IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Even when a mount namespace is created, previously host's sysfs is used,
especially with RootDirectory= or RootImage=, thus service processes can
still access the properties of the network interfaces in the main network
namespace through sysfs.
This makes, sysfs is remounted with the new network namespace tag, except
when PrivateMounts= is explicitly disabled. Hence, the properties of the
network interfaces in the main network namespace cannot be accessed by
service processes through sysfs.
Fixes#26422.
DeviceAllow= and others are applied to the whole cgroup via bpf, so
using '+' on an Exec line will not bypass them. Explain this in the
manpage.
Fixes https://github.com/systemd/systemd/issues/26035
Fixes#25780.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<size=> → B<cipher=>, B<hash=>, B<size=>
>
> "Force LUKS mode\\&. When this mode is used, the following options are "
> "ignored since they are provided by the LUKS header on the device: "
> "I<cipher=>, I<hash=>, I<size=>"
Seems OK to me. The full stop is there and has been for at least a few years. And we use <option> for the markup, which is appropriate here.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-size=>, I<size=> → B<cipher=>, B<hash=>, B<keyfile-offset=>, B<keyfile-size=>, B<size=>
>
> "Use TrueCrypt encryption mode\\&. When this mode is used, the following "
> "options are ignored since they are provided by the TrueCrypt header on the "
> "device or do not apply: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-"
> "size=>, I<size=>"
Same.
> Man page: journalctl.1
> Issue 1: make be → may be
Fixed.
> Issue 2: below\\&. → below:
Fixed.
> Man page: journalctl.1
> Issue: Colon at the end?
>
> "The following commands are understood\\&. If none is specified the default "
> "is to display journal records\\&."
> msgstr ""
> "Die folgenden Befehle werden verstanden\\&. Falls keiner festgelegt ist, ist "
> "die Anzeige von Journal-Datensätzen die Vorgabe\\&."
This is a bit awkward, but I'm not sure how to fix it.
> Man page: kernel-install.8
> Issue: methods a fallback → methods fallback
It was correct, but I added a comma to make the sense clearer.
> Man page: loader.conf.5
> Issue 1: secure boot variables → Secure Boot variables
> Issue 2: one → one for (multiple times)
>
> "Supported secure boot variables are one database for authorized images, one "
> "key exchange key (KEK) and one platform key (PK)\\&. For more information, "
> "refer to the \\m[blue]B<UEFI specification>\\m[]\\&\\s-2\\u[2]\\d\\s+2, "
> "under Secure Boot and Driver Signing\\&. Another resource that describe the "
> "interplay of the different variables is the \\m[blue]B<EDK2 "
> "documentation>\\m[]\\&\\s-2\\u[3]\\d\\s+2\\&."
"one of" would sound strange. "One this and one that" is OK.
> Man page: loader.conf.5
> Issue: systemd-boot → B<systemd-boot>(7)
Fixed.
> Man page: logind.conf.5
> Issue: systemd-logind → B<systemd-logind>(8)
We use <filename>systemd-logind</> on subsequent references… I think that's good enough.
> Man page: nss-myhostname.8
> Issue: B<getent> → B<getent>(1)
Fixed.
> Man page: nss-resolve.8
> Issue: B<systemd-resolved> → B<systemd-resolved>(8)
The first reference does this, subsequent are shorter.
> Man page: os-release.5
> Issue: Portable Services → Portable Services Documentation?
Updated.
> Man page: pam_systemd_home.8
> Issue: auth and account use "reason", while session and password do not?
Reworded.
> Man page: portablectl.1
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: repart.d.5
> Issue: The partition → the partition
Fixed.
> Man page: repart.d.5
> Issue: B<systemd-repart> → B<systemd-repart>(8)
The first reference does this. I also change this one, because it's pretty far down in the text.
> Man page: systemd.1
> Issue: kernel command line twice?
>
> "Takes a boolean argument\\&. If false disables importing credentials from "
> "the kernel command line, qemu_fw_cfg subsystem or the kernel command line\\&."
Apparently this was fixed already.
> Man page: systemd-boot.7
> Issue: enrollement → enrollment
Fixed.
> Man page: systemd-cryptenroll.1
> Issue: multiple cases: any specified → the specified
Reworded.
> Man page: systemd-cryptenroll.1
> Issue: If this this → If this
Fixed tree-wide.
> Man page: systemd-cryptsetup-generator.8
> Issue: and the initrd → and in the initrd
"Is honoured by the initrd" is OK, because we often speak about the initrd as a single unit. But in the same paragraph we also used "in the initrd", which makes the other use look sloppy. I changed it to "in the initrd" everywhere in that file.
> Man page: systemd.directives.7
> Issue: Why are these two quoted (but not others)?
>
> "B<\\*(Aqh\\*(Aq>"
>
> B<\\*(Aqs\\*(Aq>"
>
> "B<\\*(Aqy\\*(Aq>"
This is autogenerated from files… We use slightly different markup in different files, and it's just too hard to make it consistent. We gave up on this.
> Man page: systemd.exec.5
> Issue 1: B<at>(1p) → B<at>(1)
> Issue 2: B<crontab>(1p) → B<crontab>(1)
Fixed.
> Man page: systemd.exec.5
> Issue: B<select()> → B<select>(2)
Fixed.
> Man page: systemd.exec.5
> Issue: qemu → B<qemu>(1)
The man page doesn't seem to be in any of the canonical places on the web.
I added a link to online docs.
> Man page: systemd.exec.5
> Issue: variable → variables
Seems to be fixed already.
> Man page: systemd-integritysetup-generator.8
> Issue: systemd-integritysetup-generator → B<systemd-integritysetup-generator>
I changed <filename> to <command>.
> Man page: systemd-integritysetup-generator.8
> Issue: superfluous comma at the end
Already fixed.
> Man page: systemd-measure.1
> Issue: (see B<--pcr-bank=>) below → (see B<--pcr-bank=> below)
Reworded.
> Man page: systemd-measure.1
> Issue: =PATH> → =>I<PATH>
Fixed.
> Man page: systemd-measure.1.po
> Issue: B<--bank=DIGEST> → B<--bank=>I<DIGEST>
Fixed.
> Man page: systemd.netdev.5
> Issue: os the → on the
Appears to have been fixed already.
> Man page: systemd.netdev.5
> Issue: Onboard → On-board (as in previous string)
Updated.
> Man page: systemd.network.5
> Issue: B<systemd-networkd> -> B<systemd-networkd>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: B<netlabelctl> → B<netlabelctl>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: Missing verb (aquired? configured?) in the half sentence starting with "or by a "
I dropped the comma.
> Man page: systemd-nspawn.1
> Issue: All host users outside of that range → All other host users
Reworded.
> # FIXME no effect → no effect\\&.
> #. type: Plain text
> #: archlinux debian-unstable fedora-rawhide mageia-cauldron opensuse-tumbleweed
> msgid ""
> "Whichever ID mapping option is used, the same mapping will be used for users "
> "and groups IDs\\&. If B<rootidmap> is used, the group owning the bind "
> "mounted directory will have no effect"
A period is added. Not sure if there's some other issue.
> Man page: systemd-oomd.service.8
> Issue: B<systemd> → B<systemd>(1)
Done.
> Man page: systemd.path.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue 1: indicate phases into TPM2 PCR 11 ??
> Issue 2: Colon at the end of the paragraph?
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue: final boot phase → final shutdown phase?
Updated.
> Man page: systemd-pcrphase.service.8
> Issue: for the the → for the
Fixed tree-wide.
> Man page: systemd-portabled.service.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd-pstore.service.8
> Issue: Here and the following paragraphs: . → \\&. // Upstream: What does this comment mean? // You normally write \\&. for a full dot (full stop etc.); here you write only "." (i.e. a plain dot).
>
> "and we look up \"localhost\", nss-dns will send the following queries to "
> "systemd-resolved listening on 127.0.0.53:53: first \"localhost.foobar.com\", "
> "then \"localhost.barbar.com\", and finally \"localhost\". If (hopefully) the "
> "first two queries fail, systemd-resolved will synthesize an answer for the "
> "third query."
Looks all OK to me.
> Man page: systemd.resource-control.5
> Issue: Missing closing bracket after link to Control Groups version 1
Fixed.
> Man page: systemd-sysext.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd.timer.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd.unit.5
> Issue: that is → that are
Fixed.
> Man page: systemd-veritysetup-generator.8
> Issue: systemd-veritysetup-generator → B<systemd-veritysetup-generator>
>
> "systemd-veritysetup-generator implements B<systemd.generator>(7)\\&."
>
> "systemd-veritysetup-generator understands the following kernel command line "
> "parameters:"
Updated.
> Man page: systemd-volatile-root.service.8
> Issue: initrdyes → Initrd
Fixed.
> Man page: sysupdate.d.5
> Issue: : → \\&. (As above in TRANSFER)
Updated.
> Man page: sysupdate.d.5
> Issue: some → certain
Updated.
> Man page: sysupdate.d.5
> Issue 1: i\\&.e\\& → I\\&.e\\&
Fixed.
> Issue 2: the image → the system
"image" seems correct.
> Man page: tmpfiles.d.5
> Issue: systemd-tmpfiles → B<systemd-tmpfiles>(8)
Updated.
Due to policy checks against system users this cannot currently work, and it is non-obvious.
In the future it might be implemented if support is added to dbus-broker/dbus-daemon, e.g.:
https://github.com/bus1/dbus-broker/issues/259
Define new unit parameter (LogFilterPatterns) to filter logs processed by
journald.
This option is used to store a regular expression which is carried from
PID1 to systemd-journald through a cgroup xattrs:
`user.journald_log_filter_patterns`.
When a service is triggered by a path unit, pass the
path unit name and the path that triggered it via env vars
to the spawned processes.
Note that this is best-effort, as there might be many triggers
at the same time, but we only get woken up by one.
This imports credentials also via SMBIOS' "OEM vendor string" section,
similar to the existing import logic from fw_cfg.
Functionality-wise this is very similar to the existing fw_cfg logic,
both of which are easily settable on the qemu command line.
Pros and cons of each:
SMBIOS OEM vendor strings:
- pro: fast, because memory mapped
- pro: somewhat VMM independent, at least in theory
- pro: qemu upstream sees this as the future
- pro: no additional kernel module needed
- con: strings only, thus binary data is base64 encoded
fw_cfg:
- pro: has been supported for longer in qemu
- pro: supports binary data
- con: slow, because IO port based
- con: only qemu
- con: requires qemu_fw_cfg.ko kernel module
- con: qemu upstream sees this as legacy
This reverts PR #22587 and its follow-up commit. More specifically,
2299b1cae3 (partially),
e176f85527,
ceb46a31a0, and
51bb9076ab.
The PR was merged without final approval, and has several issues:
- OSS fuzz reported issues in the conf parser,
- It calls synchrnous netlink call, it should not be especially in PID1,
- The importance of NFTSet for CGroup and DynamicUser may be
questionable, at least, there was no justification PID1 should support
it.
- For networkd, it should be implemented with Request object,
- There is no test for the feature.
Fixes#23711.
Fixes#23717.
Fixes#23719.
Fixes#23720.
Fixes#23721.
Fixes#23759.
New directive `DynamicUserNFTSet=` provides a method for integrating
configuration of dynamic users into firewall rules with NFT sets.
Example:
```
table inet filter {
set u {
typeof meta skuid
}
chain service_output {
meta skuid != @u drop
accept
}
}
```
```
/etc/systemd/system/dunft.service
[Service]
DynamicUser=yes
DynamicUserNFTSet=inet:filter:u
ExecStart=/bin/sleep 1000
[Install]
WantedBy=multi-user.target
```
```
$ sudo nft list set inet filter u
table inet filter {
set u {
typeof meta skuid
elements = { 64864 }
}
}
$ ps -n --format user,group,pid,command -p `pgrep sleep`
USER GROUP PID COMMAND
64864 64864 55158 /bin/sleep 1000
```
I don't know why this didn't occur to me earlier, but of course, it
*has* to be this data.
(This replaces some German prose about Berlin, that i guess only very
few people will get. With the new blob I think we have a much broader
chance of delivering smiles.)
We use authenticated encryption, and that deserves mention. This in
particular relevant as the fact they are authenticated makes the
credentials useful as initrd parameterization items.
Unprivileged overlayfs is supported since Linux 5.11. The only
change needed to get ExtensionDirectories to work is to avoid
hard-coding the staging directory to the system manager runtime
directory, everything else just works (TM).
Remove the list logic, and simply skip passing metadata if more than one
unit triggered an OnFailure/OnSuccess handler.
Instead of a single env var to loop over, provide each separate item
as its own variable.
Fixes https://github.com/systemd/systemd/issues/22370
The only piece missing was to somehow make /proc appear in the
new user+mount namespace. It is not possible to mount a new
/proc instance, not even with hidepid=invisible,subset=pid, in
a user namespace unless a PID namespace is created too (and also
at the same time as the other namespaces, it is not possible to
mount a new /proc in a child process that creates a PID namespace
forked from a parent that created a user+mount namespace, it has
to happen at the same time).
Use the host's /proc with a bind-mount as a fallback for this
case. User session services would already run with it, so
nothing is lost.
Remove incorrect claim that C escapes (such as \t and \n) are recognized and that control characters are disallowed. Specify the allowed characters and escapes with single quotes, with double quotes, and without quotes.
Add a new setting that follows the same principle and implementation
as ExtensionImages, but using directories as sources.
It will be used to implement support for extending portable images
with directories, since portable services can already use a directory
as root.
Let's not mention a redundant setting of "none". Let's instead only
mention "best-effort", which is the same. Also mention the default
settings properly.
(Also, while we are at it, don#t document the numeric alias, that's
totally redundant and harder to use, so no need to push people towards
it.)
