IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Yes, there are still a lot of users of bzip2, but it's fallen out of
favour after LZMA/xz, which can compress a lot more and often
decompresses faster than bzip2 too.
We use strtoul() which returns an "unsigned long", but then assign this
to int or unsigned in, i.e. drop 32bit silently on 64bit systems. Let's
clean this up a bit, and retain the right types.
This stuff is likely to fail in many setups (for example when quota is
not supported by the btrfs version), hence only log at debug
level. Previously we'd silently ignore things altogether which makes
things pretty hard to debug.
This changes the output a bit, as the previous multi-line output of each
inhibitor is changed to a single line, but it does unify the output look
with the one of our other tools. Moreover this adds proper sorting.
When we parse an "u" from an sd_bus_message then we need to do that into
a uint32_t, not a pid_t or uid_t, even if this is likely the same.
Also, let's count objects we keep in memory as size_t as usual.
This effectively reverts 2bc54be485def3d1697a00209ff73ae21aa7f268
and relevant changes in #9920, as it is used to determine the version
of udev, e.g., dracut.
Fixesdracutdevs/dracut#468.
systemd-tmpfiles-setup.service needs to be ordered after
systemd-journald.service, so entries in /run/log/journal are already
created when systemd-tmpfiles tries to adjust its permissions.
This is specially problematic for setups using a volatile journal where
the initrd does not ship a machine-id (i.e. OSTree-based systems), where
logs from the initrd will be inaccessible for users in the
systemd-journal group. It also has a side effect of `journalctl --user`
failing with "No journal files were opened due to insufficient
permissions".
Fixes#10128.
We would create a useless empty directory under build/.
It seems we were lucky and all symlinks were installed into directories
which were alredy created because we installed something into the same
location earlier.
While at it, also add '-v' to 'mkdir -p'. This will print the names of
directories as they are created (just once), making it easier to see all of
what the install script is doing.
In order to shut down networkd properly, the delegated routes added
need to be removed properly, and as error reporting is wanted, the
network link is needed in the debug output.
Solve this by calling manager_dhcp6_prefix_remove_all(), which will
remove each prefix stored in the Manager structure, and while doing
that reference each link so that it isn't freed before the route
removal callback is called. This in turn causes the network link to
be referenced once more, and an explicit hashmap_remove() must be
called to remove the network link from the m->links hashmap.
Also, since the registered callback is not called when the DHCPv6
client is stopped with sd_dhcp6_client_stop(), an explicit call
to dhcp6_lease_pd_prefix_lost() needs to be made to clean up any
unreachable routes set up for the delegated prefixes.
Instead of setting many small unreachable routes for each of the /64
subnets that were not distributed between the links requesting delegated
prefixes, set one unreachable route for the size of the delegated
prefix. Each subnet asssigned to a downstream link will add a routable
subnet for that link, and as the subnet assigned to the downstream link
has a longer prefix than the whole delegated prefix, the downstream
link subnet routes are preferred over the unroutable delegated one.
The unreachable route is not added when the delegated prefix is exactly
a /64 as the prefix size cannot be used to sort out the order of routing
into a bigger blocking subnet with the smaller /64 punching routable
"holes" into it.
When stopping the DHCPv6 client, the unroutable delegated prefix is
removed before the downstream link prefixes are unassigned.
Since we now have the possibility to request prefixes to be delegated
without corresponding IPv6 addresses, it does not make sense to store
lease T1 and T2 timeouts in the otherwise unused IA_NA structure.
Therefore lease timeouts T1 and T2 are moved to the DHCPv6 client
structure, as there will be only one set of stateful timeouts required
by RFC 7550, Section 4.3.
Select T1 and T2 timeouts based on whether addresses or prefixes were
requested and what the server offered. The address and prefix timeouts
values have been computed earlier when the relevant DHCPv6 options were
parsed.
Add function to fetch the IAID for the delegated IA_PD prefix. In
order to keep things simple in the implemntation, the same IAID
is used with IA_NA addresses and IA_PD prefixes. But the DHCPv6
server can choose to return only IA_PD prefixes, and the client
can nowadays omit requesting of IA_NA addresses. Since the function
fetching said IAID from the lease looks only for IA_NA ones, it
will return an empty IAID, which of course does not match the one
set for prefixes.
Fix this by adding a function returning the IAID for the prefix.
RFC 7084, WPD-4, requires Customer Edge end routers to behave
according to the following:
"WPD-4: By default, the IPv6 CE router MUST initiate DHCPv6 prefix
delegation when either the M or O flags are set to 1 in a
received Router Advertisement (RA) message. Behavior of the
CE router to use DHCPv6 prefix delegation when the CE router
has not received any RA or received an RA with the M and the
O bits set to zero is out of scope for this document."
Since it cannot be automatically detected whether DHCPv6 is to be
operated as an CE end router or whether to initiate an Informational
exchange to obtain other useful network information via DHCPv6 when the
Router Advertisement 'O' bit is set, a 'ForceDHCPv6PDOtherInformation'
boolean network configuration option in the '[DHCP]' section of a is
introduced. Setting this option causes DHCPv6 to be started in stateful
mode, although only the 'O' bit is seen in the Router Advertisement.
When 'ForceDHCPv6PDOtherInformation' is set and the Router Advertisement
has only the Other information 'O' bit set, disable requests for IA_NA
addresses.
Fixes#9745.
Add function to enable/disable IA_NA address requests. Internally
handle the request as a bit mask and add IA_PD prefix delegation
to the same bit mask instead of having a separate boolean. Thus
the calling code can set requests for prefix and address delegation
separately. This is handy when supporting RFC 7084.
Add a check in the code that at least something is requested from
the server in Managed mode. By default request IA_NA addresses from
the DHCPv6 server. Although a value has been defined for IA_TA,
temporay IA_TA addresses are not yet requested.
Add helper function for fetching enabled/disabled state of Prefix
Delegation for a DHCPv6 client. Update function setting prefix
delegation to use an int instead of a boolean.
