IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
oss-fuzz flags this as:
==1==WARNING: MemorySanitizer: use-of-uninitialized-value
0. 0x7fce77519ca5 in ascii_is_valid systemd/src/basic/utf8.c:252:9
1. 0x7fce774d203c in ellipsize_mem systemd/src/basic/string-util.c:544:13
2. 0x7fce7730a299 in print_multiline systemd/src/shared/logs-show.c:244:37
3. 0x7fce772ffdf3 in output_short systemd/src/shared/logs-show.c:495:25
4. 0x7fce772f5a27 in show_journal_entry systemd/src/shared/logs-show.c:1077:15
5. 0x7fce772f66ad in show_journal systemd/src/shared/logs-show.c:1164:29
6. 0x4a2fa0 in LLVMFuzzerTestOneInput systemd/src/fuzz/fuzz-journal-remote.c:64:21
...
I didn't reproduce the issue, but this looks like an obvious error: the length
is specified, so we shouldn't use the string with any functions for normal
C-strings.
The test is heavily dependent on timeouts, and if we are run in
potentially very slow QEMU instances there's a good chance we'll miss
some which we normally wouldn't miss. Hence, let's test this one in
nspawn only. Given that the test is purely in service management it
shouldn't matter whether it runs in nspawn or qemu, hence keep running
it in nspawn, but don't bother with qemu.
Similar, do this for TEST-03-JOBS, too, which operates with relatively
short sleep times internally.
Fixes: #9123
As it turns out /usr/share/selinux/devel/ is now included in more RPMs
than just selinux-policy-devel (specifically container-selinux, which is
pulled in by various container related RPMs). Let's hence tighten the
dependency check a bit and look for systemd's .if file, which is what we
actually care about.
First, ellipsize() and ellipsize_mem() should not read past the input
buffer. Those functions take an explicit length for the input data, so they
should not assume that the buffer is terminated by a nul.
Second, ellipsization was off in various cases where wide on multi-byte
characters were used.
We had some basic test for ellipsize(), but apparently it wasn't enough to
catch more serious cases.
Should fix https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8686.
journalctl -o short would display those entries, but journalctl -o short-full
would refuse. If the entry is bad, just fall back to the receive-side realtime
timestamp like we would if it was completely missing.
We'd look for a '=' separator using memchr, i.e. ignoring any nul bytes in the
string, but then do a strndup, which would terminate on any nul byte, and then
again do a memcmp, which would access memory past the chunk allocated by strndup.
Of course, we probably shouldn't allow keys with nul bytes in them. But we
currently do, so there might be journal files like that out there. So let's fix
the journal-reading code first.
Something is wrong with the entry (probably a missing timestamp), so no point
in rotating. But suppress the error in process_source(), so that the processing
of the data stream continues.
Also, just return 0 from writer_write() on success, the only caller doesn't
care.
This corresponds nicely with the specifiers we already pass for
/var/lib, /var/cache, /run and so on.
This is particular useful to update the test-path service files to
operate without guessable files, thus allowing multiple parallel
test-path invocations to pass without issues (the idea is to set $TMPDIR
early on in the test to some private directory, and then only use the
new %T or %V specifier to refer to it).
Test the "[Bridge]" section keys
```
[Bridge]
UnicastFlood=true
HairPin=true
UseBPDU=true
FastLeave=true
AllowPortToBeRoot=true
Cost=555
Priority=23
```
```
test_bridge_init (__main__.BridgeTest) ... ok
test_bridge_port_priority (__main__.BridgeTest) ... ok
test_bridge_port_priority_set_zero (__main__.BridgeTest)
It should be possible to set the bridge port priority to 0 ... ok
test_bridge_port_property (__main__.BridgeTest)
Test the "[Bridge]" section keys ... ok
```
Yes, the output is sometimes annyoing, but /dev/null is not the right
place...
I figure this redirection was left in from some debugging session, let's
fix it, and make the setup_basic_environment invocation like in all
other test scripts.
Nested KVM is very flaky as we learnt from our CI. Hence, let's avoid
KVM whenever we detect we are already running inside of KVM.
Maybe one day nested KVM is fixed, at which point we can turn this on
again, but for now let's simply avoid nested KVM, since reliable CI is
more important than quick CI, I guess.
And yes, avoiding KVM for our qemu runs does make things substantially
slower, but I think it's not a complete loss.
Inspired by @evverx' findings in:
https://github.com/systemd/systemd/pull/8701#issuecomment-380213302
To indicate that the there're no more entries, these wrappers return false but
did leave the passed pointed unmodified.
However EOF is not an error and is a very common case so initialize the output
argument to NULL even in this case so callers don't need to do that.
Fixes: #8721
We go through the whole file system, so this test can take arbitrary time. But
this test is still quite useful, so let's at least try to make it more efficent
by not descending at all into the directories we would filter out later on
anyway.
Also increase the timeout, in case the previous step doesn't help enough.
Absolute paths make everything simple and quick, but sometimes this requirement
can be annoying. A good example is calling 'test', which will be located in
/usr/bin/ or /bin depending on the distro. The need the provide the full path
makes it harder a portable unit file in such cases.
This patch uses a fixed search path (DEFAULT_PATH which was already used as the
default value of $PATH), and if a non-absolute file name is found, it is
immediately resolved to a full path using this search path when the unit is
loaded. After that, everything behaves as if an absolute path was specified. In
particular, the executable must exist when the unit is loaded.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This makes the script wait for the newly created partition to
show up before trying to put a filesystem on it, which should
prevent the tests from failing with the following error:
```
New situation:
Disklabel type: dos
Disk identifier: 0x3541a0ec
Device Boot Start End Sectors Size Id Type
/dev/loop6p1 2048 800767 798720 390M 83 Linux
/dev/loop6p2 800768 819199 18432 9M 83 Linux
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
The file /dev/loop6p1 does not exist and no size was specified.
make: *** [setup] Error 1
F: Failed to mkfs -t ext4
Makefile:4: recipe for target 'setup' failed
```
ubsan times out because we do too many allocations:
$ valgrind build/fuzz-unit-file test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full
...
test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full... ok
==1757==
==1757== HEAP SUMMARY:
==1757== in use at exit: 0 bytes in 0 blocks
==1757== total heap usage: 199,997 allocs, 199,997 frees, 90,045,318,585 bytes allocated
...
==3256== total heap usage: 100,120 allocs, 100,120 frees, 13,097,140 bytes allocated
https://oss-fuzz.com/v2/issue/4651449704251392/6977 should now be really fixed.
e3c3d6761b was the first attempt, but even with this change, e3c3d6761b
still makes sense.
With this "sudo ./run-integration-tests.sh" should work fully without
exception, even on systems lacking SELinux (in which case that test will
just be skipped)
It's always visible:
$ sudo modprobe sit
$ sudo unshare -n ip l
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...
grep already indicates if it matched anything by return value.
Additional advantage is then that if the test fails, the unexpected
matching lines are visible in the log output.
