IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We had "SYSTEM MANAGER DIRECTIVES" which was a misnomer already, because
it also listed user manager stuff. Let's make this a more general section
and move the items for other services there too (from "MISCELANENOUS").
Strictly speaking, those are not environment variables, but they are compatible
and people think about them like this. Moving them makes them easier to find.
When there is bad link in the network the carrier goes up/down.
This makes networkd stops all the clients and drop config.
But if the remote router/dhcpserver running a prevention
of DHCP Starvation attack or DHCP Flood attack it does not allow
networkd to take a DHCP lease resulting failure in configuration.
This patch allows to keep the client running and keep the conf
also for this scenario.
Closes#9111
KillMode=mixed and control group are used to indicate that all
process should be killed off. SendSIGKILL is used for services
that require a clean shutdown. These are typically database
service where a SigKilled process would result in a lengthy
recovery and who's shutdown or startup time is quite variable
(so Timeout settings aren't of use).
Here we take these two factors and refuse to start a service if
there are existing processes within a control group. Databases,
while generally having some protection against multiple instances
running, lets not stress the rigor of these. Also ExecStartPre
parts of the service aren't as rigoriously written to protect
against against multiple use.
closes#8630
Instead of having just a single INITRD field, add support for all
additional parameters being INITRD fields in order.
Signed-off-by: Mike Auty <mike.auty@gmail.com>
@bl33pbl0p, please fix your editor
(Apparently you never configured the source tree? If you did, then the
git pre-commit hook would have been enabled which doesn't allow
commiting non-whitespace clean stuff...)
It's similar to sd_bus_flush_close_unref() but doesn't do the flushing.
This is useful since this will still discnnect the connection properly
but not synchronously wait for the peer to take our messages.
Primary usecase is within _cleanup_() expressions where synchronously
waiting on the peer is not OK.
This looks better and allows those terms to be indexed in systemd.directives.
In particular, <literal></literal> is dropped from around section names
([Match] and others) because the parens are distinctive enough on their own.
The same style is used in systemd.unit(5) and other pages that describe
sections.
If "keep" policy is specified, and the interface has a name that is
NET_NAME_USER or NET_NAME_RENAMED, we stop processing rules. "keep" should
probably be specified either first or last depending on the preference.
This partially reimplements 55b6530baa, in the
sense that if the "keep" policy is not specified, and if the interface has
a NamingPolicy, it will be renamed, even if it had a name previously.
So this breaks backwards compatibility in this case, but that's more in line
with what users expect.
Closes#9006.
Updating due to phrase "Defaults to DefaultTimeoutStartSec= from the manager configuration file, except when Type=oneshot is used, in which case the timeout is disabled by default (see systemd-system.conf)" from [0] https://github.com/systemd/systemd/blob/master/man/systemd.service.xml
Based on the journalctl documentation of this option added in 23ad99b519
(#10527), but with the first reference to “fields” replaced by “journal
messages”, since I think it’s less common to show other fields with
`systemctl status` (though it’s possible with the `-o` option).
Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab,
and possibly masking this condition if it should be enabled for auto gpt stuff,
just pull it in explicitly when required.
The current support in kernel-install for initrd images doesn't copy
over the initrd file or allow a means for it to be specified (it
requires a specific filename in a particular directory).
This patchset adds support for (optionally) providing the name of
initial ramdisk file to copied over and used by kernel-install.
From WordNet (r) 3.0 (2006) [wn]:
time-out
n 1: a brief suspension of play; "each team has two time-outs left"
From The Free On-line Dictionary of Computing (18 March 2015) [foldoc]:
timeout
A period of time after which an error condition is raised if
some event has not occured. A common example is sending a
message. If the receiver does not acknowledge the message
within some preset timeout period, a transmission error is
assumed to have occured.
RFC7766 section 4 states that in the absence of EDNS0, a response that
is too large for a 512-byte UDP packet will have the 'truncated' bit
set. The client is expected to retry the query over TCP.
Fixes#10264.
This is useful for distributions, where the stability of interface names should
be preseved after an upgrade of systemd. So when some specific release of the
distro is made available, systemd defaults to the latest & greatest naming
scheme, and subsequent updates set the same default. This default may still
be overriden through the kernel and env var options.
A special value "latest" is also allowed. Without a specific name, it is harder
to verride from meson. In case of 'combo' options, meson reads the default
during the initial configuration, and "remembers" this choice. When systemd is
updated, old build/ directories could keep the old default, which would be
annoying. Hence, "latest" is introduced to make it explicit, yet follow the
upstream. This is actually useful for the user too, because it may be used
as an override, without having to actually specify a version.
With this we can stabilize how naming works for network interfaces. A
user can request through a kernel cmdline option or an env var which
scheme to follow. The idea is that installers use this to set into stone
(a very soft stone though) the scheme used during installation so that
interface naming doesn't change afterwards anymore.
Why use env vars and kernel cmdline options, and not a config file of
its own?
Well, first of all there's no obvious existing one to use. But more
importantly: I have the feeling that this logic is kind of an incomplete
hack, and I simply don't want to do advertise this as a perfectly
working solution. So far we used env vars for the non-so-official
options and proper config files for the official stuff. Given how
incomplete this logic is (i.e. the big variable for naming remains the
kernel, which might expose sysfs attributes in newer versions that we
check for and didn't exist in older versions — and other problems like
this), I am simply not confident in giving this first-class exposure in
a primary configuration file.
Fixes: #10448
We would describe tmpfiles.d through what systemd-tmpfiles does with them, but
I think it's better to start with a geneneral statement what they are. Also,
let's make the description of volatile file systems less prominent.
Also, strenghten the advice to use RuntimeDirectory and mention
{Cache,Logs,Configuration,State}Directory=.
I think it is OK if some option is described as "similar to ..., but in
addition ...", as long as the "in addition" part is strictly additive this is
unambiguous. Otherwise, we'd have to repeat a lot of text, and then we'd
probably forget to adjust some of the descriptions when doing changes.
But when the "in addition" part is about replacing or removing parts of
functionality, it is better to avoid this pattern and describe the later option
from scratch.
Some paragraph breaks are added and minor changes made. UID/GID is changed to
user/group, since we generally expect user/group names to be used, not numeric
ids.
Fixes#11115.
This is convenient when working with device units in systemd. Instead of
converting the systemd unit name to a path to feed to udevadm, udevadm
info|trigger can be called directly on the unit name.
The man page is reworked a bit to describe the modern syntax with positional
arguments first. It's just simpler to use than the positional options.
When using networkd we currently have no way of ensuring that static
neighbor entries are set when our link comes up. This change adds a new
section to the network definition that allows multiple static neighbors
to be set on a link.
Patches are shown on github with a fixed width (no matter how wide the window
is). When line numbers are high (we have some files with 5 digit line numbers),
the diff does not fit, and horizontal scrolling must be used when viewing the
patch. This is super annoying. Let's reduce the width a bit. I think 109 is
still very wide, but at least the github issue should be alleviated.
The current use of literal + replaceable is pretty ugly as it usually
ends up with cgroup_disable= rendered in quotes, which looks really
weird, and this doesn't conform with others of a similar type (for
example, the earlier `DefaultDependencies=no` discussion in the same
file.
Some controllers (like the CPU controller) have a performance cost that
is non-trivial on certain workloads. While this can be mitigated and
improved to an extent, there will for some controllers always be some
overheads associated with the benefits gained from the controller.
Inside Facebook, the fix applied has been to disable the CPU controller
forcibly with `cgroup_disable=cpu` on the kernel command line.
This presents a problem: to disable or reenable the controller, a reboot
is required, but this is quite cumbersome and slow to do for many
thousands of machines, especially machines where disabling/enabling a
stateful service on a machine is a matter of several minutes.
Currently systemd provides some configuration knobs for these in the
form of `[Default]CPUAccounting`, `[Default]MemoryAccounting`, and the
like. The limitation of these is that Default*Accounting is overrideable
by individual services, of which any one could decide to reenable a
controller within the hierarchy at any point just by using a controller
feature implicitly (eg. `CPUWeight`), even if the use of that CPU
feature could just be opportunistic. Since many services are provided by
the distribution, or by upstream teams at a particular organisation,
it's not a sustainable solution to simply try to find and remove
offending directives from these units.
This commit presents a more direct solution -- a DisableControllers=
directive that forcibly disallows a controller from being enabled within
a subtree.
add new "systemd-run-generator" for running arbitrary commands from the kernel command line as system services using the "systemd.run=" kernel command line switch
Having systemctl disable/unmask remove all symlinks in /etc and /run is
unintuitive and breaks existing use cases.
systemctl should behave symmetrically.
A "systemctl --runtime unmask" should undo a "systemctl --runtime mask"
action.
Say you have a service, which was masked by the admin in /etc.
If you temporarily want to mask the execution of the service (say in a
script), you'd create a runtime mask via "systemctl --runtime mask".
It is is now no longer possible to undo this temporary mask without
nuking the admin changes, unless you start rm'ing files manually.
While it is useful to be able to remove all enablement/mask symlinks in
one go, this should be done via a separate command line switch, like
"systemctl --all unmask".
This reverts commit 4910b35078.
Fixes: #9393
Let's simplify things and drop the logic that /var/lib/machines is setup
as auto-growing btrfs loopback file /var/lib/machines.raw.
THis was done in order to make quota available for machine management,
but quite frankly never really worked properly, as we couldn't grow the
file system in sync with its use properly. Moreover philosophically it's
problematic overriding the admin's choice of file system like this.
Let's hence drop this, and simplify things. Deleting code is a good
feeling.
Now that regular file systems provide project quota we could probably
add per-machine quota support based on that, hence the btrfs quota
argument is not that interesting anymore (though btrfs quota is a bit
more powerful as it allows recursive quota, i.e. that the machine pool
gets an overall quota in addition to per-machine quota).
Fixes: #2728
This is also supposed to be preparation for doing #10234 eventually,
where a very similar operation is requested: instead of importing a tree
to /var/lib/machines it would need to be imported into
/var/lib/portables/.
I keep running "systemd-run -t /bin/bash" to quickly get a shell running
in service context. I suspect I am not the only one, hence let's add a
shortcut for it. While we are at it, let's make it smarter, and
automatically inherit the $SHELL of the invoking user as well as the
working directory, and let's imply --pty. --shell (or -S) is hence
equivalent to "-t -d $SHELL".
I find myself testing service management quite often with "systemd-run
-t /bin/bash". For that it is handy if the invoked shell would use the
working directory I am currently in. Hence introduce a shorthand for
that:
$ systemd-run -dt /bin/bash
This will automatically insert a WorkingDirectory= property into the
transient service, pointing to the working directory of the caller.
The way this is used drifted a bit from the original intent. Let's update
the description and add some examples to inspire people to texts that look
less bad during initial boot.
We now don't enable the CPU controller just for CPU accounting if we are
on 4.15+ and using pure unified hierarchy, as this is provided
externally to the CPU controller. This makes CPUAccounting=yes
essentially free, so enabling it by default when it's cheap seems like a
good idea.
We keep adding new features, let's advertise to the host OS what these
are in a new variable LoaderFeatures.
It works a bit like OsIndicationsSupported, but is about Loader
features.
This removes the ability to configure which cgroup controllers to mount
together. Instead, we'll now hardcode that "cpu" and "cpuacct" are
mounted together as well as "net_cls" and "net_prio".
The concept of mounting controllers together has no future as it does
not exist to cgroupsv2. Moreover, the current logic is systematically
broken, as revealed by the discussions in #10507. Also, we surveyed Red
Hat customers and couldn't find a single user of the concept (which
isn't particularly surprising, as it is broken...)
This reduced the (already way too complex) cgroup handling for us, since
we now know whenever we make a change to a cgroup for one controller to
which other controllers it applies.
The concept is redundant and predates the special chars that do the same
in ExecStar=. Let's settle on advertising just the latter, and hide
PermissionsStartOnly= from the docs (even if we continue supporting it).
Normally, we want to immediately quit on ^C. But when we are running under
less, people may set SYSTEMD_LESS without K, in which case they can use ^C to
communicate with less, and e.g. start and stop following input.
Fixes#6405.
Rebooting to set change the kernel command line to set some udev parameters is
inconvenient. Let's allow setting more stuff in the config file.
Also drop quotes from around "info" in udev.conf. We need to accept them for
compatibility, but there is no reason to use them.
In a way this is a follow-up for
a2d1fb882c, but adds a similar warning for
PIDFile=.
There's a much stronger case for doing this kind of notification in
tmpfiles.d (since it helps relating lines to each other for the purpose
of merging them). Doing this for PIDFile= is mostly about being
systematic and copying tmpfiles.d/ behaviour here.
While we are at it, let's also support relative filenames in PIDFile=
now, and prefix them with /run, to make them absolute.
Fixes: #10657
This adds a new pair of API calls sd_bus_set_close_on_exit() and
sd_bus_get_close_on_exit(). They control whether an sd_bus object
attached to a an sd-event loop shall automatically be flushed/closed
when the event loop goes down. Usually that's a good thing, except for
very few cases where the bus connection is longer living than the event
loop it is attached on. Specifically, this is the case for nspawn, where
we run the event loop only while the container is up, but afterwards
still want to be able to use the bus connection.
It's obsolete, stop mentioning it. Let's not confuse people suggests it
would be OK to use that, because it really isn't anymore, and it gives
us trouble with merging idenctical lines.
This reorganizes the systemd.timer man page so that it doesn't claim
there are no implicit dependencies right after specifying the implicit
dependencies, and so that it matches the other man pages for units. This
fixes a mistake introduced by commit aed5cb03db.
A simple copy+paste mistake, since the reference to
systemd-localed.service was added to both locale.conf(5) and
vconsole.conf(5) in the same commit (8968e36f21).
This changes the ProtectSystem= documentation to refer in more explicit
words to the restrictions of ReadOnlyPath=, as sugegsted in #9857.
THis also extends the paragraph in ReadOnlyPath= that explains the hole.
Fixes: #9857
In the documentation for ConditionXYZ= we claimed that AssertXYZ= would
have an effect on unit state (which is wrong), while at the
documentation for AssertXYZ= we said it only has an effect on the job,
but not the unit (which is right). Let's fix this contradiction, and
only claim the latter.
Also, fix a couple of other things (for example, stop talking about a
"failure state", but let's just expressly called it "the 'failed' state",
as that's the actual name of that state.
Finally, let's emphasize again when the conditions/assertions are
executed, and that they hence are not useful to conditionalize deps.
Fixes: #10433
In the default journalctl output, unprintable entries are abbreviated as
“[<amount> blob data]”; using the same term in the documentation helps
users to quickly discover the option they need to add in order to see
those entries.
The &MEMORY_ACCOUNTING_DEFAULT; resolves to "yes" or "no" while the rest
of the paragraph talked about "on" and "off". Let's adjust this and
stick to "yes" and "no"...
Quite frankly I think it's not a particularly good idea to change the
docs based configuration changes... THis can only be incomplete, and the
wording is still very awkward since we repeat the same sentence twice.
This is useful for a couple of cases, I'm mostly interested in case #1:
1. Verifying "reasonable" values in a trivially scriptable way
2. Debugging unexpected time span parsing directly
Test Plan:
```
% build/systemd-analyze timespan 20
Original: 20
μs: 20
Human: 20us
% build/systemd-analyze timespan 20ms
Original: 20ms
μs: 20000
Human: 20ms
% build/systemd-analyze timespan 20z
Failed to parse time span '20z': Invalid argument
```
Add LogRateLimitIntervalSec= and LogRateLimitBurst= options for
services. If provided, these values get passed to the journald
client context, and those values are used in the rate limiting
function in the journal over the the journald.conf values.
Part of #10230
C.f. 287419c119: 'systemctl exit 42' can be
used to set an exit value and pulls in exit.target, which pulls in systemd-exit.service,
which calls org.fdo.Manager.Exit, which calls method_exit(), which sets the objective
to MANAGER_EXIT. Allow the same to happen through SuccessAction=exit.
v2: update for 'exit' and 'exit-force'
We would accept e.g. FailureAction=reboot-force in user units and then do an
exit in the user manager. Let's be stricter, and define "exit"/"exit-force" as
the only supported actions in user units.
v2:
- rename 'exit' to 'exit-force' and add new 'exit'
- add test for the parsing function
FailureAction=/SuccessAction= were added later then StartLimitAction=, so it
was easiest to refer to the existing description. But those two settings are
somewhat simpler (they just execute the action unconditionally) while
StartLimitAction= has additional timing and burst parameters, and they are
about to take on a more prominent role, so let's move the description of
allowed values.
The term “positive” is often read to exclude 0 (though “strictly
positive” is sometimes used to clarify this), so let’s explicitly state
that --lines=0 is legal and completely disables journal output.
Motivated by an answer on StackExchange [1].
[1]: https://unix.stackexchange.com/a/475068/44049