IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In normal operation this would trigger an assertion
when a DHCP server is configured every time the link goes up.
This change makes sd_dhcp_server_configure_pool idempotent
and stops the DHCP server when the link loses carrier.
In addition to this stopping the assertion being triggered,
this has the useful side-effect of allowing the link to be taken down
and then brought back up as a way to have it use DNS from an "upstream"
interface that got its DNS configuration via DHCP
after the downstream link was configured.
For containers the link is effectively always up,
but for virtual and physical machines networkd may have started
before the link has gained carrier.
Networkd will configure addresses when carrier is gained,
but should also configure addresses if the link is already up.
Without this patch the addresses are set unconditionally.
Normally this isn't a problem since addresses are either fixed,
set over DHCP, or is never without carrier.
But for machines that gain carrier and are configured to select
an address from the unallocated local address pool
this causes them to pick an address from the pool twice.
This change to skip address configuration when a link is added
before it has a carrier fixes having multiple addresses assigned
if the machine starts networkd before it has gained carrier
and is configured with an address from the pool.
When the link comes up it assigns addresses
by checking whether the address is 0.0.0.0,
and if so pulling a new address range out of the pool.
If the addresses aren't removed from the pool when the link goes down
then the set of addresses allocated will grow
until all the local address ranges are exhausted,
while it gets a different IP address every time.
This patch frees the addresses when link config is dropped
to fix the address leak,
and on systems which can expect all interfaces to be brought up or down
in a deterministic order this conveniently makes use the same address each time.
This patch ensures that session devices are saved for each session.
In order to make the revokation logic work when logind is restarted, the
session devices are now saved in the session state files and their respective
file descriptors sent to PID1's fdstore in order to keep them open accross
restart.
This is mandatory in order to keep the revokation logic working. Indeed in case
of input-devices, the same file descriptors must be shared by logind and a
given session controller in order EVIOCREVOKE to work otherwise multiple
sessions can have device access in parallel.
This should be the only remaining and missing piece for making logind fully
restartable.
Fixes: #1163
When assigning a new session controller to a session, the VT is prepared so the
controller can expect the VT to be in a good default state.
However when logind is restarted and a session controller already took control
of a session, there's no need to prepare th VT otherwise logind may screw up
the VT state set by the controller.
This patch prevents the preparation of the VT in this case.
'n_fds' field in the ExecParameters structure was counting the total number of
file descriptors to be passed to a unit.
This counter also includes the number of passed socket fds which is counted by
'n_socket_fds' already.
This patch removes that redundancy by replacing 'n_fds' with
'n_storage_fds'. The new field only counts the fds passed via the storage store
mechanism. That way each fd is counted at one place only.
Subsequently the patch makes sure to fix code that used 'n_fds' and also wanted
to iterate through all of them by explicitly adding 'n_socket_fds' + 'n_storage_fds'.
Suggested by Lennart.
"-c", which is short for "--no-canonicalize", tells /bin/umount
that the path name is canonical (no .. or symlinks etc).
systemd always uses a canonical name, so this flag is appropriate
for systemd to use.
Knowing that the path is canonical allows umount to avoid
some calls to lstat() on the path.
From v2.30 "-c" goes further and causes umount to avoid all
attempts to 'lstat()' (or similar) the path. This is important
when automatically unmounting a filesystem, as lstat() can
hang indefinitely in some cases such as when an NFS server
is not accessible.
"-c" has been supported since util-linux 2.17 which is before the
earliest version supported by systemd.
So "-c" is safe to use now, and once util-linux v2.30 is in use,
it will allow mounts from non-responsive NFS servers to be
unmounted.
This prevents udev from double-freeing and crashing.
See https://github.com/systemd/systemd/issues/6040#issuecomment-306589836
==351== Invalid free() / delete / delete[] / realloc()
==351== at 0x4C2C14B: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==351== by 0x13CBE8: hashmap_clear_free_free (hashmap.c:900)
==351== by 0x13CBE8: hashmap_free_free_free (hashmap.c:852)
==351== by 0x147F4F: sd_device_unref (sd-device.c:88)
==351== by 0x130CCC: udev_device_unref (libudev-device.c:552)
==351== by 0x130CD5: udev_device_unref (libudev-device.c:553)
==351== by 0x11FBBB: worker_spawn (udevd.c:488)
==351== by 0x1216E5: event_run (udevd.c:584)
==351== by 0x1216E5: event_queue_start (udevd.c:823)
==351== by 0x122213: on_uevent (udevd.c:927)
==351== by 0x141F2F: source_dispatch (sd-event.c:2272)
==351== by 0x142D52: sd_event_dispatch (sd-event.c:2631)
==351== by 0x142D52: sd_event_run (sd-event.c:2690)
==351== by 0x142D52: sd_event_loop (sd-event.c:2710)
==351== by 0x1159CB: run (udevd.c:1643)
==351== by 0x1159CB: main (udevd.c:1772)
==351== Address 0x81745b0 is 0 bytes inside a block of size 1 free'd
==351== at 0x4C2C14B: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==351== by 0x1447F0: freep (alloc-util.h:57)
==351== by 0x1447F0: sd_device_set_sysattr_value (sd-device.c:1859)
==351== by 0x132081: udev_device_set_sysattr_value (libudev-device.c:849)
==351== by 0x12E777: set_trackpoint_sensitivity (udev-builtin-keyboard.c:180)
==351== by 0x12E777: builtin_keyboard.lto_priv.170 (udev-builtin-keyboard.c:263)
==351== by 0x14D03F: udev_builtin_run.constprop.75 (udev-builtin.c:133)
==351== by 0x11FAEB: udev_event_execute_run (udev-event.c:957)
==351== by 0x11FAEB: worker_spawn (udevd.c:461)
==351== by 0x1216E5: event_run (udevd.c:584)
==351== by 0x1216E5: event_queue_start (udevd.c:823)
==351== by 0x122213: on_uevent (udevd.c:927)
==351== by 0x141F2F: source_dispatch (sd-event.c:2272)
==351== by 0x142D52: sd_event_dispatch (sd-event.c:2631)
==351== by 0x142D52: sd_event_run (sd-event.c:2690)
==351== by 0x142D52: sd_event_loop (sd-event.c:2710)
==351== by 0x1159CB: run (udevd.c:1643)
==351== by 0x1159CB: main (udevd.c:1772)
==351== Block was alloc'd at
==351== at 0x4C2CF35: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==351== by 0x144853: sd_device_set_sysattr_value (sd-device.c:1888)
==351== by 0x132081: udev_device_set_sysattr_value (libudev-device.c:849)
==351== by 0x12E777: set_trackpoint_sensitivity (udev-builtin-keyboard.c:180)
==351== by 0x12E777: builtin_keyboard.lto_priv.170 (udev-builtin-keyboard.c:263)
==351== by 0x14D03F: udev_builtin_run.constprop.75 (udev-builtin.c:133)
==351== by 0x11FAEB: udev_event_execute_run (udev-event.c:957)
==351== by 0x11FAEB: worker_spawn (udevd.c:461)
==351== by 0x1216E5: event_run (udevd.c:584)
==351== by 0x1216E5: event_queue_start (udevd.c:823)
==351== by 0x122213: on_uevent (udevd.c:927)
==351== by 0x141F2F: source_dispatch (sd-event.c:2272)
==351== by 0x142D52: sd_event_dispatch (sd-event.c:2631)
==351== by 0x142D52: sd_event_run (sd-event.c:2690)
==351== by 0x142D52: sd_event_loop (sd-event.c:2710)
==351== by 0x1159CB: run (udevd.c:1643)
==351== by 0x1159CB: main (udevd.c:1772)
Make sure to only apply the O_NONBLOCK flag to the fds passed via socket
activation.
Previously the flag was also applied to the fds which came from the fd store
but this was incorrect since services, after being restarted, expect that these
passed fds have their flags unchanged and can be reused as before.
The documentation was a bit unclear about this so clarify it.
This adds /sys/firmware lookup for sysname when creating a new device,
which allows device-tree properties lookup. This look-up can then be
used in udev rules, allowing device-tree-based model detection.
The code is mostly correct, but gcc is trying to outsmart us, and emits a
warning for a "llu vs lu" mismatch, even though they are the same size (on alpha):
src/libsystemd/sd-bus/bus-control.c: In function ‘kernel_get_list’:
src/libsystemd/sd-bus/bus-control.c:267:42: error: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64 {aka long unsigned int}’ [-Werror=format=]
if (asprintf(&n, ":1.%llu", name->id) < 0) {
^
src/libsystemd/sd-bus/bus-control.c: In function ‘bus_get_name_creds_kdbus’:
src/libsystemd/sd-bus/bus-control.c:714:47: error: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64 {aka long unsigned int}’ [-Werror=format=]
if (asprintf(&c->unique_name, ":1.%llu", conn_info->id) < 0) {
^
This is hard to work around properly, because kdbus.h uses __u64 which is
defined-differently-despite-being-the-same-size then uint64_t. Thus the simple
solution of using %PRIu64 fails on amd64:
src/libsystemd/sd-bus/bus-control.c:714:47: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘__u64 {aka long long unsigned int}’ [-Werror=format=]
if (asprintf(&c->unique_name, ":1.%"PRIu64, conn_info->id) < 0) {
^~~~~~
Let's just avoid the whole issue for now by silencing the warning.
After the next release, we should just get rid of the kdbus code.
Fixes#5561.
Instead of always letting logind guess what the caller's session is, let's
give it the value from $XDG_SESSION_ID when it is present in the caller's
environment.
Nowadays terminal emulators are often running as services under systemd --user,
and not as part of an actual session, so all loginctl calls which depend on
logind guessing the session will fail. I don't see a reason not to honour
$XDG_SESSION_ID.
This applies to LockSession, UnlockSession, TerminateSession, ActivateSession,
SetUserLinger.
Fixes#6032.
Other functions in sd-login generally allow the output parameter to be NULL, in
which case only the number of items that would be stored in the array is returned.
Be nice and do the same here.
C.f. 0543105b0f.
This makes if /run/systemd/{seats,sessions,users} are missing, then
sd_get_seats(), sd_get_sessions() and sd_get_uids() return 0, that is,
an empty list, instead of -ENOENT.
This fixes commit 5e354b2252 which was an attempt to avoid installation
of tmpfiles.d/systemd-remote.conf when it was not needed (ie HAVE_REMOTE=false).
Before this fix and with the autotool build, systemd-remote.conf was
distributed and also installed (although it was empty) even though
HAVE_REMOTE=false.
That's what happens when doing last second changes without retesting...
While at it, update tmpfiles.d/.gitignore (var.conf was missing as well
since commit a083537e5d).
$ reboot -f
Failed to read reboot parameter file: No such file or directory
It seems that the warning on ENOENT was inadvertently introduced in
27c06cb516.
The warning reported in #5646 comes from systemctl, but let's fix the other
call site in the same way too.
Fixes#5646.
The TAGS file was generated in build/ following what autotools did.
Nevertheless, it's more convenient to put in the source dir.
(It doesn't get deleted by mistake, and it's easier to find for the
editor.)
The -ENOMEDIUM return value was introduced in v232-1001-g2977724b09,
('core: make hybrid cgroup unified mode keep compat /sys/fs/cgroup/systemd hierarchy'),
and would be returned by cg_pid_get_path_shifted(), but the documented and
expected return value is -ENODATA. Let's just catch ENXIO/ENOMEDIUM and translate
it to ENODATA in all cases.
Complements 171f8f591f, fixes#6012.
They require a writable /tmp dir (in the bash implementation).
Let's use echo, and not 'echo -e' since that doesn't seem to be completely
portable.
Fixes#6052.
Some .install plugins does not require that machine ID is set such as
20-grubby.install for Fedora and 50-depmod.install.
To support such plugins to run without valid machine-id, this commit
makes the following change:
* if /etc/machine-id is missing or empty, create temporary directory
and set its path to BOOT_DIR_ABS,
* run the .install helpers with KERNEL_INSTALL_MACHINE_ID environment
variable that'd be empty if /etc/machine-id is missing or empty.
This may be useful for installing kernel for e.g. stateless systems
which initialize machine-id while booting the systems.
Formatting sd-cards does not trigger "change" uevents. As a result clients
using udev API don't get any updates afterwards and get outdated information
about the device.
Include mmcblk* in a match for watch option assignment.
