IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Readahead has all sorts of bad side effects depending on your
storage media. On rotating disks, it may be degrading startup
performance if enough requests are queued spanning linearly
over all blocks early at boot, and mount, blkid and friends
want to insert reads to the start of these block devices after.
The end result is that on spinning disks with ext3/4 that udev
and mounts take a very long time, and nothing really happens until
readahead is completely finished.
This has the net effect that the CPU is almost entirely idle
for the entire period that readahead is working. We could have
finished starting up quite a lot of services in this time if
we were smarter at how we do readahead.
This patch sorts all requests into 2 second "chunks" and sub-sorts
each chunk by block. This adds a single cross-drive seek per "chunk"
but has the benefit that we will have a lot of the blocks we need
early on in the boot sequence loaded into memory faster.
For a comparison of how before/after bootcharts look (ext4 on a
mobile 5400rpm 250GB drive) please look at:
http://foo-projects.org/~sofar/blocked-tests/
There are bootcharts in the "before" and "after" folders where you
should be able to see that many low-level services finish 5-7
seconds earlier with the patch applied (after).
With the conversion from pci-db + usb-db to hwdb, the property
got accitentially renamed.
Move the name back to the long established identifier *MODEL*
instead of *PRODUCT*.
$ git grep -l ID_MODEL_FROM_DATABASE
hwdb/20-pci-vendor-model.hwdb
hwdb/20-usb-vendor-model.hwdb
hwdb/ids-update.pl
man/systemd.device.xml
rules/78-sound-card.rules
src/core/device.c
src/cryptsetup/cryptsetup.c
Please see the documentation (e.g. pydoc3 systemd.daemon) for full
description. As usual, systemd._daemon wraps the raw interface, while
systemd.daemon provides the more pythonic API. sd_listen_fds,
sd_booted, sd_is_fifo, sd_is_socket, sd_is_socket_unix,
sd_is_socket_inet, sd_is_mq, and SD_LISTEN_FDS_START are currently
wrapped.
First, rename root-fs.target to initrd-root-fs.target to clarify its usage.
Mount units with "x-initrd-rootfs.mount" are now ordered before
initrd-root-fs.target. As we sometimes construct /sysroot mounts in
/etc/fstab in the initrd, we want these to be mounted before the
initrd-root-fs.target is active.
initrd.target can be the default target in the initrd.
(normal startup)
:
:
v
basic.target
|
______________________/|
/ |
| sysroot.mount
| |
| v
| initrd-root-fs.target
| |
| v
| initrd-parse-etc.service
(custom initrd services) |
| v
| (sysroot-usr.mount and
| various mounts marked
| with fstab option
| x-initrd.mount)
| |
| v
| initrd-fs.target
| |
\______________________ |
\|
v
initrd.target
|
v
initrd-cleanup.service
isolates to
initrd-switch-root.target
|
v
______________________/|
/ |
| initrd-udevadm-cleanup-db.service
| |
(custom initrd services) |
| |
\______________________ |
\|
v
initrd-switch-root.target
|
v
initrd-switch-root.service
|
v
switch-root
https://bugs.freedesktop.org/show_bug.cgi?id=62085
/usr/lib/gcc/x86_64-pc-linux-gnu/4.6.3/../../../../lib64/libsystemd-login.so:
undefined reference to `sd_listen_fds'
In ee465038ce 'build-sys: break dependency loop between
libsystemd-id128.la and -shared.la', a partial fix was applied, and
the use of functions from libsystemd-id128 was removed from
libsystemd-shared. Nevertheless, fdset.c was still using sd_listen_fds,
so libsystemd-login should be linked against libysystemd-daemon
or libsystemd-daemon-internal.
Tested-by: Elias Probst <mail@eliasprobst.eu>
Instead of using local-fs*.target in the initrd, use root-fs.target for
sysroot.mount and initrd-fs.target for /sysroot/usr and friends.
Using local-fs.target would mean to carry over the activated
local-fs.target to the isolated initrd-switch-root.target and thus in
the real root. Having local-fs.target already active after
deserialization causes ordering problems with the real root services and
targets.
We better isolate to targets for initrd-switch-root.target, which are
only available in the initrd.
This should help readers of the man or HTML pages know if the documentation
is out of date. An alternative to use a date generated from 'git log' was
considered, but since we try to keep user visible documentation up to date,
showing the project version should be enough.
Let's update bootchar to share the coding style a bit more with the rest
of the package.
- Some tabs/spaces fixes
- add #pragma to header
- split up header so that we have a 1:1 relation between .c and .h files
like everywhere else
- Prefix user command line arguments/configuration settings with "arg_".
- other coding style fixes
SMACK is the Simple Mandatory Access Control Kernel, a minimal
approach to Access Control implemented as a kernel LSM.
The kernel exposes the smackfs filesystem API through which access
rules can be loaded. At boot time, we want to load the access rules
as early as possible to ensure all early boot steps are checked by Smack.
This patch mounts smackfs at the new location at /sys/fs/smackfs for
kernels 3.8 and above. The /smack mountpoint is not supported.
After mounting smackfs, rules are loaded from the usual location.
For more information about Smack see:
http://www.kernel.org/doc/Documentation/security/Smack.txt
Since sd_journal_reliable_fd wasn't exported before, it is as if
it was added now. Library "current" number must be bumped.
michich> Someone links with the fixed version and produces a RPM with
his program. The RPM will happily install on a system with an
old systemd version (the deps will appear fine), but the
program will fail to run.
Previously all journal files were owned by "adm". In order to allow
specific users to read the journal files without granting it access to
the full "adm" powers, introduce a new specific group for this.
"systemd-journal" has to be created by the packaging scripts manually at
installation time. It's a good idea to assign a static UID/GID to this
group, since /var/log/journal might be shared across machines via NFS.
This commit also grants read access to the journal files by default to
members of the "wheel" and "adm" groups via file system ACLs, since
these "almost-root" groups should be able to see what's going on on the
system. These ACLs are created by "make install". Packagers probably
need to duplicate this logic in their postinst scripts.
This also adds documentation how to grant access to the journal to
additional users or groups via fs ACLs.
Split the large bash completion script into separate, smaller files each
named after the binary it is used for and move the files to
/usr/share/bash-completion/completions. This way the completions can be
loaded on demand and we only install the completions for the tools we
actually build. The old path /etc/bash_completion.d/ is deprecated and
will disappear in the future.
This will:
* mount all configured filesystems (typically the rootfs on /sysroot)
* reload the configuration to pick up anything from the mounted fs (typically
/sysroot/etc/fstab)
* mount any newly configured filesystems (typically /usr on /sysroot/usr, if
applicable)
* shut-down and clean-up any daemons running in the initramfs (typically udevd)
* switch-root to /sysroot and start the real init
For an example of what files should be included in an initramfs based on this
see
<https://mailman.archlinux.org/pipermail/arch-projects/2013-February/003628.html>.
Cc: Harald Hoyer <harald.hoyer@gmail.com>
Cc: Dave Reisner <d@falconindy.com>
* python-systemd-reader:
python-systemd: rename Journal to Reader
build-sys: upload python documentation to freedesktop.org
systemd-python: add Journal class for reading journal
python: build html docs using sphinx
journalct: also print Python code in --new-id
python: utilize uuid.UUID in logging
python: add systemd.id128 module
... and 34 other commits
In short: python module systemd.id128 is added, and existing
systemd.journal gains a new class systemd.journal.Reader, which can be
used to iterate over journal entries. Documentation is provided, and
accessible under e.g.
pydoc3 systemd.journal.Reader
or
firefox http://www.freedesktop.org/software/systemd/man/python-systemd/
__REALTIME_TIMESTAMP and __MONOTONIC_TIMESTAMP return ints.
It doesn't make sense to convert to string, just to convert
back to a number later on.
Also try to follow systemd rules for indentation.
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
This doesn't need to be passed, as it's handled by libtool. Since the
default for autoconf is --disable-static, this change is effectively a
noop. It only matters if you pass --enable-static, in which case the
static libs for systemd libraries will actually be built.
Nitpicky, but this only affects systemd libs. The override for the
other libs remains since these libs are always loaded dynamically and
never compiled staticly.
Written by Peeters Simon <peeters.simon@gmail.com>.
Makefile stuff and cleaned up a bit by Auke Kok <auke-jan.h.kok@intel.com>.
Some code inspired by Marc-Antoine Perennou <Marc-Antoine@Perennou.com>.
Now, actually check if the environment variable names and values used
are valid, before accepting them. With this in place are at some places
more rigid than POSIX, and less rigid at others. For example, this code
allows lower-case environment variables (which POSIX suggests not to
use), but it will not allow non-UTF8 variable values.
All in all this should be a good middle ground of what to allow and what
not to allow as environment variables.
(This also splits out all environment related calls into env-util.[ch])
After d848b9cbfa 'Move generic specifier functions to shared' libudev
depends (through) libsystemd-shared.la on libsystemd-id128.so. The
problem only appears when the linker does not support --gc-sections
and manifests itself as the inability to resolve sd_id128_get_machine
and other libsystemd-id128 functions, which aren't really used.
In other cases where multiple directories are searched for unit files,
the list of directories is described in the man page describing the
format. I think this makes sense too in case of systemd directories,
since the systemd(1) manpage already has an overview of many different
topics.
man rules were repeating the same information in too many places,
which was error prone. Those rules can be easily generated from .xml
files. For efficiency and because python is not a required dependency,
Makefile-man.am is only regenerated when requested with
make update-man-list
If no metadata in man/*.xml changed, this file should not change. So
only when a new man page or a new alias is added, this file should
show up in 'git diff'. The change should then be committed.
If the support for building from git without python was dropped, we
could drop Makefile-man.am from version control. This would also
increase the partial build time (since more stuff would be rebuild
whenever sources in man/*.xml would be modified), so it would probably
wouldn't be worth it.
adds test of:
strv_find
strv_find_prefix
strv_overlap
strv_sort
streq_ptr
first_word
Splits tests of util.c into own file to avoid clutter as we add more.
Removed a few prints and uses _cleanup_free_ to make the tests more focused.
Sometimes it is useful to look at them, and they don't take
up any significant amount of space. Keeping them also avoids
the message about files being removed at the end of make
run.
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
Based-on-patch-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
cppcheck reported:
[src/bootchart/svg.c:791]: (error) Mismatching allocation and deallocation: f
The idea is to make Makefile.am more declarative and avoid
repetitions. Redeclaring unit links as variables also makes
it easier to conditionally install only some of them.
In the x32 ABI, syscall numbers start at 0x40000000. Mask that bit on
x32 for lookups in the syscall_names array and syscall_filter and ensure
that syscall.h is parsed correctly.
[zj: added SYSCALL_TO_INDEX, INDEX_TO_SYSCALL macros.]
This allows us to print simple performance data of all parts of the boot now:
- firmware
- boot loader
- kernel
- initrd
- userspace
This only works for bootloaders which support passing TSC data via EFI
variables. As of now that's only gummiboot.
We no longer allow early-boot init scripts, however in late boot the
syslog socket and local mounts are established anyway, so let's simplify
our dep graph a bit.
If $syslog doesn't resolve to syslog.target anymore there's no reason to
keep syslog.target around anymore. Let's remove it.
Note that many 3rd party service unit files order themselves after
syslog.target. These will be dangling dependencies now, which should be
unproblematic, however.
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
Systemd should not introduce any new facilities. Distributions which still
need to support their non-standard/legacy facilities should add them as
patches to their packaging.
The following facilities are no longer recognized:
$x-display-manager
$mail-transfer-agent
$mail-transport-agent
$mail-transfer-agent
$smtp
$null
This target is no longer available:
mail-transfer-agent.target
This way we also get a man page. The output is not as polished.
I hope that it doesn't matter too much.
index.html is not generated now, the page is called
systemd.index.html. If necessary, an install hook should be added.
Bootchart is renamed to 'systemd-bootchart' and installed as
/usr/lib/systemd/systemd-bootchart. The configuration file
will reside in /etc/systemd/bootchart.conf.
Define KEEP_LA_FILES to keep them.
The hook is repeated because both install-exec-hook and
install-data-hook can install libraries and with parallel make
it's not possible to predict which one will run first.
http://lists.freedesktop.org/archives/systemd-devel/2013-January/008016.html
tl;dr: Libtool .la files are not very useful for linking linux
libraries.
Note that there are still some rome for cleanups. In particular,
the .la files are now installed, which we probably don't want; and
some of the macros in Makefile.am are likely redundan.
The variable assignment operator was introduced in make 3.82 and thus
breaks "make install" with older versions of make. Since "=" is optional
in make 3.82 it is safe to drop.
Python binary used in the she-bang line in installed
scripts can be set with ./configure PYTHON_BINARY=...
Defaults to the same path as python used during compilation.
Adding --version makes systemd-analyze behave consistently with the
rest of installed programs.
The lines in ./configure output are reordered to keep all yes/no lines
separate. I think that this makes the output clearer.
This also drops automatic selection of the rc local scripts
based on the local distro. Distributions now should specify the paths
of the rc-local and halt-local scripts on the configure command line.
Commit f934051c4d broke the build
because it made libsystemd-shared call sd_listen_fds() which is
defined in libsystemd-daemon.
This is a bit of a contortion because libsystemd-shared.la is a
noinst_LTLIBRARY, but libtool should do the right thing here and emit
DT_NEEDED on libsystemd-daemon.so for things that consume
libsystemd-shared.la.
