IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In a few cases, the prefix was originally necessary because a different helper
script was used for automake, and a different one for meson. But now we use
meson exclusively, and the prefix isn't useful. This also synchronizes the
target name, file name, and variable name in meson.build. The targets exposed
by meson didn't have the prefix, so the user interface is unchanged.
(The prefix is retained in the few tools that are used for meson itself,
e.g. meosn-vcs-tag.sh, meson-make-symlink.sh, etc.)
Having taken a look at https://github.com/systemd/systemd/runs/645252074?check_suite_focus=true
where fuzz-journal-remote failed with
```
AddressSanitizer:DEADLYSIGNAL
=================================================================
==16==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f864f98948e bp 0x7ffde5c6b7c0 sp 0x7ffde5c6b560 T0)
==16==The signal is caused by a READ memory access.
==16==Hint: address points to the zero page.
SCARINESS: 10 (null-deref)
#0 0x7f864f98948e in output_short /work/build/../../src/systemd/src/shared/logs-show.c
#1 0x7f864f984624 in show_journal_entry /work/build/../../src/systemd/src/shared/logs-show.c:1154:15
#2 0x7f864f984b63 in show_journal /work/build/../../src/systemd/src/shared/logs-show.c:1239:21
#3 0x4cabab in LLVMFuzzerTestOneInput /work/build/../../src/systemd/src/fuzz/fuzz-journal-remote.c:67:21
#4 0x51fd16 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /src/libfuzzer/FuzzerLoop.cpp:556:15
#5 0x51c330 in fuzzer::Fuzzer::RunOne(unsigned char const*, unsigned long, bool, fuzzer::InputInfo*, bool*) /src/libfuzzer/FuzzerLoop.cpp:470:3
#6 0x523700 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:765:7
#7 0x5246cd in fuzzer::Fuzzer::Loop(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:792:3
#8 0x4de3d1 in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /src/libfuzzer/FuzzerDriver.cpp:824:6
#9 0x4cfb47 in main /src/libfuzzer/FuzzerMain.cpp:19:10
#10 0x7f864e69782f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#11 0x41f2a8 in _start (out/fuzz-journal-remote+0x41f2a8)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV /work/build/../../src/systemd/src/shared/logs-show.c in output_short
==16==ABORTING
MS: 0 ; base unit: 0000000000000000000000000000000000000000
0x44,0x3d,0xa,0x5f,0x5f,0x52,0x45,0x41,0x4c,0x54,0x49,0x4d,0x45,0x5f,0x54,0x49,0x4d,0x45,0x53,0x54,0x41,0x4d,0x50,0x3d,0x31,0xa,0xa,
D=\x0a__REALTIME_TIMESTAMP=1\x0a\x0a
artifact_prefix='./'; Test unit written to ./crash-d635b9dd31cceff3c912fd45e1a58d7e90f0ad73
Base64: RD0KX19SRUFMVElNRV9USU1FU1RBTVA9MQoK
```
I was wondering why it hadn't been caught by the compiler even though clang should have failed to compile it with
```
../src/shared/logs-show.c:624:25: warning: null passed to a callee that requires a non-null argument [-Wnonnull]
print_multiline(f, 4 + fieldlen + 1, 0, OUTPUT_FULL_WIDTH, 0, false,
^
../src/shared/logs-show.c:161:24: note: callee declares array parameter as static here
size_t highlight[static 2]) {
^ ~~~~~~~~~~
../src/shared/logs-show.c:1239:21: warning: null passed to a callee that requires a non-null argument [-Wnonnull]
r = show_journal_entry(f, j, mode, n_columns, flags, NULL, NULL, ellipsized);
^ ~~~~
../src/shared/logs-show.c:1133:30: note: callee declares array parameter as static here
const size_t highlight[static 2],
^ ~~~~~~~~~~
2 warnings generated.
```
Given that judging by https://github.com/systemd/systemd/issues/13039 it doesn't seem to be
the first time issues like that have been missed I think it would be better to turn nonnull on
and get around false positives on a case-by-case basis with DISABLE_WARNING_NONNULL .. REENABLE_WARNING
Reopens https://github.com/systemd/systemd/issues/6119
By using a newline after executable( and run_target(, we get less
indentation and the indentation level does not change when the returned
object is saved to a variable.
Enables building systemd without systemd-analyze, which in
return saves approx. 4 MB of space upon installing systemd.
Signed-off-by: Jakov Smolic <jakov.smolic@sartura.hr>
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
On azure systemd.systemd ci, the build would fail with:
meson.build:53:0: ERROR: Program or command '/home/appuser/fuzzer/tools/add-git-hook.sh' not found or not executable
We use find_program() for all helpers, so let's do it for this one too.
This should solve the issue, whatever it exactly is.
Build option "link-timesyncd-shared" to build a statically linked
systemd-timesyncd by using
-Dlink-udev-shared=false -Dlink-timesyncd-shared=false
on systems with full systemd stack except systemd-timesyncd, such
as RHEL/CentOS 8.
Fixes systemd build in Fedora rawhide.
The old ldsdir option is not useful, because both the directory and the
file name changed. Let's remove the option and try to autodetect the file
name. If this turns out to be not enough, a new option to simply specify
the full path to the file can be added.
F31:
efi arch: x86_64
EFI machine type: x64
EFI CC ccache cc
EFI lds: /usr/lib64/gnuefi/elf_x64_efi.lds
EFI crt0: /usr/lib64/gnuefi/crt0-efi-x64.o
EFI include directory: /usr/include/efi
F32:
efi arch: x86_64
EFI machine type: x64
EFI CC ccache cc
EFI lds: /usr/lib/gnuefi/x64/efi.lds
EFI crt0: /usr/lib/gnuefi/x64/crt0.o
EFI include directory: /usr/include/efi
This makes things a bit simpler and the build a bit faster, because we don't
have to rewrite files to do the trivial substitution. @rootbindir@ is always in
our internal $PATH that we use for non-absolute paths, so there should be no
functional change.
This changes nss-systemd to use the new varlink user/group APIs for
looking up everything.
(This also changes the factory /etc/nsswitch.conf line to use for
hooking up nss-system to use glibc's [SUCCESS=merge] feature so that we
can properly merge group membership lists).
Fixes: #12492
Build option "link-networkd-shared" to build a statically linked
systemd-networkd by using
-Dlink-udev-shared=false -Dlink-networkd-shared=false
on systems with full systemd stack except systemd-networkd, such
as RHEL/CentOS 8.
This adds a new crypttab option for volumes "pkcs11-uri=" which takes a
PKCS#11 URI. When used the key stored in the line's key file is
decrypted with the private key the PKCS#11 URI indiciates.
This means any smartcard that can store private RSA keys is usable for
unlocking LUKS devices.
This is not a new system call at all (since kernel 2.2), however it's
not exposed in glibc (a wrapper is exposed however in sigqueue(), but it
substantially simplifies the system call). Since we want a nice fallback
for sending signals on non-pidfd systems for pidfd_send_signal() let's
wrap rt_sigqueueinfo() since it takes the same siginfo_t parameter.
There is no change in the file right now, but the download seems to work
OK.
It's funny that the biggest company in the world cannot provide a
download link in plain text.
This partially reverts db11487d10 (the logic to
calculate the correct value is removed, we always use the same setting as for
the system manager). Distributions have an easy mechanism to override this if
they wish.
I think making this configurable is better, because different distros clearly
want different defaults here, and making this configurable is nice and clean.
If we don't make it configurable, distros which either have to carry patches,
or what would be worse, rely on some other configuration mechanism, like
/etc/profile. Those other solutions do not apply everywhere (they usually
require the shell to be used at some point), so it is better if we provide
a nice way to override the default.
Fixes #13469.
We compile some c++ code for tests. We would simply use the default options for
those. When the previous commit raised the default warning level, we started
getting warnings from c++ code. Let's add the most important options to the c++
command, so that we get a compilation without any warnings again.
I don't think it makes sense to add *all* the options that we add for c to the
c++ flags, because testing them takes quite a while, and the c++ compilations
are for small amounts of code, mostly to check that the headers have compatible
syntax.
Let's bump up the warning level, and not add by -Wextra by hand. This is the
approach recommended by meson. The idea is that all projects should be as
similar as possible to make it easier for users to switch between projects.
Increase the required version to ensure TLS 1.3 is always supported when using GnuTLS for DNS-over-TLS and allow further changes to use recent API additions.
Per https://github.com/mesonbuild/meson/issues/5003, ternary doesn't
always work as function args with older versions of meson.
Expand out ternary statements to stay compatible with older versions (< 0.49).
As discussed on systemd-devel [1], in Fedora we get lots of abrt reports
about the watchdog firing [2], but 100% of them seem to be caused by resource
starvation in the machine, and never actual deadlocks in the services being
monitored. Killing the services not only does not improve anything, but it
makes the resource starvation worse, because the service needs cycles to restart,
and coredump processing is also fairly expensive. This adds a configuration option
to allow the value to be changed. If the setting is not set, there is no change.
My plan is to set it to some ridiculusly high value, maybe 1h, to catch cases
where a service is actually hanging.
[1] https://lists.freedesktop.org/archives/systemd-devel/2019-October/043618.html
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1300212
This change is only about the source tree. We have tmpfiles.d/, modprobe.d/,
sysctl.d/, and sysusers.d/, but for historical reasons, rules/ didn't fit this
pattern. We also *install* it as rules.d/. Let's rename to be consistent.
The ChromeOS ecosystem has a large amount of testing, both automated
and manual across devices including measurement of power regressions.
It's safe to assume that any of these devices will handle USB
auto-suspend appropriately. Use the script from ChromeOS
https://chromium.googlesource.com/chromiumos/platform2/+/master/power_manager/udev/gen_autosuspend_rules.py
to generate udev rules at build time.
This script in systemd `tools/chromeos/gen_autosuspend_rules.py` should be kept
in sync with the ChromeOS version of the script.
Manually added autosuspend devices should be placed in the new
template `rules/61-autosuspend-manual.rules`
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
building systemd fails with a compiler that supports
-fstack-protector but does not enable it by default.
(will miss several __stack_chk_* symbols).
fix this by also adding the switch during linking.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
libcryptsetup v2.0.1 introduced new API calls, supporting 64 bit wide
integers for `keyfile_offset`. This change invokes the new function
call, gets rid of the warning that was added in #7689, and removes
redundant #ifdefery and constant definitions.
See https://gitlab.com/cryptsetup/cryptsetup/issues/359.
Fixes#7677.
This code is not part of the public API of sd-netlink, nor used by it
internally and hence should not be in the sd-netlink directory.
Also, move the test case for it to src/test/.
Priority is 80. At least in Fedora, chrony uses 50, and ntpd 60.
timesyncd has lower priority, because if people install those other packages,
it's most likely on purpose. timesyncd is always installed and provides
less functionality.
This patch introduces the systemd pstore service which will archive the
contents of the Linux persistent storage filesystem, pstore, to other storage,
thus preserving the existing information contained in the pstore, and clearing
pstore storage for future error events.
Linux provides a persistent storage file system, pstore[1], that can store
error records when the kernel dies (or reboots or powers-off). These records in
turn can be referenced to debug kernel problems (currently the kernel stuffs
the tail of the dmesg, which also contains a stack backtrace, into pstore).
The pstore file system supports a variety of backends that map onto persistent
storage, such as the ACPI ERST[2, Section 18.5 Error Serialization] and UEFI
variables[3 Appendix N Common Platform Error Record]. The pstore backends
typically offer a relatively small amount of persistent storage, e.g. 64KiB,
which can quickly fill up and thus prevent subsequent kernel crashes from
recording errors. Thus there is a need to monitor and extract the pstore
contents so that future kernel problems can also record information in the
pstore.
The pstore service is independent of the kdump service. In cloud environments
specifically, host and guest filesystems are on remote filesystems (eg. iSCSI
or NFS), thus kdump relies [implicitly and/or explicitly] upon proper operation
of networking software *and* hardware *and* infrastructure. Thus it may not be
possible to capture a kernel coredump to a file since writes over the network
may not be possible.
The pstore backend, on the other hand, is completely local and provides a path
to store error records which will survive a reboot and aid in post-mortem
debugging.
Usage Notes:
This tool moves files from /sys/fs/pstore into /var/lib/systemd/pstore.
To enable kernel recording of error records into pstore, one must either pass
crash_kexec_post_notifiers[4] to the kernel command line or enable via 'echo Y
> /sys/module/kernel/parameters/crash_kexec_post_notifiers'. This option
invokes the recording of errors into pstore *before* an attempt to kexec/kdump
on a kernel crash.
Optionally, to record reboots and shutdowns in the pstore, one can either pass
the printk.always_kmsg_dump[4] to the kernel command line or enable via 'echo Y >
/sys/module/printk/parameters/always_kmsg_dump'. This option enables code on the
shutdown path to record information via pstore.
This pstore service is a oneshot service. When run, the service invokes
systemd-pstore which is a tool that performs the following:
- reads the pstore.conf configuration file
- collects the lists of files in the pstore (eg. /sys/fs/pstore)
- for certain file types (eg. dmesg) a handler is invoked
- for all other files, the file is moved from pstore
- In the case of dmesg handler, final processing occurs as such:
- files processed in reverse lexigraphical order to faciliate
reconstruction of original dmesg
- the filename is examined to determine which dmesg it is a part
- the file is appended to the reconstructed dmesg
For example, the following pstore contents:
root@vm356:~# ls -al /sys/fs/pstore
total 0
drwxr-x--- 2 root root 0 May 9 09:50 .
drwxr-xr-x 7 root root 0 May 9 09:50 ..
-r--r--r-- 1 root root 1610 May 9 09:49 dmesg-efi-155741337601001
-r--r--r-- 1 root root 1778 May 9 09:49 dmesg-efi-155741337602001
-r--r--r-- 1 root root 1726 May 9 09:49 dmesg-efi-155741337603001
-r--r--r-- 1 root root 1746 May 9 09:49 dmesg-efi-155741337604001
-r--r--r-- 1 root root 1686 May 9 09:49 dmesg-efi-155741337605001
-r--r--r-- 1 root root 1690 May 9 09:49 dmesg-efi-155741337606001
-r--r--r-- 1 root root 1775 May 9 09:49 dmesg-efi-155741337607001
-r--r--r-- 1 root root 1811 May 9 09:49 dmesg-efi-155741337608001
-r--r--r-- 1 root root 1817 May 9 09:49 dmesg-efi-155741337609001
-r--r--r-- 1 root root 1795 May 9 09:49 dmesg-efi-155741337710001
-r--r--r-- 1 root root 1770 May 9 09:49 dmesg-efi-155741337711001
-r--r--r-- 1 root root 1796 May 9 09:49 dmesg-efi-155741337712001
-r--r--r-- 1 root root 1787 May 9 09:49 dmesg-efi-155741337713001
-r--r--r-- 1 root root 1808 May 9 09:49 dmesg-efi-155741337714001
-r--r--r-- 1 root root 1754 May 9 09:49 dmesg-efi-155741337715001
results in the following:
root@vm356:~# ls -al /var/lib/systemd/pstore/155741337/
total 92
drwxr-xr-x 2 root root 4096 May 9 09:50 .
drwxr-xr-x 4 root root 40 May 9 09:50 ..
-rw-r--r-- 1 root root 1610 May 9 09:50 dmesg-efi-155741337601001
-rw-r--r-- 1 root root 1778 May 9 09:50 dmesg-efi-155741337602001
-rw-r--r-- 1 root root 1726 May 9 09:50 dmesg-efi-155741337603001
-rw-r--r-- 1 root root 1746 May 9 09:50 dmesg-efi-155741337604001
-rw-r--r-- 1 root root 1686 May 9 09:50 dmesg-efi-155741337605001
-rw-r--r-- 1 root root 1690 May 9 09:50 dmesg-efi-155741337606001
-rw-r--r-- 1 root root 1775 May 9 09:50 dmesg-efi-155741337607001
-rw-r--r-- 1 root root 1811 May 9 09:50 dmesg-efi-155741337608001
-rw-r--r-- 1 root root 1817 May 9 09:50 dmesg-efi-155741337609001
-rw-r--r-- 1 root root 1795 May 9 09:50 dmesg-efi-155741337710001
-rw-r--r-- 1 root root 1770 May 9 09:50 dmesg-efi-155741337711001
-rw-r--r-- 1 root root 1796 May 9 09:50 dmesg-efi-155741337712001
-rw-r--r-- 1 root root 1787 May 9 09:50 dmesg-efi-155741337713001
-rw-r--r-- 1 root root 1808 May 9 09:50 dmesg-efi-155741337714001
-rw-r--r-- 1 root root 1754 May 9 09:50 dmesg-efi-155741337715001
-rw-r--r-- 1 root root 26754 May 9 09:50 dmesg.txt
where dmesg.txt is reconstructed from the group of related
dmesg-efi-155741337* files.
Configuration file:
The pstore.conf configuration file has four settings, described below.
- Storage : one of "none", "external", or "journal". With "none", this
tool leaves the contents of pstore untouched. With "external", the
contents of the pstore are moved into the /var/lib/systemd/pstore,
as well as logged into the journal. With "journal", the contents of
the pstore are recorded only in the systemd journal. The default is
"external".
- Unlink : is a boolean. When "true", the default, then files in the
pstore are removed once processed. When "false", processing of the
pstore occurs normally, but the pstore files remain.
References:
[1] "Persistent storage for a kernel's dying breath",
March 23, 2011.
https://lwn.net/Articles/434821/
[2] "Advanced Configuration and Power Interface Specification",
version 6.2, May 2017.
https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
[3] "Unified Extensible Firmware Interface Specification",
version 2.8, March 2019.
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf
[4] "The kernel’s command-line parameters",
https://static.lwn.net/kerneldoc/admin-guide/kernel-parameters.html
Some distros install nologin as /usr/sbin/nologin, others as
/sbin/nologin.
Since we can't really on merged-usr everywhere (where the path wouldn't
matter), make the path build time configurable via -Dnologin-path=.
Closes#13028
This means the the code needs to be kept compatible in the shared header,
but I think that still nicer than having two places to declare the same
things.
I added src/boot to -I, so that efi/foo.h needs to be used. This reduces
the potential for accidentally including the wrong header.
When using build/ directory inside of the source directory:
__FILE__: ../src/test/test-log.c
RELATIVE_SOURCE_PATH: ..
PROJECT_FILE: src/test/test-log.c
When using a build directory outside of the source directory:
__FILE__: ../../../home/zbyszek/src/systemd-work/src/test/test-log.c
RELATIVE_SOURCE_PATH: ../../../home/zbyszek/src/systemd-work
PROJECT_FILE: src/test/test-log.c
It was only used for exactly one thing: to substitute in the text in
/var/log/README. But it's use there was completely wrong, because the text
talks about "missing" log files from syslog, so even if we configured systemd
to log to a different directory, the "missing" log files would still be
"missing" from the old location.
Make possible to set NUMA allocation policy for manager. Manager's
policy is by default inherited to all forked off processes. However, it
is possible to override the policy on per-service basis. Currently we
support, these policies: default, prefer, bind, interleave, local.
See man 2 set_mempolicy for details on each policy.
Overall NUMA policy actually consists of two parts. Policy itself and
bitmask representing NUMA nodes where is policy effective. Node mask can
be specified using related option, NUMAMask. Default mask can be
overwritten on per-service level.
Man page generation is generally very slow. I prefer to use -Dman=false when
developing systemd, and only build specific pages when introducing changes.
Those two little helper tools make it easy:
$ build/man/man systemd.link
$ build/man/html systemd.link
will show systemd.link.8 and systemd.link.html from the build directory build/.
Unfortunately the warning must be known, or otherwise the pragma generates a
warning or an error. So let's do a meson check for it.
Is it worth doing this to silence the warning? I think so, because apparently
the warning was already emitted by gcc-8.1, and with the recent push in gcc to
catch more such cases, we'll most likely only get more of those.
Same motivation as in other places: let's use a single logic to parse this.
Use path_equal() to compare the path.
A bug in error handling is fixed: if we failed after the GREEDY_REALLOC but
before the line that sets the last item to NULL, we would jump to
_cleanup_strv_free_ with the strv unterminated. Let's use GREEDY_REALLOC0
to avoid the issue.
Ld's man page says the following:
-u symbol
--undefined=symbol
Force symbol to be entered in the output file as an undefined symbol. Doing
this may, for example, trigger linking of additional modules from standard
libraries. -u may be repeated with different option arguments to enter
additional undefined symbols. This option is equivalent to the "EXTERN"
linker script command.
If this option is being used to force additional modules to be pulled into
the link, and if it is an error for the symbol to remain undefined, then the
option --require-defined should be used instead.
This would imply that it always requires an argument, which this does not
pass. Thus it will grab the next argument on the command line as its
argument. Before it took one of the many -lrt args (presumably) and now it
grabs something other random linker argument and things break.
[zj: this line was added in the first version of the meson configuration back
in 5c23128dab. AFAICT, this was a mistake. No
such flag appeared in Makefile.am at the time.]
https://github.com/mesonbuild/meson/issues/5113
With assertions disabled, we'd get a bunch of warnings that really bring no
value. With this change, a default meson build with -Db_ndebug=true generates
no warnings.
Due to this specific change: d0b6a10#diff-0203416587516c224c8fcfe8129e7caeR8,
systemd-nspawn uses libseccomp now if it is available. We we need to pass -I/usr/include
/libseccomp (or wherever seccomp.h is located) when compiling systemd-nspawn because
nspawn-settings.h does #include <seccomp.h>.
Fixes: #12060
Setting an access mode != 0666 is explicitly supported via -Dgroup-render-mode
In such a case, re-add the uaccess tag.
This is basically the same change that was done for /dev/kvm in
commit fa53e24130 and
ace5e3111c
and partially reverts the changes from
4e15a7343c
This avoids double compilation. Those files are tiny, so it doesn't save time,
but we avoid repeated warnings and errors, and it's generally cleaner to it
this way.
The number of commands in 'ninja -C build clean && ninja -C build' drops from
1462 to 1455 for me.
By defining rootprefix= we avoid a double slash in $systemdsystemunitdir and
other variables. This fixes a regression introduced in
1c2c7c6cb3 where the variables using rootprefix=/
would start with a double slash. This should be interpreted the same, but is
certainly ugly.
The rootprefix variable was added to systemd.pc in
1c2c7c6cb3, so there is no question of backwards
compatiblity. If people try to "override" the prefix and specify
--define-variable=rootprefix=/, they will get a double slash, which should be
OK, and is the same as --define-variable=rootprefix=/something/, which also
results in a double slash somewhere in the strings.
Let's move the shutdown binary into its own subdirectory in
src/shutdown, after all it is relatively isolated from the normal PID 1
sources, being a different binary and all.
Unfortunately it's not possible to move some of the code, since it is
shared with PID 1, that I wished we could move, but I still think it's
worth it.
Clang includes -W#warning in -Werror, so the #warning used for msan would
be an error.
v2:
- use -Wno-error=... so that the warning is still emitted, but not as an error.
Setting -fPIE globally can lead to miscompilations on certain
architectures.
This is caused by both -fPIE and -fPIC options being added to various
compilation commands. Only -fPIC is being recorded in the LTO options
section of the object. The gcc-8 LTO plugin merges -fPIC + -fPIE to
nothing. So, the compilations done by the plugin are not
position-independent and fail to link with -pie.
The simplest solution is to stop setting -fPIE globally and instead
using meson's b_pie=true option. This requires meson 0.49 or later.
Since we don't set this option in meson.build but leave it up to the
distro maintainer to set this option, do not bump the meson version
requirement.
Fixes: #10548
This reverts commit 0c2e93b863.
This should not be necessary anymore after previous commit.
I don't quite remember what sequence of steps was failing, but right now
"meson build -Dslow-tests=true && ninja -C build fuzzers" work fine.
This uses a {% for %} loop in Jekyll to render the page, from the "title"
information in the Front Matter of the actual page files.
This also makes `make-index-md` build rule unnecessary, since generation is
done by the template engine itself.
Tested this by running Jekyll locally.
This is supposed an error when building fuzzers for sanitization (that is a
nested build with the sanitization options):
In file included from ../../../../src/basic/util.c:21:0:
../../../../src/basic/build.h:4:21: fatal error: version.h: No such file or directory
#include "version.h"
^
compilation terminated.
Internally we do 'ninja -C test/fuzz/sanitize-address-fuzzers fuzzers'.
I'm not quite sure why version.h is not built in this case. But declaring
version_h as the dependency forces it to be built and solves the issue.
It would be better to define the dependency on individual exe's, but this
doesn't work:
meson.build:2884:8: ERROR: Argument is of an unacceptable type 'CustomTarget'.
Must be either an external dependency (returned by find_library() or
dependency()) or an internal dependency (returned by declare_dependency()).
Let's treat this a hack for another hack, which the nested build is.
This will be useful when building distro packages, because we can set the
version string to the rpm/dpkg/whatever version string, and getter reports
from end users.
$ build/systemctl --version
systemd 239-3555-g6178cbb5b5
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid
$ git tag v240 -m 'v240'
$ ninja -C build
ninja: Entering directory `build'
[76/76] Linking target fuzz-unit-file.
$ build/systemctl --version
systemd 240
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid
This is very useful during development, because a precise version string is
embedded in the build product and displayed during boot, so we don't have to
guess answers for questions like "did I just boot the latest version or the one
from before?".
This change creates an overhead for "noop" builds. On my laptop, 'ninja -C
build' that does nothing goes from 0.1 to 0.5 s. It would be nice to avoid
this, but I think that <1 s is still acceptable.
Fixes#7183.
PACKAGE_VERSION is renamed to GIT_VERSION, to make it obvious that this is the
more dynamically changing version string.
Why save to a file? It would be easy to generate the version tag using
run_command(), but we want to go through a file so that stuff gets rebuilt when
this file changes. If we just defined an variable in meson, ninja wouldn't know
it needs to rebuild things.
Let's not use atoi() if we can simply provide the project version as a number.
In C code, this is the numerical project version. In substitutions in other
files, this is just the bare substitution.
The "PACKAGE_" prefix is from autotools, and is strange. We call systemd a
"project", and "package" is something that distros build. Let's rename.
PACKAGE_URL is renamed to PROJECT_URL for the same reasons and for consistency.
(This leave PACKAGE_VERSION as the stringified define for C code.)
PACKAGE_VERSION is more explicit, and also, we don't pretend that changing the
project name in meson.build has any real effect. "systemd" is embedded in a
thousand different places, so let's just use the hardcoded string consistently.
This is mostly in preparation for future changes.
This is useful for distributions, where the stability of interface names should
be preseved after an upgrade of systemd. So when some specific release of the
distro is made available, systemd defaults to the latest & greatest naming
scheme, and subsequent updates set the same default. This default may still
be overriden through the kernel and env var options.
A special value "latest" is also allowed. Without a specific name, it is harder
to verride from meson. In case of 'combo' options, meson reads the default
during the initial configuration, and "remembers" this choice. When systemd is
updated, old build/ directories could keep the old default, which would be
annoying. Hence, "latest" is introduced to make it explicit, yet follow the
upstream. This is actually useful for the user too, because it may be used
as an override, without having to actually specify a version.
add new "systemd-run-generator" for running arbitrary commands from the kernel command line as system services using the "systemd.run=" kernel command line switch
This is really useful for running commands like this:
# systemd-run -i someimage.raw -b systemd.run='"some command line"'
This will now run the command line inside a small Type=oneshot service
and even propagate the exit code of the command back to the parent. And
all that with the full system booted up.
By default this causes the system to shutdown right after the command
completed, but this can be tweaked with systemd.run_success_action= and
systemd.run_failure_action=.
Note that when used in VMs the exit status can of course not be
propagate, as VMs don't really know a concept for that.
Fixes: #2728
This is also supposed to be preparation for doing #10234 eventually,
where a very similar operation is requested: instead of importing a tree
to /var/lib/machines it would need to be imported into
/var/lib/portables/.
This doesn't have much effect on the final build, because we link libbasic.a
into libsystemd-shared.so, so in the end, all the object built from basic/
end up in libsystemd-shared. And when the static library is linked into binaries,
any objects that are included in it but are not used are trimmed. Hence, the
size of output artifacts doesn't change:
$ du -sb /var/tmp/inst*
54181861 /var/tmp/inst1 (old)
54207441 /var/tmp/inst1s (old split-usr)
54182477 /var/tmp/inst2 (new)
54208041 /var/tmp/inst2s (new split-usr)
(The negligible change in size is because libsystemd-shared.so is bigger
by a few hundred bytes. I guess it's because symbols are named differently
or something like that.)
The effect is on the build process, in particular partial builds. This change
effectively moves the requirements on some build steps toward the leaves of the
dependency tree. Two effects:
- when building items that do not depend on libsystemd-shared, we
build less stuff for libbasic.a (which wouldn't be used anyway,
so it's a net win).
- when building items that do depend on libshared, we reduce libbasic.a as a
synchronization point, possibly allowing better parallelism.
Method:
1. copy list of .h files from src/basic/meson.build to /tmp/basic
2. $ for i in $(grep '.h$' /tmp/basic); do echo $i; git --no-pager grep "include \"$i\"" src/basic/ 'src/lib*' 'src/nss-*' 'src/journal/sd-journal.c' |grep -v "${i%.h}.c";echo ;done | less
Fixes#4549.
People want to be able to redefine the prefixes relative to which the other
variables are defined. Something like
pkgconf --define-variable=prefix=/home/user/installpath --variable=systemdsystemunitdir systemd
I'm not convinced that this entirely useful, because the installed systemd will
not look at those paths, but maybe it's OK as an alternative type of $DESTDIR.
This has been requested a few times over the years, so let's just provide this.
I thought this would be more complicated, since we allow all kinds of directories
to be overrides in the compilation configuration. But it turns out that all the
directories defined in systemd.pc are relative to three prefixes:
$prefix, $rootprefix, and $sysconfdir. So this patch adds $rootprefix and $sysconfdir
to the .pc file and then changes the subsequent definitions in the .pc file to use
them. In the end we define each path twice using the same rules: once in meson.build
and once in the .pc file.
Without overrides:
$ for i in $(pkgconf --with-path=build/src/core systemd --print-variables); do
echo -n "$i = "; pkgconf --with-path=$PWD/build/src/core --variable=$i systemd
done
containeruidbasemax = 1878982656
containeruidbasemin = 524288
dynamicuidmax = 65519
dynamicuidmin = 61184
systemgidmax = 999
systemuidmax = 999
catalogdir = /usr/lib/systemd/catalog
modulesloaddir = /usr/lib/modules-load.d
binfmtdir = /usr/lib/binfmt.d
sysctldir = /usr/lib/sysctl.d
sysusersdir = /usr/lib/sysusers.d
tmpfilesdir = /usr/lib/tmpfiles.d
systemdshutdowndir = /usr/lib/systemd/system-shutdown
systemdsleepdir = /usr/lib/systemd/system-sleep
systemdusergeneratordir = /usr/lib/systemd/user-generators
systemdsystemgeneratordir = /usr/lib/systemd/system-generators
systemduserunitpath = /etc/systemd/user:/etc/systemd/user:/run/systemd/user:/usr/local/lib/systemd/user:/usr/local/share/systemd/user:/usr/lib/systemd/user:/usr/lib/systemd/user:/usr/share/systemd/user
systemdsystemunitpath = /etc/systemd/system:/etc/systemd/system:/run/systemd/system:/usr/local/lib/systemd/system:/usr/lib/systemd/system:/usr/lib/systemd/system:/lib/systemd/system
systemduserconfdir = /etc/systemd/user
systemdsystemconfdir = /etc/systemd/system
systemduserpresetdir = /usr/lib/systemd/user-preset
systemduserunitdir = /usr/lib/systemd/user
systemdsystempresetdir = /usr/lib/systemd/system-preset
systemdsystemunitdir = /usr/lib/systemd/system
systemdutildir = /usr/lib/systemd
sysconfdir = /etc
rootprefix = /usr
prefix = /usr
pcfiledir = /usr/share/pkgconfig
With overrides:
$ for i in $(pkgconf --with-path=build/src/core systemd --print-variables); do
echo -n "$i = "; pkgconf --with-path=$PWD/build/src/core \
--define-variable=prefix=/PREFIX \
--define-variable=rootprefix=/ROOTPREFIX \
--define-variable=sysconfdir=/SYSCONF --variable=$i systemd
done
containeruidbasemax = 1878982656
containeruidbasemin = 524288
dynamicuidmax = 65519
dynamicuidmin = 61184
systemgidmax = 999
systemuidmax = 999
catalogdir = /PREFIX/lib/systemd/catalog
modulesloaddir = /PREFIX/lib/modules-load.d
binfmtdir = /PREFIX/lib/binfmt.d
sysctldir = /PREFIX/lib/sysctl.d
sysusersdir = /PREFIX/lib/sysusers.d
tmpfilesdir = /PREFIX/lib/tmpfiles.d
systemdshutdowndir = /ROOTPREFIX/lib/systemd/system-shutdown
systemdsleepdir = /ROOTPREFIX/lib/systemd/system-sleep
systemdusergeneratordir = /PREFIX/lib/systemd/user-generators
systemdsystemgeneratordir = /ROOTPREFIX/lib/systemd/system-generators
systemduserunitpath = /SYSCONF/systemd/user:/etc/systemd/user:/run/systemd/user:/usr/local/lib/systemd/user:/usr/local/share/systemd/user:/PREFIX/lib/systemd/user:/usr/lib/systemd/user:/usr/share/systemd/user
systemdsystemunitpath = /SYSCONF/systemd/system:/etc/systemd/system:/run/systemd/system:/usr/local/lib/systemd/system:/ROOTPREFIX/lib/systemd/system:/usr/lib/systemd/system:/lib/systemd/system
systemduserconfdir = /SYSCONF/systemd/user
systemdsystemconfdir = /SYSCONF/systemd/system
systemduserpresetdir = /PREFIX/lib/systemd/user-preset
systemduserunitdir = /PREFIX/lib/systemd/user
systemdsystempresetdir = /ROOTPREFIX/lib/systemd/system-preset
systemdsystemunitdir = /ROOTPREFIX/lib/systemd/system
systemdutildir = /usr/lib/systemd
sysconfdir = /SYSCONF
rootprefix = /ROOTPREFIX
prefix = /PREFIX
pcfiledir = /usr/share/pkgconfig
(pkgconf doesn't provide a way to print all variables together with their definitions,
according to the man page. Disappointing.)
Assigning multiple variables in one line is no valid meson syntax.
Without this running meson with -Ddns-over-tls=false fails with:
meson.build:1191:8: ERROR: Tried to assign an invalid value to variable.
Fuzzers are just special tests anyways and without this, building with
'-Dtests=false' fails with:
.../src/fuzz/fuzz-main.c:20: undefined reference to `test_setup_logging'
lz4-r130 was released on May 29th, 2015. Let's drop the work-around for older
versions. In particular, we won't test any new code against those ancient
releases, so we shouldn't pretend they are supported.
This is might be useful in some cases, but it's primarily an example for
a boot check service that can be plugged before boot-complete.target.
It's disabled by default.
All it does is check whether the failed unit count is zero
This is the counterpiece to the boot counting implemented in
systemd-boot: if a boot is detected as successful we mark drop the
counter again from the booted snippet or kernel image.
After discussions with kernel folks, a system with memcg really
shouldn't need extra hard limits on file descriptors anymore, as they
are properly accounted for by memcg anyway. Hence, let's bump these
values to their maximums.
This also adds a build time option to turn thiss off, to cover those
users who do not want to use memcg.
I think this is a slightly cleaner approach than parsing the
configuration file at multiple places, as this way there's only a single
reload cycle for logind.conf, and that's systemd-logind.service's
runtime.
This means that logind and dbus become a requirement of
user-runtime-dir, but given that XDG_RUNTIME_DIR is not set anyway
without logind and dbus around this isn't really any limitation.
This also simplifies linking a bit as this means user-runtime-dir
doesn't have to link against any code of logind itself.
This reverts commit 56f56d5ad8.
This broke the compilation for coverity under travis. Our build script does
something like this:
$ CFLAGS='-D_Float128=long\ double -D_Float64=double -D_Float64x=long\ double -D_Float32=float -D_Float32x=double' meson cov-build -Dman=false
$ ninja -C build
...
[pid 27096] execve("/usr/bin/cc", ["/usr/bin/cc", "-D_Float128=long", "double", "-D_Float64=double", "-D_Float64x=long", "double", "-D_Float32=float", "-D_Float32x=double", "-E", "-dM", "-include", "linux/capability.h", "-include", "config.h", "-include", "../src/basic/missing.h", "-"], 0x55ab75ea4e80 /* 91 vars */) = 0
cc: error: double: No such file or directory
cc: error: double: No such file or directory
[pid 27096] +++ exited with 1 +++
I'm sure this could be fixed somehow, but since the original motivation for
56f56d5ad8 wasn't very strong, let's just revert
it as this seems to be the simplest solution.
Mempool use is enabled or disabled based on the mempool_use_allowed symbol that
is linked in.
Should fix assert crashes in external programs caused by #9792.
Replaces #10286.
v2:
- use two different source files instead of a gcc constructor
The raison d'etre for this program is printing machine-app-specific IDs. We
provide a library function for that, but not a convenient API. We can hardly
ask people to quickly hack their own C programs or call libsystemd through CFFI
in python or another scripting language if they just want to print an ID.
Verb 'new' was already available as 'journalctl --new-id128', but this makes
it more discoverable.
v2:
- rename binary to systemd-id128
- make --app-specific= into a switch that applies to boot-id and machine-id
318/365 fuzz-bus-message:crash-26bba7182dedc8848939931d9fcefcb7922f2e56:address OK 0.03 s
319/365 fuzz-bus-message:crash-29ed3c202e0ffade3cad42c8bbeb6cc68a21eb8e:address OK 0.03 s
320/365 fuzz-bus-message:crash-b88ad9ecf4aacf4a0caca5b5543953265367f084:address OK 0.03 s
321/365 fuzz-bus-message:crash-c1b37b4729b42c0c05b23cba4eed5d8102498a1e:address OK 0.03 s
322/365 fuzz-bus-message:crash-d8f3941c74219b4c03532c9b244d5ea539c61af5:address OK 0.03 s
323/365 fuzz-bus-message:crash-e1b811da5ca494e494b77c6bd8e1c2f2989425c5:address OK 0.03 s
324/365 fuzz-bus-message:leak-c09c0e2256d43bc5e2d02748c8d8760e7bc25d20:address OK 0.04 s
325/365 fuzz-bus-message:message1:address OK 0.03 s
326/365 fuzz-bus-message:timeout-08ee8f6446a4064db064e8e0b3d220147f7d0b5b:address OK 0.03 s
327/365 fuzz-dhcp-server:discover-existing:address OK 0.04 s
328/365 fuzz-dhcp-server:discover-new:address OK 0.03 s
329/365 fuzz-dhcp-server:release:address OK 0.04 s
330/365 fuzz-dhcp-server:request-existing:address OK 0.03 s
331/365 fuzz-dhcp-server:request-new:address OK 0.03 s
332/365 fuzz-dhcp-server:request-reboot:address OK 0.03 s
333/365 fuzz-dhcp-server:request-renew:address OK 0.03 s
334/365 fuzz-dns-packet:issue-7888:address OK 0.03 s
335/365 fuzz-dns-packet:oss-fuzz-5465:address OK 0.03 s
336/365 fuzz-journal-remote:crash-5a8f03d4c3a46fcded39527084f437e8e4b54b76:address OK 0.06 s
337/365 fuzz-journal-remote:crash-96dee870ea66d03e89ac321eee28ea63a9b9aa45:address OK 0.04 s
338/365 fuzz-journal-remote:invalid-ts.txt:address OK 0.04 s
339/365 fuzz-journal-remote:oss-fuzz-8659:address OK 0.06 s
340/365 fuzz-journal-remote:oss-fuzz-8686:address OK 0.04 s
341/365 fuzz-journal-remote:sample.txt:address OK 0.07 s
342/365 fuzz-unit-file:directives.service:address OK 0.03 s
343/365 fuzz-unit-file:empty.scope:address OK 0.04 s
344/365 fuzz-unit-file:machine.slice:address OK 0.03 s
345/365 fuzz-unit-file:oss-fuzz-6884:address OK 0.05 s
346/365 fuzz-unit-file:oss-fuzz-6885:address OK 0.03 s
347/365 fuzz-unit-file:oss-fuzz-6886:address OK 0.04 s
348/365 fuzz-unit-file:oss-fuzz-6892:address OK 0.03 s
349/365 fuzz-unit-file:oss-fuzz-6897:address OK 0.05 s
350/365 fuzz-unit-file:oss-fuzz-6897-evverx:address OK 0.04 s
351/365 fuzz-unit-file:oss-fuzz-6908:address OK 0.05 s
352/365 fuzz-unit-file:oss-fuzz-6917:address OK 0.06 s
353/365 fuzz-unit-file:oss-fuzz-6977:address OK 0.08 s
354/365 fuzz-unit-file:oss-fuzz-6977-unminimized:address OK 0.10 s
355/365 fuzz-unit-file:oss-fuzz-7004:address OK 0.03 s
356/365 fuzz-unit-file:oss-fuzz-8064:address OK 0.03 s
357/365 fuzz-unit-file:oss-fuzz-8827:address OK 0.50 s
358/365 fuzz-unit-file:proc-sys-fs-binfmt_misc.automount:address OK 0.03 s
359/365 fuzz-unit-file:syslog.socket:address OK 0.03 s
360/365 fuzz-unit-file:systemd-ask-password-console.path:address OK 0.03 s
361/365 fuzz-unit-file:systemd-machined.service:address OK 0.03 s
362/365 fuzz-unit-file:systemd-resolved.service:address OK 0.03 s
363/365 fuzz-unit-file:systemd-tmpfiles-clean.timer:address OK 0.03 s
364/365 fuzz-unit-file:timers.target:address OK 0.03 s
365/365 fuzz-unit-file:var-lib-machines.mount:address OK 0.04 s
This gives us slightly nicer coverage in the normal test run.
When in a git repo, git ls-files is used to get a list of files known to git.
This mirrors what update-man-rules does for man files. Only looking at files
known to git makes it easier to not forget to commit the test file to git,
and also makes bisecting easier if some files are left in repo.
When outside of a git repo, we expect to be unpacked from a tarball, so just
using all files reported by ls is OK.
In the main meson.build file, .source_root() and .current_source_dir() are
equivalent, but it seems more appropriate to use .source_root() when we are appending
a path which is by design relative to repo root.
The justification is the same as for -Dvalgrind: setting config in
meson in this way is easier, because when the value is changed stuff
that should be rebuilt is rebuilt.
There isn't really much need to keep them separate. Anything which is a good
corpus entry can be used as a smoke test, and anything which which is a
regression test can just as well be inserted into the corpus.
The only functional difference from this patch (apart from different paths in
output) is that the regression tests are now zipped together with the rest of
the corpus.
$ meson configure build -Dslow-tests=true && ninja -C build test
...
307/325 fuzz-dns-packet:issue-7888:address OK 0.06 s
308/325 fuzz-dns-packet:oss-fuzz-5465:address OK 0.04 s
309/325 fuzz-journal-remote:crash-5a8f03d4c3a46fcded39527084f437e8e4b54b76:address OK 0.07 s
310/325 fuzz-journal-remote:crash-96dee870ea66d03e89ac321eee28ea63a9b9aa45:address OK 0.05 s
311/325 fuzz-journal-remote:oss-fuzz-8659:address OK 0.05 s
312/325 fuzz-journal-remote:oss-fuzz-8686:address OK 0.07 s
313/325 fuzz-unit-file:oss-fuzz-6884:address OK 0.06 s
314/325 fuzz-unit-file:oss-fuzz-6885:address OK 0.05 s
315/325 fuzz-unit-file:oss-fuzz-6886:address OK 0.05 s
316/325 fuzz-unit-file:oss-fuzz-6892:address OK 0.05 s
317/325 fuzz-unit-file:oss-fuzz-6897:address OK 0.05 s
318/325 fuzz-unit-file:oss-fuzz-6897-evverx:address OK 0.06 s
319/325 fuzz-unit-file:oss-fuzz-6908:address OK 0.07 s
320/325 fuzz-unit-file:oss-fuzz-6917:address OK 0.07 s
321/325 fuzz-unit-file:oss-fuzz-6977:address OK 0.13 s
322/325 fuzz-unit-file:oss-fuzz-6977-unminimized:address OK 0.12 s
323/325 fuzz-unit-file:oss-fuzz-7004:address OK 0.05 s
324/325 fuzz-unit-file:oss-fuzz-8064:address OK 0.05 s
325/325 fuzz-unit-file:oss-fuzz-8827:address OK 0.52 s
Yes, there are still a lot of users of bzip2, but it's fallen out of
favour after LZMA/xz, which can compress a lot more and often
decompresses faster than bzip2 too.
Back in 08318a2c5a, value "false" was enabled for
'-Dtests=', but various tests were not conditionalized properly. So even with
-Dtests=false -Dslow-tests=false we'd run 120 tests. Let's make this consistent.
We would have a strange situation where after setting -Dslow-tests=true -Dtests=false
we'd get mostly the slow tests (plus some other ones which I'll fix in
subsequent commit). Let's simplify things by making -Dtests=false just
disable those tests too.
This makes it so that tests no longer need to know the absolute paths to the
source and build dirs, instead using the systemd-runtest.env file to get these
paths when running from the build tree.
Confirmed that test-catalog works on `ninja test`, when called standalone and
also when the environment file is not present, in which case it will use the
installed location under /usr/lib/systemd/catalog.
The location can now also be overridden for this test by setting the
$SYSTEMD_CATALOG_DIR environment variable.
This simplifies get_testdata_dir() to simply checking for an environment
variable, with an additional function to locate a systemd-runtest.env file in
the same directory as the test binary and reading environment variable
assignments from that file if it exists.
This makes it possible to:
- Run `ninja test` from the build dir and have it use ${srcdir}/test for
test unit definitions.
- Run a test directly, such as `build/test-execute` and have it locate
them correctly.
- Run installed tests (from systemd-tests package) and locate the test
units in the installed location (/usr/lib/systemd/tests/testdata), in
which case the absence of the systemd-runtest.env file will have
get_testdata_dir() use the installed location hardcoded into the
binaries.
Explicit setting of $SYSTEMD_TEST_DATA still overrides the contents of
systemd-runtest.env.
Starting with meson 0.46, it is able to detect these argument correctly.
See this commit in meson codebase for more details:
695b8f3a03
We already carry a requirement for meson_version : '>= 0.46', so we can be sure
our build system will include this commit.
Tested by building systemd using a cloned meson synced to the 0.46.0 tag,
confirmed the warnings were detected correctly in that case. The meson messages included this snippet:
> Compiler for C supports arguments -Wno-unused-parameter -Wunused-parameter: YES
> Compiler for C supports arguments -Wno-missing-field-initializers -Wmissing-field-initializers: YES
> Compiler for C supports arguments -Wno-unused-result -Wunused-result: YES
> Compiler for C supports arguments -Wno-format-signedness -Wformat-signedness: YES
> Compiler for C supports arguments -Wno-error=nonnull -Werror=nonnull: YES
> Compiler for C supports arguments -Wno-maybe-uninitialized -Wmaybe-uninitialized: YES
The docs/ directory is special in GitHub, since it can be used to serve GitHub
Pages from, so there's a benefit to switching to it in order to expose it
directly as a website.
Updated references to it from the documentations themselves, from the
CONTRIBUTING.md file and from Meson build files.
Compiler flag -Wmaybe-uninitialized is quite noisy and produces many false
positives, especially when optimization flags are enabled (tested gcc 8.2.1),
so let's just disable it in systemd build.
For example, with CFLAGS=-O2, the build produces 11 such warnings and the
default CFLAGS of Fedora's rpmbuild warns about it in 176 places. A look at a
sample of those shows that most are false positives, where the compiler just
can't figure it out correctly. (While fixing those would be nice, I'm not sure
it's a good use of our time.)
The noisy [-Wmaybe-uninitialized] warnings are not just an annoyance, since
they make it harder to spot warnings that indicate actual problems (such as
variable declared but not used.) Silencing those is beneficial, so that
contributors would see warnings where there are actually actionable problems,
so there's a better chance of having those issues addressed before a PR is
pushed.
Tested:
$ CFLAGS='-O2 -Wp,-D_FORTIFY_SOURCE=2' meson build/
$ ninja -C build/
(NOTE: -Wp,-D_FORTIFY_SOURCE=2 prevents [-Wstringop-truncation] warnings.)
With the commands above, the build will not produce any [-Wmaybe-uninitialized]
warnings (or any other warnings), which is not really the case before this commit.
Also tested with rpmbuild on Fedora, after this commit there are no warnings
produced in the build step.
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/
networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/
Example conf:
/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
```
/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```
$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Meson does not care either way, so let's use the simpler syntax. And files()
already gives a list, so nesting this in a list wouldn't be necessary even
if meson did not flatten everything.
This provides basic OpenSSL support without optimizations like TCP Fast Open and TLS Session Tickets.
Notice only a single SSL library can be enabled at a time and therefore journald functions provided by GnuTLS will be disabled when using OpenSSL.
Fixes#9531
This bumps the minimum required version of meson to 0.45 and
python to 3.5, as integer type option is supported since meson-0.45
and meson-0.45 requires python-3.5.
This adds -Dnss-resolve= and -Dnss-mymachines= meson options.
By using this option, e.g., resolved can be built without nss-resolve.
When no nss modules are built, then test-nss is neither built.
Also, This changes the option name -Dmyhostname= to -Dnss-myhostname=
for consistency to other nss related options.
Closes#9596.
Using `getent' and `id' command in case of cross compiling does not
make much sense. This is because it is the host files that are checked.
Besides, in some restricted cross compilation environment, these two
command may not even be available. This is to avoid host comtamination.
So we should only check the validity using getent and id when not
cross compiling.
key_serial_t is defined in keyutil.h, which wasn't included in the header list
in the test, so the test always failed. We were always compiling stuff with
!HAVE_KEY_SERIAL_T.
We could try to add keyutil.h to the test, but then we'd have to first check if
it is available, which just doesn't seem worth the trouble.
key_serial_t should always be defined as int32_t. Let's keep the uncoditional
define, since repeated compatible typedefs are not a problem, and it allows us
to compile even if the header file is missing. If there's ever a change in the
definition, we'll have to adjust the code for the different type anyway, and
our compiler will tell us.
Using _GNU_SOURCE is better because that's how we include the headers in the
actual build, and some headers define different stuff when it is defined.
sys/stat.h for example defines 'struct statx' conditionally.
Starting with glibc 2.27.9000-36.fc29, include file sys/stat.h will have a
definition for struct statx, in which case include file linux/stat.h should be
avoided, in order to prevent a duplicate definition.
In file included from ../src/basic/missing.h:18,
from ../src/basic/util.h:28,
from ../src/basic/hashmap.h:10,
from ../src/shared/bus-util.h:12,
from ../src/libsystemd/sd-bus/bus-creds.c:11:
/usr/include/linux/stat.h:99:8: error: redefinition of ‘struct statx’
struct statx {
^~~~~
In file included from /usr/include/sys/stat.h:446,
from ../src/basic/util.h:19,
from ../src/basic/hashmap.h:10,
from ../src/shared/bus-util.h:12,
from ../src/libsystemd/sd-bus/bus-creds.c:11:
/usr/include/bits/statx.h:36:8: note: originally defined here
struct statx
^~~~~
Extend our meson.build to look for struct statx when only sys/stat.h is
included and, in that case, do not include linux/stat.h anymore.
Tested that systemd builds correctly when using a glibc version that includes a
definition for struct statx.
glibc Fedora RPM update:
28cb5d31fc
glibc upstream commit:
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=fd70af45528d59a00eb3190ef6706cb299488fcd
This fixes the following warning:
```
meson.build:1140: WARNING: Trying to compare values of different types (DependencyHolder, list) using !=.
The result of this is undefined and will become a hard error in a future Meson release.
```
Follow-up for f02582f69fe1e7663a87ba80bd4f90d5d23ee75f(#9410).
../src/test/test-sizeof.c: In function ‘main’:
../src/test/test-sizeof.c:70:24: error: result of ‘1 << 31’ requires 33 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
X = (1 << 31),
^~
cc1: some warnings being treated as errors
Follow-up for b05ecb8cad.
The primary motivation is to catch enum values created through a shift that is
too big:
../src/test/test-sizeof.c:26:29: error: left shift count >= width of type [-Werror=shift-count-overflow]
enum_with_shift = 1 << 32,
^~
cc1: some warnings being treated as errors
The compiler will now reject those.
This is an alternative to #9224.
We already allowed variables to be declared in the middle of a function
(whenever a new scope was opened), so this isn't such a big change. Sometimes
we would open a scope just to work around this prohibition.
But sometimes the code can be much clearer if the variable is declared
somewhere in the middle of a scope, in particular if the declaration is
combined with initialization or acquisition of some resources. So let's allow
this, but keep things in the old style, unless there's a good reason to move
the variable declaration to a different place.
Systemctl is special because it is required for many tasks that may need to
be performed when the system is not fully configured and/or partially
broken:
1. Installing/Uninstalling services during OS installs and upgrades
2. Shutting down the system
Therefore reduce the number of dependencies that systemctl pulls in, by
not linking to systemd-shared. This brings a bit of resilience to
systemctl (and its aliases shutdown, reboot, etc), by linking against
less external libraries.
Because this extra resilience comes at a cost of approximately 580 KB
extra space, this is done behind a meson build option.
This is in preparation to reusing the RemoteServer in other concepts.
I tried to keep changes to minimum:
- arg_* global variables are now passed as state in RemoteServer
- exported functions get the "journal_remote_" prefix
- some variables are renamed
In particular, there is an ugly global RemoveServer* variable. It was originally
added because µhttpd did not allow state to be passed to the callbacks. I'm not
sure if this has been remediated in µhttpd, but either way, this is not changed
here, the global variable is only renamed for clarity.
This makes it easier to link the nspawn implementation to the tests.
Right now this just means that nspawn-patch-uid.c is not compiled
twice, which is nice, but results in test-patch-uid being slightly bigger,
which is not nice. But in general, we should use convenience libs to
compile everything just once, as far as possible. Otherwise, once we
start compiling a few files here twice, and a few file there thrice, we
soon end up in a state where we are doing hundreds of extra compilations.
So let's do the "right" thing, even if is might not be more efficient.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
In https://github.com/systemd/systemd/pull/6561, `run_target`
was changed to `custom_target`, which inadvertently caused
relative paths to be passed to ctags due to
https://github.com/mesonbuild/meson/issues/3589.
The switch to `run_target` causes absolute paths to be
passed again and makes it easier to jump from file to
file, hopefully delaying the need to exit Vim :-)
Configuration through environment variable is inconvenient with meson, because
they cannot be convieniently changed and/or are not preserved during
reconfiguration (https://github.com/mesonbuild/meson/issues/1503).
This adds -Dvalgrind=true/false, which has the advantage that it can be set
at any time with meson configure -Dvalgrind=... and ninja will rebuild targets
as necessary. Additional minor advantages are better consistency with the
options for hashmap debugging, and typo avoidance with '#if' instead of '#ifdef'.
