IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch adds two new special character prefixes to ExecStart= and
friends, in addition to the existing "-", "@" and "+":
"!" → much like "+", except with a much reduced effect as it only
disables the actual setresuid()/setresgid()/setgroups() calls, but
leaves all other security features on, including namespace
options. This is very useful in combination with
RuntimeDirectory= or DynamicUser= and similar option, as a user
is still allocated and used for the runtime directory, but the
actual UID/GID dropping is left to the daemon process itself.
This should make RuntimeDirectory= a lot more useful for daemons
which insist on doing their own privilege dropping.
"!!" → Similar to "!", but on systems supporting ambient caps this
becomes a NOP. This makes it relatively straightforward to write
unit files that make use of ambient capabilities to let systemd
drop all privs while retaining compatibility with systems that
lack ambient caps, where priv dropping is the left to the daemon
codes themselves.
This is an alternative approach to #6564 and related PRs.
This also alters the documentation to recommend memfds rather than /run
for serializing state across reboots. That's because /run doesn't
actually have the same lifecycle as the fd store, as it is cleared out
on restarts.
Fixes: #5606
Make sure to only apply the O_NONBLOCK flag to the fds passed via socket
activation.
Previously the flag was also applied to the fds which came from the fd store
but this was incorrect since services, after being restarted, expect that these
passed fds have their flags unchanged and can be reused as before.
The documentation was a bit unclear about this so clarify it.
The third paragraph of the Description already linked to
systemd.resource-control(5), but it was missing from the list of
additional options for the [Service] section.
The manpage claimed that ExecStop would be followed immediately by
SIGKILL, whereas the actual behavior is to go through KillMode= and
KillSignal= first.
Fixes#4490
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
Our warning message was misleading, because we wouldn't "correct" anything,
we'd just ignore unkown escapes. Update the message.
Also, print just the extracted word (which contains the offending sequences) in
the message, instead of the whole line.
Fixes#4697.
This should simplify monitoring tools for services, by passing the most basic
information about service result/exit information via environment variables,
thus making it unnecessary to retrieve them explicitly via the bus.
As suggested by @mbiebl we already use the "!" special char in unit file
assignments for negation, hence we should not use it in a different context for
privileged execution. Let's use "+" instead.
Type=notify has a magic overriding case where a NotifyAccess=none
is turned into a NotifyAccess=main for sanity purposes.
This makes docs more clear about such behavior:
2787d83c28/src/core/service.c (L650):L651
This patch implements the new magic character '!'. By putting '!' in front
of a command, systemd executes it with full privileges ignoring paramters
such as User, Group, SupplementaryGroups, CapabilityBoundingSet,
AmbientCapabilities, SecureBits, SystemCallFilter, SELinuxContext,
AppArmorProfile, SmackProcessLabel, and RestrictAddressFamilies.
Fixes partially https://github.com/systemd/systemd/issues/3414
Related to https://github.com/coreos/rkt/issues/2482
Testing:
1. Create a user 'bob'
2. Create the unit file /etc/systemd/system/exec-perm.service
(You can use the example below)
3. sudo systemctl start ext-perm.service
4. Verify that the commands starting with '!' were not executed as bob,
4.1 Looking to the output of ls -l /tmp/exec-perm
4.2 Each file contains the result of the id command.
`````````````````````````````````````````````````````````````````
[Unit]
Description=ext-perm
[Service]
Type=oneshot
TimeoutStartSec=0
User=bob
ExecStartPre=!/usr/bin/sh -c "/usr/bin/rm /tmp/exec-perm*" ;
/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-start-pre"
ExecStart=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-start" ;
!/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-star-2"
ExecStartPost=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-start-post"
ExecReload=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-reload"
ExecStop=!/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-stop"
ExecStopPost=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-stop-post"
[Install]
WantedBy=multi-user.target]
`````````````````````````````````````````````````````````````````
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
This makes sure we never run two control processes at the same time, we cannot keep track off.
This introduces a slight change of behaviour but cleans up the definition of ExecStop= and ExecStopPost=. The former is
now invoked only if the service managed to start-up correctly. The latter is called even if start-up failed half-way.
Thus, ExecStopPost= may be used as clean-up step for both successful and failed start-up attempts, but ExecStop='s
purpose is clearly defined as being responsible for shutting down the service and nothing else.
The precise behaviour of this was not documented yet. This commit adds the necessary docs.
Fixes: #1254
This completes the set of man pages for sd-event and contains some minor
other fixes for other man pages too.
The sd_event_set_name(3) man page is renamed to
sd_event_source_set_description(3), which is the correct name of the
concept today.
For all units ensure there's an "Automatic Dependencies" section in the
man page, and explain which dependencies are automatically added in all
cases, and which ones are added on top if DefaultDependencies=yes is
set.
This is also done for systemd.exec(5), systemd.resource-control(5) and
systemd.unit(5) as these pages describe common behaviour of various unit
types.
Previously it was just descibed that ExecStartPost= commands were
started "after" the ExecStart= command(s).
This hasn't specified after which event, which varies from after it has
been started, after it has exited, after it has sent READY=1 or after it
has taken the bus name, depending on Type=.
This now describes that it happens after the *service* has "started",
as defined by the Type=, and provides some clarification about precisely
when this is.
This may be unnecessary duplication, but it removes the ambiguity as to
whether RemainAfterExit=no means that ExecStartPost= shouldn't be
started because it means the service has stopped when the ExecStart=
command terminates, not "started".
https://bugzilla.redhat.com/show_bug.cgi?id=1251334
is about a unit file which has
Environment=TERM=linux PS1=system-upgrade:\w\$\x20
We used to allow that, but after recent tightening of parsing
rules, we barf. Make it clear that this is intentional.
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
With this change it is possible to send file descriptors to PID 1, via
sd_pid_notify_with_fds() which PID 1 will store individually for each
service, and pass via the usual fd passing logic on next invocation.
This is useful for enable daemon reload schemes where daemons serialize
their state to /run, push their fds into PID 1 and terminate, restoring
their state on next start from the data in /run and passed in from PID
1.
The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on
them, and the service they belong to are either not dead or failed, or
have a job queued.
The handling of the command name and other arguments is unified. This
simplifies things and should make them more predictable for users.
Incidentally, this makes ExecStart handling match the .desktop file
specification, apart for the requirment for an absolute path.
https://bugs.freedesktop.org/show_bug.cgi?id=86171
Add a new directive called BusPolicy to define custom endpoint policies. If
one such directive is given, an endpoint object in the service's ExecContext is
created and the given policy is added to it.
When this system-wide start-up timeout is hit we execute one of the
failure actions already implemented for services that fail.
This should not only be useful on embedded devices, but also on laptops
which have the power-button reachable when the lid is closed. This
devices, when in a backpack might get powered on by accident due to the
easily reachable power button. We want to make sure that the system
turns itself off if it starts up due this after a while.
When the system manages to fully start-up logind will suspend the
machine by default if the lid is closed. However, in some cases we don't
even get as far as logind, and the boot hangs much earlier, for example
because we ask for a LUKS password that nobody ever enters.
Yeah, this is a real-life problem on my Yoga 13, which has one of those
easily accessible power buttons, even if the device is closed.
This is useful for services that simply want to run something on
shutdown, but not at bootup. They should only set ExecStop= but leave
ExecStart= unset.
Restart=on-abnormal is similar to Restart=on-failure, but avoids
restarts on unclean exit codes (but still doing restarts on all
obviously unclean exits, such as timeouts, signals, coredumps, watchdog
timeouts).
Also see:
https://fedorahosted.org/fpc/ticket/191
When rebooting with systemctl, an optional argument can be passed to the
reboot system call. This makes it possible the specify the argument in a
service file and use it when the service triggers a restart.
This is useful to distinguish between manual reboots and reboots caused by
failing services.
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
* standardize capitalization of STDIN, STDOUT, and STDERR
* reword some sentences for clarity
* reflow some very long lines to be shorter than ~80 characters
* add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
The behavior of this is a little cryptic in that $MAINPID must exit as
a direct result of receiving a signal in order for a listed signal to
be considered a success condition.
grawity:
It looks like the old version _was_ correct – the default value will
be "Type=dbus" if the service has a BusName set.
Suggested change: "if neither Type= nor BusName= is specified"
This is a recurring submission and includes corrections to:
- missing words, preposition choice.
- change of /lib to /usr/lib, because that is what most distros are
using as the system-wide location for systemd/udev files.
We have lots of questions from people who assume that shell syntax works
here, so let's be very explicit what is allowed and what is not. A few
examples should also help.
http://bugs.debian.org/732156
We now treat passno as boleans in the generators, and don't need this any more. fsck itself
is able to sequentialize checks on the same local media, so in the common case the ordering
is redundant.
It is still possible to force an order by using .d fragments, in case that is desired.
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous comma
placement fixes…
Since cgroups are mostly now an implementation detail of systemd lets
deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to
systemd.resource-control(5) and uses the term "resource control" rather
than "cgroup" where appropriate.
This leaves the word "cgroup" in at a couple of places though, like for
example systemd-cgtop and systemd-cgls where cgroup stuff is at the core
of what is happening.
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous
comma placement fixes…
Highligts in this particular commit:
- the "unsigned" type qualifier is completed to form a full type
"unsigned int"
- alphabetic -> lexicographic (that way we automatically define how
numbers get sorted)
This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.
In this particular commit:
- the usual comma fixes
- expand contractions (this is prose)
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
When manpages are displayed on a terminal, <literal>s are indistinguishable
from surrounding text. Add quotes everywhere, remove duplicate quotes,
and tweak a few lists for consistent formatting.
https://bugzilla.redhat.com/show_bug.cgi?id=874631
The documentation makes it sound like ExecStopPost is only run when
stopping the service with `systemctl stop foo.service`
However, that is not the case, as it also gets run when the service
unexpectedly exists, crashes, or gets SIGKILLed.
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
https://bugs.freedesktop.org/show_bug.cgi?id=55890
Fixed typos, serial comma, and removed "either" as there were more
than two options. Also did an extra rename of "system-shutdown"
to "systemd-shutdown" that was forgotten in commit
8bd3b8620c
As you likely know, Arch Linux is in the process of moving to systemd.
So I was reading through the various systemd docs and quickly became
baffled by this new abbreviation "resp.", which I've never seen before
in my English-mother-tongue life.
Some quick Googling turned up a reference:
<http://www.transblawg.eu/index.php?/archives/870-Resp.-and-other-non-existent-English-wordsNicht-existente-englische-Woerter.html>
I guess it's a literal translation of the German "Beziehungsweise", but
English doesn't work the same way. The word "respectively" is used
exclusively to provide an ordering connection between two lists. E.g.
"the prefixes k, M, and G refer to kilo-, mega-, and giga-,
respectively." It is also never abbreviated to "resp." So the sentence
"Sets the default output resp. error output for all services and
sockets" makes no sense to a natural English speaker.
This patch removes all instances of "resp." in the man pages and
replaces them with sentences which are much more clear and, hopefully,
grammatically valid. In almost all instances, it was simply replacing
"resp." with "or," which the original author (Lennart?) could probably
just do in the future.
The only other instances of "resp." are in the src/ subtree, which I
don't feel privileged to correct.
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
In some cases, like wrong configuration, restarting after error
does not help, so administrator can specify statuses by RestartPreventExitStatus
which will not cause restart of a service.
Sometimes you have non-standart exit status, so this can be specified
by SuccessfulExitStatus.
This moves FsckPassNo= and SysVStartPriority= into its own
"Compatibility Options" section in the man page to clarify that these
options are not useful for anything but establishing a limited amount of
compatibility.
Also stop exposing these options on the bus.
