1
0
mirror of https://github.com/systemd/systemd.git synced 2024-12-22 17:35:35 +03:00

man: typo fixes

A mix of fixes for typos and UK english
This commit is contained in:
Thomas Hindoe Paaboel Andersen 2016-10-12 23:02:44 +02:00
parent 6612379adf
commit 2dd678171e
13 changed files with 19 additions and 19 deletions

View File

@ -261,7 +261,7 @@
<listitem><para>Controls whether actions that <command>systemd-logind</command>
takes when the power and sleep keys and the lid switch are triggered are subject
to high-level inhibitor locks ("shutdown", "sleep", "idle"). Low level inhibitor
locks ("handle-*-key"), are always honoured, irrespective of this setting.</para>
locks ("handle-*-key"), are always honored, irrespective of this setting.</para>
<para>These settings take boolean arguments. If <literal>no</literal>, the
inhibitor locks taken by applications are respected. If <literal>yes</literal>,

View File

@ -97,7 +97,7 @@
iteration a single event source is dispatched. Each time an event
source is dispatched the kernel is polled for new events, before
the next event source is dispatched. The event loop is designed to
honour priorities and provide fairness within each priority. It is
honor priorities and provide fairness within each priority. It is
not designed to provide optimal throughput, as this contradicts
these goals due the limitations of the underlying <citerefentry
project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry>

View File

@ -115,7 +115,7 @@
reliable. However, it is guaranteed that if events are seen on
multiple same-priority event sources at the same time, each one is
not dispatched again until all others have been dispatched
once. This behaviour guarantees that within each priority
once. This behavior guarantees that within each priority
particular event sources do not starve or dominate the event
loop.</para>

View File

@ -306,7 +306,7 @@
<para><literal>ignore-requirements</literal> is similar to
<literal>ignore-dependencies</literal>, but only causes the
requirement dependencies to be ignored, the ordering
dependencies will still be honoured.</para>
dependencies will still be honored.</para>
</listitem>
</varlistentry>
@ -1006,7 +1006,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
desired, combine this command with the <option>--now</option> switch, or invoke <command>start</command>
with appropriate arguments later. Note that in case of unit instance enablement (i.e. enablement of units of
the form <filename>foo@bar.service</filename>), symlinks named the same as instances are created in the
unit configuration diectory, however they point to the single template unit file they are instantiated
unit configuration directory, however they point to the single template unit file they are instantiated
from.</para>
<para>This command expects either valid unit names (in which case various unit file directories are

View File

@ -107,7 +107,7 @@
<citerefentry><refentrytitle>systemd-sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
<para>The behaviour of <command>systemd-coredump</command> itself is configured through the configuration file
<para>The behavior of <command>systemd-coredump</command> itself is configured through the configuration file
<filename>/etc/systemd/coredump.conf</filename> and corresponding snippets
<filename>/etc/systemd/coredump.conf.d/*.conf</filename>, see
<citerefentry><refentrytitle>coredump.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. A new

View File

@ -260,7 +260,7 @@
<refsect1>
<title>The udev Database</title>
<para>If <option>--discover</option> is used, <command>systemd-mount</command> honours a couple of additional udev
<para>If <option>--discover</option> is used, <command>systemd-mount</command> honors a couple of additional udev
properties of block devices:</para>
<variablelist class='udev-directives'>

View File

@ -405,7 +405,7 @@
purposes (usually in the range beyond the host's UID/GID 65536). The parameter may be specified as follows:</para>
<orderedlist>
<listitem><para>If one or two colon-separated numers are specified, user namespacing is turned on. The first
<listitem><para>If one or two colon-separated numbers are specified, user namespacing is turned on. The first
parameter specifies the first host UID/GID to assign to the container, the second parameter specifies the
number of host UIDs/GIDs to assign to the container. If the second parameter is omitted, 65536 UIDs/GIDs are
assigned.</para></listitem>
@ -425,13 +425,13 @@
range is automatically chosen. As first step, the file owner of the root directory of the container's
directory tree is read, and it is checked that it is currently not used by the system otherwise (in
particular, that no other container is using it). If this check is successful, the UID/GID range determined
this way is used, similar to the behaviour if "yes" is specified. If the check is not successful (and thus
this way is used, similar to the behavior if "yes" is specified. If the check is not successful (and thus
the UID/GID range indicated in the root directory's file owner is already used elsewhere) a new currently
unused UID/GID range of 65536 UIDs/GIDs is randomly chosen between the host UID/GIDs of 524288 and
1878982656, always starting at a multiple of 65536. This setting implies
<option>--private-users-chown</option> (see below), which has the effect that the files and directories in
the container's directory tree will be owned by the appropriate users of the range picked. Using this option
makes user namespace behaviour fully automatic. Note that the first invocation of a previously unused
makes user namespace behavior fully automatic. Note that the first invocation of a previously unused
container image might result in picking a new UID/GID range for it, and thus in the (possibly expensive) file
ownership adjustment operation. However, subsequent invocations of the container will be cheap (unless of
course the picked UID/GID range is assigned to a different use by then).</para></listitem>
@ -440,7 +440,7 @@
<para>It is recommended to assign at least 65536 UIDs/GIDs to each container, so that the usable UID/GID range in the
container covers 16 bit. For best security, do not assign overlapping UID/GID ranges to multiple containers. It is
hence a good idea to use the upper 16 bit of the host 32-bit UIDs/GIDs as container identifier, while the lower 16
bit encode the container UID/GID used. This is in fact the behaviour enforced by the
bit encode the container UID/GID used. This is in fact the behavior enforced by the
<option>--private-users=pick</option> option.</para>
<para>When user namespaces are used, the GID range assigned to each container is always chosen identical to the
@ -722,7 +722,7 @@
and the subdirectory is symlinked into the host at the same
location. <literal>try-host</literal> and
<literal>try-guest</literal> do the same but do not fail if
the host does not have persistent journalling enabled. If
the host does not have persistent journaling enabled. If
<literal>auto</literal> (the default), and the right
subdirectory of <filename>/var/log/journal</filename> exists,
it will be bind mounted into the container. If the

View File

@ -402,7 +402,7 @@ There is a screen on:
when the user first logs in, and stays around as long as at least one
login session is open. After the user logs out of the last session,
<filename>user@.service</filename> and all services underneath it
are terminated. This behaviour is the default, when "lingering" is
are terminated. This behavior is the default, when "lingering" is
not enabled for that user. Enabling lingering means that
<filename>user@.service</filename> is started automatically during
boot, even if the user is not logged in, and that the service is

View File

@ -109,7 +109,7 @@
<term><varname>CtrlAltDelBurstAction=</varname></term>
<listitem><para>Defines what action will be performed
if user presses Ctr-Alt-Delete more than 7 times in 2s.
if user presses Ctrl-Alt-Delete more than 7 times in 2s.
Can be set to <literal>reboot-force</literal>, <literal>poweroff-force</literal>
or disabled with <literal>ignore</literal>. Defaults to
<literal>reboot-force</literal>.

View File

@ -988,7 +988,7 @@
the unit's own user and group to themselves and everything else to the <literal>nobody</literal> user and
group. This is useful to securely detach the user and group databases used by the unit from the rest of the
system, and thus to create an effective sandbox environment. All files, directories, processes, IPC objects and
other resources owned by users/groups not equalling <literal>root</literal> or the unit's own will stay visible
other resources owned by users/groups not equaling <literal>root</literal> or the unit's own will stay visible
from within the unit but appear owned by the <literal>nobody</literal> user and group. If this mode is enabled,
all unit processes are run without privileges in the host user namespace (regardless if the unit's own
user/group is <literal>root</literal> or not). Specifically this means that the process will have zero process
@ -1560,7 +1560,7 @@
<varlistentry>
<term><varname>$MAINPID</varname></term>
<listitem><para>The PID of the units main process if it is
<listitem><para>The PID of the unit's main process if it is
known. This is only set for control processes as invoked by
<varname>ExecReload=</varname> and similar. </para></listitem>
</varlistentry>

View File

@ -107,7 +107,7 @@
<listitem>
<para>A whitespace-separated list of shell-style globs matching
the device name, as exposed by the udev property
"INTERFACE". This can not be used to match on names that have
"INTERFACE". This cannot be used to match on names that have
already been changed from userspace. Caution is advised when matching on
kernel-assigned names, as they are known to be unstable
between reboots.</para>

View File

@ -535,7 +535,7 @@
and the kernel will ignore initial ACK packets without any
data. The argument specifies the approximate amount of time
the kernel should wait for incoming data before falling back
to the normal behavior of honouring empty ACK packets. This
to the normal behavior of honoring empty ACK packets. This
option is beneficial for protocols where the client sends the
data first (e.g. HTTP, in contrast to SMTP), because the
server process will not be woken up unnecessarily before it

View File

@ -195,7 +195,7 @@
instantiated units, this logic will first look for the instance <literal>.d/</literal>
subdirectory and read its <literal>.conf</literal> files, followed by the template
<literal>.d/</literal> subdirectory and the <literal>.conf</literal> files there. Also note that
settings from the <literal>[Install]</literal> section are not honoured in drop-in unit files,
settings from the <literal>[Install]</literal> section are not honored in drop-in unit files,
and have no effect.</para>
<para>In addition to <filename>/etc/systemd/system</filename>, the drop-in <literal>.d</literal>