IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The intent of the hwdb entry for the Cube iWork8 air tablet buttons is
to fix them being swapped. The kernel is using left-meta for the
home key (it is being treated as the windows key on keyboards, as it has
a windows logo on most x86 tablets).
Fix the hwdb entry to only swap the buttons and not change the keycode
emitted by the home key.
timex::time::tv_sec can have different sizes depending on the
host architecture. On x32 in particular, it is 8 bytes
long while the long int type is only 4 bytes long. Hence,
using li as a format specifier will trigger a format
error. Thus, better use PRI_TIME instead of li which is
actually the right format specifier to use for time_t.
Enable masking the /proc folder using the 'InaccessiblePaths' unit
option.
This also slightly simplify mounts setup as the bind_remount_recursive
function will only open /proc/self/mountinfo once.
This is based on the suggestion at:
https://lists.freedesktop.org/archives/systemd-devel/2017-April/038634.html
timex::time::tv_usec and timex::freq can have different sizes
depending on the host architecture. On x32 in particular,
it is 8 bytes long while the long int type is only 4 bytes
long. Hence, using li as a format specifier will trigger
a format error. Thus, introduce a new format specifier
PRI_TIMEX which is defined as PRIi64 on x32 and li
everywhere else.
timespec::tv_nsec can have different sizes depending on the
host architecture. On x32 in particular, it is 8 bytes long
while the long int type is only 4 bytes long. Hence, using
ld as a format specifier will trigger a format error. Thus,
explicitly cast timespec::tv_nsec to nsec_t and use PRI_NSEC
as the format specifier to make sure the sizes for both match.
timespec::tv_nsec can have different sizes depending on the
host architecture. On x32 in particular, it is 8 bytes long
while the long int type is only 4 bytes long. Hence, using
ld as a format specifier will trigger a format error. Thus,
explicitly cast timespec::tv_nsec to nsec_t and use PRI_NSEC
as the format specifier to make sure the sizes for both match.
When we first handle a device with an EVDEV_ABS override, check if it has
EV_ABS bits. If not, print a warning and continue. This is required on devices
where the match string applies to multiple device nodes, not all of which may
have absolute axes.
Fixes https://github.com/systemd/systemd/issues/5079
c20e6de897 introduced a format string as
variable, but didn't turn off -Wformat-nonliteral warnings on it, thus
breaking the build. Let's fix that, by simply turning off the warning in
this case, as we know it's safe.
test-login.c is largely rewritten to use _cleanup_ and give more meaningful
messages (function names are used instead of creative terms like "active
session", so that when something unexpected is returned, it's much easier to
see what function is responsible).
The monitoring part is only activated if '-m' is passed on the command line.
It runs against the information from /run/systemd/ in the live system, but that
should be OK: logind/sd-login interface is supposed to be stable and both
backwards and forwards compatible.
If not running in a login session, some tests are skipped.
Those two changes together mean that it's possible to run test-login in the
test suite.
Tests for sd_pid_get_{unit,user_unit,slice} are added.
sd_seat_get_sessions returns two arrays, that in principle should always match:
the session names and corresponding uids. The second array could be shorter only
if parsing or uid conversion fails. But in that case there is no way to tell
*which* uid is wrong, so they are *all* useless. It's better to simplify things and
just return an error if parsing fails.
As described by Luke Shumaker:
sd_seat_get_sessions looks at /run/systemd/seats/${seat_name}:SESSIONS to get
the list of sessions (which I believe is correct), and at
/run/systemd/seats/${seat_name}:ACTIVE_SESSIONS for the list of users (which
I believe is incorrect); I believe that it should look at the UIDS field for
the list of users. As far as I can tell, the ACTIVE_SESSIONS field is never
even present in the seats file. I also believe that this has been broken
since the function was first committed almost 6 years ago.
Fixes#5743.
Add tests for prefix creation, router variable setting and finally
verify that a Router Advertisement is properly formatted when sending.
Also check that there is a Router Advertisment with zero lifetime
when Router Advertisement sending is stopped.
Receive Router Solicitations and send a unicast Router Advertisment
in response. Refactor ICMPv6 packet handling code so that the common
ICMPv6 validation parts are reused between the existing router
discovery and the new functionality adding reception of Router
Solicitation messages.
Create and remove the ICMPv6 Router Advertisement socket file
descriptor and implement Router Advertisment sending. As not
all options are mandatory, use IO vectors to point to the included
options and the prefix information.
Reuse and refactor the functionality already present for Router
Solicitations in order to create a socket for sending Router
Advertisements. Anticipate reception of incoming Router
Solicitations by setting the ICMPv6 filter accordingly. Also set
the unicast hop limit to 255 for ICMPv6 sockets as unicast Router
Advertisments are to be sent in response to Router Solicitations.
Update the Router Solicitation test case code with a function
definition in order to keep the test case working.
Router Advertisements are sent uniformly distributed between a
minimum and maximum time according to RFC 4861, Section 6.2.4.
Default values from RFC 4861 are for now used as minimum and
maximum Router Advertisement timeouts.
When stopping, a Router Advertisement with a router lifetime set
to zero is sent in order to inform any nodes that the interface
on this host no longer is a router.
Add variables for enabling Router Advertisements, router lifetime as
well as managed and other information flags indicating use of DHCPv6.
Add configuration of default router preferences as defined in RFC 4191.
IPv6PrefixDelegation in the [Network] section has to be set in order
to enable prefix delegation. The rest of the prefix delegation values
are stored in the [IPv6PrefixDelegation] section. The host will act as
a default router if it is given a non-zero lifetime with
RouterLifetimeSec. Managed and OtherInformation booleans set the level
of DHCPv6 support, and the RouterPreference configures the router's
preference between low, medium and high. Words 'normal' and 'default'
are added as synonyms for 'medium' just to make configuration simpler.
This adds a section like the following to .network configuration files:
[Network]
IPv6PrefixDelegation=true
[IPv6PrefixDelegation]
RouterLifetimeSec=2000
Managed=false
OtherInformation=true
RouterPreference=medium
Support zero or more [IPv6Prefix] sections in the network configuration
files. Each section can have one Prefix=<subnet>[/<prefixlength>]
option, with the preferred and valid lifetimes specified by
ValidLifetimeSec and PreferredLifetimeSec measured in seconds, and
with onlink and address autoconfiguration booleans specified by
OnLink and AddressAutoconfiguration variables.
This adds a section like the following to .network configuration files:
[IPv6Prefix]
Prefix=2001:db8:dead:beef::/64
OnLink=true
AddressAutoconfiguration=true
ValidLifetimeSec=1500
PreferredLifetimeSec=1000
Define Router Advertisement prefix structure. Add the Prefix
Information ICMPv6 option defined in RFC 4861 to the prefix
information structure, as it will simplify sending a Prefix
Information option later on. In order to handle endianness
correctly, the structure is redefined here instead of using
the one in netinet/icmp6.h.
Add functions to create and modify prefix information and set
default values as defined in RFC 4861, Section 6.2.1.
Without cc9daff228, this results in:
src/libsystemd/sd-bus/test-bus-vtable-cc.cc:56:1: sorry, unimplemented: non-trivial designated initializers not supported
};
^
The condition is on "word", hence we give word instead of rvalue.
An assert would be triggered if !utf8_is_valid(word) is true and
rvalue == NULL, since log_syntax_invalid_utf8 calls utf8_escape_invalid
which calls assert(str).
A test case has been added to test with valid and invalid utf8.
