IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When directives-template.xml was created in 282230882c,
this generator started picking it up. Let's filter it out properly again,
and also simply the filter while at it.
I wasn't 100% convinced that this is the right thing to do, hence the separate
commit. But e.g. for paths we index all mentions, so I think it's reasonable to
do the same here.
The hack with getparent().txt is not very pretty, but the whole
thing seems to work well enough. It is useful to figure out whihc
specifiers are supported where.
In the beginning, it was rather short, and reasonable to include inline.
Now it is long and unwieldy, let's split it out.
While at it, let's reindent and wrap using our current standards.
The name of the helper didn't match the name of the meson target, which was
always confusing me. With this change, we consistenly use "update" to
re-generate things which we otherwise keep in vc, and "make" for things
which are generated during each build.
In a few cases, the prefix was originally necessary because a different helper
script was used for automake, and a different one for meson. But now we use
meson exclusively, and the prefix isn't useful. This also synchronizes the
target name, file name, and variable name in meson.build. The targets exposed
by meson didn't have the prefix, so the user interface is unchanged.
(The prefix is retained in the few tools that are used for meson itself,
e.g. meosn-vcs-tag.sh, meson-make-symlink.sh, etc.)
This commit looks for a new "extra-ref" attribute in <variablelist>
If this attribute is specified, its content will be index as pointing to
the current man-page in systemd.directives
So far, make-directive-index would look for
./valistentry/term/varname for elements to add to the directive man page.
This commit allows to specify xpath= in the varlist directive to tell
the generator what to look for.
So far the units there were being documented had only one custom interface.
But for the pid1 case, something more flexibile is needed. So let's add
an annotation in the page what we want to print, and filter in the generator.
Compares to gdbus output, the values of properties are replaced by ellipses.
For arrays and strings, the outer markers are kept. This is obviously also told
by the type string, but it seems a bit easier to read this way.
For any elements which are undocumented, a comment is inserted in sources.
"Undocumented" means that the expected element was not found. This might
require some adjustments if I missed some markup types.
Invocation is manual:
$ tools/update-dbus-docs.py tools/update-dbus-docs.py man/org.freedesktop.login1.xml
$ tools/update-dbus-docs.py tools/update-dbus-docs.py man/org.freedesktop.resolve1.xml
$ tools/update-dbus-docs.py tools/update-dbus-docs.py man/org.freedesktop.systemd1.xml
...
If some object is not found on the bus, the existing output is retained. So the
user needs to make sure that the appropriate objects have been instantiated
before calling this. We don't change the dbus interface very often, so I think
this manual mode is OK as a starting point. Making this fully automatic later
would be nice of course.
Unfortunately meson does not install symlinks, but copies the symlink
destination instead. So symlinks need to be created by a script.
This commit adds both symlinks in test/testsuite-08.units/ and meson
scriptlet calls. Strictly speaking, the first is not necessary, since nothing
reads stuff directly from the source tree.
codesearch.debian.net shows no uses (except for the definition in systemd and
elogind).
$ cat > test.c
int main() {
sd_bus_try_close(NULL);
return 0;
}
$ gcc -Isrc/systemd -Wall -o testbus test.c -lsystemd
test.c: In function ‘main’:
test.c:4:3: warning: ‘sd_bus_try_close’ is deprecated [-Wdeprecated-declarations]
4 | sd_bus_try_close(NULL);
| ^~~~~~~~~~~~~~~~
In file included from test.c:1:
src/systemd/sd-bus.h:180:5: note: declared here
180 | int sd_bus_try_close(sd_bus *bus) _sd_deprecated_; /* deprecated */
| ^~~~~~~~~~~~~~~~
As in 2a5fcfae02
and in 3e67e5c992
using /usr/bin/env allows bash to be looked up in PATH
rather than being hard-coded.
As with the previous changes the same arguments apply
- distributions have scripts to rewrite shebangs on installation and
they know what locations to rely on.
- For tests/compilation we should rather rely on the user to have setup
there PATH correctly.
In particular this makes testing from git easier on NixOS where do not provide
/bin/bash to improve compose-ability.
The compatibility issue in meson v0.53 has been fixed in v0.53.1, which
is already available through pip, so let's remove the pin for meson
introduced before.
Reverts: 514793658c
Latest meson doesn't work with older python 3.5, which is present on
Ubuntu 16.04. Let's pin in to the latest working version (0.52.1) until
we properly bump all necessary Ubuntu images to 18.04.
See: https://github.com/mesonbuild/meson/issues/6427
Some options would appear twice in the index, e.g. --collect= and
--collect. Some man pages use one form, some the other, and the argument
might be mandatory for some commands but not others. Anyway, let's display
them as one entry, to reduce the total number of items listed.
When wrong element types are used, directives are sometimes placed in the wrong
section. Also, strip part of text starting with "'", which is used in a few
places and which is displayed improperly in the index.
There is no change in the file right now, but the download seems to work
OK.
It's funny that the biggest company in the world cannot provide a
download link in plain text.
Judging by https://travis-ci.org/systemd/systemd/jobs/604425785
(where the script failed with "tools/coverity.sh: line 45: python: command not found")
python-unversioned-command is no longer installed by default with python2.
Given that it's not the first time python has vanished and it's not clear
what exactly should be installed to make sure it's there, let's just use jq instead.
The ChromeOS ecosystem has a large amount of testing, both automated
and manual across devices including measurement of power regressions.
It's safe to assume that any of these devices will handle USB
auto-suspend appropriately. Use the script from ChromeOS
https://chromium.googlesource.com/chromiumos/platform2/+/master/power_manager/udev/gen_autosuspend_rules.py
to generate udev rules at build time.
This script in systemd `tools/chromeos/gen_autosuspend_rules.py` should be kept
in sync with the ChromeOS version of the script.
Manually added autosuspend devices should be placed in the new
template `rules/61-autosuspend-manual.rules`
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
When the fuzz target was integrated, it was added as a stopgap
to get fuzz-json up and running. It served its purpose and can
safely be removed to prevent tools/oss-fuzz.sh from failing with
```
+wget -O /home/travis/build/systemd/systemd/out/fuzz-json_seed_corpus.zip https://storage.googleapis.com/skia-fuzzer/oss-fuzz/skjson_seed_corpus.zip
--2019-09-10 22:40:44-- https://storage.googleapis.com/skia-fuzzer/oss-fuzz/skjson_seed_corpus.zip
Resolving storage.googleapis.com (storage.googleapis.com)... 74.125.70.128, 2607:f8b0:4001:c05::80
Connecting to storage.googleapis.com (storage.googleapis.com)|74.125.70.128|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2019-09-10 22:40:44 ERROR 403: Forbidden.
```
Ideally we should put our seed corpus somewhere and download it from there
but I haven't got round to it.
When build from release tarball and where there is parent .git dir,
this situtaion will get wrong version info. (build with buildroot)
The systemd running show wrong version in dmesg log:
systemd[1]: systemd 2019.02-1086-gf5f17c4 running in system mode.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Shoule be:
systemd[1]: systemd 241 running in system mode. (-PAM -AUDIT -SEL
^^^^^^^^^^^
We had all kinds of indentation: 2 sp, 3 sp, 4 sp, 8 sp, and mixed.
4 sp was the most common, in particular the majority of scripts under test/
used that. Let's standarize on 4 sp, because many commandlines are long and
there's a lot of nesting, and with 8sp indentation less stuff fits. 4 sp
also seems to be the default indentation, so this will make it less likely
that people will mess up if they don't load the editor config. (I think people
often use vi, and vi has no support to load project-wide configuration
automatically. We distribute a .vimrc file, but it is not loaded by default,
and even the instructions in it seem to discourage its use for security
reasons.)
Also remove the few vim config lines that were left. We should either have them
on all files, or none.
Also remove some strange stuff like '#!/bin/env bash', yikes.
* Use more secure https://www.uefi.orghttp://www.uefi.org directs to https://uefi.org/, so this saves one
redirect.
$ curl -I http://www.uefi.org
HTTP/1.1 302 Found
Server: nginx
Date: Tue, 09 Apr 2019 14:54:46 GMT
Content-Type: text/html; charset=iso-8859-1
Connection: keep-alive
X-Content-Type-Options: nosniff
Location: https://uefi.org/
Cache-Control: max-age=1209600
Expires: Tue, 23 Apr 2019 14:54:46 GMT
Run the command below to update all occurrences.
git grep -l http://www.uefi.org | xargs sed -i 's,http://www.uefi.org,https://www.uefi.org,'
* Use https://uefi.org to save redirect
Save one redirect by using the target location.
$ curl -I https://www.uefi.org
HTTP/1.1 301 Moved Permanently
Server: nginx
Date: Tue, 09 Apr 2019 14:55:42 GMT
Content-Type: text/html; charset=iso-8859-1
Connection: keep-alive
X-Content-Type-Options: nosniff
Location: https://uefi.org/
Cache-Control: max-age=1209600
Expires: Tue, 23 Apr 2019 14:55:42 GMT
Run the command below to update all occurrences.
git grep -l https://www.uefi.org | xargs sed -i 's,https://www.uefi.org,https://uefi.org,'
We should probably refer to them from other man pages
for programs which use them, since right now all refs are
in systemd-boot(7). But creating the section is a good step
anyway.
They is quite a bit of those directives and they were in "MISCELLANEOUS" because
they don't quite fit anywhere. When the OCI-compat stuff is merged, there'll
be even more, so let's make a separate section for them.
We had "SYSTEM MANAGER DIRECTIVES" which was a misnomer already, because
it also listed user manager stuff. Let's make this a more general section
and move the items for other services there too (from "MISCELANENOUS").
Strictly speaking, those are not environment variables, but they are compatible
and people think about them like this. Moving them makes them easier to find.
The script does not use any bash features.
On NixOS we have /bin/sh and /usr/bin/env for posix compatibility
but not /bin/bash as it is stored in our nix store.
With this change one can run the `meson configure` without patching
which greatly helps, when working on upstream contributions.
This uses a {% for %} loop in Jekyll to render the page, from the "title"
information in the Front Matter of the actual page files.
This also makes `make-index-md` build rule unnecessary, since generation is
done by the template engine itself.
Tested this by running Jekyll locally.
This will be useful when building distro packages, because we can set the
version string to the rpm/dpkg/whatever version string, and getter reports
from end users.
$ build/systemctl --version
systemd 239-3555-g6178cbb5b5
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid
$ git tag v240 -m 'v240'
$ ninja -C build
ninja: Entering directory `build'
[76/76] Linking target fuzz-unit-file.
$ build/systemctl --version
systemd 240
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid
This is very useful during development, because a precise version string is
embedded in the build product and displayed during boot, so we don't have to
guess answers for questions like "did I just boot the latest version or the one
from before?".
This change creates an overhead for "noop" builds. On my laptop, 'ninja -C
build' that does nothing goes from 0.1 to 0.5 s. It would be nice to avoid
this, but I think that <1 s is still acceptable.
Fixes#7183.
PACKAGE_VERSION is renamed to GIT_VERSION, to make it obvious that this is the
more dynamically changing version string.
Why save to a file? It would be easy to generate the version tag using
run_command(), but we want to go through a file so that stuff gets rebuilt when
this file changes. If we just defined an variable in meson, ninja wouldn't know
it needs to rebuild things.
New features are constantly added to networkd. Apparently, not everybody
knows that the "directives" files should be updated too to make
the fuzzers aware of them.
This GDB script was converted to use Python 3 along with all other
Python scripts in commit b95f5528cc, but still used the Python 2 print
statement syntax instead of the Python 3 print function. Fix that.
We also add the Python 2 compatibility statement, just in case some GDB
still uses Python 2 instead of Python 3.
The workaround is no longer necessary, because the scripts
checking fuzzers have stopped going down to the subdirectories
of $OUT and started to look for the string "LLVMFuzzerTestOneInput"
to tell fuzzers and random binaries apart. Some more details can be
found at https://github.com/google/oss-fuzz/issues/1566.
Add CC0 as the license. SPDX does not have a "public domain" tag, but CC0 is
more or less equivalent. We should have *some* header to avoid doubts in the
future.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
