Introduce support for configuring cpus and mems for processes using cgroup v2 CPUSET controller. This allows users to limit which cpus and memory NUMA nodes can be used by processes to better utilize system resources. The cgroup v2 interfaces to control it are cpuset.cpus and cpuset.mems where the requested configuration is written. However, it doesn't mean that the requested configuration will be actually used as parent cgroup may limit the cpus or mems as well. In order to reflect the real configuration cgroup v2 provides read-only files cpuset.cpus.effective and cpuset.mems.effective which are exported to users as well.
9.2 KiB
title |
---|
What settings are currently available for transient units? |
What settings are currently available for transient units?
Our intention is to make all settings that are available as unit file settings also available for transient units, through the D-Bus API. At the moment, some unit types (device, swap, target) are not supported at all via unit types, but most others are pretty well supported, with some notable omissions.
The lists below contain all settings currently available in unit files. The
ones currently available in transient units are prefixed with ✓
.
Generic Unit Settings
Most generic unit settings are available for transient units.
✓ Description=
✓ Documentation=
✓ SourcePath=
✓ Requires=
✓ Requisite=
✓ Wants=
✓ BindsTo=
✓ Conflicts=
✓ Before=
✓ After=
✓ OnFailure=
✓ PropagatesReloadTo=
✓ ReloadPropagatedFrom=
✓ PartOf=
✓ JoinsNamespaceOf=
✓ RequiresMountsFor=
✓ StopWhenUnneeded=
✓ RefuseManualStart=
✓ RefuseManualStop=
✓ AllowIsolate=
✓ DefaultDependencies=
✓ OnFailureJobMode=
✓ IgnoreOnIsolate=
✓ JobTimeoutSec=
✓ JobRunningTimeoutSec=
✓ JobTimeoutAction=
✓ JobTimeoutRebootArgument=
✓ StartLimitIntervalSec=SECONDS
✓ StartLimitBurst=UNSIGNED
✓ StartLimitAction=ACTION
✓ FailureAction=
✓ SuccessAction=
✓ FailureActionExitStatus=
✓ SuccessActionExitStatus=
✓ AddRef=
✓ RebootArgument=STRING
✓ ConditionPathExists=
✓ ConditionPathExistsGlob=
✓ ConditionPathIsDirectory=
✓ ConditionPathIsSymbolicLink=
✓ ConditionPathIsMountPoint=
✓ ConditionPathIsReadWrite=
✓ ConditionDirectoryNotEmpty=
✓ ConditionFileNotEmpty=
✓ ConditionFileIsExecutable=
✓ ConditionNeedsUpdate=
✓ ConditionFirstBoot=
✓ ConditionKernelCommandLine=
✓ ConditionKernelVersion=
✓ ConditionArchitecture=
✓ ConditionVirtualization=
✓ ConditionSecurity=
✓ ConditionCapability=
✓ ConditionHost=
✓ ConditionACPower=
✓ ConditionUser=
✓ ConditionGroup=
✓ ConditionControlGroupController=
✓ AssertPathExists=
✓ AssertPathExistsGlob=
✓ AssertPathIsDirectory=
✓ AssertPathIsSymbolicLink=
✓ AssertPathIsMountPoint=
✓ AssertPathIsReadWrite=
✓ AssertDirectoryNotEmpty=
✓ AssertFileNotEmpty=
✓ AssertFileIsExecutable=
✓ AssertNeedsUpdate=
✓ AssertFirstBoot=
✓ AssertKernelCommandLine=
✓ AssertKernelVersion=
✓ AssertArchitecture=
✓ AssertVirtualization=
✓ AssertSecurity=
✓ AssertCapability=
✓ AssertHost=
✓ AssertACPower=
✓ AssertUser=
✓ AssertGroup=
✓ AssertControlGroupController=
✓ CollectMode=
Execution-Related Settings
All execution-related settings are available for transient units.
✓ WorkingDirectory=
✓ RootDirectory=
✓ RootImage=
✓ User=
✓ Group=
✓ SupplementaryGroups=
✓ Nice=
✓ OOMScoreAdjust=
✓ IOSchedulingClass=
✓ IOSchedulingPriority=
✓ CPUSchedulingPolicy=
✓ CPUSchedulingPriority=
✓ CPUSchedulingResetOnFork=
✓ CPUAffinity=
✓ UMask=
✓ Environment=
✓ EnvironmentFile=
✓ PassEnvironment=
✓ UnsetEnvironment=
✓ DynamicUser=
✓ RemoveIPC=
✓ StandardInput=
✓ StandardOutput=
✓ StandardError=
✓ StandardInputText=
✓ StandardInputData=
✓ TTYPath=
✓ TTYReset=
✓ TTYVHangup=
✓ TTYVTDisallocate=
✓ SyslogIdentifier=
✓ SyslogFacility=
✓ SyslogLevel=
✓ SyslogLevelPrefix=
✓ LogLevelMax=
✓ LogExtraFields=
✓ LogRateLimitIntervalSec=
✓ LogRateLimitBurst=
✓ SecureBits=
✓ CapabilityBoundingSet=
✓ AmbientCapabilities=
✓ TimerSlackNSec=
✓ NoNewPrivileges=
✓ KeyringMode=
✓ SystemCallFilter=
✓ SystemCallArchitectures=
✓ SystemCallErrorNumber=
✓ MemoryDenyWriteExecute=
✓ RestrictNamespaces=
✓ RestrictRealtime=
✓ RestrictSUIDSGID=
✓ RestrictAddressFamilies=
✓ LockPersonality=
✓ LimitCPU=
✓ LimitFSIZE=
✓ LimitDATA=
✓ LimitSTACK=
✓ LimitCORE=
✓ LimitRSS=
✓ LimitNOFILE=
✓ LimitAS=
✓ LimitNPROC=
✓ LimitMEMLOCK=
✓ LimitLOCKS=
✓ LimitSIGPENDING=
✓ LimitMSGQUEUE=
✓ LimitNICE=
✓ LimitRTPRIO=
✓ LimitRTTIME=
✓ ReadWritePaths=
✓ ReadOnlyPaths=
✓ InaccessiblePaths=
✓ BindPaths=
✓ BindReadOnlyPaths=
✓ TemporaryFileSystem=
✓ PrivateTmp=
✓ PrivateDevices=
✓ PrivateMounts=
✓ ProtectKernelTunables=
✓ ProtectKernelModules=
✓ ProtectControlGroups=
✓ PrivateNetwork=
✓ PrivateUsers=
✓ ProtectSystem=
✓ ProtectHome=
✓ MountFlags=
✓ MountAPIVFS=
✓ Personality=
✓ RuntimeDirectoryPreserve=
✓ RuntimeDirectoryMode=
✓ RuntimeDirectory=
✓ StateDirectoryMode=
✓ StateDirectory=
✓ CacheDirectoryMode=
✓ CacheDirectory=
✓ LogsDirectoryMode=
✓ LogsDirectory=
✓ ConfigurationDirectoryMode=
✓ ConfigurationDirectory=
✓ PAMName=
✓ IgnoreSIGPIPE=
✓ UtmpIdentifier=
✓ UtmpMode=
✓ SELinuxContext=
✓ SmackProcessLabel=
✓ AppArmorProfile=
✓ Slice=
Resource Control Settings
All cgroup/resource control settings are available for transient units
✓ CPUAccounting=
✓ CPUWeight=
✓ StartupCPUWeight=
✓ CPUShares=
✓ StartupCPUShares=
✓ CPUQuota=
✓ CPUQuotaPeriodSec=
✓ AllowedCPUs=
✓ AllowedMemoryNodes=
✓ MemoryAccounting=
✓ DefaultMemoryMin=
✓ MemoryMin=
✓ DefaultMemoryLow=
✓ MemoryLow=
✓ MemoryHigh=
✓ MemoryMax=
✓ MemorySwapMax=
✓ MemoryLimit=
✓ DeviceAllow=
✓ DevicePolicy=
✓ IOAccounting=
✓ IOWeight=
✓ StartupIOWeight=
✓ IODeviceWeight=
✓ IOReadBandwidthMax=
✓ IOWriteBandwidthMax=
✓ IOReadIOPSMax=
✓ IOWriteIOPSMax=
✓ BlockIOAccounting=
✓ BlockIOWeight=
✓ StartupBlockIOWeight=
✓ BlockIODeviceWeight=
✓ BlockIOReadBandwidth=
✓ BlockIOWriteBandwidth=
✓ TasksAccounting=
✓ TasksMax=
✓ Delegate=
✓ DisableControllers=
✓ IPAccounting=
✓ IPAddressAllow=
✓ IPAddressDeny=
Process Killing Settings
All process killing settings are available for transient units:
✓ SendSIGKILL=
✓ SendSIGHUP=
✓ KillMode=
✓ KillSignal=
✓ FinalKillSignal=
✓ WatchdogSignal=
Service Unit Settings
Most service unit settings are available for transient units.
✓ PIDFile=
✓ ExecCondition=
✓ ExecStartPre=
✓ ExecStart=
✓ ExecStartPost=
✓ ExecReload=
✓ ExecStop=
✓ ExecStopPost=
✓ RestartSec=
✓ TimeoutStartSec=
✓ TimeoutStopSec=
✓ TimeoutAbortSec=
✓ TimeoutSec=
✓ RuntimeMaxSec=
✓ WatchdogSec=
✓ Type=
✓ Restart=
✓ RootDirectoryStartOnly=
✓ RemainAfterExit=
✓ GuessMainPID=
✓ RestartPreventExitStatus=
✓ RestartForceExitStatus=
✓ SuccessExitStatus=
✓ NonBlocking=
✓ BusName=
✓ FileDescriptorStoreMax=
✓ NotifyAccess=
Sockets=
✓ USBFunctionDescriptors=
✓ USBFunctionStrings=
Mount Unit Settings
All mount unit settings are available to transient units:
✓ What=
✓ Where=
✓ Options=
✓ Type=
✓ TimeoutSec=
✓ DirectoryMode=
✓ SloppyOptions=
✓ LazyUnmount=
✓ ForceUnmount=
Automount Unit Settings
All automount unit setting is available to transient units:
✓ Where=
✓ DirectoryMode=
✓ TimeoutIdleSec=
Timer Unit Settings
Most timer unit settings are available to transient units.
✓ OnActiveSec=
✓ OnBootSec=
✓ OnCalendar=
✓ OnClockChange=
✓ OnStartupSec=
✓ OnTimezoneChange
✓ OnUnitActiveSec=
✓ OnUnitInactiveSec=
✓ Persistent=
✓ WakeSystem=
✓ RemainAfterElapse=
✓ AccuracySec=
✓ RandomizedDelaySec=
Unit=
Slice Unit Settings
Slice units are fully supported as transient units, but they have no settings of their own beyond the generic unit and resource control settings.
Scope Unit Settings
Scope units are fully supported as transient units (in fact they only exist as such).
✓ TimeoutStopSec=
Socket Unit Settings
Most socket unit settings are available to transient units.
✓ ListenStream=
✓ ListenDatagram=
✓ ListenSequentialPacket=
✓ ListenFIFO=
✓ ListenNetlink=
✓ ListenSpecial=
✓ ListenMessageQueue=
✓ ListenUSBFunction=
✓ SocketProtocol=
✓ BindIPv6Only=
✓ Backlog=
✓ BindToDevice=
✓ ExecStartPre=
✓ ExecStartPost=
✓ ExecStopPre=
✓ ExecStopPost=
✓ TimeoutSec=
✓ SocketUser=
✓ SocketGroup=
✓ SocketMode=
✓ DirectoryMode=
✓ Accept=
✓ Writable=
✓ MaxConnections=
✓ MaxConnectionsPerSource=
✓ KeepAlive=
✓ KeepAliveTimeSec=
✓ KeepAliveIntervalSec=
✓ KeepAliveProbes=
✓ DeferAcceptSec=
✓ NoDelay=
✓ Priority=
✓ ReceiveBuffer=
✓ SendBuffer=
✓ IPTOS=
✓ IPTTL=
✓ Mark=
✓ PipeSize=
✓ FreeBind=
✓ Transparent=
✓ Broadcast=
✓ PassCredentials=
✓ PassSecurity=
✓ TCPCongestion=
✓ ReusePort=
✓ MessageQueueMaxMessages=
✓ MessageQueueMessageSize=
✓ RemoveOnStop=
✓ Symlinks=
✓ FileDescriptorName=
Service=
✓ TriggerLimitIntervalSec=
✓ TriggerLimitBurst=
✓ SmackLabel=
✓ SmackLabelIPIn=
✓ SmackLabelIPOut=
✓ SELinuxContextFromNet=
Swap Unit Settings
Swap units are currently not available at all as transient units:
What=
Priority=
Options=
TimeoutSec=
Path Unit Settings
Most path unit settings are available to transient units.
✓ PathExists=
✓ PathExistsGlob=
✓ PathChanged=
✓ PathModified=
✓ DirectoryNotEmpty=
Unit=
✓ MakeDirectory=
✓ DirectoryMode=
Install Section
The [Install]
section is currently not available at all for transient units, and it probably doesn't even make sense.
Alias=
WantedBy=
RequiredBy=
Also=
DefaultInstance=