1
1
mirror of https://github.com/systemd/systemd-stable.git synced 2024-10-31 07:51:08 +03:00
systemd-stable/udev_add.c

328 lines
8.1 KiB
C
Raw Normal View History

/*
* udev-add.c
*
* Userspace devfs
*
* Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <grp.h>
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
#include <net/if.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/sockios.h>
#include "libsysfs/sysfs/libsysfs.h"
#include "udev_libc_wrapper.h"
#include "udev.h"
#include "udev_utils.h"
2005-02-21 15:44:39 +03:00
#include "udev_sysfs.h"
#include "udev_version.h"
#include "logging.h"
#include "udev_rules.h"
2004-11-12 08:32:19 +03:00
#include "udev_db.h"
#include "udev_selinux.h"
2005-02-21 15:44:39 +03:00
int udev_make_node(struct udevice *udev, const char *file, dev_t devt, mode_t mode, uid_t uid, gid_t gid)
{
struct stat stats;
int retval = 0;
if (stat(file, &stats) != 0)
goto create;
/* preserve node with already correct numbers, to not change the inode number */
if (((stats.st_mode & S_IFMT) == S_IFBLK || (stats.st_mode & S_IFMT) == S_IFCHR) &&
2005-02-21 15:44:39 +03:00
(stats.st_rdev == devt)) {
info("preserve file '%s', cause it has correct dev_t", file);
selinux_setfilecon(file, udev->kernel_name, stats.st_mode);
goto perms;
}
if (unlink(file) != 0)
dbg("unlink(%s) failed with error '%s'", file, strerror(errno));
else
dbg("already present file '%s' unlinked", file);
create:
switch (udev->type) {
2005-03-12 23:41:57 +03:00
case DEV_BLOCK:
mode |= S_IFBLK;
break;
2005-03-12 23:41:57 +03:00
case DEV_CLASS:
mode |= S_IFCHR;
break;
default:
dbg("unknown node type %c\n", udev->type);
return -EINVAL;
}
selinux_setfscreatecon(file, udev->kernel_name, mode);
2005-02-21 15:44:39 +03:00
retval = mknod(file, mode, devt);
2005-04-27 10:52:14 +04:00
selinux_resetfscreatecon();
if (retval != 0) {
err("mknod(%s, %#o, %u, %u) failed with error '%s'",
2005-02-21 15:44:39 +03:00
file, mode, major(devt), minor(devt), strerror(errno));
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
}
perms:
dbg("chmod(%s, %#o)", file, mode);
if (chmod(file, mode) != 0) {
dbg("chmod(%s, %#o) failed with error '%s'", file, mode, strerror(errno));
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
}
if (uid != 0 || gid != 0) {
dbg("chown(%s, %u, %u)", file, uid, gid);
if (chown(file, uid, gid) != 0) {
dbg("chown(%s, %u, %u) failed with error '%s'",
file, uid, gid, strerror(errno));
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
}
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
exit:
return retval;
}
static int create_node(struct udevice *udev, struct sysfs_class_device *class_dev)
{
char filename[PATH_SIZE];
char partitionname[PATH_SIZE];
struct name_entry *name_loop;
uid_t uid;
gid_t gid;
int tail;
int i;
snprintf(filename, sizeof(filename), "%s/%s", udev_root, udev->name);
filename[sizeof(filename)-1] = '\0';
/* create parent directories if needed */
if (strchr(udev->name, '/'))
create_path(filename);
if (strcmp(udev->owner, "root") == 0)
uid = 0;
else {
char *endptr;
unsigned long id;
id = strtoul(udev->owner, &endptr, 10);
if (endptr[0] == '\0')
uid = (uid_t) id;
else
uid = lookup_user(udev->owner);
}
if (strcmp(udev->group, "root") == 0)
gid = 0;
else {
char *endptr;
unsigned long id;
id = strtoul(udev->group, &endptr, 10);
if (endptr[0] == '\0')
gid = (gid_t) id;
else
gid = lookup_group(udev->group);
}
if (!udev->test_run) {
info("creating device node '%s'", filename);
2005-02-21 15:44:39 +03:00
if (udev_make_node(udev, filename, udev->devt, udev->mode, uid, gid) != 0)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto error;
} else {
info("creating device node '%s', major = '%d', minor = '%d', "
"mode = '%#o', uid = '%d', gid = '%d'", filename,
2005-02-21 15:44:39 +03:00
major(udev->devt), minor(udev->devt), udev->mode, uid, gid);
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
/* create all_partitions if requested */
if (udev->partitions) {
struct sysfs_attribute *attr;
int range;
/* take the maximum registered minor range */
attr = sysfs_get_classdev_attr(class_dev, "range");
if (attr) {
range = atoi(attr->value);
if (range > 1)
udev->partitions = range-1;
}
info("creating device partition nodes '%s[1-%i]'", filename, udev->partitions);
if (!udev->test_run) {
for (i = 1; i <= udev->partitions; i++) {
2005-02-21 15:44:39 +03:00
dev_t part_devt;
snprintf(partitionname, sizeof(partitionname), "%s%d", filename, i);
partitionname[sizeof(partitionname)-1] = '\0';
2005-02-21 15:44:39 +03:00
part_devt = makedev(major(udev->devt), minor(udev->devt)+1);
udev_make_node(udev, partitionname, part_devt, udev->mode, uid, gid);
}
}
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
/* create symlink(s) if requested */
list_for_each_entry(name_loop, &udev->symlink_list, node) {
2005-04-27 10:52:14 +04:00
int retval;
char linktarget[PATH_SIZE];
snprintf(filename, sizeof(filename), "%s/%s", udev_root, name_loop->name);
filename[sizeof(filename)-1] = '\0';
dbg("symlink '%s' to node '%s' requested", filename, udev->name);
if (!udev->test_run)
if (strchr(filename, '/'))
create_path(filename);
/* optimize relative link */
linktarget[0] = '\0';
i = 0;
tail = 0;
while (udev->name[i] && (udev->name[i] == name_loop->name[i])) {
if (udev->name[i] == '/')
tail = i+1;
i++;
}
while (name_loop->name[i] != '\0') {
if (name_loop->name[i] == '/')
strlcat(linktarget, "../", sizeof(linktarget));
i++;
}
strlcat(linktarget, &udev->name[tail], sizeof(linktarget));
dbg("symlink(%s, %s)", linktarget, filename);
if (!udev->test_run) {
unlink(filename);
2005-04-27 10:52:14 +04:00
selinux_setfscreatecon(filename, udev->kernel_name, S_IFLNK);
retval = symlink(linktarget, filename);
selinux_resetfscreatecon();
if (retval != 0)
dbg("symlink(%s, %s) failed with error '%s'",
linktarget, filename, strerror(errno));
}
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
return 0;
error:
return -1;
}
static int rename_net_if(struct udevice *udev)
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
{
int sk;
struct ifreq ifr;
int retval;
info("changing net interface name from '%s' to '%s'", udev->kernel_name, udev->name);
if (udev->test_run)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
return 0;
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
sk = socket(PF_INET, SOCK_DGRAM, 0);
if (sk < 0) {
dbg("error opening socket");
return -1;
}
memset(&ifr, 0x00, sizeof(struct ifreq));
strlcpy(ifr.ifr_name, udev->kernel_name, IFNAMSIZ);
strlcpy(ifr.ifr_newname, udev->name, IFNAMSIZ);
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
retval = ioctl(sk, SIOCSIFNAME, &ifr);
if (retval != 0)
dbg("error changing net interface name");
close(sk);
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
return retval;
}
int udev_add_device(struct udevice *udev, struct sysfs_class_device *class_dev)
{
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
char *pos;
int retval = 0;
2005-03-12 23:41:57 +03:00
if (udev->type == DEV_BLOCK || udev->type == DEV_CLASS) {
2005-02-21 15:44:39 +03:00
udev->devt = get_devt(class_dev);
if (!udev->devt) {
dbg("no dev-file found, do nothing");
return 0;
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
}
}
if (udev_rules_get_name(udev, class_dev) != 0)
return 0;
dbg("adding name='%s'", udev->name);
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
selinux_init();
2005-03-12 23:41:57 +03:00
if (udev->type == DEV_BLOCK || udev->type == DEV_CLASS) {
retval = create_node(udev, class_dev);
if (retval != 0)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
2004-11-12 08:32:19 +03:00
if (udev_db_add_device(udev) != 0)
dbg("udev_db_add_dev failed, but we create the node anyway, "
"remove might not work for custom names");
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
/* use full path to the environment */
snprintf(udev->devname, sizeof(udev->devname), "%s/%s", udev_root, udev->name);
udev->devname[sizeof(udev->devname)-1] = '\0';
2005-03-12 23:41:57 +03:00
} else if (udev->type == DEV_NET) {
/* look if we want to change the name of the netif */
if (strcmp(udev->name, udev->kernel_name) != 0) {
retval = rename_net_if(udev);
if (retval != 0)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
/* we've changed the name, now fake the devpath, cause the
* original kernel name sleeps with the fishes and we don't
* get an event from the kernel with the new name
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
*/
pos = strrchr(udev->devpath, '/');
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
if (pos != NULL) {
pos[1] = '\0';
strlcat(udev->devpath, udev->name, sizeof(udev->devpath));
setenv("DEVPATH", udev->devpath, 1);
setenv("INTERFACE", udev->name, 1);
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
}
/* use netif name for the environment */
strlcpy(udev->devname, udev->name, sizeof(udev->devname));
}
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
}
exit:
2005-04-27 10:52:14 +04:00
selinux_exit();
return retval;
}