IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
New debug verb that enables or disables the service runtime watchdogs
and emergency actions during runtime. This is the systemd-analyze
version of the systemd.service_watchdogs command line option.
This little new command can parse, validate, normalize calendar events,
and calculate when they will elapse next. This should be useful for
anyone writing calendar events and who'd like to validate the expression
before running them as timer units.
They’re counterparts to the existing set-log-level and set-log-target
verbs, simply printing the current value to stdout. This makes it
slightly easier to temporarily change the log level and/or target and
then restore the old value(s).
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
SYSTEMD_UNIT_PATH=foobar: systemd-analyze verify barbar/unit.service
will load units from barbar/, foobar/, /etc/systemd/system/, etc.
SYSTEMD_UNIT_PATH= systemd-analyze verify barbar/unit.service
will load units only from barbar/, which is useful e.g. when testing
systemd's own units on a system with an older version of systemd installed.
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
We would require a match against all three: patterns specified
with --to, with --from, and as positional arguments to show an
edge. This does not seem useful. Let instead the positional args
behave like they were specified in both --to and --from, which is
fairly intuitive and should be more useful.
This allows customization of the arguments used by less. The main
motivation is that some folks might not like having --no-init on every
invocation of less.
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous
comma placement fixes…
Highligts in this particular commit:
- the "unsigned" type qualifier is completed to form a full type
"unsigned int"
- alphabetic -> lexicographic (that way we automatically define how
numbers get sorted)
"systemctl set-log-level" is a command for analysis and tracing hence
"systemd-analyze" should be the better home for it, thus allowing us to
make the overly large "systemctl" a bit smaller.
It's an analysis command and its format is explicitly not covered by any
stability guarantees, hence move away from systemctl and into
systemd-analyze, minimizing the already large interface of systemctl a
bit.
This patch also adds auto-paging to the various systemd-analyze commands
where that makes sense
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
When manpages are displayed on a terminal, <literal>s are indistinguishable
from surrounding text. Add quotes everywhere, remove duplicate quotes,
and tweak a few lists for consistent formatting.
https://bugzilla.redhat.com/show_bug.cgi?id=874631
Make "systemd-analyze dot" output only lines with units matching
given glob(7) patterns. Add --from-pattern and --to-pattern options.
Without any patterns all relationships are printed as before.
A relationship must match the follwing expression:
(isempty(from) || from[0] || from[1] || .. || from[n]) &&
(isempty(to) || to[0] || to[1] || .. || to[n]) &&
(isempty(P) || P[0] || P[1] || ... || P[n])
where from[] and to[] are lists of patterns provided with subsequent
--from-pattern and --to-pattern respectively. P[] is a list of additional
patterns provided after the "dot" subcommand.
