IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Spotted whilst debugging:
```
[763/2094] Generating man/machine-info.html with a custom command
Element cite in namespace '' encountered in para, but no template matches.
[765/2094] Generating man/machine-info.5 with a custom command
Element cite in namespace '' encountered in para, but no template matches.
```
Follow-up to 357376d0bb.
I think this makes it much easier to figure out what information sources
were used to generate the names, and why certain names were not generated.
On my laptop:
Using default interface naming scheme 'v250'.
ID_NET_NAMING_SCHEME=v250
wwp0s20f0u2i12: addr_assign_type=3, MAC address is not permanent.
wwp0s20f0u2i12: Parsing slot information from sysname "0000:00:14.0": success
wwp0s20f0u2i12: dev_port=0
wwp0s20f0u2i12: PCI path identifier: domain=0 bus=0 slot=20 func=0 phys_port= dev_port=0 → p0s20f0
wwp0s20f0u2i12: USB name identifier: ports=2 config=1 interface=12 → u2i12
ID_NET_NAME_PATH=wwp0s20f0u2i12
Using default interface naming scheme 'v250'.
ID_NET_NAMING_SCHEME=v250
ID_NET_NAME_MAC=en54ee75cb1dc0
enp0s31f6: MAC address identifier: hw_addr=54:ee:75:cb:1d:c0 → 54ee75cb1dc0
ID_OUI_FROM_DATABASE=Wistron InfoComm(Kunshan)Co.,Ltd.
enp0s31f6: Parsing slot information from sysname "0000:00:1f.6": success
enp0s31f6: dev_port=0
enp0s31f6: PCI path identifier: domain=0 bus=0 slot=31 func=6 phys_port= dev_port=0 → p0s31f6
ID_NET_NAME_PATH=enp0s31f6
Using default interface naming scheme 'v250'.
ID_NET_NAMING_SCHEME=v250
ID_NET_NAME_MAC=en0050b6856d36
hub0: MAC address identifier: hw_addr=00:50:b6:85:6d:36 → 0050b6856d36
ID_OUI_FROM_DATABASE=GOOD WAY IND. CO., LTD.
hub0: Parsing slot information from sysname "0000:00:14.0": success
hub0: dev_port=0
hub0: PCI path identifier: domain=0 bus=0 slot=20 func=0 phys_port= dev_port=0 → p0s20f0
hub0: USB name identifier: ports=4.1.3 config=2 interface=0 → u4u1u3c2
ID_NET_NAME_PATH=enp0s20f0u4u1u3c2
Using default interface naming scheme 'v250'.
ID_NET_NAMING_SCHEME=v250
wlp4s0: addr_assign_type=3, MAC address is not permanent.
wlp4s0: Parsing slot information from sysname "0000:04:00.0": success
wlp4s0: dev_port=0
wlp4s0: PCI path identifier: domain=0 bus=4 slot=0 func=0 phys_port= dev_port=0 → p4s0
ID_NET_NAME_PATH=wlp4s0
On some runs `sleep infinity` run by the user manager uses over 3M of
memory, which is higher than the MemoryHigh= set on testbloat and
testmunch. If no pgscan is generated, then systemd-oomd sorts by memory
usage which leads to a situation where testchill (using 3M) could be
targeted over testbloat (1M-2M).
Fix this by setting reasonable MemoryHigh= values for all of these test
units. Even if somehow testchill throttles a bit at 3M, testbloat and
testmunch should still be trying to use over 100M at memory and will
throttle down to 5M and 6M with the new values. This should reflect
the desired state in pgscan and memory usage during the test run.
Fixes#21684
341890de86 made "bootctl install" create
ESP\MID, in preparation of cf73f65089 that
followed it and created 00-entry-directory.install to make ESP\MID\KVER
if ESP\MID existed ‒ this meant that "bootctl install" followed by
"kernel-install $(uname -r) /boot/vml*$(uname -r) /boot/ini*$(uname -r)"
actually installed the kernel correctly.
Later, 31e57550b5 reverted the first
commit, meaning, that now running those two commands first installs
sd-boot, but then does nothing. Everything appears to work right,
nothing errors out, but no changes are actually done. To the untrained
eye (all of them), even running with -v appears to work:
all the hooks are run, as is depmod, but, again, nothing happens.
This is horrible. Nothing in either manpage suggests what to do
(nor should it, really), but the user is left with a bootloader that
appears fully funxional, since nothing suggests a failure in the output,
but with an unbootable machine, /no way to boot it/, even if they drop
to an EFI shell, since the boot bundle isn't present on the ESP,
and no real recourse even if they boot into a recovery system,
apart from installing like GRUB or whatever.
00- is purely instrumentation for 90-,
and separating one from the other has led to downstream dissatisfaxion
(indeed, the last mentioned commit cited cited exactly that as the
reversion reason), while creating $ENTRY_DIR_ABS is only required
for bootloaders using the BLS, and shouldn't itself toggle anything.
To that end, introduce an /{e,l}/k/install.conf file that allows
overriding the detected layout, and detect it as "bls" if
$BOOT_ROOT/$MACHINE_ID ($ENTRY_DIR_ABS/..) exists, otherwise "other" ‒
if a user wishes to select a different bootloader,
like GRUB, they (or, indeed, the postinst script) can specify
layout=grub. This disables 90- and $ENTRY_DIR_ABS manipulation.
The code was correct, but looked suspicious: we were comparing
strlen(x) with sizeof(y), with looks like an off-by-one. But we actually
want x to be one longer than y, so that's fine. Let's use STRLEN() to
make this more obvious.
While at it, drop unnecessary "_" prefix.
The openssl binary is an optional dependency.
If systemd has been built with OpenSSL support, we want to test its
OpenSSL functionality.
So record a failure message in /failed if the binary is missing.
See https://github.com/systemd/systemd/pull/21724#issuecomment-992707614
link_address_is_dynamic() is costful in general. Call it only when
KeepConfiguration= is set.
Note, it is not necessary to check link->network in the loop, as we have
the assertion for that in the beginning of the function.
If KERNEL_INSTALL_MACHINE_ID is defined in /etc/machine-info, prefer it
over the machine ID from /etc/machine-id. If a machine ID is defined in
neither /etc/machine-info nor in /etc/machine-id, generate a new UUID
and try to write it to /etc/machine-info as KERNEL_INSTALL_MACHINE_ID
and use it as the machine ID if writing it to /etc/machine-info succeeds.
In practice, this means we have a more robust fallback if there's no
machine ID in /etc/machine-id than just using "Default" and allows
image builders to force kernel-install to use KERNEL_INSTALL_MACHINE_ID
by simply writing it to /etc/machine-info themselves.
Otherwise we might miss the "Device path too long" message:
```
[ 21.083274] testsuite-64.sh[374]: swapoff /dev/vda1
[ 21.089841] testsuite-64.sh[376]: ++ mktemp
[ 21.095115] testsuite-64.sh[271]: + logfile=/tmp/tmp.a1MULA35wL
[ 21.095115] testsuite-64.sh[271]: + journalctl -b -q --no-pager -o short-monotonic -p info --grep 'Device path.*vda.?'\'' too long to fit into unit name'
...
[ 21.277360] systemd[1]: testsuite-64.service: Main process exited, code=exited, status=1/FAILURE
[ 21.277508] systemd[1]: testsuite-64.service: Failed with result 'exit-code'.
...
[ 21.323500] systemd[1]: Device path '/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/0000:07:00.0/0000:08:00.0/0000:09:00.0/0000:0a:00.0/0000:0b:00.0/0000:0c:00.0/0000:0d:00.0/0000:0e:00.0/0000:0f:00.0/0000:10:00.0/0000:11:00.0/0000:12:00.0/0000:13:00.0/0000:14:00.0/0000:15:00.0/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.0/0000:1a:00.0/virtio0/block/vda/vda1' too long to fit into unit name, ignoring device.
```
The way that the cryptsetup plugins were built was unnecessarilly complicated.
We would build three static libraries that would then be linked into dynamic
libraries. No need to do this.
While at it, let's use a convenience library to avoid compiling the shared code
more than once.
We want the output .so files to be located in the main build directory,
like with all consumable build artifacts, so we need to maintain the split
between src/cryptsetup/cryptsetup-token/meson.build and the main meson.build
file.
AFAICT, the build artifacts are the same: exported and undefined symbols are
identical. There is a tiny difference in size, but I think it might be caused
by a different build directory name.
It doesn't make much sense to do this, the result is very similar to including
to objects directly in the output binary without going through an intermediate
target.
The linkage of test-libudev was rather strange too: udev_link_with is used to
allow udev to be linked to a static version of libshared, so that udev is not
linked to libshared.so. But here we were using both, defeating the purpose of
udev_link_with. I don't think it matters what the test is linked to, so let's
use the non-static linkage to save space.
The meson default for static_library() are:
build_by_default=true, install=false. We never interact with the
static libraries, and we only care about them as a stepping-stone towards
the installable executables or libraries. Thus let's only build them if
they are a dependency of something else we are building.
While at it, let's drop install:false, since this appears to be the default.
This change would have fixed the issue with lib_import_common failing
to build too: we wouldn't attempt to build it.
In practice this changes very little, because we generally only declare static
libraries where there's something in the default target that will make use of
them. But it seems to be a better pattern to set build_by_default to false.
Use a 'convenience library' to do the compilation once and then link the
objects into all the files that need it. Those files are small, so this probably
doesn't matter too much for speed, but has the advantage that we don't get the
same error four times if something goes wrong.
The library is conditionalized in the same way importd itself, because we
cannot build it without the deps.
The ordering of the service wrt. to udevd is enforced by unit configuration,
so no need to tell the user about this. From users' POV, the only thing that
counts is that the unit is enabled and then the right thing happens.
It is used by udevd and networkd. Since udevd is enabled statically, let's also
change the preset to "on". networkd is opt-in, so let's pull in the generator
when enabling networkd too.
