "local.h"
-
-#include <getopt.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <unistd.h>
-
-static volatile sig_atomic_t exit_now = 0;
-/* FIXME Review signal handling.  Should be volatile sig_atomic_t */
-static sigset_t signal_mask;
-static volatile sig_atomic_t signal_received;
-
-static void process_signals(void);
-static void daemonize(void);
-static void init_all(void);
-static void cleanup_all(void);
-
-static void usage (FILE *dest)
-{
-	fprintf (dest, "Usage: cmirrord [options]\n"
-		 "   -f, --foreground    stay in the foreground, log to the terminal\n"
-		 "   -h, --help          print this help\n");
-}
-
-int main(int argc, char *argv[])
-{
-	int foreground_mode = 0;
-	struct option longopts[] = {
-		{ "foreground", no_argument, NULL, 'f' },
-		{ "help"      , no_argument, NULL, 'h' },
-		{ 0, 0, 0, 0 }
-	};
-	int opt;
-
-	while ((opt = getopt_long (argc, argv, "fh", longopts, NULL)) != -1) {
-		switch (opt) {
-		case 'f':
-			foreground_mode = 1;
-			break;
-		case 'h':
-			usage (stdout);
-			exit (0);
-		default:
-			usage (stderr);
-			exit (2);
-		}
-	}
-	if (optind < argc) {
-		usage (stderr);
-		exit (2);
-	}
-
-	if (!foreground_mode)
-		daemonize();
-
-	init_all();
-
-	/* Parent can now exit, we're ready to handle requests */
-	if (!foreground_mode)
-		kill(getppid(), SIGTERM);
-
-	LOG_PRINT("Starting cmirrord:");
-	LOG_PRINT(" Built: "__DATE__" "__TIME__"\n");
-	LOG_DBG(" Compiled with debugging.");
-
-	while (!exit_now) {
-		links_monitor();
-
-		links_issue_callbacks();
-
-		process_signals();
-	}
-	exit(EXIT_SUCCESS);
-}
-
-/*
- * parent_exit_handler: exit the parent
- * @sig: the signal
- *
- */
-static void parent_exit_handler(int sig __attribute__((unused)))
-{
-	exit_now = 1;
-}
-
-static void sig_handler(int sig)
-{
-	/* FIXME Races - don't touch signal_mask here. */
-	sigaddset(&signal_mask, sig);
-	signal_received = 1;
-}
-
-static void process_signal(int sig){
-	int r = 0;
-
-	switch(sig) {
-	case SIGINT:
-	case SIGQUIT:
-	case SIGTERM:
-	case SIGHUP:
-		r += log_status();
-		break;
-	case SIGUSR1:
-	case SIGUSR2:
-		log_debug();
-		/*local_debug();*/
-		cluster_debug();
-		return;
-	default:
-		LOG_PRINT("Unknown signal received... ignoring");
-		return;
-	}
-
-	if (!r) {
-		LOG_DBG("No current cluster logs... safe to exit.");
-		cleanup_all();
-		exit(EXIT_SUCCESS);
-	}
-
-	LOG_ERROR("Cluster logs exist.  Refusing to exit.");
-}
-
-static void process_signals(void)
-{
-	int x;
-
-	if (!signal_received)
-		return;
-
-	signal_received = 0;
-
-	for (x = 1; x < _NSIG; x++) {
-		if (sigismember(&signal_mask, x)) {
-			sigdelset(&signal_mask, x);
-			process_signal(x);
-		}
-	}
-}
-
-static void remove_lockfile(void)
-{
-	if (unlink(CMIRRORD_PIDFILE))
-		LOG_ERROR("Unable to remove \"" CMIRRORD_PIDFILE "\" %s", strerror(errno));
-}
-
-/*
- * daemonize
- *
- * Performs the steps necessary to become a daemon.
- */
-static void daemonize(void)
-{
-	int pid;
-	int status;
-	int devnull;
-
-	if ((devnull = open("/dev/null", O_RDWR)) == -1) {
-		LOG_ERROR("Can't open /dev/null: %s", strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-
-	signal(SIGTERM, &parent_exit_handler);
-
-	pid = fork();
-
-	if (pid < 0) {
-		LOG_ERROR("Unable to fork()");
-		exit(EXIT_FAILURE);
-	}
-
-	if (pid) {
-		/* Parent waits here for child to get going */
-		while (!waitpid(pid, &status, WNOHANG) && !exit_now);
-		if (exit_now)
-			exit(EXIT_SUCCESS);
-
-		switch (WEXITSTATUS(status)) {
-		case EXIT_LOCKFILE:
-			LOG_ERROR("Failed to create lockfile");
-			LOG_ERROR("Process already running?");
-			break;
-		case EXIT_KERNEL_SOCKET:
-			LOG_ERROR("Unable to create netlink socket");
-			break;
-		case EXIT_KERNEL_BIND:
-			LOG_ERROR("Unable to bind to netlink socket");
-			break;
-		case EXIT_KERNEL_SETSOCKOPT:
-			LOG_ERROR("Unable to setsockopt on netlink socket");
-			break;
-		case EXIT_CLUSTER_CKPT_INIT:
-			LOG_ERROR("Unable to initialize checkpoint service");
-			LOG_ERROR("Has the cluster infrastructure been started?");
-			break;
-		case EXIT_FAILURE:
-			LOG_ERROR("Failed to start: Generic error");
-			break;
-		default:
-			LOG_ERROR("Failed to start: Unknown error");
-			break;
-		}
-		exit(EXIT_FAILURE);
-	}
-
-	setsid();
-	if (chdir("/")) {
-		LOG_ERROR("Failed to chdir /: %s", strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-
-	umask(0);
-
-	if (close(0) || close(1) || close(2)) {
-		LOG_ERROR("Failed to close terminal FDs");
-		exit(EXIT_FAILURE);
-	}
-
-	if ((dup2(devnull, 0) < 0) || /* reopen stdin */
-	    (dup2(devnull, 1) < 0) || /* reopen stdout */
-	    (dup2(devnull, 2) < 0))   /* reopen stderr */
-		exit(EXIT_FAILURE);
-
-	if ((devnull > STDERR_FILENO) && close(devnull)) {
-		LOG_ERROR("Failed to close descriptor %d: %s",
-			  devnull, strerror(errno));
-		exit(EXIT_FAILURE);
-	}
-
-	LOG_OPEN("cmirrord", LOG_PID, LOG_DAEMON);
-}
-
-/*
- * init_all
- *
- * Initialize modules.  Exit on failure.
- */
-static void init_all(void)
-{
-	int r;
-
-	(void) dm_prepare_selinux_context(CMIRRORD_PIDFILE, S_IFREG);
-	if (dm_create_lockfile(CMIRRORD_PIDFILE) == 0)
-		exit(EXIT_LOCKFILE);
-	(void) dm_prepare_selinux_context(NULL, 0);
-
-	atexit(remove_lockfile);
-
-	/* FIXME Replace with sigaction. (deprecated) */
-	signal(SIGINT, &sig_handler);
-	signal(SIGQUIT, &sig_handler);
-	signal(SIGTERM, &sig_handler);
-	signal(SIGHUP, &sig_handler);
-	signal(SIGPIPE, SIG_IGN);
-	signal(SIGUSR1, &sig_handler);
-	signal(SIGUSR2, &sig_handler);
-	sigemptyset(&signal_mask);
-	signal_received = 0;
-
-	if ((r = init_local()) ||
-	    (r = init_cluster())) {
-		exit(r);
-	}
-}
-
-/*
- * cleanup_all
- *
- * Clean up before exiting
- */
-static void cleanup_all(void)
-{
-	cleanup_local();
-	cleanup_cluster();
-}

daemons/cmirrord/cluster.h

@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef _LVM_CLOG_CLUSTER_H
-#define _LVM_CLOG_CLUSTER_H
-
-#include "dm-log-userspace.h"
-#include "libdevmapper.h"
-
-#define DM_ULOG_RESPONSE 0x1000U /* in last byte of 32-bit value */
-#define DM_ULOG_CHECKPOINT_READY 21
-#define DM_ULOG_MEMBER_JOIN      22
-
-/*
- * There is other information in addition to what can
- * be found in the dm_ulog_request structure that we
- * need for processing.  'clog_request' is the wrapping
- * structure we use to make the additional fields
- * available.
- */
-struct clog_request {
-	/*
-	 * If we don't use a union, the structure size will
-	 * vary between 32-bit and 64-bit machines.  So, we
-	 * pack two 64-bit version numbers in there to force
-	 * the size of the structure to be the same.
-	 *
-	 * The two version numbers also help us with endian
-	 * issues.  The first is always little endian, while
-	 * the second is in native format of the sending
-	 * machine.  If the two are equal, there is no need
-	 * to do endian conversions.
-	 */
-	union {
-		uint64_t version[2]; /* LE version and native version */
-		struct dm_list list;
-	} u;
-
-	/*
-	 * 'originator' is the machine from which the requests
-	 * was made.
-	 */
-	uint32_t originator;
-
-	/*
-	 * 'pit_server' is the "point-in-time" server for the
-	 * request.  (I.e.  The machine that was the server at
-	 * the time the request was issued - only important during
-	 * startup.
-	 */
-	uint32_t pit_server;
-
-	/*
-	 * The request from the kernel that is being processed
-	 */
-	struct dm_ulog_request u_rq;
-};
-
-int init_cluster(void);
-void cleanup_cluster(void);
-void cluster_debug(void);
-
-int create_cluster_cpg(char *uuid, uint64_t luid);
-int destroy_cluster_cpg(char *uuid);
-
-int cluster_send(struct clog_request *rq);
-
-#endif /* _LVM_CLOG_CLUSTER_H */

daemons/cmirrord/common.h

@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef _LVM_CLOG_COMMON_H
-#define _LVM_CLOG_COMMON_H
-
-/*
- * If there are problems when forking off to become a daemon,
- * the child will exist with one of these codes.  This allows
- * the parent to know the reason for the failure and print it
- * to the launching terminal.
- *
- * #define EXIT_SUCCESS 0 (from stdlib.h)
- * #define EXIT_FAILURE 1 (from stdlib.h)
- */
-#define EXIT_LOCKFILE              2
-#define EXIT_KERNEL_SOCKET         3 /* Failed netlink socket create */
-#define EXIT_KERNEL_BIND           4
-#define EXIT_KERNEL_SETSOCKOPT     5
-#define EXIT_CLUSTER_CKPT_INIT     6 /* Failed to init checkpoint */
-#define EXIT_QUEUE_NOMEM           7
-
-#define DM_ULOG_REQUEST_SIZE 1024
-
-#endif /* _LVM_CLOG_COMMON_H */

daemons/cmirrord/compat.c

@@ -1,210 +0,0 @@
-/*
- * Copyright (C) 2010 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- */
-#include "logging.h"
-#include "cluster.h"
-#include "compat.h"
-#include "xlate.h"
-
-#include <errno.h>
-
-/*
- * Older versions of the log daemon communicate with different
- * versions of the inter-machine communication structure, which
- * varies in size and fields.  The older versions append the
- * standard upstream version of the structure to every request.
- * COMPAT_OFFSET is where the upstream structure starts.
- */
-#define COMPAT_OFFSET 256
-
-static void v5_data_endian_switch(struct clog_request *rq, int to_network __attribute__((unused)))
-{
-	int i, end;
-	int64_t *pi64;
-	uint64_t *pu64;
-	uint32_t rq_type = rq->u_rq.request_type & ~DM_ULOG_RESPONSE;
-
-	if (rq->u_rq.request_type & DM_ULOG_RESPONSE) {
-		switch (rq_type) {
-		case DM_ULOG_CTR:
-		case DM_ULOG_DTR:
-			LOG_ERROR("Invalid response type in endian switch");
-			exit(EXIT_FAILURE);
-
-		case DM_ULOG_PRESUSPEND:
-		case DM_ULOG_POSTSUSPEND:
-		case DM_ULOG_RESUME:
-		case DM_ULOG_FLUSH:
-		case DM_ULOG_MARK_REGION:
-		case DM_ULOG_CLEAR_REGION:
-		case DM_ULOG_SET_REGION_SYNC:
-		case DM_ULOG_CHECKPOINT_READY:
-		case DM_ULOG_MEMBER_JOIN:
-		case DM_ULOG_STATUS_INFO:
-		case DM_ULOG_STATUS_TABLE:
-			/* No outbound data */
-			break;
-
-		case DM_ULOG_GET_REGION_SIZE:
-		case DM_ULOG_GET_SYNC_COUNT:
-			pu64 = (uint64_t *)rq->u_rq.data;
-			*pu64 = xlate64(*pu64);
-			break;
-		case DM_ULOG_IS_CLEAN:
-		case DM_ULOG_IN_SYNC:
-			pi64 = (int64_t *)rq->u_rq.data;
-			*pi64 = xlate64(*pi64);
-			break;
-		case DM_ULOG_GET_RESYNC_WORK:
-		case DM_ULOG_IS_REMOTE_RECOVERING:
-			pi64 = (int64_t *)rq->u_rq.data;
-			pu64 = ((uint64_t *)rq->u_rq.data) + 1;
-			*pi64 = xlate64(*pi64);
-			*pu64 = xlate64(*pu64);
-			break;
-		default:
-			LOG_ERROR("Unknown request type, %u", rq_type);
-			return;
-		}
-	} else {
-		switch (rq_type) {
-		case DM_ULOG_CTR:
-		case DM_ULOG_DTR:
-			LOG_ERROR("Invalid request type in endian switch");
-			exit(EXIT_FAILURE);
-
-		case DM_ULOG_PRESUSPEND:
-		case DM_ULOG_POSTSUSPEND:
-		case DM_ULOG_RESUME:
-		case DM_ULOG_GET_REGION_SIZE:
-		case DM_ULOG_FLUSH:
-		case DM_ULOG_GET_RESYNC_WORK:
-		case DM_ULOG_GET_SYNC_COUNT:
-		case DM_ULOG_STATUS_INFO:
-		case DM_ULOG_STATUS_TABLE:
-		case DM_ULOG_CHECKPOINT_READY:
-		case DM_ULOG_MEMBER_JOIN:
-			/* No incoming data */
-			break;
-		case DM_ULOG_IS_CLEAN:
-		case DM_ULOG_IN_SYNC:
-		case DM_ULOG_IS_REMOTE_RECOVERING:
-			pu64 = (uint64_t *)rq->u_rq.data;
-			*pu64 = xlate64(*pu64);
-			break;
-		case DM_ULOG_MARK_REGION:
-		case DM_ULOG_CLEAR_REGION:
-			end = rq->u_rq.data_size/sizeof(uint64_t);
-
-			pu64 = (uint64_t *)rq->u_rq.data;
-			for (i = 0; i < end; i++)
-				pu64[i] = xlate64(pu64[i]);
-			break;
-		case DM_ULOG_SET_REGION_SYNC:
-			pu64 = (uint64_t *)rq->u_rq.data;
-			pi64 = ((int64_t *)rq->u_rq.data) + 1;
-			*pu64 = xlate64(*pu64);
-			*pi64 = xlate64(*pi64);
-			break;
-		default:
-			LOG_ERROR("Unknown request type, %u", rq_type);
-			exit(EXIT_FAILURE);
-		}
-	}
-}
-
-static int v5_endian_to_network(struct clog_request *rq)
-{
-	int size;
-	struct dm_ulog_request *u_rq = &rq->u_rq;
-
-	size = sizeof(*rq) + u_rq->data_size;
-
-	u_rq->error = xlate32(u_rq->error);
-	u_rq->seq = xlate32(u_rq->seq);
-
-	rq->originator = xlate32(rq->originator);
-
-	v5_data_endian_switch(rq, 1);
-
-	u_rq->request_type = xlate32(u_rq->request_type);
-	u_rq->data_size = xlate32(u_rq->data_size);
-
-	return size;
-}
-
-int clog_request_to_network(struct clog_request *rq)
-{
-	int r;
-
-	/* FIXME: Remove this safety check */
-	if (rq->u.version[0] != xlate64(rq->u.version[1])) {
-		LOG_ERROR("Programmer error:  version[0] must be LE");
-		exit(EXIT_FAILURE);
-	}
-
-	/*
-	 * Are we already running in the endian mode we send
-	 * over the wire?
-	 */
-	if (rq->u.version[0] == rq->u.version[1])
-		return 0;
-
-	r = v5_endian_to_network(rq);
-	if (r < 0)
-		return r;
-	return 0;
-}
-
-static int v5_endian_from_network(struct clog_request *rq)
-{
-	int size;
-	struct dm_ulog_request *u_rq = &rq->u_rq;
-
-	u_rq->error = xlate32(u_rq->error);
-	u_rq->seq = xlate32(u_rq->seq);
-	u_rq->request_type = xlate32(u_rq->request_type);
-	u_rq->data_size = xlate32(u_rq->data_size);
-
-	rq->originator = xlate32(rq->originator);
-
-	size = sizeof(*rq) + u_rq->data_size;
-
-	v5_data_endian_switch(rq, 0);
-
-	return size;
-}
-
-int clog_request_from_network(void *data, size_t data_len)
-{
-	uint64_t *vp = data;
-	uint64_t version = xlate64(vp[0]);
-	struct clog_request *rq = data;
-
-	switch (version) {
-	case 5: /* Upstream */
-		if (version == vp[0])
-			return 0;
-		break;
-	case 4: /* RHEL 5.[45] */
-	case 3: /* RHEL 5.3 */
-	case 2: /* RHEL 5.2 */
-		/* FIXME: still need to account for payload */
-		if (data_len < (COMPAT_OFFSET + sizeof(*rq)))
-			return -ENOSPC;
-
-		rq = (struct clog_request *)((char *)data + COMPAT_OFFSET);
-		break;
-	default:
-		LOG_ERROR("Unable to process cluster message: "
-			  "Incompatible version");
-		return -EINVAL;
-	}
-
-	v5_endian_from_network(rq);
-	return 0;
-}

daemons/cmirrord/compat.h

@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2010 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- */
-#ifndef _LVM_CLOG_COMPAT_H
-#define _LVM_CLOG_COMPAT_H
-
-/*
- * The intermachine communication structure version are:
- *	0: Unused
- *	1: Never in the wild
- *	2: RHEL 5.2
- *	3: RHEL 5.3
- *	4: RHEL 5.4, RHEL 5.5
- *	5: RHEL 6, Current Upstream Format
- */
-#define CLOG_TFR_VERSION 5
-
-int clog_request_to_network(struct clog_request *rq);
-int clog_request_from_network(void *data, size_t data_len);
-
-#endif /* _LVM_CLOG_COMPAT_H */

daemons/cmirrord/functions.h

@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef _LVM_CLOG_FUNCTIONS_H
-#define _LVM_CLOG_FUNCTIONS_H
-
-#include "dm-log-userspace.h"
-#include "cluster.h"
-
-#define LOG_RESUMED   1
-#define LOG_SUSPENDED 2
-
-int local_resume(struct dm_ulog_request *rq);
-int cluster_postsuspend(char *, uint64_t);
-
-int do_request(struct clog_request *rq, int server);
-int push_state(const char *uuid, uint64_t luid,
-	       const char *which, char **buf, uint32_t debug_who);
-int pull_state(const char *uuid, uint64_t luid,
-	       const char *which, char *buf, int size);
-
-int log_get_state(struct dm_ulog_request *rq);
-int log_status(void);
-void log_debug(void);
-
-#endif /* _LVM_CLOG_FUNCTIONS_H */

daemons/cmirrord/link_mon.c

@@ -1,151 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include "logging.h"
-#include "link_mon.h"
-
-#include <errno.h>
-#include <poll.h>
-#include <stdlib.h>
-
-struct link_callback {
-	int fd;
-	const char *name;
-	void *data;
-	int (*callback)(void *data);
-
-	struct link_callback *next;
-};
-
-static unsigned used_pfds = 0;
-static unsigned free_pfds = 0;
-static struct pollfd *pfds = NULL;
-static struct link_callback *callbacks = NULL;
-
-int links_register(int fd, const char *name, int (*callback)(void *data), void *data)
-{
-	unsigned i;
-	struct link_callback *lc;
-
-	for (i = 0; i < used_pfds; i++) {
-		if (fd == pfds[i].fd) {
-			LOG_ERROR("links_register: Duplicate file descriptor");
-			return -EINVAL;
-		}
-	}
-
-	lc = malloc(sizeof(*lc));
-	if (!lc)
-		return -ENOMEM;
-
-	lc->fd = fd;
-	lc->name = name;
-	lc->data = data;
-	lc->callback = callback;
-
-	if (!free_pfds) {
-		struct pollfd *tmp;
-		tmp = realloc(pfds, sizeof(struct pollfd) * ((used_pfds*2) + 1));
-		if (!tmp) {
-			free(lc);
-			return -ENOMEM;
-		}
-
-		pfds = tmp;
-		free_pfds = used_pfds + 1;
-	}
-
-	free_pfds--;
-	pfds[used_pfds].fd = fd;
-	pfds[used_pfds].events = POLLIN;
-	pfds[used_pfds].revents = 0;
-	used_pfds++;
-
-	lc->next = callbacks;
-	callbacks = lc;
-	LOG_DBG("Adding %s/%d", lc->name, lc->fd);
-	LOG_DBG(" used_pfds = %u, free_pfds = %u",
-		used_pfds, free_pfds);
-
-	return 0;
-}
-
-int links_unregister(int fd)
-{
-	unsigned i;
-	struct link_callback *p, *c;
-
-	for (i = 0; i < used_pfds; i++)
-		if (fd == pfds[i].fd) {
-			/* entire struct is copied (overwritten) */
-			pfds[i] = pfds[used_pfds - 1];
-			used_pfds--;
-			free_pfds++;
-		}
-
-	for (p = NULL, c = callbacks; c; p = c, c = c->next)
-		if (fd == c->fd) {
-			LOG_DBG("Freeing up %s/%d", c->name, c->fd);
-			LOG_DBG(" used_pfds = %u, free_pfds = %u",
-				used_pfds, free_pfds);
-			if (p)
-				p->next = c->next;
-			else
-				callbacks = c->next;
-			free(c);
-			break;
-		}
-
-	return 0;
-}
-
-int links_monitor(void)
-{
-	unsigned i;
-	int r;
-
-	for (i = 0; i < used_pfds; i++) {
-		pfds[i].revents = 0;
-	}
-
-	r = poll(pfds, used_pfds, -1);
-	if (r <= 0)
-		return r;
-
-	r = 0;
-	/* FIXME: handle POLLHUP */
-	for (i = 0; i < used_pfds; i++)
-		if (pfds[i].revents & POLLIN) {
-			LOG_DBG("Data ready on %d", pfds[i].fd);
-
-			/* FIXME: Add this back return 1;*/
-			r++;
-		}
-
-	return r;
-}
-
-int links_issue_callbacks(void)
-{
-	unsigned i;
-	struct link_callback *lc;
-
-	for (i = 0; i < used_pfds; i++)
-		if (pfds[i].revents & POLLIN)
-			for (lc = callbacks; lc; lc = lc->next)
-				if (pfds[i].fd == lc->fd) {
-					LOG_DBG("Issuing callback on %s/%d",
-						lc->name, lc->fd);
-					lc->callback(lc->data);
-					break;
-				}
-	return 0;
-}

daemons/cmirrord/link_mon.h

@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef _LVM_CLOG_LINK_MON_H
-#define _LVM_CLOG_LINK_MON_H
-
-int links_register(int fd, const char *name, int (*callback)(void *data), void *data);
-int links_unregister(int fd);
-int links_monitor(void);
-int links_issue_callbacks(void);
-
-#endif /* _LVM_CLOG_LINK_MON_H */

daemons/cmirrord/local.c

@@ -1,424 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include "logging.h"
-#include "common.h"
-#include "functions.h"
-#include "link_mon.h"
-#include "local.h"
-
-#include <errno.h>
-#include <sys/socket.h>
-#include <linux/connector.h>
-#include <linux/netlink.h>
-#include <unistd.h>
-
-#ifndef CN_IDX_DM
-/* Kernel 2.6.31 is required to run this code */
-#define CN_IDX_DM                       0x7     /* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG         0x1
-#endif
-
-static int cn_fd = -1;  /* Connector (netlink) socket fd */
-static char recv_buf[2048];
-static char send_buf[2048];
-
-
-/* FIXME: merge this function with kernel_send_helper */
-static int kernel_ack(uint32_t seq, int error)
-{
-	int r;
-	struct nlmsghdr *nlh = (struct nlmsghdr *)send_buf;
-	struct cn_msg *msg = NLMSG_DATA(nlh);
-
-	if (error < 0) {
-		LOG_ERROR("Programmer error: error codes must be positive");
-		return -EINVAL;
-	}
-
-	memset(send_buf, 0, sizeof(send_buf));
-
-	nlh->nlmsg_seq = 0;
-	nlh->nlmsg_pid = getpid();
-	nlh->nlmsg_type = NLMSG_DONE;
-	nlh->nlmsg_len = NLMSG_LENGTH(sizeof(struct cn_msg));
-	nlh->nlmsg_flags = 0;
-
-	msg->len = 0;
-	msg->id.idx = CN_IDX_DM;
-	msg->id.val = CN_VAL_DM_USERSPACE_LOG;
-	msg->seq = seq;
-	msg->ack = error;
-
-	r = send(cn_fd, nlh, NLMSG_LENGTH(sizeof(struct cn_msg)), 0);
-	/* FIXME: do better error processing */
-	if (r <= 0)
-		return -EBADE;
-
-	return 0;
-}
-
-
-/*
- * kernel_recv
- * @rq: the newly allocated request from kernel
- *
- * Read requests from the kernel and allocate space for the new request.
- * If there is no request from the kernel, *rq is NULL.
- *
- * This function is not thread safe due to returned stack pointer.  In fact,
- * the returned pointer must not be in-use when this function is called again.
- *
- * Returns: 0 on success, -EXXX on error
- */
-static int kernel_recv(struct clog_request **rq)
-{
-	int r = 0;
-	ssize_t len;
-	char *foo;
-	struct cn_msg *msg;
-	struct dm_ulog_request *u_rq;
-	struct nlmsghdr *nlmsg_h;
-
-	*rq = NULL;
-	memset(recv_buf, 0, sizeof(recv_buf));
-
-	len = recv(cn_fd, recv_buf, sizeof(recv_buf), 0);
-	if (len < 0) {
-		LOG_ERROR("Failed to recv message from kernel");
-		r = -errno;
-		goto fail;
-	}
-
-	nlmsg_h = (struct nlmsghdr *)recv_buf;
-	switch (nlmsg_h->nlmsg_type) {
-	case NLMSG_ERROR:
-		LOG_ERROR("Unable to recv message from kernel: NLMSG_ERROR");
-		r = -EBADE;
-		goto fail;
-	case NLMSG_DONE:
-		msg = (struct cn_msg *)NLMSG_DATA((struct nlmsghdr *)recv_buf);
-		len -= (ssize_t)sizeof(struct nlmsghdr);
-
-		if (len < (ssize_t)sizeof(struct cn_msg)) {
-			LOG_ERROR("Incomplete request from kernel received");
-			r = -EBADE;
-			goto fail;
-		}
-
-		if (msg->len > DM_ULOG_REQUEST_SIZE) {
-			LOG_ERROR("Not enough space to receive kernel request (%d/%d)",
-				  msg->len, DM_ULOG_REQUEST_SIZE);
-			r = -EBADE;
-			goto fail;
-		}
-
-		if (!msg->len)
-			LOG_ERROR("Zero length message received");
-
-		len -= (ssize_t)sizeof(struct cn_msg);
-
-		if (len < msg->len)
-			LOG_ERROR("len = %zd, msg->len = %" PRIu16, len, msg->len);
-
-		msg->data[msg->len] = '\0'; /* Cleaner way to ensure this? */
-		u_rq = (struct dm_ulog_request *)msg->data;
-
-		if (!u_rq->request_type) {
-			LOG_DBG("Bad transmission, requesting resend [%u]",
-				msg->seq);
-			r = -EAGAIN;
-
-			if (kernel_ack(msg->seq, EAGAIN)) {
-				LOG_ERROR("Failed to NACK kernel transmission [%u]",
-					  msg->seq);
-				r = -EBADE;
-			}
-		}
-
-		/*
-		 * Now we've got sizeof(struct cn_msg) + sizeof(struct nlmsghdr)
-		 * worth of space that precede the request structure from the
-		 * kernel.  Since that space isn't going to be used again, we
-		 * can take it for our purposes; rather than allocating a whole
-		 * new structure and doing a memcpy.
-		 *
-		 * We should really make sure 'clog_request' doesn't grow
-		 * beyond what is available to us, but we need only check it
-		 * once... perhaps at compile time?
-		 */
-		foo = (char *)u_rq;
-		foo -= (sizeof(struct clog_request) - sizeof(struct dm_ulog_request));
-		*rq = (struct clog_request *) foo;
-
-		/* Clear the wrapper container fields */
-		memset(*rq, 0, (size_t)((char *)u_rq - (char *)(*rq)));
-		break;
-	default:
-		LOG_ERROR("Unknown nlmsg_type");
-		r = -EBADE;
-	}
-
-fail:
-	if (r)
-		*rq = NULL;
-
-	return (r == -EAGAIN) ? 0 : r;
-}
-
-static int kernel_send_helper(void *data, uint16_t out_size)
-{
-	int r;
-	struct nlmsghdr *nlh;
-	struct cn_msg *msg;
-
-	memset(send_buf, 0, sizeof(send_buf));
-
-	nlh = (struct nlmsghdr *)send_buf;
-	nlh->nlmsg_seq = 0;  /* FIXME: Is this used? */
-	nlh->nlmsg_pid = getpid();
-	nlh->nlmsg_type = NLMSG_DONE;
-	nlh->nlmsg_len = NLMSG_LENGTH(out_size + sizeof(struct cn_msg));
-	nlh->nlmsg_flags = 0;
-
-	msg = NLMSG_DATA(nlh);
-	memcpy(msg->data, data, out_size);
-	msg->len = out_size;
-	msg->id.idx = CN_IDX_DM;
-	msg->id.val = CN_VAL_DM_USERSPACE_LOG;
-	msg->seq = 0;
-
-	r = send(cn_fd, nlh, NLMSG_LENGTH(out_size + sizeof(struct cn_msg)), 0);
-	/* FIXME: do better error processing */
-	if (r <= 0)
-		return -EBADE;
-
-	return 0;
-}
-
-/*
- * do_local_work
- *
- * Any processing errors are placed in the 'rq'
- * structure to be reported back to the kernel.
- * It may be pointless for this function to
- * return an int.
- *
- * Returns: 0 on success, -EXXX on failure
- */
-static int do_local_work(void *data __attribute__((unused)))
-{
-	int r;
-	struct clog_request *rq;
-	struct dm_ulog_request *u_rq = NULL;
-
-	r = kernel_recv(&rq);
-	if (r)
-		return r;
-
-	if (!rq)
-		return 0;
-
-	u_rq = &rq->u_rq;
-	LOG_DBG("[%s]  Request from kernel received: [%s/%u]",
-		SHORT_UUID(u_rq->uuid), RQ_TYPE(u_rq->request_type),
-		u_rq->seq);
-	switch (u_rq->request_type) {
-	case DM_ULOG_CTR:
-	case DM_ULOG_DTR:
-	case DM_ULOG_GET_REGION_SIZE:
-	case DM_ULOG_IN_SYNC:
-	case DM_ULOG_GET_SYNC_COUNT:
-	case DM_ULOG_STATUS_TABLE:
-	case DM_ULOG_PRESUSPEND:
-		/* We do not specify ourselves as server here */
-		r = do_request(rq, 0);
-		if (r)
-			LOG_DBG("Returning failed request to kernel [%s]",
-				RQ_TYPE(u_rq->request_type));
-		r = kernel_send(u_rq);
-		if (r)
-			LOG_ERROR("Failed to respond to kernel [%s]",
-				  RQ_TYPE(u_rq->request_type));
-
-		break;
-	case DM_ULOG_RESUME:
-		/*
-		 * Resume is a special case that requires a local
-		 * component to join the CPG, and a cluster component
-		 * to handle the request.
-		 */
-		r = local_resume(u_rq);
-		if (r) {
-			LOG_DBG("Returning failed request to kernel [%s]",
-				RQ_TYPE(u_rq->request_type));
-			r = kernel_send(u_rq);
-			if (r)
-				LOG_ERROR("Failed to respond to kernel [%s]",
-					  RQ_TYPE(u_rq->request_type));
-			break;
-		}
-		/* ELSE, fall through */
-	case DM_ULOG_IS_CLEAN:
-	case DM_ULOG_FLUSH:
-	case DM_ULOG_MARK_REGION:
-	case DM_ULOG_GET_RESYNC_WORK:
-	case DM_ULOG_SET_REGION_SYNC:
-	case DM_ULOG_STATUS_INFO:
-	case DM_ULOG_IS_REMOTE_RECOVERING:
-	case DM_ULOG_POSTSUSPEND:
-		r = cluster_send(rq);
-		if (r) {
-			u_rq->data_size = 0;
-			u_rq->error = r;
-			if (kernel_send(u_rq))
-				LOG_ERROR("Failed to respond to kernel [%s]",
-					  RQ_TYPE(u_rq->request_type));
-		}
-
-		break;
-	case DM_ULOG_CLEAR_REGION:
-		r = kernel_ack(u_rq->seq, 0);
-
-		r = cluster_send(rq);
-		if (r) {
-			/*
-			 * FIXME: store error for delivery on flush
-			 *        This would allow us to optimize MARK_REGION
-			 *        too.
-			 */
-		}
-
-		break;
-	default:
-		LOG_ERROR("Invalid log request received (%u), ignoring.",
-			  u_rq->request_type);
-
-		return 0;
-	}
-
-	if (r && !u_rq->error)
-		u_rq->error = r;
-
-	return r;
-}
-
-/*
- * kernel_send
- * @u_rq: result to pass back to kernel
- *
- * This function returns the u_rq structure
- * (containing the results) to the kernel.
- * It then frees the structure.
- *
- * WARNING: should the structure be freed if
- * there is an error?  I vote 'yes'.  If the
- * kernel doesn't get the response, it should
- * resend the request.
- *
- * Returns: 0 on success, -EXXX on failure
- */
-int kernel_send(struct dm_ulog_request *u_rq)
-{
-	int r;
-	uint16_t size;
-
-	if (!u_rq)
-		return -EINVAL;
-
-	size = (uint16_t)(sizeof(struct dm_ulog_request) + u_rq->data_size);
-
-	if (!u_rq->data_size && !u_rq->error) {
-		/* An ACK is all that is needed */
-
-		/* FIXME: add ACK code */
-	} else if (size > DM_ULOG_REQUEST_SIZE) {
-		/*
-		 * If we gotten here, we've already overrun
-		 * our allotted space somewhere.
-		 *
-		 * We must do something, because the kernel
-		 * is waiting for a response.
-		 */
-		LOG_ERROR("Not enough space to respond to server");
-		u_rq->error = -ENOSPC;
-		size = sizeof(struct dm_ulog_request);
-	}
-
-	r = kernel_send_helper(u_rq, size);
-	if (r)
-		LOG_ERROR("Failed to send msg to kernel.");
-
-	return r;
-}
-
-/*
- * init_local
- *
- * Initialize kernel communication socket (netlink)
- *
- * Returns: 0 on success, values from common.h on failure
- */
-int init_local(void)
-{
-	int r = 0;
-	unsigned opt;
-	struct sockaddr_nl addr;
-
-	cn_fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
-	if (cn_fd < 0)
-		return EXIT_KERNEL_SOCKET;
-
-	/* memset to fix valgrind complaint */
-	memset(&addr, 0, sizeof(struct sockaddr_nl));
-
-	addr.nl_family = AF_NETLINK;
-	addr.nl_groups = CN_IDX_DM;
-	addr.nl_pid = 0;
-
-	r = bind(cn_fd, (struct sockaddr *) &addr, sizeof(addr));
-	if (r < 0) {
-		if (close(cn_fd))
-			LOG_ERROR("Failed to close socket: %s",
-				  strerror(errno));
-		return EXIT_KERNEL_BIND;
-	}
-
-	opt = addr.nl_groups;
-	r = setsockopt(cn_fd, 270, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
-	if (r) {
-		if (close(cn_fd))
-			LOG_ERROR("Failed to close socket: %s",
-				  strerror(errno));
-		return EXIT_KERNEL_SETSOCKOPT;
-	}
-
-	/*
-	r = fcntl(cn_fd, F_SETFL, FNDELAY);
-	*/
-
-	links_register(cn_fd, "local", do_local_work, NULL);
-
-	return 0;
-}
-
-/*
- * cleanup_local
- *
- * Clean up before exiting
- */
-void cleanup_local(void)
-{
-	links_unregister(cn_fd);
-	if (cn_fd >= 0 && close(cn_fd))
-		LOG_ERROR("Failed to close socket: %s",
-			  strerror(errno));
-}

daemons/cmirrord/local.h

@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef _LVM_CLOG_LOCAL_H
-#define _LVM_CLOG_LOCAL_H
-
-int init_local(void);
-void cleanup_local(void);
-
-int kernel_send(struct dm_ulog_request *rq);
-
-#endif /* _LVM_CLOG_LOCAL_H */

daemons/cmirrord/logging.c

@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include "logging.h"
-
-const char *__rq_types_off_by_one[] = {
-	"DM_ULOG_CTR",
-	"DM_ULOG_DTR",
-	"DM_ULOG_PRESUSPEND",
-	"DM_ULOG_POSTSUSPEND",
-	"DM_ULOG_RESUME",
-	"DM_ULOG_GET_REGION_SIZE",
-	"DM_ULOG_IS_CLEAN",
-	"DM_ULOG_IN_SYNC",
-	"DM_ULOG_FLUSH",
-	"DM_ULOG_MARK_REGION",
-	"DM_ULOG_CLEAR_REGION",
-	"DM_ULOG_GET_RESYNC_WORK",
-	"DM_ULOG_SET_REGION_SYNC",
-	"DM_ULOG_GET_SYNC_COUNT",
-	"DM_ULOG_STATUS_INFO",
-	"DM_ULOG_STATUS_TABLE",
-	"DM_ULOG_IS_REMOTE_RECOVERING",
-	NULL
-};
-
-int log_tabbing = 0;
-int log_is_open = 0;
-
-/*
- * Variables for various conditional logging
- */
-#ifdef MEMB
-int log_membership_change = 1;
-#else
-int log_membership_change = 0;
-#endif
-
-#ifdef CKPT
-int log_checkpoint = 1;
-#else
-int log_checkpoint = 0;
-#endif
-
-#ifdef RESEND
-int log_resend_requests = 1;
-#else
-int log_resend_requests = 0;
-#endif

daemons/cmirrord/logging.h

@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _LVM_CLOG_LOGGING_H
-#define _LVM_CLOG_LOGGING_H
-
-#define _GNU_SOURCE
-#define _FILE_OFFSET_BITS 64
-
-#include "configure.h"
-#include <stdio.h>
-#include <stdint.h>
-#include <syslog.h>
-
-/* SHORT_UUID - print last 8 chars of a string */
-#define SHORT_UUID(x) (strlen(x) > 8) ? ((x) + (strlen(x) - 8)) : (x)
-
-extern const char *__rq_types_off_by_one[];
-#define RQ_TYPE(x) __rq_types_off_by_one[(x) - 1]
-
-extern int log_tabbing;
-extern int log_is_open;
-extern int log_membership_change;
-extern int log_checkpoint;
-extern int log_resend_requests;
-
-#define LOG_OPEN(ident, option, facility) do { \
-		openlog(ident, option, facility); \
-		log_is_open = 1;		  \
-	} while (0)
-
-#define LOG_CLOSE(void) do { \
-		log_is_open = 0; \
-		closelog();	 \
-	} while (0)
-
-#define LOG_OUTPUT(level, f, arg...) do {				\
-		int __i;						\
-		char __buffer[16];					\
-		FILE *fp = (level > LOG_NOTICE) ? stderr : stdout;	\
-		if (log_is_open) {					\
-			for (__i = 0; (__i < log_tabbing) && (__i < 15); __i++) \
-				__buffer[__i] = '\t';			\
-			__buffer[__i] = '\0';				\
-			syslog(level, "%s" f "\n", __buffer, ## arg);	\
-		} else {						\
-			for (__i = 0; __i < log_tabbing; __i++)		\
-				fprintf(fp, "\t");			\
-			fprintf(fp, f "\n", ## arg);			\
-		}							\
-	} while (0)
-
-
-#ifdef DEBUG
-#define LOG_DBG(f, arg...) LOG_OUTPUT(LOG_DEBUG, f, ## arg)
-#else /* DEBUG */
-#define LOG_DBG(f, arg...) do {} while (0)
-#endif /* DEBUG */
-
-#define LOG_COND(__X, f, arg...) do {\
-		if (__X) { 	     \
-			LOG_OUTPUT(LOG_NOTICE, f, ## arg); \
-		} \
-	} while (0)
-#define LOG_PRINT(f, arg...) LOG_OUTPUT(LOG_NOTICE, f, ## arg)
-#define LOG_ERROR(f, arg...) LOG_OUTPUT(LOG_ERR, f, ## arg)
-
-#endif /* _LVM_CLOG_LOGGING_H */

daemons/dmeventd/.exported_symbols

@@ -1,4 +0,0 @@
-init_fifos
-fini_fifos
-daemon_talk
-dm_event_get_version

daemons/dmeventd/.gitignore

@@ -1 +0,0 @@
-dmeventd

daemons/dmeventd/Makefile.in

@@ -1,110 +0,0 @@
-#
-# Copyright (C) 2005-2011 Red Hat, Inc. All rights reserved.
-#
-# This file is part of the device-mapper userspace tools.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU Lesser General Public License v.2.1.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-SOURCES = libdevmapper-event.c
-SOURCES2 = dmeventd.c
-
-TARGETS = dmeventd
-
-.PHONY: install_lib_dynamic install_lib_static install_include \
-	install_pkgconfig install_dmeventd_dynamic install_dmeventd_static \
-	install_lib install_dmeventd
-
-INSTALL_DMEVENTD_TARGETS = install_dmeventd_dynamic
-INSTALL_LIB_TARGETS = install_lib_dynamic
-
-LIB_NAME = libdevmapper-event
-ifeq ("@STATIC_LINK@", "yes")
-  LIB_STATIC = $(LIB_NAME).a
-  TARGETS += $(LIB_STATIC) dmeventd.static
-  INSTALL_DMEVENTD_TARGETS += install_dmeventd_static
-  INSTALL_LIB_TARGETS += install_lib_static
-endif
-
-LIB_VERSION = $(LIB_VERSION_DM)
-LIB_SHARED = $(LIB_NAME).$(LIB_SUFFIX)
-
-CLEAN_TARGETS = dmeventd.static $(LIB_NAME).a
-
-ifneq ($(MAKECMDGOALS),device-mapper)
-  SUBDIRS+=plugins
-endif
-
-CFLOW_LIST = $(SOURCES)
-CFLOW_LIST_TARGET = $(LIB_NAME).cflow
-CFLOW_TARGET = dmeventd
-
-EXPORTED_HEADER = $(srcdir)/libdevmapper-event.h
-EXPORTED_FN_PREFIX = dm_event
-
-include $(top_builddir)/make.tmpl
-
-all: device-mapper
-device-mapper: $(TARGETS)
-
-LIBS += -ldevmapper
-LVMLIBS += -ldevmapper-event $(PTHREAD_LIBS)
-
-CFLAGS_dmeventd.o += $(EXTRA_EXEC_CFLAGS)
-
-dmeventd: $(LIB_SHARED) dmeventd.o
-	$(CC) $(CFLAGS) $(LDFLAGS) $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS) -L. -o $@ dmeventd.o \
-	$(DL_LIBS) $(LVMLIBS) $(LIBS) -rdynamic
-
-dmeventd.static: $(LIB_STATIC) dmeventd.o $(interfacebuilddir)/libdevmapper.a
-	$(CC) $(CFLAGS) $(LDFLAGS) $(ELDFLAGS) -static -L. -L$(interfacebuilddir) -o $@ \
-	dmeventd.o $(DL_LIBS) $(LVMLIBS) $(LIBS) $(STATIC_LIBS)
-
-ifeq ("@PKGCONFIG@", "yes")
-  INSTALL_LIB_TARGETS += install_pkgconfig
-endif
-
-ifneq ("$(CFLOW_CMD)", "")
-CFLOW_SOURCES = $(addprefix $(srcdir)/, $(SOURCES))
--include $(top_builddir)/libdm/libdevmapper.cflow
--include $(top_builddir)/lib/liblvm-internal.cflow
--include $(top_builddir)/lib/liblvm2cmd.cflow
--include $(top_builddir)/daemons/dmeventd/$(LIB_NAME).cflow
--include $(top_builddir)/daemons/dmeventd/plugins/mirror/$(LIB_NAME)-lvm2mirror.cflow
-endif
-
-install_include: $(srcdir)/libdevmapper-event.h
-	$(INSTALL_DATA) -D $< $(includedir)/$(<F)
-
-install_pkgconfig: libdevmapper-event.pc
-	$(INSTALL_DATA) -D $< $(pkgconfigdir)/devmapper-event.pc
-
-install_lib_dynamic: install_lib_shared
-
-install_lib_static: $(LIB_STATIC)
-	$(INSTALL_DATA) -D $< $(usrlibdir)/$(<F)
-
-install_lib: $(INSTALL_LIB_TARGETS)
-
-install_dmeventd_dynamic: dmeventd
-	$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)
-
-install_dmeventd_static: dmeventd.static
-	$(INSTALL_PROGRAM) -D $< $(staticdir)/$(<F)
-
-install_dmeventd: $(INSTALL_DMEVENTD_TARGETS)
-
-install: install_include install_lib install_dmeventd
-
-install_device-mapper: install_include install_lib install_dmeventd
-
-DISTCLEAN_TARGETS += libdevmapper-event.pc

daemons/dmeventd/dmeventd.h

@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2005-2007 Red Hat, Inc. All rights reserved.
- *
- * This file is part of the device-mapper userspace tools.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef __DMEVENTD_DOT_H__
-#define __DMEVENTD_DOT_H__
-
-/* FIXME This stuff must be configurable. */
-
-#define	DM_EVENT_FIFO_CLIENT	DEFAULT_DM_RUN_DIR "/dmeventd-client"
-#define	DM_EVENT_FIFO_SERVER	DEFAULT_DM_RUN_DIR "/dmeventd-server"
-
-#define DM_EVENT_DEFAULT_TIMEOUT 10
-
-/* Commands for the daemon passed in the message below. */
-enum dm_event_command {
-	DM_EVENT_CMD_ACTIVE = 1,
-	DM_EVENT_CMD_REGISTER_FOR_EVENT,
-	DM_EVENT_CMD_UNREGISTER_FOR_EVENT,
-	DM_EVENT_CMD_GET_REGISTERED_DEVICE,
-	DM_EVENT_CMD_GET_NEXT_REGISTERED_DEVICE,
-	DM_EVENT_CMD_SET_TIMEOUT,
-	DM_EVENT_CMD_GET_TIMEOUT,
-	DM_EVENT_CMD_HELLO,
-	DM_EVENT_CMD_DIE,
-	DM_EVENT_CMD_GET_STATUS,
-	DM_EVENT_CMD_GET_PARAMETERS,
-};
-
-/* Message passed between client and daemon. */
-struct dm_event_daemon_message {
-	uint32_t cmd;
-	uint32_t size;
-	char *data;
-};
-
-/* FIXME Is this meant to be exported?  I can't see where the
-   interface uses it. */
-/* Fifos for client/daemon communication. */
-struct dm_event_fifos {
-	int client;
-	int server;
-	const char *client_path;
-	const char *server_path;
-};
-
-/*      EXIT_SUCCESS             0 -- stdlib.h */
-/*      EXIT_FAILURE             1 -- stdlib.h */
-/*      EXIT_LOCKFILE_INUSE      2 -- obsoleted */
-#define EXIT_DESC_CLOSE_FAILURE  3
-#define EXIT_DESC_OPEN_FAILURE   4
-/*      EXIT_OPEN_PID_FAILURE    5 -- obsoleted */
-#define EXIT_FIFO_FAILURE        6
-#define EXIT_CHDIR_FAILURE       7
-
-/* Implemented in libdevmapper-event.c, but not part of public API. */
-// FIXME  misuse of bitmask as enum
-int daemon_talk(struct dm_event_fifos *fifos,
-		struct dm_event_daemon_message *msg, int cmd,
-		const char *dso_name, const char *dev_name,
-		enum dm_event_mask evmask, uint32_t timeout);
-int init_fifos(struct dm_event_fifos *fifos);
-void fini_fifos(struct dm_event_fifos *fifos);
-int dm_event_get_version(struct dm_event_fifos *fifos, int *version);
-
-#endif /* __DMEVENTD_DOT_H__ */

daemons/dmeventd/libdevmapper-event.c

@@ -1,995 +0,0 @@
-/*
- * Copyright (C) 2005-2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of the device-mapper userspace tools.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "dm-logging.h"
-#include "dmlib.h"
-#include "libdevmapper-event.h"
-#include "dmeventd.h"
-
-#include <fcntl.h>
-#include <sys/file.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <arpa/inet.h>		/* for htonl, ntohl */
-#include <pthread.h>
-#include <syslog.h>
-
-static int _debug_level = 0;
-static int _use_syslog = 0;
-static int _sequence_nr = 0;
-
-struct dm_event_handler {
-	char *dso;
-
-	char *dmeventd_path;
-
-	char *dev_name;
-
-	char *uuid;
-	int major;
-	int minor;
-	uint32_t timeout;
-
-	enum dm_event_mask mask;
-};
-
-static void _dm_event_handler_clear_dev_info(struct dm_event_handler *dmevh)
-{
-	dm_free(dmevh->dev_name);
-	dm_free(dmevh->uuid);
-	dmevh->dev_name = dmevh->uuid = NULL;
-	dmevh->major = dmevh->minor = 0;
-}
-
-struct dm_event_handler *dm_event_handler_create(void)
-{
-	struct dm_event_handler *dmevh;
-
-	if (!(dmevh = dm_zalloc(sizeof(*dmevh)))) {
-		log_error("Failed to allocate event handler.");
-		return NULL;
-	}
-
-	return dmevh;
-}
-
-void dm_event_handler_destroy(struct dm_event_handler *dmevh)
-{
-	_dm_event_handler_clear_dev_info(dmevh);
-	dm_free(dmevh->dso);
-	dm_free(dmevh->dmeventd_path);
-	dm_free(dmevh);
-}
-
-int dm_event_handler_set_dmeventd_path(struct dm_event_handler *dmevh, const char *dmeventd_path)
-{
-	if (!dmeventd_path) /* noop */
-		return 0;
-
-	dm_free(dmevh->dmeventd_path);
-
-	if (!(dmevh->dmeventd_path = dm_strdup(dmeventd_path)))
-		return -ENOMEM;
-
-	return 0;
-}
-
-int dm_event_handler_set_dso(struct dm_event_handler *dmevh, const char *path)
-{
-	if (!path) /* noop */
-		return 0;
-
-	dm_free(dmevh->dso);
-
-	if (!(dmevh->dso = dm_strdup(path)))
-		return -ENOMEM;
-
-	return 0;
-}
-
-int dm_event_handler_set_dev_name(struct dm_event_handler *dmevh, const char *dev_name)
-{
-	if (!dev_name)
-		return 0;
-
-	_dm_event_handler_clear_dev_info(dmevh);
-
-	if (!(dmevh->dev_name = dm_strdup(dev_name)))
-		return -ENOMEM;
-
-	return 0;
-}
-
-int dm_event_handler_set_uuid(struct dm_event_handler *dmevh, const char *uuid)
-{
-	if (!uuid)
-		return 0;
-
-	_dm_event_handler_clear_dev_info(dmevh);
-
-	if (!(dmevh->uuid = dm_strdup(uuid)))
-		return -ENOMEM;
-
-	return 0;
-}
-
-void dm_event_handler_set_major(struct dm_event_handler *dmevh, int major)
-{
-	int minor = dmevh->minor;
-
-	_dm_event_handler_clear_dev_info(dmevh);
-
-	dmevh->major = major;
-	dmevh->minor = minor;
-}
-
-void dm_event_handler_set_minor(struct dm_event_handler *dmevh, int minor)
-{
-	int major = dmevh->major;
-
-	_dm_event_handler_clear_dev_info(dmevh);
-
-	dmevh->major = major;
-	dmevh->minor = minor;
-}
-
-void dm_event_handler_set_event_mask(struct dm_event_handler *dmevh,
-				     enum dm_event_mask evmask)
-{
-	dmevh->mask = evmask;
-}
-
-void dm_event_handler_set_timeout(struct dm_event_handler *dmevh, int timeout)
-{
-	dmevh->timeout = timeout;
-}
-
-const char *dm_event_handler_get_dso(const struct dm_event_handler *dmevh)
-{
-	return dmevh->dso;
-}
-
-const char *dm_event_handler_get_dev_name(const struct dm_event_handler *dmevh)
-{
-	return dmevh->dev_name;
-}
-
-const char *dm_event_handler_get_uuid(const struct dm_event_handler *dmevh)
-{
-	return dmevh->uuid;
-}
-
-int dm_event_handler_get_major(const struct dm_event_handler *dmevh)
-{
-	return dmevh->major;
-}
-
-int dm_event_handler_get_minor(const struct dm_event_handler *dmevh)
-{
-	return dmevh->minor;
-}
-
-int dm_event_handler_get_timeout(const struct dm_event_handler *dmevh)
-{
-	return dmevh->timeout;
-}
-
-enum dm_event_mask dm_event_handler_get_event_mask(const struct dm_event_handler *dmevh)
-{
-	return dmevh->mask;
-}
-
-static int _check_message_id(struct dm_event_daemon_message *msg)
-{
-	int pid, seq_nr;
-
-	if ((sscanf(msg->data, "%d:%d", &pid, &seq_nr) != 2) ||
-	    (pid != getpid()) || (seq_nr != _sequence_nr)) {
-		log_error("Ignoring out-of-sequence reply from dmeventd. "
-			  "Expected %d:%d but received %s.", getpid(),
-			  _sequence_nr, msg->data);
-		return 0;
-	}
-
-	return 1;
-}
-
-/*
- * daemon_read
- * @fifos
- * @msg
- *
- * Read message from daemon.
- *
- * Returns: 0 on failure, 1 on success
- */
-static int _daemon_read(struct dm_event_fifos *fifos,
-			struct dm_event_daemon_message *msg)
-{
-	unsigned bytes = 0;
-	int ret, i;
-	fd_set fds;
-	size_t size = 2 * sizeof(uint32_t);	/* status + size */
-	uint32_t *header = alloca(size);
-	char *buf = (char *)header;
-
-	while (bytes < size) {
-		for (i = 0, ret = 0; (i < 20) && (ret < 1); i++) {
-			/* Watch daemon read FIFO for input. */
-			struct timeval tval = { .tv_sec = 1 };
-			FD_ZERO(&fds);
-			FD_SET(fifos->server, &fds);
-			ret = select(fifos->server + 1, &fds, NULL, NULL, &tval);
-			if (ret < 0 && errno != EINTR) {
-				log_error("Unable to read from event server.");
-				return 0;
-			}
-			if ((ret == 0) && (i > 4) && !bytes) {
-				log_error("No input from event server.");
-				return 0;
-			}
-		}
-		if (ret < 1) {
-			log_error("Unable to read from event server.");
-			return 0;
-		}
-
-		ret = read(fifos->server, buf + bytes, size);
-		if (ret < 0) {
-			if ((errno == EINTR) || (errno == EAGAIN))
-				continue;
-			else {
-				log_error("Unable to read from event server.");
-				return 0;
-			}
-		}
-
-		bytes += ret;
-		if (header && (bytes == 2 * sizeof(uint32_t))) {
-			msg->cmd = ntohl(header[0]);
-			msg->size = ntohl(header[1]);
-			buf = msg->data = dm_malloc(msg->size);
-			size = msg->size;
-			bytes = 0;
-			header = 0;
-		}
-	}
-
-	if (bytes != size) {
-		dm_free(msg->data);
-		msg->data = NULL;
-	}
-	return bytes == size;
-}
-
-/* Write message to daemon. */
-static int _daemon_write(struct dm_event_fifos *fifos,
-			 struct dm_event_daemon_message *msg)
-{
-	int ret;
-	fd_set fds;
-	size_t bytes = 0;
-	size_t size = 2 * sizeof(uint32_t) + msg->size;
-	uint32_t *header = alloca(size);
-	char *buf = (char *)header;
-	char drainbuf[128];
-
-	header[0] = htonl(msg->cmd);
-	header[1] = htonl(msg->size);
-	memcpy(buf + 2 * sizeof(uint32_t), msg->data, msg->size);
-
-	/* drain the answer fifo */
-	while (1) {
-		struct timeval tval = { .tv_usec = 100 };
-		FD_ZERO(&fds);
-		FD_SET(fifos->server, &fds);
-		ret = select(fifos->server + 1, &fds, NULL, NULL, &tval);
-		if (ret < 0) {
-			if (errno == EINTR)
-				continue;
-			log_error("Unable to talk to event daemon.");
-			return 0;
-		}
-		if (ret == 0)
-			break;
-		ret = read(fifos->server, drainbuf, sizeof(drainbuf));
-		if (ret < 0) {
-			if ((errno == EINTR) || (errno == EAGAIN))
-				continue;
-			log_error("Unable to talk to event daemon.");
-			return 0;
-		}
-	}
-
-	while (bytes < size) {
-		do {
-			/* Watch daemon write FIFO to be ready for output. */
-			FD_ZERO(&fds);
-			FD_SET(fifos->client, &fds);
-			ret = select(fifos->client + 1, NULL, &fds, NULL, NULL);
-			if ((ret < 0) && (errno != EINTR)) {
-				log_error("Unable to talk to event daemon.");
-				return 0;
-			}
-		} while (ret < 1);
-
-		ret = write(fifos->client, buf + bytes, size - bytes);
-		if (ret < 0) {
-			if ((errno == EINTR) || (errno == EAGAIN))
-				continue;
-			else {
-				log_error("Unable to talk to event daemon.");
-				return 0;
-			}
-		}
-
-		bytes += ret;
-	}
-
-	return bytes == size;
-}
-
-int daemon_talk(struct dm_event_fifos *fifos,
-		struct dm_event_daemon_message *msg, int cmd,
-		const char *dso_name, const char *dev_name,
-		enum dm_event_mask evmask, uint32_t timeout)
-{
-	int msg_size;
-	memset(msg, 0, sizeof(*msg));
-
-	/*
-	 * Set command and pack the arguments
-	 * into ASCII message string.
-	 */
-	if ((msg_size =
-	     ((cmd == DM_EVENT_CMD_HELLO) ?
-	      dm_asprintf(&(msg->data), "%d:%d HELLO", getpid(), _sequence_nr) :
-	      dm_asprintf(&(msg->data), "%d:%d %s %s %u %" PRIu32,
-			  getpid(), _sequence_nr,
-			  dso_name ? : "-", dev_name ? : "-", evmask, timeout)))
-	    < 0) {
-		log_error("_daemon_talk: message allocation failed.");
-		return -ENOMEM;
-	}
-	msg->cmd = cmd;
-	msg->size = msg_size;
-
-	/*
-	 * Write command and message to and
-	 * read status return code from daemon.
-	 */
-	if (!_daemon_write(fifos, msg)) {
-		stack;
-		dm_free(msg->data);
-		msg->data = NULL;
-		return -EIO;
-	}
-
-	do {
-		dm_free(msg->data);
-		msg->data = NULL;
-
-		if (!_daemon_read(fifos, msg)) {
-			stack;
-			return -EIO;
-		}
-	} while (!_check_message_id(msg));
-
-	_sequence_nr++;
-
-	return (int32_t) msg->cmd;
-}
-
-/*
- * start_daemon
- *
- * This function forks off a process (dmeventd) that will handle
- * the events.  I am currently test opening one of the fifos to
- * ensure that the daemon is running and listening...  I thought
- * this would be less expensive than fork/exec'ing every time.
- * Perhaps there is an even quicker/better way (no, checking the
- * lock file is _not_ a better way).
- *
- * Returns: 1 on success, 0 otherwise
- */
-static int _start_daemon(char *dmeventd_path, struct dm_event_fifos *fifos)
-{
-	int pid, ret = 0;
-	int status;
-	struct stat statbuf;
-	char default_dmeventd_path[] = DMEVENTD_PATH;
-	char *args[] = { dmeventd_path ? : default_dmeventd_path, NULL };
-
-	/*
-	 * FIXME Explicitly verify the code's requirement that client_path is secure:
-	 * - All parent directories owned by root without group/other write access unless sticky.
-	 */
-
-	/* If client fifo path exists, only use it if it is root-owned fifo mode 0600 */
-	if ((lstat(fifos->client_path, &statbuf) < 0)) {
-		if (errno == ENOENT)
-			/* Jump ahead if fifo does not already exist. */
-			goto start_server;
-		else {
-			log_sys_error("stat", fifos->client_path);
-			return 0;
-		}
-	} else if (!S_ISFIFO(statbuf.st_mode)) {
-		log_error("%s must be a fifo.", fifos->client_path);
-		return 0;
-	} else if (statbuf.st_uid) {
-		log_error("%s must be owned by uid 0.", fifos->client_path);
-		return 0;
-	} else if (statbuf.st_mode & (S_IEXEC | S_IRWXG | S_IRWXO)) {
-		log_error("%s must have mode 0600.", fifos->client_path);
-		return 0;
-	}
-
-	/* Anyone listening?  If not, errno will be ENXIO */
-	fifos->client = open(fifos->client_path, O_WRONLY | O_NONBLOCK);
-	if (fifos->client >= 0) {
-		/* Should never happen if all the above checks passed. */
-		if ((fstat(fifos->client, &statbuf) < 0) ||
-		    !S_ISFIFO(statbuf.st_mode) || statbuf.st_uid ||
-		    (statbuf.st_mode & (S_IEXEC | S_IRWXG | S_IRWXO))) {
-			log_error("%s is no longer a secure root-owned fifo with mode 0600.", fifos->client_path);
-			if (close(fifos->client))
-				log_sys_debug("close", fifos->client_path);
-			return 0;
-		}
-
-		/* server is running and listening */
-		if (close(fifos->client))
-			log_sys_debug("close", fifos->client_path);
-		return 1;
-	} else if (errno != ENXIO && errno != ENOENT)  {
-		/* problem */
-		log_sys_error("open", fifos->client_path);
-		return 0;
-	}
-
-start_server:
-	/* server is not running */
-
-	if ((args[0][0] == '/') && stat(args[0], &statbuf)) {
-		log_sys_error("stat", args[0]);
-		return 0;
-	}
-
-	pid = fork();
-
-	if (pid < 0)
-		log_sys_error("fork", "");
-
-	else if (!pid) {
-		execvp(args[0], args);
-		log_error("Unable to exec dmeventd: %s.", strerror(errno));
-		_exit(EXIT_FAILURE);
-	} else {
-		if (waitpid(pid, &status, 0) < 0)
-			log_error("Unable to start dmeventd: %s.",
-				  strerror(errno));
-		else if (WEXITSTATUS(status))
-			log_error("Unable to start dmeventd.");
-		else
-			ret = 1;
-	}
-
-	return ret;
-}
-
-int init_fifos(struct dm_event_fifos *fifos)
-{
-	/* FIXME? Is fifo the most suitable method? Why not share
-	   comms/daemon code with something else e.g. multipath? */
-
-	/* Open the fifo used to read from the daemon. */
-	if ((fifos->server = open(fifos->server_path, O_RDWR)) < 0) {
-		log_sys_error("open", fifos->server_path);
-		return 0;
-	}
-
-	/* Lock out anyone else trying to do communication with the daemon. */
-	if (flock(fifos->server, LOCK_EX) < 0) {
-		log_sys_error("flock", fifos->server_path);
-		goto bad;
-	}
-
-/*	if ((fifos->client = open(fifos->client_path, O_WRONLY | O_NONBLOCK)) < 0) {*/
-	if ((fifos->client = open(fifos->client_path, O_RDWR | O_NONBLOCK)) < 0) {
-		log_sys_error("open", fifos->client_path);
-		goto bad;
-	}
-
-	return 1;
-bad:
-	if (close(fifos->server))
-		log_sys_debug("close", fifos->server_path);
-	fifos->server = -1;
-
-	return 0;
-}
-
-/* Initialize client. */
-static int _init_client(char *dmeventd_path, struct dm_event_fifos *fifos)
-{
-	if (!_start_daemon(dmeventd_path, fifos))
-		return_0;
-
-	return init_fifos(fifos);
-}
-
-void fini_fifos(struct dm_event_fifos *fifos)
-{
-	if (fifos->client >= 0 && close(fifos->client))
-		log_sys_debug("close", fifos->client_path);
-
-	if (fifos->server >= 0) {
-		if (flock(fifos->server, LOCK_UN))
-			log_sys_debug("flock unlock", fifos->server_path);
-
-		if (close(fifos->server))
-			log_sys_debug("close", fifos->server_path);
-	}
-}
-
-/* Get uuid of a device */
-static struct dm_task *_get_device_info(const struct dm_event_handler *dmevh)
-{
-	struct dm_task *dmt;
-	struct dm_info info;
-
-	if (!(dmt = dm_task_create(DM_DEVICE_INFO))) {
-		log_error("_get_device_info: dm_task creation for info failed.");
-		return NULL;
-	}
-
-	if (dmevh->uuid) {
-		if (!dm_task_set_uuid(dmt, dmevh->uuid))
-			goto_bad;
-	} else if (dmevh->dev_name) {
-		if (!dm_task_set_name(dmt, dmevh->dev_name))
-			goto_bad;
-	} else if (dmevh->major && dmevh->minor) {
-		if (!dm_task_set_major(dmt, dmevh->major) ||
-		    !dm_task_set_minor(dmt, dmevh->minor))
-			goto_bad;
-	}
-
-	/* FIXME Add name or uuid or devno to messages */
-	if (!dm_task_run(dmt)) {
-		log_error("_get_device_info: dm_task_run() failed.");
-		goto bad;
-	}
-
-	if (!dm_task_get_info(dmt, &info)) {
-		log_error("_get_device_info: failed to get info for device.");
-		goto bad;
-	}
-
-	if (!info.exists) {
-		log_error("_get_device_info: %s%s%s%.0d%s%.0d%s%s: device not found.",
-			  dmevh->uuid ? : "",
-			  (!dmevh->uuid && dmevh->dev_name) ? dmevh->dev_name : "",
-			  (!dmevh->uuid && !dmevh->dev_name && dmevh->major > 0) ? "(" : "",
-			  (!dmevh->uuid && !dmevh->dev_name && dmevh->major > 0) ? dmevh->major : 0,
-			  (!dmevh->uuid && !dmevh->dev_name && dmevh->major > 0) ? ":" : "",
-			  (!dmevh->uuid && !dmevh->dev_name && dmevh->minor > 0) ? dmevh->minor : 0,
-			  (!dmevh->uuid && !dmevh->dev_name && dmevh->major > 0) && dmevh->minor == 0 ? "0" : "",
-			  (!dmevh->uuid && !dmevh->dev_name && dmevh->major > 0) ? ") " : "");
-		goto bad;
-	}
-
-	return dmt;
-
-      bad:
-	dm_task_destroy(dmt);
-	return NULL;
-}
-
-/* Handle the event (de)registration call and return negative error codes. */
-static int _do_event(int cmd, char *dmeventd_path, struct dm_event_daemon_message *msg,
-		     const char *dso_name, const char *dev_name,
-		     enum dm_event_mask evmask, uint32_t timeout)
-{
-	int ret;
-	struct dm_event_fifos fifos = {
-		.server = -1,
-		.client = -1,
-		/* FIXME Make these either configurable or depend directly on dmeventd_path */
-		.client_path = DM_EVENT_FIFO_CLIENT,
-		.server_path = DM_EVENT_FIFO_SERVER
-	};
-
-	if (!_init_client(dmeventd_path, &fifos)) {
-		ret = -ESRCH;
-		goto_out;
-	}
-
-	ret = daemon_talk(&fifos, msg, DM_EVENT_CMD_HELLO, NULL, NULL, 0, 0);
-
-	dm_free(msg->data);
-	msg->data = 0;
-
-	if (!ret)
-		ret = daemon_talk(&fifos, msg, cmd, dso_name, dev_name, evmask, timeout);
-out:
-	/* what is the opposite of init? */
-	fini_fifos(&fifos);
-
-	return ret;
-}
-
-/* External library interface. */
-int dm_event_register_handler(const struct dm_event_handler *dmevh)
-{
-	int ret = 1, err;
-	const char *uuid;
-	struct dm_task *dmt;
-	struct dm_event_daemon_message msg = { 0 };
-
-	if (!(dmt = _get_device_info(dmevh)))
-		return_0;
-
-	uuid = dm_task_get_uuid(dmt);
-
-	if (!strstr(dmevh->dso, "libdevmapper-event-lvm2thin.so") &&
-	    !strstr(dmevh->dso, "libdevmapper-event-lvm2snapshot.so") &&
-	    !strstr(dmevh->dso, "libdevmapper-event-lvm2mirror.so") &&
-	    !strstr(dmevh->dso, "libdevmapper-event-lvm2raid.so"))
-		log_warn("WARNING: %s: dmeventd plugins are deprecated.", dmevh->dso);
-
-
-	if ((err = _do_event(DM_EVENT_CMD_REGISTER_FOR_EVENT, dmevh->dmeventd_path, &msg,
-			     dmevh->dso, uuid, dmevh->mask, dmevh->timeout)) < 0) {
-		log_error("%s: event registration failed: %s.",
-			  dm_task_get_name(dmt),
-			  msg.data ? msg.data : strerror(-err));
-		ret = 0;
-	}
-
-	dm_free(msg.data);
-
-	dm_task_destroy(dmt);
-
-	return ret;
-}
-
-int dm_event_unregister_handler(const struct dm_event_handler *dmevh)
-{
-	int ret = 1, err;
-	const char *uuid;
-	struct dm_task *dmt;
-	struct dm_event_daemon_message msg = { 0 };
-
-	if (!(dmt = _get_device_info(dmevh)))
-		return_0;
-
-	uuid = dm_task_get_uuid(dmt);
-
-	if ((err = _do_event(DM_EVENT_CMD_UNREGISTER_FOR_EVENT, dmevh->dmeventd_path, &msg,
-			    dmevh->dso, uuid, dmevh->mask, dmevh->timeout)) < 0) {
-		log_error("%s: event deregistration failed: %s.",
-			  dm_task_get_name(dmt),
-			  msg.data ? msg.data : strerror(-err));
-		ret = 0;
-	}
-
-	dm_free(msg.data);
-
-	dm_task_destroy(dmt);
-
-	return ret;
-}
-
-/* Fetch a string off src and duplicate it into *dest. */
-/* FIXME: move to separate module to share with the daemon. */
-static char *_fetch_string(char **src, const int delimiter)
-{
-	char *p, *ret;
-
-	if ((p = strchr(*src, delimiter)))
-		*p = 0;
-
-	if ((ret = dm_strdup(*src)))
-		*src += strlen(ret) + 1;
-
-	if (p)
-		*p = delimiter;
-
-	return ret;
-}
-
-/* Parse a device message from the daemon. */
-static int _parse_message(struct dm_event_daemon_message *msg, char **dso_name,
-			 char **uuid, enum dm_event_mask *evmask)
-{
-	char *id;
-	char *p = msg->data;
-
-	if ((id = _fetch_string(&p, ' ')) &&
-	    (*dso_name = _fetch_string(&p, ' ')) &&
-	    (*uuid = _fetch_string(&p, ' '))) {
-		*evmask = atoi(p);
-		dm_free(id);
-		return 0;
-	}
-
-	dm_free(id);
-	return -ENOMEM;
-}
-
-/*
- * Returns 0 if handler found; error (-ENOMEM, -ENOENT) otherwise.
- */
-int dm_event_get_registered_device(struct dm_event_handler *dmevh, int next)
-{
-	int ret = 0;
-	const char *uuid = NULL;
-	char *reply_dso = NULL, *reply_uuid = NULL;
-	enum dm_event_mask reply_mask = 0;
-	struct dm_task *dmt = NULL;
-	struct dm_event_daemon_message msg = { 0 };
-	struct dm_info info;
-
-	if (!(dmt = _get_device_info(dmevh))) {
-		log_debug("Device does not exists (uuid=%s, name=%s, %d:%d).",
-			  dmevh->uuid, dmevh->dev_name,
-			  dmevh->major, dmevh->minor);
-		ret = -ENODEV;
-		goto fail;
-	}
-
-	uuid = dm_task_get_uuid(dmt);
-
-	/* FIXME Distinguish errors connecting to daemon */
-	if (_do_event(next ? DM_EVENT_CMD_GET_NEXT_REGISTERED_DEVICE :
-		      DM_EVENT_CMD_GET_REGISTERED_DEVICE, dmevh->dmeventd_path,
-		      &msg, dmevh->dso, uuid, dmevh->mask, 0)) {
-		log_debug("%s: device not registered.", dm_task_get_name(dmt));
-		ret = -ENOENT;
-		goto fail;
-	}
-
-	/* FIXME this will probably horribly break if we get
-	   ill-formatted reply */
-	ret = _parse_message(&msg, &reply_dso, &reply_uuid, &reply_mask);
-
-	dm_task_destroy(dmt);
-	dmt = NULL;
-
-	dm_free(msg.data);
-	msg.data = NULL;
-
-	_dm_event_handler_clear_dev_info(dmevh);
-	if (!reply_uuid) {
-		ret = -ENXIO; /* dmeventd probably gave us bogus uuid back */
-		goto fail;
-	}
-
-	if (!(dmevh->uuid = dm_strdup(reply_uuid))) {
-		ret = -ENOMEM;
-		goto fail;
-	}
-
-	if (!(dmt = _get_device_info(dmevh))) {
-		ret = -ENXIO; /* dmeventd probably gave us bogus uuid back */
-		goto fail;
-	}
-
-	dm_event_handler_set_dso(dmevh, reply_dso);
-	dm_event_handler_set_event_mask(dmevh, reply_mask);
-
-	dm_free(reply_dso);
-	reply_dso = NULL;
-
-	dm_free(reply_uuid);
-	reply_uuid = NULL;
-
-	if (!(dmevh->dev_name = dm_strdup(dm_task_get_name(dmt)))) {
-		ret = -ENOMEM;
-		goto fail;
-	}
-
-	if (!dm_task_get_info(dmt, &info)) {
-		ret = -1;
-		goto fail;
-	}
-
-	dmevh->major = info.major;
-	dmevh->minor = info.minor;
-
-	dm_task_destroy(dmt);
-
-	return ret;
-
- fail:
-	dm_free(msg.data);
-	dm_free(reply_dso);
-	dm_free(reply_uuid);
-	_dm_event_handler_clear_dev_info(dmevh);
-	if (dmt)
-		dm_task_destroy(dmt);
-	return ret;
-}
-
-/*
- * You can (and have to) call this at the stage of the protocol where
- *     daemon_talk(fifos, &msg, DM_EVENT_CMD_HELLO, NULL, NULL, 0, 0)
- *
- * would be normally sent. This call will parse the version reply from
- * dmeventd, in addition to above call. It is not safe to call this at any
- * other place in the protocol.
- *
- * This is an internal function, not exposed in the public API.
- */
-
-int dm_event_get_version(struct dm_event_fifos *fifos, int *version) {
-	char *p;
-	struct dm_event_daemon_message msg = { 0 };
-
-	if (daemon_talk(fifos, &msg, DM_EVENT_CMD_HELLO, NULL, NULL, 0, 0))
-		return 0;
-	p = msg.data;
-	*version = 0;
-
-	if (!p || !(p = strchr(p, ' '))) /* Message ID */
-		return 0;
-	if (!(p = strchr(p + 1, ' '))) /* HELLO */
-		return 0;
-	if ((p = strchr(p + 1, ' '))) /* HELLO, once more */
-		*version = atoi(p);
-
-	return 1;
-}
-
-void dm_event_log_set(int debug_log_level, int use_syslog)
-{
-	_debug_level = debug_log_level;
-	_use_syslog = use_syslog;
-}
-
-void dm_event_log(const char *subsys, int level, const char *file,
-		  int line, int dm_errno_or_class,
-		  const char *format, va_list ap)
-{
-	static int _abort_on_internal_errors = -1;
-	static pthread_mutex_t _log_mutex = PTHREAD_MUTEX_INITIALIZER;
-	static time_t start = 0;
-	const char *indent = "";
-	FILE *stream = log_stderr(level) ? stderr : stdout;
-	int prio;
-	time_t now;
-	int log_with_debug = 0;
-
-	if (subsys[0] == '#') {
-		/* Subsystems starting with '#' are logged
-		 * only when debugging is enabled. */
-		log_with_debug++;
-		subsys++;
-	}
-
-	switch (log_level(level)) {
-	case _LOG_DEBUG:
-		/* Never shown without -ddd */
-		if (_debug_level < 3)
-			return;
-		prio = LOG_DEBUG;
-		indent = "      ";
-		break;
-	case _LOG_INFO:
-		if (log_with_debug && _debug_level < 2)
-			return;
-		prio = LOG_INFO;
-		indent = "    ";
-		break;
-	case _LOG_NOTICE:
-		if (log_with_debug && _debug_level < 1)
-			return;
-		prio = LOG_NOTICE;
-		indent = "  ";
-		break;
-	case _LOG_WARN:
-		prio = LOG_WARNING;
-		break;
-	case _LOG_ERR:
-		prio = LOG_ERR;
-		stream = stderr;
-		break;
-	default:
-		prio = LOG_CRIT;
-	}
-
-	/* Serialize to keep lines readable */
-	pthread_mutex_lock(&_log_mutex);
-
-	if (_use_syslog) {
-		vsyslog(prio, format, ap);
-	} else {
-		now = time(NULL);
-		if (!start)
-			start = now;
-		now -= start;
-		if (_debug_level)
-			fprintf(stream, "[%2d:%02d] %8x:%-6s%s",
-				(int)now / 60, (int)now % 60,
-				// TODO: Maybe use shorter ID
-				// ((int)(pthread_self()) >> 6) & 0xffff,
-				(int)pthread_self(), subsys,
-				(_debug_level > 3) ? "" : indent);
-		if (_debug_level > 3)
-			fprintf(stream, "%28s:%4d %s", file, line, indent);
-		vfprintf(stream, _(format), ap);
-		fputc('\n', stream);
-		fflush(stream);
-	}
-
-	pthread_mutex_unlock(&_log_mutex);
-
-	if (_abort_on_internal_errors < 0)
-		/* Set when env DM_ABORT_ON_INTERNAL_ERRORS is not "0" */
-		_abort_on_internal_errors =
-			strcmp(getenv("DM_ABORT_ON_INTERNAL_ERRORS") ? : "0", "0");
-
-	if (_abort_on_internal_errors &&
-	    !strncmp(format, INTERNAL_ERROR, sizeof(INTERNAL_ERROR) - 1))
-		abort();
-}
-
-#if 0				/* left out for now */
-
-static char *_skip_string(char *src, const int delimiter)
-{
-	src = srtchr(src, delimiter);
-	if (src && *(src + 1))
-		return src + 1;
-	return NULL;
-}
-
-int dm_event_set_timeout(const char *device_path, uint32_t timeout)
-{
-	struct dm_event_daemon_message msg = { 0 };
-
-	if (!device_exists(device_path))
-		return -ENODEV;
-
-	return _do_event(DM_EVENT_CMD_SET_TIMEOUT, &msg,
-			 NULL, device_path, 0, timeout);
-}
-
-int dm_event_get_timeout(const char *device_path, uint32_t *timeout)
-{
-	int ret;
-	struct dm_event_daemon_message msg = { 0 };
-
-	if (!device_exists(device_path))
-		return -ENODEV;
-
-	if (!(ret = _do_event(DM_EVENT_CMD_GET_TIMEOUT, &msg, NULL, device_path,
-			     0, 0))) {
-		char *p = _skip_string(msg.data, ' ');
-		if (!p) {
-			log_error("Malformed reply from dmeventd '%s'.",
-				  msg.data);
-			dm_free(msg.data);
-			return -EIO;
-		}
-		*timeout = atoi(p);
-	}
-	dm_free(msg.data);
-
-	return ret;
-}
-#endif

daemons/dmeventd/libdevmapper-event.h

@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2005-2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of the device-mapper userspace tools.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * Note that this file is released only as part of a technology preview
- * and its contents may change in future updates in ways that do not
- * preserve compatibility.
- */
-
-#ifndef LIB_DMEVENT_H
-#define LIB_DMEVENT_H
-
-#include <stdint.h>
-
-/*
- * Event library interface.
- */
-
-enum dm_event_mask {
-	DM_EVENT_SETTINGS_MASK  = 0x0000FF,
-	DM_EVENT_SINGLE		= 0x000001, /* Report multiple errors just once. */
-	DM_EVENT_MULTI		= 0x000002, /* Report all of them. */
-
-	DM_EVENT_ERROR_MASK     = 0x00FF00,
-	DM_EVENT_SECTOR_ERROR	= 0x000100, /* Failure on a particular sector. */
-	DM_EVENT_DEVICE_ERROR	= 0x000200, /* Device failure. */
-	DM_EVENT_PATH_ERROR	= 0x000400, /* Failure on an io path. */
-	DM_EVENT_ADAPTOR_ERROR	= 0x000800, /* Failure of a host adaptor. */
-
-	DM_EVENT_STATUS_MASK    = 0xFF0000,
-	DM_EVENT_SYNC_STATUS	= 0x010000, /* Mirror synchronization completed/failed. */
-	DM_EVENT_TIMEOUT	= 0x020000, /* Timeout has occured */
-
-	DM_EVENT_REGISTRATION_PENDING = 0x1000000, /* Monitor thread is setting-up/shutting-down */
-};
-
-#define DM_EVENT_ALL_ERRORS DM_EVENT_ERROR_MASK
-#define DM_EVENT_PROTOCOL_VERSION 2
-
-struct dm_task;
-struct dm_event_handler;
-
-struct dm_event_handler *dm_event_handler_create(void);
-void dm_event_handler_destroy(struct dm_event_handler *dmevh);
-
-/*
- * Path of shared library to handle events.
- *
- * All of dmeventd, dso, device_name and uuid strings are duplicated so
- * you do not need to keep the pointers valid after the call succeeds.
- * They may return -ENOMEM though.
- */
-int dm_event_handler_set_dso(struct dm_event_handler *dmevh, const char *path);
-
-/*
- * Path of dmeventd binary.
- */
-int dm_event_handler_set_dmeventd_path(struct dm_event_handler *dmevh, const char *dmeventd_path);
-
-/*
- * Identify the device to monitor by exactly one of device_name, uuid or
- * device number. String arguments are duplicated, see above.
- */
-int dm_event_handler_set_dev_name(struct dm_event_handler *dmevh, const char *device_name);
-
-int dm_event_handler_set_uuid(struct dm_event_handler *dmevh, const char *uuid);
-
-void dm_event_handler_set_major(struct dm_event_handler *dmevh, int major);
-void dm_event_handler_set_minor(struct dm_event_handler *dmevh, int minor);
-void dm_event_handler_set_timeout(struct dm_event_handler *dmevh, int timeout);
-
-/*
- * Specify mask for events to monitor.
- */
-// FIXME  misuse of bitmask as enum
-void dm_event_handler_set_event_mask(struct dm_event_handler *dmevh,
-				     enum dm_event_mask evmask);
-
-const char *dm_event_handler_get_dso(const struct dm_event_handler *dmevh);
-const char *dm_event_handler_get_dev_name(const struct dm_event_handler *dmevh);
-const char *dm_event_handler_get_uuid(const struct dm_event_handler *dmevh);
-int dm_event_handler_get_major(const struct dm_event_handler *dmevh);
-int dm_event_handler_get_minor(const struct dm_event_handler *dmevh);
-int dm_event_handler_get_timeout(const struct dm_event_handler *dmevh);
-// FIXME  misuse of bitmask as enum
-enum dm_event_mask dm_event_handler_get_event_mask(const struct dm_event_handler *dmevh);
-
-/* FIXME Review interface (what about this next thing?) */
-int dm_event_get_registered_device(struct dm_event_handler *dmevh, int next);
-
-/*
- * Initiate monitoring using dmeventd.
- */
-int dm_event_register_handler(const struct dm_event_handler *dmevh);
-int dm_event_unregister_handler(const struct dm_event_handler *dmevh);
-
-/* Set debug level for logging, and whether to log on stdout/stderr or syslog */
-void dm_event_log_set(int debug_log_level, int use_syslog);
-
-/* Log messages acroding to current debug level  */
-__attribute__((format(printf, 6, 0)))
-void dm_event_log(const char *subsys, int level, const char *file,
-		  int line, int dm_errno_or_class,
-		  const char *format, va_list ap);
-/* Macro to route print_log do dm_event_log() */
-#define DM_EVENT_LOG_FN(subsys) \
-void print_log(int level, const char *file, int line, int dm_errno_or_class,\
-	       const char *format, ...)\
-{\
-	va_list ap;\
-	va_start(ap, format);\
-	dm_event_log(subsys, level, file, line, dm_errno_or_class, format, ap);\
-	va_end(ap);\
-}
-
-/* Prototypes for DSO interface, see dmeventd.c, struct dso_data for
-   detailed descriptions. */
-// FIXME  misuse of bitmask as enum
-void process_event(struct dm_task *dmt, enum dm_event_mask evmask, void **user);
-int register_device(const char *device_name, const char *uuid, int major, int minor, void **user);
-int unregister_device(const char *device_name, const char *uuid, int major,
-		      int minor, void **user);
-
-#endif

daemons/dmeventd/libdevmapper-event.pc.in

@@ -1,11 +0,0 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: devmapper-event
-Description: device-mapper event library
-Version: @DM_LIB_PATCHLEVEL@
-Cflags: -I${includedir}
-Libs: -L${libdir} -ldevmapper-event
-Requires.private: devmapper

daemons/dmeventd/plugins/Makefile.in

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
-# Copyright (C) 2004-2005, 2011 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-SUBDIRS += lvm2
-
-ifneq ("@MIRRORS@", "none")
-  SUBDIRS += mirror
-endif
-
-ifneq ("@SNAPSHOTS@", "none")
-  SUBDIRS += snapshot
-endif
-
-ifneq ("@RAID@", "none")
-  SUBDIRS += raid
-endif
-
-ifneq ("@THIN@", "none")
-  SUBDIRS += thin
-endif
-
-ifeq ($(MAKECMDGOALS),distclean)
-  SUBDIRS = lvm2 mirror snapshot raid thin
-endif
-
-include $(top_builddir)/make.tmpl
-
-snapshot: lvm2
-mirror: lvm2
-raid: lvm2
-thin: lvm2

daemons/dmeventd/plugins/lvm2/.exported_symbols

@@ -1,7 +0,0 @@
-dmeventd_lvm2_init
-dmeventd_lvm2_exit
-dmeventd_lvm2_lock
-dmeventd_lvm2_unlock
-dmeventd_lvm2_pool
-dmeventd_lvm2_run
-dmeventd_lvm2_command

daemons/dmeventd/plugins/lvm2/Makefile.in

@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2010-2014 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-CLDFLAGS += -L$(top_builddir)/tools
-
-SOURCES = dmeventd_lvm.c
-
-LIB_SHARED = libdevmapper-event-lvm2.$(LIB_SUFFIX)
-LIB_VERSION = $(LIB_VERSION_LVM)
-
-include $(top_builddir)/make.tmpl
-
-LIBS += @LVM2CMD_LIB@ -ldevmapper $(PTHREAD_LIBS)
-
-install_lvm2: install_lib_shared
-
-install: install_lvm2

daemons/dmeventd/plugins/lvm2/dmeventd_lvm.c

@@ -1,164 +0,0 @@
-/*
- * Copyright (C) 2010-2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "lib.h"
-#include "dmeventd_lvm.h"
-#include "libdevmapper-event.h"
-#include "lvm2cmd.h"
-
-#include <pthread.h>
-
-/*
- * register_device() is called first and performs initialisation.
- * Only one device may be registered or unregistered at a time.
- */
-static pthread_mutex_t _register_mutex = PTHREAD_MUTEX_INITIALIZER;
-
-/*
- * Number of active registrations.
- */
-static int _register_count = 0;
-static struct dm_pool *_mem_pool = NULL;
-static void *_lvm_handle = NULL;
-
-DM_EVENT_LOG_FN("#lvm")
-
-static void _lvm2_print_log(int level, const char *file, int line,
-			    int dm_errno_or_class, const char *msg)
-{
-	print_log(level, file, line, dm_errno_or_class, "%s", msg);
-}
-
-/*
- * Currently only one event can be processed at a time.
- */
-static pthread_mutex_t _event_mutex = PTHREAD_MUTEX_INITIALIZER;
-
-void dmeventd_lvm2_lock(void)
-{
-	pthread_mutex_lock(&_event_mutex);
-}
-
-void dmeventd_lvm2_unlock(void)
-{
-	pthread_mutex_unlock(&_event_mutex);
-}
-
-int dmeventd_lvm2_init(void)
-{
-	int r = 0;
-
-	pthread_mutex_lock(&_register_mutex);
-
-	if (!_lvm_handle) {
-		lvm2_log_fn(_lvm2_print_log);
-
-		if (!(_lvm_handle = lvm2_init()))
-			goto out;
-
-		/*
-		 * Need some space for allocations.  1024 should be more
-		 * than enough for what we need (device mapper name splitting)
-		 */
-		if (!_mem_pool && !(_mem_pool = dm_pool_create("mirror_dso", 1024))) {
-			lvm2_exit(_lvm_handle);
-			_lvm_handle = NULL;
-			goto out;
-		}
-
-		lvm2_disable_dmeventd_monitoring(_lvm_handle);
-		/* FIXME Temporary: move to dmeventd core */
-		lvm2_run(_lvm_handle, "_memlock_inc");
-		log_debug("lvm plugin initilized.");
-	}
-
-	_register_count++;
-	r = 1;
-
-out:
-	pthread_mutex_unlock(&_register_mutex);
-	return r;
-}
-
-void dmeventd_lvm2_exit(void)
-{
-	pthread_mutex_lock(&_register_mutex);
-
-	if (!--_register_count) {
-		log_debug("lvm plugin shuting down.");
-		lvm2_run(_lvm_handle, "_memlock_dec");
-		dm_pool_destroy(_mem_pool);
-		_mem_pool = NULL;
-		lvm2_exit(_lvm_handle);
-		_lvm_handle = NULL;
-		log_debug("lvm plugin exited.");
-	}
-
-	pthread_mutex_unlock(&_register_mutex);
-}
-
-struct dm_pool *dmeventd_lvm2_pool(void)
-{
-	return _mem_pool;
-}
-
-int dmeventd_lvm2_run(const char *cmdline)
-{
-	return (lvm2_run(_lvm_handle, cmdline) == LVM2_COMMAND_SUCCEEDED);
-}
-
-int dmeventd_lvm2_command(struct dm_pool *mem, char *buffer, size_t size,
-			  const char *cmd, const char *device)
-{
-	static char _internal_prefix[] =  "_dmeventd_";
-	char *vg = NULL, *lv = NULL, *layer;
-	int r;
-
-	if (!dm_split_lvm_name(mem, device, &vg, &lv, &layer)) {
-		log_error("Unable to determine VG name from %s.",
-			  device);
-		return 0;
-	}
-
-	/* strip off the mirror component designations */
-	if ((layer = strstr(lv, "_mimagetmp")) ||
-	    (layer = strstr(lv, "_mlog")))
-		*layer = '\0';
-
-	if (!strncmp(cmd, _internal_prefix, sizeof(_internal_prefix) - 1)) {
-		dmeventd_lvm2_lock();
-		/* output of internal command passed via env var */
-		if (!dmeventd_lvm2_run(cmd))
-			cmd = NULL;
-		else if ((cmd = getenv(cmd)))
-			cmd = dm_pool_strdup(mem, cmd); /* copy with lock */
-		dmeventd_lvm2_unlock();
-
-		if (!cmd) {
-			log_error("Unable to find configured command.");
-			return 0;
-		}
-	}
-
-	r = dm_snprintf(buffer, size, "%s %s/%s", cmd, vg, lv);
-
-	dm_pool_free(mem, vg);
-
-	if (r < 0) {
-		log_error("Unable to form LVM command. (too long).");
-		return 0;
-	}
-
-	return 1;
-}

daemons/dmeventd/plugins/lvm2/dmeventd_lvm.h

@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2010-2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*
- * Wrappers around liblvm2cmd functions for dmeventd plug-ins.
- *
- * liblvm2cmd is not thread-safe so the locking in this library helps dmeventd
- * threads to co-operate in sharing a single instance.
- *
- * FIXME Either support this properly as a generic liblvm2cmd wrapper or make
- * liblvm2cmd thread-safe so this can go away.
- */
-
-#ifndef _DMEVENTD_LVMWRAP_H
-#define _DMEVENTD_LVMWRAP_H
-
-struct dm_pool;
-
-int dmeventd_lvm2_init(void);
-void dmeventd_lvm2_exit(void);
-int dmeventd_lvm2_run(const char *cmdline);
-
-void dmeventd_lvm2_lock(void);
-void dmeventd_lvm2_unlock(void);
-
-struct dm_pool *dmeventd_lvm2_pool(void);
-
-int dmeventd_lvm2_command(struct dm_pool *mem, char *buffer, size_t size,
-			  const char *cmd, const char *device);
-
-#define dmeventd_lvm2_run_with_lock(cmdline) \
-	({\
-		int rc;\
-		dmeventd_lvm2_lock();\
-		rc = dmeventd_lvm2_run(cmdline);\
-		dmeventd_lvm2_unlock();\
-		rc;\
-	})
-
-#define dmeventd_lvm2_init_with_pool(name, st) \
-	({\
-		struct dm_pool *mem;\
-		st = NULL;\
-		if (dmeventd_lvm2_init()) {\
-			if ((mem = dm_pool_create(name, 2048)) &&\
-			    (st = dm_pool_zalloc(mem, sizeof(*st))))\
-				st->mem = mem;\
-			else {\
-				if (mem)\
-					dm_pool_destroy(mem);\
-				dmeventd_lvm2_exit();\
-			}\
-		}\
-		st;\
-	})
-
-#define dmeventd_lvm2_exit_with_pool(pool) \
-	do {\
-		dm_pool_destroy(pool->mem);\
-		dmeventd_lvm2_exit();\
-	} while(0)
-
-#endif /* _DMEVENTD_LVMWRAP_H */

daemons/dmeventd/plugins/mirror/.exported_symbols

@@ -1,3 +0,0 @@
-process_event
-register_device
-unregister_device

daemons/dmeventd/plugins/mirror/Makefile.in

@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
-# Copyright (C) 2004-2005, 2008-2014 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-INCLUDES += -I$(top_srcdir)/daemons/dmeventd/plugins/lvm2
-CLDFLAGS += -L$(top_builddir)/daemons/dmeventd/plugins/lvm2
-
-SOURCES = dmeventd_mirror.c
-
-LIB_NAME = libdevmapper-event-lvm2mirror
-LIB_SHARED = $(LIB_NAME).$(LIB_SUFFIX)
-LIB_VERSION = $(LIB_VERSION_LVM)
-
-CFLOW_LIST = $(SOURCES)
-CFLOW_LIST_TARGET = $(LIB_NAME).cflow
-
-include $(top_builddir)/make.tmpl
-
-LIBS += -ldevmapper-event-lvm2 -ldevmapper
-
-install_lvm2: install_dm_plugin
-
-install: install_lvm2

daemons/dmeventd/plugins/mirror/dmeventd_mirror.c

@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2005-2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "lib.h"
-#include "libdevmapper-event.h"
-#include "dmeventd_lvm.h"
-#include "activate.h"	/* For TARGET_NAME* */
-
-/* FIXME Reformat to 80 char lines. */
-
-#define ME_IGNORE    0
-#define ME_INSYNC    1
-#define ME_FAILURE   2
-
-struct dso_state {
-	struct dm_pool *mem;
-	char cmd_lvscan[512];
-	char cmd_lvconvert[512];
-};
-
-DM_EVENT_LOG_FN("mirr")
-
-static void _process_status_code(dm_status_mirror_health_t health,
-				 uint32_t major, uint32_t minor,
-				 const char *dev_type, int *r)
-{
-	/*
-	 *    A => Alive - No failures
-	 *    D => Dead - A write failure occurred leaving mirror out-of-sync
-	 *    F => Flush failed.
-	 *    S => Sync - A sychronization failure occurred, mirror out-of-sync
-	 *    R => Read - A read failure occurred, mirror data unaffected
-	 *    U => Unclassified failure (bug)
-	 */ 
-	switch (health) {
-	case DM_STATUS_MIRROR_ALIVE:
-		return;
-	case DM_STATUS_MIRROR_FLUSH_FAILED:
-		log_error("%s device %u:%u flush failed.",
-			  dev_type, major, minor);
-		*r = ME_FAILURE;
-		break;
-	case DM_STATUS_MIRROR_SYNC_FAILED:
-		log_error("%s device %u:%u sync failed.",
-			  dev_type, major, minor);
-		break;
-	case DM_STATUS_MIRROR_READ_FAILED:
-		log_error("%s device %u:%u read failed.",
-			  dev_type, major, minor);
-		break;
-	default:
-		log_error("%s device %u:%u has failed (%c).",
-			  dev_type, major, minor, (char)health);
-		*r = ME_FAILURE;
-		break;
-	}
-}
-
-static int _get_mirror_event(struct dso_state *state, char *params)
-{
-	int r = ME_INSYNC;
-	unsigned i;
-	struct dm_status_mirror *ms;
-
-	if (!dm_get_status_mirror(state->mem, params, &ms)) {
-		log_error("Unable to parse mirror status string.");
-		return ME_IGNORE;
-	}
-
-	/* Check for bad mirror devices */
-	for (i = 0; i < ms->dev_count; ++i)
-		_process_status_code(ms->devs[i].health,
-				     ms->devs[i].major, ms->devs[i].minor,
-				     i ? "Secondary mirror" : "Primary mirror", &r);
-
-	/* Check for bad disk log device */
-	for (i = 0; i < ms->log_count; ++i)
-		_process_status_code(ms->logs[i].health,
-				     ms->logs[i].major, ms->logs[i].minor,
-				     "Log", &r);
-
-	/* Ignore if not in-sync */
-	if ((r == ME_INSYNC) && (ms->insync_regions != ms->total_regions))
-		r = ME_IGNORE;
-
-	dm_pool_free(state->mem, ms);
-
-	return r;
-}
-
-static int _remove_failed_devices(const char *cmd_lvscan, const char *cmd_lvconvert,
-				  const char *device)
-{
-	if (!dmeventd_lvm2_run_with_lock(cmd_lvscan))
-		log_warn("WARNING: Re-scan of mirrored device %s failed.", device);
-
-	/* if repair goes OK, report success even if lvscan has failed */
-	if (!dmeventd_lvm2_run_with_lock(cmd_lvconvert)) {
-		log_error("Repair of mirrored device %s failed.", device);
-		return 0;
-	}
-
-	log_info("Repair of mirrored device %s finished successfully.", device);
-
-	return 1;
-}
-
-void process_event(struct dm_task *dmt,
-		   enum dm_event_mask event __attribute__((unused)),
-		   void **user)
-{
-	struct dso_state *state = *user;
-	void *next = NULL;
-	uint64_t start, length;
-	char *target_type = NULL;
-	char *params;
-	const char *device = dm_task_get_name(dmt);
-
-	do {
-		next = dm_get_next_target(dmt, next, &start, &length,
-					  &target_type, &params);
-
-		if (!target_type) {
-			log_info("%s mapping lost.", device);
-			continue;
-		}
-
-		if (strcmp(target_type, TARGET_NAME_MIRROR)) {
-			log_info("%s has unmirrored portion.", device);
-			continue;
-		}
-
-		switch(_get_mirror_event(state, params)) {
-		case ME_INSYNC:
-			/* FIXME: all we really know is that this
-			   _part_ of the device is in sync
-			   Also, this is not an error
-			*/
-			log_notice("%s is now in-sync.", device);
-			break;
-		case ME_FAILURE:
-			log_error("Device failure in %s.", device);
-			if (!_remove_failed_devices(state->cmd_lvscan,
-						    state->cmd_lvconvert,
-						    device))
-				/* FIXME Why are all the error return codes unused? Get rid of them? */
-				log_error("Failed to remove faulty devices in %s.",
-					  device);
-			/* Should check before warning user that device is now linear
-			else
-				log_notice("%s is now a linear device.",
-					   device);
-			*/
-			break;
-		case ME_IGNORE:
-			break;
-		default:
-			/* FIXME Provide value then! */
-			log_warn("WARNING: %s received unknown event.", device);
-		}
-	} while (next);
-}
-
-int register_device(const char *device,
-		    const char *uuid __attribute__((unused)),
-		    int major __attribute__((unused)),
-		    int minor __attribute__((unused)),
-		    void **user)
-{
-	struct dso_state *state;
-
-	if (!dmeventd_lvm2_init_with_pool("mirror_state", state))
-		goto_bad;
-
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvscan, sizeof(state->cmd_lvscan),
-				   "lvscan --cache", device)) {
-		dmeventd_lvm2_exit_with_pool(state);
-		goto_bad;
-	}
-
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvconvert, sizeof(state->cmd_lvconvert),
-				   "lvconvert --repair --use-policies", device)) {
-		dmeventd_lvm2_exit_with_pool(state);
-		goto_bad;
-	}
-
-	*user = state;
-
-	log_info("Monitoring mirror device %s for events.", device);
-
-	return 1;
-bad:
-	log_error("Failed to monitor mirror %s.", device);
-
-	return 0;
-}
-
-int unregister_device(const char *device,
-		      const char *uuid __attribute__((unused)),
-		      int major __attribute__((unused)),
-		      int minor __attribute__((unused)),
-		      void **user)
-{
-	struct dso_state *state = *user;
-
-	dmeventd_lvm2_exit_with_pool(state);
-	log_info("No longer monitoring mirror device %s for events.",
-		 device);
-
-	return 1;
-}

daemons/dmeventd/plugins/raid/.exported_symbols

@@ -1,3 +0,0 @@
-process_event
-register_device
-unregister_device

daemons/dmeventd/plugins/raid/Makefile.in

@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2011-2014 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-INCLUDES += -I$(top_srcdir)/daemons/dmeventd/plugins/lvm2
-CLDFLAGS += -L$(top_builddir)/daemons/dmeventd/plugins/lvm2
-
-SOURCES = dmeventd_raid.c
-
-LIB_NAME = libdevmapper-event-lvm2raid
-LIB_SHARED = $(LIB_NAME).$(LIB_SUFFIX)
-LIB_VERSION = $(LIB_VERSION_LVM)
-
-CFLOW_LIST = $(SOURCES)
-CFLOW_LIST_TARGET = $(LIB_NAME).cflow
-
-include $(top_builddir)/make.tmpl
-
-LIBS += -ldevmapper-event-lvm2 -ldevmapper
-
-install_lvm2: install_dm_plugin
-
-install: install_lvm2

daemons/dmeventd/plugins/raid/dmeventd_raid.c

@@ -1,172 +0,0 @@
-/*
- * Copyright (C) 2005-2016 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "lib.h"
-#include "defaults.h"
-#include "dmeventd_lvm.h"
-#include "libdevmapper-event.h"
-
-/* Hold enough elements for the mximum number of RAID images */
-#define	RAID_DEVS_ELEMS	((DEFAULT_RAID_MAX_IMAGES + 63) / 64)
-
-struct dso_state {
-	struct dm_pool *mem;
-	char cmd_lvscan[512];
-	char cmd_lvconvert[512];
-	uint64_t raid_devs[RAID_DEVS_ELEMS];
-	int failed;
-	int warned;
-};
-
-DM_EVENT_LOG_FN("raid")
-
-/* FIXME Reformat to 80 char lines. */
-
-static int _process_raid_event(struct dso_state *state, char *params, const char *device)
-{
-	struct dm_status_raid *status;
-	const char *d;
-	int dead = 0, r = 1;
-	uint32_t dev;
-
-	if (!dm_get_status_raid(state->mem, params, &status)) {
-		log_error("Failed to process status line for %s.", device);
-		return 0;
-	}
-
-	d = status->dev_health;
-	while ((d = strchr(d, 'D'))) {
-		dev = (uint32_t)(d - status->dev_health);
-
-		if (!(state->raid_devs[dev / 64] & (UINT64_C(1) << (dev % 64)))) {
-			state->raid_devs[dev / 64] |= (UINT64_C(1) << (dev % 64));
-			log_warn("WARNING: Device #%u of %s array, %s, has failed.",
-				 dev, status->raid_type, device);
-		}
-
-		d++;
-		dead = 1;
-	}
-
-	if (dead) {
-		if (status->insync_regions < status->total_regions) {
-			if (!state->warned) {
-				state->warned = 1;
-				log_warn("WARNING: waiting for resynchronization to finish "
-					 "before initiating repair on RAID device %s.", device);
-			}
-
-			goto out; /* Not yet done syncing with accessible devices */
-		}
-
-		if (state->failed)
-			goto out; /* already reported */
-
-		state->failed = 1;
-		if (!dmeventd_lvm2_run_with_lock(state->cmd_lvscan))
-			log_warn("WARNING: Re-scan of RAID device %s failed.", device);
-
-		/* if repair goes OK, report success even if lvscan has failed */
-		if (!dmeventd_lvm2_run_with_lock(state->cmd_lvconvert)) {
-			log_error("Repair of RAID device %s failed.", device);
-			r = 0;
-		}
-	} else {
-		state->failed = 0;
-		log_info("%s array, %s, is %s in-sync.",
-			 status->raid_type, device,
-			 (status->insync_regions == status->total_regions) ? "now" : "not");
-	}
-out:
-	dm_pool_free(state->mem, status);
-
-	return r;
-}
-
-void process_event(struct dm_task *dmt,
-		   enum dm_event_mask event __attribute__((unused)),
-		   void **user)
-{
-	struct dso_state *state = *user;
-	void *next = NULL;
-	uint64_t start, length;
-	char *target_type = NULL;
-	char *params;
-	const char *device = dm_task_get_name(dmt);
-
-	do {
-		next = dm_get_next_target(dmt, next, &start, &length,
-					  &target_type, &params);
-
-		if (!target_type) {
-			log_info("%s mapping lost.", device);
-			continue;
-		}
-
-		if (strcmp(target_type, "raid")) {
-			log_info("%s has non-raid portion.", device);
-			continue;
-		}
-
-		if (!_process_raid_event(state, params, device))
-			log_error("Failed to process event for %s.",
-				  device);
-	} while (next);
-}
-
-int register_device(const char *device,
-		    const char *uuid __attribute__((unused)),
-		    int major __attribute__((unused)),
-		    int minor __attribute__((unused)),
-		    void **user)
-{
-	struct dso_state *state;
-
-	if (!dmeventd_lvm2_init_with_pool("raid_state", state))
-		goto_bad;
-
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvscan, sizeof(state->cmd_lvscan),
-				   "lvscan --cache", device) ||
-	    !dmeventd_lvm2_command(state->mem, state->cmd_lvconvert, sizeof(state->cmd_lvconvert),
-				   "lvconvert --config devices{ignore_suspended_devices=1} "
-				   "--repair --use-policies", device)) {
-		dmeventd_lvm2_exit_with_pool(state);
-		goto_bad;
-	}
-
-	*user = state;
-
-	log_info("Monitoring RAID device %s for events.", device);
-
-	return 1;
-bad:
-	log_error("Failed to monitor RAID %s.", device);
-
-	return 0;
-}
-
-int unregister_device(const char *device,
-		      const char *uuid __attribute__((unused)),
-		      int major __attribute__((unused)),
-		      int minor __attribute__((unused)),
-		      void **user)
-{
-	struct dso_state *state = *user;
-
-	dmeventd_lvm2_exit_with_pool(state);
-	log_info("No longer monitoring RAID device %s for events.",
-		 device);
-
-	return 1;
-}

daemons/dmeventd/plugins/snapshot/.exported_symbols

@@ -1,3 +0,0 @@
-process_event
-register_device
-unregister_device

daemons/dmeventd/plugins/snapshot/Makefile.in

@@ -1,33 +0,0 @@
-#
-# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
-# Copyright (C) 2004-2014 Red Hat, Inc. All rights reserved.
-#
-# This file is part of the LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-INCLUDES += -I$(top_srcdir)/daemons/dmeventd/plugins/lvm2
-CLDFLAGS += -L$(top_builddir)/daemons/dmeventd/plugins/lvm2
-
-SOURCES = dmeventd_snapshot.c
-
-LIB_SHARED = libdevmapper-event-lvm2snapshot.$(LIB_SUFFIX)
-LIB_VERSION = $(LIB_VERSION_LVM)
-
-include $(top_builddir)/make.tmpl
-
-LIBS += -ldevmapper-event-lvm2 -ldevmapper
-
-install_lvm2: install_dm_plugin
-
-install: install_lvm2

daemons/dmeventd/plugins/snapshot/dmeventd_snapshot.c

@@ -1,286 +0,0 @@
-/*
- * Copyright (C) 2007-2015 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "lib.h"
-#include "dmeventd_lvm.h"
-#include "libdevmapper-event.h"
-
-#include <sys/sysmacros.h>
-#include <sys/wait.h>
-#include <stdarg.h>
-#include <pthread.h>
-
-/* First warning when snapshot is 80% full. */
-#define WARNING_THRESH	(DM_PERCENT_1 * 80)
-/* Run a check every 5%. */
-#define CHECK_STEP	(DM_PERCENT_1 *  5)
-/* Do not bother checking snapshots less than 50% full. */
-#define CHECK_MINIMUM	(DM_PERCENT_1 * 50)
-
-#define UMOUNT_COMMAND "/bin/umount"
-
-struct dso_state {
-	struct dm_pool *mem;
-	dm_percent_t percent_check;
-	uint64_t known_size;
-	char cmd_lvextend[512];
-};
-
-DM_EVENT_LOG_FN("snap")
-
-static int _run(const char *cmd, ...)
-{
-        va_list ap;
-        int argc = 1; /* for argv[0], i.e. cmd */
-        int i = 0;
-        const char **argv;
-        pid_t pid = fork();
-        int status;
-
-        if (pid == 0) { /* child */
-                va_start(ap, cmd);
-                while (va_arg(ap, const char *))
-                        ++ argc;
-                va_end(ap);
-
-                /* + 1 for the terminating NULL */
-                argv = alloca(sizeof(const char *) * (argc + 1));
-
-                argv[0] = cmd;
-                va_start(ap, cmd);
-                while ((argv[++i] = va_arg(ap, const char *)));
-                va_end(ap);
-
-                execvp(cmd, (char **)argv);
-                log_sys_error("exec", cmd);
-                exit(127);
-        }
-
-        if (pid > 0) { /* parent */
-                if (waitpid(pid, &status, 0) != pid)
-                        return 0; /* waitpid failed */
-                if (!WIFEXITED(status) || WEXITSTATUS(status))
-                        return 0; /* the child failed */
-        }
-
-        if (pid < 0)
-                return 0; /* fork failed */
-
-        return 1; /* all good */
-}
-
-static int _extend(const char *cmd)
-{
-	log_debug("Extending snapshot via %s.", cmd);
-	return dmeventd_lvm2_run_with_lock(cmd);
-}
-
-#ifdef SNAPSHOT_REMOVE
-/* Remove invalid snapshot from dm-table */
-/* Experimental for now and not used by default */
-static int _remove(const char *uuid)
-{
-	int r = 1;
-	uint32_t cookie = 0;
-	struct dm_task *dmt;
-
-	if (!(dmt = dm_task_create(DM_DEVICE_REMOVE)))
-		return 0;
-
-	if (!dm_task_set_uuid(dmt, uuid)) {
-		r = 0;
-		goto_out;
-	}
-
-	dm_task_retry_remove(dmt);
-
-	if (!dm_task_set_cookie(dmt, &cookie, 0)) {
-		r = 0;
-		goto_out;
-	}
-
-	if (!dm_task_run(dmt)) {
-		r = 0;
-		goto_out;
-	}
-out:
-	dm_task_destroy(dmt);
-
-	return r;
-}
-#endif /* SNAPSHOT_REMOVE */
-
-static void _umount(const char *device, int major, int minor)
-{
-	FILE *mounts;
-	char buffer[4096];
-	char *words[3];
-	struct stat st;
-	const char procmounts[] = "/proc/mounts";
-
-	if (!(mounts = fopen(procmounts, "r"))) {
-		log_sys_error("fopen", procmounts);
-		log_error("Not umounting %s.", device);
-		return;
-	}
-
-	while (!feof(mounts)) {
-		/* read a line of /proc/mounts */
-		if (!fgets(buffer, sizeof(buffer), mounts))
-			break; /* eof, likely */
-
-		/* words[0] is the mount point and words[1] is the device path */
-		if (dm_split_words(buffer, 3, 0, words) < 2)
-			continue;
-
-		/* find the major/minor of the device */
-		if (stat(words[0], &st))
-			continue; /* can't stat, skip this one */
-
-		if (S_ISBLK(st.st_mode) &&
-		    (int) major(st.st_rdev) == major &&
-		    (int) minor(st.st_rdev) == minor) {
-			log_error("Unmounting invalid snapshot %s from %s.", device, words[1]);
-			if (!_run(UMOUNT_COMMAND, "-fl", words[1], NULL))
-				log_error("Failed to umount snapshot %s from %s: %s.",
-					  device, words[1], strerror(errno));
-		}
-	}
-
-	if (fclose(mounts))
-		log_sys_error("close", procmounts);
-}
-
-void process_event(struct dm_task *dmt,
-		   enum dm_event_mask event __attribute__((unused)),
-		   void **user)
-{
-	struct dso_state *state = *user;
-	void *next = NULL;
-	uint64_t start, length;
-	char *target_type = NULL;
-	char *params;
-	struct dm_status_snapshot *status = NULL;
-	const char *device = dm_task_get_name(dmt);
-	int percent;
-	struct dm_info info;
-
-	/* No longer monitoring, waiting for remove */
-	if (!state->percent_check)
-		return;
-
-	dm_get_next_target(dmt, next, &start, &length, &target_type, &params);
-	if (!target_type || strcmp(target_type, "snapshot")) {
-		log_error("Target %s is not snapshot.", target_type);
-		return;
-	}
-
-	if (!dm_get_status_snapshot(state->mem, params, &status)) {
-		log_error("Cannot parse snapshot %s state: %s.", device, params);
-		return;
-	}
-
-	/*
-	 * If the snapshot has been invalidated or we failed to parse
-	 * the status string. Report the full status string to syslog.
-	 */
-	if (status->invalid || status->overflow || !status->total_sectors) {
-		log_warn("WARNING: Snapshot %s changed state to: %s and should be removed.",
-			 device, params);
-		state->percent_check = 0;
-		if (dm_task_get_info(dmt, &info))
-			_umount(device, info.major, info.minor);
-#ifdef SNAPSHOT_REMOVE
-		/* Maybe configurable ? */
-		_remove(dm_task_get_uuid(dmt));
-#endif
-		pthread_kill(pthread_self(), SIGALRM);
-		goto out;
-	}
-
-	if (length <= (status->used_sectors - status->metadata_sectors)) {
-		/* TODO eventually recognize earlier when room is enough */
-		log_info("Dropping monitoring of fully provisioned snapshot %s.",
-			 device);
-		pthread_kill(pthread_self(), SIGALRM);
-		goto out;
-	}
-
-	/* Snapshot size had changed. Clear the threshold. */
-	if (state->known_size != status->total_sectors) {
-		state->percent_check = CHECK_MINIMUM;
-		state->known_size = status->total_sectors;
-	}
-
-	percent = dm_make_percent(status->used_sectors, status->total_sectors);
-	if (percent >= state->percent_check) {
-		/* Usage has raised more than CHECK_STEP since the last
-		   time. Run actions. */
-		state->percent_check = (percent / CHECK_STEP) * CHECK_STEP + CHECK_STEP;
-
-		if (percent >= WARNING_THRESH) /* Print a warning to syslog. */
-			log_warn("WARNING: Snapshot %s is now %.2f%% full.",
-				 device, dm_percent_to_float(percent));
-
-		/* Try to extend the snapshot, in accord with user-set policies */
-		if (!_extend(state->cmd_lvextend))
-			log_error("Failed to extend snapshot %s.", device);
-	}
-out:
-	dm_pool_free(state->mem, status);
-}
-
-int register_device(const char *device,
-		    const char *uuid __attribute__((unused)),
-		    int major __attribute__((unused)),
-		    int minor __attribute__((unused)),
-		    void **user)
-{
-	struct dso_state *state;
-
-	if (!dmeventd_lvm2_init_with_pool("snapshot_state", state))
-		goto_bad;
-
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvextend,
-				   sizeof(state->cmd_lvextend),
-				   "lvextend --use-policies", device)) {
-		dmeventd_lvm2_exit_with_pool(state);
-		goto_bad;
-	}
-
-	state->percent_check = CHECK_MINIMUM;
-	*user = state;
-
-	log_info("Monitoring snapshot %s.", device);
-
-	return 1;
-bad:
-	log_error("Failed to monitor snapshot %s.", device);
-
-	return 0;
-}
-
-int unregister_device(const char *device,
-		      const char *uuid __attribute__((unused)),
-		      int major __attribute__((unused)),
-		      int minor __attribute__((unused)),
-		      void **user)
-{
-	struct dso_state *state = *user;
-
-	dmeventd_lvm2_exit_with_pool(state);
-	log_info("No longer monitoring snapshot %s.", device);
-
-	return 1;
-}

daemons/dmeventd/plugins/thin/.exported_symbols

@@ -1,3 +0,0 @@
-process_event
-register_device
-unregister_device

daemons/dmeventd/plugins/thin/Makefile.in

@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2011-2014 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-INCLUDES += -I$(top_srcdir)/daemons/dmeventd/plugins/lvm2
-CLDFLAGS += -L$(top_builddir)/daemons/dmeventd/plugins/lvm2
-
-SOURCES = dmeventd_thin.c
-
-LIB_NAME = libdevmapper-event-lvm2thin
-LIB_SHARED = $(LIB_NAME).$(LIB_SUFFIX)
-LIB_VERSION = $(LIB_VERSION_LVM)
-
-CFLOW_LIST = $(SOURCES)
-CFLOW_LIST_TARGET = $(LIB_NAME).cflow
-
-include $(top_builddir)/make.tmpl
-
-LIBS += -ldevmapper-event-lvm2 -ldevmapper
-
-install_lvm2: install_dm_plugin
-
-install: install_lvm2

daemons/dmeventd/plugins/thin/dmeventd_thin.c

@@ -1,431 +0,0 @@
-/*
- * Copyright (C) 2011-2017 Red Hat, Inc. All rights reserved.
- *
- * This file is part of LVM2.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU Lesser General Public License v.2.1.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "lib.h"	/* using here lvm log */
-#include "dmeventd_lvm.h"
-#include "libdevmapper-event.h"
-
-#include <sys/wait.h>
-#include <stdarg.h>
-#include <pthread.h>
-
-/* TODO - move this mountinfo code into library to be reusable */
-#ifdef __linux__
-#  include "kdev_t.h"
-#else
-#  define MAJOR(x) major((x))
-#  define MINOR(x) minor((x))
-#endif
-
-/* First warning when thin data or metadata is 80% full. */
-#define WARNING_THRESH	(DM_PERCENT_1 * 80)
-/* Umount thin LVs when thin data or metadata LV is >=
- * and lvextend --use-policies has failed. */
-#define UMOUNT_THRESH	(DM_PERCENT_1 * 95)
-/* Run a check every 5%. */
-#define CHECK_STEP	(DM_PERCENT_1 *  5)
-/* Do not bother checking thin data or metadata is less than 50% full. */
-#define CHECK_MINIMUM	(DM_PERCENT_1 * 50)
-
-#define UMOUNT_COMMAND "/bin/umount"
-
-#define MAX_FAILS	(256)  /* ~42 mins between cmd call retry with 10s delay */
-
-#define THIN_DEBUG 0
-
-struct dso_state {
-	struct dm_pool *mem;
-	int metadata_percent_check;
-	int metadata_percent;
-	int metadata_warn_once;
-	int data_percent_check;
-	int data_percent;
-	int data_warn_once;
-	uint64_t known_metadata_size;
-	uint64_t known_data_size;
-	unsigned fails;
-	unsigned max_fails;
-	int restore_sigset;
-	sigset_t old_sigset;
-	pid_t pid;
-	char **argv;
-	char cmd_str[1024];
-};
-
-DM_EVENT_LOG_FN("thin")
-
-#define UUID_PREFIX "LVM-"
-
-static int _run_command(struct dso_state *state)
-{
-	char val[3][36];
-	char *env[] = { val[0], val[1], val[2], NULL };
-	int i;
-
-	/* Mark for possible lvm2 command we are running from dmeventd
-	 * lvm2 will not try to talk back to dmeventd while processing it */
-	(void) dm_snprintf(val[0], sizeof(val[0]), "LVM_RUN_BY_DMEVENTD=1");
-
-	if (state->data_percent) {
-		/* Prepare some known data to env vars for easy use */
-		(void) dm_snprintf(val[1], sizeof(val[1]), "DMEVENTD_THIN_POOL_DATA=%d",
-				   state->data_percent / DM_PERCENT_1);
-		(void) dm_snprintf(val[2], sizeof(val[2]), "DMEVENTD_THIN_POOL_METADATA=%d",
-				   state->metadata_percent / DM_PERCENT_1);
-	} else {
-		/* For an error event it's for a user to check status and decide */
-		env[1] = NULL;
-		log_debug("Error event processing");
-	}
-
-	log_verbose("Executing command: %s", state->cmd_str);
-
-	/* TODO:
-	 *   Support parallel run of 'task' and it's waitpid maintainence
-	 *   ATM we can't handle signaling of  SIGALRM
-	 *   as signalling is not allowed while 'process_event()' is running
-	 */
-	if (!(state->pid = fork())) {
-		/* child */
-		(void) close(0);
-		for (i = 3; i < 255; ++i) (void) close(i);
-		execve(state->argv[0], state->argv, env);
-		_exit(errno);
-	} else if (state->pid == -1) {
-		log_error("Can't fork command %s.", state->cmd_str);
-		state->fails = 1;
-		return 0;
-	}
-
-	return 1;
-}
-
-static int _use_policy(struct dm_task *dmt, struct dso_state *state)
-{
-#if THIN_DEBUG
-	log_debug("dmeventd executes: %s.", state->cmd_str);
-#endif
-	if (state->argv)
-		return _run_command(state);
-
-	if (!dmeventd_lvm2_run_with_lock(state->cmd_str)) {
-		log_error("Failed command for %s.", dm_task_get_name(dmt));
-		state->fails = 1;
-		return 0;
-	}
-
-	state->fails = 0;
-
-	return 1;
-}
-
-/* Check if executed command has finished
- * Only 1 command may run */
-static int _wait_for_pid(struct dso_state *state)
-{
-	int status = 0;
-
-	if (state->pid == -1)
-		return 1;
-
-	if (!waitpid(state->pid, &status, WNOHANG))
-		return 0;
-
-	/* Wait for finish */
-	if (WIFEXITED(status)) {
-		log_verbose("Child %d exited with status %d.",
-			    state->pid, WEXITSTATUS(status));
-		state->fails = WEXITSTATUS(status) ? 1 : 0;
-	} else {
-		if (WIFSIGNALED(status))
-			log_verbose("Child %d was terminated with status %d.",
-				    state->pid, WTERMSIG(status));
-		state->fails = 1;
-	}
-
-	state->pid = -1;
-
-	return 1;
-}
-
-void process_event(struct dm_task *dmt,
-		   enum dm_event_mask event __attribute__((unused)),
-		   void **user)
-{
-	const char *device = dm_task_get_name(dmt);
-	struct dso_state *state = *user;
-	struct dm_status_thin_pool *tps = NULL;
-	void *next = NULL;
-	uint64_t start, length;
-	char *target_type = NULL;
-	char *params;
-	int needs_policy = 0;
-	struct dm_task *new_dmt = NULL;
-
-#if THIN_DEBUG
-	log_debug("Watch for tp-data:%.2f%%  tp-metadata:%.2f%%.",
-		  dm_percent_to_float(state->data_percent_check),
-		  dm_percent_to_float(state->metadata_percent_check));
-#endif
-	if (!_wait_for_pid(state)) {
-		log_warn("WARNING: Skipping event, child %d is still running (%s).",
-			 state->pid, state->cmd_str);
-		return;
-	}
-
-	if (event & DM_EVENT_DEVICE_ERROR) {
-		/* Error -> no need to check and do instant resize */
-		state->data_percent = state->metadata_percent = 0;
-		if (_use_policy(dmt, state))
-			goto out;
-
-		stack;
-
-		/*
-		 * Rather update oldish status
-		 * since after 'command' processing
-		 * percentage info could have changed a lot.
-		 * If we would get above UMOUNT_THRESH
-		 * we would wait for next sigalarm.
-		 */
-		if (!(new_dmt = dm_task_create(DM_DEVICE_STATUS)))
-			goto_out;
-
-		if (!dm_task_set_uuid(new_dmt, dm_task_get_uuid(dmt)))
-			goto_out;
-
-		/* Non-blocking status read */
-		if (!dm_task_no_flush(new_dmt))
-			log_warn("WARNING: Can't set no_flush for dm status.");
-
-		if (!dm_task_run(new_dmt))
-			goto_out;
-
-		dmt = new_dmt;
-	}
-
-	dm_get_next_target(dmt, next, &start, &length, &target_type, &params);
-
-	if (!target_type || (strcmp(target_type, "thin-pool") != 0)) {
-		log_error("Invalid target type.");
-		goto out;
-	}
-
-	if (!dm_get_status_thin_pool(state->mem, params, &tps)) {
-		log_error("Failed to parse status.");
-		goto out;
-	}
-
-#if THIN_DEBUG
-	log_debug("Thin pool status " FMTu64 "/" FMTu64 "  "
-		  FMTu64 "/" FMTu64 ".",
-		  tps->used_metadata_blocks, tps->total_metadata_blocks,
-		  tps->used_data_blocks, tps->total_data_blocks);
-#endif
-
-	/* Thin pool size had changed. Clear the threshold. */
-	if (state->known_metadata_size != tps->total_metadata_blocks) {
-		state->metadata_percent_check = CHECK_MINIMUM;
-		state->known_metadata_size = tps->total_metadata_blocks;
-		state->fails = 0;
-	}
-
-	if (state->known_data_size != tps->total_data_blocks) {
-		state->data_percent_check = CHECK_MINIMUM;
-		state->known_data_size = tps->total_data_blocks;
-		state->fails = 0;
-	}
-
-	/*
-	 * Trigger action when threshold boundary is exceeded.
-	 * Report 80% threshold warning when it's used above 80%.
-	 * Only 100% is exception as it cannot be surpased so policy
-	 * action is called for:  >50%, >55% ... >95%, 100%
-	 */
-	state->metadata_percent = dm_make_percent(tps->used_metadata_blocks, tps->total_metadata_blocks);
-	if (state->metadata_percent <= WARNING_THRESH)
-		state->metadata_warn_once = 0; /* Dropped bellow threshold, reset warn once */
-	else if (!state->metadata_warn_once++) /* Warn once when raised above threshold */
-		log_warn("WARNING: Thin pool %s metadata is now %.2f%% full.",
-			 device, dm_percent_to_float(state->metadata_percent));
-	if (state->metadata_percent > CHECK_MINIMUM) {
-		/* Run action when usage raised more than CHECK_STEP since the last time */
-		if (state->metadata_percent > state->metadata_percent_check)
-			needs_policy = 1;
-		state->metadata_percent_check = (state->metadata_percent / CHECK_STEP + 1) * CHECK_STEP;
-		if (state->metadata_percent_check == DM_PERCENT_100)
-			state->metadata_percent_check--; /* Can't get bigger then 100% */
-	} else
-		state->metadata_percent_check = CHECK_MINIMUM;
-
-	state->data_percent = dm_make_percent(tps->used_data_blocks, tps->total_data_blocks);
-	if (state->data_percent <= WARNING_THRESH)
-		state->data_warn_once = 0;
-	else if (!state->data_warn_once++)
-		log_warn("WARNING: Thin pool %s data is now %.2f%% full.",
-			 device, dm_percent_to_float(state->data_percent));
-	if (state->data_percent > CHECK_MINIMUM) {
-		/* Run action when usage raised more than CHECK_STEP since the last time */
-		if (state->data_percent > state->data_percent_check)
-			needs_policy = 1;
-		state->data_percent_check = (state->data_percent / CHECK_STEP + 1) * CHECK_STEP;
-		if (state->data_percent_check == DM_PERCENT_100)
-			state->data_percent_check--; /* Can't get bigger then 100% */
-	} else
-		state->data_percent_check = CHECK_MINIMUM;
-
-	/* Reduce number of _use_policy() calls by power-of-2 factor till frequency of MAX_FAILS is reached.
-	 * Avoids too high number of error retries, yet shows some status messages in log regularly.
-	 * i.e. PV could have been pvmoved and VG/LV was locked for a while...
-	 */
-	if (state->fails) {
-		if (state->fails++ <= state->max_fails) {
-			log_debug("Postponing frequently failing policy (%u <= %u).",
-				  state->fails - 1, state->max_fails);
-			return;
-		}
-		if (state->max_fails < MAX_FAILS)
-			state->max_fails <<= 1;
-		state->fails = needs_policy = 1; /* Retry failing command */
-	} else
-		state->max_fails = 1; /* Reset on success */
-
-	if (needs_policy)
-		_use_policy(dmt, state);
-out:
-	if (tps)
-		dm_pool_free(state->mem, tps);
-
-	if (new_dmt)
-		dm_task_destroy(new_dmt);
-}
-
-/* Handle SIGCHLD for a thread */
-static void _sig_child(int signum __attribute__((unused)))
-{
-	/* empty SIG_IGN */;
-}
-
-/* Setup handler for SIGCHLD when executing external command
- * to get quick 'waitpid()' reaction
- * It will interrupt syscall just like SIGALRM and
- * invoke process_event().
- */
-static void _init_thread_signals(struct dso_state *state)
-{
-	struct sigaction act = { .sa_handler = _sig_child };
-	sigset_t my_sigset;
-
-	sigemptyset(&my_sigset);
-
-	if (sigaction(SIGCHLD, &act, NULL))
-		log_warn("WARNING: Failed to set SIGCHLD action.");
-	else if (sigaddset(&my_sigset, SIGCHLD))
-		log_warn("WARNING: Failed to add SIGCHLD to set.");
-	else if (pthread_sigmask(SIG_UNBLOCK, &my_sigset, &state->old_sigset))
-		log_warn("WARNING: Failed to unblock SIGCHLD.");
-	else
-		state->restore_sigset = 1;
-}
-
-static void _restore_thread_signals(struct dso_state *state)
-{
-	if (state->restore_sigset &&
-	    pthread_sigmask(SIG_SETMASK, &state->old_sigset, NULL))
-		log_warn("WARNING: Failed to block SIGCHLD.");
-}
-
-int register_device(const char *device,
-		    const char *uuid __attribute__((unused)),
-		    int major __attribute__((unused)),
-		    int minor __attribute__((unused)),
-		    void **user)
-{
-	struct dso_state *state;
-	int maxcmd;
-	char *str;
-
-	if (!dmeventd_lvm2_init_with_pool("thin_pool_state", state))
-		goto_bad;
-
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_str,
-				   sizeof(state->cmd_str),
-				   "_dmeventd_thin_command", device)) {
-		dmeventd_lvm2_exit_with_pool(state);
-		goto_bad;
-	}
-
-	if (strncmp(state->cmd_str, "lvm ", 4)) {
-		maxcmd = 2; /* space for last NULL element */
-		for (str = state->cmd_str; *str; str++)
-			if (*str == ' ')
-				maxcmd++;
-		if (!(str = dm_pool_strdup(state->mem, state->cmd_str)) ||
-		    !(state->argv = dm_pool_zalloc(state->mem, maxcmd * sizeof(char *)))) {
-			log_error("Failed to allocate memory for command.");
-			goto bad;
-		}
-
-		dm_split_words(str, maxcmd - 1, 0, state->argv);
-		_init_thread_signals(state);
-	} else
-		memmove(state->cmd_str, state->cmd_str + 4, strlen(state->cmd_str + 4) + 1);
-
-	state->pid = -1;
-	*user = state;
-
-	log_info("Monitoring thin pool %s.", device);
-
-	return 1;
-bad:
-	log_error("Failed to monitor thin pool %s.", device);
-
-	return 0;
-}
-
-int unregister_device(const char *device,
-		      const char *uuid __attribute__((unused)),
-		      int major __attribute__((unused)),
-		      int minor __attribute__((unused)),
-		      void **user)
-{
-	struct dso_state *state = *user;
-	int i;
-
-	for (i = 0; !_wait_for_pid(state) && (i < 6); ++i) {
-		if (i == 0)
-			/* Give it 2 seconds, then try to terminate & kill it */
-			log_verbose("Child %d still not finished (%s) waiting.",
-				    state->pid, state->cmd_str);
-		else if (i == 3) {
-			log_warn("WARNING: Terminating child %d.", state->pid);
-			kill(state->pid, SIGINT);
-			kill(state->pid, SIGTERM);
-		} else if (i == 5) {
-			log_warn("WARNING: Killing child %d.", state->pid);
-			kill(state->pid, SIGKILL);
-		}
-		sleep(1);
-	}
-
-	if (state->pid != -1)
-		log_warn("WARNING: Cannot kill child %d!", state->pid);
-
-	_restore_thread_signals(state);
-
-	dmeventd_lvm2_exit_with_pool(state);
-	log_info("No longer monitoring thin pool %s.", device);
-
-	return 1;
-}

daemons/lvmdbusd/.gitignore

@@ -1 +0,0 @@
-path.py

daemons/lvmdbusd/Makefile.in

@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2016 Red Hat, Inc. All rights reserved.
-#
-# This file is part of LVM2.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-lvmdbusdir = $(python3dir)/lvmdbusd
-
-LVMDBUS_SRCDIR_FILES = \
-	automatedproperties.py \
-	background.py \
-	cfg.py \
-	cmdhandler.py \
-	fetch.py \
-	__init__.py \
-	job.py \
-	loader.py \
-	lvmdb.py \
-	main.py \
-	lvm_shell_proxy.py \
-	lv.py \
-	manager.py \
-	objectmanager.py \
-	pv.py \
-	request.py \
-	state.py \
-	udevwatch.py \
-	utils.py \
-	vg.py
-
-LVMDBUS_BUILDDIR_FILES = \
-	path.py
-
-LVMDBUSD = $(srcdir)/lvmdbusd
-
-include $(top_builddir)/make.tmpl
-
-.PHONY: install_lvmdbusd
-
-install_lvmdbusd:
-	$(INSTALL_DIR) $(sbindir)
-	$(INSTALL_SCRIPT) $(LVMDBUSD) $(sbindir)
-	$(INSTALL_DIR) $(DESTDIR)$(lvmdbusdir)
-	(cd $(srcdir); $(INSTALL_DATA) $(LVMDBUS_SRCDIR_FILES) $(DESTDIR)$(lvmdbusdir))
-	$(INSTALL_DATA) $(LVMDBUS_BUILDDIR_FILES) $(DESTDIR)$(lvmdbusdir)
-	PYTHON=$(PYTHON3) $(PYCOMPILE) --destdir "$(DESTDIR)" --basedir "$(lvmdbusdir)" $(LVMDBUS_SRCDIR_FILES) $(LVMDBUS_BUILDDIR_FILES)
-	$(CHMOD) 755 $(DESTDIR)$(lvmdbusdir)/__pycache__
-	$(CHMOD) 444 $(DESTDIR)$(lvmdbusdir)/__pycache__/*.py[co]
-
-install_lvm2: install_lvmdbusd
-
-install: install_lvm2
-
-DISTCLEAN_TARGETS+= \
-	$(LVMDBUS_BUILDDIR_FILES)

daemons/lvmdbusd/__init__.py

@@ -1,10 +0,0 @@
-# Copyright (C) 2015-2016 Red Hat, Inc. All rights reserved.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-from .main import main

daemons/lvmdbusd/automatedproperties.py

@@ -1,173 +0,0 @@
-# Copyright (C) 2015-2016 Red Hat, Inc. All rights reserved.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-import dbus
-import dbus.service
-from . import cfg
-from .utils import get_properties, add_properties, get_object_property_diff, \
-	log_debug
-from .state import State
-
-
-# noinspection PyPep8Naming,PyUnresolvedReferences
-class AutomatedProperties(dbus.service.Object):
-	"""
-	This class implements the needed interfaces for:
-	org.freedesktop.DBus.Properties
-
-	Other classes inherit from it to get the same behavior
-	"""
-
-	def __init__(self, object_path, search_method=None):
-		dbus.service.Object.__init__(self, cfg.bus, object_path)
-		self._ap_interface = []
-		self._ap_o_path = object_path
-		self._ap_search_method = search_method
-		self.state = None
-
-	def dbus_object_path(self):
-		return self._ap_o_path
-
-	def emit_data(self):
-		props = {}
-
-		for i in self.interface():
-			props[i] = self.GetAll(i)
-
-		return self._ap_o_path, props
-
-	def set_interface(self, interface):
-		"""
-		With inheritance we can't easily tell what interfaces a class provides
-		so we will have each class that implements an interface tell the
-		base AutomatedProperties what it is they do provide.  This is kind of
-		clunky and perhaps we can figure out a better way to do this later.
-		:param interface:       An interface the object supports
-		:return:
-		"""
-		if interface not in self._ap_interface:
-			self._ap_interface.append(interface)
-
-	# noinspection PyUnusedLocal
-	def interface(self, all_interfaces=False):
-		if all_interfaces:
-			cpy = list(self._ap_interface)
-			cpy.extend(
-				["org.freedesktop.DBus.Introspectable",
-					"org.freedesktop.DBus.Properties"])
-			return cpy
-
-		return self._ap_interface
-
-	# Properties
-	# noinspection PyUnusedLocal
-	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
-							in_signature='ss', out_signature='v')
-	def Get(self, interface_name, property_name):
-		value = getattr(self, property_name)
-		# Note: If we get an exception in this handler we won't know about it,
-		# only the side effect of no returned value!
-		log_debug('Get (%s), type (%s), value(%s)' %
-					(property_name, str(type(value)), str(value)))
-		return value
-
-	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
-							in_signature='s', out_signature='a{sv}')
-	def GetAll(self, interface_name):
-		if interface_name in self.interface(True):
-			# Using introspection, lets build this dynamically
-			properties = get_properties(self)
-			if interface_name in properties:
-				return properties[interface_name][1]
-			return {}
-		raise dbus.exceptions.DBusException(
-			self._ap_interface,
-			'The object %s does not implement the %s interface'
-			% (self.__class__, interface_name))
-
-	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
-							in_signature='ssv')
-	def Set(self, interface_name, property_name, new_value):
-		setattr(self, property_name, new_value)
-		self.PropertiesChanged(interface_name,
-								{property_name: new_value}, [])
-
-	# As dbus-python does not support introspection for properties we will
-	# get the autogenerated xml and then add our wanted properties to it.
-	@dbus.service.method(dbus_interface=dbus.INTROSPECTABLE_IFACE,
-							out_signature='s')
-	def Introspect(self):
-		r = dbus.service.Object.Introspect(self, self._ap_o_path, cfg.bus)
-		# Look at the properties in the class
-		props = get_properties(self)
-
-		for int_f, v in props.items():
-			r = add_properties(r, int_f, v[0])
-
-		return r
-
-	@dbus.service.signal(dbus_interface=dbus.PROPERTIES_IFACE,
-							signature='sa{sv}as')
-	def PropertiesChanged(self, interface_name, changed_properties,
-							invalidated_properties):
-		log_debug(('SIGNAL: PropertiesChanged(%s, %s, %s, %s)' %
-					(str(self._ap_o_path), str(interface_name),
-					str(changed_properties), str(invalidated_properties))))
-
-	def refresh(self, search_key=None, object_state=None):
-		"""
-		Take the values (properties) of an object and update them with what
-		lvm currently has.  You can either fetch the new ones or supply the
-		new state to be updated with
-		:param search_key: The value to use to search for
-		:param object_state: Use this as the new object state
-		"""
-		num_changed = 0
-
-		# If we can't do a lookup, bail now, this happens if we blindly walk
-		# through all dbus objects as some don't have a search method, like
-		# 'Manager' object.
-		if not self._ap_search_method:
-			return
-
-		search = self.lvm_id
-		if search_key:
-			search = search_key
-
-		# Either we have the new object state or we need to go fetch it
-		if object_state:
-			new_state = object_state
-		else:
-			new_state = self._ap_search_method([search])[0]
-			assert isinstance(new_state, State)
-
-		assert new_state
-
-		# When we refresh an object the object identifiers might have changed
-		# because LVM allows the user to change them (name & uuid), thus if
-		# they have changed we need to update the object manager so that
-		# look-ups will happen correctly
-		old_id = self.state.identifiers()
-		new_id = new_state.identifiers()
-		if old_id[0] != new_id[0] or old_id[1] != new_id[1]:
-			cfg.om.lookup_update(self, new_id[0], new_id[1])
-
-		# Grab the properties values, then replace the state of the object
-		# and retrieve the new values.
-		o_prop = get_properties(self)
-		self.state = new_state
-		n_prop = get_properties(self)
-
-		changed = get_object_property_diff(o_prop, n_prop)
-
-		if changed:
-			for int_f, v in changed.items():
-				self.PropertiesChanged(int_f, v, [])
-			num_changed += 1
-		return num_changed

daemons/lvmdbusd/background.py

@@ -1,142 +0,0 @@
-# Copyright (C) 2015-2016 Red Hat, Inc. All rights reserved.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-import subprocess
-from . import cfg
-from .cmdhandler import options_to_cli_args
-import dbus
-from .utils import pv_range_append, pv_dest_ranges, log_error, log_debug
-import os
-import threading
-
-
-def pv_move_lv_cmd(move_options, lv_full_name,
-					pv_source, pv_source_range, pv_dest_range_list):
-	cmd = ['pvmove', '-i', '1']
-	cmd.extend(options_to_cli_args(move_options))
-
-	if lv_full_name:
-		cmd.extend(['-n', lv_full_name])
-
-	pv_range_append(cmd, pv_source, *pv_source_range)
-	pv_dest_ranges(cmd, pv_dest_range_list)
-
-	return cmd
-
-
-def lv_merge_cmd(merge_options, lv_full_name):
-	cmd = ['lvconvert', '--merge', '-i', '1']
-	cmd.extend(options_to_cli_args(merge_options))
-	cmd.append(lv_full_name)
-	return cmd
-
-
-def _move_merge(interface_name, command, job_state):
-	# We need to execute these command stand alone by forking & exec'ing
-	# the command always as we will be getting periodic output from them on
-	# the status of the long running operation.
-	command.insert(0, cfg.LVM_CMD)
-	process = subprocess.Popen(command, stdout=subprocess.PIPE,
-								env=os.environ,
-								stderr=subprocess.PIPE, close_fds=True)
-
-	log_debug("Background process for %s is %d" %
-				(str(command), process.pid))
-
-	lines_iterator = iter(process.stdout.readline, b"")
-	for line in lines_iterator:
-		line_str = line.decode("utf-8")
-
-		# Check to see if the line has the correct number of separators
-		try:
-			if line_str.count(':') == 2:
-				(device, ignore, percentage) = line_str.split(':')
-				job_state.Percent = round(
-					float(percentage.strip()[:-1]), 1)
-		except ValueError:
-			log_error("Trying to parse percentage which failed for %s" %
-				line_str)
-
-	out = process.communicate()
-
-	if process.returncode == 0:
-		job_state.Percent = 100
-	else:
-		raise dbus.exceptions.DBusException(
-			interface_name,
-			'Exit code %s, stderr = %s' % (str(process.returncode), out[1]))
-
-	cfg.load()
-	return '/'
-
-
-def move(interface_name, lv_name, pv_src_obj, pv_source_range,
-			pv_dests_and_ranges, move_options, job_state):
-	"""
-	Common code for the pvmove handling.
-	:param interface_name:  What dbus interface we are providing for
-	:param lv_name:     Optional (None or name of LV to move)
-	:param pv_src_obj:  dbus object patch for source PV
-	:param pv_source_range: (0,0 to ignore, else start, end segments)
-	:param pv_dests_and_ranges: Array of PV object paths and start/end segs
-	:param move_options: Hash with optional arguments
-	:param job_state: Used to convey information about jobs between processes
-	:return: '/' When complete, the empty object path
-	"""
-	pv_dests = []
-	pv_src = cfg.om.get_object_by_path(pv_src_obj)
-	if pv_src:
-
-		# Check to see if we are handling a move to a specific
-		# destination(s)
-		if len(pv_dests_and_ranges):
-			for pr in pv_dests_and_ranges:
-				pv_dbus_obj = cfg.om.get_object_by_path(pr[0])
-				if not pv_dbus_obj:
-					raise dbus.exceptions.DBusException(
-						interface_name,
-						'PV Destination (%s) not found' % pr[0])
-
-				pv_dests.append((pv_dbus_obj.lvm_id, pr[1], pr[2]))
-
-		cmd = pv_move_lv_cmd(move_options,
-								lv_name,
-								pv_src.lvm_id,
-								pv_source_range,
-								pv_dests)
-
-		return _move_merge(interface_name, cmd, job_state)
-	else:
-		raise dbus.exceptions.DBusException(
-			interface_name, 'pv_src_obj (%s) not found' % pv_src_obj)
-
-
-def merge(interface_name, lv_uuid, lv_name, merge_options, job_state):
-	# Make sure we have a dbus object representing it
-	dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
-	if dbo:
-		cmd = lv_merge_cmd(merge_options, dbo.lvm_id)
-		return _move_merge(interface_name, cmd, job_state)
-	else:
-		raise dbus.exceptions.DBusException(
-			interface_name,
-			'LV with uuid %s and name %s not present!' % (lv_uuid, lv_name))
-
-
-def _run_cmd(req):
-	log_debug(
-		"_run_cmd: Running method: %s with args %s" %
-		(str(req.method), str(req.arguments)))
-	req.run_cmd()
-	log_debug("_run_cmd: complete!")
-
-
-def cmd_runner(request):
-	t = threading.Thread(target=_run_cmd, args=(request,))
-	t.start()

daemons/lvmdbusd/cfg.py

@@ -1,86 +0,0 @@
-# Copyright (C) 2015-2016 Red Hat, Inc. All rights reserved.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-import os
-import multiprocessing
-import queue
-import itertools
-
-from lvmdbusd import path
-
-LVM_CMD = os.getenv('LVM_BINARY', path.LVM_BINARY)
-
-# This is the global object manager
-om = None
-
-# This is the global bus connection
-bus = None
-
-# Command line args
-args = None
-
-# Set to true if we are depending on external events for updates
-ee = False
-
-# Shared state variable across all processes
-run = multiprocessing.Value('i', 1)
-
-# If this is set to true, the current setup support lvm shell and we are
-# running in that mode of operation
-SHELL_IN_USE = None
-
-# Lock used by pprint
-stdout_lock = multiprocessing.Lock()
-
-worker_q = queue.Queue()
-
-# Main event loop
-loop = None
-
-BUS_NAME = os.getenv('LVM_DBUS_NAME', 'com.redhat.lvmdbus1')
-BASE_INTERFACE = 'com.redhat.lvmdbus1'
-PV_INTERFACE = BASE_INTERFACE + '.Pv'
-VG_INTERFACE = BASE_INTERFACE + '.Vg'
-LV_INTERFACE = BASE_INTERFACE + '.Lv'
-LV_COMMON_INTERFACE = BASE_INTERFACE + '.LvCommon'
-THIN_POOL_INTERFACE = BASE_INTERFACE + '.ThinPool'
-CACHE_POOL_INTERFACE = BASE_INTERFACE + '.CachePool'
-LV_CACHED = BASE_INTERFACE + '.CachedLv'
-SNAPSHOT_INTERFACE = BASE_INTERFACE + '.Snapshot'
-MANAGER_INTERFACE = BASE_INTERFACE + '.Manager'
-JOB_INTERFACE = BASE_INTERFACE + '.Job'
-
-BASE_OBJ_PATH = '/' + BASE_INTERFACE.replace('.', '/')
-PV_OBJ_PATH = BASE_OBJ_PATH + '/Pv'
-VG_OBJ_PATH = BASE_OBJ_PATH + '/Vg'
-LV_OBJ_PATH = BASE_OBJ_PATH + '/Lv'
-THIN_POOL_PATH = BASE_OBJ_PATH + "/ThinPool"
-CACHE_POOL_PATH = BASE_OBJ_PATH + "/CachePool"
-HIDDEN_LV_PATH = BASE_OBJ_PATH + "/HiddenLv"
-MANAGER_OBJ_PATH = BASE_OBJ_PATH + '/Manager'
-JOB_OBJ_PATH = BASE_OBJ_PATH + '/Job'
-
-# Counters for object path generation
-pv_id = itertools.count()
-vg_id = itertools.count()
-lv_id = itertools.count()
-thin_id = itertools.count()
-cache_pool_id = itertools.count()
-job_id = itertools.count()
-hidden_lv = itertools.count()
-
-# Used to prevent circular imports...
-load = None
-event = None
-
-# Global cached state
-db = None
-
-# lvm flight recorder
-blackbox = None

daemons/lvmdbusd/cmdhandler.py

@@ -1,751 +0,0 @@
-# Copyright (C) 2015-2016 Red Hat, Inc. All rights reserved.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU General Public License v.2.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-from subprocess import Popen, PIPE
-import time
-import threading
-from itertools import chain
-import collections
-import traceback
-import os
-
-from lvmdbusd import cfg
-from lvmdbusd.utils import pv_dest_ranges, log_debug, log_error
-from lvmdbusd.lvm_shell_proxy import LVMShellProxy
-
-try:
-	import simplejson as json
-except ImportError:
-	import json
-
-SEP = '{|}'
-
-total_time = 0.0
-total_count = 0
-
-# We need to prevent different threads from using the same lvm shell
-# at the same time.
-cmd_lock = threading.RLock()
-
-
-class LvmExecutionMeta(object):
-
-	def __init__(self, start, ended, cmd, ec, stdout_txt, stderr_txt):
-		self.start = start
-		self.ended = ended
-		self.cmd = cmd
-		self.ec = ec
-		self.stdout_txt = stdout_txt
-		self.stderr_txt = stderr_txt
-
-	def __str__(self):
-		return "EC= %d for %s\n" \
-			"STARTED: %f, ENDED: %f\n" \
-			"STDOUT=%s\n" \
-			"STDERR=%s\n" % \
-			(self.ec, str(self.cmd), self.start, self.ended, self.stdout_txt,
-			self.stderr_txt)
-
-
-class LvmFlightRecorder(object):
-
-	def __init__(self, size=16):
-		self.queue = collections.deque(maxlen=size)
-
-	def add(self, lvm_exec_meta):
-		self.queue.append(lvm_exec_meta)
-
-	def dump(self):
-		with cmd_lock:
-			if len(self.queue):
-				log_error("LVM dbus flight recorder START")
-				for c in self.queue:
-					log_error(str(c))
-				log_error("LVM dbus flight recorder END")
-
-
-cfg.blackbox = LvmFlightRecorder()
-
-
-def _debug_c(cmd, exit_code, out):
-	log_error('CMD= %s' % ' '.join(cmd))
-	log_error(("EC= %d" % exit_code))
-	log_error(("STDOUT=\n %s\n" % out[0]))
-	log_error(("STDERR=\n %s\n" % out[1]))
-
-
-def call_lvm(command, debug=False):
-	"""
-	Call an executable and return a tuple of exitcode, stdout, stderr
-	:param command:     Command to execute
-	:param debug:       Dump debug to stdout
-	"""
-	# print 'STACK:'
-	# for line in traceback.format_stack():
-	#    print line.strip()
-
-	# Prepend the full lvm executable so that we can run different versions
-	# in different locations on the same box
-	command.insert(0, cfg.LVM_CMD)
-
-	process = Popen(command, stdout=PIPE, stderr=PIPE, close_fds=True,
-					env=os.environ)
-	out = process.communicate()
-
-	stdout_text = bytes(out[0]).decode("utf-8")
-	stderr_text = bytes(out[1]).decode("utf-8")
-
-	if debug or process.returncode != 0:
-		_debug_c(command, process.returncode, (stdout_text, stderr_text))
-
-	return process.returncode, stdout_text, stderr_text
-
-# The actual method which gets called to invoke the lvm command, can vary
-# from forking a new process to using lvm shell
-_t_call = call_lvm
-
-
-def _shell_cfg():
-	global _t_call
-	# noinspection PyBroadException
-	try:
-		lvm_shell = LVMShellProxy()
-		_t_call = lvm_shell.call_lvm
-		cfg.SHELL_IN_USE = lvm_shell
-		return True
-	except Exception:
-		_t_call = call_lvm
-		cfg.SHELL_IN_USE = None
-		log_error(traceback.format_exc())
-		log_error("Unable to utilize lvm shell, dropping back to fork & exec")
-		return False
-
-
-def set_execution(shell):
-	global _t_call
-	with cmd_lock:
-		# If the user requested lvm shell and we are currently setup that
-		# way, just return
-		if cfg.SHELL_IN_USE and shell:
-			return True
-		else:
-			if not shell and cfg.SHELL_IN_USE:
-				cfg.SHELL_IN_USE.exit_shell()
-				cfg.SHELL_IN_USE = None
-
-		_t_call = call_lvm
-		if shell:
-			if cfg.args.use_json:
-				return _shell_cfg()
-			else:
-				return False
-		return True
-
-
-def time_wrapper(command, debug=False):
-	global total_time
-	global total_count
-
-	with cmd_lock:
-		start = time.time()
-		results = _t_call(command, debug)
-		ended = time.time()
-		total_time += (ended - start)
-		total_count += 1
-		cfg.blackbox.add(LvmExecutionMeta(start, ended, command, *results))
-	return results
-
-
-call = time_wrapper
-
-
-# Default cmd
-# Place default arguments for every command here.
-def _dc(cmd, args):
-	c = [cmd, '--noheading', '--separator', '%s' % SEP, '--nosuffix',
-		'--unbuffered', '--units', 'b']
-	c.extend(args)
-	return c
-
-
-def parse(out):
-	rc = []
-
-	for line in out.split('\n'):
-		# This line includes separators, so process them
-		if SEP in line:
-			elem = line.split(SEP)
-			cleaned_elem = []
-			for e in elem:
-				e = e.strip()
-				cleaned_elem.append(e)
-
-			if len(cleaned_elem) > 1:
-				rc.append(cleaned_elem)
-		else:
-			t = line.strip()
-			if len(t) > 0:
-				rc.append(t)
-	return rc
-
-
-def parse_column_names(out, column_names):
-	lines = parse(out)
-	rc = []
-
-	for i in range(0, len(lines)):
-		d = dict(list(zip(column_names, lines[i])))
-		rc.append(d)
-
-	return rc
-
-
-def options_to_cli_args(options):
-	rc = []
-	for k, v in list(dict(options).items()):
-		if k.startswith("-"):
-			rc.append(k)
-		else:
-			rc.append("--%s" % k)
-		if v != "":
-			rc.append(str(v))
-	return rc
-
-
-def pv_remove(device, remove_options):
-	cmd = ['pvremove']
-	cmd.extend(options_to_cli_args(remove_options))
-	cmd.append(device)
-	return call(cmd)
-
-
-def _qt(tag_name):
-	return '@%s' % tag_name
-
-
-def _tag(operation, what, add, rm, tag_options):
-	cmd = [operation]
-	cmd.extend(options_to_cli_args(tag_options))
-
-	if isinstance(what, list):
-		cmd.extend(what)
-	else:
-		cmd.append(what)
-
-	if add:
-		cmd.extend(list(chain.from_iterable(
-			('--addtag', _qt(x)) for x in add)))
-	if rm:
-		cmd.extend(list(chain.from_iterable(
-			('--deltag', _qt(x)) for x in rm)))
-
-	return call(cmd, False)
-
-
-def pv_tag(pv_devices, add, rm, tag_options):
-	return _tag('pvchange', pv_devices, add, rm, tag_options)
-
-
-def vg_tag(vg_name, add, rm, tag_options):
-	return _tag('vgchange', vg_name, add, rm, tag_options)
-
-
-def lv_tag(lv_name, add, rm, tag_options):
-	return _tag('lvchange', lv_name, add, rm, tag_options)
-
-
-def vg_rename(vg, new_name, rename_options):
-	cmd = ['vgrename']
-	cmd.extend(options_to_cli_args(rename_options))
-	cmd.extend([vg, new_name])
-	return call(cmd)
-
-
-def vg_remove(vg_name, remove_options):
-	cmd = ['vgremove']
-	cmd.extend(options_to_cli_args(remove_options))
-	cmd.extend(['-f', vg_name])
-	return call(cmd)
-
-
-def vg_lv_create(vg_name, create_options, name, size_bytes, pv_dests):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(create_options))
-	cmd.extend(['--size', str(size_bytes) + 'B'])
-	cmd.extend(['--name', name, vg_name])
-	pv_dest_ranges(cmd, pv_dests)
-	return call(cmd)
-
-
-def vg_lv_snapshot(vg_name, snapshot_options, name, size_bytes):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(snapshot_options))
-	cmd.extend(["-s"])
-
-	if size_bytes != 0:
-		cmd.extend(['--size', str(size_bytes) + 'B'])
-
-	cmd.extend(['--name', name, vg_name])
-	return call(cmd)
-
-
-def vg_lv_create_linear(vg_name, create_options, name, size_bytes, thin_pool):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(create_options))
-
-	if not thin_pool:
-		cmd.extend(['--size', str(size_bytes) + 'B'])
-	else:
-		cmd.extend(['--thin', '--size', str(size_bytes) + 'B'])
-	cmd.extend(['--name', name, vg_name])
-	return call(cmd)
-
-
-def vg_lv_create_striped(vg_name, create_options, name, size_bytes,
-							num_stripes, stripe_size_kb, thin_pool):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(create_options))
-
-	if not thin_pool:
-		cmd.extend(['--size', str(size_bytes) + 'B'])
-	else:
-		cmd.extend(['--thin', '--size', str(size_bytes) + 'B'])
-
-	cmd.extend(['--stripes', str(num_stripes)])
-
-	if stripe_size_kb != 0:
-		cmd.extend(['--stripesize', str(stripe_size_kb)])
-
-	cmd.extend(['--name', name, vg_name])
-	return call(cmd)
-
-
-def _vg_lv_create_raid(vg_name, create_options, name, raid_type, size_bytes,
-						num_stripes, stripe_size_kb):
-	cmd = ['lvcreate']
-
-	cmd.extend(options_to_cli_args(create_options))
-
-	cmd.extend(['--type', raid_type])
-	cmd.extend(['--size', str(size_bytes) + 'B'])
-
-	if num_stripes != 0:
-		cmd.extend(['--stripes', str(num_stripes)])
-
-	if stripe_size_kb != 0:
-		cmd.extend(['--stripesize', str(stripe_size_kb)])
-
-	cmd.extend(['--name', name, vg_name])
-	return call(cmd)
-
-
-def vg_lv_create_raid(vg_name, create_options, name, raid_type, size_bytes,
-						num_stripes, stripe_size_kb):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(create_options))
-
-	return _vg_lv_create_raid(vg_name, create_options, name, raid_type,
-								size_bytes, num_stripes, stripe_size_kb)
-
-
-def vg_lv_create_mirror(
-		vg_name, create_options, name, size_bytes, num_copies):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(create_options))
-
-	cmd.extend(['--type', 'mirror'])
-	cmd.extend(['--mirrors', str(num_copies)])
-	cmd.extend(['--size', str(size_bytes) + 'B'])
-	cmd.extend(['--name', name, vg_name])
-	return call(cmd)
-
-
-def vg_create_cache_pool(md_full_name, data_full_name, create_options):
-	cmd = ['lvconvert']
-	cmd.extend(options_to_cli_args(create_options))
-	cmd.extend(['--type', 'cache-pool', '--force', '-y',
-				'--poolmetadata', md_full_name, data_full_name])
-	return call(cmd)
-
-
-def vg_create_thin_pool(md_full_name, data_full_name, create_options):
-	cmd = ['lvconvert']
-	cmd.extend(options_to_cli_args(create_options))
-	cmd.extend(['--type', 'thin-pool', '--force', '-y',
-				'--poolmetadata', md_full_name, data_full_name])
-	return call(cmd)
-
-
-def lv_remove(lv_path, remove_options):
-	cmd = ['lvremove']
-	cmd.extend(options_to_cli_args(remove_options))
-	cmd.extend(['-f', lv_path])
-	return call(cmd)
-
-
-def lv_rename(lv_path, new_name, rename_options):
-	cmd = ['lvrename']
-	cmd.extend(options_to_cli_args(rename_options))
-	cmd.extend([lv_path, new_name])
-	return call(cmd)
-
-
-def lv_resize(lv_full_name, size_change, pv_dests,
-				resize_options):
-	cmd = ['lvresize', '--force']
-
-	cmd.extend(options_to_cli_args(resize_options))
-
-	if size_change < 0:
-		cmd.append("-L-%dB" % (-size_change))
-	else:
-		cmd.append("-L+%dB" % (size_change))
-
-	cmd.append(lv_full_name)
-	pv_dest_ranges(cmd, pv_dests)
-	return call(cmd)
-
-
-def lv_lv_create(lv_full_name, create_options, name, size_bytes):
-	cmd = ['lvcreate']
-	cmd.extend(options_to_cli_args(create_options))
-	cmd.extend(['--virtualsize', str(size_bytes) + 'B', '-T'])
-	cmd.extend(['--name', name, lv_full_name])
-	return call(cmd)
-
-
-def lv_cache_lv(cache_pool_full_name, lv_full_name, cache_options):
-	# lvconvert --type cache --cachepool VG/CachePoolLV VG/OriginLV
-	cmd = ['lvconvert']
-	cmd.extend(options_to_cli_args(cache_options))
-	cmd.extend(['-y', '--type', 'cache', '--cachepool',
-				cache_pool_full_name, lv_full_name])
-	return call(cmd)
-
-
-def lv_detach_cache(lv_full_name, detach_options, destroy_cache):
-	cmd = ['lvconvert']
-	if destroy_cache:
-		option = '--uncache'
-	else:
-		# Currently fairly dangerous
-		# see: https://bugzilla.redhat.com/show_bug.cgi?id=1248972
-		option = '--splitcache'
-	cmd.extend(options_to_cli_args(detach_options))
-	# needed to prevent interactive questions
-	cmd.extend(["--yes", "--force"])
-	cmd.extend([option, lv_full_name])
-	return call(cmd)
-
-
-def supports_json():
-	cmd = ['help']
-	rc, out, err = call(cmd)
-	if rc == 0:
-		if cfg.SHELL_IN_USE:
-			return True
-		else:
-			if 'fullreport' in err:
-				return True
-	return False
-
-
-def lvm_full_report_json():
-	pv_columns = ['pv_name', 'pv_uuid', 'pv_fmt', 'pv_size', 'pv_free',
-					'pv_used', 'dev_size', 'pv_mda_size', 'pv_mda_free',
-					'pv_ba_start', 'pv_ba_size', 'pe_start', 'pv_pe_count',
-					'pv_pe_alloc_count', 'pv_attr', 'pv_tags', 'vg_name',
-					'vg_uuid', 'pv_missing']
-
-	pv_seg_columns = ['pvseg_start', 'pvseg_size', 'segtype',
-						'pv_uuid', 'lv_uuid', 'pv_name']
-
-	vg_columns = ['vg_name', 'vg_uuid', 'vg_fmt', 'vg_size', 'vg_free',
-					'vg_sysid', 'vg_extent_size', 'vg_extent_count',
-					'vg_free_count', 'vg_profile', 'max_lv', 'max_pv',
-					'pv_count', 'lv_count', 'snap_count', 'vg_seqno',
-					'vg_mda_count', 'vg_mda_free', 'vg_mda_size',
-					'vg_mda_used_count', 'vg_attr', 'vg_tags']
-
-	lv_columns = ['lv_uuid', 'lv_name', 'lv_path', 'lv_size',
-				'vg_name', 'pool_lv_uuid', 'pool_lv', 'origin_uuid',
-				'origin', 'data_percent',
-				'lv_attr', 'lv_tags', 'vg_uuid', 'lv_active', 'data_lv',
-				'metadata_lv', 'lv_parent', 'lv_role', 'lv_layout',
-				'snap_percent', 'metadata_percent', 'copy_percent',
-				'sync_percent', 'lv_metadata_size', 'move_pv', 'move_pv_uuid']
-
-	lv_seg_columns = ['seg_pe_ranges', 'segtype', 'lv_uuid']
-
-	cmd = _dc('fullreport', [
-		'-a',		# Need hidden too
-		'--configreport', 'pv', '-o', ','.join(pv_columns),
-		'--configreport', 'vg', '-o', ','.join(vg_columns),
-		'--configreport', 'lv', '-o', ','.join(lv_columns),
-		'--configreport', 'seg', '-o', ','.join(lv_seg_columns),
-		'--configreport', 'pvseg', '-o', ','.join(pv_seg_columns),
-		'--reportformat', 'json'
-	])
-
-	rc, out, err = call(cmd)
-	if rc == 0:
-		# With the current implementation, if we are using the shell then we
-		# are using JSON and JSON is returned back to us as it was parsed to
-		# figure out if we completed OK or not
-		if cfg.SHELL_IN_USE:
-			assert(type(out) == dict)
-			return out
-		else:
-			return json.loads(out)
-	return None
-
-
-def pv_retrieve_with_segs(device=None):
-	d = []
-	err = ""
-	out = ""
-	rc = 0
-
-	columns = ['pv_name', 'pv_uuid', 'pv_fmt', 'pv_size', 'pv_free',
-				'pv_used', 'dev_size', 'pv_mda_size', 'pv_mda_free',
-				'pv_ba_start', 'pv_ba_size', 'pe_start', 'pv_pe_count',
-				'pv_pe_alloc_count', 'pv_attr', 'pv_tags', 'vg_name',
-				'vg_uuid', 'pvseg_start', 'pvseg_size', 'segtype', 'pv_missing']
-
-	# Lvm has some issues where it returns failure when querying pvs when other
-	# operations are in process, see:
-	# https://bugzilla.redhat.com/show_bug.cgi?id=1274085
-	for i in range(0, 10):
-		cmd = _dc('pvs', ['-o', ','.join(columns)])
-
-		if device:
-			cmd.extend(device)
-
-		rc, out, err = call(cmd)
-
-		if rc == 0:
-			d = parse_column_names(out, columns)
-			break
-		else:
-			time.sleep(0.2)
-			log_debug("LVM Bug workaround, retrying pvs command...")
-
-	if rc != 0:
-		msg = "We were unable to get pvs to return without error after " \
-			"trying 10 times, RC=%d, STDERR=(%s), STDOUT=(%s)" % \
-			(rc, err, out)
-		log_error(msg)
-		raise RuntimeError(msg)
-
-	return d
-
-
-def pv_resize(device, size_bytes, create_options):
-	cmd = ['pvresize']
-
-	cmd.extend(options_to_cli_args(create_options))
-
-	if size_bytes != 0:
-		cmd.extend(['--setphysicalvolumesize', str(size_bytes) + 'B'])
-
-	cmd.extend([device])
-	return call(cmd)
-
-
-def pv_create(create_options, devices):
-	cmd = ['pvcreate', '-ff']
-	cmd.extend(options_to_cli_args(create_options))
-	cmd.extend(devices)
-	return call(cmd)
-
-
-def pv_allocatable(device, yes, allocation_options):
-	yn = 'n'
-
-	if yes:
-		yn = 'y'
-
-	cmd = ['pvchange']
-	cmd.extend(options_to_cli_args(allocation_options))
-	cmd.extend(['-x', yn, device])
-	return call(cmd)
-
-
-def pv_scan(activate, cache, device_paths, major_minors, scan_options):
-	cmd = ['pvscan']
-	cmd.extend(options_to_cli_args(scan_options))
-
-	if activate:
-		cmd.extend(['--activate', "ay"])
-
-	if cache:
-		cmd.append('--cache')
-
-		if len(device_paths) > 0:
-			for d in device_paths:
-				cmd.append(d)
-
-		if len(major_minors) > 0:
-			for mm in major_minors:
-				cmd.append("%s:%s" % (mm))
-
-	return call(cmd)
-
-
-def vg_create(create_options, pv_devices, name):
-	cmd = ['vgcreate']
-	cmd.extend(options_to_cli_args(create_options))
-	cmd.append(name)
-	cmd.extend(pv_devices)
-	return call(cmd)
-
-
-def vg_change(change_options, name):
-	cmd = ['vgchange']
-	cmd.extend(options_to_cli_args(change_options))
-	cmd.append(name)
-	return call(cmd)
-
-
-def vg_reduce(vg_name, missing, pv_devices, reduce_options):
-	cmd = ['vgreduce']
-	cmd.extend(options_to_cli_args(reduce_options))
-
-	if len(pv_devices) == 0:
-		cmd.append('--all')
-	if missing:
-		cmd.append('--removemissing')
-
-	cmd.append(vg_name)
-	cmd.extend(pv_devices)
-	return call(cmd)
-
-
-def vg_extend(vg_name, extend_devices, extend_options):
-	cmd = ['vgextend']
-	cmd.extend(options_to_cli_args(extend_options))
-	cmd.append(vg_name)
-	cmd.extend(extend_devices)
-	return call(cmd)
-
-
-def _vg_value_set(name, arguments, options):
-	cmd = ['vgchange']
-	cmd.extend(options_to_cli_args(options))
-	cmd.append(name)
-	cmd.extend(arguments)
-	return call(cmd)
-
-
-def vg_allocation_policy(vg_name, policy, policy_options):
-	return _vg_value_set(vg_name, ['--alloc', policy], policy_options)
-
-
-def vg_max_pv(vg_name, number, max_options):
-	return _vg_value_set(vg_name, ['--maxphysicalvolumes', str(number)],
-							max_options)
-
-
-def vg_max_lv(vg_name, number, max_options):
-	return _vg_value_set(vg_name, ['-l', str(number)], max_options)
-
-
-def vg_uuid_gen(vg_name, ignore, options):
-	assert ignore is None
-	return _vg_value_set(vg_name, ['--uuid'], options)
-
-
-def activate_deactivate(op, name, activate, control_flags, options):
-	cmd = [op]
-	cmd.extend(options_to_cli_args(options))
-
-	op = '-a'
-
-	if control_flags:
-		# Autoactivation
-		if (1 << 0) & control_flags:
-			op += 'a'
-		# Exclusive locking (Cluster)
-		if (1 << 1) & control_flags:
-			op += 'e'
-
-		# Local node activation
-		if (1 << 2) & control_flags:
-			op += 'l'
-
-		# Activation modes
-		if (1 << 3) & control_flags:
-			cmd.extend(['--activationmode', 'complete'])
-		elif (1 << 4) & control_flags:
-			cmd.extend(['--activationmode', 'partial'])
-
-		# Ignore activation skip
-		if (1 << 5) & control_flags:
-			cmd.append('--ignoreactivationskip')
-
-	if activate:
-		op += 'y'
-	else:
-		op += 'n'
-
-	cmd.append(op)
-	cmd.append(name)
-	return call(cmd)
-
-
-def vg_retrieve(vg_specific):
-	if vg_specific:
-		assert isinstance(vg_specific, list)
-
-	columns = ['vg_name', 'vg_uuid', 'vg_fmt', 'vg_size', 'vg_free',
-				'vg_sysid', 'vg_extent_size', 'vg_extent_count',
-				'vg_free_count', 'vg_profile', 'max_lv', 'max_pv',
-				'pv_count', 'lv_count', 'snap_count', 'vg_seqno',
-				'vg_mda_count', 'vg_mda_free', 'vg_mda_size',
-				'vg_mda_used_count', 'vg_attr', 'vg_tags']
-
-	cmd = _dc('vgs', ['-o', ','.join(columns)])
-
-	if vg_specific:
-		cmd.extend(vg_specific)
-
-	d = []
-	rc, out, err = call(cmd)
-	if rc == 0:
-		d = parse_column_names(out, columns)
-
-	return d
-
-
-def lv_retrieve_with_segments():
-	columns = ['lv_uuid', 'lv_name', 'lv_path', 'lv_size',
-				'vg_name', 'pool_lv_uuid', 'pool_lv', 'origin_uuid',
-				'origin', 'data_percent',
-				'lv_attr', 'lv_tags', 'vg_uuid', 'lv_active', 'data_lv',
-				'metadata_lv', 'seg_pe_ranges', 'segtype', 'lv_parent',
-				'lv_role', 'lv_layout',
-				'snap_percent', 'metadata_percent', 'copy_percent',
-				'sync_percent', 'lv_metadata_size', 'move_pv', 'move_pv_uuid']
-
-	cmd = _dc('lvs', ['-a', '-o', ','.join(columns)])
-	rc, out, err = call(cmd)
-
-	d = []
-
-	if rc == 0:
-		d = parse_column_names(out, columns)
-
-	return d
-
-
-if __name__ == '__main__':
-	pv_data = pv_retrieve_with_segs()
-
-	for p in pv_data:
-		print(str(p))