IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When multiple configuration file groups are shown together (e.g.
systemd-analyze cat-config systemd/system.conf systemd/user.conf), it's nice
to separate them visually.
I tried first to write a line of spaces and underline that. This does not look
too good, because the line is too low. Then I tried a block of blue-background
spaces. In this version, there are two lines, one is full of spaces and
underlined, so visually we get an empty line in the middle.
I then tried underlining the last line of the previous file. This does not look
right, unless the line is full width, i.e. unless spaces are written out until
the end of the line. But when those spaces are added, it's not clear if they
were part of the original file or not. Here, the spaces are between groups, so
it seems less likely that somebody will mistake those spaces for part of the
configuration file.
If the main config file or one of the drop-ins did not have the final newline,
there would be no seperating empty line (or if this was the last file
displayed, our own output would end without the final newline, possibly running
into the subsequent prompt or such). copy_bytes() does not know anything about
lines, so let's just use a normal loop with read_line() and puts().
This implements similar logic as conf_files_cat(), but with slightly different
file gathering logic. I also want to add support for replacement files later on,
so it seems better to keep those two file-gathering functions separate.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
This fixes the following warning with clang and meson-0.46.0,
```
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-typedef-redefinition: YES
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-gnu-variable-sized-type-not-at-end: YES
```
(or in terms of the names of the actual files on disk, do not link
libsystemd-shared-238.a into libcore.a).
libsystemd_static is linked into libsystemd_shared, which in turn means that
anything that links to libcore and libsystemd_shared will get libsystemd_static
twice:
$ cc -o systemd 'systemd@exe/src_core_main.c.o' -Wl,--no-undefined -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -pie -DVALGRIND -Wl,--start-group src/core/libcore.a src/shared/libsystemd-shared-238.a src/shared/libsystemd-shared-238.so -pthread -lrt -lseccomp -lselinux -lmount -lblkid -Wl,--end-group -lseccomp -lpam -L/lib64 -laudit -lkmod -lmount -lrt -lcap -lacl -lcryptsetup -lgcrypt -lip4tc -lip6tc -lseccomp -lselinux -lidn -llzma -llz4 -lblkid '-Wl,-rpath,$ORIGIN/src/shared' -Wl,-rpath-link,/home/zbyszek/src/systemd/build/src/shared
This propagation of the dependency seems correct (in the sense that meson is
doing the expected thing based on the given configuration). Linking was done
this way in the original meson conversion. I was probably trying to get
everything to compile and link, I'm not sure why this particular choice was
made. In the meantime, meson has gotten better at propagating dependencies, so
it's possible that this had slightly different effect in the original
conversion, but I did not verify this. Either way, I think we should drop this.
With the patch:
$ cc -o systemd 'systemd@exe/src_core_main.c.o' -Wl,--no-undefined -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -pie -DVALGRIND -Wl,--start-group src/core/libcore.a src/shared/libsystemd-shared-238.so -pthread -lrt -lseccomp -lselinux -lmount -Wl,--end-group -lblkid -lrt -lseccomp -lpam -L/lib64 -laudit -lkmod -lselinux -lmount '-Wl,-rpath,$ORIGIN/src/shared' -Wl,-rpath-link,/home/zbyszek/src/systemd/build/src/shared
This is more correct because we're not linking the same code twice.
With the patch, libystemd_static is used in exactly four places:
- src/shared/libsystemd-shared-238.so
- src/udev/libudev.so.1.6.10
- pam_systemd.so
- test-bus-error
(compared to a bunch more executables before, including systemd,
systemd-analyze, test-hostname, test-ns, etc.)
Size savings are also noticable:
$ size /var/tmp/inst?/usr/lib/systemd/libsystemd-shared-238.so
text data bss dec hex filename
2397826 578488 15920 2992234 2da86a /var/tmp/inst1/usr/lib/systemd/libsystemd-shared-238.so
2397826 578488 15920 2992234 2da86a /var/tmp/inst2/usr/lib/systemd/libsystemd-shared-238.so
$ size /var/tmp/inst?/usr/lib/systemd/systemd
text data bss dec hex filename
1858790 261688 9320 2129798 207f86 /var/tmp/inst1/usr/lib/systemd/systemd
1556358 258704 8072 1823134 1bd19e /var/tmp/inst2/usr/lib/systemd/systemd
$ du -s /var/tmp/inst?
52216 /var/tmp/inst1
50844 /var/tmp/inst2
https://github.com/google/oss-fuzz/issues/1330#issuecomment-384054530 might be related.
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Right now gpt-auto-generator will iterate through all mount entries, and
silently ignore failure to check if the mount point target is empty.
This can hide real errors (in particular from MAC), so instead let's warn
and return failure at the end if this happens. We will still iterate
over other candidates, so there should be no change in behaviour.
Logging is moved into path_is_busy() to avoid the duplication of the same
logging code in the two callers.
A regression was introduced that caused the mtime of /etc/.updated
and /var/.updated to be the current time when systemd-update-done
ran instead of being copied from /usr.
This was nearly fixed, but due to fflush being called after mtime
was carefully set, it was overwritten with the current time.
Regression introduced in 872c40396384f9fa89b01baf4e739d28ed590299
A fix was just missed in 39c38d773fbe2b4f76ff29ecd3344640efb9a86c
Fixes#8806
With the recent terminal_urlify() APIs we'll now sometimes generate
clickable link CSO sequences. Hence we should also be able to remove
them again from strings. This beefs up the logic to do so.
Follow-up for: 23b27b39d2a3a002ad827a2e8a9872a51495d797
Quoting https://github.com/systemd/systemd/pull/8760#discussion_r183321060:
> When we originally added the errno patching we went for a "best of both
> worlds" approach, i.e. that we override errno if an error is specified, but
> if no error is specified (i.e. 0 is passed as error code) then we use the
> previously set errno, similar in style how plain `printf()` would do it. In
> retrospect I think we almost never purposefully made use of the second,
> i.e. the plain `printf()` logic, but we multiple times ran into this case
> accidentally and introduced a bug. Hence yes, it probably makes sense to
> switch this over, and consistently ignore the `errno` already set and always
> override it with the error passed in. The only problem I see with that is: I
> wonder if there might be a case or two lurking somewhere where we actually
> made use of the "best of both worlds" approach, and if so, if we can detect
> where... (But then again, even if there is, and we fail to find those cases,
> maybe that's not all bad, as it's just a few new bugs against probably fixing
> many more old and future bugs, if you follow what I mean).
I scanned our codebase, and found some bugs in the value passed to log_*_errno,
but no intentional cases of error=0 being passed.
I'm not sure if I understand the original code. AFAICS, errno does not
have to be set at all in this callback.
ratelimit_test() returns positive if we are under limit. The code would only
log if the condition happened very often, which I assume is not inteded, and
this check was supposed to prevent too much logging.
Once the seat is acquired, gnome-settings-daemon (GSD) takes full
control of rfkill by sending RFKILL_IOCTL_NOINPUT ioctl to disable
rfkill control in kernel.
Since GSD expects wlan keycode when the hotkey gets pressed, we should
change the "unknown" to "wlan" accordingly.
Tested under both GNOME and KDE.
