IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
MemoryDenyWriteExecution policy could be be bypassed by using pkey_mprotect
instead of mprotect to create an executable writable mapping.
The impact is mitigated by the fact that the man page says "Note that this
feature is fully available on x86-64, and partially on x86", so hopefully
people do not rely on it as a sole security measure.
Found by Karin Hossen and Thomas Imbert from Sogeti ESEC R&D.
https://bugs.launchpad.net/bugs/1725348
Let's clarify that it's not networkd that renames interfaces, but
something else (for example, udev's link builtin based on .link files)
This doesn't change any logic, it just rewords the message a bit, to
clarify that we only log this for informational purposes, not because we
execute the rename operation ourselves.
Fixes: #7143
Fix loginctl seat sysfs tree ellipsation logic.
Simple reproducer:
loginctl --full seat-status seat0|cat
→ after this PR, all lines are shown in full. Before, lines were ellipsized to terminal width.
This makes each system call in SystemCallFilter= blacklist optionally
takes errno name or number after a colon. The errno takes precedence
over the one given by SystemCallErrorNumber=.
C.f. #7173.
Closes#7169.
Let's hook up the sysfs tree output with the output flags logic,
already used when dumping log lines or process trees. This way we get
very similar output handling for line breaking/ellipsation in all three
outputs of structured data.
Fixes: #7095
Let's say that (size_t) -1 (i.e. SIZE_T_MAX) is equivalent to
"unbounded" ellipsation, i.e. ellipsation as NOP. In which case the
relevant functions become little more than strdup()/strndup().
This is useful to simplify caller code in case we want to turn off
ellipsation in certain code paths with minimal caller-side handling for
this.
loginctl, machinectl, systemctl all have very similar implementations of
a get_output_flags() functions. Simplify it by merging two lines that
set the same flag.
There should be a way to turn this logic of, and DefaultDependencies=
appears to be the right option for that, hence let's downgrade this
dependency type from "implicit" to "default, and thus honour
DefaultDependencies=.
This also drops mount_get_fstype() as we only have a single user needing
this now.
A follow-up for #7076.
Previously dependencies configured with SYSTEMD_WANTS would be collected
on a device unit as long as it was loaded. let's fix that, and remove
dependencies again when SYTEMD_WANTS changes.
This replaces the dependencies Set* objects by Hashmap* objects, where
the key is the depending Unit, and the value is a bitmask encoding why
the specific dependency was created.
The bitmask contains a number of different, defined bits, that indicate
why dependencies exist, for example whether they are created due to
explicitly configured deps in files, by udev rules or implicitly.
Note that memory usage is not increased by this change, even though we
store more information, as we manage to encode the bit mask inside the
value pointer each Hashmap entry contains.
Why this all? When we know how a dependency came to be, we can update
dependencies correctly when a configuration source changes but others
are left unaltered. Specifically:
1. We can fix UDEV_WANTS dependency generation: so far we kept adding
dependencies configured that way, but if a device lost such a
dependency we couldn't them again as there was no scheme for removing
of dependencies in place.
2. We can implement "pin-pointed" reload of unit files. If we know what
dependencies were created as result of configuration in a unit file,
then we know what to flush out when we want to reload it.
3. It's useful for debugging: "systemd-analyze dump" now shows
this information, helping substantially with understanding how
systemd's dependency tree came to be the way it came to be.
On Fedora /etc/init.d is a symlink to /etc/rc.d/init.d. Our build
scripts default to /etc/init.d since that is the LSB default. Let's make
sure the build script thus follows the symlink correctly and configures
to path explicitly, since otherwise our build artifacts in $DESTDIR are
incompatible with the setup we actually need for Fedora.
This way these dirs will be created automatically if they are missing,
thus always guaranteeing optimal speedy behaviour.
(Well at least, after https://github.com/systemd/mkosi/pull/181 is
merged)
We neglected to set error_message for errors which occur _after_ the
`finish` label. These fatal errors only happen in paths where `finish`
was reached successfully, i.e. error_message has not already been set
(and this analysis is simple enough that this need not cause too much
headaches. Also our new assignments to error_message come immediately
after execve() calls, which would have lost the error_message if it had
been set).
Also print a status message when we fail to exec init, otherwise the only
sign the user will see is `# ` :).
This addresses the lack of error messages pointed out in issue #6827.
It was dropped in 89439d4fc0. As a result, every
process that uses a hashmap allocates and then leaks the hashmap mempools.
The mempools are only allocated in the main thread, but we don't know where
the memory is used.
So let's check if we are the last thread and free the mempools then. This is
fairly heavy, because /proc/self/status has to be opened and parsed, but we do
it only when compiled for valgrind, i.e. not by default, and compared to running
under valgrind or asan, the extra cost is acceptable. The big advantage is that
we don't have to think or filter out this false positive.
As a micro-opt, cleanup is attempted only in the main thread. We could allow
any thread to check if it is the last one and perform cleanup, but that'd mean
that we'd have to _do_ the check in every thread. We don't use threads like
that, our non-main threads are always short-lived, so let's just accept the
possibility that we'll leak memory if a thread survives. The check is also
non-atomic, but it's called in a destructor of the main thread _and_ we do
cleanup only when there are no other threads, so the risk of some library
suddenly spawning another thread is very low. All in all, this is not perfect,
but should work in 999‰ of cases.
Fixes the following valgrind warning:
==22564== HEAP SUMMARY:
==22564== in use at exit: 8,192 bytes in 2 blocks
==22564== total heap usage: 243 allocs, 241 frees, 151,905 bytes allocated
==22564==
==22564== 4,096 bytes in 1 blocks are still reachable in loss record 1 of 2
==22564== at 0x4C2FB6B: malloc (vg_replace_malloc.c:299)
==22564== by 0x4F08A8C: mempool_alloc_tile (mempool.c:62)
==22564== by 0x4F08B16: mempool_alloc0_tile (mempool.c:81)
==22564== by 0x4EF8DE0: hashmap_base_new (hashmap.c:748)
==22564== by 0x4EF8ED9: internal_hashmap_new (hashmap.c:782)
==22564== by 0x11045D: test_hashmap_copy (test-hashmap-plain.c:87)
==22564== by 0x115722: test_hashmap_funcs (test-hashmap-plain.c:914)
==22564== by 0x10FC9D: main (test-hashmap.c:60)
==22564==
==22564== 4,096 bytes in 1 blocks are still reachable in loss record 2 of 2
==22564== at 0x4C2FB6B: malloc (vg_replace_malloc.c:299)
==22564== by 0x4F08A8C: mempool_alloc_tile (mempool.c:62)
==22564== by 0x4F08B16: mempool_alloc0_tile (mempool.c:81)
==22564== by 0x4EF8DE0: hashmap_base_new (hashmap.c:748)
==22564== by 0x4EF8EF8: internal_ordered_hashmap_new (hashmap.c:786)
==22564== by 0x10A2A0: test_ordered_hashmap_copy (test-hashmap-ordered.c:89)
==22564== by 0x10F70F: test_ordered_hashmap_funcs (test-hashmap-ordered.c:916)
==22564== by 0x10FCA2: main (test-hashmap.c:61)
==22564==
==22564== LEAK SUMMARY:
==22564== definitely lost: 0 bytes in 0 blocks
==22564== indirectly lost: 0 bytes in 0 blocks
==22564== possibly lost: 0 bytes in 0 blocks
==22564== still reachable: 8,192 bytes in 2 blocks
==22564== suppressed: 0 bytes in 0 blocks
v2:
- check if we are the main thread
v3:
- check if there are no other threads
Commit 83b48159 set ID_BUS for these subsystems but copied the intent
of commit c49df207 by not creating symlinks for those devices.
Remove the GOTO so that the rest of the rules are still processed and
symlinks are created for rmi and i8042 devices.
PR #3865 introduced RemoveIPC= but the option is not listed in
load-fragment-gperf.gperf. So, the option could be used only via d-bus.
This adds RemoveIPC= in load-fragment-gperf.gperf. Then, now we can
set the option in unit files.
Fixes#7281.
