IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This function should be used when filling in "struct pollfd"'s .events
field for watching the journal. It will always return POLLIN for now,
but we should keep our options open to change this later on.
This mimics libsystemd-bus' sd_bus_get_events() call with the same
purpose.
This makes it easier to add substitutions to man pages,
avoiding the separate transformation step.
mkdir -p's are removed from the rule, because xsltproc will
will create directories on it's own.
All in all, two or three forks per man page are avoided,
which should make things marginally faster.
Unfortunately python parsers must too be tweaked to handle
entities. This isn't particularly easy: with lxml a custom
Resolver can be used, but the stdlib etree doesn't support
external entities *at all*. So when running without lxml,
the entities are just removed. Right now it doesn't matter,
since the entities are not indexed anyway. But I intend to
add indexing of filenames in the near future, and then the
index generated without lxml might be missing a few lines.
Oh well.
The rules governing %s where just too complicated. First of
all, looking at $SHELL is dangerous. For systemd --system,
it usually wouldn't be set. But it could be set if the admin
first started a debug shell, let's say /sbin/sash, and then
launched systemd from it. This shouldn't influence how daemons
are started later on, so is better ignored. Similar reasoning
holds for session mode. Some shells set $SHELL, while other
set it only when it wasn't set previously (e.g. zsh). This
results in fragility that is better avoided by ignoring $SHELL
totally.
With $SHELL out of the way, simplify things by saying that
%s==/bin/sh for root, and the configured shell otherwise.
get_shell() is the only caller, so it can be inlined.
Fixes one issue seen with 'make check'.
This introduces remote-fs-setup.target independently of
remote-fs-pre.target. The former is only for pulling things in, the
latter only for ordering.
The new semantics:
remote-fs-setup.target: is pulled in automatically by all remote mounts.
Shall be used to pull in other units that want to run when at least one
remote mount is set up. Is not ordered against the actual mount units,
in order to allow activation of its dependencies even 'a posteriori',
i.e. when a mount is established outside of systemd and is only picked
up by it.
remote-fs-pre.target: needs to be pulled in automatically by the
implementing service, is otherwise not part of the initial transaction.
This is ordered before all remote mount units.
A service that wants to be pulled in and run before all remote mounts
should hence have:
a) WantedBy=remote-fs-setup.target -- so that it is pulled in
b) Wants=remote-fs-pre.target + Before=remote-fs-pre.target -- so that
it is ordered before the mount point, normally.
Add option to force journal sync with fsync. Default timeout is 5min.
Interval configured via SyncIntervalSec option at journal.conf. Synced
journal files will be marked as OFFLINE.
Manual sync can be performed via sending SIGUSR1.
Previously, it would set all caps, but it should drop them all, anything
else makes little sense.
Also, document that this works as it does, and what to do in order to
assign all caps to the bounding set.
https://bugzilla.redhat.com/show_bug.cgi?id=914705
Seems natural to be able to specify relative directory,
e.g. with journalctl -D. And even if, this should be checked
in front-end code, not in the library.
The properties will still be set in the udev database, but they will not be used
for setting the interface names. As for the other kernel commandline switches,
we allow it to be prefixed by 'rd.' to only apply in the initrd.
All Execs within the service, will get mounted the same
/tmp and /var/tmp directories, if service is configured with
PrivateTmp=yes. Temporary directories are cleaned up by service
itself in addition to systemd-tmpfiles. Directory which is mounted
as inaccessible is created at runtime in /run/systemd.
I need this to test half-installed socket-activated python
script, which requires PYTHONPATH and LD_LIBRARY_PATH set.
I assume that other people might find it useful to.
-E VAR passes through VAR from the environment, while
-E VAR=value sets VAR=value.
systemd-activate -E PYTHONPATH=/var/tmp/inst1/usr/lib64/python3.3/site-packages -E LD_LIBRARY_PATH=/var/tmp/inst1/usr/lib -l 2000 python3 -c 'from systemd.daemon import listen_fds; print(listen_fds())'
Previously we were testing whether /sys/fs/cgroup/systemd/ was a mount
point. This might be problematic however, when the cgroup trees are bind
mounted into a container from the host (which should be absolutely
valid), which might create the impression that the container was running
systemd, but only the host actually is.
Replace this by a check for the existance of the directory
/run/systemd/system/, which should work unconditionally, since /run can
never be a bind mount but *must* be a tmpfs on systemd systems, which is
flushed at boots. This means that data in /run always reflects
information about the current boot, and only of the local container,
which makes it the perfect choice for a check like this.
(As side effect this is nice to Ubuntu people who now use logind with
the systemd cgroup hierarchy, where the old sd_booted() check misdetects
systemd, even though they still run legacy Upstart.)
First, rename root-fs.target to initrd-root-fs.target to clarify its usage.
Mount units with "x-initrd-rootfs.mount" are now ordered before
initrd-root-fs.target. As we sometimes construct /sysroot mounts in
/etc/fstab in the initrd, we want these to be mounted before the
initrd-root-fs.target is active.
initrd.target can be the default target in the initrd.
(normal startup)
:
:
v
basic.target
|
______________________/|
/ |
| sysroot.mount
| |
| v
| initrd-root-fs.target
| |
| v
| initrd-parse-etc.service
(custom initrd services) |
| v
| (sysroot-usr.mount and
| various mounts marked
| with fstab option
| x-initrd.mount)
| |
| v
| initrd-fs.target
| |
\______________________ |
\|
v
initrd.target
|
v
initrd-cleanup.service
isolates to
initrd-switch-root.target
|
v
______________________/|
/ |
| initrd-udevadm-cleanup-db.service
| |
(custom initrd services) |
| |
\______________________ |
\|
v
initrd-switch-root.target
|
v
initrd-switch-root.service
|
v
switch-root
journalctl -u unit is not very useful, because it doesn't show
systemd messages about starting, stopping, coredumps, etc,
like systemctl status unit does. Make it show the same
information using the same rules.
If somebody really want to see just messages from by the unit,
it is easy enough to use _SYSTEMD_UNIT=...
Instead of using local-fs*.target in the initrd, use root-fs.target for
sysroot.mount and initrd-fs.target for /sysroot/usr and friends.
Using local-fs.target would mean to carry over the activated
local-fs.target to the isolated initrd-switch-root.target and thus in
the real root. Having local-fs.target already active after
deserialization causes ordering problems with the real root services and
targets.
We better isolate to targets for initrd-switch-root.target, which are
only available in the initrd.
The documentation makes it sound like ExecStopPost is only run when
stopping the service with `systemctl stop foo.service`
However, that is not the case, as it also gets run when the service
unexpectedly exists, crashes, or gets SIGKILLed.
This should help readers of the man or HTML pages know if the documentation
is out of date. An alternative to use a date generated from 'git log' was
considered, but since we try to keep user visible documentation up to date,
showing the project version should be enough.
Since the HTML files are in different directories during build
and on fd.o, links are broken in the build directory. This could
be fixed by moving stuff around, or by modifying the files during
upload, but I think that people do not usually create HTML files
for local browsing, and this is not necessary.
Previously all journal files were owned by "adm". In order to allow
specific users to read the journal files without granting it access to
the full "adm" powers, introduce a new specific group for this.
"systemd-journal" has to be created by the packaging scripts manually at
installation time. It's a good idea to assign a static UID/GID to this
group, since /var/log/journal might be shared across machines via NFS.
This commit also grants read access to the journal files by default to
members of the "wheel" and "adm" groups via file system ACLs, since
these "almost-root" groups should be able to see what's going on on the
system. These ACLs are created by "make install". Packagers probably
need to duplicate this logic in their postinst scripts.
This also adds documentation how to grant access to the journal to
additional users or groups via fs ACLs.
Errors because of oom conditions or descriptor exhaustion should not
be ignored. We probably cannot recover from those conditions.
Current behaviour wrt. insufficient permissions is described in the
man page. It might make sense in case of user sessions, so I left
it as is.
* python-systemd-reader:
python-systemd: rename Journal to Reader
build-sys: upload python documentation to freedesktop.org
systemd-python: add Journal class for reading journal
python: build html docs using sphinx
journalct: also print Python code in --new-id
python: utilize uuid.UUID in logging
python: add systemd.id128 module
... and 34 other commits
In short: python module systemd.id128 is added, and existing
systemd.journal gains a new class systemd.journal.Reader, which can be
used to iterate over journal entries. Documentation is provided, and
accessible under e.g.
pydoc3 systemd.journal.Reader
or
firefox http://www.freedesktop.org/software/systemd/man/python-systemd/
This reverts commit cb96a2c69a.
It is not a mistake to pass args when -b is specified. They will simply
be passed on to the container's init.
The manpage needs fixing, that's true.
Occasionally people report problem with reboot/poweroff operations hanging in
the middle. One known cause is when a new transaction to start a unit is
enqueued while the shutdown is going on. The start of the unit conflicts with
the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant,
becase getty and sshd may already be stopped.
Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions.
This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should
someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
Add a new job mode: replace-irreversibly. Jobs enqueued using this mode
cannot be implicitly canceled by later enqueued conflicting jobs.
They can however still be canceled with an explicit "systemctl cancel"
call.
"systemctl default" should behave identically to "telinit N" (where N is the
corresponding runlevel target number), therefore it should use isolate job mode
too.
In systemd-bootchart, the disk model information will not be found
unless the root device is specified using `root=/dev/sdxY` on the kernel
line. Just add a note as to why this doesn't happen.
Turning off filtering with --filter is just too confusing.
Config option "Filter" doesn't have to be changed, here
"Filter=yes" already meant to filter.
This makes 'status' behave like 'list-units':
systemctl status -> status of all units
systemctl -t error status -> status of error units
systemctl -t mount status -> etc.
Essentially transfer the 'README' file in src/bootchart to the man page
for easier reading by users.
Moved the 'History' section to the bottom, before the 'See Also' section.
man/systemd-bootchart.xml | 100 ++++++++++++++++++++++++++++++++++++++--------
1 file changed, 83 insertions(+), 17 deletions(-)
systemd-nspawn will now print the PID of the child.
An example showing how to enter the container is added
to the man page.
Support for nsenter without an explicit command was
added in https://github.com/karelzak/util-linux/commit/5758069
(post v2.22.2). So this example requires both a new kernel
and the latest util-linux.
Option listings seemed to be pretty much random, some were short opt,
long opt, others were long opt, short opt. This just makes every option
with a short and long opt that I could find in the order short opt, long
opt, for formatting's sake.
This unifies much of the logic behind them:
- All four will now ofllow the rule that the earlier file and earlier
assignment in the .d/ directories wins. Before, sysctl was the only
outlier, where the later setting always won.
- All four now support getopt() and --help on the command line.
- All four can now handle specification of configuration file names on
the command line to apply. The tools will automatically find them, and
apply them. Previously only tmpfiles could do that. This is useful for
%post scripts in RPMs and suchlike.
- This fixes various error path issues in conf_files_list()
In other cases where multiple directories are searched for unit files,
the list of directories is described in the man page describing the
format. I think this makes sense too in case of systemd directories,
since the systemd(1) manpage already has an overview of many different
topics.
man rules were repeating the same information in too many places,
which was error prone. Those rules can be easily generated from .xml
files. For efficiency and because python is not a required dependency,
Makefile-man.am is only regenerated when requested with
make update-man-list
If no metadata in man/*.xml changed, this file should not change. So
only when a new man page or a new alias is added, this file should
show up in 'git diff'. The change should then be committed.
If the support for building from git without python was dropped, we
could drop Makefile-man.am from version control. This would also
increase the partial build time (since more stuff would be rebuild
whenever sources in man/*.xml would be modified), so it would probably
wouldn't be worth it.
Mukund Sivaraman pointed out that cryptsetup(5) mentions the "read-only"
option, while the code understands "readonly".
We could just fix the manpage, but for consistency in naming of
multi-word options it would be prettier to have "read-only". So let's
accept both spellings.
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=903463
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
Archlinux has a similar tool to debbotstrap in the arch-install-scripts
package that will install to a specified directory. This is generally
used for installation, so the -d flag must be passed to tell it to
install to a non-mountpoint directory.
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
Type X will exclude path itself from clean-up. However, if the path is a
directory systemd-tmpfiles will clean-up its content.
In contrast to type x, where path is ignored completely, type X needs some
Age parameter. In order to determine Age parameter, we will look for config
entries of type d or D and pick the best match. Best match is either
exact match or longest prefix match.
Hi all,
while working on another bug, I discovered the "strange" way systemd is
parsing Environment= in .service and thought it was worth documenting
(because I don't expect people to find this syntax by themselves unless
they read the parsing code ;)
Be more verbose about using space in Environment field and not
using value of other variables
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=840260
[zj: expand and reformat the example a bit]
Due to the brokeness of much of the userspace audit code we cannot
really start too many systems without the audit caps set. To make nspawn
easier to use just add the audit caps by default.
To boot up containers successfully the kernel's auditing needs to be
turned off still (use "audit=0" on the kernel command line), but at
least no manual caps have to be passed anymore.
In the long run auditing will be fixed for containers and ve virtualized
properly at which time it should be safe to enable these caps anyway.
Variable definitions can be written on more than one line - if each ends
with a backslash, then is concatenated with a previous one. Only
backslash and unix end of line (\n) are treated as a continuation.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58083
[zj: squashed two patches together; cleaned up grammar; removed
comment about ignoring trailing backslash -- it is not ignored.]
Document continuation support in systemd.exec
systemctl list-dependencies lists all unit's dependecies and
recursively expands all subsidiary target units into a tree.
Primary purpose for this command is to show all units which are
enabled in specified target.
We no longer allow early-boot init scripts, however in late boot the
syslog socket and local mounts are established anyway, so let's simplify
our dep graph a bit.
If $syslog doesn't resolve to syslog.target anymore there's no reason to
keep syslog.target around anymore. Let's remove it.
Note that many 3rd party service unit files order themselves after
syslog.target. These will be dangling dependencies now, which should be
unproblematic, however.
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
Systemd should not introduce any new facilities. Distributions which still
need to support their non-standard/legacy facilities should add them as
patches to their packaging.
The following facilities are no longer recognized:
$x-display-manager
$mail-transfer-agent
$mail-transport-agent
$mail-transfer-agent
$smtp
$null
This target is no longer available:
mail-transfer-agent.target
This way we also get a man page. The output is not as polished.
I hope that it doesn't matter too much.
index.html is not generated now, the page is called
systemd.index.html. If necessary, an install hook should be added.
For all unit files foobar.service we will now read
foobar.service.d/*.conf, too. This may be used to override certain unit
settings without having to edit unit files directly.
This makes it really easy to change specific settings for services
without having to edit any unit file:
mkdir /etc/systemd/system/avahi-daemon.service.d/
echo -e '[Service]\nNice=99' > /etc/systemd/system/avahi-daemon.service.d/nice.conf
systemctl daemon-reload
Bootchart is renamed to 'systemd-bootchart' and installed as
/usr/lib/systemd/systemd-bootchart. The configuration file
will reside in /etc/systemd/bootchart.conf.
Adds is-failed to join is-active and is-enabled.
I grabbed this one from the todo list. Most of the functionality was
already there for is-active. I just needed to make check_one_unit take
the states to check for as an argument instead of the hardcoded
"active" and "reloading".
is-failed will return 1 if none of the units given are failed. This is
different from is-active which will return 3 if none of the units
given are active. It returns 3 with this comment:
/* According to LSB: "program is not running" */
As that does not make sense when looking for failed units I simply
chose 1 instead.
For many usecases it is useful to store the chassis type somewhere, and
/etc/machine-info sounds like a good place. Ideally we could always
detect the chassis type from firmware, but frequently that's not
available and in many embedded devices probably entirely unrealistic.
This patch adds a configurable setting CHASSIS= to /etc/machine-info and
exposes this via hostnamectl/hostnamed. hostnamed will guess the chassis
type from DMI if nothing is set explicitly. I also added support for
detecting it from ACPI, which should be more useful as ACPI 5.0 actually
knows a "tablet" chassis type, which neither DMI nor previous ACPI
versions knew.
This also enables DMI-based and ACPI-based detection for non-x86 systems
as ACPI is apparently coming to ARM platforms soon.
I tried to minimize the vocabulary of chassis types understood and
added: desktop, laptop, server, tablet, handset. This is much less than
either APCI or DMI know. If we need more types later on we can easily
add them.
This saves test output to individual .log files.
The driver is only used in /Makefile.am, not in
/docs/*udev/Makefile.am because the latter don't seem to work with
this driver. They don't produce much output anyway.
.gitignore is alphabetized, and .log files are added to it.
Generated files from /build-aux are removed from the list.
This introduces a new data threshold setting for sd_journal objects
which controls the maximum size of objects to decompress. This is
relieves the library from having to decompress full data objects even
if a client program is only interested in the initial part of them.
This speeds up "systemd-coredumpctl" drastically when invoked without
parameters.
Sometimes it is better to see messages in full, and the existing
set of options didn't allow this easily. E.g. now
journalctl -f --full
will behave like
tail -f /var/log/messages
of yore.
Long option only for now, since small letters are becoming
scarce, and this doesn't feel like a capital-letter-option.
'-u' would be nice, and the above command would be spelled
journalctl -fu
> Kay:
udev is early boot without /var. /var is entirely taboo for udev.
This partially reverts commit ee623f0d0c
(moving hwdb.bin is reverted, but the uninstall hook and cosmetic
changes remain).
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
Since we already allow defining the mode of AF_UNIX sockets and FIFO, it
makes sense to also allow specific user/group ownership of the socket
file for restricting access.
This was premarily intended to support the LSB facility $httpd which is
only known by Fedora, and a bad idea since it lacks any real-life
usecase.
Similar, drop support for some other old Fedora-specific facilities.
Also, document the rules for introduction of new facilities, to clarify
the situation for the future.
This adds SMACK label configuration options to socket units.
SMACK labels should be applied to most objects on disk well before
execution time, but two items remain that are generated dynamically
at run time that require SMACK labels to be set in order to enforce
MAC on all objects.
Files on disk can be labelled using package management.
For device nodes, simple udev rules are sufficient to add SMACK labels
at boot/insertion time.
Sockets can be created at run time and systemd does just that for
several services. In order to protect FIFO's and UNIX domain sockets,
we must instruct systemd to apply SMACK labels at runtime.
This patch adds the following options:
Smack - applicable to FIFO's.
SmackIpIn/SmackIpOut - applicable to sockets.
No external dependencies are required to support SMACK, as setting
the labels is done using fsetxattr(). The labels can be set on a
kernel that does not have SMACK enabled either, so there is no need
to #ifdef any of this code out.
For more information about SMACK, please see Documentation/Smack.txt
in the kernel source code.
v3 of this patch changes the config options to be CamelCased.
