lvchange: make use of command definitions

Reorganize the lvchange code to take advantage of
the command definition, and remove the validation
that is done by the command definintion rules.

Makefile.in

@@ -59,8 +59,6 @@ liblvm: lib
 daemons: lib libdaemon tools
 tools: lib libdaemon device-mapper
 po: tools daemons
-man: tools
-all_man: tools
 scripts: liblvm libdm
 
 lib.device-mapper: include.device-mapper
@@ -100,7 +98,7 @@ CLEAN_DIRS += autom4te.cache
 check check_system check_cluster check_local check_lvmetad check_lvmpolld check_lvmlockd_test check_lvmlockd_dlm check_lvmlockd_sanlock unit: all
 	$(MAKE) -C test $(@)
 
-conf.generate man.generate: tools
+conf.generate: tools
 
 # how to use parenthesis in makefiles
 leftparen:=(
@@ -130,9 +128,8 @@ rpm: dist
 	    $(top_srcdir)/spec/source.inc >$(rpmbuilddir)/SOURCES/source.inc
 	rpmbuild -v --define "_topdir $(rpmbuilddir)" -ba $(top_srcdir)/spec/lvm2.spec
 
-generate: conf.generate man.generate
+generate: conf.generate
 	$(MAKE) -C conf generate
-	$(MAKE) -C man generate
 
 all_man:
 	$(MAKE) -C man all_man

README

@@ -6,12 +6,11 @@ Installation instructions are in INSTALL.
 There is no warranty - see COPYING and COPYING.LIB.
 
 Tarballs are available from:
-  ftp://sourceware.org/pub/lvm2/
   ftp://sources.redhat.com/pub/lvm2/
 
 The source code is stored in git:
-  https://sourceware.org/git/?p=lvm2.git
-  git clone git://sourceware.org/git/lvm2.git
+  http://git.fedorahosted.org/git/lvm2.git
+  git clone git://git.fedorahosted.org/git/lvm2.git
 
 Mailing list for general discussion related to LVM2:
   linux-lvm@redhat.com

VERSION

@@ -1 +1 @@
-2.02.174(2)-git (2017-07-20)
+2.02.168(2)-git (2016-11-05)

VERSION_DM

@@ -1 +1 @@
-1.02.143-git (2017-07-20)
+1.02.137-git (2016-11-05)

WHATS_NEW

@@ -1,192 +1,6 @@
-Version 2.02.174 - 
-=================================
-  Fix check for 2nd mda at end of disk fits if using pvcreate --restorefile.
-  Use maximum metadataarea size that fits with pvcreate --restorefile.
-  Always clear cached bootloaderarea when wiping label e.g. in pvcreate.
-  Disallow --bootloaderareasize with pvcreate --restorefile.
-  Fix lvmlockd check for running lock managers during lock adoption.
-  Add --withgeneralpreamble and --withlocalpreamble to lvmconfig.
-  Improve makefiles' linking.
-  Fix some paths in generated makefiles to respected configured settings.
-  Add warning when creating thin-pool with zeroing and chunk size >= 512KiB.
-  Introduce exit code 4 EINIT_FAILED to replace -1 when initialisation fails.
-  Add synchronization points with udev during reshape of raid LVs.
-
-Version 2.02.173 - 20th July 2017
-=================================
-  Add synchronization points with udev during conversion of raid LVs.
-  Improve --size args validation and report more detailed error message.
-  Initialize debugging mutex before any debug message in clvmd.
-  Log error instead of warn when noticing connection problem with lvmetad.
-  Fix memory leak in lvmetad when working with duplicates.
-  Remove restrictions on reshaping open and clustered raid devices.
-  Add incompatible data_offset to raid metadata to fix reshape activation.
-  Accept 'lvm -h' and 'lvm --help' as well as 'lvm help' for help.
-  Suppress error message from accept() on clean lvmetad shutdown.
-  Tidy clvmd client list processing and fix segfaults.
-  Protect clvmd debug log messages with mutex and add client id.
-  Fix shellcheck reported issues for script files.
-
-Version 2.02.172 - 28th June 2017
-=================================
-  Add missing NULL to argv array when spliting cmdline arguments.
-  Add display_percent helper function for printing percent values.
-  lvconvert --repair handles failing raid legs (present but marked 'D'ead).
-  Do not lvdisplay --maps unset settings of cache pool.
-  Fix lvdisplay --maps for cache pool without policy settings.
-  Support aborting of flushing cache LV.
-  Reenable conversion of data and metadata thin-pool volumes to raid.
-  Improve raid status reporting with lvs.
-  No longer necessary to '--force' a repair for RAID1.
-  Linear to RAID1 upconverts now use "recover" sync action, not "resync".
-  Improve lvcreate --cachepool arg validation.
-  Limit maximum size of thin-pool for specific chunk size.
-  Print a warning about in-use PVs with no VG using them.
-  Disable automatic clearing of PVs that look like in-use orphans.
-  Cache format2 flag is now using segment name type field.
-  Support storing status flags via segtype name field.
-  Stop using '--yes' mode when fsadm runs without terminal.
-  Extend validation of filesystems resized by fsadm.
-  Enhance lvconvert automatic settings of possible (raid) LV types.
-  Allow lvchange to change properties on a thin pool data sub LV.
-  Fix lvcreate extent percentage calculation for mirrors.
-  Don't reinstate still-missing devices when correcting inconsistent metadata.
-  Properly handle subshell return codes in fsadm.
-  Disallow cachepool creation with policy cleaner and mode writeback.
-
-Version 2.02.171 - 3rd May 2017
-===============================
-  Fix memory warnings by using mempools for command definition processing.
-  Fix running commands from a script file.
-  Add pvcreate prompt when device size doesn't match setphysicalvolumesize.
-  lvconvert - preserve region size on raid1 image count changes
-  Adjust pvresize/pvcreate messages and prompt if underlying dev size differs.
-  raid - sanely handle insufficient space on takeover.
-  Fix configure --enable-notify-dbus status message.
-  Change configure option name prefix from --enable-lockd to --enable-lvmlockd.
-  lvcreate - raise mirror/raid default regionsize to 2MiB
-  Add missing configurable prefix to configuration file installation directory.
-
-Version 2.02.170 - 13th April 2017
-==================================
-  Introduce global/fsadm_executable to make fsadm path configurable.
-  Look for limited thin pool metadata size when using 16G metadata.
-  Add lvconvert pool creation rule disallowing options with poolmetadata.
-  Fix lvconvert when the same LV is incorrectly reused in options.
-  Fix lvconvert VG name validation in option values.
-  Fix missing lvmlockd LV locks in lvchange and lvconvert.
-  Fix dmeventd setup for lvchange --poll.
-  Fix use of --poll and --monitor with lvchange and vgchange.
-  Disallow lvconvert of hidden LV to a pool.
-  Ignore --partial option when not used for activation.
-  Allow --activationmode option with lvchange --refresh.
-  Better message on lvconvert --regionsize
-  Allow valid lvconvert --regionsize change
-  Add raid10 alias raid10_near
-  Handle insufficient PVs on lvconvert takeover
-  Fix SIGINT blocking to prevent corrupted metadata
-  Fix systemd unit existence check for lvmconf --services --startstopservices.
-  Check and use PATH_MAX buffers when creating vgrename device paths.
-
-Version 2.02.169 - 28th March 2017
-==================================
-  Automatically decide whether '-' in a man page is a hyphen or a minus sign.
-  Add build-time configuration command line to 'lvm version' output.
-  Handle known table line parameter order change in specific raid target vsns.
-  Conditionally reject raid convert to striped/raid0* after reshape.
-  Ensure raid6 upconversion restrictions.
-  Adjust mirror & raid dmeventd plugins for new lvconvert --repair behaviour.
-  Disable lvmetad when lvconvert --repair is run.
-  Remove obsolete lvmchange binary - convert to built-in command.
-  Show more information for cached volumes in lvdisplay [-m].
-  Add option for lvcreate/lvconvert --cachemetadataformat auto|1|2.
-  Support cache segment with configurable metadata format.
-  Add allocation/cache_metadata_format profilable settings.
-  Use function cache_set_params() for both lvcreate and lvconvert.
-  Skip rounding on cache chunk size boudary when create cache LV.
-  Improve cache_set_params support for chunk_size selection.
-  Fix metadata profile allocation/cache_[mode|policy] setting.
-  Fix missing support for using allocation/cache_pool_chunk_size setting.
-  Upstream git moved to https://sourceware.org/git/?p=lvm2
-  Support conversion of raid type, stripesize and number of disks
-  Reject writemostly/writebehind in lvchange during resynchronization.
-  Deactivate active origin first before removal for improved workflow.
-  Fix regression of accepting both --type and -m with lvresize. (2.02.158)
-  Add lvconvert --swapmetadata, new specific way to swap pool metadata LVs.
-  Add lvconvert --startpoll, new specific way to start polling conversions.
-  Add lvconvert --mergethin, new specific way to merge thin snapshots.
-  Add lvconvert --mergemirrors, new specific way to merge split mirrors.
-  Add lvconvert --mergesnapshot, new specific way to combine cow LVs.
-  Split up lvconvert code based on command definitions.
-  Split up lvchange code based on command definitions.
-  Generate help output and man pages from command definitions.
-  Verify all command line items against command definition.
-  Match every command run to one command definition.
-  Specify every allowed command definition/syntax in command-lines.in.
-  Add extra memory page when limiting pthread stack size in clvmd.
-  Support striped/raid0* <-> raid10_near conversions.
-  Support shrinking of RaidLVs.
-  Support region size changes on existing RaidLVs.
-  Avoid parallel usage of cpg_mcast_joined() in clvmd with corosync.
-  Support raid6_{ls,rs,la,ra}_6 segment types and conversions from/to it.
-  Support raid6_n_6 segment type and conversions from/to it.
-  Support raid5_n segment type and conversions from/to it.
-  Support new internal command _dmeventd_thin_command.
-  Introduce new dmeventd/thin_command configurable setting.
-  Use new default units 'r' for displaying sizes.
-  Also unmount mount point on top of MD device if using blkdeactivate -u.
-  Restore check preventing resize of cache type volumes (2.02.158).
-  Add missing udev sync when flushing dirty cache content.
-  vgchange -p accepts only uint32 numbers.
-  Report thin LV date for merged LV when the merge is in progress.
-  Detect if snapshot merge really started before polling for progress.
-  Checking LV for merging origin requires also it has merged snapshot.
-  Extend validation of metadata processing.
-  Enable usage of cached volumes as snapshot origin LV.
-  Fix displayed lv name when splitting snapshot (2.02.146).
-  Warn about command not making metadata backup just once per command.
-  Enable usage of cached volume as thin volume's external origin.
-  Support cache volume activation with -real layer.
-  Improve search of lock-holder for external origin and thin-pool.
-  Support status checking of cache volume used in layer.
-  Avoid shifting by one number of blocks when clearing dirty cache volume.
-  Extend metadata validation of external origin LV use count.
-  Fix dm table when the last user of active external origin is removed.
-  Improve reported lvs status for active external origin volume.
-  Fix table load for splitted RAID LV and require explicit activation.
-  Always active splitted RAID LV exclusively locally.
-  Do not use LV RAID status bit for segment status.
-  Check segtype directly instead of checking RAID in segment status.
-  Reusing exiting code for raid image removal.
-  Fix pvmove leaving -pvmove0 error device in clustered VG.
-  Avoid adding extra '_' at end of raid extracted images or metadata.
-  Optimize another _rmeta clearing code.
-  Fix deactivation of raid orphan devices for clustered VG.
-  Fix lvconvert raid1 to mirror table reload order.
-  Add internal function for separate mirror log preparation.
-  Fix segfault in lvmetad from missing NULL in daemon_reply_simple.
-  Simplify internal _info_run() and use _setup_task_run() for mknod.
-  Better API for internal function _setup_task_run.
-  Avoid using lv_has_target_type() call within lv_info_with_seg_status.
-  Simplify internal lv_info_with_seg_status API.
-  Decide which status is needed in one place for lv_info_with_seg_status.
-  Fix matching of LV segment when checking for it info status.
-  Report log_warn when status cannot be parsed.
-  Test segment type before accessing segment members when checking status.
-  Implement compatible target function for stripe segment.
-  Use status info to report merge failed and snapshot invalid lvs fields.
-
-Version 2.02.168 - 30th November 2016
-=====================================
-  Display correct sync_percent on large RaidLVs
-  lvmdbusd --blackboxsize <n> added, used to override default size of 16
-  Allow a transiently failed RaidLV to be refreshed
-  Use lv_update_and_reload() inside mirror code where it applies.
-  Preserve mirrored status for temporary layered mirrors.
-  Use transient raid check before repairing raid volume.
-  Implement transient status check for raid volumes.
+Version 2.02.168 - 
+====================================
   Only log msg as debug if lvm2-lvmdbusd unit missing for D-Bus notification.
-  Avoid duplicated underscore in name of extracted LV image.
   Missing stripe filler now could be also 'zero'.
   lvconvert --repair accepts --interval and --background option.
   More efficiently prepare _rmeta devices when creating a new raid LV.

WHATS_NEW_DM

@@ -1,61 +1,5 @@
-Version 1.02.143 - 
-=================================
-  Add --concise to dmsetup create for many devices with tables in one command.
-  Accept minor number without major in library when it knows dm major number.
-  Introduce single-line concise table output format: dmsetup table --concise
-
-Version 1.02.142 - 20th July 2017
-=================================
-  Create /dev/disk/by-part{uuid,label} and gpt-auto-root symlinks with udev.
-
-Version 1.02.141 - 28th June 2017
-=================================
-  Fix reusing of dm_task structure for status reading (used by dmeventd).
-  Add dm_percent_to_round_float for adjusted percentage rounding.
-  Reset array with dead rimage devices once raid gets in sync.
-  Drop unneeded --config option from raid dmeventd plugin.
-  dm_get_status_raid() handle better some incosistent md statuses.
-  Accept truncated files in calls to dm_stats_update_regions_from_fd().
-  Restore Warning by 5% increment when thin-pool is over 80% (1.02.138).
-
-Version 1.02.140 - 3rd May 2017
-===============================
-  Add missing configure --enable-dmfilemapd status message and fix --disable.
-
-Version 1.02.139 - 13th April 2017
-==================================
-  Fix assignment in _target_version() when dm task can't run.
-  Flush stdout on each iteration when using --count or --interval.
-  Show detailed error message when execvp fails while starting dmfilemapd.
-  Fix segmentation fault when dmfilemapd is run with no arguments.
-  Numerous minor dmfilemapd fixes from coverity.
-
-Version 1.02.138 - 28th March 2017
-==================================
-  Support additional raid5/6 configurations.
-  Provide dm_tree_node_add_cache_target@base compatible symbol.
-  Support DM_CACHE_FEATURE_METADATA2, new cache metadata format 2.
-  Improve code to handle mode mask for cache nodes.
-  Cache status check for passthrough also require trailing space.
-  Add extra memory page when limiting pthread stack size in dmeventd.
-  Avoids immediate resume when preloaded device is smaller.
-  Do not suppress kernel key description in dmsetup table output for dm-crypt.
-  Support configurable command executed from dmeventd thin plugin.
-  Support new R|r human readable units output format.
-  Thin dmeventd plugin reacts faster on lvextend failure path with umount.
-  Add dm_stats_bind_from_fd() to bind a stats handle from a file descriptor.
-  Do not try call callback when reverting activation on error path.
-  Fix file mapping for extents with physically adjacent extents in dmstats.
-  Validation vsnprintf result in runtime translate of dm_log (1.02.136).
-  Separate filemap extent allocation from region table in dmstats.
-  Fix segmentation fault when filemap region creation fails in dmstats.
-  Fix performance of region cleanup for failed filemap creation in dmstats.
-  Fix very slow region deletion with many regions in dmstats.
-
-Version 1.02.137 - 30th November 2016
-=====================================
-  Document raid status values.
-  Always exit dmsetup with success when asked to display help/version.
+Version 1.02.137 - 
+====================================
 
 Version 1.02.136 - 5th November 2016
 ====================================

acinclude.m4

@@ -61,174 +61,3 @@ AC_DEFUN([AC_TRY_LDFLAGS],
         ifelse([$4], [], [:], [$4])
     fi
 ])
-
-# ===========================================================================
-#      http://www.gnu.org/software/autoconf-archive/ax_gcc_builtin.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_GCC_BUILTIN(BUILTIN)
-#
-# DESCRIPTION
-#
-#   This macro checks if the compiler supports one of GCC's built-in
-#   functions; many other compilers also provide those same built-ins.
-#
-#   The BUILTIN parameter is the name of the built-in function.
-#
-#   If BUILTIN is supported define HAVE_<BUILTIN>. Keep in mind that since
-#   builtins usually start with two underscores they will be copied over
-#   into the HAVE_<BUILTIN> definition (e.g. HAVE___BUILTIN_EXPECT for
-#   __builtin_expect()).
-#
-#   The macro caches its result in the ax_cv_have_<BUILTIN> variable (e.g.
-#   ax_cv_have___builtin_expect).
-#
-#   The macro currently supports the following built-in functions:
-#
-#    __builtin_assume_aligned
-#    __builtin_bswap16
-#    __builtin_bswap32
-#    __builtin_bswap64
-#    __builtin_choose_expr
-#    __builtin___clear_cache
-#    __builtin_clrsb
-#    __builtin_clrsbl
-#    __builtin_clrsbll
-#    __builtin_clz
-#    __builtin_clzl
-#    __builtin_clzll
-#    __builtin_complex
-#    __builtin_constant_p
-#    __builtin_ctz
-#    __builtin_ctzl
-#    __builtin_ctzll
-#    __builtin_expect
-#    __builtin_ffs
-#    __builtin_ffsl
-#    __builtin_ffsll
-#    __builtin_fpclassify
-#    __builtin_huge_val
-#    __builtin_huge_valf
-#    __builtin_huge_vall
-#    __builtin_inf
-#    __builtin_infd128
-#    __builtin_infd32
-#    __builtin_infd64
-#    __builtin_inff
-#    __builtin_infl
-#    __builtin_isinf_sign
-#    __builtin_nan
-#    __builtin_nand128
-#    __builtin_nand32
-#    __builtin_nand64
-#    __builtin_nanf
-#    __builtin_nanl
-#    __builtin_nans
-#    __builtin_nansf
-#    __builtin_nansl
-#    __builtin_object_size
-#    __builtin_parity
-#    __builtin_parityl
-#    __builtin_parityll
-#    __builtin_popcount
-#    __builtin_popcountl
-#    __builtin_popcountll
-#    __builtin_powi
-#    __builtin_powif
-#    __builtin_powil
-#    __builtin_prefetch
-#    __builtin_trap
-#    __builtin_types_compatible_p
-#    __builtin_unreachable
-#
-#   Unsuppored built-ins will be tested with an empty parameter set and the
-#   result of the check might be wrong or meaningless so use with care.
-#
-# LICENSE
-#
-#   Copyright (c) 2013 Gabriele Svelto <gabriele.svelto@gmail.com>
-#
-#   Copying and distribution of this file, with or without modification, are
-#   permitted in any medium without royalty provided the copyright notice
-#   and this notice are preserved.  This file is offered as-is, without any
-#   warranty.
-
-#serial 3
-
-AC_DEFUN([AX_GCC_BUILTIN], [
-    AS_VAR_PUSHDEF([ac_var], [ax_cv_have_$1])
-
-    AC_CACHE_CHECK([for $1], [ac_var], [
-        AC_LINK_IFELSE([AC_LANG_PROGRAM([], [
-            m4_case([$1],
-                [__builtin_assume_aligned], [$1("", 0)],
-                [__builtin_bswap16], [$1(0)],
-                [__builtin_bswap32], [$1(0)],
-                [__builtin_bswap64], [$1(0)],
-                [__builtin_choose_expr], [$1(0, 0, 0)],
-                [__builtin___clear_cache], [$1("", "")],
-                [__builtin_clrsb], [$1(0)],
-                [__builtin_clrsbl], [$1(0)],
-                [__builtin_clrsbll], [$1(0)],
-                [__builtin_clz], [$1(0)],
-                [__builtin_clzl], [$1(0)],
-                [__builtin_clzll], [$1(0)],
-                [__builtin_complex], [$1(0.0, 0.0)],
-                [__builtin_constant_p], [$1(0)],
-                [__builtin_ctz], [$1(0)],
-                [__builtin_ctzl], [$1(0)],
-                [__builtin_ctzll], [$1(0)],
-                [__builtin_expect], [$1(0, 0)],
-                [__builtin_ffs], [$1(0)],
-                [__builtin_ffsl], [$1(0)],
-                [__builtin_ffsll], [$1(0)],
-                [__builtin_fpclassify], [$1(0, 1, 2, 3, 4, 0.0)],
-                [__builtin_huge_val], [$1()],
-                [__builtin_huge_valf], [$1()],
-                [__builtin_huge_vall], [$1()],
-                [__builtin_inf], [$1()],
-                [__builtin_infd128], [$1()],
-                [__builtin_infd32], [$1()],
-                [__builtin_infd64], [$1()],
-                [__builtin_inff], [$1()],
-                [__builtin_infl], [$1()],
-                [__builtin_isinf_sign], [$1(0.0)],
-                [__builtin_nan], [$1("")],
-                [__builtin_nand128], [$1("")],
-                [__builtin_nand32], [$1("")],
-                [__builtin_nand64], [$1("")],
-                [__builtin_nanf], [$1("")],
-                [__builtin_nanl], [$1("")],
-                [__builtin_nans], [$1("")],
-                [__builtin_nansf], [$1("")],
-                [__builtin_nansl], [$1("")],
-                [__builtin_object_size], [$1("", 0)],
-                [__builtin_parity], [$1(0)],
-                [__builtin_parityl], [$1(0)],
-                [__builtin_parityll], [$1(0)],
-                [__builtin_popcount], [$1(0)],
-                [__builtin_popcountl], [$1(0)],
-                [__builtin_popcountll], [$1(0)],
-                [__builtin_powi], [$1(0, 0)],
-                [__builtin_powif], [$1(0, 0)],
-                [__builtin_powil], [$1(0, 0)],
-                [__builtin_prefetch], [$1("")],
-                [__builtin_trap], [$1()],
-                [__builtin_types_compatible_p], [$1(int, int)],
-                [__builtin_unreachable], [$1()],
-                [m4_warn([syntax], [Unsupported built-in $1, the test may fail])
-                 $1()]
-            )
-            ])],
-            [AS_VAR_SET([ac_var], [yes])],
-            [AS_VAR_SET([ac_var], [no])])
-    ])
-
-    AS_IF([test yes = AS_VAR_GET([ac_var])],
-        [AC_DEFINE_UNQUOTED(AS_TR_CPP(HAVE_$1), 1,
-            [Define to 1 if the system has the `$1' built-in function])], [])
-
-    AS_VAR_POPDEF([ac_var])
-])

aclocal.m4

@@ -536,5 +536,4 @@ AC_DEFUN([AM_RUN_LOG],
    echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    (exit $ac_status); }])
 
-
 m4_include([acinclude.m4])

conf/Makefile.in

@@ -32,8 +32,8 @@ include $(top_builddir)/make.tmpl
 .PHONY: install_conf install_localconf install_profiles
 
 generate:
-	LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withgeneralpreamble --withcomments --ignorelocal --withspaces > example.conf.in
-	LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withlocalpreamble --withcomments --withspaces local > lvmlocal.conf.in
+	(cat $(top_srcdir)/conf/example.conf.base && LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withcomments --ignorelocal --withspaces) > example.conf.in
+	(cat $(top_srcdir)/conf/lvmlocal.conf.base && LD_LIBRARY_PATH=$(top_builddir)/libdm:$(LD_LIBRARY_PATH) $(top_builddir)/tools/lvm dumpconfig --type default --unconfigured --withcomments --withspaces local) > lvmlocal.conf.in
 
 install_conf: $(CONFSRC)
 	@if [ ! -e $(confdir)/$(CONFDEST) ]; then \
@@ -48,8 +48,8 @@ install_localconf: $(CONFLOCAL)
 	fi
 
 install_profiles: $(PROFILES)
-	$(INSTALL_DIR) $(profiledir)
-	$(INSTALL_DATA) $(PROFILES) $(profiledir)/
+	$(INSTALL_DIR) $(DESTDIR)$(DEFAULT_PROFILE_DIR)
+	$(INSTALL_DATA) $(PROFILES) $(DESTDIR)$(DEFAULT_PROFILE_DIR)/
 
 install_lvm2: install_conf install_localconf install_profiles
 

conf/cache-smq.profile

@@ -9,6 +9,6 @@ allocation {
 	cache_mode = "writethrough"
 	cache_policy = "smq"
 	cache_settings {
-	        # currently no settings for "smq" policy
+	        # currently no settins for "smq" policy
 	}
 }

conf/example.conf.base

@@ -0,0 +1,23 @@
+# This is an example configuration file for the LVM2 system.
+# It contains the default settings that would be used if there was no
+# @DEFAULT_SYS_DIR@/lvm.conf file.
+#
+# Refer to 'man lvm.conf' for further information including the file layout.
+#
+# Refer to 'man lvm.conf' for information about how settings configured in
+# this file are combined with built-in values and command line options to
+# arrive at the final values used by LVM.
+#
+# Refer to 'man lvmconfig' for information about displaying the built-in
+# and configured values used by LVM.
+#
+# If a default value is set in this file (not commented out), then a
+# new version of LVM using this file will continue using that value,
+# even if the new version of LVM changes the built-in default value.
+#
+# To put this file in a different directory and override @DEFAULT_SYS_DIR@ set
+# the environment variable LVM_SYSTEM_DIR before running the tools.
+#
+# N.B. Take care that each setting only appears once if uncommenting
+# example settings in this file.
+

conf/example.conf.in

@@ -379,9 +379,8 @@ allocation {
 
 	# Configuration option allocation/raid_stripe_all_devices.
 	# Stripe across all PVs when RAID stripes are not specified.
-	# If enabled, all PVs in the VG or on the command line are used for
-	# raid0/4/5/6/10 when the command does not specify the number of
-	# stripes to use.
+	# If enabled, all PVs in the VG or on the command line are used for raid0/4/5/6/10
+	# when the command does not specify the number of stripes to use.
 	# This was the default behaviour until release 2.02.162.
 	# This configuration option has an automatic default value.
 	# raid_stripe_all_devices = 0
@@ -390,17 +389,6 @@ allocation {
 	# Cache pool metadata and data will always use different PVs.
 	cache_pool_metadata_require_separate_pvs = 0
 
-	# Configuration option allocation/cache_metadata_format.
-	# Sets default metadata format for new cache.
-	# 
-	# Accepted values:
-	#   0  Automatically detected best available format
-	#   1  Original format
-	#   2  Improved 2nd. generation format
-	# 
-	# This configuration option has an automatic default value.
-	# cache_metadata_format = 0
-
 	# Configuration option allocation/cache_mode.
 	# The default cache mode used for new cache.
 	# 
@@ -417,7 +405,7 @@ allocation {
 
 	# Configuration option allocation/cache_policy.
 	# The default cache policy used for new cache volume.
-	# Since kernel 4.2 the default policy is smq (Stochastic multiqueue),
+	# Since kernel 4.2 the default policy is smq (Stochastic multique),
 	# otherwise the older mq (Multiqueue) policy is selected.
 	# This configuration option does not have a default value defined.
 
@@ -677,7 +665,7 @@ global {
 
 	# Configuration option global/units.
 	# Default value for --units argument.
-	units = "r"
+	units = "h"
 
 	# Configuration option global/si_unit_consistency.
 	# Distinguish between powers of 1024 and 1000 bytes.
@@ -940,7 +928,7 @@ global {
 	use_lvmetad = @DEFAULT_USE_LVMETAD@
 
 	# Configuration option global/lvmetad_update_wait_time.
-	# Number of seconds a command will wait for lvmetad update to finish.
+	# The number of seconds a command will wait for lvmetad update to finish.
 	# After waiting for this period, a command will not use lvmetad, and
 	# will revert to disk scanning.
 	# This configuration option has an automatic default value.
@@ -1025,7 +1013,7 @@ global {
 	# Configuration option global/cache_disabled_features.
 	# Features to not use in the cache driver.
 	# This can be helpful for testing, or to avoid using a feature that is
-	# causing problems. Features include: policy_mq, policy_smq, metadata2.
+	# causing problems. Features include: policy_mq, policy_smq.
 	# 
 	# Example
 	# cache_disabled_features = [ "policy_smq" ]
@@ -1070,12 +1058,6 @@ global {
 	# This configuration option has an automatic default value.
 	# cache_repair_options = [ "" ]
 
-	# Configuration option global/fsadm_executable.
-	# The full path to the fsadm command.
-	# LVM uses this command to help with lvresize -r operations.
-	# This configuration option has an automatic default value.
-	# fsadm_executable = "@FSADM_PATH@"
-
 	# Configuration option global/system_id_source.
 	# The method LVM uses to set the local system ID.
 	# Volume Groups can also be given a system ID (by vgcreate, vgchange,
@@ -1174,8 +1156,7 @@ activation {
 	# Configuration option activation/missing_stripe_filler.
 	# Method to fill missing stripes when activating an incomplete LV.
 	# Using 'error' will make inaccessible parts of the device return I/O
-	# errors on access. Using 'zero' will return success (and zero) on I/O
-	# You can instead use a device path, in which case,
+	# errors on access. You can instead use a device path, in which case,
 	# that device will be used in place of missing stripes. Using anything
 	# other than 'error' with mirrored or snapshotted volumes is likely to
 	# result in data corruption.
@@ -1295,10 +1276,9 @@ activation {
 
 	# Configuration option activation/raid_region_size.
 	# Size in KiB of each raid or mirror synchronization region.
-	# The clean/dirty state of data is tracked for each region.
-	# The value is rounded down to a power of two if necessary, and
-	# is ignored if it is not a multiple of the machine memory page size.
-	raid_region_size = 2048
+	# For raid or mirror segment types, this is the amount of data that is
+	# copied at once when initializing, or moved at once by pvmove.
+	raid_region_size = 512
 
 	# Configuration option activation/error_when_full.
 	# Return errors if a thin pool runs out of space.
@@ -2068,15 +2048,6 @@ dmeventd {
 	# warning is repeated when 85%, 90% and 95% of the pool is filled.
 	thin_library = "libdevmapper-event-lvm2thin.so"
 
-	# Configuration option dmeventd/thin_command.
-	# The plugin runs command with each 5% increment when thin-pool data volume
-	# or metadata volume gets above 50%.
-	# Command which starts with 'lvm ' prefix is internal lvm command.
-	# You can write your own handler to customise behaviour in more details.
-	# User handler is specified with the full path starting with '/'.
-	# This configuration option has an automatic default value.
-	# thin_command = "lvm lvextend --use-policies"
-
 	# Configuration option dmeventd/executable.
 	# The full path to the dmeventd binary.
 	# This configuration option has an automatic default value.

conf/lvmlocal.conf.base

@@ -0,0 +1,19 @@
+# This is a local configuration file template for the LVM2 system
+# which should be installed as @DEFAULT_SYS_DIR@/lvmlocal.conf .
+#
+# Refer to 'man lvm.conf' for information about the file layout.
+#
+# To put this file in a different directory and override
+# @DEFAULT_SYS_DIR@ set the environment variable LVM_SYSTEM_DIR before
+# running the tools.
+#
+# The lvmlocal.conf file is normally expected to contain only the
+# "local" section which contains settings that should not be shared or
+# repeated among different hosts.  (But if other sections are present,
+# they *will* get processed.  Settings in this file override equivalent
+# ones in lvm.conf and are in turn overridden by ones in any enabled
+# lvm_<tag>.conf files.)
+#
+# Please take care that each setting only appears once if uncommenting
+# example settings in this file and never copy this file between hosts.
+

configure

@@ -660,7 +660,7 @@ SELINUX_PC
 SELINUX_LIBS
 REPLICATORS
 READLINE_LIBS
-RT_LIBS
+RT_LIB
 RAID
 PYTHON3DIR
 PYTHON2DIR
@@ -699,11 +699,11 @@ HAVE_VALGRIND
 HAVE_REALTIME
 HAVE_LIBDL
 BLKDEACTIVATE
-FSADM_PATH
 FSADM
 ELDFLAGS
 DM_LIB_PATCHLEVEL
 DMEVENTD_PATH
+DMEVENTD
 DL_LIBS
 DEVMAPPER
 DEFAULT_USE_LVMLOCKD
@@ -736,7 +736,7 @@ CLDWHOLEARCHIVE
 CLDNOWHOLEARCHIVE
 CLDFLAGS
 CACHE
-BUILD_DMFILEMAPD
+BUILD_NOTIFYDBUS
 BUILD_LOCKDDLM
 BUILD_LOCKDSANLOCK
 BUILD_LVMLOCKD
@@ -819,14 +819,11 @@ THIN_CHECK_CMD
 HAVE_FULL_RELRO
 HAVE_PIE
 POW_LIB
-ALLOCA
 LIBOBJS
-SORT
-WC
+ALLOCA
 CHMOD
 CSCOPE_CMD
 CFLOW_CMD
-AR
 RANLIB
 MKDIR_P
 SET_MAKE
@@ -953,15 +950,14 @@ enable_valgrind_pool
 enable_devmapper
 enable_lvmetad
 enable_lvmpolld
-enable_lvmlockd_sanlock
-enable_lvmlockd_dlm
+enable_lockd_sanlock
+enable_lockd_dlm
 enable_use_lvmlockd
 with_lvmlockd_pidfile
 enable_use_lvmetad
 with_lvmetad_pidfile
 enable_use_lvmpolld
 with_lvmpolld_pidfile
-enable_dmfilemapd
 enable_notify_dbus
 enable_blkid_wiping
 enable_udev_systemd_background_jobs
@@ -1691,13 +1687,11 @@ Optional Features:
   --disable-devmapper     disable LVM2 device-mapper interaction
   --enable-lvmetad        enable the LVM Metadata Daemon
   --enable-lvmpolld       enable the LVM Polling Daemon
-  --enable-lvmlockd-sanlock
-                          enable the LVM lock daemon using sanlock
-  --enable-lvmlockd-dlm   enable the LVM lock daemon using dlm
+  --enable-lockd-sanlock  enable the LVM lock daemon using sanlock
+  --enable-lockd-dlm      enable the LVM lock daemon using dlm
   --disable-use-lvmlockd  disable usage of LVM lock daemon
   --disable-use-lvmetad   disable usage of LVM Metadata Daemon
   --disable-use-lvmpolld  disable usage of LVM Poll Daemon
-  --enable-dmfilemapd     enable the dmstats filemap daemon
   --enable-notify-dbus    enable LVM notification using dbus
   --disable-blkid_wiping  disable libblkid detection of signatures when wiping
                           and use native code instead
@@ -3015,7 +3009,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-CONFIGURE_LINE="$0 $@"
 
 ac_config_headers="$ac_config_headers include/configure.h"
 
@@ -3169,7 +3162,6 @@ fi
 case "$host_os" in
 	linux*)
 		CLDFLAGS="$CLDFLAGS -Wl,--version-script,.export.sym"
-		# equivalent to -rdynamic
 		ELDFLAGS="-Wl,--export-dynamic"
 		# FIXME Generate list and use --dynamic-list=.dlopen.sym
 		CLDWHOLEARCHIVE="-Wl,-whole-archive"
@@ -4948,98 +4940,6 @@ else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
 
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}cflow", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cflow; ac_word=$2
@@ -5334,202 +5234,6 @@ else
   CHMOD="$ac_cv_path_CHMOD"
 fi
 
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}wc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}wc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_WC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $WC in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_WC="$WC" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-WC=$ac_cv_path_WC
-if test -n "$WC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5
-$as_echo "$WC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_WC"; then
-  ac_pt_WC=$WC
-  # Extract the first word of "wc", so it can be a program name with args.
-set dummy wc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_WC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ac_pt_WC in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ac_pt_WC="$ac_pt_WC" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_ac_pt_WC="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-ac_pt_WC=$ac_cv_path_ac_pt_WC
-if test -n "$ac_pt_WC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_WC" >&5
-$as_echo "$ac_pt_WC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_pt_WC" = x; then
-    WC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    WC=$ac_pt_WC
-  fi
-else
-  WC="$ac_cv_path_WC"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}sort", so it can be a program name with args.
-set dummy ${ac_tool_prefix}sort; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_SORT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $SORT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-SORT=$ac_cv_path_SORT
-if test -n "$SORT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5
-$as_echo "$SORT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_SORT"; then
-  ac_pt_SORT=$SORT
-  # Extract the first word of "sort", so it can be a program name with args.
-set dummy sort; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_SORT+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ac_pt_SORT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ac_pt_SORT="$ac_pt_SORT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_ac_pt_SORT="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-ac_pt_SORT=$ac_cv_path_ac_pt_SORT
-if test -n "$ac_pt_SORT"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_SORT" >&5
-$as_echo "$ac_pt_SORT" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_pt_SORT" = x; then
-    SORT=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    SORT=$ac_pt_SORT
-  fi
-else
-  SORT="$ac_cv_path_SORT"
-fi
-
 
 ################################################################################
 ac_header_dirent=no
@@ -6172,7 +5876,7 @@ fi
 done
 
 
-for ac_header in termios.h sys/statvfs.h sys/timerfd.h sys/vfs.h linux/magic.h linux/fiemap.h
+for ac_header in termios.h sys/statvfs.h sys/timerfd.h linux/magic.h linux/fiemap.h
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
@@ -6365,26 +6069,6 @@ _ACEOF
 
 fi
 
-ac_fn_c_check_member "$LINENO" "struct stat" "st_blocks" "ac_cv_member_struct_stat_st_blocks" "$ac_includes_default"
-if test "x$ac_cv_member_struct_stat_st_blocks" = xyes; then :
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_STAT_ST_BLOCKS 1
-_ACEOF
-
-
-$as_echo "#define HAVE_ST_BLOCKS 1" >>confdefs.h
-
-else
-  case " $LIBOBJS " in
-  *" fileblocks.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS fileblocks.$ac_objext"
- ;;
-esac
-
-fi
-
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
 if ${ac_cv_struct_tm+:} false; then :
@@ -6637,50 +6321,6 @@ _ACEOF
   esac
 
 
-
-
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __builtin_clz" >&5
-$as_echo_n "checking for __builtin_clz... " >&6; }
-if ${ax_cv_have___builtin_clz+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-            __builtin_clz(0)
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ax_cv_have___builtin_clz=yes
-else
-  ax_cv_have___builtin_clz=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_have___builtin_clz" >&5
-$as_echo "$ax_cv_have___builtin_clz" >&6; }
-
-    if test yes = $ax_cv_have___builtin_clz; then :
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE___BUILTIN_CLZ 1
-_ACEOF
-
-fi
-
-
-
-
 ################################################################################
 for ac_func in ftruncate gethostname getpagesize gettimeofday localtime_r \
   memchr memset mkdir mkfifo munmap nl_langinfo realpath rmdir setenv \
@@ -9349,11 +8989,6 @@ $as_echo "$as_me: WARNING: $CACHE_CHECK_CMD: Old version \"$CACHE_CHECK_VSN\" fo
 				CACHE_CHECK_VERSION_WARN=y
 				CACHE_CHECK_NEEDS_CHECK=no
 			fi
-			if test "$CACHE_CHECK_VSN_MINOR" -lt 7 ; then
-				{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $CACHE_CHECK_CMD: Old version \"$CACHE_CHECK_VSN\" does not support new cache format V2" >&5
-$as_echo "$as_me: WARNING: $CACHE_CHECK_CMD: Old version \"$CACHE_CHECK_VSN\" does not support new cache format V2" >&2;}
-				CACHE_CHECK_VERSION_WARN=y
-			fi
 		fi
 	fi
 	# Empty means a config way to ignore cache dumping
@@ -9716,6 +9351,8 @@ _ACEOF
 
 
 ################################################################################
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable readline" >&5
+$as_echo_n "checking whether to enable readline... " >&6; }
 # Check whether --enable-readline was given.
 if test "${enable_readline+set}" = set; then :
   enableval=$enable_readline; READLINE=$enableval
@@ -9723,6 +9360,8 @@ else
   READLINE=maybe
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINE" >&5
+$as_echo "$READLINE" >&6; }
 
 ################################################################################
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable realtime support" >&5
@@ -11867,11 +11506,11 @@ $as_echo "$BUILD_LVMPOLLD" >&6; }
 ################################################################################
 BUILD_LVMLOCKD=no
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lvmlockdsanlock" >&5
-$as_echo_n "checking whether to build lvmlockdsanlock... " >&6; }
-# Check whether --enable-lvmlockd-sanlock was given.
-if test "${enable_lvmlockd_sanlock+set}" = set; then :
-  enableval=$enable_lvmlockd_sanlock; LOCKDSANLOCK=$enableval
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lockdsanlock" >&5
+$as_echo_n "checking whether to build lockdsanlock... " >&6; }
+# Check whether --enable-lockd-sanlock was given.
+if test "${enable_lockd_sanlock+set}" = set; then :
+  enableval=$enable_lockd_sanlock; LOCKDSANLOCK=$enableval
 fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LOCKDSANLOCK" >&5
@@ -11958,11 +11597,11 @@ $as_echo "#define LOCKDSANLOCK_SUPPORT 1" >>confdefs.h
 fi
 
 ################################################################################
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lvmlockddlm" >&5
-$as_echo_n "checking whether to build lvmlockddlm... " >&6; }
-# Check whether --enable-lvmlockd-dlm was given.
-if test "${enable_lvmlockd_dlm+set}" = set; then :
-  enableval=$enable_lvmlockd_dlm; LOCKDDLM=$enableval
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build lockddlm" >&5
+$as_echo_n "checking whether to build lockddlm... " >&6; }
+# Check whether --enable-lockd-dlm was given.
+if test "${enable_lockd_dlm+set}" = set; then :
+  enableval=$enable_lockd_dlm; LOCKDDLM=$enableval
 fi
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LOCKDDLM" >&5
@@ -12193,55 +11832,28 @@ cat >>confdefs.h <<_ACEOF
 _ACEOF
 
 
-################################################################################
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build dmfilemapd" >&5
-$as_echo_n "checking whether to build dmfilemapd... " >&6; }
-# Check whether --enable-dmfilemapd was given.
-if test "${enable_dmfilemapd+set}" = set; then :
-  enableval=$enable_dmfilemapd; BUILD_DMFILEMAPD=$enableval
-else
-  BUILD_DMFILEMAPD=no
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_DMFILEMAPD" >&5
-$as_echo "$BUILD_DMFILEMAPD" >&6; }
-
-$as_echo "#define DMFILEMAPD \$BUILD_DMFILEMAPD" >>confdefs.h
-
-
-if test "$BUILD_DMFILEMAPD" = yes; then
-   ac_fn_c_check_header_mongrel "$LINENO" "linux/fiemap.h" "ac_cv_header_linux_fiemap_h" "$ac_includes_default"
-if test "x$ac_cv_header_linux_fiemap_h" = xyes; then :
-
-else
-  as_fn_error $? "--enable-dmfilemapd requires fiemap.h" "$LINENO" 5
-fi
-
-
-fi
-
 ################################################################################
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build notifydbus" >&5
 $as_echo_n "checking whether to build notifydbus... " >&6; }
 # Check whether --enable-notify-dbus was given.
 if test "${enable_notify_dbus+set}" = set; then :
-  enableval=$enable_notify_dbus; NOTIFYDBUS_SUPPORT=$enableval
-else
-  NOTIFYDBUS_SUPPORT=no
+  enableval=$enable_notify_dbus; NOTIFYDBUS=$enableval
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $NOTIFYDBUS_SUPPORT" >&5
-$as_echo "$NOTIFYDBUS_SUPPORT" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $NOTIFYDBUS" >&5
+$as_echo "$NOTIFYDBUS" >&6; }
 
-if test "$NOTIFYDBUS_SUPPORT" = yes; then
+BUILD_NOTIFYDBUS=$NOTIFYDBUS
+
+if test "$BUILD_NOTIFYDBUS" = yes; then
 
 $as_echo "#define NOTIFYDBUS_SUPPORT 1" >>confdefs.h
 
-	SYSTEMD_LIBS="-lsystemd"
+	LIBS="-lsystemd $LIBS"
 fi
 
 ################################################################################
-if test "$NOTIFYDBUS_SUPPORT" = yes; then
+if test "$BUILD_NOTIFYDBUS" = yes; then
 
 pkg_failed=no
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NOTIFY_DBUS" >&5
@@ -12317,6 +11929,8 @@ fi
 
 ################################################################################
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable libblkid detection of signatures when wiping" >&5
+$as_echo_n "checking whether to enable libblkid detection of signatures when wiping... " >&6; }
 # Check whether --enable-blkid_wiping was given.
 if test "${enable_blkid_wiping+set}" = set; then :
   enableval=$enable_blkid_wiping; BLKID_WIPING=$enableval
@@ -12324,8 +11938,9 @@ else
   BLKID_WIPING=maybe
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BLKID_WIPING" >&5
+$as_echo "$BLKID_WIPING" >&6; }
 
-DEFAULT_USE_BLKID_WIPING=0
 if test "$BLKID_WIPING" != no; then
 	pkg_config_init
 
@@ -12405,19 +12020,20 @@ else
 	BLKID_LIBS=$pkg_cv_BLKID_LIBS
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
-	 BLKID_WIPING=yes
-			    BLKID_PC="blkid"
-			    DEFAULT_USE_BLKID_WIPING=1
+	test "$BLKID_WIPING" = maybe && BLKID_WIPING=yes
+fi
+	if test "$BLKID_WIPING" = yes; then
+		BLKID_PC="blkid"
+		DEFAULT_USE_BLKID_WIPING=1
 
 $as_echo "#define BLKID_WIPING_SUPPORT 1" >>confdefs.h
 
-
+	else
+		DEFAULT_USE_BLKID_WIPING=0
+	fi
+else
+	DEFAULT_USE_BLKID_WIPING=0
 fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable libblkid detection of signatures when wiping" >&5
-$as_echo_n "checking whether to enable libblkid detection of signatures when wiping... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BLKID_WIPING" >&5
-$as_echo "$BLKID_WIPING" >&6; }
 
 cat >>confdefs.h <<_ACEOF
 #define DEFAULT_USE_BLKID_WIPING $DEFAULT_USE_BLKID_WIPING
@@ -12425,6 +12041,8 @@ _ACEOF
 
 
 ################################################################################
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use udev-systemd protocol for jobs in background" >&5
+$as_echo_n "checking whether to use udev-systemd protocol for jobs in background... " >&6; }
 # Check whether --enable-udev-systemd-background-jobs was given.
 if test "${enable_udev_systemd_background_jobs+set}" = set; then :
   enableval=$enable_udev_systemd_background_jobs; UDEV_SYSTEMD_BACKGROUND_JOBS=$enableval
@@ -12432,6 +12050,8 @@ else
   UDEV_SYSTEMD_BACKGROUND_JOBS=maybe
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $UDEV_SYSTEMD_BACKGROUND_JOBS" >&5
+$as_echo "$UDEV_SYSTEMD_BACKGROUND_JOBS" >&6; }
 
 if test "$UDEV_SYSTEMD_BACKGROUND_JOBS" != no; then
 	pkg_config_init
@@ -12512,15 +12132,10 @@ else
 	SYSTEMD_LIBS=$pkg_cv_SYSTEMD_LIBS
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
-	UDEV_SYSTEMD_BACKGROUND_JOBS=yes
+	test "$UDEV_SYSTEMD_BACKGROUND_JOBS" = maybe && UDEV_SYSTEMD_BACKGROUND_JOBS=yes
 fi
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use udev-systemd protocol for jobs in background" >&5
-$as_echo_n "checking whether to use udev-systemd protocol for jobs in background... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $UDEV_SYSTEMD_BACKGROUND_JOBS" >&5
-$as_echo "$UDEV_SYSTEMD_BACKGROUND_JOBS" >&6; }
-
 ################################################################################
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable synchronisation with udev processing" >&5
 $as_echo_n "checking whether to enable synchronisation with udev processing... " >&6; }
@@ -13916,15 +13531,15 @@ $as_echo "$BLKDEACTIVATE" >&6; }
 $as_echo_n "checking whether to use dmeventd... " >&6; }
 # Check whether --enable-dmeventd was given.
 if test "${enable_dmeventd+set}" = set; then :
-  enableval=$enable_dmeventd; BUILD_DMEVENTD=$enableval
-else
-  BUILD_DMEVENTD=no
+  enableval=$enable_dmeventd; DMEVENTD=$enableval
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_DMEVENTD" >&5
-$as_echo "$BUILD_DMEVENTD" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DMEVENTD" >&5
+$as_echo "$DMEVENTD" >&6; }
 
-if test "$BUILD_DMEVENTD" = yes; then
+BUILD_DMEVENTD=$DMEVENTD
+
+if test "$DMEVENTD" = yes; then
    if test "$MIRRORS" != internal; then
       as_fn_error $? "--enable-dmeventd currently requires --with-mirrors=internal" "$LINENO" 5
    fi
@@ -14315,24 +13930,8 @@ fi
 fi
 
 ################################################################################
-RT_LIBS=
-HAVE_REALTIME=no
 if test "$REALTIME" = yes; then
-	for ac_func in clock_gettime
-do :
-  ac_fn_c_check_func "$LINENO" "clock_gettime" "ac_cv_func_clock_gettime"
-if test "x$ac_cv_func_clock_gettime" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_CLOCK_GETTIME 1
-_ACEOF
- HAVE_REALTIME=yes
-fi
-done
-
-
-	if test "$HAVE_REALTIME" != yes; then :
-   # try again with -lrt
-	      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5
 $as_echo_n "checking for clock_gettime in -lrt... " >&6; }
 if ${ac_cv_lib_rt_clock_gettime+:} false; then :
   $as_echo_n "(cached) " >&6
@@ -14369,15 +13968,18 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5
 $as_echo "$ac_cv_lib_rt_clock_gettime" >&6; }
 if test "x$ac_cv_lib_rt_clock_gettime" = xyes; then :
-  RT_LIBS="-lrt"; HAVE_REALTIME=yes
+  HAVE_REALTIME=yes
+else
+  HAVE_REALTIME=no
 fi
 
-fi
 
 	if test "$HAVE_REALTIME" = yes; then
 
 $as_echo "#define HAVE_REALTIME 1" >>confdefs.h
 
+		LIBS="-lrt $LIBS"
+		RT_LIB="-lrt"
 	else
 		{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling realtime clock" >&5
 $as_echo "$as_me: WARNING: Disabling realtime clock" >&2;}
@@ -14546,8 +14148,7 @@ if test "x$ac_cv_lib_readline_readline" = xyes; then :
 
 $as_echo "#define READLINE_SUPPORT 1" >>confdefs.h
 
-				READLINE=yes
-		LIBS=$lvm_saved_libs
+				LIBS=$lvm_saved_libs
 		{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for rl_line_buffer in -lreadline" >&5
 $as_echo_n "checking for rl_line_buffer in -lreadline... " >&6; }
 if ${ac_cv_lib_readline_rl_line_buffer+:} false; then :
@@ -14867,10 +14468,6 @@ fi
 done
 
 fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable readline" >&5
-$as_echo_n "checking whether to enable readline... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINE" >&5
-$as_echo "$READLINE" >&6; }
 
 if test "$BUILD_CMIRRORD" = yes; then
 	for ac_func in atexit
@@ -14889,15 +14486,13 @@ done
 fi
 
 if test "$BUILD_LVMLOCKD" = yes; then
-	if test "$HAVE_REALTIME" != yes; then :
-  as_fn_error $? "Realtime clock support is mandatory for lvmlockd." "$LINENO" 5
-fi
-	for ac_func in strtoull
+	for ac_func in clock_gettime strtoull
 do :
-  ac_fn_c_check_func "$LINENO" "strtoull" "ac_cv_func_strtoull"
-if test "x$ac_cv_func_strtoull" = xyes; then :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
-#define HAVE_STRTOULL 1
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
 
 else
@@ -15217,7 +14812,7 @@ done
 
 fi
 
-if test "$BUILD_DMEVENTD" = yes; then
+if test "$DMEVENTD" = yes; then
 	for ac_header in arpa/inet.h
 do :
   ac_fn_c_check_header_mongrel "$LINENO" "arpa/inet.h" "ac_cv_header_arpa_inet_h" "$ac_includes_default"
@@ -15286,23 +14881,6 @@ done
 
 fi
 
-if test "$BUILD_DMFILEMAPD" = yes; then
-	for ac_header in sys/inotify.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "sys/inotify.h" "ac_cv_header_sys_inotify_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_inotify_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_SYS_INOTIFY_H 1
-_ACEOF
-
-else
-  hard_bailout
-fi
-
-done
-
-fi
-
 ################################################################################
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}modprobe", so it can be a program name with args.
@@ -15431,14 +15009,6 @@ cat >>confdefs.h <<_ACEOF
 _ACEOF
 
 
-
-FSADM_PATH="$lvm_exec_prefix/sbin/fsadm"
-
-cat >>confdefs.h <<_ACEOF
-#define FSADM_PATH "$FSADM_PATH"
-_ACEOF
-
-
 ################################################################################
 if test "$BUILD_DMEVENTD" = yes; then
 
@@ -15614,12 +15184,6 @@ LVM_MINOR=`echo "$VER" | $AWK -F '.' '{print $2}'`
 LVM_PATCHLEVEL=`echo "$VER" | $AWK -F '[(.]' '{print $3}'`
 LVM_LIBAPI=`echo "$VER" | $AWK -F '[()]' '{print $2}'`
 
-
-cat >>confdefs.h <<_ACEOF
-#define LVM_CONFIGURE_LINE "$CONFIGURE_LINE"
-_ACEOF
-
-
 ################################################################################
 
 
@@ -15777,11 +15341,10 @@ _ACEOF
 
 
 
-
 
 
 ################################################################################
-ac_config_files="$ac_config_files Makefile make.tmpl daemons/Makefile daemons/clvmd/Makefile daemons/cmirrord/Makefile daemons/dmeventd/Makefile daemons/dmeventd/libdevmapper-event.pc daemons/dmeventd/plugins/Makefile daemons/dmeventd/plugins/lvm2/Makefile daemons/dmeventd/plugins/raid/Makefile daemons/dmeventd/plugins/mirror/Makefile daemons/dmeventd/plugins/snapshot/Makefile daemons/dmeventd/plugins/thin/Makefile daemons/dmfilemapd/Makefile daemons/lvmdbusd/Makefile daemons/lvmdbusd/path.py daemons/lvmetad/Makefile daemons/lvmpolld/Makefile daemons/lvmlockd/Makefile conf/Makefile conf/example.conf conf/lvmlocal.conf conf/command_profile_template.profile conf/metadata_profile_template.profile include/.symlinks include/Makefile lib/Makefile lib/format1/Makefile lib/format_pool/Makefile lib/locking/Makefile lib/mirror/Makefile lib/replicator/Makefile include/lvm-version.h lib/raid/Makefile lib/snapshot/Makefile lib/thin/Makefile lib/cache_segtype/Makefile libdaemon/Makefile libdaemon/client/Makefile libdaemon/server/Makefile libdm/Makefile libdm/libdevmapper.pc liblvm/Makefile liblvm/liblvm2app.pc man/Makefile po/Makefile python/Makefile python/setup.py scripts/blkdeactivate.sh scripts/blk_availability_init_red_hat scripts/blk_availability_systemd_red_hat.service scripts/clvmd_init_red_hat scripts/cmirrord_init_red_hat scripts/com.redhat.lvmdbus1.service scripts/dm_event_systemd_red_hat.service scripts/dm_event_systemd_red_hat.socket scripts/lvm2_cluster_activation_red_hat.sh scripts/lvm2_cluster_activation_systemd_red_hat.service scripts/lvm2_clvmd_systemd_red_hat.service scripts/lvm2_cmirrord_systemd_red_hat.service scripts/lvm2_lvmdbusd_systemd_red_hat.service scripts/lvm2_lvmetad_init_red_hat scripts/lvm2_lvmetad_systemd_red_hat.service scripts/lvm2_lvmetad_systemd_red_hat.socket scripts/lvm2_lvmpolld_init_red_hat scripts/lvm2_lvmpolld_systemd_red_hat.service scripts/lvm2_lvmpolld_systemd_red_hat.socket scripts/lvm2_lvmlockd_systemd_red_hat.service scripts/lvm2_lvmlocking_systemd_red_hat.service scripts/lvm2_monitoring_init_red_hat scripts/lvm2_monitoring_systemd_red_hat.service scripts/lvm2_pvscan_systemd_red_hat@.service scripts/lvm2_tmpfiles_red_hat.conf scripts/lvmdump.sh scripts/Makefile test/Makefile test/api/Makefile test/unit/Makefile tools/Makefile udev/Makefile unit-tests/datastruct/Makefile unit-tests/regex/Makefile unit-tests/mm/Makefile"
+ac_config_files="$ac_config_files Makefile make.tmpl daemons/Makefile daemons/clvmd/Makefile daemons/cmirrord/Makefile daemons/dmeventd/Makefile daemons/dmeventd/libdevmapper-event.pc daemons/dmeventd/plugins/Makefile daemons/dmeventd/plugins/lvm2/Makefile daemons/dmeventd/plugins/raid/Makefile daemons/dmeventd/plugins/mirror/Makefile daemons/dmeventd/plugins/snapshot/Makefile daemons/dmeventd/plugins/thin/Makefile daemons/lvmdbusd/Makefile daemons/lvmdbusd/path.py daemons/lvmetad/Makefile daemons/lvmpolld/Makefile daemons/lvmlockd/Makefile conf/Makefile conf/example.conf conf/lvmlocal.conf conf/command_profile_template.profile conf/metadata_profile_template.profile include/.symlinks include/Makefile lib/Makefile lib/format1/Makefile lib/format_pool/Makefile lib/locking/Makefile lib/mirror/Makefile lib/replicator/Makefile include/lvm-version.h lib/raid/Makefile lib/snapshot/Makefile lib/thin/Makefile lib/cache_segtype/Makefile libdaemon/Makefile libdaemon/client/Makefile libdaemon/server/Makefile libdm/Makefile libdm/libdevmapper.pc liblvm/Makefile liblvm/liblvm2app.pc man/Makefile po/Makefile python/Makefile python/setup.py scripts/blkdeactivate.sh scripts/blk_availability_init_red_hat scripts/blk_availability_systemd_red_hat.service scripts/clvmd_init_red_hat scripts/cmirrord_init_red_hat scripts/com.redhat.lvmdbus1.service scripts/dm_event_systemd_red_hat.service scripts/dm_event_systemd_red_hat.socket scripts/lvm2_cluster_activation_red_hat.sh scripts/lvm2_cluster_activation_systemd_red_hat.service scripts/lvm2_clvmd_systemd_red_hat.service scripts/lvm2_cmirrord_systemd_red_hat.service scripts/lvm2_lvmdbusd_systemd_red_hat.service scripts/lvm2_lvmetad_init_red_hat scripts/lvm2_lvmetad_systemd_red_hat.service scripts/lvm2_lvmetad_systemd_red_hat.socket scripts/lvm2_lvmpolld_init_red_hat scripts/lvm2_lvmpolld_systemd_red_hat.service scripts/lvm2_lvmpolld_systemd_red_hat.socket scripts/lvm2_lvmlockd_systemd_red_hat.service scripts/lvm2_lvmlocking_systemd_red_hat.service scripts/lvm2_monitoring_init_red_hat scripts/lvm2_monitoring_systemd_red_hat.service scripts/lvm2_pvscan_systemd_red_hat@.service scripts/lvm2_tmpfiles_red_hat.conf scripts/lvmdump.sh scripts/Makefile test/Makefile test/api/Makefile test/unit/Makefile tools/Makefile udev/Makefile unit-tests/datastruct/Makefile unit-tests/regex/Makefile unit-tests/mm/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -16489,7 +16052,6 @@ do
     "daemons/dmeventd/plugins/mirror/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/dmeventd/plugins/mirror/Makefile" ;;
     "daemons/dmeventd/plugins/snapshot/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/dmeventd/plugins/snapshot/Makefile" ;;
     "daemons/dmeventd/plugins/thin/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/dmeventd/plugins/thin/Makefile" ;;
-    "daemons/dmfilemapd/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/dmfilemapd/Makefile" ;;
     "daemons/lvmdbusd/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/lvmdbusd/Makefile" ;;
     "daemons/lvmdbusd/path.py") CONFIG_FILES="$CONFIG_FILES daemons/lvmdbusd/path.py" ;;
     "daemons/lvmetad/Makefile") CONFIG_FILES="$CONFIG_FILES daemons/lvmetad/Makefile" ;;
@@ -17158,8 +16720,8 @@ $as_echo "$as_me: WARNING: Support for thin provisioning is limited since some t
 fi
 
 if test -n "$THIN_CHECK_VERSION_WARN"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should also install latest thin_check vsn 0.7.0 (or later) for lvm2 thin provisioning" >&5
-$as_echo "$as_me: WARNING: You should also install latest thin_check vsn 0.7.0 (or later) for lvm2 thin provisioning" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning" >&5
+$as_echo "$as_me: WARNING: You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning" >&2;}
 fi
 
 if test -n "$CACHE_CONFIGURE_WARN"; then :
@@ -17167,12 +16729,6 @@ if test -n "$CACHE_CONFIGURE_WARN"; then :
 $as_echo "$as_me: WARNING: Support for cache is limited since some cache tools are missing!" >&2;}
 fi
 
-if test -n "$CACHE_CHECK_VERSION_WARN"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: You should install latest cache_check vsn 0.7.0 to use lvm2 cache metadata format 2" >&5
-$as_echo "$as_me: WARNING: You should install latest cache_check vsn 0.7.0 to use lvm2 cache metadata format 2" >&2;}
-fi
-
-
 if test "$ODIRECT" != yes; then :
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: O_DIRECT disabled: low-memory pvmove may lock up" >&5
 $as_echo "$as_me: WARNING: O_DIRECT disabled: low-memory pvmove may lock up" >&2;}

configure.in

@@ -15,7 +15,6 @@ AC_PREREQ(2.69)
 ################################################################################
 dnl -- Process this file with autoconf to produce a configure script.
 AC_INIT
-CONFIGURE_LINE="$0 $@"
 AC_CONFIG_SRCDIR([lib/device/dev-cache.h])
 AC_CONFIG_HEADERS([include/configure.h])
 
@@ -31,7 +30,6 @@ AS_IF([test -z "$CFLAGS"], [COPTIMISE_FLAG="-O2"])
 case "$host_os" in
 	linux*)
 		CLDFLAGS="$CLDFLAGS -Wl,--version-script,.export.sym"
-		# equivalent to -rdynamic
 		ELDFLAGS="-Wl,--export-dynamic"
 		# FIXME Generate list and use --dynamic-list=.dlopen.sym
 		CLDWHOLEARCHIVE="-Wl,-whole-archive"
@@ -85,12 +83,9 @@ AC_PROG_LN_S
 AC_PROG_MAKE_SET
 AC_PROG_MKDIR_P
 AC_PROG_RANLIB
-AC_CHECK_TOOL(AR, ar)
 AC_PATH_TOOL(CFLOW_CMD, cflow)
 AC_PATH_TOOL(CSCOPE_CMD, cscope)
 AC_PATH_TOOL(CHMOD, chmod)
-AC_PATH_TOOL(WC, wc)
-AC_PATH_TOOL(SORT, sort)
 
 ################################################################################
 dnl -- Check for header files.
@@ -108,7 +103,7 @@ AC_CHECK_HEADERS([assert.h ctype.h dirent.h errno.h fcntl.h float.h \
   sys/time.h sys/types.h sys/utsname.h sys/wait.h time.h \
   unistd.h], , [AC_MSG_ERROR(bailing out)])
 
-AC_CHECK_HEADERS(termios.h sys/statvfs.h sys/timerfd.h sys/vfs.h linux/magic.h linux/fiemap.h)
+AC_CHECK_HEADERS(termios.h sys/statvfs.h sys/timerfd.h linux/magic.h linux/fiemap.h)
 
 case "$host_os" in
 	linux*)
@@ -123,7 +118,6 @@ AC_C_CONST
 AC_C_INLINE
 AC_CHECK_MEMBERS([struct stat.st_rdev])
 AC_CHECK_TYPES([ptrdiff_t])
-AC_STRUCT_ST_BLOCKS
 AC_STRUCT_TM
 AC_TYPE_OFF_T
 AC_TYPE_PID_T
@@ -140,7 +134,6 @@ AC_TYPE_UINT8_T
 AC_TYPE_UINT16_T
 AC_TYPE_UINT32_T
 AC_TYPE_UINT64_T
-AX_GCC_BUILTIN([__builtin_clz])
 
 ################################################################################
 dnl -- Check for functions
@@ -619,10 +612,6 @@ case "$CACHE" in
 				CACHE_CHECK_VERSION_WARN=y
 				CACHE_CHECK_NEEDS_CHECK=no
 			fi
-			if test "$CACHE_CHECK_VSN_MINOR" -lt 7 ; then
-				AC_MSG_WARN([$CACHE_CHECK_CMD: Old version "$CACHE_CHECK_VSN" does not support new cache format V2])
-				CACHE_CHECK_VERSION_WARN=y
-			fi
 		fi
 	fi
 	# Empty means a config way to ignore cache dumping
@@ -676,9 +665,11 @@ AC_DEFINE_UNQUOTED([CACHE_RESTORE_CMD], ["$CACHE_RESTORE_CMD"],
 
 ################################################################################
 dnl -- Disable readline
+AC_MSG_CHECKING(whether to enable readline)
 AC_ARG_ENABLE([readline],
 	      AC_HELP_STRING([--disable-readline], [disable readline support]),
 	      READLINE=$enableval, READLINE=maybe)
+AC_MSG_RESULT($READLINE)
 
 ################################################################################
 dnl -- Disable realtime clock support
@@ -1154,10 +1145,10 @@ AC_MSG_RESULT($BUILD_LVMPOLLD)
 ################################################################################
 BUILD_LVMLOCKD=no
 
-dnl -- Build lvmlockdsanlock
-AC_MSG_CHECKING(whether to build lvmlockdsanlock)
-AC_ARG_ENABLE(lvmlockd-sanlock,
-	      AC_HELP_STRING([--enable-lvmlockd-sanlock],
+dnl -- Build lockdsanlock
+AC_MSG_CHECKING(whether to build lockdsanlock)
+AC_ARG_ENABLE(lockd-sanlock,
+	      AC_HELP_STRING([--enable-lockd-sanlock],
 			     [enable the LVM lock daemon using sanlock]),
 	      LOCKDSANLOCK=$enableval)
 AC_MSG_RESULT($LOCKDSANLOCK)
@@ -1172,10 +1163,10 @@ if test "$BUILD_LOCKDSANLOCK" = yes; then
 fi
 
 ################################################################################
-dnl -- Build lvmlockddlm
-AC_MSG_CHECKING(whether to build lvmlockddlm)
-AC_ARG_ENABLE(lvmlockd-dlm,
-	      AC_HELP_STRING([--enable-lvmlockd-dlm],
+dnl -- Build lockddlm
+AC_MSG_CHECKING(whether to build lockddlm)
+AC_ARG_ENABLE(lockd-dlm,
+	      AC_HELP_STRING([--enable-lockd-dlm],
 			     [enable the LVM lock daemon using dlm]),
 	      LOCKDDLM=$enableval)
 AC_MSG_RESULT($LOCKDDLM)
@@ -1277,80 +1268,75 @@ fi
 AC_DEFINE_UNQUOTED(DEFAULT_USE_LVMPOLLD, [$DEFAULT_USE_LVMPOLLD],
 		   [Use lvmpolld by default.])
 
-################################################################################
-dnl -- Check dmfilemapd
-AC_MSG_CHECKING(whether to build dmfilemapd)
-AC_ARG_ENABLE(dmfilemapd, AC_HELP_STRING([--enable-dmfilemapd],
-					 [enable the dmstats filemap daemon]),
-	      BUILD_DMFILEMAPD=$enableval, BUILD_DMFILEMAPD=no)
-AC_MSG_RESULT($BUILD_DMFILEMAPD)
-AC_DEFINE([DMFILEMAPD], $BUILD_DMFILEMAPD, [Define to 1 to enable the device-mapper filemap daemon.])
-
-dnl -- dmfilemapd requires FIEMAP
-if test "$BUILD_DMFILEMAPD" = yes; then
-   AC_CHECK_HEADER([linux/fiemap.h], , [AC_MSG_ERROR(--enable-dmfilemapd requires fiemap.h)])
-fi
-
 ################################################################################
 dnl -- Build notifydbus
 AC_MSG_CHECKING(whether to build notifydbus)
 AC_ARG_ENABLE(notify-dbus,
 	      AC_HELP_STRING([--enable-notify-dbus],
 			     [enable LVM notification using dbus]),
-	      NOTIFYDBUS_SUPPORT=$enableval, NOTIFYDBUS_SUPPORT=no)
-AC_MSG_RESULT($NOTIFYDBUS_SUPPORT)
+	      NOTIFYDBUS=$enableval)
+AC_MSG_RESULT($NOTIFYDBUS)
 
-if test "$NOTIFYDBUS_SUPPORT" = yes; then
+BUILD_NOTIFYDBUS=$NOTIFYDBUS
+
+if test "$BUILD_NOTIFYDBUS" = yes; then
 	AC_DEFINE([NOTIFYDBUS_SUPPORT], 1, [Define to 1 to include code that uses dbus notification.])
-	SYSTEMD_LIBS="-lsystemd"
+	LIBS="-lsystemd $LIBS"
 fi
 
 ################################################################################
 dnl -- Look for dbus libraries
-if test "$NOTIFYDBUS_SUPPORT" = yes; then
+if test "$BUILD_NOTIFYDBUS" = yes; then
 	PKG_CHECK_MODULES(NOTIFY_DBUS, systemd >= 221, [HAVE_NOTIFY_DBUS=yes], $bailout)
 fi
 
 ################################################################################
 
 dnl -- Enable blkid wiping functionality
+AC_MSG_CHECKING(whether to enable libblkid detection of signatures when wiping)
 AC_ARG_ENABLE(blkid_wiping,
 	      AC_HELP_STRING([--disable-blkid_wiping],
 			     [disable libblkid detection of signatures when wiping and use native code instead]),
 	      BLKID_WIPING=$enableval, BLKID_WIPING=maybe)
+AC_MSG_RESULT($BLKID_WIPING)
 
-DEFAULT_USE_BLKID_WIPING=0
 if test "$BLKID_WIPING" != no; then
 	pkg_config_init
 	PKG_CHECK_MODULES(BLKID, blkid >= 2.24,
-			  [ BLKID_WIPING=yes
-			    BLKID_PC="blkid"
-			    DEFAULT_USE_BLKID_WIPING=1
-			    AC_DEFINE([BLKID_WIPING_SUPPORT], 1, [Define to 1 to use libblkid detection of signatures when wiping.])
-			  ], [if test "$BLKID_WIPING" = maybe; then
+			  [test "$BLKID_WIPING" = maybe && BLKID_WIPING=yes],
+			  [if test "$BLKID_WIPING" = maybe; then
 				BLKID_WIPING=no
 			   else
 			        AC_MSG_ERROR([bailing out... blkid library >= 2.24 is required])
 			   fi])
+	if test "$BLKID_WIPING" = yes; then
+		BLKID_PC="blkid"
+		DEFAULT_USE_BLKID_WIPING=1
+		AC_DEFINE([BLKID_WIPING_SUPPORT], 1, [Define to 1 to use libblkid detection of signatures when wiping.])
+	else
+		DEFAULT_USE_BLKID_WIPING=0
+	fi
+else
+	DEFAULT_USE_BLKID_WIPING=0
 fi
-AC_MSG_CHECKING([whether to enable libblkid detection of signatures when wiping])
-AC_MSG_RESULT($BLKID_WIPING)
 AC_DEFINE_UNQUOTED(DEFAULT_USE_BLKID_WIPING, [$DEFAULT_USE_BLKID_WIPING],
 		   [Use blkid wiping by default.])
 
 ################################################################################
 dnl -- Enable udev-systemd protocol to instantiate a service for background jobs
 dnl -- Requires systemd version 205 at least (including support for systemd-run)
+AC_MSG_CHECKING(whether to use udev-systemd protocol for jobs in background)
 AC_ARG_ENABLE(udev-systemd-background-jobs,
 	      AC_HELP_STRING([--disable-udev-systemd-background-jobs],
 			     [disable udev-systemd protocol to instantiate a service for background job]),
 	      UDEV_SYSTEMD_BACKGROUND_JOBS=$enableval,
 	      UDEV_SYSTEMD_BACKGROUND_JOBS=maybe)
+AC_MSG_RESULT($UDEV_SYSTEMD_BACKGROUND_JOBS)
 
 if test "$UDEV_SYSTEMD_BACKGROUND_JOBS" != no; then
 	pkg_config_init
 	PKG_CHECK_MODULES(SYSTEMD, systemd >= 205,
-			  [UDEV_SYSTEMD_BACKGROUND_JOBS=yes],
+			  [test "$UDEV_SYSTEMD_BACKGROUND_JOBS" = maybe && UDEV_SYSTEMD_BACKGROUND_JOBS=yes],
 			  [if test "$UDEV_SYSTEMD_BACKGROUND_JOBS" = maybe; then
 				UDEV_SYSTEMD_BACKGROUND_JOBS=no
 			   else
@@ -1358,9 +1344,6 @@ if test "$UDEV_SYSTEMD_BACKGROUND_JOBS" != no; then
 			   fi])
 fi
 
-AC_MSG_CHECKING(whether to use udev-systemd protocol for jobs in background)
-AC_MSG_RESULT($UDEV_SYSTEMD_BACKGROUND_JOBS)
-
 ################################################################################
 dnl -- Enable udev synchronisation
 AC_MSG_CHECKING(whether to enable synchronisation with udev processing)
@@ -1581,11 +1564,13 @@ dnl -- enable dmeventd handling
 AC_MSG_CHECKING(whether to use dmeventd)
 AC_ARG_ENABLE(dmeventd, AC_HELP_STRING([--enable-dmeventd],
 				       [enable the device-mapper event daemon]),
-	      BUILD_DMEVENTD=$enableval, BUILD_DMEVENTD=no)
-AC_MSG_RESULT($BUILD_DMEVENTD)
+	      DMEVENTD=$enableval)
+AC_MSG_RESULT($DMEVENTD)
+
+BUILD_DMEVENTD=$DMEVENTD
 
 dnl -- dmeventd currently requires internal mirror support
-if test "$BUILD_DMEVENTD" = yes; then
+if test "$DMEVENTD" = yes; then
    if test "$MIRRORS" != internal; then
       AC_MSG_ERROR([--enable-dmeventd currently requires --with-mirrors=internal])
    fi
@@ -1669,16 +1654,13 @@ fi
 
 ################################################################################
 dnl -- Check for realtime clock support
-RT_LIBS=
-HAVE_REALTIME=no
 if test "$REALTIME" = yes; then
-	AC_CHECK_FUNCS([clock_gettime], HAVE_REALTIME=yes)
-
-	AS_IF([test "$HAVE_REALTIME" != yes], [ # try again with -lrt
-	      AC_CHECK_LIB([rt], [clock_gettime], RT_LIBS="-lrt"; HAVE_REALTIME=yes)])
+	AC_CHECK_LIB(rt, clock_gettime, HAVE_REALTIME=yes, HAVE_REALTIME=no)
 
 	if test "$HAVE_REALTIME" = yes; then
 		AC_DEFINE([HAVE_REALTIME], 1, [Define to 1 to include support for realtime clock.])
+		LIBS="-lrt $LIBS"
+		RT_LIB="-lrt"
 	else
 		AC_MSG_WARN(Disabling realtime clock)
 	fi
@@ -1722,7 +1704,6 @@ Note: (n)curses also seems to work as a substitute for termcap.  This was
 		AC_DEFINE([READLINE_SUPPORT], 1,
 			[Define to 1 to include the LVM readline shell.])
 		dnl -- Try only with -lreadline and check for different symbol
-		READLINE=yes
 		LIBS=$lvm_saved_libs
 		AC_CHECK_LIB([readline], [rl_line_buffer],
 			[ READLINE_LIBS="-lreadline" ], [
@@ -1829,16 +1810,13 @@ dnl -- Ensure additional headers required
 if test "$READLINE" = yes; then
 	AC_CHECK_HEADERS(readline/readline.h readline/history.h,,hard_bailout)
 fi
-AC_MSG_CHECKING(whether to enable readline)
-AC_MSG_RESULT($READLINE)
 
 if test "$BUILD_CMIRRORD" = yes; then
 	AC_CHECK_FUNCS(atexit,,hard_bailout)
 fi
 
 if test "$BUILD_LVMLOCKD" = yes; then
-	AS_IF([test "$HAVE_REALTIME" != yes], [AC_MSG_ERROR([Realtime clock support is mandatory for lvmlockd.])])
-	AC_CHECK_FUNCS(strtoull,,hard_bailout)
+	AC_CHECK_FUNCS(clock_gettime strtoull,,hard_bailout)
 fi
 
 if test "$BUILD_LVMPOLLD" = yes; then
@@ -1858,7 +1836,7 @@ if test "$CLUSTER" != none; then
 	AC_CHECK_FUNCS(socket,,hard_bailout)
 fi
 
-if test "$BUILD_DMEVENTD" = yes; then
+if test "$DMEVENTD" = yes; then
 	AC_CHECK_HEADERS(arpa/inet.h,,hard_bailout)
 fi
 
@@ -1874,10 +1852,6 @@ if test "$UDEV_SYNC" = yes; then
 	AC_CHECK_HEADERS(sys/ipc.h sys/sem.h,,hard_bailout)
 fi
 
-if test "$BUILD_DMFILEMAPD" = yes; then
-	AC_CHECK_HEADERS([sys/inotify.h],,hard_bailout)
-fi
-
 ################################################################################
 AC_PATH_TOOL(MODPROBE_CMD, modprobe)
 
@@ -1897,10 +1871,6 @@ test "$prefix" != NONE && clvmd_prefix=$prefix
 CLVMD_PATH="$clvmd_prefix/sbin/clvmd"
 AC_DEFINE_UNQUOTED(CLVMD_PATH, ["$CLVMD_PATH"], [Path to clvmd binary.])
 
-
-FSADM_PATH="$lvm_exec_prefix/sbin/fsadm"
-AC_DEFINE_UNQUOTED(FSADM_PATH, ["$FSADM_PATH"], [Path to fsadm binary.])
-
 ################################################################################
 dnl -- dmeventd pidfile and executable path
 if test "$BUILD_DMEVENTD" = yes; then
@@ -2009,8 +1979,6 @@ LVM_MINOR=`echo "$VER" | $AWK -F '.' '{print $2}'`
 LVM_PATCHLEVEL=`echo "$VER" | $AWK -F '[[(.]]' '{print $3}'`
 LVM_LIBAPI=`echo "$VER" | $AWK -F '[[()]]' '{print $2}'`
 
-AC_DEFINE_UNQUOTED(LVM_CONFIGURE_LINE, "$CONFIGURE_LINE", [configure command line used])
-
 ################################################################################
 AC_SUBST(APPLIB)
 AC_SUBST(AWK)
@@ -2023,7 +1991,7 @@ AC_SUBST(BUILD_LVMPOLLD)
 AC_SUBST(BUILD_LVMLOCKD)
 AC_SUBST(BUILD_LOCKDSANLOCK)
 AC_SUBST(BUILD_LOCKDDLM)
-AC_SUBST(BUILD_DMFILEMAPD)
+AC_SUBST(BUILD_NOTIFYDBUS)
 AC_SUBST(CACHE)
 AC_SUBST(CFLAGS)
 AC_SUBST(CFLOW_CMD)
@@ -2070,11 +2038,11 @@ AC_SUBST(DEVMAPPER)
 AC_SUBST(DLM_CFLAGS)
 AC_SUBST(DLM_LIBS)
 AC_SUBST(DL_LIBS)
+AC_SUBST(DMEVENTD)
 AC_SUBST(DMEVENTD_PATH)
 AC_SUBST(DM_LIB_PATCHLEVEL)
 AC_SUBST(ELDFLAGS)
 AC_SUBST(FSADM)
-AC_SUBST(FSADM_PATH)
 AC_SUBST(BLKDEACTIVATE)
 AC_SUBST(HAVE_LIBDL)
 AC_SUBST(HAVE_REALTIME)
@@ -2119,7 +2087,7 @@ AC_SUBST(PYTHON3DIR)
 AC_SUBST(QUORUM_CFLAGS)
 AC_SUBST(QUORUM_LIBS)
 AC_SUBST(RAID)
-AC_SUBST(RT_LIBS)
+AC_SUBST(RT_LIB)
 AC_SUBST(READLINE_LIBS)
 AC_SUBST(REPLICATORS)
 AC_SUBST(SACKPT_CFLAGS)
@@ -2128,7 +2096,6 @@ AC_SUBST(SALCK_CFLAGS)
 AC_SUBST(SALCK_LIBS)
 AC_SUBST(SELINUX_LIBS)
 AC_SUBST(SELINUX_PC)
-AC_SUBST(SYSTEMD_LIBS)
 AC_SUBST(SNAPSHOTS)
 AC_SUBST(STATICDIR)
 AC_SUBST(STATIC_LINK)
@@ -2188,7 +2155,6 @@ daemons/dmeventd/plugins/raid/Makefile
 daemons/dmeventd/plugins/mirror/Makefile
 daemons/dmeventd/plugins/snapshot/Makefile
 daemons/dmeventd/plugins/thin/Makefile
-daemons/dmfilemapd/Makefile
 daemons/lvmdbusd/Makefile
 daemons/lvmdbusd/path.py
 daemons/lvmetad/Makefile
@@ -2265,14 +2231,10 @@ AS_IF([test -n "$THIN_CONFIGURE_WARN"],
       [AC_MSG_WARN([Support for thin provisioning is limited since some thin provisioning tools are missing!])])
 
 AS_IF([test -n "$THIN_CHECK_VERSION_WARN"],
-      [AC_MSG_WARN([You should also install latest thin_check vsn 0.7.0 (or later) for lvm2 thin provisioning])])
+      [AC_MSG_WARN([You should also install thin_check vsn 0.3.2 (or later) to use lvm2 thin provisioning])])
 
 AS_IF([test -n "$CACHE_CONFIGURE_WARN"],
       [AC_MSG_WARN([Support for cache is limited since some cache tools are missing!])])
 
-AS_IF([test -n "$CACHE_CHECK_VERSION_WARN"],
-      [AC_MSG_WARN([You should install latest cache_check vsn 0.7.0 to use lvm2 cache metadata format 2])])
-
-
 AS_IF([test "$ODIRECT" != yes],
       [AC_MSG_WARN([O_DIRECT disabled: low-memory pvmove may lock up])])

coverity/coverity_model.c

@@ -41,19 +41,6 @@ struct lv_segment *last_seg(const struct logical_volume *lv)
 	return ((struct lv_segment **)lv)[0];
 }
 
-const char *find_config_tree_str(struct cmd_context *cmd, int id, struct profile *profile)
-{
-	return "STRING";
-}
-
-struct logical_volume *origin_from_cow(const struct logical_volume *lv)
-{
-	if (lv)
-		return lv;
-
-	__coverity_panic__();
-}
-
 /* simple_memccpy() from glibc */
 void *memccpy(void *dest, const void *src, int c, size_t n)
 {
@@ -84,17 +71,6 @@ void model_FD_ZERO(void *fdset)
 		((long*)fdset)[i] = 0;
 }
 
-
-/* Resent Coverity reports quite weird errors... */
-int *__errno_location(void)
-{
-}
-const unsigned short **__ctype_b_loc (void)
-{
-}
-
-
-
 /*
  * Added extra pointer check to not need these models,
  * for now just keep then in file

daemons/Makefile.in

@@ -41,19 +41,15 @@ ifeq ("@BUILD_LVMPOLLD@", "yes")
 endif
 
 ifeq ("@BUILD_LVMLOCKD@", "yes")
-  SUBDIRS += lvmlockd
+  SUBDIRS += lvmlockd 
 endif
 
 ifeq ("@BUILD_LVMDBUSD@", "yes")
-  SUBDIRS += lvmdbusd
-endif
-
-ifeq ("@BUILD_DMFILEMAPD@", "yes")
-  SUBDIRS += dmfilemapd
+  SUBDIRS += lvmdbusd 
 endif
 
 ifeq ($(MAKECMDGOALS),distclean)
-  SUBDIRS = clvmd cmirrord dmeventd lvmetad lvmpolld lvmlockd lvmdbusd dmfilemapd
+  SUBDIRS = clvmd cmirrord dmeventd lvmetad lvmpolld lvmlockd lvmdbusd
 endif
 
 include $(top_builddir)/make.tmpl

daemons/clvmd/Makefile.in

@@ -31,9 +31,9 @@ SALCK_LIBS = @SALCK_LIBS@
 SALCK_CFLAGS = @SALCK_CFLAGS@
 
 SOURCES = \
-	clvmd-command.c\
-	clvmd.c\
-	lvm-functions.c\
+	clvmd-command.c  \
+	clvmd.c          \
+	lvm-functions.c  \
 	refresh_clvmd.c
 
 ifneq (,$(findstring cman,, "@CLVMD@,"))
@@ -72,17 +72,26 @@ endif
 TARGETS = \
 	clvmd
 
+LVMLIBS = $(LVMINTERNAL_LIBS)
+
+ifeq ("@DMEVENTD@", "yes")
+	LVMLIBS += -ldevmapper-event
+endif
+ 
 include $(top_builddir)/make.tmpl
 
-LIBS += $(LVMINTERNAL_LIBS) -ldevmapper $(PTHREAD_LIBS)
+LVMLIBS += -ldevmapper
+LIBS += $(PTHREAD_LIBS)
+
 CFLAGS += -fno-strict-aliasing $(EXTRA_EXEC_CFLAGS)
+LDFLAGS += $(EXTRA_EXEC_LDFLAGS)
 
 INSTALL_TARGETS = \
 	install_clvmd
 
 clvmd: $(OBJECTS) $(top_builddir)/lib/liblvm-internal.a
-	$(CC) $(CFLAGS) $(LDFLAGS) $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS) \
-	      -o clvmd $(OBJECTS) $(LMLIBS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o clvmd $(OBJECTS) \
+		$(LVMLIBS) $(LMLIBS) $(LIBS)
 
 .PHONY: install_clvmd
 

daemons/clvmd/clvmd-command.c

@@ -206,7 +206,7 @@ static int lock_vg(struct local_client *client)
 	lock_mode = ((int) lock_cmd & LCK_TYPE_MASK);
 	/* lock_flags = args[1]; */
 	lockname = &args[2];
-	DEBUGLOG("(%p) doing PRE command LOCK_VG '%s' at %x\n", client, lockname, lock_cmd);
+	DEBUGLOG("doing PRE command LOCK_VG '%s' at %x (client=%p)\n", lockname, lock_cmd, client);
 
 	if (lock_mode == LCK_UNLOCK) {
 		if (!(lkid = (int) (long) dm_hash_lookup(lock_hash, lockname)))
@@ -323,7 +323,7 @@ void cmd_client_cleanup(struct local_client *client)
 	int lkid;
 	char *lockname;
 
-	DEBUGLOG("(%p) Client thread cleanup\n", client);
+	DEBUGLOG("Client thread cleanup (%p)\n", client);
 	if (!client->bits.localsock.private)
 		return;
 
@@ -332,7 +332,7 @@ void cmd_client_cleanup(struct local_client *client)
 	dm_hash_iterate(v, lock_hash) {
 		lkid = (int)(long)dm_hash_get_data(lock_hash, v);
 		lockname = dm_hash_get_key(lock_hash, v);
-		DEBUGLOG("(%p) Cleanup: Unlocking lock %s %x\n", client, lockname, lkid);
+		DEBUGLOG("Cleanup (%p): Unlocking lock %s %x\n", client, lockname, lkid);
 		(void) sync_unlock(lockname, lkid);
 	}
 

daemons/clvmd/clvmd-corosync.c

@@ -532,7 +532,6 @@ static int _cluster_fd_callback(struct local_client *fd, char *buf, int len,
 static int _cluster_send_message(const void *buf, int msglen, const char *csid,
 				 const char *errtext)
 {
-	static pthread_mutex_t _mutex = PTHREAD_MUTEX_INITIALIZER;
 	struct iovec iov[2];
 	cs_error_t err;
 	int target_node;
@@ -547,10 +546,7 @@ static int _cluster_send_message(const void *buf, int msglen, const char *csid,
 	iov[1].iov_base = (char *)buf;
 	iov[1].iov_len = msglen;
 
-	pthread_mutex_lock(&_mutex);
 	err = cpg_mcast_joined(cpg_handle, CPG_TYPE_AGREED, iov, 2);
-	pthread_mutex_unlock(&_mutex);
-
 	return cs_to_errno(err);
 }
 

daemons/clvmd/clvmd-openais.c

@@ -425,6 +425,8 @@ static void _add_up_node(const char *csid)
 	DEBUGLOG("openais_add_up_node %d\n", ninfo->nodeid);
 
 	ninfo->state = NODE_CLVMD;
+
+	return;
 }
 
 /* Call a callback for each node, so the caller knows whether it's up or down */

daemons/clvmd/clvmd.c

@@ -58,7 +58,6 @@
 /* Head of the fd list. Also contains
    the cluster_socket details */
 static struct local_client local_client_head;
-static int _local_client_count = 0;
 
 static unsigned short global_xid = 0;	/* Last transaction ID issued */
 
@@ -69,37 +68,6 @@ static unsigned max_csid_len;
 static unsigned max_cluster_message;
 static unsigned max_cluster_member_name_len;
 
-static void _add_client(struct local_client *new_client, struct local_client *existing_client)
-{
-	_local_client_count++;
-	DEBUGLOG("(%p) Adding listener for fd %d. (Now %d monitored fds.)\n", new_client, new_client->fd, _local_client_count);
-	new_client->next = existing_client->next;
-	existing_client->next = new_client;
-}
-
-int add_client(struct local_client *new_client)
-{
-	_add_client(new_client, &local_client_head);
-
-	return 0;
-}
-
-/* Returns 0 if delfd is found and removed from list */
-static int _del_client(struct local_client *delfd)
-{
-	struct local_client *lastfd, *thisfd;
-
-	for (lastfd = &local_client_head; (thisfd = lastfd->next); lastfd = thisfd)
-		if (thisfd == delfd) {
-			DEBUGLOG("(%p) Removing listener for fd %d\n", thisfd, thisfd->fd);
-			lastfd->next = delfd->next;
-			_local_client_count--;
-			return 0;
-		}
-
-	return 1;
-}
-
 /* Structure of items on the LVM thread list */
 struct lvm_thread_cmd {
 	struct dm_list list;
@@ -124,7 +92,6 @@ static const size_t STACK_SIZE = 128 * 1024;
 static pthread_attr_t stack_attr;
 static int lvm_thread_exit = 0;
 static pthread_mutex_t lvm_thread_mutex;
-static pthread_mutex_t _debuglog_mutex = PTHREAD_MUTEX_INITIALIZER;
 static pthread_cond_t lvm_thread_cond;
 static pthread_barrier_t lvm_start_barrier;
 static struct dm_list lvm_cmd_head;
@@ -251,17 +218,14 @@ void debuglog(const char *fmt, ...)
 
 	switch (clvmd_get_debug()) {
 	case DEBUG_STDERR:
-		pthread_mutex_lock(&_debuglog_mutex);
 		va_start(ap,fmt);
 		time(&P);
 		fprintf(stderr, "CLVMD[%x]: %.15s ", (int)pthread_self(), ctime_r(&P, buf_ctime) + 4);
 		vfprintf(stderr, fmt, ap);
 		va_end(ap);
 		fflush(stderr);
-		pthread_mutex_unlock(&_debuglog_mutex);
 		break;
 	case DEBUG_SYSLOG:
-		pthread_mutex_lock(&_debuglog_mutex);
 		if (!syslog_init) {
 			openlog("clvmd", LOG_PID, LOG_DAEMON);
 			syslog_init = 1;
@@ -270,7 +234,6 @@ void debuglog(const char *fmt, ...)
 		va_start(ap,fmt);
 		vsyslog(LOG_DEBUG, fmt, ap);
 		va_end(ap);
-		pthread_mutex_unlock(&_debuglog_mutex);
 		break;
 	case DEBUG_OFF:
 		break;
@@ -554,7 +517,7 @@ int main(int argc, char *argv[])
 	/* Initialise the LVM thread variables */
 	dm_list_init(&lvm_cmd_head);
 	if (pthread_attr_init(&stack_attr) ||
-	    pthread_attr_setstacksize(&stack_attr, STACK_SIZE + getpagesize())) {
+	    pthread_attr_setstacksize(&stack_attr, STACK_SIZE)) {
 		log_sys_error("pthread_attr_init", "");
 		exit(1);
 	}
@@ -621,7 +584,6 @@ int main(int argc, char *argv[])
 	local_client_head.fd = clops->get_main_cluster_fd();
 	local_client_head.type = CLUSTER_MAIN_SOCK;
 	local_client_head.callback = clops->cluster_fd_callback;
-	_local_client_count++;
 
 	/* Add the local socket to the list */
 	if (!(newfd = dm_zalloc(sizeof(struct local_client)))) {
@@ -632,14 +594,14 @@ int main(int argc, char *argv[])
 	newfd->fd = local_sock;
 	newfd->type = LOCAL_RENDEZVOUS;
 	newfd->callback = local_rendezvous_callback;
-
-	(void) add_client(newfd);
+	newfd->next = local_client_head.next;
+	local_client_head.next = newfd;
 
 	/* This needs to be started after cluster initialisation
 	   as it may need to take out locks */
 	DEBUGLOG("Starting LVM thread\n");
-	DEBUGLOG("(%p) Main cluster socket fd %d with local socket %d (%p)\n",
-		 &local_client_head, local_client_head.fd, newfd->fd, newfd);
+	DEBUGLOG("Main cluster socket fd %d (%p) with local socket %d (%p)\n",
+		 local_client_head.fd, &local_client_head, newfd->fd, newfd);
 
 	/* Don't let anyone else to do work until we are started */
 	if (pthread_create(&lvm_thread, &stack_attr, lvm_thread_fn, &lvm_params)) {
@@ -675,7 +637,6 @@ int main(int argc, char *argv[])
 
 	while ((delfd = local_client_head.next)) {
 		local_client_head.next = delfd->next;
-		_local_client_count--;
 		/* Failing cleanup_zombie leaks... */
 		if (delfd->type == LOCAL_SOCK && !cleanup_zombie(delfd))
 			cmd_client_cleanup(delfd); /* calls sync_unlock */
@@ -737,13 +698,13 @@ static int local_rendezvous_callback(struct local_client *thisfd, char *buf,
 		pthread_mutex_init(&newfd->bits.localsock.mutex, NULL);
 
 		if (fcntl(client_fd, F_SETFD, 1))
-			DEBUGLOG("(%p) Setting CLOEXEC on client fd %d failed: %s\n", thisfd, client_fd, strerror(errno));
+			DEBUGLOG("Setting CLOEXEC on client fd failed: %s\n", strerror(errno));
 
 		newfd->fd = client_fd;
 		newfd->type = LOCAL_SOCK;
 		newfd->callback = local_sock_callback;
 		newfd->bits.localsock.all_success = 1;
-		DEBUGLOG("(%p) Got new connection on fd %d\n", newfd, newfd->fd);
+		DEBUGLOG("Got new connection on fd %d (%p)\n", newfd->fd, newfd);
 		*new_client = newfd;
 	}
 	return 1;
@@ -765,8 +726,8 @@ static int local_pipe_callback(struct local_client *thisfd, char *buf,
 	if (len == sizeof(int))
 		memcpy(&status, buffer, sizeof(int));
 
-	DEBUGLOG("(%p) Read on pipe %d, %d bytes, status %d\n",
-		 thisfd, thisfd->fd, len, status);
+	DEBUGLOG("Read on pipe %d, %d bytes, status %d\n",
+		 thisfd->fd, len, status);
 
 	/* EOF on pipe or an error, close it */
 	if (len <= 0) {
@@ -789,11 +750,11 @@ static int local_pipe_callback(struct local_client *thisfd, char *buf,
 		}
 		return -1;
 	} else {
-		DEBUGLOG("(%p) Background routine status was %d, sock_client %p\n",
-			 thisfd, status, sock_client);
+		DEBUGLOG("Background routine status was %d, sock_client (%p)\n",
+			 status, sock_client);
 		/* But has the client gone away ?? */
 		if (!sock_client) {
-			DEBUGLOG("(%p) Got pipe response for dead client, ignoring it\n", thisfd);
+			DEBUGLOG("Got pipe response for dead client, ignoring it\n");
 		} else {
 			/* If error then just return that code */
 			if (status)
@@ -833,7 +794,7 @@ static void timedout_callback(struct local_client *client, const char *csid,
 		return;
 
 	clops->name_from_csid(csid, nodename);
-	DEBUGLOG("(%p) Checking for a reply from %s\n", client, nodename);
+	DEBUGLOG("Checking for a reply from %s\n", nodename);
 	pthread_mutex_lock(&client->bits.localsock.mutex);
 
 	reply = client->bits.localsock.replies;
@@ -843,7 +804,7 @@ static void timedout_callback(struct local_client *client, const char *csid,
 	pthread_mutex_unlock(&client->bits.localsock.mutex);
 
 	if (!reply) {
-		DEBUGLOG("(%p) Node %s timed-out\n", client, nodename);
+		DEBUGLOG("Node %s timed-out\n", nodename);
 		add_reply_to_list(client, ETIMEDOUT, csid,
 				  "Command timed out", 18);
 	}
@@ -858,7 +819,7 @@ static void timedout_callback(struct local_client *client, const char *csid,
 */
 static void request_timed_out(struct local_client *client)
 {
-	DEBUGLOG("(%p) Request timed-out. padding\n", client);
+	DEBUGLOG("Request timed-out. padding\n");
 	clops->cluster_do_node_callback(client, timedout_callback);
 
 	if (!client->bits.localsock.threadid)
@@ -892,11 +853,13 @@ static void main_loop(int cmd_timeout)
 	while (!quit) {
 		fd_set in;
 		int select_status;
-		struct local_client *thisfd, *nextfd;
+		struct local_client *thisfd;
 		struct timeval tv = { cmd_timeout, 0 };
 		int quorate = clops->is_quorate();
 		int client_count = 0;
 		int max_fd = 0;
+		struct local_client *lastfd = &local_client_head;
+		struct local_client *nextfd = local_client_head.next;
 
 		/* Wait on the cluster FD and all local sockets/pipes */
 		local_client_head.fd = clops->get_main_cluster_fd();
@@ -912,22 +875,21 @@ static void main_loop(int cmd_timeout)
  			fprintf(stderr, "WARNING: Your cluster may freeze up if the number of clvmd file descriptors (%d) exceeds %d.\n", max_fd + 1, FD_SETSIZE);
 		}
 
-		for (thisfd = &local_client_head; thisfd; thisfd = nextfd) {
-			nextfd = thisfd->next;
+		for (thisfd = &local_client_head; thisfd; thisfd = nextfd, nextfd = thisfd ? thisfd->next : NULL) {
 
 			if (thisfd->removeme && !cleanup_zombie(thisfd)) {
-				/* cleanup_zombie might have removed the next list element */
-				nextfd = thisfd->next;
-
-				(void) _del_client(thisfd);
-
-				DEBUGLOG("(%p) removeme set with %d monitored fds remaining\n", thisfd, _local_client_count);
+				struct local_client *free_fd = thisfd;
+				lastfd->next = nextfd;
+				DEBUGLOG("removeme set for %p with %d monitored fds remaining\n", free_fd, client_count - 1);
 
 				/* Queue cleanup, this also frees the client struct */
-				add_to_lvmqueue(thisfd, NULL, 0, NULL);
+				add_to_lvmqueue(free_fd, NULL, 0, NULL);
+
 				continue;
 			}
 
+			lastfd = thisfd;
+
 			if (thisfd->removeme)
 				continue;
 
@@ -977,15 +939,16 @@ static void main_loop(int cmd_timeout)
 						    type == CLUSTER_INTERNAL)
 							goto closedown;
 
-						DEBUGLOG("(%p) ret == %d, errno = %d. removing client\n",
-							 thisfd, ret, errno);
+						DEBUGLOG("ret == %d, errno = %d. removing client\n",
+							 ret, errno);
 						thisfd->removeme = 1;
 						continue;
 					}
 
 					/* New client...simply add it to the list */
 					if (newfd) {
-						_add_client(newfd, thisfd);
+						newfd->next = thisfd->next;
+						thisfd->next = newfd;
 						thisfd = newfd;
 					}
 				}
@@ -1003,8 +966,8 @@ static void main_loop(int cmd_timeout)
 				    thisfd->bits.localsock.expected_replies !=
 				    thisfd->bits.localsock.num_replies) {
 					/* Send timed out message + replies we already have */
-					DEBUGLOG("Request to client %p timed-out (send: %ld, now: %ld)\n",
-						 thisfd, thisfd->bits.localsock.sent_time, the_time);
+					DEBUGLOG("Request timed-out (send: %ld, now: %ld)\n",
+						 thisfd->bits.localsock.sent_time, the_time);
 
 					thisfd->bits.localsock.all_success = 0;
 
@@ -1216,8 +1179,8 @@ static int cleanup_zombie(struct local_client *thisfd)
 	if (!thisfd->bits.localsock.cleanup_needed)
 		return 0;
 
-	DEBUGLOG("(%p) EOF on local socket %d: inprogress=%d\n",
-		 thisfd, thisfd->fd, thisfd->bits.localsock.in_progress);
+	DEBUGLOG("EOF on local socket: inprogress=%d\n",
+		 thisfd->bits.localsock.in_progress);
 
 	if ((pipe_client = thisfd->bits.localsock.pipe_client))
 		pipe_client = pipe_client->bits.pipe.client;
@@ -1239,7 +1202,7 @@ static int cleanup_zombie(struct local_client *thisfd)
 
 	/* Kill the subthread & free resources */
 	if (thisfd->bits.localsock.threadid) {
-		DEBUGLOG("(%p) Waiting for pre&post thread\n", pipe_client);
+		DEBUGLOG("Waiting for pre&post thread (%p)\n", pipe_client);
 		pthread_mutex_lock(&thisfd->bits.localsock.mutex);
 		thisfd->bits.localsock.state = PRE_COMMAND;
 		thisfd->bits.localsock.finished = 1;
@@ -1250,22 +1213,26 @@ static int cleanup_zombie(struct local_client *thisfd)
 					  (void **) &status)))
 			log_sys_error("pthread_join", "");
 
-		DEBUGLOG("(%p) Joined pre&post thread\n", pipe_client);
+		DEBUGLOG("Joined pre&post thread\n");
 
 		thisfd->bits.localsock.threadid = 0;
 
 		/* Remove the pipe client */
 		if (thisfd->bits.localsock.pipe_client) {
-			struct local_client *delfd = thisfd->bits.localsock.pipe_client;
+			struct local_client *delfd;
+			struct local_client *lastfd;
 
-			(void) close(delfd->fd);	/* Close pipe */
+			(void) close(thisfd->bits.localsock.pipe_client->fd);	/* Close pipe */
 			(void) close(thisfd->bits.localsock.pipe);
 
 			/* Remove pipe client */
-			if (!_del_client(delfd)) {
-				dm_free(delfd);
-				thisfd->bits.localsock.pipe_client = NULL;
-			}
+			for (lastfd = &local_client_head; (delfd = lastfd->next); lastfd = delfd)
+				if (thisfd->bits.localsock.pipe_client == delfd) {
+					thisfd->bits.localsock.pipe_client = NULL;
+					lastfd->next = delfd->next;
+					dm_free(delfd);
+					break;
+				}
 		}
 	}
 
@@ -1296,7 +1263,7 @@ static int read_from_local_sock(struct local_client *thisfd)
 	if (len == -1 && errno == EINTR)
 		return 1;
 
-	DEBUGLOG("(%p) Read on local socket %d, len = %d\n", thisfd, thisfd->fd, len);
+	DEBUGLOG("Read on local socket %d, len = %d\n", thisfd->fd, len);
 
 	if (len && verify_message(buffer, len) < 0) {
 		log_error("read_from_local_sock from %d len %d bad verify.",
@@ -1370,15 +1337,15 @@ static int read_from_local_sock(struct local_client *thisfd)
 		char *argptr = inheader->node + strlen(inheader->node) + 1;
 
 		while (missing_len > 0) {
-			DEBUGLOG("(%p) got %d bytes, need another %d (total %d)\n",
-				 thisfd, argslen, missing_len, inheader->arglen);
+			DEBUGLOG("got %d bytes, need another %d (total %d)\n",
+				 argslen, missing_len, inheader->arglen);
 			len = read(thisfd->fd, argptr + argslen, missing_len);
 			if (len == -1 && errno == EINTR)
 				continue;
 
 			if (len <= 0) {
 				/* EOF or error on socket */
-				DEBUGLOG("(%p) EOF on local socket\n", thisfd);
+				DEBUGLOG("EOF on local socket\n");
 				dm_free(thisfd->bits.localsock.cmd);
 				thisfd->bits.localsock.cmd = NULL;
 				return 0;
@@ -1406,7 +1373,7 @@ static int read_from_local_sock(struct local_client *thisfd)
 			.status = ENOENT
 		};
 
-		DEBUGLOG("(%p) Unknown node: '%s'\n", thisfd, inheader->node);
+		DEBUGLOG("Unknown node: '%s'\n", inheader->node);
 		send_message(&reply, sizeof(reply), our_csid, thisfd->fd,
 			     "Error sending ENOENT reply to local user");
 		thisfd->bits.localsock.expected_replies = 0;
@@ -1432,7 +1399,7 @@ static int read_from_local_sock(struct local_client *thisfd)
 			.status = EBUSY
 		};
 
-		DEBUGLOG("(%p) Creating pipe failed: %s\n", thisfd, strerror(errno));
+		DEBUGLOG("Creating pipe failed: %s\n", strerror(errno));
 		send_message(&reply, sizeof(reply), our_csid, thisfd->fd,
 			     "Error sending EBUSY reply to local user");
 		return len;
@@ -1452,7 +1419,7 @@ static int read_from_local_sock(struct local_client *thisfd)
 		return len;
 	}
 
-	DEBUGLOG("(%p) Creating pipe, [%d, %d]\n", thisfd, comms_pipe[0], comms_pipe[1]);
+	DEBUGLOG("Creating pipe, [%d, %d]\n", comms_pipe[0], comms_pipe[1]);
 
 	if (fcntl(comms_pipe[0], F_SETFD, 1))
 		DEBUGLOG("setting CLOEXEC on pipe[0] failed: %s\n", strerror(errno));
@@ -1463,8 +1430,8 @@ static int read_from_local_sock(struct local_client *thisfd)
 	newfd->type = THREAD_PIPE;
 	newfd->callback = local_pipe_callback;
 	newfd->bits.pipe.client = thisfd;
-
-	_add_client(newfd, thisfd);
+	newfd->next = thisfd->next;
+	thisfd->next = newfd;
 
 	/* Store a cross link to the pipe */
 	thisfd->bits.localsock.pipe_client = newfd;
@@ -1477,10 +1444,10 @@ static int read_from_local_sock(struct local_client *thisfd)
 	thisfd->bits.localsock.in_progress = TRUE;
 	thisfd->bits.localsock.state = PRE_COMMAND;
 	thisfd->bits.localsock.cleanup_needed = 1;
-	DEBUGLOG("(%p) Creating pre&post thread for pipe fd %d\n", newfd, newfd->fd);
+	DEBUGLOG("Creating pre&post thread for pipe fd %d (%p)\n", newfd->fd, newfd);
 	status = pthread_create(&thisfd->bits.localsock.threadid,
 				&stack_attr, pre_and_post_thread, thisfd);
-	DEBUGLOG("(%p) Created pre&post thread, state = %d\n", newfd, status);
+	DEBUGLOG("Created pre&post thread, state = %d\n", status);
 
 	return len;
 }
@@ -1488,6 +1455,13 @@ static int read_from_local_sock(struct local_client *thisfd)
 /* Add a file descriptor from the cluster or comms interface to
    our list of FDs for select
 */
+int add_client(struct local_client *new_client)
+{
+	new_client->next = local_client_head.next;
+	local_client_head.next = new_client;
+
+	return 0;
+}
 
 /* Called when the pre-command has completed successfully - we
    now execute the real command on all the requested nodes */
@@ -1498,8 +1472,8 @@ static int distribute_command(struct local_client *thisfd)
 	int len = thisfd->bits.localsock.cmd_len;
 
 	thisfd->xid = global_xid++;
-	DEBUGLOG("(%p) distribute command: XID = %d, flags=0x%x (%s%s)\n",
-		 thisfd, thisfd->xid, inheader->flags,
+	DEBUGLOG("distribute command: XID = %d, flags=0x%x (%s%s)\n",
+		 thisfd->xid, inheader->flags,
 		(inheader->flags & CLVMD_FLAG_LOCAL) ? "LOCAL" : "",
 		(inheader->flags & CLVMD_FLAG_REMOTE) ? "REMOTE" : "");
 
@@ -1521,7 +1495,7 @@ static int distribute_command(struct local_client *thisfd)
 			 */
 			add_to_lvmqueue(thisfd, inheader, len, NULL);
 
-			DEBUGLOG("(%p) Sending message to all cluster nodes\n", thisfd);
+			DEBUGLOG("Sending message to all cluster nodes\n");
 			inheader->xid = thisfd->xid;
 			send_message(inheader, len, NULL, -1,
 				     "Error forwarding message to cluster");
@@ -1540,11 +1514,11 @@ static int distribute_command(struct local_client *thisfd)
 
 			/* Are we the requested node ?? */
 			if (memcmp(csid, our_csid, max_csid_len) == 0) {
-				DEBUGLOG("(%p) Doing command on local node only\n", thisfd);
+				DEBUGLOG("Doing command on local node only\n");
 				add_to_lvmqueue(thisfd, inheader, len, NULL);
 			} else {
-				DEBUGLOG("(%p) Sending message to single node: %s\n",
-					 thisfd, inheader->node);
+				DEBUGLOG("Sending message to single node: %s\n",
+					 inheader->node);
 				inheader->xid = thisfd->xid;
 				send_message(inheader, len, csid, -1,
 					     "Error forwarding message to cluster node");
@@ -1555,7 +1529,7 @@ static int distribute_command(struct local_client *thisfd)
 		thisfd->bits.localsock.in_progress = TRUE;
 		thisfd->bits.localsock.expected_replies = 1;
 		thisfd->bits.localsock.num_replies = 0;
-		DEBUGLOG("(%p) Doing command explicitly on local node only\n", thisfd);
+		DEBUGLOG("Doing command explicitly on local node only\n");
 		add_to_lvmqueue(thisfd, inheader, len, NULL);
 	}
 
@@ -1681,7 +1655,7 @@ static void add_reply_to_list(struct local_client *client, int status,
 
 	reply->status = status;
 	clops->name_from_csid(csid, reply->node);
-	DEBUGLOG("(%p) Reply from node %s: %d bytes\n", client, reply->node, len);
+	DEBUGLOG("Reply from node %s: %d bytes\n", reply->node, len);
 
 	if (len > 0) {
 		if (!(reply->replymsg = dm_malloc(len)))
@@ -1708,8 +1682,8 @@ static void add_reply_to_list(struct local_client *client, int status,
 			client->bits.localsock.state = POST_COMMAND;
 			pthread_cond_signal(&client->bits.localsock.cond);
 		}
-		DEBUGLOG("(%p) Got %d replies, expecting: %d\n",
-			 client, client->bits.localsock.num_replies,
+		DEBUGLOG("Got %d replies, expecting: %d\n",
+			 client->bits.localsock.num_replies,
 			 client->bits.localsock.expected_replies);
 	}
 	pthread_mutex_unlock(&client->bits.localsock.mutex);
@@ -1724,7 +1698,7 @@ static __attribute__ ((noreturn)) void *pre_and_post_thread(void *arg)
 	sigset_t ss;
 	int pipe_fd = client->bits.localsock.pipe;
 
-	DEBUGLOG("(%p) Pre&post thread pipe fd %d\n", client, pipe_fd);
+	DEBUGLOG("Pre&post thread (%p), pipe fd %d\n", client, pipe_fd);
 	pthread_mutex_lock(&client->bits.localsock.mutex);
 
 	/* Ignore SIGUSR1 (handled by master process) but enable
@@ -1744,7 +1718,7 @@ static __attribute__ ((noreturn)) void *pre_and_post_thread(void *arg)
 		if ((status = do_pre_command(client)))
 			client->bits.localsock.all_success = 0;
 
-		DEBUGLOG("(%p) Pre&post thread writes status %d down to pipe fd %d\n",
+		DEBUGLOG("Pre&post thread (%p) writes status %d down to pipe fd %d\n",
 			 client, status, pipe_fd);
 
 		/* Tell the parent process we have finished this bit */
@@ -1762,13 +1736,13 @@ static __attribute__ ((noreturn)) void *pre_and_post_thread(void *arg)
 		/* We may need to wait for the condition variable before running the post command */
 		if (client->bits.localsock.state != POST_COMMAND &&
 		    !client->bits.localsock.finished) {
-			DEBUGLOG("(%p) Pre&post thread waiting to do post command, state = %d\n",
+			DEBUGLOG("Pre&post thread (%p) waiting to do post command, state = %d\n",
 				 client, client->bits.localsock.state);
 			pthread_cond_wait(&client->bits.localsock.cond,
 					  &client->bits.localsock.mutex);
 		}
 
-		DEBUGLOG("(%p) Pre&post thread got post command condition...\n", client);
+		DEBUGLOG("Pre&post thread (%p) got post command condition...\n", client);
 
 		/* POST function must always run, even if the client aborts */
 		status = 0;
@@ -1782,15 +1756,15 @@ static __attribute__ ((noreturn)) void *pre_and_post_thread(void *arg)
 next_pre:
 		if (client->bits.localsock.state != PRE_COMMAND &&
 		    !client->bits.localsock.finished) {
-			DEBUGLOG("(%p) Pre&post thread waiting for next pre command\n", client);
+			DEBUGLOG("Pre&post thread (%p) waiting for next pre command\n", client);
 			pthread_cond_wait(&client->bits.localsock.cond,
 					  &client->bits.localsock.mutex);
 		}
 
-		DEBUGLOG("(%p) Pre&post thread got pre command condition...\n", client);
+		DEBUGLOG("Pre&post thread (%p) got pre command condition...\n", client);
 	}
 	pthread_mutex_unlock(&client->bits.localsock.mutex);
-	DEBUGLOG("(%p) Pre&post thread finished\n", client);
+	DEBUGLOG("Pre&post thread (%p) finished\n", client);
 
 	pthread_exit(NULL);
 }
@@ -1808,8 +1782,8 @@ static int process_local_command(struct clvm_header *msg, int msglen,
 	if (!(replybuf = dm_malloc(max_cluster_message)))
 		return -1;
 
-	DEBUGLOG("(%p) process_local_command: %s msg=%p, msglen =%d\n",
-		 client, decode_cmd(msg->cmd), msg, msglen);
+	DEBUGLOG("process_local_command: %s msg=%p, msglen =%d, client=%p\n",
+		 decode_cmd(msg->cmd), msg, msglen, client);
 
 	/* If remote flag is set, just set a successful status code. */
 	if (msg->flags & CLVMD_FLAG_REMOTE)
@@ -1824,8 +1798,8 @@ static int process_local_command(struct clvm_header *msg, int msglen,
 	if (xid == client->xid)
 		add_reply_to_list(client, status, our_csid, replybuf, replylen);
 	else
-		DEBUGLOG("(%p) Local command took too long, discarding xid %d, current is %d\n",
-			 client, xid, client->xid);
+		DEBUGLOG("Local command took too long, discarding xid %d, current is %d\n",
+			 xid, client->xid);
 
 	dm_free(replybuf);
 
@@ -1867,7 +1841,7 @@ static void send_local_reply(struct local_client *client, int status, int fd)
 	char *ptr;
 	int message_len = 0;
 
-	DEBUGLOG("(%p) Send local reply\n", client);
+	DEBUGLOG("Send local reply\n");
 
 	/* Work out the total size of the reply */
 	while (thisreply) {
@@ -1884,7 +1858,7 @@ static void send_local_reply(struct local_client *client, int status, int fd)
 	/* Add in the size of our header */
 	message_len = message_len + sizeof(struct clvm_header);
 	if (!(replybuf = dm_malloc(message_len))) {
-		DEBUGLOG("(%p) Memory allocation fails\n", client);
+		DEBUGLOG("Memory allocation fails\n");
 		return;
 	}
 
@@ -2013,7 +1987,6 @@ static int send_message(void *buf, int msglen, const char *csid, int fd,
 				(void) nanosleep (&delay, &remtime);
 				continue;
 			}
-			DEBUGLOG("%s", errtext);
 			log_error("%s", errtext);
 			break;
 		}
@@ -2027,7 +2000,7 @@ static int process_work_item(struct lvm_thread_cmd *cmd)
 {
 	/* If msg is NULL then this is a cleanup request */
 	if (cmd->msg == NULL) {
-		DEBUGLOG("(%p) process_work_item: free\n", cmd->client);
+		DEBUGLOG("process_work_item: free %p\n", cmd->client);
 		cmd_client_cleanup(cmd->client);
 		pthread_mutex_destroy(&cmd->client->bits.localsock.mutex);
 		pthread_cond_destroy(&cmd->client->bits.localsock.cond);
@@ -2036,11 +2009,11 @@ static int process_work_item(struct lvm_thread_cmd *cmd)
 	}
 
 	if (!cmd->remote) {
-		DEBUGLOG("(%p) process_work_item: local\n", cmd->client);
+		DEBUGLOG("process_work_item: local\n");
 		process_local_command(cmd->msg, cmd->msglen, cmd->client,
 				      cmd->xid);
 	} else {
-		DEBUGLOG("(%p) process_work_item: remote\n", cmd->client);
+		DEBUGLOG("process_work_item: remote\n");
 		process_remote_command(cmd->msg, cmd->msglen, cmd->client->fd,
 				       cmd->csid);
 	}
@@ -2134,8 +2107,8 @@ static int add_to_lvmqueue(struct local_client *client, struct clvm_header *msg,
 	} else
 		cmd->remote = 0;
 
-	DEBUGLOG("(%p) add_to_lvmqueue: cmd=%p, msg=%p, len=%d, csid=%p, xid=%d\n",
-		 client, cmd, msg, msglen, csid, cmd->xid);
+	DEBUGLOG("add_to_lvmqueue: cmd=%p. client=%p, msg=%p, len=%d, csid=%p, xid=%d\n",
+		 cmd, client, msg, msglen, csid, cmd->xid);
 	pthread_mutex_lock(&lvm_thread_mutex);
 	if (lvm_thread_exit) {
 		pthread_mutex_unlock(&lvm_thread_mutex);
@@ -2271,8 +2244,7 @@ static void check_all_callback(struct local_client *client, const char *csid,
    If not, returns -1 and prints out a list of errant nodes */
 static int check_all_clvmds_running(struct local_client *client)
 {
-	DEBUGLOG("(%p) check_all_clvmds_running\n", client);
-
+	DEBUGLOG("check_all_clvmds_running\n");
 	return clops->cluster_do_node_callback(client, check_all_callback);
 }
 
@@ -2311,11 +2283,13 @@ static void ntoh_clvm(struct clvm_header *hdr)
 static void sigusr2_handler(int sig)
 {
 	DEBUGLOG("SIGUSR2 received\n");
+	return;
 }
 
 static void sigterm_handler(int sig)
 {
 	quit = 1;
+	return;
 }
 
 static void sighup_handler(int sig)

daemons/cmirrord/Makefile.in

@@ -29,7 +29,7 @@ include $(top_builddir)/make.tmpl
 LIBS += -ldevmapper
 LMLIBS += $(CPG_LIBS) $(SACKPT_LIBS)
 CFLAGS += $(CPG_CFLAGS) $(SACKPT_CFLAGS) $(EXTRA_EXEC_CFLAGS)
-LDFLAGS += $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS)
+LDFLAGS += $(EXTRA_EXEC_LDFLAGS)
 
 cmirrord: $(OBJECTS) $(top_builddir)/lib/liblvm-internal.a
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) \

daemons/cmirrord/cluster.c

@@ -182,7 +182,7 @@ int cluster_send(struct clog_request *rq)
 	}
 
 	/*
-	 * Once the request heads for the cluster, the luid loses
+	 * Once the request heads for the cluster, the luid looses
 	 * all its meaning.
 	 */
 	rq->u_rq.luid = 0;

daemons/cmirrord/functions.c

@@ -377,7 +377,7 @@ static int _clog_ctr(char *uuid, uint64_t luid,
 	uint32_t block_on_error = 0;
 
 	int disk_log;
-	char disk_path[PATH_MAX];
+	char disk_path[128];
 	int unlink_path = 0;
 	long page_size;
 	int pages;

daemons/dmeventd/Makefile.in

@@ -56,16 +56,18 @@ include $(top_builddir)/make.tmpl
 all: device-mapper
 device-mapper: $(TARGETS)
 
+LIBS += -ldevmapper
+LVMLIBS += -ldevmapper-event $(PTHREAD_LIBS)
+
 CFLAGS_dmeventd.o += $(EXTRA_EXEC_CFLAGS)
-LIBS += -ldevmapper $(PTHREAD_LIBS)
 
 dmeventd: $(LIB_SHARED) dmeventd.o
-	$(CC) $(CFLAGS) -L. $(LDFLAGS) $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS) dmeventd.o \
-		-o $@ $(DL_LIBS) $(DMEVENT_LIBS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS) -L. -o $@ dmeventd.o \
+	$(DL_LIBS) $(LVMLIBS) $(LIBS) -rdynamic
 
 dmeventd.static: $(LIB_STATIC) dmeventd.o $(interfacebuilddir)/libdevmapper.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -static -L. -L$(interfacebuilddir) dmeventd.o \
-		-o $@ $(DL_LIBS) $(DMEVENT_LIBS) $(LIBS) $(STATIC_LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) $(ELDFLAGS) -static -L. -L$(interfacebuilddir) -o $@ \
+	dmeventd.o $(DL_LIBS) $(LVMLIBS) $(LIBS) $(STATIC_LIBS)
 
 ifeq ("@PKGCONFIG@", "yes")
   INSTALL_LIB_TARGETS += install_pkgconfig

daemons/dmeventd/dmeventd.c

@@ -468,7 +468,7 @@ static int _pthread_create_smallstack(pthread_t *t, void *(*fun)(void *), void *
 	/*
 	 * We use a smaller stack since it gets preallocated in its entirety
 	 */
-	pthread_attr_setstacksize(&attr, THREAD_STACK_SIZE + getpagesize());
+	pthread_attr_setstacksize(&attr, THREAD_STACK_SIZE);
 
 	/*
 	 * If no-one will be waiting, we need to detach.
@@ -2252,8 +2252,7 @@ int main(int argc, char *argv[])
 					 "for %ld second(s), exiting.",
 					 (long) (time(NULL) - _idle_since));
 				break;
-			}
-			if (idle_exit_timeout) {
+			} else if (idle_exit_timeout) {
 				now = time(NULL);
 				if (now < _idle_since)
 					_idle_since = now; /* clock change? */

daemons/dmeventd/libdevmapper-event.c

@@ -250,9 +250,10 @@ static int _daemon_read(struct dm_event_fifos *fifos,
 		if (ret < 0) {
 			if ((errno == EINTR) || (errno == EAGAIN))
 				continue;
-
-			log_error("Unable to read from event server.");
-			return 0;
+			else {
+				log_error("Unable to read from event server.");
+				return 0;
+			}
 		}
 
 		bytes += ret;
@@ -328,9 +329,10 @@ static int _daemon_write(struct dm_event_fifos *fifos,
 		if (ret < 0) {
 			if ((errno == EINTR) || (errno == EAGAIN))
 				continue;
-
-			log_error("Unable to talk to event daemon.");
-			return 0;
+			else {
+				log_error("Unable to talk to event daemon.");
+				return 0;
+			}
 		}
 
 		bytes += ret;
@@ -452,8 +454,7 @@ static int _start_daemon(char *dmeventd_path, struct dm_event_fifos *fifos)
 		if (close(fifos->client))
 			log_sys_debug("close", fifos->client_path);
 		return 1;
-	}
-	if (errno != ENXIO && errno != ENOENT)  {
+	} else if (errno != ENXIO && errno != ENOENT)  {
 		/* problem */
 		log_sys_error("open", fifos->client_path);
 		return 0;

daemons/dmeventd/plugins/lvm2/dmeventd_lvm.c

@@ -121,7 +121,6 @@ int dmeventd_lvm2_run(const char *cmdline)
 int dmeventd_lvm2_command(struct dm_pool *mem, char *buffer, size_t size,
 			  const char *cmd, const char *device)
 {
-	static char _internal_prefix[] =  "_dmeventd_";
 	char *vg = NULL, *lv = NULL, *layer;
 	int r;
 
@@ -136,21 +135,6 @@ int dmeventd_lvm2_command(struct dm_pool *mem, char *buffer, size_t size,
 	    (layer = strstr(lv, "_mlog")))
 		*layer = '\0';
 
-	if (!strncmp(cmd, _internal_prefix, sizeof(_internal_prefix) - 1)) {
-		dmeventd_lvm2_lock();
-		/* output of internal command passed via env var */
-		if (!dmeventd_lvm2_run(cmd))
-			cmd = NULL;
-		else if ((cmd = getenv(cmd)))
-			cmd = dm_pool_strdup(mem, cmd); /* copy with lock */
-		dmeventd_lvm2_unlock();
-
-		if (!cmd) {
-			log_error("Unable to find configured command.");
-			return 0;
-		}
-	}
-
 	r = dm_snprintf(buffer, size, "%s %s/%s", cmd, vg, lv);
 
 	dm_pool_free(mem, vg);

daemons/dmeventd/plugins/mirror/dmeventd_mirror.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005-2017 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2005-2015 Red Hat, Inc. All rights reserved.
  *
  * This file is part of LVM2.
  *
@@ -25,6 +25,7 @@
 
 struct dso_state {
 	struct dm_pool *mem;
+	char cmd_lvscan[512];
 	char cmd_lvconvert[512];
 };
 
@@ -98,8 +99,12 @@ static int _get_mirror_event(struct dso_state *state, char *params)
 	return r;
 }
 
-static int _remove_failed_devices(const char *cmd_lvconvert, const char *device)
+static int _remove_failed_devices(const char *cmd_lvscan, const char *cmd_lvconvert,
+				  const char *device)
 {
+	if (!dmeventd_lvm2_run_with_lock(cmd_lvscan))
+		log_warn("WARNING: Re-scan of mirrored device %s failed.", device);
+
 	/* if repair goes OK, report success even if lvscan has failed */
 	if (!dmeventd_lvm2_run_with_lock(cmd_lvconvert)) {
 		log_error("Repair of mirrored device %s failed.", device);
@@ -146,7 +151,9 @@ void process_event(struct dm_task *dmt,
 			break;
 		case ME_FAILURE:
 			log_error("Device failure in %s.", device);
-			if (!_remove_failed_devices(state->cmd_lvconvert, device))
+			if (!_remove_failed_devices(state->cmd_lvscan,
+						    state->cmd_lvconvert,
+						    device))
 				/* FIXME Why are all the error return codes unused? Get rid of them? */
 				log_error("Failed to remove faulty devices in %s.",
 					  device);
@@ -176,10 +183,17 @@ int register_device(const char *device,
 	if (!dmeventd_lvm2_init_with_pool("mirror_state", state))
 		goto_bad;
 
-        /* CANNOT use --config as this disables cached content */
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvconvert, sizeof(state->cmd_lvconvert),
-				   "lvconvert --repair --use-policies", device))
+	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvscan, sizeof(state->cmd_lvscan),
+				   "lvscan --cache", device)) {
+		dmeventd_lvm2_exit_with_pool(state);
 		goto_bad;
+	}
+
+	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvconvert, sizeof(state->cmd_lvconvert),
+				   "lvconvert --repair --use-policies", device)) {
+		dmeventd_lvm2_exit_with_pool(state);
+		goto_bad;
+	}
 
 	*user = state;
 
@@ -189,9 +203,6 @@ int register_device(const char *device,
 bad:
 	log_error("Failed to monitor mirror %s.", device);
 
-	if (state)
-		dmeventd_lvm2_exit_with_pool(state);
-
 	return 0;
 }
 

daemons/dmeventd/plugins/raid/dmeventd_raid.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005-2017 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2005-2016 Red Hat, Inc. All rights reserved.
  *
  * This file is part of LVM2.
  *
@@ -22,6 +22,7 @@
 
 struct dso_state {
 	struct dm_pool *mem;
+	char cmd_lvscan[512];
 	char cmd_lvconvert[512];
 	uint64_t raid_devs[RAID_DEVS_ELEMS];
 	int failed;
@@ -37,7 +38,6 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
 	struct dm_status_raid *status;
 	const char *d;
 	int dead = 0, r = 1;
-	uint32_t dev;
 
 	if (!dm_get_status_raid(state->mem, params, &status)) {
 		log_error("Failed to process status line for %s.", device);
@@ -46,43 +46,24 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
 
 	d = status->dev_health;
 	while ((d = strchr(d, 'D'))) {
-		dev = (uint32_t)(d - status->dev_health);
+		uint32_t dev = (uint32_t)(d - status->dev_health);
 
-		if (!(state->raid_devs[dev / 64] & (UINT64_C(1) << (dev % 64)))) {
-			state->raid_devs[dev / 64] |= (UINT64_C(1) << (dev % 64));
-			log_warn("WARNING: Device #%u of %s array, %s, has failed.",
-				 dev, status->raid_type, device);
-		}
+		if (!(state->raid_devs[dev / 64] & (UINT64_C(1) << (dev % 64))))
+			log_error("Device #%u of %s array, %s, has failed.",
+				  dev, status->raid_type, device);
 
+		state->raid_devs[dev / 64] |= (UINT64_C(1) << (dev % 64));
 		d++;
 		dead = 1;
 	}
 
-	/*
-	 * if we are converting from non-RAID to RAID (e.g. linear -> raid1)
-	 * and too many original devices die, such that we cannot continue
-	 * the "recover" operation, the sync action will go to "idle", the
-	 * unsynced devs will remain at 'a', and the original devices will
-	 * NOT SWITCH TO 'D', but will remain at 'A' - hoping to be revived.
-	 *
-	 * This is simply the way the kernel works...
-	 */
-	if (!strcmp(status->sync_action, "idle") &&
-	    (status->dev_health[0] == 'a') &&
-	    (status->insync_regions < status->total_regions)) {
-		log_error("Primary sources for new RAID, %s, have failed.",
-			  device);
-		dead = 1; /* run it through LVM repair */
-	}
-
 	if (dead) {
 		if (status->insync_regions < status->total_regions) {
-			if (!state->warned) {
-				state->warned = 1;
+			if (!state->warned)
 				log_warn("WARNING: waiting for resynchronization to finish "
-					 "before initiating repair on RAID device %s.", device);
-			}
+					 "before initiating repair on RAID device %s", device);
 
+			state->warned = 1;
 			goto out; /* Not yet done syncing with accessible devices */
 		}
 
@@ -90,6 +71,8 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
 			goto out; /* already reported */
 
 		state->failed = 1;
+		if (!dmeventd_lvm2_run_with_lock(state->cmd_lvscan))
+			log_warn("WARNING: Re-scan of RAID device %s failed.", device);
 
 		/* if repair goes OK, report success even if lvscan has failed */
 		if (!dmeventd_lvm2_run_with_lock(state->cmd_lvconvert)) {
@@ -98,8 +81,6 @@ static int _process_raid_event(struct dso_state *state, char *params, const char
 		}
 	} else {
 		state->failed = 0;
-		if (status->insync_regions == status->total_regions)
-			memset(&state->raid_devs, 0, sizeof(state->raid_devs));
 		log_info("%s array, %s, is %s in-sync.",
 			 status->raid_type, device,
 			 (status->insync_regions == status->total_regions) ? "now" : "not");
@@ -152,9 +133,14 @@ int register_device(const char *device,
 	if (!dmeventd_lvm2_init_with_pool("raid_state", state))
 		goto_bad;
 
-	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvconvert, sizeof(state->cmd_lvconvert),
-				   "lvconvert --repair --use-policies", device))
+	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvscan, sizeof(state->cmd_lvscan),
+				   "lvscan --cache", device) ||
+	    !dmeventd_lvm2_command(state->mem, state->cmd_lvconvert, sizeof(state->cmd_lvconvert),
+				   "lvconvert --config devices{ignore_suspended_devices=1} "
+				   "--repair --use-policies", device)) {
+		dmeventd_lvm2_exit_with_pool(state);
 		goto_bad;
+	}
 
 	*user = state;
 
@@ -164,9 +150,6 @@ int register_device(const char *device,
 bad:
 	log_error("Failed to monitor RAID %s.", device);
 
-	if (state)
-		dmeventd_lvm2_exit_with_pool(state);
-
 	return 0;
 }
 

daemons/dmeventd/plugins/snapshot/dmeventd_snapshot.c

@@ -231,7 +231,7 @@ void process_event(struct dm_task *dmt,
 
 		if (percent >= WARNING_THRESH) /* Print a warning to syslog. */
 			log_warn("WARNING: Snapshot %s is now %.2f%% full.",
-				 device, dm_percent_to_round_float(percent, 2));
+				 device, dm_percent_to_float(percent));
 
 		/* Try to extend the snapshot, in accord with user-set policies */
 		if (!_extend(state->cmd_lvextend))
@@ -254,8 +254,10 @@ int register_device(const char *device,
 
 	if (!dmeventd_lvm2_command(state->mem, state->cmd_lvextend,
 				   sizeof(state->cmd_lvextend),
-				   "lvextend --use-policies", device))
+				   "lvextend --use-policies", device)) {
+		dmeventd_lvm2_exit_with_pool(state);
 		goto_bad;
+	}
 
 	state->percent_check = CHECK_MINIMUM;
 	*user = state;
@@ -266,9 +268,6 @@ int register_device(const char *device,
 bad:
 	log_error("Failed to monitor snapshot %s.", device);
 
-	if (state)
-		dmeventd_lvm2_exit_with_pool(state);
-
 	return 0;
 }
 

daemons/dmeventd/plugins/thin/dmeventd_thin.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2011-2017 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2011-2016 Red Hat, Inc. All rights reserved.
  *
  * This file is part of LVM2.
  *
@@ -18,6 +18,7 @@
 
 #include <sys/wait.h>
 #include <stdarg.h>
+#include <pthread.h>
 
 /* TODO - move this mountinfo code into library to be reusable */
 #ifdef __linux__
@@ -39,120 +40,277 @@
 
 #define UMOUNT_COMMAND "/bin/umount"
 
-#define MAX_FAILS	(256)  /* ~42 mins between cmd call retry with 10s delay */
+#define MAX_FAILS	(10)
 
 #define THIN_DEBUG 0
 
 struct dso_state {
 	struct dm_pool *mem;
 	int metadata_percent_check;
-	int metadata_percent;
 	int data_percent_check;
-	int data_percent;
 	uint64_t known_metadata_size;
 	uint64_t known_data_size;
 	unsigned fails;
-	unsigned max_fails;
-	int restore_sigset;
-	sigset_t old_sigset;
-	pid_t pid;
-	char *argv[3];
-	char *cmd_str;
+	char cmd_str[1024];
 };
 
 DM_EVENT_LOG_FN("thin")
 
 #define UUID_PREFIX "LVM-"
 
-static int _run_command(struct dso_state *state)
+/* Figure out device UUID has LVM- prefix and is OPEN */
+static int _has_unmountable_prefix(int major, int minor)
 {
-	char val[3][36];
-	char *env[] = { val[0], val[1], val[2], NULL };
-	int i;
+	struct dm_task *dmt;
+	struct dm_info info;
+	const char *uuid;
+	int r = 0;
 
-	/* Mark for possible lvm2 command we are running from dmeventd
-	 * lvm2 will not try to talk back to dmeventd while processing it */
-	(void) dm_snprintf(val[0], sizeof(val[0]), "LVM_RUN_BY_DMEVENTD=1");
+	if (!(dmt = dm_task_create(DM_DEVICE_INFO)))
+		return_0;
 
-	if (state->data_percent) {
-		/* Prepare some known data to env vars for easy use */
-		(void) dm_snprintf(val[1], sizeof(val[1]), "DMEVENTD_THIN_POOL_DATA=%d",
-				   state->data_percent / DM_PERCENT_1);
-		(void) dm_snprintf(val[2], sizeof(val[2]), "DMEVENTD_THIN_POOL_METADATA=%d",
-				   state->metadata_percent / DM_PERCENT_1);
-	} else {
-		/* For an error event it's for a user to check status and decide */
-		env[1] = NULL;
-		log_debug("Error event processing.");
+	if (!dm_task_set_major_minor(dmt, major, minor, 1))
+		goto_out;
+
+	if (!dm_task_no_flush(dmt))
+		stack;
+
+	if (!dm_task_run(dmt))
+		goto out;
+
+	if (!dm_task_get_info(dmt, &info))
+		goto out;
+
+	if (!info.exists || !info.open_count)
+		goto out; /* Not open -> not mounted */
+
+	if (!(uuid = dm_task_get_uuid(dmt)))
+		goto out;
+
+	/* Check it's public mountable LV
+	 * has prefix  LVM-  and UUID size is 68 chars */
+	if (memcmp(uuid, UUID_PREFIX, sizeof(UUID_PREFIX) - 1) ||
+	    strlen(uuid) != 68)
+		goto out;
+
+#if THIN_DEBUG
+	log_debug("Found logical volume %s (%u:%u).", uuid, major, minor);
+#endif
+	r = 1;
+out:
+	dm_task_destroy(dmt);
+
+	return r;
+}
+
+/* Get dependencies for device, and try to find matching device */
+static int _has_deps(const char *name, int tp_major, int tp_minor, int *dev_minor)
+{
+	struct dm_task *dmt;
+	const struct dm_deps *deps;
+	struct dm_info info;
+	int major, minor;
+	int r = 0;
+
+	if (!(dmt = dm_task_create(DM_DEVICE_DEPS)))
+		return 0;
+
+	if (!dm_task_set_name(dmt, name))
+		goto out;
+
+	if (!dm_task_no_open_count(dmt))
+		goto out;
+
+	if (!dm_task_run(dmt))
+		goto out;
+
+	if (!dm_task_get_info(dmt, &info))
+		goto out;
+
+	if (!(deps = dm_task_get_deps(dmt)))
+		goto out;
+
+	if (!info.exists || deps->count != 1)
+		goto out;
+
+	major = (int) MAJOR(deps->device[0]);
+	minor = (int) MINOR(deps->device[0]);
+	if ((major != tp_major) || (minor != tp_minor))
+		goto out;
+
+	*dev_minor = info.minor;
+
+	if (!_has_unmountable_prefix(major, info.minor))
+		goto out;
+
+#if THIN_DEBUG
+	{
+		char dev_name[PATH_MAX];
+		if (dm_device_get_name(major, minor, 0, dev_name, sizeof(dev_name)))
+			log_debug("Found %s (%u:%u) depends on %s.",
+				  name, major, *dev_minor, dev_name);
+	}
+#endif
+	r = 1;
+out:
+	dm_task_destroy(dmt);
+
+	return r;
+}
+
+/* Get all active devices */
+static int _find_all_devs(dm_bitset_t bs, int tp_major, int tp_minor)
+{
+	struct dm_task *dmt;
+	struct dm_names *names;
+	unsigned next = 0;
+	int minor, r = 1;
+
+	if (!(dmt = dm_task_create(DM_DEVICE_LIST)))
+		return 0;
+
+	if (!dm_task_run(dmt)) {
+		r = 0;
+		goto out;
 	}
 
-	log_verbose("Executing command: %s", state->cmd_str);
+	if (!(names = dm_task_get_names(dmt))) {
+		r = 0;
+		goto out;
+	}
 
-	/* TODO:
-	 *   Support parallel run of 'task' and it's waitpid maintainence
-	 *   ATM we can't handle signaling of  SIGALRM
-	 *   as signalling is not allowed while 'process_event()' is running
-	 */
-	if (!(state->pid = fork())) {
-		/* child */
-		(void) close(0);
-		for (i = 3; i < 255; ++i) (void) close(i);
-		execve(state->argv[0], state->argv, env);
-		_exit(errno);
-	} else if (state->pid == -1) {
-		log_error("Can't fork command %s.", state->cmd_str);
-		state->fails = 1;
-		return 0;
+	if (!names->dev)
+		goto out;
+
+	do {
+		names = (struct dm_names *)((char *) names + next);
+		if (_has_deps(names->name, tp_major, tp_minor, &minor))
+			dm_bit_set(bs, minor);
+		next = names->next;
+	} while (next);
+
+out:
+	dm_task_destroy(dmt);
+
+	return r;
+}
+
+static int _run(const char *cmd, ...)
+{
+	va_list ap;
+	int argc = 1; /* for argv[0], i.e. cmd */
+	int i = 0;
+	const char **argv;
+	pid_t pid = fork();
+	int status;
+
+	if (pid == 0) { /* child */
+		va_start(ap, cmd);
+		while (va_arg(ap, const char *))
+			++argc;
+		va_end(ap);
+
+		/* + 1 for the terminating NULL */
+		argv = alloca(sizeof(const char *) * (argc + 1));
+
+		argv[0] = cmd;
+		va_start(ap, cmd);
+		while ((argv[++i] = va_arg(ap, const char *)));
+		va_end(ap);
+
+		execvp(cmd, (char **)argv);
+		log_sys_error("exec", cmd);
+		exit(127);
+	}
+
+	if (pid > 0) { /* parent */
+		if (waitpid(pid, &status, 0) != pid)
+			return 0; /* waitpid failed */
+		if (!WIFEXITED(status) || WEXITSTATUS(status))
+			return 0; /* the child failed */
+	}
+
+	if (pid < 0)
+		return 0; /* fork failed */
+
+	return 1; /* all good */
+}
+
+struct mountinfo_s {
+	const char *device;
+	struct dm_info info;
+	dm_bitset_t minors; /* Bitset for active thin pool minors */
+};
+
+static int _umount_device(char *buffer, unsigned major, unsigned minor,
+			  char *target, void *cb_data)
+{
+	struct mountinfo_s *data = cb_data;
+	char *words[10];
+
+	if ((major == data->info.major) && dm_bit(data->minors, minor)) {
+		if (dm_split_words(buffer, DM_ARRAY_SIZE(words), 0, words) < DM_ARRAY_SIZE(words))
+			words[9] = NULL; /* just don't show device name */
+		log_info("Unmounting thin %s (%d:%d) of thin pool %s (%u:%u) from mount point \"%s\".",
+			 words[9] ? : "", major, minor, data->device,
+			 data->info.major, data->info.minor,
+			 target);
+		if (!_run(UMOUNT_COMMAND, "-fl", target, NULL))
+			log_error("Failed to lazy umount thin %s (%d:%d) from %s: %s.",
+				  words[9], major, minor, target, strerror(errno));
 	}
 
 	return 1;
 }
 
+/*
+ * Find all thin pool LV users and try to umount them.
+ * TODO: work with read-only thin pool support
+ */
+static void _umount(struct dm_task *dmt)
+{
+	/* TODO: Convert to use hash to reduce memory usage */
+	static const size_t MINORS = (1U << 20); /* 20 bit */
+	struct mountinfo_s data = { NULL };
+
+	if (!dm_task_get_info(dmt, &data.info))
+		return;
+
+	data.device = dm_task_get_name(dmt);
+
+	if (!(data.minors = dm_bitset_create(NULL, MINORS))) {
+		log_error("Failed to allocate bitset. Not unmounting %s.", data.device);
+		goto out;
+	}
+
+	if (!_find_all_devs(data.minors, data.info.major, data.info.minor)) {
+		log_error("Failed to detect mounted volumes for %s.", data.device);
+		goto out;
+	}
+
+	if (!dm_mountinfo_read(_umount_device, &data)) {
+		log_error("Could not parse mountinfo file.");
+		goto out;
+	}
+
+out:
+	if (data.minors)
+		dm_bitset_destroy(data.minors);
+}
+
 static int _use_policy(struct dm_task *dmt, struct dso_state *state)
 {
 #if THIN_DEBUG
 	log_debug("dmeventd executes: %s.", state->cmd_str);
 #endif
-	if (state->argv[0])
-		return _run_command(state);
-
 	if (!dmeventd_lvm2_run_with_lock(state->cmd_str)) {
-		log_error("Failed command for %s.", dm_task_get_name(dmt));
-		state->fails = 1;
+		log_error("Failed to extend thin pool %s.",
+			  dm_task_get_name(dmt));
+		state->fails++;
 		return 0;
 	}
 
 	state->fails = 0;
-
-	return 1;
-}
-
-/* Check if executed command has finished
- * Only 1 command may run */
-static int _wait_for_pid(struct dso_state *state)
-{
-	int status = 0;
-
-	if (state->pid == -1)
-		return 1;
-
-	if (!waitpid(state->pid, &status, WNOHANG))
-		return 0;
-
-	/* Wait for finish */
-	if (WIFEXITED(status)) {
-		log_verbose("Child %d exited with status %d.",
-			    state->pid, WEXITSTATUS(status));
-		state->fails = WEXITSTATUS(status) ? 1 : 0;
-	} else {
-		if (WIFSIGNALED(status))
-			log_verbose("Child %d was terminated with status %d.",
-				    state->pid, WTERMSIG(status));
-		state->fails = 1;
-	}
-
-	state->pid = -1;
-
 	return 1;
 }
 
@@ -161,6 +319,7 @@ void process_event(struct dm_task *dmt,
 		   void **user)
 {
 	const char *device = dm_task_get_name(dmt);
+	int percent;
 	struct dso_state *state = *user;
 	struct dm_status_thin_pool *tps = NULL;
 	void *next = NULL;
@@ -168,48 +327,25 @@ void process_event(struct dm_task *dmt,
 	char *target_type = NULL;
 	char *params;
 	int needs_policy = 0;
-	struct dm_task *new_dmt = NULL;
+	int needs_umount = 0;
 
 #if THIN_DEBUG
 	log_debug("Watch for tp-data:%.2f%%  tp-metadata:%.2f%%.",
-		  dm_percent_to_round_float(state->data_percent_check, 2),
-		  dm_percent_to_round_float(state->metadata_percent_check, 2));
+		  dm_percent_to_float(state->data_percent_check),
+		  dm_percent_to_float(state->metadata_percent_check));
 #endif
-	if (!_wait_for_pid(state)) {
-		log_warn("WARNING: Skipping event, child %d is still running (%s).",
-			 state->pid, state->cmd_str);
-		return;
-	}
 
+#if 0
+	/* No longer monitoring, waiting for remove */
+	if (!state->meta_percent_check && !state->data_percent_check)
+		return;
+#endif
 	if (event & DM_EVENT_DEVICE_ERROR) {
 		/* Error -> no need to check and do instant resize */
-		state->data_percent = state->metadata_percent = 0;
 		if (_use_policy(dmt, state))
 			goto out;
 
 		stack;
-
-		/*
-		 * Rather update oldish status
-		 * since after 'command' processing
-		 * percentage info could have changed a lot.
-		 * If we would get above UMOUNT_THRESH
-		 * we would wait for next sigalarm.
-		 */
-		if (!(new_dmt = dm_task_create(DM_DEVICE_STATUS)))
-			goto_out;
-
-		if (!dm_task_set_uuid(new_dmt, dm_task_get_uuid(dmt)))
-			goto_out;
-
-		/* Non-blocking status read */
-		if (!dm_task_no_flush(new_dmt))
-			log_warn("WARNING: Can't set no_flush for dm status.");
-
-		if (!dm_task_run(new_dmt))
-			goto_out;
-
-		dmt = new_dmt;
 	}
 
 	dm_get_next_target(dmt, next, &start, &length, &target_type, &params);
@@ -221,6 +357,7 @@ void process_event(struct dm_task *dmt,
 
 	if (!dm_get_status_thin_pool(state->mem, params, &tps)) {
 		log_error("Failed to parse status.");
+		needs_umount = 1;
 		goto out;
 	}
 
@@ -235,110 +372,67 @@ void process_event(struct dm_task *dmt,
 	if (state->known_metadata_size != tps->total_metadata_blocks) {
 		state->metadata_percent_check = CHECK_MINIMUM;
 		state->known_metadata_size = tps->total_metadata_blocks;
-		state->fails = 0;
 	}
 
 	if (state->known_data_size != tps->total_data_blocks) {
 		state->data_percent_check = CHECK_MINIMUM;
 		state->known_data_size = tps->total_data_blocks;
-		state->fails = 0;
 	}
 
-	/*
-	 * Trigger action when threshold boundary is exceeded.
-	 * Report 80% threshold warning when it's used above 80%.
-	 * Only 100% is exception as it cannot be surpased so policy
-	 * action is called for:  >50%, >55% ... >95%, 100%
-	 */
-	state->metadata_percent = dm_make_percent(tps->used_metadata_blocks, tps->total_metadata_blocks);
-	if ((state->metadata_percent > WARNING_THRESH) &&
-	    (state->metadata_percent > state->metadata_percent_check))
-		log_warn("WARNING: Thin pool %s metadata is now %.2f%% full.",
-			 device, dm_percent_to_round_float(state->metadata_percent, 2));
-	if (state->metadata_percent > CHECK_MINIMUM) {
-		/* Run action when usage raised more than CHECK_STEP since the last time */
-		if (state->metadata_percent > state->metadata_percent_check)
-			needs_policy = 1;
-		state->metadata_percent_check = (state->metadata_percent / CHECK_STEP + 1) * CHECK_STEP;
-		if (state->metadata_percent_check == DM_PERCENT_100)
-			state->metadata_percent_check--; /* Can't get bigger then 100% */
-	} else
-		state->metadata_percent_check = CHECK_MINIMUM;
+	percent = dm_make_percent(tps->used_metadata_blocks, tps->total_metadata_blocks);
+	if (percent >= state->metadata_percent_check) {
+		/*
+		 * Usage has raised more than CHECK_STEP since the last
+		 * time. Run actions.
+		 */
+		state->metadata_percent_check = (percent / CHECK_STEP) * CHECK_STEP + CHECK_STEP;
 
-	state->data_percent = dm_make_percent(tps->used_data_blocks, tps->total_data_blocks);
-	if ((state->data_percent > WARNING_THRESH) &&
-	    (state->data_percent > state->data_percent_check))
-		log_warn("WARNING: Thin pool %s data is now %.2f%% full.",
-			 device, dm_percent_to_round_float(state->data_percent, 2));
-	if (state->data_percent > CHECK_MINIMUM) {
-		/* Run action when usage raised more than CHECK_STEP since the last time */
-		if (state->data_percent > state->data_percent_check)
-			needs_policy = 1;
-		state->data_percent_check = (state->data_percent / CHECK_STEP + 1) * CHECK_STEP;
-		if (state->data_percent_check == DM_PERCENT_100)
-			state->data_percent_check--; /* Can't get bigger then 100% */
-	} else
-		state->data_percent_check = CHECK_MINIMUM;
+		/* FIXME: extension of metadata needs to be written! */
+		if (percent >= WARNING_THRESH) /* Print a warning to syslog. */
+			log_warn("WARNING: Thin pool %s metadata is now %.2f%% full.",
+				 device, dm_percent_to_float(percent));
+		needs_policy = 1;
 
-	/* Reduce number of _use_policy() calls by power-of-2 factor till frequency of MAX_FAILS is reached.
-	 * Avoids too high number of error retries, yet shows some status messages in log regularly.
-	 * i.e. PV could have been pvmoved and VG/LV was locked for a while...
-	 */
-	if (state->fails) {
-		if (state->fails++ <= state->max_fails) {
-			log_debug("Postponing frequently failing policy (%u <= %u).",
-				  state->fails - 1, state->max_fails);
-			return;
-		}
-		if (state->max_fails < MAX_FAILS)
-			state->max_fails <<= 1;
-		state->fails = needs_policy = 1; /* Retry failing command */
-	} else
-		state->max_fails = 1; /* Reset on success */
+		if (percent >= UMOUNT_THRESH)
+			needs_umount = 1;
+	}
 
-	if (needs_policy)
-		_use_policy(dmt, state);
+	percent = dm_make_percent(tps->used_data_blocks, tps->total_data_blocks);
+	if (percent >= state->data_percent_check) {
+		/*
+		 * Usage has raised more than CHECK_STEP since
+		 * the last time. Run actions.
+		 */
+		state->data_percent_check = (percent / CHECK_STEP) * CHECK_STEP + CHECK_STEP;
+
+		if (percent >= WARNING_THRESH) /* Print a warning to syslog. */
+			log_warn("WARNING: Thin pool %s data is now %.2f%% full.",
+				 device, dm_percent_to_float(percent));
+		needs_policy = 1;
+
+		if (percent >= UMOUNT_THRESH)
+			needs_umount = 1;
+	}
+
+	if (needs_policy &&
+	    _use_policy(dmt, state))
+		needs_umount = 0; /* No umount when command was successful */
 out:
+	if (needs_umount) {
+		_umount(dmt);
+		/* Until something changes, do not retry any more actions */
+		state->data_percent_check = state->metadata_percent_check = (DM_PERCENT_1 * 101);
+	}
+
 	if (tps)
 		dm_pool_free(state->mem, tps);
 
-	if (new_dmt)
-		dm_task_destroy(new_dmt);
-}
-
-/* Handle SIGCHLD for a thread */
-static void _sig_child(int signum __attribute__((unused)))
-{
-	/* empty SIG_IGN */;
-}
-
-/* Setup handler for SIGCHLD when executing external command
- * to get quick 'waitpid()' reaction
- * It will interrupt syscall just like SIGALRM and
- * invoke process_event().
- */
-static void _init_thread_signals(struct dso_state *state)
-{
-	struct sigaction act = { .sa_handler = _sig_child };
-	sigset_t my_sigset;
-
-	sigemptyset(&my_sigset);
-
-	if (sigaction(SIGCHLD, &act, NULL))
-		log_warn("WARNING: Failed to set SIGCHLD action.");
-	else if (sigaddset(&my_sigset, SIGCHLD))
-		log_warn("WARNING: Failed to add SIGCHLD to set.");
-	else if (pthread_sigmask(SIG_UNBLOCK, &my_sigset, &state->old_sigset))
-		log_warn("WARNING: Failed to unblock SIGCHLD.");
-	else
-		state->restore_sigset = 1;
-}
-
-static void _restore_thread_signals(struct dso_state *state)
-{
-	if (state->restore_sigset &&
-	    pthread_sigmask(SIG_SETMASK, &state->old_sigset, NULL))
-		log_warn("WARNING: Failed to block SIGCHLD.");
+	if (state->fails >= MAX_FAILS) {
+		log_warn("WARNING: Dropping monitoring of %s. "
+			 "lvm2 command fails too often (%u times in row).",
+			 device, state->fails);
+		pthread_kill(pthread_self(), SIGALRM);
+	}
 }
 
 int register_device(const char *device,
@@ -348,56 +442,28 @@ int register_device(const char *device,
 		    void **user)
 {
 	struct dso_state *state;
-	char *str;
-	char cmd_str[PATH_MAX + 128 + 2]; /* cmd ' ' vg/lv \0 */
 
 	if (!dmeventd_lvm2_init_with_pool("thin_pool_state", state))
 		goto_bad;
 
-	if (!dmeventd_lvm2_command(state->mem, cmd_str, sizeof(cmd_str),
-				   "_dmeventd_thin_command", device))
+	if (!dmeventd_lvm2_command(state->mem, state->cmd_str,
+				   sizeof(state->cmd_str),
+				   "lvextend --use-policies",
+				   device)) {
+		dmeventd_lvm2_exit_with_pool(state);
 		goto_bad;
+	}
 
-	if (strncmp(cmd_str, "lvm ", 4) == 0) {
-		if (!(state->cmd_str = dm_pool_strdup(state->mem, cmd_str + 4))) {
-			log_error("Failed to copy lvm command.");
-			goto bad;
-		}
-	} else if (cmd_str[0] == '/') {
-		if (!(state->cmd_str = dm_pool_strdup(state->mem, cmd_str))) {
-			log_error("Failed to copy thin command.");
-			goto bad;
-		}
-
-		/* Find last space before 'vg/lv' */
-		if (!(str = strrchr(state->cmd_str, ' ')))
-			goto inval;
-
-		if (!(state->argv[0] = dm_pool_strndup(state->mem, state->cmd_str,
-						       str - state->cmd_str))) {
-			log_error("Failed to copy command.");
-			goto bad;
-		}
-
-		state->argv[1] = str + 1;  /* 1 argument - vg/lv */
-		_init_thread_signals(state);
-	} else /* Unuspported command format */
-		goto inval;
-
-	state->pid = -1;
+	state->metadata_percent_check = CHECK_MINIMUM;
+	state->data_percent_check = CHECK_MINIMUM;
 	*user = state;
 
 	log_info("Monitoring thin pool %s.", device);
 
 	return 1;
-inval:
-	log_error("Invalid command for monitoring: %s.", cmd_str);
 bad:
 	log_error("Failed to monitor thin pool %s.", device);
 
-	if (state)
-		dmeventd_lvm2_exit_with_pool(state);
-
 	return 0;
 }
 
@@ -408,28 +474,6 @@ int unregister_device(const char *device,
 		      void **user)
 {
 	struct dso_state *state = *user;
-	int i;
-
-	for (i = 0; !_wait_for_pid(state) && (i < 6); ++i) {
-		if (i == 0)
-			/* Give it 2 seconds, then try to terminate & kill it */
-			log_verbose("Child %d still not finished (%s) waiting.",
-				    state->pid, state->cmd_str);
-		else if (i == 3) {
-			log_warn("WARNING: Terminating child %d.", state->pid);
-			kill(state->pid, SIGINT);
-			kill(state->pid, SIGTERM);
-		} else if (i == 5) {
-			log_warn("WARNING: Killing child %d.", state->pid);
-			kill(state->pid, SIGKILL);
-		}
-		sleep(1);
-	}
-
-	if (state->pid != -1)
-		log_warn("WARNING: Cannot kill child %d!", state->pid);
-
-	_restore_thread_signals(state);
 
 	dmeventd_lvm2_exit_with_pool(state);
 	log_info("No longer monitoring thin pool %s.", device);

daemons/dmfilemapd/.gitignore

@@ -1 +0,0 @@
-dmfilemapd

daemons/dmfilemapd/Makefile.in

@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2016 Red Hat, Inc. All rights reserved.
-#
-# This file is part of the device-mapper userspace tools.
-#
-# This copyrighted material is made available to anyone wishing to use,
-# modify, copy, or redistribute it subject to the terms and conditions
-# of the GNU Lesser General Public License v.2.1.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = @top_builddir@
-
-SOURCES = dmfilemapd.c
-
-TARGETS = dmfilemapd
-
-.PHONY: install_dmfilemapd install_dmfilemapd_static
-
-INSTALL_DMFILEMAPD_TARGETS = install_dmfilemapd_dynamic
-
-CLEAN_TARGETS = dmfilemapd.static
-
-CFLOW_LIST = $(SOURCES)
-CFLOW_LIST_TARGET = $(LIB_NAME).cflow
-CFLOW_TARGET = dmfilemapd
-
-include $(top_builddir)/make.tmpl
-
-all: device-mapper
-device-mapper: $(TARGETS)
-
-CFLAGS_dmfilemapd.o += $(EXTRA_EXEC_CFLAGS)
-LIBS += -ldevmapper
-
-dmfilemapd: $(LIB_SHARED) dmfilemapd.o
-	$(CC) $(CFLAGS) $(LDFLAGS) $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS) \
-		-o $@ dmfilemapd.o $(DL_LIBS) $(LIBS)
-
-dmfilemapd.static: $(LIB_STATIC) dmfilemapd.o $(interfacebuilddir)/libdevmapper.a
-	$(CC) $(CFLAGS) $(LDFLAGS) $(ELDFLAGS) -static -L$(interfacebuilddir) \
-		-o $@ dmfilemapd.o $(DL_LIBS) $(LIBS) $(STATIC_LIBS)
-
-ifneq ("$(CFLOW_CMD)", "")
-CFLOW_SOURCES = $(addprefix $(srcdir)/, $(SOURCES))
--include $(top_builddir)/libdm/libdevmapper.cflow
--include $(top_builddir)/lib/liblvm-internal.cflow
--include $(top_builddir)/lib/liblvm2cmd.cflow
--include $(top_builddir)/daemons/dmfilemapd/$(LIB_NAME).cflow
-endif
-
-install_dmfilemapd_dynamic: dmfilemapd
-	$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)
-
-install_dmfilemapd_static: dmfilemapd.static
-	$(INSTALL_PROGRAM) -D $< $(staticdir)/$(<F)
-
-install_dmfilemapd: $(INSTALL_DMFILEMAPD_TARGETS)
-
-install: install_dmfilemapd
-
-install_device-mapper: install_dmfilemapd

daemons/dmfilemapd/dmfilemapd.c

@@ -1,834 +0,0 @@
-/*
- * Copyright (C) 2016 Red Hat, Inc. All rights reserved.
- *
- * This file is part of the device-mapper userspace tools.
- *
- * It includes tree drawing code based on pstree: http://psmisc.sourceforge.net/
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "tool.h"
-
-#include "dm-logging.h"
-
-#include "defaults.h"
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/inotify.h>
-#include <dirent.h>
-#include <ctype.h>
-
-#ifdef __linux__
-#  include "kdev_t.h"
-#else
-#  define MAJOR(x) major((x))
-#  define MINOR(x) minor((x))
-#  define MKDEV(x,y) makedev((x),(y))
-#endif
-
-/* limit to two updates/sec */
-#define FILEMAPD_WAIT_USECS 500000
-
-/* how long to wait for unlinked files */
-#define FILEMAPD_NOFILE_WAIT_USECS 100000
-#define FILEMAPD_NOFILE_WAIT_TRIES 10
-
-struct filemap_monitor {
-	dm_filemapd_mode_t mode;
-	const char *program_id;
-	uint64_t group_id;
-	char *path;
-	int fd;
-
-	int inotify_fd;
-	int inotify_watch_fd;
-
-	/* monitoring heuristics */
-	int64_t blocks; /* allocated blocks, from stat.st_blocks */
-	uint64_t nr_regions;
-	int deleted;
-};
-
-static int _foreground;
-static int _verbose;
-
-const char *const _usage = "dmfilemapd <fd> <group_id> <abs_path> <mode> "
-			   "[<foreground>[<log_level>]]";
-
-/*
- * Daemon logging. By default, all messages are thrown away: messages
- * are only written to the terminal if the daemon is run in the foreground.
- */
-__attribute__((format(printf, 5, 0)))
-static void _dmfilemapd_log_line(int level,
-				 const char *file __attribute__((unused)),
-				 int line __attribute__((unused)),
-				 int dm_errno_or_class,
-				 const char *f, va_list ap)
-{
-	static int _abort_on_internal_errors = -1;
-	FILE *out = log_stderr(level) ? stderr : stdout;
-
-	level = log_level(level);
-
-	if (level <= _LOG_WARN || _verbose) {
-		if (level < _LOG_WARN)
-			out = stderr;
-		vfprintf(out, f, ap);
-		fputc('\n', out);
-	}
-
-	if (_abort_on_internal_errors < 0)
-		/* Set when env DM_ABORT_ON_INTERNAL_ERRORS is not "0" */
-		_abort_on_internal_errors =
-			strcmp(getenv("DM_ABORT_ON_INTERNAL_ERRORS") ? : "0", "0");
-
-	if (_abort_on_internal_errors &&
-	    !strncmp(f, INTERNAL_ERROR, sizeof(INTERNAL_ERROR) - 1))
-		abort();
-}
-
-__attribute__((format(printf, 5, 6)))
-static void _dmfilemapd_log_with_errno(int level,
-				       const char *file, int line,
-				       int dm_errno_or_class,
-				       const char *f, ...)
-{
-	va_list ap;
-
-	va_start(ap, f);
-	_dmfilemapd_log_line(level, file, line, dm_errno_or_class, f, ap);
-	va_end(ap);
-}
-
-/*
- * Only used for reporting errors before daemonise().
- */
-__attribute__((format(printf, 1, 2)))
-static void _early_log(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	vfprintf(stderr, fmt, ap);
-	fputc('\n', stderr);
-	va_end(ap);
-}
-
-static void _setup_logging(void)
-{
-	dm_log_init_verbose(_verbose - 1);
-	dm_log_with_errno_init(_dmfilemapd_log_with_errno);
-}
-
-#define PROC_FD_DELETED_STR "(deleted)"
-/*
- * Scan the /proc/<pid>/fd directory for pid and check for an fd
- * symlink whose contents match path.
- */
-static int _is_open_in_pid(pid_t pid, const char *path)
-{
-	char deleted_path[PATH_MAX + sizeof(PROC_FD_DELETED_STR)];
-	struct dirent *pid_dp = NULL;
-	char path_buf[PATH_MAX];
-	char link_buf[PATH_MAX];
-	DIR *pid_d = NULL;
-	ssize_t len;
-
-	if (pid == getpid())
-		return 0;
-
-	if (dm_snprintf(path_buf, sizeof(path_buf),
-			DEFAULT_PROC_DIR "%d/fd", pid) < 0) {
-		log_error("Could not format pid path.");
-		return 0;
-	}
-
-	/*
-	 * Test for the kernel 'file (deleted)' form when scanning.
-	 */
-	if (dm_snprintf(deleted_path, sizeof(deleted_path), "%s %s",
-			path, PROC_FD_DELETED_STR) < 0) {
-		log_error("Could not format check path.");
-		return 0;
-	}
-
-	pid_d = opendir(path_buf);
-	if (!pid_d) {
-		log_error("Could not open proc path: %s.", path_buf);
-		return 0;
-	}
-
-	while ((pid_dp = readdir(pid_d)) != NULL) {
-		if (pid_dp->d_name[0] == '.')
-			continue;
-		if ((len = readlinkat(dirfd(pid_d), pid_dp->d_name, link_buf,
-				      sizeof(link_buf))) < 0) {
-			log_error("readlink failed for " DEFAULT_PROC_DIR
-				  "/%d/fd/.", pid);
-			goto bad;
-		}
-		link_buf[len] = '\0';
-		if (!strcmp(deleted_path, link_buf)) {
-			if (closedir(pid_d))
-				log_sys_error("closedir", path_buf);
-			return 1;
-		}
-	}
-
-bad:
-	if (closedir(pid_d))
-		log_sys_error("closedir", path_buf);
-
-	return 0;
-}
-
-/*
- * Attempt to determine whether a file is open by any process by
- * scanning symbolic links in /proc/<pid>/fd.
- *
- * This is a heuristic since it cannot guarantee to detect brief
- * access in all cases: a process that opens and then closes the
- * file rapidly may never be seen by the scan.
- *
- * The method will also give false-positives if a process exists
- * that has a deleted file open that had the same path, but a
- * different inode number, to the file being monitored.
- *
- * For this reason the daemon only uses _is_open() for unlinked
- * files when the mode is DM_FILEMAPD_FOLLOW_INODE, since these
- * files can no longer be newly opened by processes.
- *
- * In this situation !is_open(path) provides an indication that
- * the daemon should shut down: the file has been unlinked from
- * the file system and we appear to hold the final reference.
- */
-static int _is_open(const char *path)
-{
-	struct dirent *proc_dp = NULL;
-	DIR *proc_d = NULL;
-	pid_t pid;
-
-	proc_d = opendir(DEFAULT_PROC_DIR);
-	if (!proc_d)
-		return 0;
-	while ((proc_dp = readdir(proc_d)) != NULL) {
-		if (!isdigit(proc_dp->d_name[0]))
-			continue;
-		errno = 0;
-		pid = (pid_t) strtol(proc_dp->d_name, NULL, 10);
-		if (errno || !pid)
-			continue;
-		if (_is_open_in_pid(pid, path)) {
-			if (closedir(proc_d))
-				log_sys_error("closedir", DEFAULT_PROC_DIR);
-			return 1;
-		}
-	}
-
-	if (closedir(proc_d))
-		log_sys_error("closedir", DEFAULT_PROC_DIR);
-
-	return 0;
-}
-
-static void _filemap_monitor_wait(uint64_t usecs)
-{
-	if (_verbose) {
-		if (usecs == FILEMAPD_WAIT_USECS)
-			log_very_verbose("Waiting for check interval");
-		if (usecs == FILEMAPD_NOFILE_WAIT_USECS)
-			log_very_verbose("Waiting for unlinked path");
-	}
-	usleep((useconds_t) usecs);
-}
-
-static int _parse_args(int argc, char **argv, struct filemap_monitor *fm)
-{
-	char *endptr;
-
-	/* we don't care what is in argv[0]. */
-	argc--;
-	argv++;
-
-	if (argc < 5) {
-		_early_log("Wrong number of arguments.");
-		_early_log("usage: %s", _usage);
-		return 0;
-	}
-
-	/*
-	 * We don't know the true nr_regions at daemon start time,
-	 * and it is not worth a dm_stats_list()/group walk to count:
-	 * we can assume that there is at least one region or the
-	 * daemon would not have been started.
-	 *
-	 * A correct value will be obtained following the first update
-	 * of the group's regions.
-	 */
-	fm->nr_regions = 1;
-
-	/* parse <fd> */
-	errno = 0;
-	fm->fd = (int) strtol(argv[0], &endptr, 10);
-	if (errno || *endptr) {
-		_early_log("Could not parse file descriptor: %s", argv[0]);
-		return 0;
-	}
-
-	argc--;
-	argv++;
-
-	/* parse <group_id> */
-	errno = 0;
-	fm->group_id = strtoull(argv[0], &endptr, 10);
-	if (*endptr || errno) {
-		_early_log("Could not parse group identifier: %s", argv[0]);
-		return 0;
-	}
-
-	argc--;
-	argv++;
-
-	/* parse <path> */
-	if (!argv[0] || !strlen(argv[0])) {
-		_early_log("Path argument is required.");
-		return 0;
-	}
-
-	if (*argv[0] != '/') {
-		_early_log("Path argument must specify an absolute path.");
-		return 0;
-	}
-
-	fm->path = dm_strdup(argv[0]);
-	if (!fm->path) {
-		_early_log("Could not allocate memory for path argument.");
-		return 0;
-	}
-
-	argc--;
-	argv++;
-
-	/* parse <mode> */
-	if (!argv[0] || !strlen(argv[0])) {
-		_early_log("Mode argument is required.");
-		return 0;
-	}
-
-	fm->mode = dm_filemapd_mode_from_string(argv[0]);
-	if (fm->mode == DM_FILEMAPD_FOLLOW_NONE)
-		return 0;
-
-	argc--;
-	argv++;
-
-	/* parse [<foreground>[<verbose>]] */
-	if (argc) {
-		errno = 0;
-		_foreground = (int) strtol(argv[0], &endptr, 10);
-		if (errno || *endptr) {
-			_early_log("Could not parse debug argument: %s.",
-				   argv[0]);
-			return 0;
-		}
-		argc--;
-		argv++;
-		if (argc) {
-			errno = 0;
-			_verbose = (int) strtol(argv[0], &endptr, 10);
-			if (errno || *endptr) {
-				_early_log("Could not parse verbose "
-					   "argument: %s", argv[0]);
-				return 0;
-			}
-			if (_verbose < 0 || _verbose > 3) {
-				_early_log("Verbose argument out of range: %d.",
-					   _verbose);
-				return 0;
-			}
-		}
-	}
-	return 1;
-}
-
-static int _filemap_fd_update_blocks(struct filemap_monitor *fm)
-{
-	struct stat buf;
-
-	if (fm->fd < 0) {
-		log_error("Filemap fd is not open.");
-		return 0;
-	}
-
-	if (fstat(fm->fd, &buf)) {
-		log_error("Failed to fstat filemap file descriptor.");
-		return 0;
-	}
-
-	fm->blocks = buf.st_blocks;
-
-	return 1;
-}
-
-static int _filemap_fd_check_changed(struct filemap_monitor *fm)
-{
-	int64_t old_blocks;
-
-	old_blocks = fm->blocks;
-
-	if (!_filemap_fd_update_blocks(fm))
-		return -1;
-
-	return (fm->blocks != old_blocks);
-}
-
-static void _filemap_monitor_close_fd(struct filemap_monitor *fm)
-{
-	if (close(fm->fd))
-		log_error("Error closing file descriptor.");
-	fm->fd = -1;
-}
-
-static void _filemap_monitor_end_notify(struct filemap_monitor *fm)
-{
-	inotify_rm_watch(fm->inotify_fd, fm->inotify_watch_fd);
-}
-
-static int _filemap_monitor_set_notify(struct filemap_monitor *fm)
-{
-	int inotify_fd, watch_fd;
-
-	/*
-	 * Set IN_NONBLOCK since we do not want to block in event read()
-	 * calls. Do not set IN_CLOEXEC as dmfilemapd is single-threaded
-	 * and does not fork or exec.
-	 */
-	if ((inotify_fd = inotify_init1(IN_NONBLOCK)) < 0) {
-		log_sys_error("inotify_init1", "IN_NONBLOCK");
-		return 0;
-	}
-
-	if ((watch_fd = inotify_add_watch(inotify_fd, fm->path,
-					  IN_MODIFY | IN_DELETE_SELF)) < 0) {
-		log_sys_error("inotify_add_watch", fm->path);
-		return 0;
-	}
-	fm->inotify_fd = inotify_fd;
-	fm->inotify_watch_fd = watch_fd;
-	return 1;
-}
-
-static int _filemap_monitor_reopen_fd(struct filemap_monitor *fm)
-{
-	int tries = FILEMAPD_NOFILE_WAIT_TRIES;
-
-	/*
-	 * In DM_FILEMAPD_FOLLOW_PATH mode, inotify watches must be
-	 * re-established whenever the file at the watched path is
-	 * changed.
-	 *
-	 * FIXME: stat file and skip if inode is unchanged.
-	 */
-	if (fm->fd > 0)
-		log_error("Filemap file descriptor already open.");
-
-	while ((fm->fd < 0) && --tries)
-		if (((fm->fd = open(fm->path, O_RDONLY)) < 0) && tries)
-			_filemap_monitor_wait(FILEMAPD_NOFILE_WAIT_USECS);
-
-	if (!tries && (fm->fd < 0)) {
-		log_error("Could not re-open file descriptor.");
-		return 0;
-	}
-
-	return _filemap_monitor_set_notify(fm);
-}
-
-static int _filemap_monitor_get_events(struct filemap_monitor *fm)
-{
-	/* alignment as per man(7) inotify */
-	char buf[sizeof(struct inotify_event) + NAME_MAX + 1]
-		__attribute__ ((aligned(__alignof__(struct inotify_event))));
-
-	struct inotify_event *event;
-	int check = 0;
-	ssize_t len;
-	char *ptr;
-
-	/*
-	 * Close the file descriptor for the file being monitored here
-	 * when mode=path: this will allow the inode to be de-allocated,
-	 * and an IN_DELETE_SELF event generated in the case that the
-	 * daemon is holding the last open reference to the file.
-	 */
-	if (fm->mode == DM_FILEMAPD_FOLLOW_PATH) {
-		_filemap_monitor_end_notify(fm);
-		_filemap_monitor_close_fd(fm);
-	}
-
-	len = read(fm->inotify_fd, (void *) &buf, sizeof(buf));
-
-	/* no events to read? */
-	if (len < 0 && (errno == EAGAIN))
-		goto out;
-
-	/* interrupted by signal? */
-	if (len < 0 && (errno == EINTR))
-		goto out;
-
-	if (len < 0)
-		return -1;
-
-	if (!len)
-		goto out;
-
-	for (ptr = buf; ptr < buf + len; ptr += sizeof(*event) + event->len) {
-		event = (struct inotify_event *) ptr;
-		if (event->mask & IN_DELETE_SELF)
-			fm->deleted = 1;
-		if (event->mask & IN_MODIFY)
-			check = 1;
-		/*
-		 * Event IN_IGNORED is generated when a file has been deleted
-		 * and IN_DELETE_SELF generated, and indicates that the file
-		 * watch has been automatically removed.
-		 *
-		 * This can only happen for the DM_FILEMAPD_FOLLOW_PATH mode,
-		 * since inotify IN_DELETE events are generated at the time
-		 * the inode is destroyed: DM_FILEMAPD_FOLLOW_INODE will hold
-		 * the file descriptor open, meaning that the event will not
-		 * be generated until after the daemon closes the file.
-		 *
-		 * The event is ignored here since inotify monitoring will
-		 * be reestablished (or the daemon will terminate) following
-		 * deletion of a DM_FILEMAPD_FOLLOW_PATH monitored file.
-		 */
-		if (event->mask & IN_IGNORED)
-			log_very_verbose("Inotify watch removed: IN_IGNORED "
-					 "in event->mask");
-	}
-
-out:
-	/*
-	 * Re-open file descriptor if required and log disposition.
-	 */
-	if (fm->mode == DM_FILEMAPD_FOLLOW_PATH)
-		if (!_filemap_monitor_reopen_fd(fm))
-			return -1;
-
-	log_very_verbose("exiting _filemap_monitor_get_events() with "
-			 "deleted=%d, check=%d", fm->deleted, check);
-	return check;
-}
-
-static void _filemap_monitor_destroy(struct filemap_monitor *fm)
-{
-	if (fm->fd > 0) {
-		_filemap_monitor_end_notify(fm);
-		_filemap_monitor_close_fd(fm);
-	}
-	dm_free((void *) fm->program_id);
-	dm_free(fm->path);
-}
-
-static int _filemap_monitor_check_same_file(int fd1, int fd2)
-{
-	struct stat buf1, buf2;
-
-	if ((fd1 < 0) || (fd2 < 0))
-		return 0;
-
-	if (fstat(fd1, &buf1)) {
-		log_error("Failed to fstat file descriptor %d", fd1);
-		return -1;
-	}
-
-	if (fstat(fd2, &buf2)) {
-		log_error("Failed to fstat file descriptor %d", fd2);
-		return -1;
-	}
-
-	return ((buf1.st_dev == buf2.st_dev) && (buf1.st_ino == buf2.st_ino));
-}
-
-static int _filemap_monitor_check_file_unlinked(struct filemap_monitor *fm)
-{
-	char path_buf[PATH_MAX];
-	char link_buf[PATH_MAX];
-	int same, fd;
-	ssize_t len;
-
-	fm->deleted = 0;
-	same = 0;
-
-	if ((fd = open(fm->path, O_RDONLY)) < 0)
-		goto check_unlinked;
-
-	same = _filemap_monitor_check_same_file(fm->fd, fd);
-
-	if (close(fd))
-		log_error("Error closing fd %d", fd);
-
-	if (same < 0)
-		return 0;
-
-	if (same)
-		return 1;
-
-check_unlinked:
-	/*
-	 * The file has been unlinked from its original location: test
-	 * whether it is still reachable in the filesystem, or if it is
-	 * unlinked and anonymous.
-	 */
-	if (dm_snprintf(path_buf, sizeof(path_buf), DEFAULT_PROC_DIR
-			"/%d/fd/%d", getpid(), fm->fd) < 0) {
-		log_error("Could not format pid path.");
-		return 0;
-	}
-	if ((len = readlink(path_buf, link_buf, sizeof(link_buf) - 1)) < 0) {
-		log_error("readlink failed for " DEFAULT_PROC_DIR "/%d/fd/%d.",
-			  getpid(), fm->fd);
-		return 0;
-	}
-	link_buf[len] = '\0';
-
-	/*
-	 * Try to re-open the file, from the path now reported in /proc/pid/fd.
-	 */
-	if ((fd = open(link_buf, O_RDONLY)) < 0)
-		fm->deleted = 1;
-	else
-		same = _filemap_monitor_check_same_file(fm->fd, fd);
-
-	if ((fd >= 0) && close(fd))
-		log_error("Error closing fd %d", fd);
-
-	if (same < 0)
-		return 0;
-
-	/* Should not happen with normal /proc. */
-	if ((fd > 0) && !same) {
-		log_error("File descriptor mismatch: %d and %s (read from %s) "
-			  "are not the same file!", fm->fd, link_buf, path_buf);
-		return 0;
-	}
-	return 1;
-}
-
-static int _daemonise(struct filemap_monitor *fm)
-{
-	pid_t pid = 0, sid;
-	int fd;
-
-	if (!(sid = setsid())) {
-		_early_log("setsid failed.");
-		return 0;
-	}
-
-	if ((pid = fork()) < 0) {
-		_early_log("Failed to fork daemon process.");
-		return 0;
-	}
-
-	if (pid > 0) {
-		if (_verbose)
-			_early_log("Started dmfilemapd with pid=%d", pid);
-		exit(0);
-	}
-
-	if (chdir("/")) {
-		_early_log("Failed to change directory.");
-		return 0;
-	}
-
-	if (!_verbose) {
-		if (close(STDIN_FILENO))
-			_early_log("Error closing stdin");
-		if (close(STDOUT_FILENO))
-			_early_log("Error closing stdout");
-		if (close(STDERR_FILENO))
-			_early_log("Error closing stderr");
-		if ((open("/dev/null", O_RDONLY) < 0) ||
-	            (open("/dev/null", O_WRONLY) < 0) ||
-		    (open("/dev/null", O_WRONLY) < 0)) {
-			_early_log("Error opening stdio streams.");
-			return 0;
-		}
-	}
-	/* TODO: Use libdaemon/server/daemon-server.c _daemonise() */
-	for (fd = (int) sysconf(_SC_OPEN_MAX) - 1; fd > STDERR_FILENO; fd--) {
-		if (fd == fm->fd)
-			continue;
-		(void) close(fd);
-	}
-
-	return 1;
-}
-
-static int _update_regions(struct dm_stats *dms, struct filemap_monitor *fm)
-{
-	uint64_t *regions = NULL, *region, nr_regions = 0;
-
-	regions = dm_stats_update_regions_from_fd(dms, fm->fd, fm->group_id);
-	if (!regions) {
-		log_error("Failed to update filemap regions for group_id="
-			  FMTu64 ".", fm->group_id);
-		return 0;
-	}
-
-	for (region = regions; *region != DM_STATS_REGIONS_ALL; region++)
-		nr_regions++;
-
-	if (!nr_regions)
-		log_warn("File contains no extents: exiting.");
-
-	if (nr_regions && (regions[0] != fm->group_id)) {
-		log_warn("group_id changed from " FMTu64 " to " FMTu64,
-			 fm->group_id, regions[0]);
-		fm->group_id = regions[0];
-	}
-	dm_free(regions);
-	fm->nr_regions = nr_regions;
-	return 1;
-}
-
-static int _dmfilemapd(struct filemap_monitor *fm)
-{
-	int running = 1, check = 0, open = 0;
-	const char *program_id;
-	struct dm_stats *dms;
-
-	/*
-	 * The correct program_id is retrieved from the group leader
-	 * following the call to dm_stats_list().
-	 */
-	if (!(dms = dm_stats_create(NULL)))
-		goto_bad;
-
-	if (!dm_stats_bind_from_fd(dms, fm->fd)) {
-		log_error("Could not bind dm_stats handle to file descriptor "
-			  "%d", fm->fd);
-		goto bad;
-	}
-
-	if (!_filemap_monitor_set_notify(fm))
-		goto bad;
-
-	if (!_filemap_fd_update_blocks(fm))
-		goto bad;
-
-	if (!dm_stats_list(dms, DM_STATS_ALL_PROGRAMS)) {
-		log_error("Failed to list stats handle.");
-		goto bad;
-	}
-
-	/*
-	 * Take the program_id for new regions (created by calls to
-	 * dm_stats_update_regions_from_fd()) from the value used by
-	 * the group leader.
-	 */
-	program_id = dm_stats_get_region_program_id(dms, fm->group_id);
-	if (program_id)
-		fm->program_id = dm_strdup(program_id);
-	else
-		fm->program_id = NULL;
-	dm_stats_set_program_id(dms, 1, program_id);
-
-	do {
-		if (!dm_stats_group_present(dms, fm->group_id)) {
-			log_info("Filemap group removed: exiting.");
-			running = 0;
-			continue;
-		}
-
-		if ((check = _filemap_monitor_get_events(fm)) < 0)
-			goto bad;
-
-		if (!check)
-			goto wait;
-
-		if ((check = _filemap_fd_check_changed(fm)) < 0)
-			goto bad;
-
-		if (check && !_update_regions(dms, fm))
-			goto bad;
-
-		running = !!fm->nr_regions;
-		if (!running)
-			continue;
-
-wait:
-		_filemap_monitor_wait(FILEMAPD_WAIT_USECS);
-
-		/* mode=inode termination condions */
-		if (fm->mode == DM_FILEMAPD_FOLLOW_INODE) {
-			if (!_filemap_monitor_check_file_unlinked(fm))
-				goto bad;
-			if (fm->deleted && !(open = _is_open(fm->path))) {
-				log_info("File unlinked and closed: exiting.");
-				running = 0;
-			} else if (fm->deleted && open)
-				log_verbose("File unlinked and open: "
-					     "continuing.");
-		}
-
-		if (!dm_stats_list(dms, NULL)) {
-			log_error("Failed to list stats handle.");
-			goto bad;
-		}
-
-	} while (running);
-
-	_filemap_monitor_destroy(fm);
-	dm_stats_destroy(dms);
-	return 0;
-
-bad:
-	_filemap_monitor_destroy(fm);
-	dm_stats_destroy(dms);
-	log_error("Exiting");
-	return 1;
-}
-
-static const char * _mode_names[] = {
-	"inode",
-	"path"
-};
-
-/*
- * dmfilemapd <fd> <group_id> <path> <mode> [<foreground>[<log_level>]]
- */
-int main(int argc, char **argv)
-{
-	struct filemap_monitor fm;
-
-	memset(&fm, 0, sizeof(fm));
-
-	if (!_parse_args(argc, argv, &fm)) {
-		dm_free(fm.path);
-		return 1;
-	}
-
-	_setup_logging();
-
-	log_info("Starting dmfilemapd with fd=%d, group_id=" FMTu64 " "
-		 "mode=%s, path=%s", fm.fd, fm.group_id,
-		 _mode_names[fm.mode], fm.path);
-
-	if (!_foreground && !_daemonise(&fm))
-		return 1;
-
-	return _dmfilemapd(&fm);
-}

daemons/lvmdbusd/.gitignore

@@ -1 +0,0 @@
-path.py

daemons/lvmdbusd/Makefile.in

@@ -33,6 +33,7 @@ LVMDBUS_SRCDIR_FILES = \
 	manager.py \
 	objectmanager.py \
 	pv.py \
+	refresh.py \
 	request.py \
 	state.py \
 	udevwatch.py \

daemons/lvmdbusd/automatedproperties.py

@@ -38,7 +38,7 @@ class AutomatedProperties(dbus.service.Object):
 		props = {}
 
 		for i in self.interface():
-			props[i] = AutomatedProperties._get_all_prop(self, i)
+			props[i] = self.GetAll(i)
 
 		return self._ap_o_path, props
 
@@ -65,52 +65,31 @@ class AutomatedProperties(dbus.service.Object):
 
 		return self._ap_interface
 
-	@staticmethod
-	def _get_prop(obj, interface_name, property_name):
-		value = getattr(obj, property_name)
+	# Properties
+	# noinspection PyUnusedLocal
+	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
+							in_signature='ss', out_signature='v')
+	def Get(self, interface_name, property_name):
+		value = getattr(self, property_name)
 		# Note: If we get an exception in this handler we won't know about it,
 		# only the side effect of no returned value!
 		log_debug('Get (%s), type (%s), value(%s)' %
 					(property_name, str(type(value)), str(value)))
 		return value
 
-	# Properties
-	# noinspection PyUnusedLocal
 	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
-							in_signature='ss', out_signature='v',
-							async_callbacks=('cb', 'cbe'))
-	def Get(self, interface_name, property_name, cb, cbe):
-		# Note: If we get an exception in this handler we won't know about it,
-		# only the side effect of no returned value!
-		r = cfg.create_request_entry(
-			-1, AutomatedProperties._get_prop,
-			(self, interface_name, property_name),
-			cb, cbe, False)
-		cfg.worker_q.put(r)
-
-
-	@staticmethod
-	def _get_all_prop(obj, interface_name):
-		if interface_name in obj.interface(True):
+							in_signature='s', out_signature='a{sv}')
+	def GetAll(self, interface_name):
+		if interface_name in self.interface(True):
 			# Using introspection, lets build this dynamically
-			properties = get_properties(obj)
+			properties = get_properties(self)
 			if interface_name in properties:
 				return properties[interface_name][1]
 			return {}
 		raise dbus.exceptions.DBusException(
-			obj._ap_interface,
+			self._ap_interface,
 			'The object %s does not implement the %s interface'
-			% (obj.__class__, interface_name))
-
-	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
-							in_signature='s', out_signature='a{sv}',
-							async_callbacks=('cb', 'cbe'))
-	def GetAll(self, interface_name, cb, cbe):
-		r = cfg.create_request_entry(
-			-1, AutomatedProperties._get_all_prop,
-			(self, interface_name),
-			cb, cbe, False)
-		cfg.worker_q.put(r)
+			% (self.__class__, interface_name))
 
 	@dbus.service.method(dbus_interface=dbus.PROPERTIES_IFACE,
 							in_signature='ssv')
@@ -180,7 +159,10 @@ class AutomatedProperties(dbus.service.Object):
 			cfg.om.lookup_update(self, new_id[0], new_id[1])
 
 		# Grab the properties values, then replace the state of the object
-		# and retrieve the new values.
+		# and retrieve the new values
+		# TODO: We need to add locking to prevent concurrent access to the
+		# properties so that a client is not accessing while we are
+		# replacing.
 		o_prop = get_properties(self)
 		self.state = new_state
 		n_prop = get_properties(self)

daemons/lvmdbusd/background.py

@@ -9,13 +9,10 @@
 
 import subprocess
 from . import cfg
-from .cmdhandler import options_to_cli_args, LvmExecutionMeta
+from .cmdhandler import options_to_cli_args
 import dbus
-from .utils import pv_range_append, pv_dest_ranges, log_error, log_debug,\
-	add_no_notify
+from .utils import pv_range_append, pv_dest_ranges, log_error, log_debug
 import os
-import threading
-import time
 
 
 def pv_move_lv_cmd(move_options, lv_full_name,
@@ -44,15 +41,6 @@ def _move_merge(interface_name, command, job_state):
 	# the command always as we will be getting periodic output from them on
 	# the status of the long running operation.
 	command.insert(0, cfg.LVM_CMD)
-
-	# Instruct lvm to not register an event with us
-	command = add_no_notify(command)
-
-	#(self, start, ended, cmd, ec, stdout_txt, stderr_txt)
-	meta = LvmExecutionMeta(time.time(), 0, command, -1000, None, None)
-
-	cfg.blackbox.add(meta)
-
 	process = subprocess.Popen(command, stdout=subprocess.PIPE,
 								env=os.environ,
 								stderr=subprocess.PIPE, close_fds=True)
@@ -70,21 +58,12 @@ def _move_merge(interface_name, command, job_state):
 				(device, ignore, percentage) = line_str.split(':')
 				job_state.Percent = round(
 					float(percentage.strip()[:-1]), 1)
-
-				# While the move is in progress we need to periodically update
-				# the state to reflect where everything is at.
-				cfg.load()
 		except ValueError:
 			log_error("Trying to parse percentage which failed for %s" %
 				line_str)
 
 	out = process.communicate()
 
-	with meta.lock:
-		meta.ended = time.time()
-		meta.ec = process.returncode
-		meta.stderr_txt = out[1]
-
 	if process.returncode == 0:
 		job_state.Percent = 100
 	else:
@@ -147,16 +126,3 @@ def merge(interface_name, lv_uuid, lv_name, merge_options, job_state):
 		raise dbus.exceptions.DBusException(
 			interface_name,
 			'LV with uuid %s and name %s not present!' % (lv_uuid, lv_name))
-
-
-def _run_cmd(req):
-	log_debug(
-		"_run_cmd: Running method: %s with args %s" %
-		(str(req.method), str(req.arguments)))
-	req.run_cmd()
-	log_debug("_run_cmd: complete!")
-
-
-def cmd_runner(request):
-	t = threading.Thread(target=_run_cmd, args=(request,))
-	t.start()

daemons/lvmdbusd/cfg.py

@@ -26,7 +26,7 @@ bus = None
 args = None
 
 # Set to true if we are depending on external events for updates
-got_external_event = False
+ee = False
 
 # Shared state variable across all processes
 run = multiprocessing.Value('i', 1)
@@ -38,12 +38,12 @@ SHELL_IN_USE = None
 # Lock used by pprint
 stdout_lock = multiprocessing.Lock()
 
+kick_q = multiprocessing.Queue()
 worker_q = queue.Queue()
 
 # Main event loop
 loop = None
 
-BUS_NAME = os.getenv('LVM_DBUS_NAME', 'com.redhat.lvmdbus1')
 BASE_INTERFACE = 'com.redhat.lvmdbus1'
 PV_INTERFACE = BASE_INTERFACE + '.Pv'
 VG_INTERFACE = BASE_INTERFACE + '.Vg'
@@ -77,13 +77,9 @@ hidden_lv = itertools.count()
 
 # Used to prevent circular imports...
 load = None
-event = None
 
 # Global cached state
 db = None
 
 # lvm flight recorder
 blackbox = None
-
-# RequestEntry ctor
-create_request_entry = None

daemons/lvmdbusd/cmdhandler.py

@@ -15,9 +15,14 @@ import collections
 import traceback
 import os
 
-from lvmdbusd import cfg
-from lvmdbusd.utils import pv_dest_ranges, log_debug, log_error, add_no_notify
-from lvmdbusd.lvm_shell_proxy import LVMShellProxy
+try:
+	from . import cfg
+	from .utils import pv_dest_ranges, log_debug, log_error
+	from .lvm_shell_proxy import LVMShellProxy
+except SystemError:
+	import cfg
+	from utils import pv_dest_ranges, log_debug, log_error
+	from lvm_shell_proxy import LVMShellProxy
 
 try:
 	import simplejson as json
@@ -37,7 +42,6 @@ cmd_lock = threading.RLock()
 class LvmExecutionMeta(object):
 
 	def __init__(self, start, ended, cmd, ec, stdout_txt, stderr_txt):
-		self.lock = threading.RLock()
 		self.start = start
 		self.ended = ended
 		self.cmd = cmd
@@ -46,30 +50,28 @@ class LvmExecutionMeta(object):
 		self.stderr_txt = stderr_txt
 
 	def __str__(self):
-		with self.lock:
-			return "EC= %d for %s\n" \
-				"STARTED: %f, ENDED: %f\n" \
-				"STDOUT=%s\n" \
-				"STDERR=%s\n" % \
-				(self.ec, str(self.cmd), self.start, self.ended, self.stdout_txt,
-				self.stderr_txt)
+		return "EC= %d for %s\n" \
+			"STARTED: %f, ENDED: %f\n" \
+			"STDOUT=%s\n" \
+			"STDERR=%s\n" % \
+			(self.ec, str(self.cmd), self.start, self.ended, self.stdout_txt,
+			self.stderr_txt)
 
 
 class LvmFlightRecorder(object):
 
-	def __init__(self, size=16):
-		self.queue = collections.deque(maxlen=size)
+	def __init__(self):
+		self.queue = collections.deque(maxlen=16)
 
 	def add(self, lvm_exec_meta):
 		self.queue.append(lvm_exec_meta)
 
 	def dump(self):
 		with cmd_lock:
-			if len(self.queue):
-				log_error("LVM dbus flight recorder START")
-				for c in self.queue:
-					log_error(str(c))
-				log_error("LVM dbus flight recorder END")
+			log_error("LVM dbus flight recorder START")
+			for c in self.queue:
+				log_error(str(c))
+			log_error("LVM dbus flight recorder END")
 
 
 cfg.blackbox = LvmFlightRecorder()
@@ -95,7 +97,6 @@ def call_lvm(command, debug=False):
 	# Prepend the full lvm executable so that we can run different versions
 	# in different locations on the same box
 	command.insert(0, cfg.LVM_CMD)
-	command = add_no_notify(command)
 
 	process = Popen(command, stdout=PIPE, stderr=PIPE, close_fds=True,
 					env=os.environ)
@@ -116,7 +117,6 @@ _t_call = call_lvm
 
 def _shell_cfg():
 	global _t_call
-	# noinspection PyBroadException
 	try:
 		lvm_shell = LVMShellProxy()
 		_t_call = lvm_shell.call_lvm
@@ -281,7 +281,7 @@ def vg_lv_create(vg_name, create_options, name, size_bytes, pv_dests):
 	cmd = ['lvcreate']
 	cmd.extend(options_to_cli_args(create_options))
 	cmd.extend(['--size', str(size_bytes) + 'B'])
-	cmd.extend(['--name', name, vg_name, '--yes'])
+	cmd.extend(['--name', name, vg_name])
 	pv_dest_ranges(cmd, pv_dests)
 	return call(cmd)
 
@@ -298,7 +298,20 @@ def vg_lv_snapshot(vg_name, snapshot_options, name, size_bytes):
 	return call(cmd)
 
 
-def _vg_lv_create_common_cmd(create_options, size_bytes, thin_pool):
+def vg_lv_create_linear(vg_name, create_options, name, size_bytes, thin_pool):
+	cmd = ['lvcreate']
+	cmd.extend(options_to_cli_args(create_options))
+
+	if not thin_pool:
+		cmd.extend(['--size', str(size_bytes) + 'B'])
+	else:
+		cmd.extend(['--thin', '--size', str(size_bytes) + 'B'])
+	cmd.extend(['--name', name, vg_name])
+	return call(cmd)
+
+
+def vg_lv_create_striped(vg_name, create_options, name, size_bytes,
+							num_stripes, stripe_size_kb, thin_pool):
 	cmd = ['lvcreate']
 	cmd.extend(options_to_cli_args(create_options))
 
@@ -307,19 +320,6 @@ def _vg_lv_create_common_cmd(create_options, size_bytes, thin_pool):
 	else:
 		cmd.extend(['--thin', '--size', str(size_bytes) + 'B'])
 
-	cmd.extend(['--yes'])
-	return cmd
-
-
-def vg_lv_create_linear(vg_name, create_options, name, size_bytes, thin_pool):
-	cmd = _vg_lv_create_common_cmd(create_options, size_bytes, thin_pool)
-	cmd.extend(['--name', name, vg_name])
-	return call(cmd)
-
-
-def vg_lv_create_striped(vg_name, create_options, name, size_bytes,
-							num_stripes, stripe_size_kb, thin_pool):
-	cmd = _vg_lv_create_common_cmd(create_options, size_bytes, thin_pool)
 	cmd.extend(['--stripes', str(num_stripes)])
 
 	if stripe_size_kb != 0:
@@ -344,7 +344,7 @@ def _vg_lv_create_raid(vg_name, create_options, name, raid_type, size_bytes,
 	if stripe_size_kb != 0:
 		cmd.extend(['--stripesize', str(stripe_size_kb)])
 
-	cmd.extend(['--name', name, vg_name, '--yes'])
+	cmd.extend(['--name', name, vg_name])
 	return call(cmd)
 
 
@@ -357,15 +357,14 @@ def vg_lv_create_raid(vg_name, create_options, name, raid_type, size_bytes,
 								size_bytes, num_stripes, stripe_size_kb)
 
 
-def vg_lv_create_mirror(
-		vg_name, create_options, name, size_bytes, num_copies):
+def vg_lv_create_mirror(vg_name, create_options, name, size_bytes, num_copies):
 	cmd = ['lvcreate']
 	cmd.extend(options_to_cli_args(create_options))
 
 	cmd.extend(['--type', 'mirror'])
 	cmd.extend(['--mirrors', str(num_copies)])
 	cmd.extend(['--size', str(size_bytes) + 'B'])
-	cmd.extend(['--name', name, vg_name, '--yes'])
+	cmd.extend(['--name', name, vg_name])
 	return call(cmd)
 
 
@@ -419,7 +418,7 @@ def lv_lv_create(lv_full_name, create_options, name, size_bytes):
 	cmd = ['lvcreate']
 	cmd.extend(options_to_cli_args(create_options))
 	cmd.extend(['--virtualsize', str(size_bytes) + 'B', '-T'])
-	cmd.extend(['--name', name, lv_full_name, '--yes'])
+	cmd.extend(['--name', name, lv_full_name])
 	return call(cmd)
 
 
@@ -555,7 +554,7 @@ def pv_resize(device, size_bytes, create_options):
 	cmd.extend(options_to_cli_args(create_options))
 
 	if size_bytes != 0:
-		cmd.extend(['--yes', '--setphysicalvolumesize', str(size_bytes) + 'B'])
+		cmd.extend(['--setphysicalvolumesize', str(size_bytes) + 'B'])
 
 	cmd.extend([device])
 	return call(cmd)
@@ -620,10 +619,10 @@ def vg_reduce(vg_name, missing, pv_devices, reduce_options):
 	cmd = ['vgreduce']
 	cmd.extend(options_to_cli_args(reduce_options))
 
+	if len(pv_devices) == 0:
+		cmd.append('--all')
 	if missing:
 		cmd.append('--removemissing')
-	elif len(pv_devices) == 0:
-		cmd.append('--all')
 
 	cmd.append(vg_name)
 	cmd.extend(pv_devices)
@@ -733,8 +732,8 @@ def lv_retrieve_with_segments():
 				'lv_attr', 'lv_tags', 'vg_uuid', 'lv_active', 'data_lv',
 				'metadata_lv', 'seg_pe_ranges', 'segtype', 'lv_parent',
 				'lv_role', 'lv_layout',
-				'snap_percent', 'metadata_percent', 'copy_percent',
-				'sync_percent', 'lv_metadata_size', 'move_pv', 'move_pv_uuid']
+			    'snap_percent', 'metadata_percent', 'copy_percent',
+			    'sync_percent', 'lv_metadata_size', 'move_pv', 'move_pv_uuid']
 
 	cmd = _dc('lvs', ['-a', '-o', ','.join(columns)])
 	rc, out, err = call(cmd)
@@ -751,4 +750,4 @@ if __name__ == '__main__':
 	pv_data = pv_retrieve_with_segs()
 
 	for p in pv_data:
-		print(str(p))
+		log_debug(str(p))

daemons/lvmdbusd/fetch.py

@@ -11,10 +11,7 @@ from .pv import load_pvs
 from .vg import load_vgs
 from .lv import load_lvs
 from . import cfg
-from .utils import MThreadRunner, log_debug, log_error
-import threading
-import queue
-import traceback
+from .utils import MThreadRunner, log_debug
 
 
 def _main_thread_load(refresh=True, emit_signal=True):
@@ -48,120 +45,3 @@ def load(refresh=True, emit_signal=True, cache_refresh=True, log=True,
 		rc = _main_thread_load(refresh, emit_signal)
 
 	return rc
-
-
-# Even though lvm can handle multiple changes concurrently it really doesn't
-# make sense to make a 1-1 fetch of data for each change of lvm because when
-# we fetch the data once all previous changes are reflected.
-class StateUpdate(object):
-
-	class UpdateRequest(object):
-
-		def __init__(self, refresh, emit_signal, cache_refresh, log,
-						need_main_thread):
-			self.is_done = False
-			self.refresh = refresh
-			self.emit_signal = emit_signal
-			self.cache_refresh = cache_refresh
-			self.log = log
-			self.need_main_thread = need_main_thread
-			self.result = None
-			self.cond = threading.Condition(threading.Lock())
-
-		def done(self):
-			with self.cond:
-				if not self.is_done:
-					self.cond.wait()
-			return self.result
-
-		def set_result(self, result):
-			with self.cond:
-				self.result = result
-				self.is_done = True
-				self.cond.notify_all()
-
-	@staticmethod
-	def update_thread(obj):
-		queued_requests = []
-		while cfg.run.value != 0:
-			# noinspection PyBroadException
-			try:
-				refresh = True
-				emit_signal = True
-				cache_refresh = True
-				log = True
-				need_main_thread = True
-
-				with obj.lock:
-					wait = not obj.deferred
-					obj.deferred = False
-
-				if len(queued_requests) == 0 and wait:
-					queued_requests.append(obj.queue.get(True, 2))
-
-				# Ok we have one or the deferred queue has some,
-				# check if any others
-				try:
-					while True:
-						queued_requests.append(obj.queue.get(False))
-
-				except queue.Empty:
-					pass
-
-				if len(queued_requests) > 1:
-					log_debug("Processing %d updates!" % len(queued_requests),
-							'bg_black', 'fg_light_green')
-
-				# We have what we can, run the update with the needed options
-				for i in queued_requests:
-					if not i.refresh:
-						refresh = False
-					if not i.emit_signal:
-						emit_signal = False
-					if not i.cache_refresh:
-						cache_refresh = False
-					if not i.log:
-						log = False
-					if not i.need_main_thread:
-						need_main_thread = False
-
-				num_changes = load(refresh, emit_signal, cache_refresh, log,
-									need_main_thread)
-				# Update is done, let everyone know!
-				for i in queued_requests:
-					i.set_result(num_changes)
-
-				# Only clear out the requests after we have given them a result
-				# otherwise we can orphan the waiting threads and they never
-				# wake up if we get an exception
-				queued_requests = []
-
-			except queue.Empty:
-				pass
-			except Exception:
-				st = traceback.format_exc()
-				log_error("update_thread exception: \n%s" % st)
-				cfg.blackbox.dump()
-
-	def __init__(self):
-		self.lock = threading.RLock()
-		self.queue = queue.Queue()
-		self.deferred = False
-
-		# Do initial load
-		load(refresh=False, emit_signal=False, need_main_thread=False)
-
-		self.thread = threading.Thread(target=StateUpdate.update_thread,
-										args=(self,))
-
-	def load(self, refresh=True, emit_signal=True, cache_refresh=True,
-					log=True, need_main_thread=True):
-		# Place this request on the queue and wait for it to be completed
-		req = StateUpdate.UpdateRequest(refresh, emit_signal, cache_refresh,
-										log, need_main_thread)
-		self.queue.put(req)
-		return req.done()
-
-	def event(self):
-		with self.lock:
-			self.deferred = True

daemons/lvmdbusd/job.py

@@ -8,12 +8,11 @@
 # along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 from .automatedproperties import AutomatedProperties
-from .utils import job_obj_path_generate, mt_async_result, mt_run_no_wait
+from .utils import job_obj_path_generate, mt_async_result, log_debug
 from . import cfg
 from .cfg import JOB_INTERFACE
 import dbus
 import threading
-# noinspection PyUnresolvedReferences
 from gi.repository import GLib
 
 
@@ -180,15 +179,9 @@ class Job(AutomatedProperties):
 	def Complete(self):
 		return dbus.Boolean(self.state.Complete)
 
-	@staticmethod
-	def _signal_complete(obj):
-		obj.PropertiesChanged(
-			JOB_INTERFACE, dict(Complete=dbus.Boolean(obj.state.Complete)), [])
-
 	@Complete.setter
 	def Complete(self, value):
 		self.state.Complete = value
-		mt_run_no_wait(Job._signal_complete, self)
 
 	@property
 	def GetError(self):

daemons/lvmdbusd/lv.py

@@ -272,26 +272,6 @@ class LvCommon(AutomatedProperties):
 		self.state = object_state
 		self._move_pv = self._get_move_pv()
 
-	@staticmethod
-	def handle_execute(rc, out, err):
-		if rc == 0:
-			cfg.load()
-		else:
-			# Need to work on error handling, need consistent
-			raise dbus.exceptions.DBusException(
-				LV_INTERFACE,
-				'Exit code %s, stderr = %s' % (str(rc), err))
-
-	@staticmethod
-	def validate_dbus_object(lv_uuid, lv_name):
-		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
-		if not dbo:
-			raise dbus.exceptions.DBusException(
-				LV_INTERFACE,
-				'LV with uuid %s and name %s not present!' %
-				(lv_uuid, lv_name))
-		return dbo
-
 	@property
 	def VolumeType(self):
 		type_map = {'C': 'Cache', 'm': 'mirrored',
@@ -428,10 +408,24 @@ class Lv(LvCommon):
 	@staticmethod
 	def _remove(lv_uuid, lv_name, remove_options):
 		# Make sure we have a dbus object representing it
-		LvCommon.validate_dbus_object(lv_uuid, lv_name)
-		# Remove the LV, if successful then remove from the model
-		rc, out, err = cmdhandler.lv_remove(lv_name, remove_options)
-		LvCommon.handle_execute(rc, out, err)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
+
+		if dbo:
+			# Remove the LV, if successful then remove from the model
+			rc, out, err = cmdhandler.lv_remove(lv_name, remove_options)
+
+			if rc == 0:
+				cfg.load()
+			else:
+				# Need to work on error handling, need consistent
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(lv_uuid, lv_name))
 		return '/'
 
 	@dbus.service.method(
@@ -449,11 +443,24 @@ class Lv(LvCommon):
 	@staticmethod
 	def _rename(lv_uuid, lv_name, new_name, rename_options):
 		# Make sure we have a dbus object representing it
-		LvCommon.validate_dbus_object(lv_uuid, lv_name)
-		# Rename the logical volume
-		rc, out, err = cmdhandler.lv_rename(lv_name, new_name,
-											rename_options)
-		LvCommon.handle_execute(rc, out, err)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
+
+		if dbo:
+			# Rename the logical volume
+			rc, out, err = cmdhandler.lv_rename(lv_name, new_name,
+												rename_options)
+			if rc == 0:
+				cfg.load()
+			else:
+				# Need to work on error handling, need consistent
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(lv_uuid, lv_name))
 		return '/'
 
 	@dbus.service.method(
@@ -487,27 +494,38 @@ class Lv(LvCommon):
 				pv_dests_and_ranges, move_options, job_state), cb, cbe, False,
 				job_state)
 
-		background.cmd_runner(r)
+		cfg.worker_q.put(r)
 
 	@staticmethod
 	def _snap_shot(lv_uuid, lv_name, name, optional_size,
 			snapshot_options):
 		# Make sure we have a dbus object representing it
-		dbo = LvCommon.validate_dbus_object(lv_uuid, lv_name)
-		# If you specify a size you get a 'thick' snapshot even if
-		# it is a thin lv
-		if not dbo.IsThinVolume:
-			if optional_size == 0:
-				space = dbo.SizeBytes / 80
-				remainder = space % 512
-				optional_size = space + 512 - remainder
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
 
-		rc, out, err = cmdhandler.vg_lv_snapshot(
-			lv_name, snapshot_options, name, optional_size)
-		LvCommon.handle_execute(rc, out, err)
-		full_name = "%s/%s" % (dbo.vg_name_lookup(), name)
-		return cfg.om.get_object_path_by_lvm_id(full_name)
+		if dbo:
+			# If you specify a size you get a 'thick' snapshot even if
+			# it is a thin lv
+			if not dbo.IsThinVolume:
+				if optional_size == 0:
+					space = dbo.SizeBytes / 80
+					remainder = space % 512
+					optional_size = space + 512 - remainder
 
+			rc, out, err = cmdhandler.vg_lv_snapshot(
+				lv_name, snapshot_options, name, optional_size)
+			if rc == 0:
+				cfg.load()
+				full_name = "%s/%s" % (dbo.vg_name_lookup(), name)
+				return cfg.om.get_object_path_by_lvm_id(full_name)
+			else:
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(lv_uuid, lv_name))
 
 	@dbus.service.method(
 		dbus_interface=LV_INTERFACE,
@@ -530,24 +548,38 @@ class Lv(LvCommon):
 				resize_options):
 		# Make sure we have a dbus object representing it
 		pv_dests = []
-		dbo = LvCommon.validate_dbus_object(lv_uuid, lv_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
 
-		# If we have PVs, verify them
-		if len(pv_dests_and_ranges):
-			for pr in pv_dests_and_ranges:
-				pv_dbus_obj = cfg.om.get_object_by_path(pr[0])
-				if not pv_dbus_obj:
-					raise dbus.exceptions.DBusException(
-						LV_INTERFACE,
-						'PV Destination (%s) not found' % pr[0])
+		if dbo:
+			# If we have PVs, verify them
+			if len(pv_dests_and_ranges):
+				for pr in pv_dests_and_ranges:
+					pv_dbus_obj = cfg.om.get_object_by_path(pr[0])
+					if not pv_dbus_obj:
+						raise dbus.exceptions.DBusException(
+							LV_INTERFACE,
+							'PV Destination (%s) not found' % pr[0])
 
-				pv_dests.append((pv_dbus_obj.lvm_id, pr[1], pr[2]))
+					pv_dests.append((pv_dbus_obj.lvm_id, pr[1], pr[2]))
 
-		size_change = new_size_bytes - dbo.SizeBytes
-		rc, out, err = cmdhandler.lv_resize(dbo.lvm_id, size_change,
-											pv_dests, resize_options)
-		LvCommon.handle_execute(rc, out, err)
-		return "/"
+			size_change = new_size_bytes - dbo.SizeBytes
+
+			rc, out, err = cmdhandler.lv_resize(dbo.lvm_id, size_change,
+												pv_dests, resize_options)
+
+			if rc == 0:
+				# Refresh what's changed
+				cfg.load()
+				return "/"
+			else:
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(lv_uuid, lv_name))
 
 	@dbus.service.method(
 		dbus_interface=LV_INTERFACE,
@@ -580,11 +612,23 @@ class Lv(LvCommon):
 	def _lv_activate_deactivate(uuid, lv_name, activate, control_flags,
 								options):
 		# Make sure we have a dbus object representing it
-		LvCommon.validate_dbus_object(uuid, lv_name)
-		rc, out, err = cmdhandler.activate_deactivate(
-			'lvchange', lv_name, activate, control_flags, options)
-		LvCommon.handle_execute(rc, out, err)
-		return '/'
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, lv_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.activate_deactivate(
+				'lvchange', lv_name, activate, control_flags, options)
+			if rc == 0:
+				dbo.refresh()
+				return '/'
+			else:
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(uuid, lv_name))
 
 	@dbus.service.method(
 		dbus_interface=LV_INTERFACE,
@@ -616,11 +660,25 @@ class Lv(LvCommon):
 	@staticmethod
 	def _add_rm_tags(uuid, lv_name, tags_add, tags_del, tag_options):
 		# Make sure we have a dbus object representing it
-		LvCommon.validate_dbus_object(uuid, lv_name)
-		rc, out, err = cmdhandler.lv_tag(
-			lv_name, tags_add, tags_del, tag_options)
-		LvCommon.handle_execute(rc, out, err)
-		return '/'
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, lv_name)
+
+		if dbo:
+
+			rc, out, err = cmdhandler.lv_tag(
+				lv_name, tags_add, tags_del, tag_options)
+			if rc == 0:
+				dbo.refresh()
+				return '/'
+			else:
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(uuid, lv_name))
 
 	@dbus.service.method(
 		dbus_interface=LV_INTERFACE,
@@ -678,13 +736,27 @@ class LvThinPool(Lv):
 	@staticmethod
 	def _lv_create(lv_uuid, lv_name, name, size_bytes, create_options):
 		# Make sure we have a dbus object representing it
-		dbo = LvCommon.validate_dbus_object(lv_uuid, lv_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
 
-		rc, out, err = cmdhandler.lv_lv_create(
-			lv_name, create_options, name, size_bytes)
-		LvCommon.handle_execute(rc, out, err)
-		full_name = "%s/%s" % (dbo.vg_name_lookup(), name)
-		return cfg.om.get_object_path_by_lvm_id(full_name)
+		lv_created = '/'
+
+		if dbo:
+			rc, out, err = cmdhandler.lv_lv_create(
+				lv_name, create_options, name, size_bytes)
+			if rc == 0:
+				full_name = "%s/%s" % (dbo.vg_name_lookup(), name)
+				cfg.load()
+				lv_created = cfg.om.get_object_path_by_lvm_id(full_name)
+			else:
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				LV_INTERFACE,
+				'LV with uuid %s and name %s not present!' %
+				(lv_uuid, lv_name))
+		return lv_created
 
 	@dbus.service.method(
 		dbus_interface=THIN_POOL_INTERFACE,
@@ -721,13 +793,14 @@ class LvCachePool(Lv):
 
 	@staticmethod
 	def _cache_lv(lv_uuid, lv_name, lv_object_path, cache_options):
+
 		# Make sure we have a dbus object representing cache pool
-		dbo = LvCommon.validate_dbus_object(lv_uuid, lv_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
 
 		# Make sure we have dbus object representing lv to cache
 		lv_to_cache = cfg.om.get_object_by_path(lv_object_path)
 
-		if lv_to_cache:
+		if dbo and lv_to_cache:
 			fcn = lv_to_cache.lv_full_name()
 			rc, out, err = cmdhandler.lv_cache_lv(
 				dbo.lv_full_name(), fcn, cache_options)
@@ -739,14 +812,22 @@ class LvCachePool(Lv):
 				cfg.load()
 
 				lv_converted = cfg.om.get_object_path_by_lvm_id(fcn)
+
 			else:
 				raise dbus.exceptions.DBusException(
 					LV_INTERFACE,
 					'Exit code %s, stderr = %s' % (str(rc), err))
 		else:
-			raise dbus.exceptions.DBusException(
-				LV_INTERFACE, 'LV to cache with object path %s not present!' %
-				lv_object_path)
+			msg = ""
+			if not dbo:
+				dbo += 'CachePool LV with uuid %s and name %s not present!' % \
+					(lv_uuid, lv_name)
+
+			if not lv_to_cache:
+				dbo += 'LV to cache with object path %s not present!' % \
+					(lv_object_path)
+
+			raise dbus.exceptions.DBusException(LV_INTERFACE, msg)
 		return lv_converted
 
 	@dbus.service.method(
@@ -777,25 +858,31 @@ class LvCacheLv(Lv):
 	@staticmethod
 	def _detach_lv(lv_uuid, lv_name, detach_options, destroy_cache):
 		# Make sure we have a dbus object representing cache pool
-		dbo = LvCommon.validate_dbus_object(lv_uuid, lv_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(lv_uuid, lv_name)
 
-		# Get current cache name
-		cache_pool = cfg.om.get_object_by_path(dbo.CachePool)
+		if dbo:
 
-		rc, out, err = cmdhandler.lv_detach_cache(
-			dbo.lv_full_name(), detach_options, destroy_cache)
-		if rc == 0:
-			# The cache pool gets removed as hidden and put back to
-			# visible, so lets delete
-			mt_remove_dbus_objects((cache_pool, dbo))
-			cfg.load()
+			# Get current cache name
+			cache_pool = cfg.om.get_object_by_path(dbo.CachePool)
 
-			uncached_lv_path = cfg.om.get_object_path_by_lvm_id(lv_name)
+			rc, out, err = cmdhandler.lv_detach_cache(
+				dbo.lv_full_name(), detach_options, destroy_cache)
+			if rc == 0:
+				# The cache pool gets removed as hidden and put back to
+				# visible, so lets delete
+				mt_remove_dbus_objects((cache_pool, dbo))
+				cfg.load()
+
+				uncached_lv_path = cfg.om.get_object_path_by_lvm_id(lv_name)
+			else:
+				raise dbus.exceptions.DBusException(
+					LV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
 		else:
 			raise dbus.exceptions.DBusException(
 				LV_INTERFACE,
-				'Exit code %s, stderr = %s' % (str(rc), err))
-
+				'LV with uuid %s and name %s not present!' %
+				(lv_uuid, lv_name))
 		return uncached_lv_path
 
 	@dbus.service.method(
@@ -829,4 +916,4 @@ class LvSnapShot(Lv):
 							(SNAPSHOT_INTERFACE, self.Uuid, self.lvm_id,
 							merge_options, job_state), cb, cbe, False,
 							job_state)
-		background.cmd_runner(r)
+		cfg.worker_q.put(r)

daemons/lvmdbusd/lvm_shell_proxy.py

@@ -29,7 +29,7 @@ except ImportError:
 
 
 from lvmdbusd.cfg import LVM_CMD
-from lvmdbusd.utils import log_debug, log_error, add_no_notify
+from lvmdbusd.utils import log_debug, log_error
 
 SHELL_PROMPT = "lvm> "
 
@@ -42,81 +42,59 @@ def _quote_arg(arg):
 
 
 class LVMShellProxy(object):
-
-	@staticmethod
-	def _read(stream):
-		tmp = stream.read()
-		if tmp:
-			return tmp.decode("utf-8")
-		return ''
-
-	# Read until we get prompt back and a result
-	# @param: no_output	Caller expects no output to report FD
-	# Returns stdout, report, stderr (report is JSON!)
-	def _read_until_prompt(self, no_output=False):
+	def _read_until_prompt(self):
 		stdout = ""
 		report = ""
 		stderr = ""
-		keep_reading = True
-		extra_passes = 3
-		report_json = {}
-		prev_report_len = 0
 
 		# Try reading from all FDs to prevent one from filling up and causing
-		# a hang.  Keep reading until we get the prompt back and the report
-		# FD does not contain valid JSON
-		while keep_reading:
+		# a hang.  We are also assuming that we won't get the lvm prompt back
+		# until we have already received all the output from stderr and the
+		# report descriptor too.
+		while not stdout.endswith(SHELL_PROMPT):
 			try:
 				rd_fd = [
 					self.lvm_shell.stdout.fileno(),
-					self.report_stream.fileno(),
+					self.report_r,
 					self.lvm_shell.stderr.fileno()]
 				ready = select.select(rd_fd, [], [], 2)
 
 				for r in ready[0]:
 					if r == self.lvm_shell.stdout.fileno():
-						stdout += LVMShellProxy._read(self.lvm_shell.stdout)
-					elif r == self.report_stream.fileno():
-						report += LVMShellProxy._read(self.report_stream)
+						while True:
+							tmp = self.lvm_shell.stdout.read()
+							if tmp:
+								stdout += tmp.decode("utf-8")
+							else:
+								break
+
+					elif r == self.report_r:
+						while True:
+							tmp = os.read(self.report_r, 16384)
+							if tmp:
+								report += tmp.decode("utf-8")
+								if len(tmp) != 16384:
+									break
+							else:
+								break
+
 					elif r == self.lvm_shell.stderr.fileno():
-						stderr += LVMShellProxy._read(self.lvm_shell.stderr)
+						while True:
+							tmp = self.lvm_shell.stderr.read()
+							if tmp:
+								stderr += tmp.decode("utf-8")
+							else:
+								break
 
 				# Check to see if the lvm process died on us
 				if self.lvm_shell.poll():
 					raise Exception(self.lvm_shell.returncode, "%s" % stderr)
 
-				if stdout.endswith(SHELL_PROMPT):
-					if no_output:
-						keep_reading = False
-					else:
-						cur_report_len = len(report)
-						if cur_report_len != 0:
-							# Only bother to parse if we have more data
-							if prev_report_len != cur_report_len:
-								prev_report_len = cur_report_len
-								# Parse the JSON if it's good we are done,
-								# if not we will try to read some more.
-								try:
-									report_json = json.loads(report)
-									keep_reading = False
-								except ValueError:
-									pass
-
-						if keep_reading:
-							extra_passes -= 1
-							if extra_passes <= 0:
-								if len(report):
-									raise ValueError("Invalid json: %s" %
-														report)
-								else:
-									raise ValueError(
-										"lvm returned no JSON output!")
-
 			except IOError as ioe:
 				log_debug(str(ioe))
 				pass
 
-		return stdout, report_json, stderr
+		return stdout, report, stderr
 
 	def _write_cmd(self, cmd):
 		cmd_bytes = bytes(cmd, "utf-8")
@@ -124,11 +102,6 @@ class LVMShellProxy(object):
 		assert (num_written == len(cmd_bytes))
 		self.lvm_shell.stdin.flush()
 
-	@staticmethod
-	def _make_non_block(stream):
-		flags = fcntl(stream, F_GETFL)
-		fcntl(stream, F_SETFL, flags | os.O_NONBLOCK)
-
 	def __init__(self):
 
 		# Create a temp directory
@@ -141,10 +114,7 @@ class LVMShellProxy(object):
 		except FileExistsError:
 			pass
 
-		# We have to open non-blocking as the other side isn't open until
-		# we actually fork the process.
-		self.report_fd = os.open(tmp_file, os.O_NONBLOCK)
-		self.report_stream = os.fdopen(self.report_fd, 'rb', 0)
+		self.report_r = os.open(tmp_file, os.O_NONBLOCK)
 
 		# Setup the environment for using our own socket for reporting
 		local_env = copy.deepcopy(os.environ)
@@ -155,6 +125,9 @@ class LVMShellProxy(object):
 		# when utilizing the lvm shell.
 		local_env["LVM_LOG_FILE_MAX_LINES"] = "0"
 
+		flags = fcntl(self.report_r, F_GETFL)
+		fcntl(self.report_r, F_SETFL, flags | os.O_NONBLOCK)
+
 		# run the lvm shell
 		self.lvm_shell = subprocess.Popen(
 			[LVM_CMD + " 32>%s" % tmp_file],
@@ -162,18 +135,20 @@ class LVMShellProxy(object):
 			stderr=subprocess.PIPE, close_fds=True, shell=True)
 
 		try:
-			LVMShellProxy._make_non_block(self.lvm_shell.stdout)
-			LVMShellProxy._make_non_block(self.lvm_shell.stderr)
+			flags = fcntl(self.lvm_shell.stdout, F_GETFL)
+			fcntl(self.lvm_shell.stdout, F_SETFL, flags | os.O_NONBLOCK)
+			flags = fcntl(self.lvm_shell.stderr, F_GETFL)
+			fcntl(self.lvm_shell.stderr, F_SETFL, flags | os.O_NONBLOCK)
 
 			# wait for the first prompt
-			errors = self._read_until_prompt(no_output=True)[2]
+			errors = self._read_until_prompt()[2]
 			if errors and len(errors):
 				raise RuntimeError(errors)
 		except:
 			raise
 		finally:
-			# These will get deleted when the FD count goes to zero so we
-			# can be sure to clean up correctly no matter how we finish
+			# These will get deleted when the FD count goes to zero so we can be
+			# sure to clean up correctly no matter how we finish
 			os.unlink(tmp_file)
 			os.rmdir(tmp_dir)
 
@@ -182,32 +157,39 @@ class LVMShellProxy(object):
 		self._write_cmd('lastlog\n')
 
 		# read everything from the STDOUT to the next prompt
-		stdout, report_json, stderr = self._read_until_prompt()
-		if 'log' in report_json:
-			error_msg = ""
-			# Walk the entire log array and build an error string
-			for log_entry in report_json['log']:
-				if log_entry['log_type'] == "error":
-					if error_msg:
-						error_msg += ', ' + log_entry['log_message']
-					else:
-						error_msg = log_entry['log_message']
+		stdout, report, stderr = self._read_until_prompt()
 
-			return error_msg
+		try:
+			log = json.loads(report)
 
-		return 'No error reason provided! (missing "log" section)'
+			if 'log' in log:
+				error_msg = ""
+				# Walk the entire log array and build an error string
+				for log_entry in log['log']:
+					if log_entry['log_type'] == "error":
+						if error_msg:
+							error_msg += ', ' + log_entry['log_message']
+						else:
+							error_msg = log_entry['log_message']
+
+				return error_msg
+
+			return 'No error reason provided! (missing "log" section)'
+		except ValueError:
+			log_error("Invalid JSON returned from LVM")
+			log_error("BEGIN>>\n%s\n<<END" % report)
+			return "Invalid JSON returned from LVM when retrieving exit code"
 
 	def call_lvm(self, argv, debug=False):
 		rc = 1
 		error_msg = ""
+		json_result = ""
 
 		if self.lvm_shell.poll():
 			raise Exception(
 				self.lvm_shell.returncode,
 				"Underlying lvm shell process is not present!")
 
-		argv = add_no_notify(argv)
-
 		# create the command string
 		cmd = " ".join(_quote_arg(arg) for arg in argv)
 		cmd += "\n"
@@ -216,21 +198,23 @@ class LVMShellProxy(object):
 		self._write_cmd(cmd)
 
 		# read everything from the STDOUT to the next prompt
-		stdout, report_json, stderr = self._read_until_prompt()
+		stdout, report, stderr = self._read_until_prompt()
 
 		# Parse the report to see what happened
-		if 'log' in report_json:
-			if report_json['log'][-1:][0]['log_ret_code'] == '1':
-				rc = 0
-			else:
-				error_msg = self.get_error_msg()
+		if report and len(report):
+			json_result = json.loads(report)
+			if 'log' in json_result:
+				if json_result['log'][-1:][0]['log_ret_code'] == '1':
+					rc = 0
+				else:
+					error_msg = self.get_error_msg()
 
 		if debug or rc != 0:
 			log_error(('CMD: %s' % cmd))
 			log_error(("EC = %d" % rc))
 			log_error(("ERROR_MSG=\n %s\n" % error_msg))
 
-		return rc, report_json, error_msg
+		return rc, json_result, error_msg
 
 	def exit_shell(self):
 		try:
@@ -267,3 +251,5 @@ if __name__ == "__main__":
 		pass
 	except Exception:
 		traceback.print_exc(file=sys.stdout)
+	finally:
+		print()

daemons/lvmdbusd/lvmdb.py

@@ -68,20 +68,6 @@ class DataStore(object):
 		else:
 			table[key] = record
 
-	@staticmethod
-	def _pvs_parse_common(c_pvs, c_pvs_in_vgs, c_lookup):
-		for p in c_pvs.values():
-			# Capture which PVs are associated with which VG
-			if p['vg_uuid'] not in c_pvs_in_vgs:
-				c_pvs_in_vgs[p['vg_uuid']] = []
-
-			if p['vg_name']:
-				c_pvs_in_vgs[p['vg_uuid']].append(
-					(p['pv_name'], p['pv_uuid']))
-
-			# Lookup for translating between /dev/<name> and pv uuid
-			c_lookup[p['pv_name']] = p['pv_uuid']
-
 	@staticmethod
 	def _parse_pvs(_pvs):
 		pvs = sorted(_pvs, key=lambda pk: pk['pv_name'])
@@ -95,7 +81,18 @@ class DataStore(object):
 				c_pvs, p['pv_uuid'], p,
 				['pvseg_start', 'pvseg_size', 'segtype'])
 
-		DataStore._pvs_parse_common(c_pvs, c_pvs_in_vgs, c_lookup)
+		for p in c_pvs.values():
+			# Capture which PVs are associated with which VG
+			if p['vg_uuid'] not in c_pvs_in_vgs:
+				c_pvs_in_vgs[p['vg_uuid']] = []
+
+			if p['vg_name']:
+				c_pvs_in_vgs[p['vg_uuid']].append(
+					(p['pv_name'], p['pv_uuid']))
+
+			# Lookup for translating between /dev/<name> and pv uuid
+			c_lookup[p['pv_name']] = p['pv_uuid']
+
 		return c_pvs, c_lookup, c_pvs_in_vgs
 
 	@staticmethod
@@ -135,7 +132,17 @@ class DataStore(object):
 						i['pvseg_size'] = i['pv_pe_count']
 						i['segtype'] = 'free'
 
-		DataStore._pvs_parse_common(c_pvs, c_pvs_in_vgs, c_lookup)
+		for p in c_pvs.values():
+			# Capture which PVs are associated with which VG
+			if p['vg_uuid'] not in c_pvs_in_vgs:
+				c_pvs_in_vgs[p['vg_uuid']] = []
+
+			if p['vg_name']:
+				c_pvs_in_vgs[p['vg_uuid']].append(
+					(p['pv_name'], p['pv_uuid']))
+
+			# Lookup for translating between /dev/<name> and pv uuid
+			c_lookup[p['pv_name']] = p['pv_uuid']
 
 		return c_pvs, c_lookup, c_pvs_in_vgs
 

daemons/lvmdbusd/main.py

@@ -10,7 +10,7 @@
 from . import cfg
 from . import objectmanager
 from . import utils
-from .cfg import BUS_NAME, BASE_INTERFACE, BASE_OBJ_PATH, MANAGER_OBJ_PATH
+from .cfg import BASE_INTERFACE, BASE_OBJ_PATH, MANAGER_OBJ_PATH
 import threading
 from . import cmdhandler
 import time
@@ -20,7 +20,7 @@ import dbus.mainloop.glib
 from . import lvmdb
 # noinspection PyUnresolvedReferences
 from gi.repository import GLib
-from .fetch import StateUpdate
+from .fetch import load
 from .manager import Manager
 import traceback
 import queue
@@ -29,8 +29,7 @@ from .utils import log_debug, log_error
 import argparse
 import os
 import sys
-from .cmdhandler import LvmFlightRecorder
-from .request import RequestEntry
+from .refresh import handle_external_event, event_complete
 
 
 class Lvm(objectmanager.ObjectManager):
@@ -38,15 +37,54 @@ class Lvm(objectmanager.ObjectManager):
 		super(Lvm, self).__init__(object_path, BASE_INTERFACE)
 
 
+def _discard_pending_refreshes():
+	# We just handled a refresh, if we have any in the queue they can be
+	# removed because by definition they are older than the refresh we just did.
+	# As we limit the number of refreshes getting into the queue
+	# we should only ever have one to remove.
+	requests = []
+	while not cfg.worker_q.empty():
+		try:
+			r = cfg.worker_q.get(block=False)
+			if r.method != handle_external_event:
+				requests.append(r)
+			else:
+				# Make sure we make this event complete even though it didn't
+				# run, otherwise no other events will get processed
+				event_complete()
+				break
+		except queue.Empty:
+			break
+
+	# Any requests we removed, but did not discard need to be re-queued
+	for r in requests:
+		cfg.worker_q.put(r)
+
+
 def process_request():
 	while cfg.run.value != 0:
 		# noinspection PyBroadException
 		try:
 			req = cfg.worker_q.get(True, 5)
+
+			start = cfg.db.num_refreshes
+
 			log_debug(
 				"Running method: %s with args %s" %
 				(str(req.method), str(req.arguments)))
 			req.run_cmd()
+
+			end = cfg.db.num_refreshes
+
+			num_refreshes = end - start
+
+			if num_refreshes > 0:
+				_discard_pending_refreshes()
+
+				if num_refreshes > 1:
+					log_debug(
+						"Inspect method %s for too many refreshes" %
+						(str(req.method)))
 			log_debug("Method complete ")
 		except queue.Empty:
 			pass
@@ -55,14 +93,6 @@ def process_request():
 			utils.log_error("process_request exception: \n%s" % st)
 
 
-def check_bb_size(value):
-	v = int(value)
-	if v < 0:
-		raise argparse.ArgumentTypeError(
-			"positive integers only ('%s' invalid)" % value)
-	return v
-
-
 def main():
 	start = time.time()
 	# Add simple command line handling
@@ -85,12 +115,6 @@ def main():
 		help="Use the lvm shell, not fork & exec lvm",
 		default=False,
 		dest='use_lvm_shell')
-	parser.add_argument(
-		"--blackboxsize",
-		help="Size of the black box flight recorder, 0 to disable",
-		default=10,
-		type=check_bb_size,
-		dest='bb_size')
 
 	use_session = os.getenv('LVMDBUSD_USE_SESSION', False)
 
@@ -98,17 +122,13 @@ def main():
 	os.environ["LC_ALL"] = "C"
 
 	cfg.args = parser.parse_args()
-	cfg.create_request_entry = RequestEntry
-
-	# We create a flight recorder in cmdhandler too, but we replace it here
-	# as the user may be specifying a different size.  The default one in
-	# cmdhandler is for when we are running other code with a different main.
-	cfg.blackbox = LvmFlightRecorder(cfg.args.bb_size)
 
 	if cfg.args.use_lvm_shell and not cfg.args.use_json:
 		log_error("You cannot specify --lvmshell and --nojson")
 		sys.exit(1)
 
+	cmdhandler.set_execution(cfg.args.use_lvm_shell)
+
 	# List of threads that we start up
 	thread_list = []
 
@@ -122,36 +142,30 @@ def main():
 	dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
 	dbus.mainloop.glib.threads_init()
 
-	cmdhandler.set_execution(cfg.args.use_lvm_shell)
-
 	if use_session:
 		cfg.bus = dbus.SessionBus()
 	else:
 		cfg.bus = dbus.SystemBus()
 	# The base name variable needs to exist for things to work.
 	# noinspection PyUnusedLocal
-	base_name = dbus.service.BusName(BUS_NAME, cfg.bus)
+	base_name = dbus.service.BusName(BASE_INTERFACE, cfg.bus)
 	cfg.om = Lvm(BASE_OBJ_PATH)
 	cfg.om.register_object(Manager(MANAGER_OBJ_PATH))
 
+	cfg.load = load
+
 	cfg.db = lvmdb.DataStore(cfg.args.use_json)
 
 	# Using a thread to process requests, we cannot hang the dbus library
 	# thread that is handling the dbus interface
 	thread_list.append(threading.Thread(target=process_request))
 
-	# Have a single thread handling updating lvm and the dbus model so we
-	# don't have multiple threads doing this as the same time
-	updater = StateUpdate()
-	thread_list.append(updater.thread)
-
-	cfg.load = updater.load
-
+	cfg.load(refresh=False, emit_signal=False, need_main_thread=False)
 	cfg.loop = GLib.MainLoop()
 
-	for thread in thread_list:
-		thread.damon = True
-		thread.start()
+	for process in thread_list:
+		process.damon = True
+		process.start()
 
 	# Add udev watching
 	if cfg.args.use_udev:
@@ -173,8 +187,8 @@ def main():
 			cfg.loop.run()
 			udevwatch.remove()
 
-			for thread in thread_list:
-				thread.join()
+			for process in thread_list:
+				process.join()
 	except KeyboardInterrupt:
 		utils.handler(signal.SIGINT, None)
 	return 0

daemons/lvmdbusd/manager.py

@@ -6,6 +6,7 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program. If not, see <http://www.gnu.org/licenses/>.
+
 from .automatedproperties import AutomatedProperties
 
 from . import utils
@@ -13,7 +14,9 @@ from .cfg import MANAGER_INTERFACE
 import dbus
 from . import cfg
 from . import cmdhandler
+from .fetch import load_pvs, load_vgs
 from .request import RequestEntry
+from .refresh import event_add
 from . import udevwatch
 
 
@@ -29,16 +32,6 @@ class Manager(AutomatedProperties):
 	def Version(self):
 		return dbus.String('1.0.0')
 
-	@staticmethod
-	def handle_execute(rc, out, err):
-		if rc == 0:
-			cfg.load()
-		else:
-			# Need to work on error handling, need consistent
-			raise dbus.exceptions.DBusException(
-				MANAGER_INTERFACE,
-				'Exit code %s, stderr = %s' % (str(rc), err))
-
 	@staticmethod
 	def _pv_create(device, create_options):
 
@@ -47,11 +40,18 @@ class Manager(AutomatedProperties):
 		pv = cfg.om.get_object_path_by_uuid_lvm_id(device, device)
 		if pv:
 			raise dbus.exceptions.DBusException(
-				MANAGER_INTERFACE, "PV %s Already exists!" % device)
+				MANAGER_INTERFACE, "PV Already exists!")
 
 		rc, out, err = cmdhandler.pv_create(create_options, [device])
-		Manager.handle_execute(rc, out, err)
-		return cfg.om.get_object_path_by_lvm_id(device)
+		if rc == 0:
+			cfg.load()
+			created_pv = cfg.om.get_object_path_by_lvm_id(device)
+		else:
+			raise dbus.exceptions.DBusException(
+				MANAGER_INTERFACE,
+				'Exit code %s, stderr = %s' % (str(rc), err))
+
+		return created_pv
 
 	@dbus.service.method(
 		dbus_interface=MANAGER_INTERFACE,
@@ -78,8 +78,14 @@ class Manager(AutomatedProperties):
 					MANAGER_INTERFACE, 'object path = %s not found' % p)
 
 		rc, out, err = cmdhandler.vg_create(create_options, pv_devices, name)
-		Manager.handle_execute(rc, out, err)
-		return cfg.om.get_object_path_by_lvm_id(name)
+
+		if rc == 0:
+			cfg.load()
+			return cfg.om.get_object_path_by_lvm_id(name)
+		else:
+			raise dbus.exceptions.DBusException(
+				MANAGER_INTERFACE,
+				'Exit code %s, stderr = %s' % (str(rc), err))
 
 	@dbus.service.method(
 		dbus_interface=MANAGER_INTERFACE,
@@ -131,28 +137,11 @@ class Manager(AutomatedProperties):
 		r = RequestEntry(-1, Manager._refresh, (), cb, cbe, False)
 		cfg.worker_q.put(r)
 
-	@dbus.service.method(
-		dbus_interface=MANAGER_INTERFACE)
-	def FlightRecorderDump(self):
-		"""
-		Dump the flight recorder to syslog
-		"""
-		cfg.blackbox.dump()
-
-	@staticmethod
-	def _lookup_by_lvm_id(key):
-		p = cfg.om.get_object_path_by_uuid_lvm_id(key, key)
-		if not p:
-			p = '/'
-		utils.log_debug('LookUpByLvmId: key = %s, result = %s' % (key, p))
-		return p
-
 	@dbus.service.method(
 		dbus_interface=MANAGER_INTERFACE,
 		in_signature='s',
-		out_signature='o',
-		async_callbacks=('cb', 'cbe'))
-	def LookUpByLvmId(self, key, cb, cbe):
+		out_signature='o')
+	def LookUpByLvmId(self, key):
 		"""
 		Given a lvm id in one of the forms:
 
@@ -166,50 +155,35 @@ class Manager(AutomatedProperties):
 		:param key: The lookup value
 		:return: Return the object path.  If object not found you will get '/'
 		"""
-		r = RequestEntry(-1, Manager._lookup_by_lvm_id, (key,), cb, cbe, False)
-		cfg.worker_q.put(r)
-
-	@staticmethod
-	def _use_lvm_shell(yes_no):
-		return dbus.Boolean(cmdhandler.set_execution(yes_no))
+		p = cfg.om.get_object_path_by_uuid_lvm_id(key, key)
+		if p:
+			return p
+		return '/'
 
 	@dbus.service.method(
 		dbus_interface=MANAGER_INTERFACE,
-		in_signature='b', out_signature='b',
-		async_callbacks=('cb', 'cbe'))
-	def UseLvmShell(self, yes_no, cb, cbe):
+		in_signature='b', out_signature='b')
+	def UseLvmShell(self, yes_no):
 		"""
 		Allow the client to enable/disable lvm shell, used for testing
 		:param yes_no:
-		:param cb:	dbus python call back parameter, not client visible
-		:param cbe:	dbus python error call back parameter, not client visible
-		:return: Boolean
+		:return: Nothing
 		"""
-		r = RequestEntry(-1, Manager._use_lvm_shell, (yes_no,), cb, cbe, False)
-		cfg.worker_q.put(r)
-
-	@staticmethod
-	def _external_event(command):
-		utils.log_debug("Processing _external_event= %s" % command,
-							'bg_black', 'fg_orange')
-		cfg.load()
+		return dbus.Boolean(cmdhandler.set_execution(yes_no))
 
 	@dbus.service.method(
 		dbus_interface=MANAGER_INTERFACE,
 		in_signature='s', out_signature='i')
 	def ExternalEvent(self, command):
-		utils.log_debug("ExternalEvent %s" % command)
+
 		# If a user didn't explicitly specify udev, we will turn it off now.
 		if not cfg.args.use_udev:
 			if udevwatch.remove():
 				utils.log_debug("ExternalEvent received, disabling "
 								"udev monitoring")
 				# We are dependent on external events now to stay current!
-				cfg.got_external_event = True
-
-		r = RequestEntry(
-			-1, Manager._external_event, (command,), None, None, False)
-		cfg.worker_q.put(r)
+				cfg.ee = True
+		event_add((command,))
 		return dbus.Int32(0)
 
 	@staticmethod
@@ -219,8 +193,15 @@ class Manager(AutomatedProperties):
 			activate, cache, device_path,
 			major_minor, scan_options)
 
-		Manager.handle_execute(rc, out, err)
-		return '/'
+		if rc == 0:
+			# This could potentially change the state quite a bit, so lets
+			# update everything to be safe
+			cfg.load()
+			return '/'
+		else:
+			raise dbus.exceptions.DBusException(
+				MANAGER_INTERFACE,
+				'Exit code %s, stderr = %s' % (str(rc), err))
 
 	@dbus.service.method(
 		dbus_interface=MANAGER_INTERFACE,

daemons/lvmdbusd/objectmanager.py

@@ -32,12 +32,14 @@ class ObjectManager(AutomatedProperties):
 		self._id_to_object_path = {}
 		self.rlock = threading.RLock()
 
-	@staticmethod
-	def _get_managed_objects(obj):
-		with obj.rlock:
+	@dbus.service.method(
+		dbus_interface="org.freedesktop.DBus.ObjectManager",
+		out_signature='a{oa{sa{sv}}}')
+	def GetManagedObjects(self):
+		with self.rlock:
 			rc = {}
 			try:
-				for k, v in list(obj._objects.items()):
+				for k, v in list(self._objects.items()):
 					path, props = v[0].emit_data()
 					rc[path] = props
 			except Exception:
@@ -45,14 +47,6 @@ class ObjectManager(AutomatedProperties):
 				sys.exit(1)
 			return rc
 
-	@dbus.service.method(
-		dbus_interface="org.freedesktop.DBus.ObjectManager",
-		out_signature='a{oa{sa{sv}}}', async_callbacks=('cb', 'cbe'))
-	def GetManagedObjects(self, cb, cbe):
-		r = cfg.create_request_entry(-1, ObjectManager._get_managed_objects,
-									(self, ), cb, cbe, False)
-		cfg.worker_q.put(r)
-
 	def locked(self):
 		"""
 		If some external code need to run across a number of different
@@ -223,9 +217,8 @@ class ObjectManager(AutomatedProperties):
 		:param lvm_id: The lvm identifier
 		"""
 		with self.rlock:
-			lookup_rc = self._id_lookup(lvm_id)
-			if lookup_rc:
-				return self.get_object_by_path(lookup_rc)
+			if lvm_id in self._id_to_object_path:
+				return self.get_object_by_path(self._id_to_object_path[lvm_id])
 			return None
 
 	def get_object_path_by_lvm_id(self, lvm_id):
@@ -235,9 +228,8 @@ class ObjectManager(AutomatedProperties):
 		:return: Object path or '/' if not found
 		"""
 		with self.rlock:
-			lookup_rc = self._id_lookup(lvm_id)
-			if lookup_rc:
-				return lookup_rc
+			if lvm_id in self._id_to_object_path:
+				return self._id_to_object_path[lvm_id]
 			return '/'
 
 	def _uuid_verify(self, path, uuid, lvm_id):

daemons/lvmdbusd/pv.py

@@ -18,7 +18,7 @@ from .utils import vg_obj_path_generate, n, pv_obj_path_generate, \
 from .loader import common
 from .request import RequestEntry
 from .state import State
-from .utils import round_size
+from .utils import round_size, mt_remove_dbus_objects
 
 
 # noinspection PyUnusedLocal
@@ -135,30 +135,23 @@ class Pv(AutomatedProperties):
 	def _remove(pv_uuid, pv_name, remove_options):
 		# Remove the PV, if successful then remove from the model
 		# Make sure we have a dbus object representing it
-		Pv.validate_dbus_object(pv_uuid, pv_name)
-		rc, out, err = cmdhandler.pv_remove(pv_name, remove_options)
-		Pv.handle_execute(rc, out, err)
-		return '/'
-
-	@staticmethod
-	def handle_execute(rc, out, err):
-		if rc == 0:
-			cfg.load()
-		else:
-			# Need to work on error handling, need consistent
-			raise dbus.exceptions.DBusException(
-				PV_INTERFACE,
-				'Exit code %s, stderr = %s' % (str(rc), err))
-
-	@staticmethod
-	def validate_dbus_object(pv_uuid, pv_name):
 		dbo = cfg.om.get_object_by_uuid_lvm_id(pv_uuid, pv_name)
-		if not dbo:
+
+		if dbo:
+			rc, out, err = cmdhandler.pv_remove(pv_name, remove_options)
+			if rc == 0:
+				mt_remove_dbus_objects((dbo,))
+			else:
+				# Need to work on error handling, need consistent
+				raise dbus.exceptions.DBusException(
+					PV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
 			raise dbus.exceptions.DBusException(
 				PV_INTERFACE,
 				'PV with uuid %s and name %s not present!' %
 				(pv_uuid, pv_name))
-		return dbo
+		return '/'
 
 	@dbus.service.method(
 		dbus_interface=PV_INTERFACE,
@@ -175,11 +168,22 @@ class Pv(AutomatedProperties):
 	@staticmethod
 	def _resize(pv_uuid, pv_name, new_size_bytes, resize_options):
 		# Make sure we have a dbus object representing it
-		Pv.validate_dbus_object(pv_uuid, pv_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(pv_uuid, pv_name)
 
-		rc, out, err = cmdhandler.pv_resize(pv_name, new_size_bytes,
+		if dbo:
+			rc, out, err = cmdhandler.pv_resize(pv_name, new_size_bytes,
 												resize_options)
-		Pv.handle_execute(rc, out, err)
+			if rc == 0:
+				cfg.load()
+			else:
+				raise dbus.exceptions.DBusException(
+					PV_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				PV_INTERFACE,
+				'PV with uuid %s and name %s not present!' %
+				(pv_uuid, pv_name))
 		return '/'
 
 	@dbus.service.method(
@@ -197,10 +201,21 @@ class Pv(AutomatedProperties):
 	@staticmethod
 	def _allocation_enabled(pv_uuid, pv_name, yes_no, allocation_options):
 		# Make sure we have a dbus object representing it
-		Pv.validate_dbus_object(pv_uuid, pv_name)
-		rc, out, err = cmdhandler.pv_allocatable(
-			pv_name, yes_no, allocation_options)
-		Pv.handle_execute(rc, out, err)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(pv_uuid, pv_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.pv_allocatable(
+				pv_name, yes_no, allocation_options)
+			if rc == 0:
+				cfg.load()
+			else:
+				raise dbus.exceptions.DBusException(
+					PV_INTERFACE, 'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				PV_INTERFACE,
+				'PV with uuid %s and name %s not present!' %
+				(pv_uuid, pv_name))
 		return '/'
 
 	@dbus.service.method(

daemons/lvmdbusd/refresh.py

@@ -0,0 +1,45 @@
+# Copyright (C) 2015-2016 Red Hat, Inc. All rights reserved.
+#
+# This copyrighted material is made available to anyone wishing to use,
+# modify, copy, or redistribute it subject to the terms and conditions
+# of the GNU General Public License v.2.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Try and minimize the refreshes we do.
+
+import threading
+from .request import RequestEntry
+from . import cfg
+from . import utils
+
+_rlock = threading.RLock()
+_count = 0
+
+
+def handle_external_event(command):
+	utils.log_debug("External event: '%s'" % command)
+	event_complete()
+	cfg.load()
+
+
+def event_add(params):
+	global _rlock
+	global _count
+	with _rlock:
+		if _count == 0:
+			_count += 1
+			r = RequestEntry(
+				-1, handle_external_event,
+				params, None, None, False)
+			cfg.worker_q.put(r)
+
+
+def event_complete():
+	global _rlock
+	global _count
+	with _rlock:
+		if _count > 0:
+			_count -= 1
+		return _count

daemons/lvmdbusd/request.py

@@ -19,6 +19,7 @@ from .utils import log_error, mt_async_result
 class RequestEntry(object):
 	def __init__(self, tmo, method, arguments, cb, cb_error,
 			return_tuple=True, job_state=None):
+		self.tmo = tmo
 		self.method = method
 		self.arguments = arguments
 		self.cb = cb
@@ -34,38 +35,31 @@ class RequestEntry(object):
 		self._return_tuple = return_tuple
 		self._job_state = job_state
 
-		if tmo < 0:
+		if self.tmo < 0:
 			# Client is willing to block forever
 			pass
 		elif tmo == 0:
 			self._return_job()
 		else:
-			# Note: using 990 instead of 1000 for second to ms conversion to
-			# account for overhead.  Goal is to return just before the
-			# timeout amount has expired.  Better to be a little early than
-			# late.
-			self.timer_id = GLib.timeout_add(
-				tmo * 990, RequestEntry._request_timeout, self)
+			self.timer_id = GLib.timeout_add_seconds(
+				tmo, RequestEntry._request_timeout, self)
 
 	@staticmethod
 	def _request_timeout(r):
 		"""
 		Method which gets called when the timer runs out!
 		:param r:  RequestEntry which timed out
-		:return: Result of timer_expired
+		:return: Nothing
 		"""
-		return r.timer_expired()
+		r.timer_expired()
 
 	def _return_job(self):
-		# Return job is only called when we create a request object or when
-		# we pop a timer.  In both cases we are running in the correct context
-		# and do not need to schedule the call back in main context.
 		self._job = Job(self, self._job_state)
 		cfg.om.register_object(self._job, True)
 		if self._return_tuple:
-			self.cb(('/', self._job.dbus_object_path()))
+			mt_async_result(self.cb, ('/', self._job.dbus_object_path()))
 		else:
-			self.cb(self._job.dbus_object_path())
+			mt_async_result(self.cb, self._job.dbus_object_path())
 
 	def run_cmd(self):
 		try:
@@ -132,6 +126,7 @@ class RequestEntry(object):
 						mt_async_result(self.cb_error, error_exception)
 			else:
 				# We have a job and it's complete, indicate that it's done.
+				# TODO: We need to signal the job is done too.
 				self._job.Complete = True
 				self._job = None
 

daemons/lvmdbusd/udevwatch.py

@@ -9,42 +9,12 @@
 
 import pyudev
 import threading
+from .refresh import event_add
 from . import cfg
-from .request import RequestEntry
-from . import utils
 
 observer = None
 observer_lock = threading.RLock()
 
-_udev_lock = threading.RLock()
-_udev_count = 0
-
-
-def udev_add():
-	global _udev_count
-	with _udev_lock:
-		if _udev_count == 0:
-			_udev_count += 1
-
-			# Place this on the queue so any other operations will sequence
-			# behind it
-			r = RequestEntry(
-				-1, _udev_event, (), None, None, False)
-			cfg.worker_q.put(r)
-
-
-def udev_complete():
-	global _udev_count
-	with _udev_lock:
-		if _udev_count > 0:
-			_udev_count -= 1
-
-
-def _udev_event():
-	utils.log_debug("Processing udev event")
-	udev_complete()
-	cfg.load()
-
 
 # noinspection PyUnusedLocal
 def filter_event(action, device):
@@ -68,7 +38,7 @@ def filter_event(action, device):
 		refresh = True
 
 	if refresh:
-		udev_add()
+		event_add(('udev',))
 
 
 def add():

daemons/lvmdbusd/utils.py

@@ -17,7 +17,6 @@ import datetime
 
 import dbus
 from lvmdbusd import cfg
-# noinspection PyUnresolvedReferences
 from gi.repository import GLib
 import threading
 
@@ -499,35 +498,6 @@ def validate_tag(interface, tag):
 			% (tag, _ALLOWABLE_TAG_CH))
 
 
-def add_no_notify(cmdline):
-	"""
-	Given a command line to execute we will see if `--config` is present, if it
-	is we will add the global/notify_dbus=0 to it, otherwise we will append it
-	to the end of the list.
-	:param: cmdline: The command line to inspect
-	:type: cmdline: list
-	:return: cmdline with notify_dbus config option present
-	:rtype: list
-	"""
-
-	# Only after we have seen an external event will be disable lvm from sending
-	# us one when we call lvm
-	if cfg.got_external_event:
-		if 'help' in cmdline:
-			return cmdline
-
-		if '--config' in cmdline:
-			for i, arg in enumerate(cmdline):
-				if arg == '--config':
-					if len(cmdline) <= i+1:
-						raise dbus.exceptions.DBusException("Missing value for --config option.")
-					cmdline[i+1] += " global/notify_dbus=0"
-					break
-		else:
-			cmdline.extend(['--config', 'global/notify_dbus=0'])
-	return cmdline
-
-
 # The methods below which start with mt_* are used to execute the desired code
 # on the the main thread of execution to alleviate any issues the dbus-python
 # library with regards to multi-threaded access.  Essentially, we are trying to
@@ -538,17 +508,11 @@ def _async_result(call_back, results):
 	log_debug('Results = %s' % str(results))
 	call_back(results)
 
-
 # Return result in main thread
 def mt_async_result(call_back, results):
 	GLib.idle_add(_async_result, call_back, results)
 
 
-# Take the supplied function and run it on the main thread and not wait for
-# a result!
-def mt_run_no_wait(function, param):
-	GLib.idle_add(function, param)
-
 # Run the supplied function and arguments on the main thread and wait for them
 # to complete while allowing the ability to get the return value too.
 #
@@ -559,7 +523,6 @@ class MThreadRunner(object):
 
 	@staticmethod
 	def runner(obj):
-		# noinspection PyProtectedMember
 		obj._run()
 		with obj.cond:
 			obj.function_complete = True

daemons/lvmdbusd/vg.py

@@ -145,35 +145,29 @@ class Vg(AutomatedProperties):
 
 	@staticmethod
 	def fetch_new_lv(vg_name, lv_name):
+		cfg.load()
 		return cfg.om.get_object_path_by_lvm_id("%s/%s" % (vg_name, lv_name))
 
-	@staticmethod
-	def handle_execute(rc, out, err):
-		if rc == 0:
-			cfg.load()
-		else:
-			# Need to work on error handling, need consistent
-			raise dbus.exceptions.DBusException(
-				VG_INTERFACE,
-				'Exit code %s, stderr = %s' % (str(rc), err))
-
-	@staticmethod
-	def validate_dbus_object(vg_uuid, vg_name):
-		dbo = cfg.om.get_object_by_uuid_lvm_id(vg_uuid, vg_name)
-		if not dbo:
-			raise dbus.exceptions.DBusException(
-				VG_INTERFACE,
-				'VG with uuid %s and name %s not present!' %
-				(vg_uuid, vg_name))
-		return dbo
-
 	@staticmethod
 	def _rename(uuid, vg_name, new_name, rename_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = cmdhandler.vg_rename(
-			vg_name, new_name, rename_options)
-		Vg.handle_execute(rc, out, err)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.vg_rename(vg_name, new_name,
+												rename_options)
+			if rc == 0:
+				cfg.load()
+			else:
+				# Need to work on error handling, need consistent
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 		return '/'
 
 	@dbus.service.method(
@@ -190,10 +184,24 @@ class Vg(AutomatedProperties):
 	@staticmethod
 	def _remove(uuid, vg_name, remove_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		# Remove the VG, if successful then remove from the model
-		rc, out, err = cmdhandler.vg_remove(vg_name, remove_options)
-		Vg.handle_execute(rc, out, err)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			# Remove the VG, if successful then remove from the model
+			rc, out, err = cmdhandler.vg_remove(vg_name, remove_options)
+
+			if rc == 0:
+				cfg.load()
+			else:
+				# Need to work on error handling, need consistent
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 		return '/'
 
 	@dbus.service.method(
@@ -208,9 +216,26 @@ class Vg(AutomatedProperties):
 
 	@staticmethod
 	def _change(uuid, vg_name, change_options):
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = cmdhandler.vg_change(change_options, vg_name)
-		Vg.handle_execute(rc, out, err)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.vg_change(change_options, vg_name)
+
+			# To use an example with d-feet (Method input)
+			# {"activate": __import__('gi.repository.GLib', globals(),
+			# locals(), ['Variant']).Variant("s", "n")}
+
+			if rc == 0:
+				cfg.load()
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 		return '/'
 
 	# TODO: This should be broken into a number of different methods
@@ -231,24 +256,34 @@ class Vg(AutomatedProperties):
 	@staticmethod
 	def _reduce(uuid, vg_name, missing, pv_object_paths, reduce_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
-		pv_devices = []
+		if dbo:
+			pv_devices = []
 
-		# If pv_object_paths is not empty, then get the device paths
-		if pv_object_paths and len(pv_object_paths) > 0:
-			for pv_op in pv_object_paths:
-				pv = cfg.om.get_object_by_path(pv_op)
-				if pv:
-					pv_devices.append(pv.lvm_id)
-				else:
-					raise dbus.exceptions.DBusException(
-						VG_INTERFACE,
-						'PV Object path not found = %s!' % pv_op)
+			# If pv_object_paths is not empty, then get the device paths
+			if pv_object_paths and len(pv_object_paths) > 0:
+				for pv_op in pv_object_paths:
+					pv = cfg.om.get_object_by_path(pv_op)
+					if pv:
+						pv_devices.append(pv.lvm_id)
+					else:
+						raise dbus.exceptions.DBusException(
+							VG_INTERFACE,
+							'PV Object path not found = %s!' % pv_op)
 
-		rc, out, err = cmdhandler.vg_reduce(vg_name, missing, pv_devices,
-											reduce_options)
-		Vg.handle_execute(rc, out, err)
+			rc, out, err = cmdhandler.vg_reduce(vg_name, missing, pv_devices,
+												reduce_options)
+			if rc == 0:
+				cfg.load()
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE, 'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 		return '/'
 
 	@dbus.service.method(
@@ -265,26 +300,36 @@ class Vg(AutomatedProperties):
 	@staticmethod
 	def _extend(uuid, vg_name, pv_object_paths, extend_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
-		extend_devices = []
+		if dbo:
+			extend_devices = []
 
-		for i in pv_object_paths:
-			pv = cfg.om.get_object_by_path(i)
-			if pv:
-				extend_devices.append(pv.lvm_id)
+			for i in pv_object_paths:
+				pv = cfg.om.get_object_by_path(i)
+				if pv:
+					extend_devices.append(pv.lvm_id)
+				else:
+					raise dbus.exceptions.DBusException(
+						VG_INTERFACE, 'PV Object path not found = %s!' % i)
+
+			if len(extend_devices):
+				rc, out, err = cmdhandler.vg_extend(vg_name, extend_devices,
+													extend_options)
+				if rc == 0:
+					cfg.load()
+				else:
+					raise dbus.exceptions.DBusException(
+						VG_INTERFACE,
+						'Exit code %s, stderr = %s' % (str(rc), err))
 			else:
 				raise dbus.exceptions.DBusException(
-					VG_INTERFACE, 'PV Object path not found = %s!' % i)
-
-		if len(extend_devices):
-			rc, out, err = cmdhandler.vg_extend(vg_name, extend_devices,
-												extend_options)
-			Vg.handle_execute(rc, out, err)
+					VG_INTERFACE, 'No pv_object_paths provided!')
 		else:
 			raise dbus.exceptions.DBusException(
-				VG_INTERFACE, 'No pv_object_paths provided!')
-
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 		return '/'
 
 	@dbus.service.method(
@@ -321,24 +366,33 @@ class Vg(AutomatedProperties):
 			create_options):
 		# Make sure we have a dbus object representing it
 		pv_dests = []
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
-		Vg.validate_dbus_object(uuid, vg_name)
+		if dbo:
+			if len(pv_dests_and_ranges):
+				for pr in pv_dests_and_ranges:
+					pv_dbus_obj = cfg.om.get_object_by_path(pr[0])
+					if not pv_dbus_obj:
+						raise dbus.exceptions.DBusException(
+							VG_INTERFACE,
+							'PV Destination (%s) not found' % pr[0])
 
-		if len(pv_dests_and_ranges):
-			for pr in pv_dests_and_ranges:
-				pv_dbus_obj = cfg.om.get_object_by_path(pr[0])
-				if not pv_dbus_obj:
-					raise dbus.exceptions.DBusException(
-						VG_INTERFACE,
-						'PV Destination (%s) not found' % pr[0])
+					pv_dests.append((pv_dbus_obj.lvm_id, pr[1], pr[2]))
 
-				pv_dests.append((pv_dbus_obj.lvm_id, pr[1], pr[2]))
+			rc, out, err = cmdhandler.vg_lv_create(
+				vg_name, create_options, name, size_bytes, pv_dests)
 
-		rc, out, err = cmdhandler.vg_lv_create(
-			vg_name, create_options, name, size_bytes, pv_dests)
-
-		Vg.handle_execute(rc, out, err)
-		return Vg.fetch_new_lv(vg_name, name)
+			if rc == 0:
+				return Vg.fetch_new_lv(vg_name, name)
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -374,13 +428,25 @@ class Vg(AutomatedProperties):
 	def _lv_create_linear(uuid, vg_name, name, size_bytes,
 			thin_pool, create_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
-		rc, out, err = cmdhandler.vg_lv_create_linear(
-			vg_name, create_options, name, size_bytes, thin_pool)
+		if dbo:
+			rc, out, err = cmdhandler.vg_lv_create_linear(
+				vg_name, create_options, name, size_bytes, thin_pool)
 
-		Vg.handle_execute(rc, out, err)
-		return Vg.fetch_new_lv(vg_name, name)
+			if rc == 0:
+				created_lv = Vg.fetch_new_lv(vg_name, name)
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
+
+		return created_lv
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -400,12 +466,24 @@ class Vg(AutomatedProperties):
 	def _lv_create_striped(uuid, vg_name, name, size_bytes, num_stripes,
 			stripe_size_kb, thin_pool, create_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = cmdhandler.vg_lv_create_striped(
-			vg_name, create_options, name, size_bytes,
-			num_stripes, stripe_size_kb, thin_pool)
-		Vg.handle_execute(rc, out, err)
-		return Vg.fetch_new_lv(vg_name, name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.vg_lv_create_striped(
+				vg_name, create_options, name, size_bytes,
+				num_stripes, stripe_size_kb, thin_pool)
+			if rc == 0:
+				created_lv = Vg.fetch_new_lv(vg_name, name)
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE, 'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
+
+		return created_lv
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -428,11 +506,25 @@ class Vg(AutomatedProperties):
 	def _lv_create_mirror(uuid, vg_name, name, size_bytes,
 			num_copies, create_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = cmdhandler.vg_lv_create_mirror(
-			vg_name, create_options, name, size_bytes, num_copies)
-		Vg.handle_execute(rc, out, err)
-		return Vg.fetch_new_lv(vg_name, name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.vg_lv_create_mirror(
+				vg_name, create_options, name, size_bytes, num_copies)
+			if rc == 0:
+				created_lv = Vg.fetch_new_lv(vg_name, name)
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
+
+		return created_lv
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -453,12 +545,26 @@ class Vg(AutomatedProperties):
 	def _lv_create_raid(uuid, vg_name, name, raid_type, size_bytes,
 						num_stripes, stripe_size_kb, create_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = cmdhandler.vg_lv_create_raid(
-			vg_name, create_options, name, raid_type, size_bytes,
-			num_stripes, stripe_size_kb)
-		Vg.handle_execute(rc, out, err)
-		return Vg.fetch_new_lv(vg_name, name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.vg_lv_create_raid(
+				vg_name, create_options, name, raid_type, size_bytes,
+				num_stripes, stripe_size_kb)
+			if rc == 0:
+				created_lv = Vg.fetch_new_lv(vg_name, name)
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
+
+		return created_lv
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -479,27 +585,33 @@ class Vg(AutomatedProperties):
 	def _create_pool(uuid, vg_name, meta_data_lv, data_lv,
 						create_options, create_method):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
 		# Retrieve the full names for the metadata and data lv
 		md = cfg.om.get_object_by_path(meta_data_lv)
 		data = cfg.om.get_object_by_path(data_lv)
 
-		if md and data:
+		if dbo and md and data:
 
 			new_name = data.Name
 
 			rc, out, err = create_method(
 				md.lv_full_name(), data.lv_full_name(), create_options)
-
 			if rc == 0:
 				mt_remove_dbus_objects((md, data))
-
-			Vg.handle_execute(rc, out, err)
+				cache_pool_lv = Vg.fetch_new_lv(vg_name, new_name)
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
 
 		else:
 			msg = ""
 
+			if not dbo:
+				msg += 'VG with uuid %s and name %s not present!' % \
+					(uuid, vg_name)
+
 			if not md:
 				msg += 'Meta data LV with object path %s not present!' % \
 					(meta_data_lv)
@@ -510,7 +622,7 @@ class Vg(AutomatedProperties):
 
 			raise dbus.exceptions.DBusException(VG_INTERFACE, msg)
 
-		return Vg.fetch_new_lv(vg_name, new_name)
+		return cache_pool_lv
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -544,21 +656,33 @@ class Vg(AutomatedProperties):
 		pv_devices = []
 
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
-		# Check for existence of pv object paths
-		for p in pv_object_paths:
-			pv = cfg.om.get_object_by_path(p)
-			if pv:
-				pv_devices.append(pv.Name)
+		if dbo:
+			# Check for existence of pv object paths
+			for p in pv_object_paths:
+				pv = cfg.om.get_object_by_path(p)
+				if pv:
+					pv_devices.append(pv.Name)
+				else:
+					raise dbus.exceptions.DBusException(
+						VG_INTERFACE, 'PV object path = %s not found' % p)
+
+			rc, out, err = cmdhandler.pv_tag(
+				pv_devices, tags_add, tags_del, tag_options)
+			if rc == 0:
+				cfg.load()
+				return '/'
 			else:
 				raise dbus.exceptions.DBusException(
-					VG_INTERFACE, 'PV object path = %s not found' % p)
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
 
-		rc, out, err = cmdhandler.pv_tag(
-			pv_devices, tags_add, tags_del, tag_options)
-		Vg.handle_execute(rc, out, err)
-		return '/'
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -596,12 +720,25 @@ class Vg(AutomatedProperties):
 	@staticmethod
 	def _vg_add_rm_tags(uuid, vg_name, tags_add, tags_del, tag_options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
 
-		rc, out, err = cmdhandler.vg_tag(
-			vg_name, tags_add, tags_del, tag_options)
-		Vg.handle_execute(rc, out, err)
-		return '/'
+		if dbo:
+
+			rc, out, err = cmdhandler.vg_tag(
+				vg_name, tags_add, tags_del, tag_options)
+			if rc == 0:
+				dbo.refresh()
+				return '/'
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -638,10 +775,23 @@ class Vg(AutomatedProperties):
 	@staticmethod
 	def _vg_change_set(uuid, vg_name, method, value, options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = method(vg_name, value, options)
-		Vg.handle_execute(rc, out, err)
-		return '/'
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = method(vg_name, value, options)
+			if rc == 0:
+				dbo.refresh()
+				return '/'
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,
@@ -699,11 +849,23 @@ class Vg(AutomatedProperties):
 	def _vg_activate_deactivate(uuid, vg_name, activate, control_flags,
 								options):
 		# Make sure we have a dbus object representing it
-		Vg.validate_dbus_object(uuid, vg_name)
-		rc, out, err = cmdhandler.activate_deactivate(
-			'vgchange', vg_name, activate, control_flags, options)
-		Vg.handle_execute(rc, out, err)
-		return '/'
+		dbo = cfg.om.get_object_by_uuid_lvm_id(uuid, vg_name)
+
+		if dbo:
+			rc, out, err = cmdhandler.activate_deactivate(
+				'vgchange', vg_name, activate, control_flags, options)
+			if rc == 0:
+				cfg.load()
+				return '/'
+			else:
+				raise dbus.exceptions.DBusException(
+					VG_INTERFACE,
+					'Exit code %s, stderr = %s' % (str(rc), err))
+		else:
+			raise dbus.exceptions.DBusException(
+				VG_INTERFACE,
+				'VG with uuid %s and name %s not present!' %
+				(uuid, vg_name))
 
 	@dbus.service.method(
 		dbus_interface=VG_INTERFACE,

daemons/lvmetad/Makefile.in

@@ -16,7 +16,7 @@ top_srcdir = @top_srcdir@
 top_builddir = @top_builddir@
 
 SOURCES = lvmetad-core.c
-SOURCES2 = lvmetactl.c
+SOURCES2 = testclient.c
 
 TARGETS = lvmetad lvmetactl
 
@@ -28,19 +28,22 @@ CFLOW_TARGET = lvmetad
 
 include $(top_builddir)/make.tmpl
 
-CFLAGS_lvmetactl.o += $(EXTRA_EXEC_CFLAGS)
-CFLAGS_lvmetad-core.o += $(EXTRA_EXEC_CFLAGS)
 INCLUDES += -I$(top_srcdir)/libdaemon/server
-LDFLAGS += -L$(top_builddir)/libdaemon/server $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS)
-LIBS += $(RT_LIBS) $(DAEMON_LIBS) -ldevmapper $(PTHREAD_LIBS)
+LVMLIBS = -ldaemonserver $(LVMINTERNAL_LIBS) -ldevmapper
+
+LIBS += $(PTHREAD_LIBS)
+
+LDFLAGS += -L$(top_builddir)/libdaemon/server $(EXTRA_EXEC_LDFLAGS)
+CLDFLAGS += -L$(top_builddir)/libdaemon/server
+CFLAGS += $(EXTRA_EXEC_CFLAGS)
 
 lvmetad: $(OBJECTS) $(top_builddir)/libdaemon/client/libdaemonclient.a \
 		    $(top_builddir)/libdaemon/server/libdaemonserver.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) -ldaemonserver $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LVMLIBS) $(LIBS)
 
 lvmetactl: lvmetactl.o $(top_builddir)/libdaemon/client/libdaemonclient.a \
 	$(top_builddir)/libdaemon/server/libdaemonserver.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ lvmetactl.o $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ lvmetactl.o $(LVMLIBS)
 
 CLEAN_TARGETS += lvmetactl.o
 

daemons/lvmetad/lvmetad-client.h

@@ -25,7 +25,6 @@
 #define LVMETAD_DISABLE_REASON_LVM1		"LVM1"
 #define LVMETAD_DISABLE_REASON_DUPLICATES	"DUPLICATES"
 #define LVMETAD_DISABLE_REASON_VGRESTORE	"VGRESTORE"
-#define LVMETAD_DISABLE_REASON_REPAIR		"REPAIR"
 
 struct volume_group;
 

daemons/lvmetad/lvmetad-core.c

@@ -203,9 +203,8 @@ struct vg_info {
 #define GLFL_DISABLE_REASON_LVM1       0x00000008
 #define GLFL_DISABLE_REASON_DUPLICATES 0x00000010
 #define GLFL_DISABLE_REASON_VGRESTORE  0x00000020
-#define GLFL_DISABLE_REASON_REPAIR     0x00000040
 
-#define GLFL_DISABLE_REASON_ALL (GLFL_DISABLE_REASON_DIRECT | GLFL_DISABLE_REASON_REPAIR | GLFL_DISABLE_REASON_LVM1 | GLFL_DISABLE_REASON_DUPLICATES | GLFL_DISABLE_REASON_VGRESTORE)
+#define GLFL_DISABLE_REASON_ALL (GLFL_DISABLE_REASON_DIRECT | GLFL_DISABLE_REASON_LVM1 | GLFL_DISABLE_REASON_DUPLICATES | GLFL_DISABLE_REASON_VGRESTORE)
 
 #define VGFL_INVALID 0x00000001
 
@@ -258,21 +257,6 @@ static void destroy_metadata_hashes(lvmetad_state *s)
 	dm_hash_iterate(n, s->pvid_to_pvmeta)
 		dm_config_destroy(dm_hash_get_data(s->pvid_to_pvmeta, n));
 
-	dm_hash_iterate(n, s->vgid_to_vgname)
-		dm_free(dm_hash_get_data(s->vgid_to_vgname, n));
-
-	dm_hash_iterate(n, s->vgname_to_vgid)
-		dm_free(dm_hash_get_data(s->vgname_to_vgid, n));
-
-	dm_hash_iterate(n, s->vgid_to_info)
-		dm_free(dm_hash_get_data(s->vgid_to_info, n));
-
-	dm_hash_iterate(n, s->device_to_pvid)
-		dm_free(dm_hash_get_data(s->device_to_pvid, n));
-
-	dm_hash_iterate(n, s->pvid_to_vgid)
-		dm_free(dm_hash_get_data(s->pvid_to_vgid, n));
-
 	dm_hash_destroy(s->pvid_to_pvmeta);
 	dm_hash_destroy(s->vgid_to_metadata);
 	dm_hash_destroy(s->vgid_to_vgname);
@@ -808,8 +792,7 @@ static int _update_pvid_to_vgid(lvmetad_state *s, struct dm_config_tree *vg,
 
 		if ((mode == REMOVE_EMPTY) && vgid_old) {
 			/* This copies the vgid_old string, doesn't reference it. */
-			if ((dm_hash_lookup(to_check, vgid_old) != (void*) 1) &&
-			    !dm_hash_insert(to_check, vgid_old, (void*) 1)) {
+			if (!dm_hash_insert(to_check, vgid_old, (void*) 1)) {
 				ERROR(s, "update_pvid_to_vgid out of memory for hash insert vgid_old %s", vgid_old);
 				goto abort_daemon;
 			}
@@ -885,13 +868,16 @@ static int remove_metadata(lvmetad_state *s, const char *vgid, int update_pvids)
 
 	/* free the unmapped data */
 
+	if (info_lookup)
+		dm_free(info_lookup);
 	if (meta_lookup)
 		dm_config_destroy(meta_lookup);
+	if (name_lookup)
+		dm_free(name_lookup);
 	if (outdated_pvs_lookup)
 		dm_config_destroy(outdated_pvs_lookup);
-	dm_free(info_lookup);
-	dm_free(name_lookup);
-	dm_free(vgid_lookup);
+	if (vgid_lookup)
+		dm_free(vgid_lookup);
 	return 1;
 }
 
@@ -1218,8 +1204,10 @@ static int _update_metadata_add_new(lvmetad_state *s, const char *new_name, cons
 out:
 out_free:
 	if (!new_name_dup || !new_vgid_dup || abort_daemon) {
-		dm_free(new_name_dup);
-		dm_free(new_vgid_dup);
+		if (new_name_dup)
+			dm_free(new_name_dup);
+		if (new_vgid_dup)
+			dm_free(new_vgid_dup);
 		ERROR(s, "lvmetad could not be updated and is aborting.");
 		exit(EXIT_FAILURE);
 	}
@@ -1809,7 +1797,8 @@ static response pv_gone(lvmetad_state *s, request r)
 	}
 
 	dm_config_destroy(pvmeta);
-	dm_free(old_pvid);
+	if (old_pvid)
+		dm_free(old_pvid);
 
 	return daemon_reply_simple("OK", NULL );
 }
@@ -1922,7 +1911,7 @@ static response pv_found(lvmetad_state *s, request r)
 	const char *arg_pvid = NULL;
 	const char *arg_pvid_lookup = NULL;
 	const char *new_pvid = NULL;
-	char *new_pvid_dup = NULL;
+	const char *new_pvid_dup = NULL;
 	const char *arg_name = NULL;
 	const char *arg_vgid = NULL;
 	const char *arg_vgid_lookup = NULL;
@@ -2085,7 +2074,7 @@ static response pv_found(lvmetad_state *s, request r)
 		if (!(new_pvid_dup = dm_strdup(new_pvid)))
 			goto nomem_free1;
 
-		if (!dm_hash_insert_binary(s->device_to_pvid, &new_device, sizeof(new_device), new_pvid_dup))
+		if (!dm_hash_insert_binary(s->device_to_pvid, &new_device, sizeof(new_device), (char *)new_pvid_dup))
 			goto nomem_free2;
 
 		if (!dm_hash_insert(s->pvid_to_pvmeta, new_pvid, new_pvmeta))
@@ -2121,8 +2110,6 @@ static response pv_found(lvmetad_state *s, request r)
 				DEBUGLOG(s, "pv_found ignore duplicate device %" PRIu64 " of existing PV for pvid %s",
 				         arg_device, arg_pvid);
 				dm_config_destroy(new_pvmeta);
-				/* device_to_pvid no longer references prev_pvid_lookup */
-				dm_free((void*)prev_pvid_on_dev);
 				s->flags |= GLFL_DISABLE;
 				s->flags |= GLFL_DISABLE_REASON_DUPLICATES;
 				return reply_fail("Ignore duplicate PV");
@@ -2133,7 +2120,7 @@ static response pv_found(lvmetad_state *s, request r)
 		if (!(new_pvid_dup = dm_strdup(new_pvid)))
 			goto nomem_free1;
 
-		if (!dm_hash_insert_binary(s->device_to_pvid, &arg_device, sizeof(arg_device), new_pvid_dup))
+		if (!dm_hash_insert_binary(s->device_to_pvid, &arg_device, sizeof(arg_device), (char *)new_pvid_dup))
 			goto nomem_free2;
 
 		if (!dm_hash_insert(s->pvid_to_pvmeta, new_pvid, new_pvmeta))
@@ -2233,7 +2220,8 @@ static response pv_found(lvmetad_state *s, request r)
 	}
 
 	/* This was unhashed from device_to_pvid above. */
-	dm_free((void *)prev_pvid_on_dev);
+	if (prev_pvid_on_dev)
+		dm_free((void *)prev_pvid_on_dev);
 
 	return daemon_reply_simple("OK",
 				   "status = %s", vg_status,
@@ -2245,7 +2233,7 @@ static response pv_found(lvmetad_state *s, request r)
 				   NULL);
 
  nomem_free2:
-	dm_free(new_pvid_dup);
+	dm_free((char *)new_pvid_dup);
  nomem_free1:
 	dm_config_destroy(new_pvmeta);
  nomem:
@@ -2367,8 +2355,6 @@ static response set_global_info(lvmetad_state *s, request r)
 	if ((reason = daemon_request_str(r, "disable_reason", NULL))) {
 		if (strstr(reason, LVMETAD_DISABLE_REASON_DIRECT))
 			reason_flags |= GLFL_DISABLE_REASON_DIRECT;
-		if (strstr(reason, LVMETAD_DISABLE_REASON_REPAIR))
-			reason_flags |= GLFL_DISABLE_REASON_REPAIR;
 		if (strstr(reason, LVMETAD_DISABLE_REASON_LVM1))
 			reason_flags |= GLFL_DISABLE_REASON_LVM1;
 		if (strstr(reason, LVMETAD_DISABLE_REASON_DUPLICATES))
@@ -2432,9 +2418,8 @@ static response get_global_info(lvmetad_state *s, request r)
 	pid = (int)daemon_request_int(r, "pid", 0);
 
 	if (s->flags & GLFL_DISABLE) {
-		snprintf(reason, REASON_BUF_SIZE - 1, "%s%s%s%s%s",
+		snprintf(reason, REASON_BUF_SIZE - 1, "%s%s%s%s",
 			 (s->flags & GLFL_DISABLE_REASON_DIRECT)     ? LVMETAD_DISABLE_REASON_DIRECT "," : "",
-			 (s->flags & GLFL_DISABLE_REASON_REPAIR)     ? LVMETAD_DISABLE_REASON_REPAIR "," : "",
 			 (s->flags & GLFL_DISABLE_REASON_LVM1)       ? LVMETAD_DISABLE_REASON_LVM1 "," : "",
 			 (s->flags & GLFL_DISABLE_REASON_DUPLICATES) ? LVMETAD_DISABLE_REASON_DUPLICATES "," : "",
 			 (s->flags & GLFL_DISABLE_REASON_VGRESTORE)  ? LVMETAD_DISABLE_REASON_VGRESTORE "," : "");
@@ -2572,12 +2557,14 @@ static void _dump_pairs(struct buffer *buf, struct dm_hash_table *ht, const char
 	dm_hash_iterate(n, ht) {
 		const char *key = dm_hash_get_key(ht, n),
 			   *val = dm_hash_get_data(ht, n);
+		buffer_append(buf, "    ");
 		if (int_key)
-			(void) dm_asprintf(&append, "    %d = \"%s\"\n", *(const int*)key, val);
+			(void) dm_asprintf(&append, "%d = \"%s\"", *(const int*)key, val);
 		else
-			(void) dm_asprintf(&append, "    %s = \"%s\"\n", key, val);
+			(void) dm_asprintf(&append, "%s = \"%s\"", key, val);
 		if (append)
 			buffer_append(buf, append);
+		buffer_append(buf, "\n");
 		dm_free(append);
 	}
 	buffer_append(buf, "}\n");
@@ -2595,9 +2582,11 @@ static void _dump_info_version(struct buffer *buf, struct dm_hash_table *ht, con
 	while (n) {
 		const char *key = dm_hash_get_key(ht, n);
 		info = dm_hash_get_data(ht, n);
-		(void) dm_asprintf(&append, "    %s = %lld\n", key, (long long)info->external_version);
+		buffer_append(buf, "    ");
+		(void) dm_asprintf(&append, "%s = %lld", key, (long long)info->external_version);
 		if (append)
 			buffer_append(buf, append);
+		buffer_append(buf, "\n");
 		dm_free(append);
 		n = dm_hash_get_next(ht, n);
 	}
@@ -2616,9 +2605,11 @@ static void _dump_info_flags(struct buffer *buf, struct dm_hash_table *ht, const
 	while (n) {
 		const char *key = dm_hash_get_key(ht, n);
 		info = dm_hash_get_data(ht, n);
-		(void) dm_asprintf(&append, "    %s = %llx\n", key, (long long)info->flags);
+		buffer_append(buf, "    ");
+		(void) dm_asprintf(&append, "%s = %llx", key, (long long)info->flags);
 		if (append)
 			buffer_append(buf, append);
+		buffer_append(buf, "\n");
 		dm_free(append);
 		n = dm_hash_get_next(ht, n);
 	}
@@ -2754,8 +2745,7 @@ static response handler(daemon_state s, client_handle h, request r)
 							   "expected = %s", state->token,
 							   "received = %s", token,
 							   "update_pid = " FMTd64, (int64_t)state->update_pid,
-							   "reason = %s", "another command has populated the cache",
-							   NULL);
+							   "reason = %s", "another command has populated the cache");
 			}
 
 			DEBUGLOG(state, "token_update end len %d pid %d new token %s",
@@ -2788,8 +2778,7 @@ static response handler(daemon_state s, client_handle h, request r)
 					   "expected = %s", state->token,
 					   "received = %s", token,
 					   "update_pid = " FMTd64, (int64_t)state->update_pid,
-					   "reason = %s", "another command has populated the cache",
-					   NULL);
+					   "reason = %s", "another command has populated the cache");
 	}
 
 	/* If a pid doing update was cancelled, ignore its update messages. */
@@ -2804,8 +2793,7 @@ static response handler(daemon_state s, client_handle h, request r)
 					   "expected = %s", state->token,
 					   "received = %s", token,
 					   "update_pid = " FMTd64, (int64_t)state->update_pid,
-					   "reason = %s", "another command has populated the lvmetad cache",
-					   NULL);
+					   "reason = %s", "another command has populated the lvmetad cache");
 	}
 
 	pthread_mutex_unlock(&state->token_lock);

daemons/lvmlockd/Makefile.in

@@ -19,12 +19,10 @@ SOURCES = lvmlockd-core.c
 
 ifeq ("@BUILD_LOCKDSANLOCK@", "yes")
   SOURCES += lvmlockd-sanlock.c
-  LOCK_LIBS += -lsanlock_client
 endif
 
 ifeq ("@BUILD_LOCKDDLM@", "yes")
   SOURCES += lvmlockd-dlm.c
-  LOCK_LIBS += -ldlm_lt
 endif
 
 TARGETS = lvmlockd lvmlockctl
@@ -33,17 +31,29 @@ TARGETS = lvmlockd lvmlockctl
 
 include $(top_builddir)/make.tmpl
 
-CFLAGS += $(EXTRA_EXEC_CFLAGS)
 INCLUDES += -I$(top_srcdir)/libdaemon/server
-LDFLAGS += -L$(top_builddir)/libdaemon/server $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS)
-LIBS += $(RT_LIBS) $(DAEMON_LIBS) -ldevmapper $(PTHREAD_LIBS)
+LVMLIBS = -ldaemonserver $(LVMINTERNAL_LIBS) -ldevmapper
+
+LIBS += $(PTHREAD_LIBS)
+
+ifeq ("@BUILD_LOCKDSANLOCK@", "yes")
+  LIBS += -lsanlock_client
+endif
+
+ifeq ("@BUILD_LOCKDDLM@", "yes")
+  LIBS += -ldlm_lt
+endif
+
+LDFLAGS += -L$(top_builddir)/libdaemon/server
+CLDFLAGS += -L$(top_builddir)/libdaemon/server
 
 lvmlockd: $(OBJECTS) $(top_builddir)/libdaemon/client/libdaemonclient.a \
 		    $(top_builddir)/libdaemon/server/libdaemonserver.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LOCK_LIBS) -ldaemonserver $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LVMLIBS) $(LIBS)
 
-lvmlockctl: lvmlockctl.o $(top_builddir)/libdaemon/client/libdaemonclient.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ lvmlockctl.o $(LIBS)
+lvmlockctl: lvmlockctl.o $(top_builddir)/libdaemon/client/libdaemonclient.a \
+		    $(top_builddir)/libdaemon/server/libdaemonserver.a
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ lvmlockctl.o $(LVMLIBS)
 
 install_lvmlockd: lvmlockd
 	$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)

daemons/lvmlockd/lvmlockd-core.c

@@ -19,7 +19,6 @@
 #include "lvm-version.h"
 #include "lvmetad-client.h"
 #include "lvmlockd-client.h"
-#include "dm-ioctl.h" /* for DM_UUID_LEN */
 
 /* #include <assert.h> */
 #include <errno.h>
@@ -3304,6 +3303,7 @@ static int work_init_lv(struct action *act)
 		lm_type = ls->lm_type;
 		memcpy(vg_args, ls->vg_args, MAX_ARGS);
 		free_offset = ls->free_lock_offset;
+		ls->free_lock_offset = 0;
 	}
 	pthread_mutex_unlock(&lockspaces_mutex);
 
@@ -4907,10 +4907,14 @@ static int get_lockd_vgs(struct list_head *vg_lockd)
 				continue;
 
 			for (lv_cn = md_cn->child; lv_cn; lv_cn = lv_cn->sib) {
+				snprintf(find_str_path, PATH_MAX, "%s/lock_type", lv_cn->key);
+				lock_type = dm_config_find_str(lv_cn, find_str_path, NULL);
+
+				if (!lock_type)
+					continue;
+
 				snprintf(find_str_path, PATH_MAX, "%s/lock_args", lv_cn->key);
 				lock_args = dm_config_find_str(lv_cn, find_str_path, NULL);
-				if (!lock_args)
-					continue;
 
 				snprintf(find_str_path, PATH_MAX, "%s/id", lv_cn->key);
 				lv_uuid = dm_config_find_str(lv_cn, find_str_path, NULL);
@@ -4956,7 +4960,7 @@ out:
 	return rv;
 }
 
-static char _dm_uuid[DM_UUID_LEN];
+static char _dm_uuid[64];
 
 static char *get_dm_uuid(char *dm_name)
 {
@@ -5175,17 +5179,20 @@ static void adopt_locks(void)
 	 * Get list of lockspaces from lock managers.
 	 * Get list of VGs from lvmetad with a lockd type.
 	 * Get list of active lockd type LVs from /dev.
+	 *
+	 * ECONNREFUSED means the lock manager is not running.
+	 * This is expected for at least one of them.
 	 */
 
-	if (lm_support_dlm() && lm_is_running_dlm()) {
+	if (lm_support_dlm()) {
 		rv = lm_get_lockspaces_dlm(&ls_found);
-		if (rv < 0)
+		if ((rv < 0) && (rv != -ECONNREFUSED))
 			goto fail;
 	}
 
-	if (lm_support_sanlock() && lm_is_running_sanlock()) {
+	if (lm_support_sanlock()) {
 		rv = lm_get_lockspaces_sanlock(&ls_found);
-		if (rv < 0)
+		if ((rv < 0) && (rv != -ECONNREFUSED))
 			goto fail;
 	}
 
@@ -5262,7 +5269,7 @@ static void adopt_locks(void)
 	list_for_each_entry_safe(ls1, l1safe, &ls_found, list) {
 
 		/* The dlm global lockspace is special and doesn't match a VG. */
-		if ((ls1->lm_type == LD_LM_DLM) && !strcmp(ls1->name, gl_lsname_dlm)) {
+		if (!strcmp(ls1->name, gl_lsname_dlm)) {
 			list_del(&ls1->list);
 			free(ls1);
 			continue;

daemons/lvmlockd/lvmlockd-sanlock.c

@@ -224,10 +224,7 @@ static int lock_lv_offset_from_args(char *lv_args, uint64_t *lock_lv_offset)
 	if (rv < 0)
 		return rv;
 
-	errno = 0;
 	*lock_lv_offset = strtoull(offset_str, NULL, 10);
-	if (errno)
-		return -1;
 	return 0;
 }
 
@@ -938,9 +935,7 @@ int lm_find_free_lock_sanlock(struct lockspace *ls, uint64_t *free_offset)
 	struct lm_sanlock *lms = (struct lm_sanlock *)ls->lm_data;
 	struct sanlk_resourced rd;
 	uint64_t offset;
-	uint64_t start_offset;
 	int rv;
-	int round = 0;
 
 	if (daemon_test) {
 		*free_offset = (1048576 * LV_LOCK_BEGIN) + (1048576 * (daemon_test_lv_count + 1));
@@ -953,22 +948,9 @@ int lm_find_free_lock_sanlock(struct lockspace *ls, uint64_t *free_offset)
 	rd.rs.num_disks = 1;
 	strncpy(rd.rs.disks[0].path, lms->ss.host_id_disk.path, SANLK_PATH_LEN-1);
 
-	if (ls->free_lock_offset)
-		offset = ls->free_lock_offset;
-	else
-		offset = lms->align_size * LV_LOCK_BEGIN;
-
-	start_offset = offset;
+	offset = lms->align_size * LV_LOCK_BEGIN;
 
 	while (1) {
-		if (offset >= start_offset && round) {
-			/* This indicates the all space are allocated. */
-			log_debug("S %s init_lv_san read back to start offset %llu",
-				ls->name, (unsigned long long)offset);
-			rv = -EMSGSIZE;
-			return rv;
-		}
-
 		rd.rs.disks[0].offset = offset;
 
 		memset(rd.rs.name, 0, SANLK_NAME_LEN);
@@ -978,14 +960,7 @@ int lm_find_free_lock_sanlock(struct lockspace *ls, uint64_t *free_offset)
 			/* This indicates the end of the device is reached. */
 			log_debug("S %s find_free_lock_san read limit offset %llu",
 				  ls->name, (unsigned long long)offset);
-
-			/* remember the NO SPACE offset, if no free area left,
-			 * search from this offset after extend */
-			*free_offset = offset;
-
-			offset = lms->align_size * LV_LOCK_BEGIN;
-			round = 1;
-			continue;
+			return -EMSGSIZE;
 		}
 
 		/*

daemons/lvmpolld/Makefile.in

@@ -27,14 +27,18 @@ CFLOW_TARGET = lvmpolld
 
 include $(top_builddir)/make.tmpl
 
-CFLAGS += $(EXTRA_EXEC_CFLAGS)
 INCLUDES += -I$(top_srcdir)/libdaemon/server
-LDFLAGS += -L$(top_builddir)/libdaemon/server $(EXTRA_EXEC_LDFLAGS) $(ELDFLAGS)
-LIBS += $(DAEMON_LIBS) -ldaemonserver -ldevmapper $(PTHREAD_LIBS)
+LVMLIBS = -ldaemonserver $(LVMINTERNAL_LIBS) -ldevmapper
+
+LIBS += $(PTHREAD_LIBS)
+
+LDFLAGS += -L$(top_builddir)/libdaemon/server $(DAEMON_LDFLAGS)
+CLDFLAGS += -L$(top_builddir)/libdaemon/server
+CFLAGS += $(DAEMON_CFLAGS)
 
 lvmpolld: $(OBJECTS) $(top_builddir)/libdaemon/client/libdaemonclient.a \
 		    $(top_builddir)/libdaemon/server/libdaemonserver.a
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LIBS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) $(LVMLIBS) $(LIBS)
 
 install_lvmpolld: lvmpolld
 	$(INSTALL_PROGRAM) -D $< $(sbindir)/$(<F)

daemons/lvmpolld/lvmpolld-cmd-utils.c

@@ -19,12 +19,10 @@
 
 #define MIN_ARGV_SIZE  8
 
-static const char *const polling_ops[] = {
-	[PVMOVE] = LVMPD_REQ_PVMOVE,
-	[CONVERT] = LVMPD_REQ_CONVERT,
-	[MERGE] = LVMPD_REQ_MERGE,
-	[MERGE_THIN] = LVMPD_REQ_MERGE_THIN
-};
+static const char *const const polling_ops[] = { [PVMOVE] = LVMPD_REQ_PVMOVE,
+						 [CONVERT] = LVMPD_REQ_CONVERT,
+						 [MERGE] = LVMPD_REQ_MERGE,
+						 [MERGE_THIN] = LVMPD_REQ_MERGE_THIN };
 
 const char *polling_op(enum poll_type type)
 {

daemons/lvmpolld/lvmpolld-data-utils.c

@@ -19,8 +19,6 @@
 #include <fcntl.h>
 #include <signal.h>
 
-static const char LVM_SYSTEM_DIR[] = "LVM_SYSTEM_DIR=";
-
 static char *_construct_full_lvname(const char *vgname, const char *lvname)
 {
 	char *name;
@@ -54,7 +52,7 @@ static char *_construct_lvm_system_dir_env(const char *sysdir)
 
 	*env = '\0';
 
-	if (sysdir && dm_snprintf(env, l, "%s%s", LVM_SYSTEM_DIR, sysdir) < 0) {
+	if (sysdir && dm_snprintf(env, l, "LVM_SYSTEM_DIR=%s", sysdir) < 0) {
 		dm_free(env);
 		env = NULL;
 	}
@@ -261,8 +259,8 @@ static void _pdlv_locked_dump(struct buffer *buff, const struct lvmpolld_lv *pdl
 		buffer_append(buff, tmp);
 	if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvm_command_interval=\"%s\"\n", pdlv->sinterval ?: "<undefined>") > 0)
 		buffer_append(buff, tmp);
-	if (dm_snprintf(tmp, sizeof(tmp), "\t\t%s\"%s\"\n", LVM_SYSTEM_DIR,
-			(*pdlv->lvm_system_dir_env ? (pdlv->lvm_system_dir_env + (sizeof(LVM_SYSTEM_DIR) - 1)) : "<undefined>")) > 0)
+	if (dm_snprintf(tmp, sizeof(tmp), "\t\tLVM_SYSTEM_DIR=\"%s\"\n",
+			(*pdlv->lvm_system_dir_env ? (pdlv->lvm_system_dir_env + strlen("LVM_SYSTEM_DIR=")) : "<undefined>")) > 0)
 		buffer_append(buff, tmp);
 	if (dm_snprintf(tmp, sizeof(tmp), "\t\tlvm_command_pid=%d\n", pdlv->cmd_pid) > 0)
 		buffer_append(buff, tmp);

doc/kernel/cache.txt

@@ -207,10 +207,6 @@ Optional feature arguments are:
 		   block, then the cache block is invalidated.
 		   To enable passthrough mode the cache must be clean.
 
-   metadata2	: use version 2 of the metadata.  This stores the dirty bits
-                  in a separate btree, which improves speed of shutting
-		  down the cache.
-
 A policy called 'default' is always registered.  This is an alias for
 the policy we currently think is giving best all round performance.
 
@@ -290,7 +286,7 @@ message, which takes an arbitrary number of cblock ranges.  Each cblock
 range's end value is "one past the end", meaning 5-10 expresses a range
 of values from 5 to 9.  Each cblock must be expressed as a decimal
 value, in the future a variant message that takes cblock ranges
-expressed in hexadecimal may be needed to better support efficient
+expressed in hexidecimal may be needed to better support efficient
 invalidation of larger caches.  The cache must be in passthrough mode
 when invalidate_cblocks is used.
 

doc/kernel/crypt.txt

@@ -11,57 +11,23 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
 	      <offset> [<#opt_params> <opt_params>]
 
 <cipher>
-    Encryption cipher, encryption mode and Initial Vector (IV) generator.
-
-    The cipher specifications format is:
-       cipher[:keycount]-chainmode-ivmode[:ivopts]
+    Encryption cipher and an optional IV generation mode.
+    (In format cipher[:keycount]-chainmode-ivmode[:ivopts]).
     Examples:
+       des
        aes-cbc-essiv:sha256
-       aes-xts-plain64
-       serpent-xts-plain64
+       twofish-ecb
 
-    Cipher format also supports direct specification with kernel crypt API
-    format (selected by capi: prefix). The IV specification is the same
-    as for the first format type.
-    This format is mainly used for specification of authenticated modes.
-
-    The crypto API cipher specifications format is:
-        capi:cipher_api_spec-ivmode[:ivopts]
-    Examples:
-        capi:cbc(aes)-essiv:sha256
-        capi:xts(aes)-plain64
-    Examples of authenticated modes:
-        capi:gcm(aes)-random
-        capi:authenc(hmac(sha256),xts(aes))-random
-        capi:rfc7539(chacha20,poly1305)-random
-
-    The /proc/crypto contains a list of curently loaded crypto modes.
+    /proc/crypto contains supported crypto modes
 
 <key>
-    Key used for encryption. It is encoded either as a hexadecimal number
-    or it can be passed as <key_string> prefixed with single colon
-    character (':') for keys residing in kernel keyring service.
+    Key used for encryption. It is encoded as a hexadecimal number.
     You can only use key sizes that are valid for the selected cipher
     in combination with the selected iv mode.
     Note that for some iv modes the key string can contain additional
     keys (for example IV seed) so the key contains more parts concatenated
     into a single string.
 
-<key_string>
-    The kernel keyring key is identified by string in following format:
-    <key_size>:<key_type>:<key_description>.
-
-<key_size>
-    The encryption key size in bytes. The kernel key payload size must match
-    the value passed in <key_size>.
-
-<key_type>
-    Either 'logon' or 'user' kernel key type.
-
-<key_description>
-    The kernel keyring key description crypt target should look for
-    when loading key of <key_type>.
-
 <keycount>
     Multi-key compatibility mode. You can define <keycount> keys and
     then sectors are encrypted according to their offsets (sector 0 uses key0;
@@ -110,32 +76,6 @@ submit_from_crypt_cpus
     thread because it benefits CFQ to have writes submitted using the
     same context.
 
-integrity:<bytes>:<type>
-    The device requires additional <bytes> metadata per-sector stored
-    in per-bio integrity structure. This metadata must by provided
-    by underlying dm-integrity target.
-
-    The <type> can be "none" if metadata is used only for persistent IV.
-
-    For Authenticated Encryption with Additional Data (AEAD)
-    the <type> is "aead". An AEAD mode additionally calculates and verifies
-    integrity for the encrypted device. The additional space is then
-    used for storing authentication tag (and persistent IV if needed).
-
-sector_size:<bytes>
-    Use <bytes> as the encryption unit instead of 512 bytes sectors.
-    This option can be in range 512 - 4096 bytes and must be power of two.
-    Virtual device will announce this size as a minimal IO and logical sector.
-
-iv_large_sectors
-   IV generators will use sector number counted in <sector_size> units
-   instead of default 512 bytes sectors.
-
-   For example, if <sector_size> is 4096 bytes, plain64 IV for the second
-   sector will be 8 (without flag) and 1 if iv_large_sectors is present.
-   The <iv_offset> must be multiple of <sector_size> (in 512 bytes units)
-   if this flag is specified.
-
 Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
@@ -145,13 +85,7 @@ https://gitlab.com/cryptsetup/cryptsetup
 [[
 #!/bin/sh
 # Create a crypt device using dmsetup
-dmsetup create crypt1 --table "0 `blockdev --getsz $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0"
-]]
-
-[[
-#!/bin/sh
-# Create a crypt device using dmsetup when encryption key is stored in keyring service
-dmsetup create crypt2 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 :32:logon:my_prefix:my_key 0 $1 0"
+dmsetup create crypt1 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0"
 ]]
 
 [[

doc/kernel/delay.txt

@@ -16,12 +16,12 @@ Example scripts
 [[
 #!/bin/sh
 # Create device delaying rw operation for 500ms
-echo "0 `blockdev --getsz $1` delay $1 0 500" | dmsetup create delayed
+echo "0 `blockdev --getsize $1` delay $1 0 500" | dmsetup create delayed
 ]]
 
 [[
 #!/bin/sh
 # Create device delaying only write operation for 500ms and
 # splitting reads and writes to different devices $1 $2
-echo "0 `blockdev --getsz $1` delay $1 0 0 $2 0 500" | dmsetup create delayed
+echo "0 `blockdev --getsize $1` delay $1 0 0 $2 0 500" | dmsetup create delayed
 ]]

doc/kernel/flakey.txt

@@ -42,7 +42,7 @@ Optional feature parameters:
     <direction>: Either 'r' to corrupt reads or 'w' to corrupt writes.
 		 'w' is incompatible with drop_writes.
     <value>: The value (from 0-255) to write.
-    <flags>: Perform the replacement only if bio->bi_opf has all the
+    <flags>: Perform the replacement only if bio->bi_rw has all the
 	     selected flags set.
 
 Examples:

doc/kernel/integrity.txt

@@ -1,199 +0,0 @@
-The dm-integrity target emulates a block device that has additional
-per-sector tags that can be used for storing integrity information.
-
-A general problem with storing integrity tags with every sector is that
-writing the sector and the integrity tag must be atomic - i.e. in case of
-crash, either both sector and integrity tag or none of them is written.
-
-To guarantee write atomicity, the dm-integrity target uses journal, it
-writes sector data and integrity tags into a journal, commits the journal
-and then copies the data and integrity tags to their respective location.
-
-The dm-integrity target can be used with the dm-crypt target - in this
-situation the dm-crypt target creates the integrity data and passes them
-to the dm-integrity target via bio_integrity_payload attached to the bio.
-In this mode, the dm-crypt and dm-integrity targets provide authenticated
-disk encryption - if the attacker modifies the encrypted device, an I/O
-error is returned instead of random data.
-
-The dm-integrity target can also be used as a standalone target, in this
-mode it calculates and verifies the integrity tag internally. In this
-mode, the dm-integrity target can be used to detect silent data
-corruption on the disk or in the I/O path.
-
-
-When loading the target for the first time, the kernel driver will format
-the device. But it will only format the device if the superblock contains
-zeroes. If the superblock is neither valid nor zeroed, the dm-integrity
-target can't be loaded.
-
-To use the target for the first time:
-1. overwrite the superblock with zeroes
-2. load the dm-integrity target with one-sector size, the kernel driver
-	will format the device
-3. unload the dm-integrity target
-4. read the "provided_data_sectors" value from the superblock
-5. load the dm-integrity target with the the target size
-	"provided_data_sectors"
-6. if you want to use dm-integrity with dm-crypt, load the dm-crypt target
-	with the size "provided_data_sectors"
-
-
-Target arguments:
-
-1. the underlying block device
-
-2. the number of reserved sector at the beginning of the device - the
-	dm-integrity won't read of write these sectors
-
-3. the size of the integrity tag (if "-" is used, the size is taken from
-	the internal-hash algorithm)
-
-4. mode:
-	D - direct writes (without journal) - in this mode, journaling is
-		not used and data sectors and integrity tags are written
-		separately. In case of crash, it is possible that the data
-		and integrity tag doesn't match.
-	J - journaled writes - data and integrity tags are written to the
-		journal and atomicity is guaranteed. In case of crash,
-		either both data and tag or none of them are written. The
-		journaled mode degrades write throughput twice because the
-		data have to be written twice.
-	R - recovery mode - in this mode, journal is not replayed,
-		checksums are not checked and writes to the device are not
-		allowed. This mode is useful for data recovery if the
-		device cannot be activated in any of the other standard
-		modes.
-
-5. the number of additional arguments
-
-Additional arguments:
-
-journal_sectors:number
-	The size of journal, this argument is used only if formatting the
-	device. If the device is already formatted, the value from the
-	superblock is used.
-
-interleave_sectors:number
-	The number of interleaved sectors. This values is rounded down to
-	a power of two. If the device is already formatted, the value from
-	the superblock is used.
-
-buffer_sectors:number
-	The number of sectors in one buffer. The value is rounded down to
-	a power of two.
-
-	The tag area is accessed using buffers, the buffer size is
-	configurable. The large buffer size means that the I/O size will
-	be larger, but there could be less I/Os issued.
-
-journal_watermark:number
-	The journal watermark in percents. When the size of the journal
-	exceeds this watermark, the thread that flushes the journal will
-	be started.
-
-commit_time:number
-	Commit time in milliseconds. When this time passes, the journal is
-	written. The journal is also written immediatelly if the FLUSH
-	request is received.
-
-internal_hash:algorithm(:key)	(the key is optional)
-	Use internal hash or crc.
-	When this argument is used, the dm-integrity target won't accept
-	integrity tags from the upper target, but it will automatically
-	generate and verify the integrity tags.
-
-	You can use a crc algorithm (such as crc32), then integrity target
-	will protect the data against accidental corruption.
-	You can also use a hmac algorithm (for example
-	"hmac(sha256):0123456789abcdef"), in this mode it will provide
-	cryptographic authentication of the data without encryption.
-
-	When this argument is not used, the integrity tags are accepted
-	from an upper layer target, such as dm-crypt. The upper layer
-	target should check the validity of the integrity tags.
-
-journal_crypt:algorithm(:key)	(the key is optional)
-	Encrypt the journal using given algorithm to make sure that the
-	attacker can't read the journal. You can use a block cipher here
-	(such as "cbc(aes)") or a stream cipher (for example "chacha20",
-	"salsa20", "ctr(aes)" or "ecb(arc4)").
-
-	The journal contains history of last writes to the block device,
-	an attacker reading the journal could see the last sector nubmers
-	that were written. From the sector numbers, the attacker can infer
-	the size of files that were written. To protect against this
-	situation, you can encrypt the journal.
-
-journal_mac:algorithm(:key)	(the key is optional)
-	Protect sector numbers in the journal from accidental or malicious
-	modification. To protect against accidental modification, use a
-	crc algorithm, to protect against malicious modification, use a
-	hmac algorithm with a key.
-
-	This option is not needed when using internal-hash because in this
-	mode, the integrity of journal entries is checked when replaying
-	the journal. Thus, modified sector number would be detected at
-	this stage.
-
-block_size:number
-	The size of a data block in bytes.  The larger the block size the
-	less overhead there is for per-block integrity metadata.
-	Supported values are 512, 1024, 2048 and 4096 bytes.  If not
-	specified the default block size is 512 bytes.
-
-The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
-be changed when reloading the target (load an inactive table and swap the
-tables with suspend and resume). The other arguments should not be changed
-when reloading the target because the layout of disk data depend on them
-and the reloaded target would be non-functional.
-
-
-The layout of the formatted block device:
-* reserved sectors (they are not used by this target, they can be used for
-  storing LUKS metadata or for other purpose), the size of the reserved
-  area is specified in the target arguments
-* superblock (4kiB)
-	* magic string - identifies that the device was formatted
-	* version
-	* log2(interleave sectors)
-	* integrity tag size
-	* the number of journal sections
-	* provided data sectors - the number of sectors that this target
-	  provides (i.e. the size of the device minus the size of all
-	  metadata and padding). The user of this target should not send
-	  bios that access data beyond the "provided data sectors" limit.
-	* flags - a flag is set if journal_mac is used
-* journal
-	The journal is divided into sections, each section contains:
-	* metadata area (4kiB), it contains journal entries
-	  every journal entry contains:
-		* logical sector (specifies where the data and tag should
-		  be written)
-		* last 8 bytes of data
-		* integrity tag (the size is specified in the superblock)
-	    every metadata sector ends with
-		* mac (8-bytes), all the macs in 8 metadata sectors form a
-		  64-byte value. It is used to store hmac of sector
-		  numbers in the journal section, to protect against a
-		  possibility that the attacker tampers with sector
-		  numbers in the journal.
-		* commit id
-	* data area (the size is variable; it depends on how many journal
-	  entries fit into the metadata area)
-	    every sector in the data area contains:
-		* data (504 bytes of data, the last 8 bytes are stored in
-		  the journal entry)
-		* commit id
-	To test if the whole journal section was written correctly, every
-	512-byte sector of the journal ends with 8-byte commit id. If the
-	commit id matches on all sectors in a journal section, then it is
-	assumed that the section was written correctly. If the commit id
-	doesn't match, the section was written partially and it should not
-	be replayed.
-* one or more runs of interleaved tags and data. Each run contains:
-	* tag area - it contains integrity tags. There is one tag for each
-	  sector in the data area
-	* data area - it contains data sectors. The number of data sectors
-	  in one run must be a power of two. log2 of this value is stored
-	  in the superblock.

doc/kernel/linear.txt

@@ -16,15 +16,15 @@ Example scripts
 [[
 #!/bin/sh
 # Create an identity mapping for a device
-echo "0 `blockdev --getsz $1` linear $1 0" | dmsetup create identity
+echo "0 `blockdev --getsize $1` linear $1 0" | dmsetup create identity
 ]]
 
 
 [[
 #!/bin/sh
 # Join 2 devices together
-size1=`blockdev --getsz $1`
-size2=`blockdev --getsz $2`
+size1=`blockdev --getsize $1`
+size2=`blockdev --getsize $2`
 echo "0 $size1 linear $1 0
 $size1 $size2 linear $2 0" | dmsetup create joined
 ]]
@@ -44,7 +44,7 @@ if (!defined($dev)) {
         die("Please specify a device.\n");
 }
 
-my $dev_size = `blockdev --getsz $dev`;
+my $dev_size = `blockdev --getsize $dev`;
 my $extents = int($dev_size / $extent_size) -
               (($dev_size % $extent_size) ? 1 : 0);
 

doc/kernel/log-writes.txt

@@ -14,14 +14,14 @@ Log Ordering
 
 We log things in order of completion once we are sure the write is no longer in
 cache.  This means that normal WRITE requests are not actually logged until the
-next REQ_PREFLUSH request.  This is to make it easier for userspace to replay
-the log in a way that correlates to what is on disk and not what is in cache,
-to make it easier to detect improper waiting/flushing.
+next REQ_FLUSH request.  This is to make it easier for userspace to replay the
+log in a way that correlates to what is on disk and not what is in cache, to
+make it easier to detect improper waiting/flushing.
 
 This works by attaching all WRITE requests to a list once the write completes.
-Once we see a REQ_PREFLUSH request we splice this list onto the request and once
+Once we see a REQ_FLUSH request we splice this list onto the request and once
 the FLUSH request completes we log all of the WRITEs and then the FLUSH.  Only
-completed WRITEs, at the time the REQ_PREFLUSH is issued, are added in order to
+completed WRITEs, at the time the REQ_FLUSH is issued, are added in order to
 simulate the worst case scenario with regard to power failures.  Consider the
 following example (W means write, C means complete):
 

doc/kernel/raid.txt

@@ -14,12 +14,8 @@ The target is named "raid" and it accepts the following parameters:
     <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>]
 
 <raid_type>:
-  raid0		RAID0 striping (no resilience)
   raid1		RAID1 mirroring
-  raid4		RAID4 with dedicated last parity disk
-  raid5_n 	RAID5 with dedicated last parity disk supporting takeover
-		Same as raid4
-		-Transitory layout
+  raid4		RAID4 dedicated parity disk
   raid5_la	RAID5 left asymmetric
 		- rotating parity 0 with data continuation
   raid5_ra	RAID5 right asymmetric
@@ -34,19 +30,7 @@ The target is named "raid" and it accepts the following parameters:
 		- rotating parity N (right-to-left) with data restart
   raid6_nc	RAID6 N continue
 		- rotating parity N (right-to-left) with data continuation
-  raid6_n_6	RAID6 with dedicate parity disks
-		- parity and Q-syndrome on the last 2 disks;
-		  layout for takeover from/to raid4/raid5_n
-  raid6_la_6	Same as "raid_la" plus dedicated last Q-syndrome disk
-		- layout for takeover from raid5_la from/to raid6
-  raid6_ra_6	Same as "raid5_ra" dedicated last Q-syndrome disk
-		- layout for takeover from raid5_ra from/to raid6
-  raid6_ls_6	Same as "raid5_ls" dedicated last Q-syndrome disk
-		- layout for takeover from raid5_ls from/to raid6
-  raid6_rs_6	Same as "raid5_rs" dedicated last Q-syndrome disk
-		- layout for takeover from raid5_rs from/to raid6
   raid10        Various RAID10 inspired algorithms chosen by additional params
-		(see raid10_format and raid10_copies below)
 		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
 		- RAID1E: Integrated Adjacent Stripe Mirroring
 		- RAID1E: Integrated Offset Stripe Mirroring
@@ -132,57 +116,10 @@ The target is named "raid" and it accepts the following parameters:
 		Here we see layouts closely akin to 'RAID1E - Integrated
 		Offset Stripe Mirroring'.
 
-        [delta_disks <N>]
-		The delta_disks option value (-251 < N < +251) triggers
-		device removal (negative value) or device addition (positive
-		value) to any reshape supporting raid levels 4/5/6 and 10.
-		RAID levels 4/5/6 allow for addition of devices (metadata
-		and data device tuple), raid10_near and raid10_offset only
-		allow for device addition. raid10_far does not support any
-		reshaping at all.
-		A minimum of devices have to be kept to enforce resilience,
-		which is 3 devices for raid4/5 and 4 devices for raid6.
-
-        [data_offset <sectors>]
-		This option value defines the offset into each data device
-		where the data starts. This is used to provide out-of-place
-		reshaping space to avoid writing over data whilst
-		changing the layout of stripes, hence an interruption/crash
-		may happen at any time without the risk of losing data.
-		E.g. when adding devices to an existing raid set during
-		forward reshaping, the out-of-place space will be allocated
-		at the beginning of each raid device. The kernel raid4/5/6/10
-		MD personalities supporting such device addition will read the data from
-		the existing first stripes (those with smaller number of stripes)
-		starting at data_offset to fill up a new stripe with the larger
-		number of stripes, calculate the redundancy blocks (CRC/Q-syndrome)
-		and write that new stripe to offset 0. Same will be applied to all
-		N-1 other new stripes. This out-of-place scheme is used to change
-		the RAID type (i.e. the allocation algorithm) as well, e.g.
-		changing from raid5_ls to raid5_n.
-
-	[journal_dev <dev>]
-		This option adds a journal device to raid4/5/6 raid sets and
-		uses it to close the 'write hole' caused by the non-atomic updates
-		to the component devices which can cause data loss during recovery.
-		The journal device is used as writethrough thus causing writes to
-		be throttled versus non-journaled raid4/5/6 sets.
-		Takeover/reshape is not possible with a raid4/5/6 journal device;
-		it has to be deconfigured before requesting these.
-
-	[journal_mode <mode>]
-		This option sets the caching mode on journaled raid4/5/6 raid sets
-		(see 'journal_dev <dev>' above) to 'writethrough' or 'writeback'.
-		If 'writeback' is selected the journal device has to be resilient
-		and must not suffer from the 'write hole' problem itself (e.g. use
-		raid1 or raid10) to avoid a single point of failure.
-
 <#raid_devs>: The number of devices composing the array.
 	Each device consists of two entries.  The first is the device
 	containing the metadata (if any); the second is the one containing the
-	data. A Maximum of 64 metadata/data device entries are supported
-	up to target version 1.8.0.
-	1.9.0 supports up to 253 which is enforced by the used MD kernel runtime.
+	data.
 
 	If a drive has failed or is missing at creation time, a '-' can be
 	given for both the metadata and data drives for a given position.
@@ -258,14 +195,6 @@ recovery.  Here is a fuller description of the individual fields:
 			in RAID1/10 or wrong parity values found in RAID4/5/6.
 			This value is valid only after a "check" of the array
 			is performed.  A healthy array has a 'mismatch_cnt' of 0.
-	<data_offset>   The current data offset to the start of the user data on
-			each component device of a raid set (see the respective
-			raid parameter to support out-of-place reshaping).
-	<journal_char>	'A' - active write-through journal device.
-			'a' - active write-back journal device.
-			'D' - dead journal device.
-			'-' - no journal device.
-
 
 Message Interface
 -----------------
@@ -278,6 +207,7 @@ include:
 	"recover"- Initiate/continue a recover process.
 	"check"  - Initiate a check (i.e. a "scrub") of the array.
 	"repair" - Initiate a repair of the array.
+	"reshape"- Currently unsupported (-EINVAL).
 
 
 Discard Support
@@ -327,19 +257,3 @@ Version History
 1.5.2   'mismatch_cnt' is zero unless [last_]sync_action is "check".
 1.6.0   Add discard support (and devices_handle_discard_safely module param).
 1.7.0   Add support for MD RAID0 mappings.
-1.8.0   Explicitly check for compatible flags in the superblock metadata
-	and reject to start the raid set if any are set by a newer
-	target version, thus avoiding data corruption on a raid set
-	with a reshape in progress.
-1.9.0   Add support for RAID level takeover/reshape/region size
-	and set size reduction.
-1.9.1   Fix activation of existing RAID 4/10 mapped devices
-1.9.2   Don't emit '- -' on the status table line in case the constructor
-	fails reading a superblock. Correctly emit 'maj:min1 maj:min2' and
-	'D' on the status line.  If '- -' is passed into the constructor, emit
-	'- -' on the table line and '-' as the status line health character.
-1.10.0  Add support for raid4/5/6 journal device
-1.10.1  Fix data corruption on reshape request
-1.11.0  Fix table line argument order
-	(wrong raid10_copies/raid10_format sequence)
-1.11.1  Add raid4/5/6 journal write-back support via journal_mode option

doc/kernel/striped.txt

@@ -37,9 +37,9 @@ if (!$num_devs) {
         die("Specify at least one device\n");
 }
 
-$min_dev_size = `blockdev --getsz $devs[0]`;
+$min_dev_size = `blockdev --getsize $devs[0]`;
 for ($i = 1; $i < $num_devs; $i++) {
-        my $this_size = `blockdev --getsz $devs[$i]`;
+        my $this_size = `blockdev --getsize $devs[$i]`;
         $min_dev_size = ($min_dev_size < $this_size) ?
                         $min_dev_size : $this_size;
 }

doc/kernel/switch.txt

@@ -123,7 +123,7 @@ Assume that you have volumes vg1/switch0 vg1/switch1 vg1/switch2 with
 the same size.
 
 Create a switch device with 64kB region size:
-    dmsetup create switch --table "0 `blockdev --getsz /dev/vg1/switch0`
+    dmsetup create switch --table "0 `blockdev --getsize /dev/vg1/switch0`
 	switch 3 128 0 /dev/vg1/switch0 0 /dev/vg1/switch1 0 /dev/vg1/switch2 0"
 
 Set mappings for the first 7 entries to point to devices switch0, switch1,

doc/kernel/zoned.txt

@@ -1,144 +0,0 @@
-dm-zoned
-========
-
-The dm-zoned device mapper target exposes a zoned block device (ZBC and
-ZAC compliant devices) as a regular block device without any write
-pattern constraints. In effect, it implements a drive-managed zoned
-block device which hides from the user (a file system or an application
-doing raw block device accesses) the sequential write constraints of
-host-managed zoned block devices and can mitigate the potential
-device-side performance degradation due to excessive random writes on
-host-aware zoned block devices.
-
-For a more detailed description of the zoned block device models and
-their constraints see (for SCSI devices):
-
-http://www.t10.org/drafts.htm#ZBC_Family
-
-and (for ATA devices):
-
-http://www.t13.org/Documents/UploadedDocuments/docs2015/di537r05-Zoned_Device_ATA_Command_Set_ZAC.pdf
-
-The dm-zoned implementation is simple and minimizes system overhead (CPU
-and memory usage as well as storage capacity loss). For a 10TB
-host-managed disk with 256 MB zones, dm-zoned memory usage per disk
-instance is at most 4.5 MB and as little as 5 zones will be used
-internally for storing metadata and performaing reclaim operations.
-
-dm-zoned target devices are formatted and checked using the dmzadm
-utility available at:
-
-https://github.com/hgst/dm-zoned-tools
-
-Algorithm
-=========
-
-dm-zoned implements an on-disk buffering scheme to handle non-sequential
-write accesses to the sequential zones of a zoned block device.
-Conventional zones are used for caching as well as for storing internal
-metadata.
-
-The zones of the device are separated into 2 types:
-
-1) Metadata zones: these are conventional zones used to store metadata.
-Metadata zones are not reported as useable capacity to the user.
-
-2) Data zones: all remaining zones, the vast majority of which will be
-sequential zones used exclusively to store user data. The conventional
-zones of the device may be used also for buffering user random writes.
-Data in these zones may be directly mapped to the conventional zone, but
-later moved to a sequential zone so that the conventional zone can be
-reused for buffering incoming random writes.
-
-dm-zoned exposes a logical device with a sector size of 4096 bytes,
-irrespective of the physical sector size of the backend zoned block
-device being used. This allows reducing the amount of metadata needed to
-manage valid blocks (blocks written).
-
-The on-disk metadata format is as follows:
-
-1) The first block of the first conventional zone found contains the
-super block which describes the on disk amount and position of metadata
-blocks.
-
-2) Following the super block, a set of blocks is used to describe the
-mapping of the logical device blocks. The mapping is done per chunk of
-blocks, with the chunk size equal to the zoned block device size. The
-mapping table is indexed by chunk number and each mapping entry
-indicates the zone number of the device storing the chunk of data. Each
-mapping entry may also indicate if the zone number of a conventional
-zone used to buffer random modification to the data zone.
-
-3) A set of blocks used to store bitmaps indicating the validity of
-blocks in the data zones follows the mapping table. A valid block is
-defined as a block that was written and not discarded. For a buffered
-data chunk, a block is always valid only in the data zone mapping the
-chunk or in the buffer zone of the chunk.
-
-For a logical chunk mapped to a conventional zone, all write operations
-are processed by directly writing to the zone. If the mapping zone is a
-sequential zone, the write operation is processed directly only if the
-write offset within the logical chunk is equal to the write pointer
-offset within of the sequential data zone (i.e. the write operation is
-aligned on the zone write pointer). Otherwise, write operations are
-processed indirectly using a buffer zone. In that case, an unused
-conventional zone is allocated and assigned to the chunk being
-accessed. Writing a block to the buffer zone of a chunk will
-automatically invalidate the same block in the sequential zone mapping
-the chunk. If all blocks of the sequential zone become invalid, the zone
-is freed and the chunk buffer zone becomes the primary zone mapping the
-chunk, resulting in native random write performance similar to a regular
-block device.
-
-Read operations are processed according to the block validity
-information provided by the bitmaps. Valid blocks are read either from
-the sequential zone mapping a chunk, or if the chunk is buffered, from
-the buffer zone assigned. If the accessed chunk has no mapping, or the
-accessed blocks are invalid, the read buffer is zeroed and the read
-operation terminated.
-
-After some time, the limited number of convnetional zones available may
-be exhausted (all used to map chunks or buffer sequential zones) and
-unaligned writes to unbuffered chunks become impossible. To avoid this
-situation, a reclaim process regularly scans used conventional zones and
-tries to reclaim the least recently used zones by copying the valid
-blocks of the buffer zone to a free sequential zone. Once the copy
-completes, the chunk mapping is updated to point to the sequential zone
-and the buffer zone freed for reuse.
-
-Metadata Protection
-===================
-
-To protect metadata against corruption in case of sudden power loss or
-system crash, 2 sets of metadata zones are used. One set, the primary
-set, is used as the main metadata region, while the secondary set is
-used as a staging area. Modified metadata is first written to the
-secondary set and validated by updating the super block in the secondary
-set, a generation counter is used to indicate that this set contains the
-newest metadata. Once this operation completes, in place of metadata
-block updates can be done in the primary metadata set. This ensures that
-one of the set is always consistent (all modifications committed or none
-at all). Flush operations are used as a commit point. Upon reception of
-a flush request, metadata modification activity is temporarily blocked
-(for both incoming BIO processing and reclaim process) and all dirty
-metadata blocks are staged and updated. Normal operation is then
-resumed. Flushing metadata thus only temporarily delays write and
-discard requests. Read requests can be processed concurrently while
-metadata flush is being executed.
-
-Usage
-=====
-
-A zoned block device must first be formatted using the dmzadm tool. This
-will analyze the device zone configuration, determine where to place the
-metadata sets on the device and initialize the metadata sets.
-
-Ex:
-
-dmzadm --format /dev/sdxx
-
-For a formatted device, the target can be created normally with the
-dmsetup utility. The only parameter that dm-zoned requires is the
-underlying zoned block device name. Ex:
-
-echo "0 `blockdev --getsize ${dev}` zoned ${dev}" | dmsetup create dmz-`basename ${dev}`

include/configure.h.in

@@ -127,9 +127,6 @@
 /* Path to dmeventd pidfile. */
 #undef DMEVENTD_PIDFILE
 
-/* Define to 1 to enable the device-mapper filemap daemon. */
-#undef DMFILEMAPD
-
 /* Define to enable compat protocol */
 #undef DM_COMPAT
 
@@ -148,9 +145,6 @@
 /* Library version */
 #undef DM_LIB_VERSION
 
-/* Path to fsadm binary. */
-#undef FSADM_PATH
-
 /* Define to 1 if you have the `alarm' function. */
 #undef HAVE_ALARM
 
@@ -347,9 +341,6 @@
 /* Define to 1 if the system has the type `ptrdiff_t'. */
 #undef HAVE_PTRDIFF_T
 
-/* Define to 1 if the compiler has the `__builtin_clz` builtin. */
-#undef HAVE___BUILTIN_CLZ
-
 /* Define to 1 if you have the <readline/history.h> header file. */
 #undef HAVE_READLINE_HISTORY_H
 
@@ -494,9 +485,6 @@
 /* Define to 1 if you have the <sys/file.h> header file. */
 #undef HAVE_SYS_FILE_H
 
-/* Define to 1 if you have the <sys/inotify.h> header file. */
-#undef HAVE_SYS_INOTIFY_H
-
 /* Define to 1 if you have the <sys/ioctl.h> header file. */
 #undef HAVE_SYS_IOCTL_H
 
@@ -632,9 +620,6 @@
 /* Define to 1 to include code that uses lvmpolld. */
 #undef LVMPOLLD_SUPPORT
 
-/* configure command line used */
-#undef LVM_CONFIGURE_LINE
-
 /* Path to lvm binary. */
 #undef LVM_PATH
 

lib/Makefile.in

@@ -48,10 +48,6 @@ ifeq ("@CACHE@", "shared")
   SUBDIRS += cache_segtype
 endif
 
-ifeq ("@CLUSTER@", "shared")
-  SUBDIRS += locking
-endif
-
 SOURCES =\
 	activate/activate.c \
 	cache/lvmcache.c \
@@ -153,6 +149,10 @@ ifeq ("@CLUSTER@", "internal")
   SOURCES += locking/cluster_locking.c
 endif
 
+ifeq ("@CLUSTER@", "shared")
+  SUBDIRS += locking
+endif
+
 ifeq ("@SNAPSHOTS@", "internal")
   SOURCES += snapshot/snapshot.c
 endif
@@ -204,6 +204,11 @@ ifeq ("@BUILD_LVMLOCKD@", "yes")
 	locking/lvmlockd.c
 endif
 
+ifeq ("@DMEVENTD@", "yes")
+  CLDFLAGS += -L$(top_builddir)/daemons/dmeventd
+  LIBS += -ldevmapper-event
+endif
+
 LIB_NAME = liblvm-internal
 LIB_STATIC = $(LIB_NAME).a
 
@@ -224,10 +229,10 @@ endif
 CFLOW_LIST = $(SOURCES)
 CFLOW_LIST_TARGET = $(LIB_NAME).cflow
 
-PROGS_CFLAGS = $(BLKID_CFLAGS) $(UDEV_CFLAGS)
-
 include $(top_builddir)/make.tmpl
 
+CFLAGS += $(BLKID_CFLAGS) $(UDEV_CFLAGS) $(VALGRIND_CFLAGS)
+
 $(SUBDIRS): $(LIB_STATIC)
 
 CLEAN_TARGETS += misc/configure.h misc/lvm-version.h

lib/activate/activate.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2017 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2016 Red Hat, Inc. All rights reserved.
  *
  * This file is part of LVM2.
  *
@@ -150,15 +150,15 @@ static int _lv_passes_volumes_filter(struct cmd_context *cmd, const struct logic
 				    || str_list_match_list(&cmd->tags,
 							   &lv->vg->tags, NULL))
 					    return 1;
-
-				continue;
+				else
+					continue;
 			}
 			/* If supplied tag matches LV or VG tag, activate */
 			if (str_list_match_item(&lv->tags, str) ||
 			    str_list_match_item(&lv->vg->tags, str))
 				return 1;
-
-			continue;
+			else
+				continue;
 		}
 
 		/* If supplied name is vgname[/lvname] */
@@ -272,18 +272,10 @@ int lv_raid_percent(const struct logical_volume *lv, dm_percent_t *percent)
 {
 	return 0;
 }
-int lv_raid_data_offset(const struct logical_volume *lv, uint64_t *data_offset)
-{
-	return 0;
-}
 int lv_raid_dev_health(const struct logical_volume *lv, char **dev_health)
 {
 	return 0;
 }
-int lv_raid_dev_count(const struct logical_volume *lv, uint32_t *dev_cnt)
-{
-	return 0;
-}
 int lv_raid_mismatch_count(const struct logical_volume *lv, uint64_t *cnt)
 {
 	return 0;
@@ -366,10 +358,6 @@ int lv_mknodes(struct cmd_context *cmd, const struct logical_volume *lv)
 {
 	return 1;
 }
-int lv_deactivate_any_missing_subdevs(const struct logical_volume *lv)
-{
-	return 1;
-}
 int pv_uses_vg(struct physical_volume *pv,
 	       struct volume_group *vg)
 {
@@ -667,10 +655,6 @@ int target_present(struct cmd_context *cmd, const char *target_name,
 				      &maj, &min, &patchlevel);
 }
 
-/*
- * When '*info' is NULL, returns 1 only when LV is active.
- * When '*info' != NULL, returns 1 when info structure is populated.
- */
 static int _lv_info(struct cmd_context *cmd, const struct logical_volume *lv,
 		    int use_layer, struct lvinfo *info,
 		    const struct lv_segment *seg,
@@ -704,6 +688,32 @@ static int _lv_info(struct cmd_context *cmd, const struct logical_volume *lv,
 	if (seg_status) {
 		/* TODO: for now it's mess with seg_status */
 		seg_status->seg = seg;
+		if (lv_is_merging_cow(lv)) {
+			if (lv_has_target_type(cmd->mem, origin_from_cow(lv), NULL, TARGET_NAME_SNAPSHOT_MERGE)) {
+				/*
+				 * When the snapshot-merge has not yet started, query COW LVs as is.
+				 * When merge is in progress, query merging origin LV instead.
+				 * COW volume is already mapped as error target in this case.
+				 */
+				lv = origin_from_cow(lv);
+				seg_status->seg = first_seg(lv);
+				log_debug_activation("Snapshot merge is in progress, querying status of %s instead.",
+						     display_lvname(lv));
+			}
+		} else if (!use_layer && lv_is_origin(lv) && !lv_is_external_origin(lv)) {
+			/*
+			 * Query status for 'layered' (-real) device most of the time,
+			 * only when snapshot merge started, query its progress.
+			 * TODO: single LV may need couple status to be exposed at once....
+			 *       but this needs more logical background
+			 */
+			if (!lv_is_merging_origin(lv) ||
+			    !lv_has_target_type(cmd->mem, origin_from_cow(lv), NULL, TARGET_NAME_SNAPSHOT_MERGE))
+				use_layer = 1;
+		} else if (lv_is_cow(lv)) {
+			/* Hadle fictional lvm2 snapshot and query snapshotX volume */
+			seg_status->seg = find_snapshot(lv);
+		}
 	}
 
 	if (!dev_manager_info(cmd, lv,
@@ -757,102 +767,44 @@ int lv_info_by_lvid(struct cmd_context *cmd, const char *lvid_s, int use_layer,
 }
 
 /*
- * Returns 1 if lv_with_info_and_seg_status info structure populated,
+ * Returns 1 if lv_seg_status structure populated,
  * else 0 on failure or if device not active locally.
- *
- * When seg_status parsing had troubles it will set type to SEG_STATUS_UNKNOWN.
- *
- * Using usually one ioctl to obtain info and status.
- * More complex segment do collect info from one device,
- * but status from another device.
- *
- * TODO: further improve with more statuses (i.e. snapshot's origin/merge)
  */
-int lv_info_with_seg_status(struct cmd_context *cmd,
-			    const struct lv_segment *lv_seg,
-			    struct lv_with_info_and_seg_status *status,
-			    int with_open_count, int with_read_ahead)
+int lv_status(struct cmd_context *cmd, const struct lv_segment *lv_seg,
+	      int use_layer, struct lv_seg_status *lv_seg_status)
 {
-	const struct logical_volume *olv, *lv = status->lv = lv_seg->lv;
-
 	if (!activation())
 		return 0;
 
-	if (lv_is_used_cache_pool(lv)) {
-		/* INFO is not set as cache-pool cannot be active.
-		 * STATUS is collected from cache LV */
-		if (!(lv_seg = get_only_segment_using_this_lv(lv)))
-			return_0;
-		(void) _lv_info(cmd, lv_seg->lv, 1, NULL, lv_seg, &status->seg_status, 0, 0);
-		return 1;
-	}
+	return _lv_info(cmd, lv_seg->lv, use_layer, NULL, lv_seg, lv_seg_status, 0, 0);
+}
 
-	if (lv_is_thin_pool(lv)) {
-		/* Always collect status for '-tpool' */
-		if (_lv_info(cmd, lv, 1, &status->info, lv_seg, &status->seg_status, 0, 0) &&
-		    (status->seg_status.type == SEG_STATUS_THIN_POOL)) {
-			/* There is -tpool device, but query 'active' state of 'fake' thin-pool */
-			if (!_lv_info(cmd, lv, 0, NULL, NULL, NULL, 0, 0) &&
-			    !status->seg_status.thin_pool->needs_check)
-				status->info.exists = 0; /* So pool LV is not active */
-		}
-		return 1;
-	}
+/*
+ * Returns 1 if lv_with_info_and_seg_status structure populated,
+ * else 0 on failure or if device not active locally.
+ *
+ * This is the same as calling lv_info and lv_status,
+ * but* it's done in one go with one ioctl if possible!                                                             ]
+ */
+int lv_info_with_seg_status(struct cmd_context *cmd, const struct logical_volume *lv,
+			    const struct lv_segment *lv_seg, int use_layer,
+			    struct lv_with_info_and_seg_status *status,
+			    int with_open_count, int with_read_ahead)
+{
+	if (!activation())
+		return 0;
 
-	if (lv_is_external_origin(lv)) {
-		if (!_lv_info(cmd, lv, 0, &status->info, NULL, NULL,
-			      with_open_count, with_read_ahead))
-			return_0;
+	if (lv == lv_seg->lv)
+		return _lv_info(cmd, lv, use_layer, &status->info, lv_seg, &status->seg_status,
+				with_open_count, with_read_ahead);
 
-		(void) _lv_info(cmd, lv, 1, NULL, lv_seg, &status->seg_status, 0, 0);
-		return 1;
-	}
-
-	if (lv_is_origin(lv)) {
-		/* Query segment status for 'layered' (-real) device most of the time,
-		 * only for merging snapshot, query its progress.
-		 * TODO: single LV may need couple status to be exposed at once....
-		 *       but this needs more logical background
-		 */
-		/* Show INFO for actual origin and grab status for merging origin */
-		if (!_lv_info(cmd, lv, 0, &status->info, lv_seg,
-			      lv_is_merging_origin(lv) ? &status->seg_status : NULL,
-			      with_open_count, with_read_ahead))
-			return_0;
-
-		if (status->info.exists &&
-		    (status->seg_status.type != SEG_STATUS_SNAPSHOT)) /* Not merging */
-			/* Grab STATUS from layered -real */
-			(void) _lv_info(cmd, lv, 1, NULL, lv_seg, &status->seg_status, 0, 0);
-		return 1;
-	}
-
-	if (lv_is_cow(lv)) {
-		if (lv_is_merging_cow(lv)) {
-			olv = origin_from_cow(lv);
-
-			if (!_lv_info(cmd, olv, 0, &status->info, first_seg(olv), &status->seg_status,
-				      with_open_count, with_read_ahead))
-				return_0;
-
-			if (status->seg_status.type == SEG_STATUS_SNAPSHOT) {
-				log_debug_activation("Snapshot merge is in progress, querying status of %s instead.",
-						     display_lvname(lv));
-				/*
-				 * When merge is in progress, query merging origin LV instead.
-				 * COW volume is already mapped as error target in this case.
-				 */
-				return 1;
-			}
-
-			/* Merge not yet started, still a snapshot... */
-		}
-		/* Hadle fictional lvm2 snapshot and query snapshotX volume */
-		lv_seg = find_snapshot(lv);
-	}
-
-	return _lv_info(cmd, lv, 0, &status->info, lv_seg, &status->seg_status,
-			with_open_count, with_read_ahead);
+	/*
+	 * If the info is requested for an LV and segment
+	 * status for segment that belong to another LV,
+	 * we need to acquire info and status separately!
+	 */
+	return _lv_info(cmd, lv, use_layer, &status->info, NULL, NULL, with_open_count, with_read_ahead) &&
+	       _lv_info(cmd, lv_seg->lv, use_layer, NULL, lv_seg, &status->seg_status, 0, 0);
 }
 
 #define OPEN_COUNT_CHECK_RETRIES 25
@@ -998,30 +950,6 @@ int lv_raid_percent(const struct logical_volume *lv, dm_percent_t *percent)
 	return lv_mirror_percent(lv->vg->cmd, lv, 0, percent, NULL);
 }
 
-int lv_raid_data_offset(const struct logical_volume *lv, uint64_t *data_offset)
-{
-	int r;
-	struct dev_manager *dm;
-	struct dm_status_raid *status;
-
-	if (!lv_info(lv->vg->cmd, lv, 0, NULL, 0, 0))
-		return 0;
-
-	log_debug_activation("Checking raid data offset and dev sectors for LV %s/%s",
-			     lv->vg->name, lv->name);
-	if (!(dm = dev_manager_create(lv->vg->cmd, lv->vg->name, 1)))
-		return_0;
-
-	if (!(r = dev_manager_raid_status(dm, lv, &status)))
-		stack;
-
-	*data_offset = status->data_offset;
-
-	dev_manager_destroy(dm);
-
-	return r;
-}
-
 int lv_raid_dev_health(const struct logical_volume *lv, char **dev_health)
 {
 	int r;
@@ -1051,32 +979,6 @@ int lv_raid_dev_health(const struct logical_volume *lv, char **dev_health)
 	return r;
 }
 
-int lv_raid_dev_count(const struct logical_volume *lv, uint32_t *dev_cnt)
-{
-	struct dev_manager *dm;
-	struct dm_status_raid *status;
-
-	*dev_cnt = 0;
-
-	if (!lv_info(lv->vg->cmd, lv, 0, NULL, 0, 0))
-		return 0;
-
-	log_debug_activation("Checking raid device count for LV %s/%s",
-			     lv->vg->name, lv->name);
-	if (!(dm = dev_manager_create(lv->vg->cmd, lv->vg->name, 1)))
-		return_0;
-
-	if (!dev_manager_raid_status(dm, lv, &status)) {
-		dev_manager_destroy(dm);
-		return_0;
-	}
-	*dev_cnt = status->dev_count;
-
-	dev_manager_destroy(dm);
-
-	return 1;
-}
-
 int lv_raid_mismatch_count(const struct logical_volume *lv, uint64_t *cnt)
 {
 	struct dev_manager *dm;
@@ -1239,7 +1141,7 @@ int lv_cache_status(const struct logical_volume *cache_lv,
 		return 0;
 	}
 
-	if (!lv_info(cache_lv->vg->cmd, cache_lv, 1, NULL, 0, 0)) {
+	if (!lv_info(cache_lv->vg->cmd, cache_lv, 0, NULL, 0, 0)) {
 		log_error("Cannot check status for locally inactive cache volume %s.",
 			  display_lvname(cache_lv));
 		return 0;
@@ -1855,15 +1757,12 @@ int monitor_dev_for_events(struct cmd_context *cmd, const struct logical_volume
 	 *  However in case command would have crashed, such LV is
 	 *  left unmonitored and may potentially require dmeventd.
 	 */
-	if (lv_is_cache_pool_data(lv) || lv_is_cache_pool_metadata(lv)) {
-		if (!(seg = find_pool_seg(first_seg(lv))))
-			return_0;
-		if (!lv_is_used_cache_pool(seg->lv)) {
-			log_debug_activation("Skipping %smonitor of %s.%s",
-					     (monitor) ? "" : "un", display_lvname(lv),
-					     (monitor) ? " Cache pool activation for clearing only." : "");
-			return 1;
-		}
+	if ((lv_is_cache_pool_data(lv) || lv_is_cache_pool_metadata(lv)) &&
+	    !lv_is_used_cache_pool((find_pool_seg(first_seg(lv))->lv))) {
+		log_debug_activation("Skipping %smonitor of %s.%s",
+				     (monitor) ? "" : "un", display_lvname(lv),
+				     (monitor) ? " Cache pool activation for clearing only." : "");
+		return 1;
 	}
 
 	/*
@@ -2007,7 +1906,7 @@ int monitor_dev_for_events(struct cmd_context *cmd, const struct logical_volume
 			/* FIXME specify events */
 			if (!monitor_fn(seg, 0)) {
 				log_error("%s: %s segment monitoring function failed.",
-					  display_lvname(lv), lvseg_name(seg));
+					  display_lvname(lv), seg->segtype->name);
 				return 0;
 			}
 		} else
@@ -2015,13 +1914,16 @@ int monitor_dev_for_events(struct cmd_context *cmd, const struct logical_volume
 
 		/* Check [un]monitor results */
 		/* Try a couple times if pending, but not forever... */
-		for (i = 0;; i++) {
+		for (i = 0; i < 40; i++) {
 			pending = 0;
 			monitored = seg->segtype->ops->target_monitored(seg, &pending);
-			if (!pending || i >= 40)
+			if (pending ||
+			    (!monitored && monitor) ||
+			    (monitored && !monitor))
+				log_very_verbose("%s %smonitoring still pending: waiting...",
+						 display_lvname(lv), monitor ? "" : "un");
+			else
 				break;
-			log_very_verbose("%s %smonitoring still pending: waiting...",
-					 display_lvname(lv), monitor ? "" : "un");
 			usleep(10000 * i);
 		}
 
@@ -2641,77 +2543,6 @@ int lv_mknodes(struct cmd_context *cmd, const struct logical_volume *lv)
 	return r;
 }
 
-/* Remove any existing, closed mapped device by @name */
-static int _remove_dm_dev_by_name(const char *name)
-{
-	int r = 0;
-	struct dm_task *dmt;
-	struct dm_info info;
-
-	if (!(dmt = dm_task_create(DM_DEVICE_INFO)))
-		return_0;
-
-	/* Check, if the device exists. */
-	if (dm_task_set_name(dmt, name) && dm_task_run(dmt) && dm_task_get_info(dmt, &info)) {
-		dm_task_destroy(dmt);
-
-		/* Ignore non-existing or open dm devices */
-		if (!info.exists || info.open_count)
-			return 1;
-
-		if (!(dmt = dm_task_create(DM_DEVICE_REMOVE)))
-			return_0;
-
-		if (dm_task_set_name(dmt, name))
-			r = dm_task_run(dmt);
-	}
-
-	dm_task_destroy(dmt);
-
-	return r;
-}
-
-/* Work all segments of @lv removing any existing, closed "*-missing_N_0" sub devices. */
-static int _lv_remove_any_missing_subdevs(struct logical_volume *lv)
-{
-	if (lv) {
-		uint32_t seg_no = 0;
-		char name[257];
-		struct lv_segment *seg;
-
-		dm_list_iterate_items(seg, &lv->segments) {
-			if (seg->area_count != 1)
-				return_0;
-			if (dm_snprintf(name, sizeof(name), "%s-%s-missing_%u_0", seg->lv->vg->name, seg->lv->name, seg_no) < 0)
-				return 0;
-			if (!_remove_dm_dev_by_name(name))
-				return 0;
-
-			seg_no++;
-		}
-	}
-
-	return 1;
-}
-
-/* Remove any "*-missing_*" sub devices added by the activation layer for an rmate/rimage missing PV mapping */
-int lv_deactivate_any_missing_subdevs(const struct logical_volume *lv)
-{
-	uint32_t s;
-	struct lv_segment *seg = first_seg(lv);
-
-	for (s = 0; s < seg->area_count; s++) {
-		if (seg_type(seg, s) == AREA_LV &&
-		    !_lv_remove_any_missing_subdevs(seg_lv(seg, s)))
-			return 0;
-		if (seg->meta_areas && seg_metatype(seg, s) == AREA_LV &&
-		    !_lv_remove_any_missing_subdevs(seg_metalv(seg, s)))
-			return 0;
-	}
-
-	return 1;
-}
-
 /*
  * Does PV use VG somewhere in its construction?
  * Returns 1 on failure.

lib/activate/activate.h

@@ -54,12 +54,11 @@ struct lv_seg_status {
 };
 
 struct lv_with_info_and_seg_status {
+	const struct logical_volume *lv;	/* input */
 	int info_ok;
-	const struct logical_volume *lv;        /* output */
 	struct lvinfo info;			/* output */
 	int seg_part_of_lv;			/* output */
-	struct lv_seg_status seg_status;	/* output, see lv_seg_status */
-	/* TODO: add extra status for snapshot origin */
+	struct lv_seg_status seg_status;	/* input/output, see lv_seg_status */
 };
 
 struct lv_activate_opts {
@@ -124,8 +123,6 @@ int lv_deactivate(struct cmd_context *cmd, const char *lvid_s, const struct logi
 
 int lv_mknodes(struct cmd_context *cmd, const struct logical_volume *lv);
 
-int lv_deactivate_any_missing_subdevs(const struct logical_volume *lv);
-
 /*
  * Returns 1 if info structure has been populated, else 0 on failure.
  * When lvinfo* is NULL, it returns 1 if the device is locally active, 0 otherwise.
@@ -135,6 +132,13 @@ int lv_info(struct cmd_context *cmd, const struct logical_volume *lv, int use_la
 int lv_info_by_lvid(struct cmd_context *cmd, const char *lvid_s, int use_layer,
 		    struct lvinfo *info, int with_open_count, int with_read_ahead);
 
+/*
+ * Returns 1 if lv_seg_status structure has been populated,
+ * else 0 on failure or if device not active locally.
+ */
+int lv_status(struct cmd_context *cmd, const struct lv_segment *lv_seg,
+	      int use_layer, struct lv_seg_status *lv_seg_status);
+
 /*
  * Returns 1 if lv_info_and_seg_status structure has been populated,
  * else 0 on failure or if device not active locally.
@@ -142,8 +146,8 @@ int lv_info_by_lvid(struct cmd_context *cmd, const char *lvid_s, int use_layer,
  * lv_info_with_seg_status is the same as calling lv_info and then lv_status,
  * but this fn tries to do that with one ioctl if possible.
  */
-int lv_info_with_seg_status(struct cmd_context *cmd,
-			    const struct lv_segment *lv_seg,
+int lv_info_with_seg_status(struct cmd_context *cmd, const struct logical_volume *lv,
+			    const struct lv_segment *lv_seg, int use_layer,
 			    struct lv_with_info_and_seg_status *status,
 			    int with_open_count, int with_read_ahead);
 
@@ -168,13 +172,11 @@ int lv_snapshot_percent(const struct logical_volume *lv, dm_percent_t *percent);
 int lv_mirror_percent(struct cmd_context *cmd, const struct logical_volume *lv,
 		      int wait, dm_percent_t *percent, uint32_t *event_nr);
 int lv_raid_percent(const struct logical_volume *lv, dm_percent_t *percent);
-int lv_raid_dev_count(const struct logical_volume *lv, uint32_t *dev_cnt);
-int lv_raid_data_offset(const struct logical_volume *lv, uint64_t *data_offset);
 int lv_raid_dev_health(const struct logical_volume *lv, char **dev_health);
 int lv_raid_mismatch_count(const struct logical_volume *lv, uint64_t *cnt);
 int lv_raid_sync_action(const struct logical_volume *lv, char **sync_action);
 int lv_raid_message(const struct logical_volume *lv, const char *msg);
-int lv_cache_status(const struct logical_volume *cache_lv,
+int lv_cache_status(const struct logical_volume *lv,
 		    struct lv_status_cache **status);
 int lv_thin_pool_percent(const struct logical_volume *lv, int metadata,
 			 dm_percent_t *percent);
@@ -202,12 +204,12 @@ int lv_has_target_type(struct dm_pool *mem, const struct logical_volume *lv,
 		       const char *layer, const char *target_type);
 
 int monitor_dev_for_events(struct cmd_context *cmd, const struct logical_volume *lv,
-			   const struct lv_activate_opts *laopts, int monitor);
+			   const struct lv_activate_opts *laopts, int do_reg);
 
 #ifdef DMEVENTD
 #  include "libdevmapper-event.h"
 char *get_monitor_dso_path(struct cmd_context *cmd, const char *libpath);
-int target_registered_with_dmeventd(struct cmd_context *cmd, const char *dso,
+int target_registered_with_dmeventd(struct cmd_context *cmd, const char *libpath,
 				    const struct logical_volume *lv, int *pending);
 int target_register_events(struct cmd_context *cmd, const char *dso, const struct logical_volume *lv,
 			    int evmask __attribute__((unused)), int set, int timeout);

lib/activate/fs.c

@@ -186,11 +186,11 @@ static int _mk_link(const char *dev_dir, const char *vg_name,
 			    !stat(lv_path, &buf)) {
 				if (buf_lp.st_rdev == buf.st_rdev)
 					return 1;
-
-				log_warn("Symlink %s that should have been "
-					 "created by udev does not have "
-					 "correct target. Falling back to "
-					 "direct link creation", lv_path);
+				else
+					log_warn("Symlink %s that should have been "
+						 "created by udev does not have "
+						 "correct target. Falling back to "
+						 "direct link creation", lv_path);
 			} else
 				log_warn("Symlink %s that should have been "
 					 "created by udev could not be checked "
@@ -239,9 +239,7 @@ static int _rm_link(const char *dev_dir, const char *vg_name,
 			return 1;
 		log_sys_error("lstat", lv_path);
 		return 0;
-	}
-
-	if (dm_udev_get_sync_support() && udev_checking() && check_udev)
+	} else if (dm_udev_get_sync_support() && udev_checking() && check_udev)
 		log_warn("The link %s should have been removed by udev "
 			 "but it is still present. Falling back to "
 			 "direct link removal.", lv_path);
@@ -480,9 +478,9 @@ int fs_rename_lv(const struct logical_volume *lv, const char *dev,
 			 _fs_op(FS_ADD, lv->vg->cmd->dev_dir, lv->vg->name,
 				lv->name, dev, "", lv->vg->cmd->current_settings.udev_rules));
 	}
-
-	return _fs_op(FS_RENAME, lv->vg->cmd->dev_dir, lv->vg->name, lv->name,
-		      dev, old_lvname, lv->vg->cmd->current_settings.udev_rules);
+	else 
+		return _fs_op(FS_RENAME, lv->vg->cmd->dev_dir, lv->vg->name, lv->name,
+			      dev, old_lvname, lv->vg->cmd->current_settings.udev_rules);
 }
 
 void fs_unlock(void)

lib/cache/lvmcache.c

@@ -1600,6 +1600,8 @@ void lvmcache_del(struct lvmcache_info *info)
 	info->label->labeller->ops->destroy_label(info->label->labeller,
 						  info->label);
 	dm_free(info);
+
+	return;
 }
 
 /*
@@ -1896,7 +1898,8 @@ static int _lvmcache_update_vgstatus(struct lvmcache_info *info, uint32_t vgstat
 						   info->vginfo->creation_host))
 		goto set_lock_type;
 
-	dm_free(info->vginfo->creation_host);
+	if (info->vginfo->creation_host)
+		dm_free(info->vginfo->creation_host);
 
 	if (!(info->vginfo->creation_host = dm_strdup(creation_host))) {
 		log_error("cache creation host alloc failed for %s.",
@@ -1915,7 +1918,8 @@ set_lock_type:
 	if (info->vginfo->lock_type && !strcmp(lock_type, info->vginfo->lock_type))
 		goto set_system_id;
 
-	dm_free(info->vginfo->lock_type);
+	if (info->vginfo->lock_type)
+		dm_free(info->vginfo->lock_type);
 
 	if (!(info->vginfo->lock_type = dm_strdup(lock_type))) {
 		log_error("cache lock_type alloc failed for %s", lock_type);
@@ -1933,7 +1937,8 @@ set_system_id:
 	if (info->vginfo->system_id && !strcmp(system_id, info->vginfo->system_id))
 		goto out;
 
-	dm_free(info->vginfo->system_id);
+	if (info->vginfo->system_id)
+		dm_free(info->vginfo->system_id);
 
 	if (!(info->vginfo->system_id = dm_strdup(system_id))) {
 		log_error("cache system_id alloc failed for %s", system_id);

lib/cache/lvmcache.h

@@ -181,7 +181,7 @@ int lvmcache_foreach_ba(struct lvmcache_info *info,
 			int (*fun)(struct disk_locn *, void *),
 			void *baton);
 
-int lvmcache_foreach_pv(struct lvmcache_vginfo *vginfo,
+int lvmcache_foreach_pv(struct lvmcache_vginfo *vg,
 			int (*fun)(struct lvmcache_info *, void *), void * baton);
 
 uint64_t lvmcache_device_size(struct lvmcache_info *info);

lib/cache/lvmetad.c

@@ -66,7 +66,7 @@ static int _log_debug_inequality(const char *name, struct dm_config_node *a, str
 					log_debug_lvmetad("VG %s metadata inequality at %s / %s: %s / %s",
 							  name, a->key, b->key, av->v.str, bv->v.str);
 				else if (a->v->type == DM_CFG_INT && b->v->type == DM_CFG_INT)
-					log_debug_lvmetad("VG %s metadata inequality at %s / %s: " FMTd64 " / " FMTd64,
+					log_debug_lvmetad("VG %s metadata inequality at %s / %s: " FMTi64 " / " FMTi64,
 							  name, a->key, b->key, av->v.i, bv->v.i);
 				else
 					log_debug_lvmetad("VG %s metadata inequality at %s / %s: type %d / type %d",
@@ -145,14 +145,13 @@ int lvmetad_connect(struct cmd_context *cmd)
 		_lvmetad_use = 1;
 		_lvmetad_cmd = cmd;
 		return 1;
+	} else {
+		log_debug_lvmetad("Failed to connect to lvmetad: %s", strerror(_lvmetad.error));
+		_lvmetad_connected = 0;
+		_lvmetad_use = 0;
+		_lvmetad_cmd = NULL;
+		return 0;
 	}
-
-	log_debug_lvmetad("Failed to connect to lvmetad: %s", strerror(_lvmetad.error));
-	_lvmetad_connected = 0;
-	_lvmetad_use = 0;
-	_lvmetad_cmd = NULL;
-
-	return 0;
 }
 
 int lvmetad_used(void)
@@ -663,7 +662,7 @@ static int _lvmetad_handle_reply(daemon_reply reply, const char *id, const char
 	}
 
 	if (reply.error) {
-		log_error("lvmetad cannot be used due to error: %s", strerror(reply.error));
+		log_warn("WARNING: lvmetad cannot be used due to error: %s", strerror(reply.error));
 		goto fail;
 	}
 
@@ -1305,7 +1304,7 @@ int lvmetad_vg_remove_pending(struct volume_group *vg)
 	reply = _lvmetad_send(vg->cmd, "set_vg_info",
 			      "name = %s", vg->name,
 			      "uuid = %s", uuid,
-			      "version = %"PRId64, (int64_t)0,
+			      "version = %d", 0,
 			      NULL);
 
 	if (!_lvmetad_handle_reply(reply, "set_vg_info", vg->name, NULL)) {
@@ -2875,9 +2874,6 @@ int lvmetad_is_disabled(struct cmd_context *cmd, const char **reason)
 		} else if (strstr(reply_reason, LVMETAD_DISABLE_REASON_DIRECT)) {
 			*reason = "the disable flag was set directly";
 
-		} else if (strstr(reply_reason, LVMETAD_DISABLE_REASON_REPAIR)) {
-			*reason = "a repair command was run";
-
 		} else if (strstr(reply_reason, LVMETAD_DISABLE_REASON_LVM1)) {
 			*reason = "LVM1 metadata was found";
 

lib/cache_segtype/cache.c

@@ -36,38 +36,6 @@ static unsigned _feature_mask;
         log_error(t " segment %s of logical volume %s.", ## p,	\
                   dm_config_parent_name(sn), seg->lv->name), 0;
 
-static int _cache_out_line(const char *line, void *_f)
-{
-	log_print("    Setting\t\t%s", line);
-
-	return 1;
-}
-
-static void _cache_display(const struct lv_segment *seg)
-{
-	const struct dm_config_node *n;
-	const struct lv_segment *pool_seg =
-		seg_is_cache_pool(seg) ? seg : first_seg(seg->pool_lv);
-
-	log_print("  Chunk size\t\t%s",
-		  display_size(seg->lv->vg->cmd, pool_seg->chunk_size));
-
-	if (pool_seg->cache_metadata_format != CACHE_METADATA_FORMAT_UNSELECTED)
-		log_print("  Metadata format\t%u", pool_seg->cache_metadata_format);
-
-	if (pool_seg->cache_mode != CACHE_MODE_UNSELECTED)
-		log_print("  Mode\t\t%s", get_cache_mode_name(pool_seg));
-
-	if (pool_seg->policy_name)
-		log_print("  Policy\t\t%s", pool_seg->policy_name);
-
-	if (pool_seg->policy_settings &&
-	    (n = pool_seg->policy_settings->child))
-		dm_config_write_node(n, _cache_out_line, NULL);
-
-	log_print(" ");
-}
-
 /*
  * When older metadata are loaded without newer settings,
  * set then to default settings (the one that could have been
@@ -84,13 +52,7 @@ static void _fix_missing_defaults(struct lv_segment *cpool_seg)
 			    cpool_seg->policy_name);
 	}
 
-	if (cpool_seg->cache_metadata_format == CACHE_METADATA_FORMAT_UNSELECTED) {
-		cpool_seg->cache_metadata_format = CACHE_METADATA_FORMAT_1;
-		log_verbose("Cache pool %s uses implicit metadata format %u.",
-			    display_lvname(cpool_seg->lv), cpool_seg->cache_metadata_format);
-	}
-
-	if (cpool_seg->cache_mode == CACHE_MODE_UNSELECTED) {
+	if (cpool_seg->cache_mode == CACHE_MODE_UNDEFINED) {
 		cpool_seg->cache_mode = CACHE_MODE_WHEN_MISSING;
 		log_verbose("Cache pool %s is missing cache mode, using %s.",
 			    display_lvname(cpool_seg->lv),
@@ -145,16 +107,6 @@ static int _cache_pool_text_import(struct lv_segment *seg,
 			return SEG_LOG_ERROR("Failed to duplicate policy in");
 	}
 
-	if (dm_config_has_node(sn, "metadata_format")) {
-		if (!dm_config_get_uint32(sn, "metadata_format", &seg->cache_metadata_format) ||
-		    ((seg->cache_metadata_format != CACHE_METADATA_FORMAT_1) &&
-		     (seg->cache_metadata_format != CACHE_METADATA_FORMAT_2)))
-			return SEG_LOG_ERROR("Unknown cache metadata format %u number in",
-					     seg->cache_metadata_format);
-		if (seg->cache_metadata_format == CACHE_METADATA_FORMAT_2)
-			seg->lv->status |= LV_METADATA_FORMAT;
-	}
-
 	/*
 	 * Read in policy args:
 	 *   policy_settings {
@@ -212,31 +164,12 @@ static int _cache_pool_text_export(const struct lv_segment *seg,
 	outf(f, "metadata = \"%s\"", seg->metadata_lv->name);
 	outf(f, "chunk_size = %" PRIu32, seg->chunk_size);
 
-	switch (seg->cache_metadata_format) {
-	case CACHE_METADATA_FORMAT_UNSELECTED:
-		/* Unselected format is not printed */
-		break;
-	case CACHE_METADATA_FORMAT_1:
-		/* If format 1 was already specified with cache pool, store it,
-		 * otherwise format gets stored when LV is cached.
-		 * NB: format 1 could be lost anytime, it's a default format.
-		 * Older lvm2 tool can easily drop it.
-		 */
-	case CACHE_METADATA_FORMAT_2: /* more in future ? */
-		outf(f, "metadata_format = " FMTu32, seg->cache_metadata_format);
-		break;
-	default:
-		log_error(INTERNAL_ERROR "LV %s is using unknown cache metadada format %u.",
-			  display_lvname(seg->lv), seg->cache_metadata_format);
-		return 0;
-	}
-
 	/*
 	 * Cache pool used by a cache LV holds data. Not ideal,
 	 * but not worth to break backward compatibility, by shifting
 	 * content to cache segment
 	 */
-	if (seg->cache_mode != CACHE_MODE_UNSELECTED) {
+	if (seg->cache_mode != CACHE_MODE_UNDEFINED) {
 		if (!(cache_mode = get_cache_mode_name(seg)))
 			return_0;
 		outf(f, "cache_mode = \"%s\"", cache_mode);
@@ -265,39 +198,6 @@ static void _destroy(struct segment_type *segtype)
 }
 
 #ifdef DEVMAPPER_SUPPORT
-/*
- * Parse and look for kernel symbol in /proc/kallsyms
- * this could be our only change to figure out there is
- * cache policy symbol already in the monolithic kernel
- * where 'modprobe dm-cache-smq' will simply not work
- */
-static int _lookup_kallsyms(const char *symbol)
-{
-	static const char _syms[] = "/proc/kallsyms";
-	int ret = 0;
-	char *line = NULL;
-	size_t len;
-	FILE *s;
-
-	if (!(s = fopen(_syms, "r")))
-		log_sys_debug("fopen", _syms);
-	else {
-		while (getline(&line, &len, s) != -1)
-			if (strstr(line, symbol)) {
-				ret = 1; /* Found symbol */
-				log_debug("Found kernel symbol%s.", symbol); /* space is in symbol */
-				break;
-			}
-
-		free(line);
-		if (fclose(s))
-			log_sys_debug("fclose", _syms);
-	}
-
-	return ret;
-}
-
-
 static int _target_present(struct cmd_context *cmd,
 			   const struct lv_segment *seg __attribute__((unused)),
 			   unsigned *attributes __attribute__((unused)))
@@ -310,15 +210,13 @@ static int _target_present(struct cmd_context *cmd,
 		unsigned cache_alias;
 		const char feature[12];
 		const char module[12]; /* check dm-%s */
-		const char ksymbol[12]; /* check for kernel symbol */
 		const char *aliasing;
 	} _features[] = {
-		{ 1, 10, CACHE_FEATURE_METADATA2, 0, "metadata2" },
 		/* Assumption: cache >=1.9 always aliases MQ policy */
 		{ 1, 9, CACHE_FEATURE_POLICY_SMQ, CACHE_FEATURE_POLICY_MQ, "policy_smq", "cache-smq",
-		 " smq_exit", " and aliases cache-mq" },
-		{ 1, 8, CACHE_FEATURE_POLICY_SMQ, 0, "policy_smq", "cache-smq", " smq_exit" },
-		{ 1, 3, CACHE_FEATURE_POLICY_MQ, 0, "policy_mq", "cache-mq", " mq_init" },
+		" and aliases cache-mq" },
+		{ 1, 8, CACHE_FEATURE_POLICY_SMQ, 0, "policy_smq", "cache-smq" },
+		{ 1, 3, CACHE_FEATURE_POLICY_MQ, 0, "policy_mq", "cache-mq" },
 	};
 	static const char _lvmconf[] = "global/cache_disabled_features";
 	static unsigned _attrs = 0;
@@ -352,20 +250,9 @@ static int _target_present(struct cmd_context *cmd,
 		for (i = 0; i < DM_ARRAY_SIZE(_features); ++i) {
 			if (_attrs & _features[i].cache_feature)
 				continue; /* already present */
-
-			if (!_features[i].module[0]) {
-				if ((maj > _features[i].maj) ||
-				    (maj == _features[i].maj && min >= _features[i].min)) {
-					log_debug_activation("Cache supports %s.",
-							     _features[i].feature);
-					_attrs |= _features[i].cache_feature;
-				}
-				continue;
-			}
 			if (((maj > _features[i].maj) ||
 			     (maj == _features[i].maj && min >= _features[i].min)) &&
-			    ((_features[i].ksymbol[0] && _lookup_kallsyms(_features[i].ksymbol)) ||
-			     module_present(cmd, _features[i].module))) {
+			    module_present(cmd, _features[i].module)) {
 				log_debug_activation("Cache policy %s is available%s.",
 						     _features[i].module,
 						     _features[i].aliasing ? : "");
@@ -423,7 +310,6 @@ static int _modules_needed(struct dm_pool *mem,
 #endif /* DEVMAPPER_SUPPORT */
 
 static struct segtype_handler _cache_pool_ops = {
-	.display = _cache_display,
 	.text_import = _cache_pool_text_import,
 	.text_import_area_count = _cache_pool_text_import_area_count,
 	.text_export = _cache_pool_text_export,
@@ -513,7 +399,6 @@ static int _cache_add_target_line(struct dev_manager *dm,
 	struct lv_segment *cache_pool_seg;
 	char *metadata_uuid, *data_uuid, *origin_uuid;
 	uint64_t feature_flags = 0;
-	unsigned attr;
 
 	if (!seg->pool_lv || !seg_is_cache(seg)) {
 		log_error(INTERNAL_ERROR "Passed segment is not cache.");
@@ -541,26 +426,6 @@ static int _cache_add_target_line(struct dev_manager *dm,
 			break;
 		}
 
-	switch (cache_pool_seg->cache_metadata_format) {
-	case CACHE_METADATA_FORMAT_1: break;
-	case CACHE_METADATA_FORMAT_2:
-		if (!_target_present(cmd, NULL, &attr))
-			return_0;
-
-		if (!(attr & CACHE_FEATURE_METADATA2)) {
-			log_error("LV %s has metadata format %u unsuported by kernel.",
-				  display_lvname(seg->lv), cache_pool_seg->cache_metadata_format);
-			return 0;
-		}
-		feature_flags |= DM_CACHE_FEATURE_METADATA2;
-		log_debug_activation("Using metadata2 format for %s.", display_lvname(seg->lv));
-		break;
-	default:
-		log_error(INTERNAL_ERROR "LV %s has unknown metadata format %u.",
-			  display_lvname(seg->lv), cache_pool_seg->cache_metadata_format);
-		return 0;
-	}
-
 	if (!(metadata_uuid = build_dm_uuid(mem, cache_pool_seg->metadata_lv, NULL)))
 		return_0;
 
@@ -587,7 +452,6 @@ static int _cache_add_target_line(struct dev_manager *dm,
 #endif /* DEVMAPPER_SUPPORT */
 
 static struct segtype_handler _cache_ops = {
-	.display = _cache_display,
 	.text_import = _cache_text_import,
 	.text_import_area_count = _cache_text_import_area_count,
 	.text_export = _cache_text_export,

lib/commands/toolcontext.c

@@ -192,9 +192,6 @@ static int _get_env_vars(struct cmd_context *cmd)
 		}
 	}
 
-	if (strcmp((getenv("LVM_RUN_BY_DMEVENTD") ? : "0"), "1") == 0)
-		init_run_by_dmeventd(cmd);
-
 	return 1;
 }
 
@@ -474,12 +471,10 @@ bad:
 
 int process_profilable_config(struct cmd_context *cmd)
 {
-	const char *units;
-
 	if (!(cmd->default_settings.unit_factor =
-	      dm_units_to_factor(units = find_config_tree_str(cmd, global_units_CFG, NULL),
+	      dm_units_to_factor(find_config_tree_str(cmd, global_units_CFG, NULL),
 				 &cmd->default_settings.unit_type, 1, NULL))) {
-		log_error("Unrecognised configuration setting for global/units: %s", units);
+		log_error("Invalid units specification");
 		return 0;
 	}
 
@@ -1002,7 +997,7 @@ static int _init_dev_cache(struct cmd_context *cmd)
 
 	if (!(cn = find_config_tree_array(cmd, devices_scan_CFG, NULL))) {
 		log_error(INTERNAL_ERROR "Unable to find configuration for devices/scan.");
-		return 0;
+		return_0;
 	}
 
 	for (cv = cn->v; cv; cv = cv->next) {
@@ -1760,15 +1755,6 @@ bad:
 	return 0;
 }
 
-int init_run_by_dmeventd(struct cmd_context *cmd)
-{
-	init_dmeventd_monitor(DMEVENTD_MONITOR_IGNORE);
-	init_ignore_suspended_devices(1);
-	init_disable_dmeventd_monitoring(1); /* Lock settings */
-
-	return 0;
-}
-
 void destroy_config_context(struct cmd_context *cmd)
 {
 	_destroy_config(cmd);
@@ -2011,6 +1997,7 @@ out:
 		cmd = NULL;
 	}
 
+
 	return cmd;
 }
 

lib/commands/toolcontext.h

@@ -89,7 +89,6 @@ struct cmd_context {
 	 */
 	const char *cmd_line;
 	const char *name; /* needed before cmd->command is set */
-	struct command_name *cname;
 	struct command *command;
 	char **argv;
 	struct arg_values *opt_arg_values;
@@ -242,7 +241,6 @@ int config_files_changed(struct cmd_context *cmd);
 int init_lvmcache_orphans(struct cmd_context *cmd);
 int init_filters(struct cmd_context *cmd, unsigned load_persistent_cache);
 int init_connections(struct cmd_context *cmd);
-int init_run_by_dmeventd(struct cmd_context *cmd);
 
 /*
  * A config context is a very light weight cmd struct that

lib/config/config.c

@@ -65,11 +65,11 @@ struct config_source {
  * Map each ID to respective definition of the configuration item.
  */
 static struct cfg_def_item _cfg_def_items[CFG_COUNT + 1] = {
-#define cfg_section(id, name, parent, flags, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_SECTION, {0}, (flags), since_version, {0}, deprecated_since_version, deprecation_comment, comment},
-#define cfg(id, name, parent, flags, type, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) {id, parent, name, type, {.v_##type = (default_value)}, (flags), since_version, {.v_UNCONFIGURED = (unconfigured_value)}, deprecated_since_version, deprecation_comment, comment},
-#define cfg_runtime(id, name, parent, flags, type, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, type, {.fn_##type = get_default_##id}, (flags) | CFG_DEFAULT_RUN_TIME, since_version, {.fn_UNCONFIGURED = get_default_unconfigured_##id}, deprecated_since_version, (deprecation_comment), comment},
-#define cfg_array(id, name, parent, flags, types, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_ARRAY | (types), {.v_CFG_TYPE_STRING = (default_value)}, (flags), (since_version), {.v_UNCONFIGURED = (unconfigured_value)}, deprecated_since_version, deprecation_comment, comment},
-#define cfg_array_runtime(id, name, parent, flags, types, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_ARRAY | (types), {.fn_CFG_TYPE_STRING = get_default_##id}, (flags) | CFG_DEFAULT_RUN_TIME, (since_version), {.fn_UNCONFIGURED = get_default_unconfigured_##id}, deprecated_since_version, deprecation_comment, comment},
+#define cfg_section(id, name, parent, flags, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_SECTION, {0}, flags, since_version, {0}, deprecated_since_version, deprecation_comment, comment},
+#define cfg(id, name, parent, flags, type, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) {id, parent, name, type, {.v_##type = default_value}, flags, since_version, {.v_UNCONFIGURED = unconfigured_value}, deprecated_since_version, deprecation_comment, comment},
+#define cfg_runtime(id, name, parent, flags, type, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, type, {.fn_##type = get_default_##id}, flags | CFG_DEFAULT_RUN_TIME, since_version, {.fn_UNCONFIGURED = get_default_unconfigured_##id}, deprecated_since_version, deprecation_comment, comment},
+#define cfg_array(id, name, parent, flags, types, default_value, since_version, unconfigured_value, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_ARRAY | types, {.v_CFG_TYPE_STRING = default_value}, flags, since_version, {.v_UNCONFIGURED = unconfigured_value}, deprecated_since_version, deprecation_comment, comment},
+#define cfg_array_runtime(id, name, parent, flags, types, since_version, deprecated_since_version, deprecation_comment, comment) {id, parent, name, CFG_TYPE_ARRAY | types, {.fn_CFG_TYPE_STRING = get_default_##id}, flags | CFG_DEFAULT_RUN_TIME, since_version, {.fn_UNCONFIGURED = get_default_unconfigured_##id}, deprecated_since_version, deprecation_comment, comment},
 #include "config_settings.h"
 #undef cfg_section
 #undef cfg
@@ -389,7 +389,7 @@ int override_config_tree_from_string(struct cmd_context *cmd,
 	    !config_force_check(cmd, CONFIG_STRING, cft_new)) {
 		log_error("Ignoring invalid configuration string.");
 		dm_config_destroy(cft_new);
-		return 0;
+		return_0;
 	}
 
 	if (!(cs = dm_pool_zalloc(cft_new->mem, sizeof(struct config_source)))) {
@@ -481,8 +481,7 @@ int override_config_tree_from_profile(struct cmd_context *cmd,
 
 	if (profile->source == CONFIG_PROFILE_COMMAND)
 		return _override_config_tree_from_command_profile(cmd, profile);
-
-	if (profile->source == CONFIG_PROFILE_METADATA)
+	else if (profile->source == CONFIG_PROFILE_METADATA)
 		return _override_config_tree_from_metadata_profile(cmd, profile);
 
 	log_error(INTERNAL_ERROR "override_config_tree_from_profile: incorrect profile source type");
@@ -620,9 +619,9 @@ struct timespec config_file_timestamp(struct dm_config_tree *cft)
 }
 
 #define cfg_def_get_item_p(id) (&_cfg_def_items[id])
-#define cfg_def_get_default_unconfigured_value_hint(cmd,item) (((item)->flags & CFG_DEFAULT_RUN_TIME) ? (item)->default_unconfigured_value.fn_UNCONFIGURED(cmd) : (item)->default_unconfigured_value.v_UNCONFIGURED)
-#define cfg_def_get_default_value_hint(cmd,item,type,profile) (((item)->flags & CFG_DEFAULT_RUN_TIME) ? (item)->default_value.fn_##type(cmd,profile) : (item)->default_value.v_##type)
-#define cfg_def_get_default_value(cmd,item,type,profile) ((item)->flags & CFG_DEFAULT_UNDEFINED ? 0 : cfg_def_get_default_value_hint(cmd,item,type,profile))
+#define cfg_def_get_default_unconfigured_value_hint(cmd,item) ((item->flags & CFG_DEFAULT_RUN_TIME) ? item->default_unconfigured_value.fn_UNCONFIGURED(cmd) : item->default_unconfigured_value.v_UNCONFIGURED)
+#define cfg_def_get_default_value_hint(cmd,item,type,profile) ((item->flags & CFG_DEFAULT_RUN_TIME) ? item->default_value.fn_##type(cmd,profile) : item->default_value.v_##type)
+#define cfg_def_get_default_value(cmd,item,type,profile) (item->flags & CFG_DEFAULT_UNDEFINED ? 0 : cfg_def_get_default_value_hint(cmd,item,type,profile))
 
 static int _cfg_def_make_path(char *buf, size_t buf_size, int id, cfg_def_item_t *item, int xlate)
 {
@@ -743,16 +742,14 @@ static struct dm_config_value *_get_def_array_values(struct cmd_context *cmd,
 		switch (toupper(token[0])) {
 			case 'I':
 			case 'B':
-				errno = 0;
 				v->v.i = strtoll(token + 1, &r, 10);
-				if (errno || *r)
+				if (*r)
 					goto bad;
 				v->type = DM_CFG_INT;
 				break;
 			case 'F':
-				errno = 0;
 				v->v.f = strtod(token + 1, &r);
-				if (errno || *r)
+				if (*r)
 					goto bad;
 				v->type = DM_CFG_FLOAT;
 				break;
@@ -1880,12 +1877,6 @@ int config_write(struct dm_config_tree *cft,
 	}
 
 	log_verbose("Dumping configuration to %s", file);
-
-	if (tree_spec->withgeneralpreamble)
-		fprintf(baton.fp, CFG_PREAMBLE_GENERAL);
-	if (tree_spec->withlocalpreamble)
-		fprintf(baton.fp, CFG_PREAMBLE_LOCAL);
-
 	if (!argc) {
 		if (!dm_config_write_node_out(cft->root, &_out_spec, &baton)) {
 			log_error("Failure while writing to %s", file);
@@ -2451,13 +2442,21 @@ const char *get_default_activation_mirror_image_fault_policy_CFG(struct cmd_cont
 
 int get_default_allocation_thin_pool_chunk_size_CFG(struct cmd_context *cmd, struct profile *profile)
 {
+	const char *str;
 	uint32_t chunk_size;
-	int chunk_size_calc_method;
 
-	if (!get_default_allocation_thin_pool_chunk_size(cmd, profile, &chunk_size,
-							 &chunk_size_calc_method)) {
-		stack; /* Ignore this error, never happens... */
+	if (!(str = find_config_tree_str(cmd, allocation_thin_pool_chunk_size_policy_CFG, profile))) {
+		log_error(INTERNAL_ERROR "Cannot find configuration.");
+		return 0;
+	}
+
+	if (!strcasecmp(str, "generic"))
 		chunk_size = DEFAULT_THIN_POOL_CHUNK_SIZE * 2;
+	else if (!strcasecmp(str, "performance"))
+		chunk_size = DEFAULT_THIN_POOL_CHUNK_SIZE_PERFORMANCE * 2;
+	else {
+		log_error("Thin pool chunk size calculation policy \"%s\" is unrecognised.", str);
+		return 0;
 	}
 
 	return (int) chunk_size;

lib/config/config.h

@@ -141,7 +141,6 @@ typedef struct cfg_def_item {
 	uint16_t deprecated_since_version;				/* version since this item is deprecated */
 	const char *deprecation_comment;				/* comment about reasons for deprecation and settings that supersede this one */
 	const char *comment;						/* comment */
-	const char *file_premable;					/* comment text to use at the start of the file */
 } cfg_def_item_t;
 
 /* configuration definition tree types */
@@ -174,8 +173,6 @@ struct config_def_tree_spec {
 	unsigned withversions:1;		/* include versions */
 	unsigned withspaces:1;			/* add more spaces in output for better readability */
 	unsigned unconfigured:1;		/* use unconfigured path strings */
-	unsigned withgeneralpreamble:1;		/* include preamble for a general config file */
-	unsigned withlocalpreamble:1;		/* include preamble for a local config file */
 	uint8_t *check_status;			/* status of last tree check (currently needed for CFG_DEF_TREE_MISSING only) */
 };
 

lib/config/config_settings.h

@@ -121,30 +121,6 @@
 
 cfg_section(root_CFG_SECTION, "(root)", root_CFG_SECTION, 0, vsn(0, 0, 0), 0, NULL, NULL)
 
-#define CFG_PREAMBLE_GENERAL \
-	"# This is an example configuration file for the LVM2 system.\n" \
-	"# It contains the default settings that would be used if there was no\n" \
-	"# @DEFAULT_SYS_DIR@/lvm.conf file.\n" \
-	"#\n" \
-	"# Refer to 'man lvm.conf' for further information including the file layout.\n" \
-	"#\n" \
-	"# Refer to 'man lvm.conf' for information about how settings configured in\n" \
-	"# this file are combined with built-in values and command line options to\n" \
-	"# arrive at the final values used by LVM.\n" \
-	"#\n" \
-	"# Refer to 'man lvmconfig' for information about displaying the built-in\n" \
-	"# and configured values used by LVM.\n" \
-	"#\n" \
-	"# If a default value is set in this file (not commented out), then a\n" \
-	"# new version of LVM using this file will continue using that value,\n" \
-	"# even if the new version of LVM changes the built-in default value.\n" \
-	"#\n" \
-	"# To put this file in a different directory and override @DEFAULT_SYS_DIR@ set\n" \
-	"# the environment variable LVM_SYSTEM_DIR before running the tools.\n" \
-	"#\n" \
-	"# N.B. Take care that each setting only appears once if uncommenting\n" \
-	"# example settings in this file.\n\n"
-
 cfg_section(config_CFG_SECTION, "config", root_CFG_SECTION, 0, vsn(2, 2, 99), 0, NULL,
 	"How LVM configuration settings are handled.\n")
 
@@ -185,26 +161,6 @@ cfg_section(tags_CFG_SECTION, "tags", root_CFG_SECTION, CFG_DEFAULT_COMMENTED, v
 cfg_section(local_CFG_SECTION, "local", root_CFG_SECTION, 0, vsn(2, 2, 117), 0, NULL,
 	"LVM settings that are specific to the local host.\n")
 
-#define CFG_PREAMBLE_LOCAL \
-	"# This is a local configuration file template for the LVM2 system\n" \
-	"# which should be installed as @DEFAULT_SYS_DIR@/lvmlocal.conf .\n" \
-	"#\n" \
-	"# Refer to 'man lvm.conf' for information about the file layout.\n" \
-	"#\n" \
-	"# To put this file in a different directory and override\n" \
-	"# @DEFAULT_SYS_DIR@ set the environment variable LVM_SYSTEM_DIR before\n" \
-	"# running the tools.\n" \
-	"#\n" \
-	"# The lvmlocal.conf file is normally expected to contain only the\n" \
-	"# \"local\" section which contains settings that should not be shared or\n" \
-	"# repeated among different hosts.  (But if other sections are present,\n" \
-	"# they *will* get processed.  Settings in this file override equivalent\n" \
-	"# ones in lvm.conf and are in turn overridden by ones in any enabled\n" \
-	"# lvm_<tag>.conf files.)\n" \
-	"#\n" \
-	"# Please take care that each setting only appears once if uncommenting\n" \
-	"# example settings in this file and never copy this file between hosts.\n\n"
-
 cfg(config_checks_CFG, "checks", config_CFG_SECTION, 0, CFG_TYPE_BOOL, 1, vsn(2, 2, 99), NULL, 0, NULL,
 	"If enabled, any LVM configuration mismatch is reported.\n"
 	"This implies checking that the configuration key is understood by\n"
@@ -513,28 +469,18 @@ cfg(allocation_mirror_logs_require_separate_pvs_CFG, "mirror_logs_require_separa
 
 cfg(allocation_raid_stripe_all_devices_CFG, "raid_stripe_all_devices", allocation_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_BOOL, DEFAULT_ALLOCATION_STRIPE_ALL_DEVICES, vsn(2, 2, 162), NULL, 0, NULL,
 	"Stripe across all PVs when RAID stripes are not specified.\n"
-	"If enabled, all PVs in the VG or on the command line are used for\n"
-	"raid0/4/5/6/10 when the command does not specify the number of\n"
-	"stripes to use.\n"
+	"If enabled, all PVs in the VG or on the command line are used for raid0/4/5/6/10\n"
+	"when the command does not specify the number of stripes to use.\n"
 	"This was the default behaviour until release 2.02.162.\n")
 
-cfg(allocation_cache_pool_metadata_require_separate_pvs_CFG, "cache_pool_metadata_require_separate_pvs", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA, CFG_TYPE_BOOL, DEFAULT_CACHE_POOL_METADATA_REQUIRE_SEPARATE_PVS, vsn(2, 2, 106), NULL, 0, NULL,
+cfg(allocation_cache_pool_metadata_require_separate_pvs_CFG, "cache_pool_metadata_require_separate_pvs", allocation_CFG_SECTION, 0, CFG_TYPE_BOOL, DEFAULT_CACHE_POOL_METADATA_REQUIRE_SEPARATE_PVS, vsn(2, 2, 106), NULL, 0, NULL,
 	"Cache pool metadata and data will always use different PVs.\n")
 
-cfg(allocation_cache_pool_cachemode_CFG, "cache_pool_cachemode", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_CACHE_MODE, vsn(2, 2, 113), NULL, vsn(2, 2, 128),
+cfg(allocation_cache_pool_cachemode_CFG, "cache_pool_cachemode", allocation_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_CACHE_MODE, vsn(2, 2, 113), NULL, vsn(2, 2, 128),
 	"This has been replaced by the allocation/cache_mode setting.\n",
 	"Cache mode.\n")
 
-cfg(allocation_cache_metadata_format_CFG, "cache_metadata_format", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_CACHE_METADATA_FORMAT, vsn(2, 2, 169), NULL, 0, NULL,
-	"Sets default metadata format for new cache.\n"
-	"#\n"
-	"Accepted values:\n"
-	"  0  Automatically detected best available format\n"
-	"  1  Original format\n"
-	"  2  Improved 2nd. generation format\n"
-	"#\n")
-
-cfg(allocation_cache_mode_CFG, "cache_mode", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_CACHE_MODE, vsn(2, 2, 128), NULL, 0, NULL,
+cfg(allocation_cache_mode_CFG, "cache_mode", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_CACHE_MODE, vsn(2, 2, 128), NULL, 0, NULL,
 	"The default cache mode used for new cache.\n"
 	"#\n"
 	"Accepted values:\n"
@@ -546,20 +492,20 @@ cfg(allocation_cache_mode_CFG, "cache_mode", allocation_CFG_SECTION, CFG_PROFILA
 	"#\n"
 	"This setting replaces allocation/cache_pool_cachemode.\n")
 
-cfg(allocation_cache_policy_CFG, "cache_policy", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_UNDEFINED, CFG_TYPE_STRING, 0, vsn(2, 2, 128), NULL, 0, NULL,
+cfg(allocation_cache_policy_CFG, "cache_policy", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_DEFAULT_UNDEFINED, CFG_TYPE_STRING, 0, vsn(2, 2, 128), NULL, 0, NULL,
 	"The default cache policy used for new cache volume.\n"
-	"Since kernel 4.2 the default policy is smq (Stochastic multiqueue),\n"
+	"Since kernel 4.2 the default policy is smq (Stochastic multique),\n"
 	"otherwise the older mq (Multiqueue) policy is selected.\n")
 
-cfg_section(allocation_cache_settings_CFG_SECTION, "cache_settings", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, vsn(2, 2, 128), 0, NULL,
+cfg_section(allocation_cache_settings_CFG_SECTION, "cache_settings", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_DEFAULT_COMMENTED, vsn(2, 2, 128), 0, NULL,
 	"Settings for the cache policy.\n"
 	"See documentation for individual cache policies for more info.\n")
 
-cfg_section(policy_settings_CFG_SUBSECTION, "policy_settings", allocation_cache_settings_CFG_SECTION, CFG_NAME_VARIABLE | CFG_SECTION_NO_CHECK | CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_COMMENTED, vsn(2, 2, 128), 0, NULL,
+cfg_section(policy_settings_CFG_SUBSECTION, "policy_settings", allocation_cache_settings_CFG_SECTION, CFG_NAME_VARIABLE | CFG_SECTION_NO_CHECK | CFG_PROFILABLE | CFG_DEFAULT_COMMENTED, vsn(2, 2, 128), 0, NULL,
 	"Replace this subsection name with a policy name.\n"
 	"Multiple subsections for different policies can be created.\n")
 
-cfg_runtime(allocation_cache_pool_chunk_size_CFG, "cache_pool_chunk_size", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_UNDEFINED, CFG_TYPE_INT, vsn(2, 2, 106), 0, NULL,
+cfg_runtime(allocation_cache_pool_chunk_size_CFG, "cache_pool_chunk_size", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_DEFAULT_UNDEFINED, CFG_TYPE_INT, vsn(2, 2, 106), 0, NULL,
 	"The minimal chunk size in KiB for cache pool volumes.\n"
 	"Using a chunk_size that is too large can result in wasteful use of\n"
 	"the cache, where small reads and writes can cause large sections of\n"
@@ -570,7 +516,7 @@ cfg_runtime(allocation_cache_pool_chunk_size_CFG, "cache_pool_chunk_size", alloc
 	"on the smaller end of the spectrum. Supported values range from\n"
 	"32KiB to 1GiB in multiples of 32.\n")
 
-cfg(allocation_cache_pool_max_chunks_CFG, "cache_pool_max_chunks", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_PROFILABLE_METADATA | CFG_DEFAULT_UNDEFINED, CFG_TYPE_INT, 0, vsn(2, 2, 165), NULL, 0, NULL,
+cfg(allocation_cache_pool_max_chunks_CFG, "cache_pool_max_chunks", allocation_CFG_SECTION, CFG_PROFILABLE | CFG_DEFAULT_UNDEFINED, CFG_TYPE_INT, 0, vsn(2, 2, 165), NULL, 0, NULL,
 	"The maximum number of chunks in a cache pool.\n"
 	"For cache target v1.9 the recommended maximumm is 1000000 chunks.\n"
 	"Using cache pool with more chunks may degrade cache performance.\n")
@@ -979,7 +925,7 @@ cfg(global_use_lvmetad_CFG, "use_lvmetad", global_CFG_SECTION, 0, CFG_TYPE_BOOL,
 	"devices/global_filter.\n")
 
 cfg(global_lvmetad_update_wait_time_CFG, "lvmetad_update_wait_time", global_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_INT, DEFAULT_LVMETAD_UPDATE_WAIT_TIME, vsn(2, 2, 151), NULL, 0, NULL,
-	"Number of seconds a command will wait for lvmetad update to finish.\n"
+	"The number of seconds a command will wait for lvmetad update to finish.\n"
 	"After waiting for this period, a command will not use lvmetad, and\n"
 	"will revert to disk scanning.\n")
 
@@ -1046,7 +992,7 @@ cfg_array(global_thin_disabled_features_CFG, "thin_disabled_features", global_CF
 cfg_array(global_cache_disabled_features_CFG, "cache_disabled_features", global_CFG_SECTION, CFG_ALLOW_EMPTY | CFG_DEFAULT_UNDEFINED, CFG_TYPE_STRING, NULL, vsn(2, 2, 128), NULL, 0, NULL,
 	"Features to not use in the cache driver.\n"
 	"This can be helpful for testing, or to avoid using a feature that is\n"
-	"causing problems. Features include: policy_mq, policy_smq, metadata2.\n"
+	"causing problems. Features include: policy_mq, policy_smq.\n"
 	"#\n"
 	"Example\n"
 	"cache_disabled_features = [ \"policy_smq\" ]\n"
@@ -1080,10 +1026,6 @@ cfg_array(global_cache_check_options_CFG, "cache_check_options", global_CFG_SECT
 cfg_array(global_cache_repair_options_CFG, "cache_repair_options", global_CFG_SECTION, CFG_ALLOW_EMPTY | CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_CACHE_REPAIR_OPTIONS_CONFIG, vsn(2, 2, 108), NULL, 0, NULL,
 	"List of options passed to the cache_repair command.\n")
 
-cfg(global_fsadm_executable_CFG, "fsadm_executable", global_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_FSADM_PATH, vsn(2, 2, 170), "@FSADM_PATH@", 0, NULL,
-	"The full path to the fsadm command.\n"
-	"LVM uses this command to help with lvresize -r operations.\n")
-
 cfg(global_system_id_source_CFG, "system_id_source", global_CFG_SECTION, 0, CFG_TYPE_STRING, DEFAULT_SYSTEM_ID_SOURCE, vsn(2, 2, 117), NULL, 0, NULL,
 	"The method LVM uses to set the local system ID.\n"
 	"Volume Groups can also be given a system ID (by vgcreate, vgchange,\n"
@@ -1279,15 +1221,14 @@ cfg_array(activation_read_only_volume_list_CFG, "read_only_volume_list", activat
 	"read_only_volume_list = [ \"vg1\", \"vg2/lvol1\", \"@tag1\", \"@*\" ]\n"
 	"#\n")
 
- cfg(activation_mirror_region_size_CFG, "mirror_region_size", activation_CFG_SECTION, 0, CFG_TYPE_INT, DEFAULT_RAID_REGION_SIZE, vsn(1, 0, 0), NULL, vsn(2, 2, 99),
+cfg(activation_mirror_region_size_CFG, "mirror_region_size", activation_CFG_SECTION, 0, CFG_TYPE_INT, DEFAULT_RAID_REGION_SIZE, vsn(1, 0, 0), NULL, vsn(2, 2, 99),
 	"This has been replaced by the activation/raid_region_size setting.\n",
-	"Size in KiB of each raid or mirror synchronization region.\n")
+        "Size in KiB of each copy operation when mirroring.\n")
 
 cfg(activation_raid_region_size_CFG, "raid_region_size", activation_CFG_SECTION, 0, CFG_TYPE_INT, DEFAULT_RAID_REGION_SIZE, vsn(2, 2, 99), NULL, 0, NULL,
 	"Size in KiB of each raid or mirror synchronization region.\n"
-	"The clean/dirty state of data is tracked for each region.\n"
-	"The value is rounded down to a power of two if necessary, and\n"
-	"is ignored if it is not a multiple of the machine memory page size.\n")
+	"For raid or mirror segment types, this is the amount of data that is\n"
+	"copied at once when initializing, or moved at once by pvmove.\n")
 
 cfg(activation_error_when_full_CFG, "error_when_full", activation_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_BOOL, DEFAULT_ERROR_WHEN_FULL, vsn(2, 2, 115), NULL, 0, NULL,
 	"Return errors if a thin pool runs out of space.\n"
@@ -1918,14 +1859,6 @@ cfg(dmeventd_thin_library_CFG, "thin_library", dmeventd_CFG_SECTION, 0, CFG_TYPE
 	"and emits a warning through syslog when the usage exceeds 80%. The\n"
 	"warning is repeated when 85%, 90% and 95% of the pool is filled.\n")
 
-cfg(dmeventd_thin_command_CFG, "thin_command", dmeventd_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_DMEVENTD_THIN_COMMAND, vsn(2, 2, 169), NULL, 0, NULL,
-	"The plugin runs command with each 5% increment when thin-pool data volume\n"
-	"or metadata volume gets above 50%.\n"
-	"Command which starts with 'lvm ' prefix is internal lvm command.\n"
-	"You can write your own handler to customise behaviour in more details.\n"
-	"User handler is specified with the full path starting with '/'.\n")
-	/* TODO: systemd service handler */
-
 cfg(dmeventd_executable_CFG, "executable", dmeventd_CFG_SECTION, CFG_DEFAULT_COMMENTED, CFG_TYPE_STRING, DEFAULT_DMEVENTD_PATH, vsn(2, 2, 73), "@DMEVENTD_PATH@", 0, NULL,
 	"The full path to the dmeventd binary.\n")
 

lib/config/defaults.h

@@ -71,7 +71,7 @@
  * FIXME: Increase these to 64 and further to the MD maximum
  *	  once the SubLVs split and name shift got enhanced
  */
-#define DEFAULT_RAID1_MAX_IMAGES 64
+#define DEFAULT_RAID1_MAX_IMAGES 10
 #define DEFAULT_RAID_MAX_IMAGES 64
 #define DEFAULT_ALLOCATION_STRIPE_ALL_DEVICES 0 /* Don't stripe across all devices if not -i/--stripes given */
 
@@ -81,7 +81,6 @@
 #define DEFAULT_DMEVENTD_MIRROR_LIB "libdevmapper-event-lvm2mirror.so"
 #define DEFAULT_DMEVENTD_SNAPSHOT_LIB "libdevmapper-event-lvm2snapshot.so"
 #define DEFAULT_DMEVENTD_THIN_LIB "libdevmapper-event-lvm2thin.so"
-#define DEFAULT_DMEVENTD_THIN_COMMAND "lvm lvextend --use-policies"
 #define DEFAULT_DMEVENTD_MONITOR 1
 #define DEFAULT_BACKGROUND_POLLING 1
 
@@ -104,9 +103,9 @@
 #define DEFAULT_THIN_REPAIR_OPTION1 ""
 #define DEFAULT_THIN_REPAIR_OPTIONS_CONFIG "#S" DEFAULT_THIN_REPAIR_OPTION1
 #define DEFAULT_THIN_POOL_METADATA_REQUIRE_SEPARATE_PVS 0
-#define DEFAULT_THIN_POOL_MAX_METADATA_SIZE (DM_THIN_MAX_METADATA_SIZE / 2)  /* KB */
+#define DEFAULT_THIN_POOL_MAX_METADATA_SIZE (16 * 1024 * 1024)  /* KB */
 #define DEFAULT_THIN_POOL_MIN_METADATA_SIZE 2048  /* KB */
-#define DEFAULT_THIN_POOL_OPTIMAL_METADATA_SIZE (128 * 1024) /* KB */
+#define DEFAULT_THIN_POOL_OPTIMAL_SIZE     (128 * 1024 * 1024)	/* KB */
 #define DEFAULT_THIN_POOL_CHUNK_SIZE_POLICY "generic"
 #define DEFAULT_THIN_POOL_CHUNK_SIZE	    64	  /* KB */
 #define DEFAULT_THIN_POOL_CHUNK_SIZE_PERFORMANCE 512 /* KB */
@@ -132,11 +131,8 @@
 #define DEFAULT_CACHE_POOL_MIN_METADATA_SIZE 2048  /* KB */
 #define DEFAULT_CACHE_POOL_MAX_METADATA_SIZE (16 * 1024 * 1024)  /* KB */
 #define DEFAULT_CACHE_POLICY "mq"
-#define DEFAULT_CACHE_METADATA_FORMAT CACHE_METADATA_FORMAT_UNSELECTED /* Autodetect */
 #define DEFAULT_CACHE_MODE "writethrough"
 
-#define DEFAULT_FSADM_PATH FSADM_PATH
-
 #define DEFAULT_UMASK 0077
 
 #define DEFAULT_FORMAT "lvm2"
@@ -180,7 +176,7 @@
 #define DEFAULT_INDENT 1
 #define DEFAULT_ABORT_ON_INTERNAL_ERRORS 0
 #define DEFAULT_DETECT_INTERNAL_VG_CACHE_CORRUPTION 0
-#define DEFAULT_UNITS "r"
+#define DEFAULT_UNITS "h"
 #define DEFAULT_SUFFIX 1
 #define DEFAULT_HOSTTAGS 0
 
@@ -202,7 +198,7 @@
 #define DEFAULT_ACTIVATION_MODE "degraded"
 #define DEFAULT_USE_LINEAR_TARGET 1
 #define DEFAULT_STRIPE_FILLER "error"
-#define DEFAULT_RAID_REGION_SIZE   2048	/* KB */
+#define DEFAULT_RAID_REGION_SIZE   512	/* KB */
 #define DEFAULT_INTERVAL 15
 
 #define DEFAULT_MAX_HISTORY 100

lib/device/dev-cache.c

@@ -320,8 +320,8 @@ static int _compare_paths(const char *path0, const char *path1)
 	/* ASCII comparison */
 	if (strcmp(path0, path1) < 0)
 		return 0;
-
-	return 1;
+	else
+		return 1;
 }
 
 static int _add_alias(struct device *dev, const char *path)
@@ -706,12 +706,6 @@ static int _insert_dev(const char *path, dev_t d)
 		}
 	}
 
-	if (dm_hash_lookup(_cache.names, path) == dev) {
-		/* Hash already has matching entry present */
-		log_debug("Path already cached %s.", path);
-		return 1;
-	}
-
 	if (!(path_copy = dm_pool_strdup(_cache.mem, path))) {
 		log_error("Failed to duplicate path string.");
 		return 0;
@@ -898,10 +892,10 @@ int dev_cache_index_devs(void)
 			if (errno == ENOENT) {
 				sysfs_has_dev_block = 0;
 				return 1;
+			} else {
+				log_sys_error("stat", path);
+				return 0;
 			}
-
-			log_sys_error("stat", path);
-			return 0;
 		}
 	} else if (!sysfs_has_dev_block)
 		return 1;

lib/device/dev-io.c

@@ -405,8 +405,8 @@ int dev_get_size(struct device *dev, uint64_t *size)
 
 	if ((dev->flags & DEV_REGULAR))
 		return _dev_get_size_file(dev, size);
-
-	return _dev_get_size_dev(dev, size);
+	else
+		return _dev_get_size_dev(dev, size);
 }
 
 int dev_get_read_ahead(struct device *dev, uint32_t *read_ahead)

lib/device/dev-md.c

@@ -28,7 +28,7 @@
 #define MD_SB_MAGIC 0xa92b4efc
 #define MD_RESERVED_BYTES (64 * 1024ULL)
 #define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512)
-#define MD_NEW_SIZE_SECTORS(x) (((x) & ~(MD_RESERVED_SECTORS - 1)) \
+#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) \
 				- MD_RESERVED_SECTORS)
 #define MD_MAX_SYSFS_SIZE 64
 

lib/device/dev-type.c

@@ -76,7 +76,7 @@ struct dev_types *create_dev_types(const char *proc_dir,
 			i++;
 
 		/* If it's not a number it may be name of section */
-		line_maj = atoi(line + i);
+		line_maj = atoi(((char *) (line + i)));
 
 		if (line_maj < 0 || line_maj >= NUMBER_OF_MAJORS) {
 			/*
@@ -125,10 +125,6 @@ struct dev_types *create_dev_types(const char *proc_dir,
 		if (!strncmp("emcpower", line + i, 8) && isspace(*(line + i + 8)))
 			dt->emcpower_major = line_maj;
 
-		/* Look for Veritas Dynamic Multipathing */
-		if (!strncmp("VxDMP", line + i, 5) && isspace(*(line + i + 5)))
-			dt->vxdmp_major = line_maj;
-
 		if (!strncmp("loop", line + i, 4) && isspace(*(line + i + 4)))
 			dt->loop_major = line_maj;
 
@@ -222,9 +218,6 @@ int dev_subsystem_part_major(struct dev_types *dt, struct device *dev)
 	if (MAJOR(dev->dev) == dt->power2_major)
 		return 1;
 
-	if (MAJOR(dev->dev) == dt->vxdmp_major)
-		return 1;
-
 	if ((MAJOR(dev->dev) == dt->blkext_major) &&
 	    dev_get_primary_dev(dt, dev, &primary_dev) &&
 	    (MAJOR(primary_dev) == dt->md_major))
@@ -253,9 +246,6 @@ const char *dev_subsystem_name(struct dev_types *dt, struct device *dev)
 	if (MAJOR(dev->dev) == dt->power2_major)
 		return "POWER2";
 
-	if (MAJOR(dev->dev) == dt->vxdmp_major)
-		return "VXDMP";
-
 	if (MAJOR(dev->dev) == dt->blkext_major)
 		return "BLKEXT";
 
@@ -615,38 +605,38 @@ static int _blkid_wipe(blkid_probe probe, struct device *dev, const char *name,
 			if (force < DONT_PROMPT) {
 				log_error(MSG_FAILED_SIG_OFFSET, type, name);
 				return 0;
+			} else {
+				log_error("WARNING: " MSG_FAILED_SIG_OFFSET MSG_WIPING_SKIPPED, type, name);
+				return 2;
 			}
-
-			log_error("WARNING: " MSG_FAILED_SIG_OFFSET MSG_WIPING_SKIPPED, type, name);
-			return 2;
 		}
 		if (blkid_probe_lookup_value(probe, "SBMAGIC", &magic, &len)) {
 			if (force < DONT_PROMPT) {
 				log_error(MSG_FAILED_SIG_LENGTH, type, name);
 				return 0;
+			} else {
+				log_warn("WARNING: " MSG_FAILED_SIG_LENGTH MSG_WIPING_SKIPPED, type, name);
+				return 2;
 			}
-
-			log_warn("WARNING: " MSG_FAILED_SIG_LENGTH MSG_WIPING_SKIPPED, type, name);
-			return 2;
 		}
 	} else if (!blkid_probe_lookup_value(probe, "PTTYPE", &type, NULL)) {
 		if (blkid_probe_lookup_value(probe, "PTMAGIC_OFFSET", &offset, NULL)) {
 			if (force < DONT_PROMPT) {
 				log_error(MSG_FAILED_SIG_OFFSET, type, name);
 				return 0;
+			} else {
+				log_warn("WARNING: " MSG_FAILED_SIG_OFFSET MSG_WIPING_SKIPPED, type, name);
+				return 2;
 			}
-
-			log_warn("WARNING: " MSG_FAILED_SIG_OFFSET MSG_WIPING_SKIPPED, type, name);
-			return 2;
 		}
 		if (blkid_probe_lookup_value(probe, "PTMAGIC", &magic, &len)) {
 			if (force < DONT_PROMPT) {
 				log_error(MSG_FAILED_SIG_LENGTH, type, name);
 				return 0;
+			} else {
+				log_warn("WARNING: " MSG_FAILED_SIG_LENGTH MSG_WIPING_SKIPPED, type, name);
+				return 2;
 			}
-
-			log_warn("WARNING: " MSG_FAILED_SIG_LENGTH MSG_WIPING_SKIPPED, type, name);
-			return 2;
 		}
 		usage = "partition table";
 	} else
@@ -1019,7 +1009,7 @@ int udev_dev_is_mpath_component(struct device *dev)
 
 	if (!udev_context) {
 		log_warn("WARNING: No udev context available to check if device %s is multipath component.", dev_name(dev));
-		return 0;
+		return_0;
 	}
 
 	while (1) {

lib/device/dev-type.h

@@ -41,7 +41,6 @@ struct dev_types {
 	int drbd_major;
 	int device_mapper_major;
 	int emcpower_major;
-	int vxdmp_major;
 	int power2_major;
 	int dasd_major;
 	int loop_major;

lib/device/device-types.h

@@ -63,6 +63,5 @@ static const dev_known_type_t _dev_known_types[] = {
 	{"bcache", 1, "bcache block device cache"},
 	{"nvme", 64, "NVM Express"},
 	{"zvol", 16, "ZFS Zvols"},
-	{"VxDMP", 16, "Veritas Dynamic Multipathing"},
 	{"", 0, ""}
 };

lib/display/display.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2017 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
  *
  * This file is part of LVM2.
  *
@@ -152,30 +152,6 @@ const char *display_lvname(const struct logical_volume *lv)
 	return name;
 }
 
-/* Display percentage with (TODO) configurable precision */
-const char *display_percent(struct cmd_context *cmd, dm_percent_t percent)
-{
-	char *buf;
-	int r;
-
-        /* Reusing same  ring buffer we use for displaying LV names */
-	if ((cmd->display_lvname_idx + NAME_LEN) >= sizeof((cmd->display_buffer)))
-		cmd->display_lvname_idx = 0;
-
-	buf = cmd->display_buffer + cmd->display_lvname_idx;
-	/* TODO: Make configurable hardcoded 2 digits */
-	r = dm_snprintf(buf, NAME_LEN, "%.2f", dm_percent_to_round_float(percent, 2));
-
-	if (r < 0) {
-		log_error("Percentage %d does not fit.", percent);
-		return NULL;
-	}
-
-	cmd->display_lvname_idx += r + 1;
-
-	return buf;
-}
-
 /* Size supplied in sectors */
 static const char *_display_size(const struct cmd_context *cmd,
 				 uint64_t size, dm_size_suffix_t suffix_type)
@@ -410,7 +386,6 @@ int lvdisplay_full(struct cmd_context *cmd,
 	dm_percent_t thin_data_percent, thin_metadata_percent;
 	int thin_active = 0;
 	dm_percent_t thin_percent;
-	struct lv_status_cache *cache_status = NULL;
 
 	if (lv_is_historical(lv))
 		return _lvdisplay_historical_full(cmd, lv);
@@ -516,19 +491,6 @@ int lvdisplay_full(struct cmd_context *cmd,
 		seg = first_seg(lv);
 		log_print("LV Pool metadata       %s", seg->metadata_lv->name);
 		log_print("LV Pool data           %s", seg_lv(seg, 0)->name);
-	} else if (lv_is_cache_origin(lv)) {
-		if ((seg = get_only_segment_using_this_lv(lv)))
-			log_print("LV origin of Cache LV  %s", seg->lv->name);
-	} else if (lv_is_cache(lv)) {
-		seg = first_seg(lv);
-		if (inkernel && !lv_cache_status(lv, &cache_status))
-                        return_0;
-		log_print("LV Cache pool name     %s", seg->pool_lv->name);
-		log_print("LV Cache origin name   %s", seg_lv(seg, 0)->name);
-	} else if (lv_is_cache_pool(lv)) {
-		seg = first_seg(lv);
-		log_print("LV Pool metadata       %s", seg->metadata_lv->name);
-		log_print("LV Pool data           %s", seg_lv(seg, 0)->name);
 	}
 
 	if (inkernel && info.suspended)
@@ -548,38 +510,17 @@ int lvdisplay_full(struct cmd_context *cmd,
 		  display_size(cmd,
 			       snap_seg ? snap_seg->origin->size : lv->size));
 
-	if (cache_status) {
-		log_print("Cache used blocks      %s%%",
-			  display_percent(cmd, cache_status->data_usage));
-		log_print("Cache metadata blocks  %s%%",
-			  display_percent(cmd, cache_status->metadata_usage));
-		log_print("Cache dirty blocks     %s%%",
-			  display_percent(cmd, cache_status->dirty_usage));
-		log_print("Cache read hits/misses " FMTu64 " / " FMTu64,
-			  cache_status->cache->read_hits,
-			  cache_status->cache->read_misses);
-		log_print("Cache wrt hits/misses  " FMTu64 " / " FMTu64,
-			  cache_status->cache->write_hits,
-			  cache_status->cache->write_misses);
-		log_print("Cache demotions        " FMTu64,
-			  cache_status->cache->demotions);
-		log_print("Cache promotions       " FMTu64,
-			  cache_status->cache->promotions);
-
-		dm_pool_destroy(cache_status->mem);
-	}
-
 	if (thin_data_active)
-		log_print("Allocated pool data    %s%%",
-			  display_percent(cmd, thin_data_percent));
+		log_print("Allocated pool data    %.2f%%",
+			  dm_percent_to_float(thin_data_percent));
 
 	if (thin_metadata_active)
-		log_print("Allocated metadata     %s%%",
-			  display_percent(cmd, thin_metadata_percent));
+		log_print("Allocated metadata     %.2f%%",
+			  dm_percent_to_float(thin_metadata_percent));
 
 	if (thin_active)
-		log_print("Mapped size            %s%%",
-			  display_percent(cmd, thin_percent));
+		log_print("Mapped size            %.2f%%",
+			  dm_percent_to_float(thin_percent));
 
 	log_print("Current LE             %u",
 		  snap_seg ? snap_seg->origin->le_count : lv->le_count);
@@ -590,8 +531,8 @@ int lvdisplay_full(struct cmd_context *cmd,
 		log_print("COW-table LE           %u", lv->le_count);
 
 		if (snap_active)
-			log_print("Allocated to snapshot  %s%%",
-				  display_percent(cmd, snap_percent));
+			log_print("Allocated to snapshot  %.2f%%",
+				  dm_percent_to_float(snap_percent));
 
 		log_print("Snapshot chunk size    %s",
 			  display_size(cmd, (uint64_t) snap_seg->chunk_size));

lib/display/display.h

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
- * Copyright (C) 2004-2017 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
  *
  * This file is part of LVM2.
  *
@@ -24,8 +24,6 @@
 
 const char *display_lvname(const struct logical_volume *lv);
 
-const char *display_percent(struct cmd_context *cmd, dm_percent_t percent);
-
 /* Specify size in KB */
 const char *display_size(const struct cmd_context *cmd, uint64_t size);
 const char *display_size_long(const struct cmd_context *cmd, uint64_t size);