IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
I wanted to use jinja2 templating here too, but it's hard to get right:
custom_target() strips the executable bit by default (unlike configure_file
apparently). custom_target() has install_mode setting, but it was only added
in meson-0.47, so it can't be used while we support 0.46. And without the
executable bit the test is not invoked properly. For example, "root-unittests"
in the debian package calls test-* after installation, so the executable bit
there is necessary. It would be possible to adjust the file mode after the
fact, but it would make things more complicated.
So let's use the native meson substitutions here. We don't need anything more
fancy.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
https://github.com/systemd/systemd/pull/19316 failed with:
[1065/1670] Linking target systemd-hwdb
--- command ---
14:28:29 /root/src/test/hwdb-test.sh
--- stdout ---
./systemd-hwdb does not exist, please build first
I'm not sure what is going on here… In principle meson says that tests may be
called from any directory, but in practice is was always the build directory.
So far we were relying on systemd-hwdb being present in '.', and this worked.
Either way, it's nicer to pass the exact path, so let's do that.
Normally ls-files prints the full path to files from the repo root. But when
$GIT_WORK_TREE is set, ls-files prints paths relative to the current
directory. When rebasing, $GIT_WORK_TREE is set in the commands executed from
'rebase -x'. This causes problems if meson config is touched and the meson
reconfigures itself. ($GIT_WORK_TREE shouldn't be relevant, since the paths that
ls-files reports don't depend on the work tree, but whatever.) Let's unset
GIT_WORK_TREE to avoid the issue.
$ (cd test; git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
test/dmidecode-dumps/HP-Z600.bin
test/dmidecode-dumps/Lenovo-ThinkPad-X280.bin
test/dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
$ (cd test; GIT_WORK_TREE=$PWD/.. git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
dmidecode-dumps/HP-Z600.bin
dmidecode-dumps/Lenovo-ThinkPad-X280.bin
dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
Fixes#18148.
This allows them to be executed in parallel and also gives us
better reporting.
The dump files are renamed to avoid repeating "dmidecode-dump", since that
string is already present in the subdirectory name.
Add memory_id program to set properties about the physical memory
devices in the system. This is useful on machines with removable memory
modules to show how the machine can be upgraded, and on all devices to
detect the actual RAM size, without relying on the OS accessible amount.
Closes: #16651
All this test does is manipulate text files in a subdir specified with --testroot.
It can be a normal unittest without the overhead of creating a machine image.
As a bonus, also test the .standalone version.
The two timezone files are now installed in the global setup. I am not too
happy about this, but it still seems better than to create a completely
separate image just for this.
Unfortunately meson does not install symlinks, but copies the symlink
destination instead. So symlinks need to be created by a script.
This commit adds both symlinks in test/testsuite-08.units/ and meson
scriptlet calls. Strictly speaking, the first is not necessary, since nothing
reads stuff directly from the source tree.
The man pages state that the '+' prefix in Exec* directives should
ignore filesystem namespacing options such as PrivateTmp. Now it does.
This is very similar to #8842, just with PrivateTmp instead of
PrivateDevices.
job_compare return value is undefined in case the jobs have a loop
between them, so better make a test to make sure transaction cycle
detection catches it.
The test-engine Test2 tests the cycle detection when units a, b and d
all start at once
,-------------------after-----------------,
v |
a/start ---after---> d/start ---after---> b/start
Extend the test with Test11 that adds i.service which causes a and d
stop (by unordered Conflicts=) while starting b. Because stops precede
starts, we effectively eliminate the job cycle and all transaction jobs
should be applicable.
,-------------------after-----------------,
v |
a/stop <---after--- d/stop <---after--- b/start
. . ^
. . |
'. . . . . . . . . i/start ---after------'
In cgroup v2 we have protection tunables -- currently MemoryLow and
MemoryMin (there will be more in future for other resources, too). The
design of these protection tunables requires not only intermediate
cgroups to propagate protections, but also the units at the leaf of that
resource's operation to accept it (by setting MemoryLow or MemoryMin).
This makes sense from an low-level API design perspective, but it's a
good idea to also have a higher-level abstraction that can, by default,
propagate these resources to children recursively. In this patch, this
happens by having descendants set memory.low to N if their ancestor has
DefaultMemoryLow=N -- assuming they don't set a separate MemoryLow
value.
Any affected unit can opt out of this propagation by manually setting
`MemoryLow` to some value in its unit configuration. A unit can also
stop further propagation by setting `DefaultMemoryLow=` with no
argument. This removes further propagation in the subtree, but has no
effect on the unit itself (for that, use `MemoryLow=0`).
Our use case in production is simplifying the configuration of machines
which heavily rely on memory protection tunables, but currently require
tweaking a huge number of unit files to make that a reality. This
directive makes that significantly less fragile, and decreases the risk
of misconfiguration.
After this patch is merged, I will implement DefaultMemoryMin= using the
same principles.
Some controllers (like the CPU controller) have a performance cost that
is non-trivial on certain workloads. While this can be mitigated and
improved to an extent, there will for some controllers always be some
overheads associated with the benefits gained from the controller.
Inside Facebook, the fix applied has been to disable the CPU controller
forcibly with `cgroup_disable=cpu` on the kernel command line.
This presents a problem: to disable or reenable the controller, a reboot
is required, but this is quite cumbersome and slow to do for many
thousands of machines, especially machines where disabling/enabling a
stateful service on a machine is a matter of several minutes.
Currently systemd provides some configuration knobs for these in the
form of `[Default]CPUAccounting`, `[Default]MemoryAccounting`, and the
like. The limitation of these is that Default*Accounting is overrideable
by individual services, of which any one could decide to reenable a
controller within the hierarchy at any point just by using a controller
feature implicitly (eg. `CPUWeight`), even if the use of that CPU
feature could just be opportunistic. Since many services are provided by
the distribution, or by upstream teams at a particular organisation,
it's not a sustainable solution to simply try to find and remove
offending directives from these units.
This commit presents a more direct solution -- a DisableControllers=
directive that forcibly disallows a controller from being enabled within
a subtree.
There isn't really much need to keep them separate. Anything which is a good
corpus entry can be used as a smoke test, and anything which which is a
regression test can just as well be inserted into the corpus.
The only functional difference from this patch (apart from different paths in
output) is that the regression tests are now zipped together with the rest of
the corpus.
$ meson configure build -Dslow-tests=true && ninja -C build test
...
307/325 fuzz-dns-packet:issue-7888:address OK 0.06 s
308/325 fuzz-dns-packet:oss-fuzz-5465:address OK 0.04 s
309/325 fuzz-journal-remote:crash-5a8f03d4c3a46fcded39527084f437e8e4b54b76:address OK 0.07 s
310/325 fuzz-journal-remote:crash-96dee870ea66d03e89ac321eee28ea63a9b9aa45:address OK 0.05 s
311/325 fuzz-journal-remote:oss-fuzz-8659:address OK 0.05 s
312/325 fuzz-journal-remote:oss-fuzz-8686:address OK 0.07 s
313/325 fuzz-unit-file:oss-fuzz-6884:address OK 0.06 s
314/325 fuzz-unit-file:oss-fuzz-6885:address OK 0.05 s
315/325 fuzz-unit-file:oss-fuzz-6886:address OK 0.05 s
316/325 fuzz-unit-file:oss-fuzz-6892:address OK 0.05 s
317/325 fuzz-unit-file:oss-fuzz-6897:address OK 0.05 s
318/325 fuzz-unit-file:oss-fuzz-6897-evverx:address OK 0.06 s
319/325 fuzz-unit-file:oss-fuzz-6908:address OK 0.07 s
320/325 fuzz-unit-file:oss-fuzz-6917:address OK 0.07 s
321/325 fuzz-unit-file:oss-fuzz-6977:address OK 0.13 s
322/325 fuzz-unit-file:oss-fuzz-6977-unminimized:address OK 0.12 s
323/325 fuzz-unit-file:oss-fuzz-7004:address OK 0.05 s
324/325 fuzz-unit-file:oss-fuzz-8064:address OK 0.05 s
325/325 fuzz-unit-file:oss-fuzz-8827:address OK 0.52 s
We have "installed tests", but don't provide an easy way to run them.
The protocol is very simple: each test must return 0 for success, 77 means
"skipped", anything else is an error. In addition, we want to print test
output only if the test failed.
I wrote this simple script. It is pretty basic, but implements the functions
listed above. Since it is written in python it should be easy to add option
parsing (like running only specific tests, or running unsafe tests, etc.)
I looked at the following alternatives:
- Ubuntu root-unittests: this works, but just dumps all output to the terminal,
has no coloring.
- @ssahani's test runner [2]
It uses the unittest library and the test suite was implented as a class, and
doesn't implement any of the functions listed above.
- cram [3,4]
cram runs our tests, but does not understand the "ignore the output" part,
has not support for our magic skip code (it uses hardcoded 80 instead),
and seems dead upstream.
- meson test
Here the idea would be to provide an almost-empty meson.build file under
/usr/lib/systemd/tests/ that would just define all the tests. This would
allow us to reuse the test runner we use normally. Unfortunately meson requires
a build directory and configuration to be done before running tests. This
would be possible, but seems a lot of effort to just run a few binaries.
[1] 242c96addb/debian/tests/root-unittests
[2] https://github.com/systemd/systemd-fedora-ci/blob/master/upstream/systemd-upstream-tests.py
[3] https://bitheap.org/cram/
[4] https://pypi.org/project/pytest-cram/Fixes#10069.
Back in 08318a2c5a, value "false" was enabled for
'-Dtests=', but various tests were not conditionalized properly. So even with
-Dtests=false -Dslow-tests=false we'd run 120 tests. Let's make this consistent.
