IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
'! grep -v' does *not* test that there are no matching lines.
Instead, it checks that whether there are any non-matching lines.
And of course, for the test to fail, '! grep' cannot be part of
an expression with &&.
We were grepping for 'hello world', and in the namespace we would
match on 'hello world', and outside, on 'echo "hello world"'. When
the condition check was fixed, the test gave a false positive.
We were invoking 'systemd-run bash', but the test invoked by bash
was not effective. When the result of that check is propagated, the
outer command fails.
create_fifo() was added in a2fc2f8dd3, and
would always ignore failure. The test was trying to fail in this case, but
we actually don't fail, which seems to be correct. We didn't notice before
because the test was ineffective.
To make things consistent, generally log at warning level, but don't propagate
the error. For symlinks, log at debug level, as before.
For 'e', failure is not propagated now. The test is adjusted to match.
I think warning is appropriate in most cases: we do not expect a device node to
be replaced by a different device node or even a non-device file. This would
most likely be an error somewhere. An exception is made for symlinks, which are
mismatched on purpose, for example /etc/resolv.conf. With this patch, we don't
get any warnings with the any of the 74 tmpfiles.d files, which suggests that
increasing the warning levels will not cause too many unexpected warnings. If
it turns out that there are valid cases where people have expected mismatches
for non-symlink types, we can always decrease the log levels again.
Quoting of values differs between distros: Fedora doesn't quote the ID_
fields, but CentOS does.
Adjust the test checks to account for this.
Fixes#19242
"! test ..." does not cause the script to fail, even with set -e.
IIUC, bash treats this command as part of an expression line, as it
would if 'test ... && ...' was used. Failing expression lines do not
terminate the script.
This fixes the obvious cases by changing '! test' → 'test !'.
Then the inversion happens internally in test and bash will propagate
the failure.
Add an --extension parameter to portablectl, and new DBUS methods
to attach/detach/reattach/inspect.
Allows to append separate images on top of the root directory (os-release
will be searched in there) and mount the images using an overlay-like
setup (unit files will be searched in there) using the new ExtensionImages
service option.
When trying to calculate the next firing of 'Sun *-*-* 01:00:00', we'd fall
into an infinite loop, because mktime() moves us "backwards":
Before this patch:
tm_within_bounds: good=0 2021-03-29 01:00:00 → 2021-03-29 00:00:00
tm_within_bounds: good=0 2021-03-29 01:00:00 → 2021-03-29 00:00:00
tm_within_bounds: good=0 2021-03-29 01:00:00 → 2021-03-29 00:00:00
...
We rely on mktime() normalizing the time. The man page does not say that it'll
move the time forward, but our algorithm relies on this. So let's catch this
case explicitly.
With this patch:
$ TZ=Europe/Dublin faketime 2021-03-21 build/systemd-analyze calendar --iterations=5 'Sun *-*-* 01:00:00'
Normalized form: Sun *-*-* 01:00:00
Next elapse: Sun 2021-03-21 01:00:00 GMT
(in UTC): Sun 2021-03-21 01:00:00 UTC
From now: 59min left
Iter. #2: Sun 2021-04-04 01:00:00 IST
(in UTC): Sun 2021-04-04 00:00:00 UTC
From now: 1 weeks 6 days left <---- note the 2 week jump here
Iter. #3: Sun 2021-04-11 01:00:00 IST
(in UTC): Sun 2021-04-11 00:00:00 UTC
From now: 2 weeks 6 days left
Iter. #4: Sun 2021-04-18 01:00:00 IST
(in UTC): Sun 2021-04-18 00:00:00 UTC
From now: 3 weeks 6 days left
Iter. #5: Sun 2021-04-25 01:00:00 IST
(in UTC): Sun 2021-04-25 00:00:00 UTC
From now: 1 months 4 days left
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1941335.
otherwise udev complains about the file being world-writable:
systemd-udevd[228]: Configuration file /etc/udev/rules.d/00-set-LD_PRELOAD.rules is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
Fixes: systemd/systemd-centos-ci#354
When running TEST-22 under ASan, there's a chain of events which causes
`stat` to output an extraneous ASan error message, causing following
fail:
```
+ test -d /tmp/d/1
++ stat -c %U:%G:%a /tmp/d/1
==82==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.
+ test = daemon:daemon:755
.//usr/lib/systemd/tests/testdata/units/testsuite-22.02.sh: line 24: test: =: unary operator expected
```
This is caused by `stat` calling nss which in Arch's configuration calls
the nss-systemd module, that pulls in libasan which causes the $LD_PRELOAD
error message, since `stat` is an uninstrumented binary.
The $LD_PRELOAD variable is explicitly unset for all testsuite-* services
since it causes various issues when calling uninstrumented libraries, so
setting it globally is not an option. Another option would be to set
$LD_PRELOAD for each `stat` call, but that would unnecessarily clutter
the test code.
This test would normally get stuck when trying to mount the verity image
due to:
systemd-udevd[299]: dm-0: '/usr/sbin/dmsetup udevflags 6293812'(err) '==371==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.'
systemd-udevd[299]: dm-0: Process '/usr/sbin/dmsetup udevflags 6293812' failed with exit code 1
...
systemd-udevd[299]: dm-0: '/usr/sbin/dmsetup udevcomplete 6293812'(err) '==372==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.'
systemd-udevd[299]: dm-0: Process '/usr/sbin/dmsetup udevcomplete 6293812' failed with exit code 1.
systemd-udevd[299]: dm-0: Command "/usr/sbin/dmsetup udevcomplete 6293812" returned 1 (error), ignoring.
so let's add a simple udev rule which sets $LD_PRELOAD for the block
subsystem.
Also, install the ASan library along with necessary dependencies into
the verity minimal image, to get rid of the annoying (yet harmless)
errors about missing library from $LD_LIBRARY.
The fuzzer seems to have no trouble with this sample. It seems that the
problem reported in the bug is not caused by the match parsing code. But
let's add the sample just in case.
https://bugzilla.redhat.com/show_bug.cgi?id=1935084
This fuzzer is based on test-bus-match. Even the initial corpus is
derived entirely from it.
https://bugzilla.redhat.com/show_bug.cgi?id=1935084 shows an crash
in bus_match_parse(). I checked the coverage stats on oss-fuzz, and
sadly existing fuzzing did not cover this code at all.
When running integration tests under sanitizers D-Bus fails to
shutdown cleanly, causing unnecessary noise in the logs:
```
dbus-daemon[272]: ==272==LeakSanitizer has encountered a fatal error.
dbus-daemon[272]: ==272==HINT: For debugging, try setting environment variable LSAN_OPTIONS=verbosity=1:log_threads=1
dbus-daemon[272]: ==272==HINT: LeakSanitizer does not work under ptrace (strace, gdb, etc)
```
Since we're not "sanitizing" D-Bus anyway let's disable LSan's at_exit
check for the dbus.service to get rid of this error.
freep() has it's own definition, so I missed it in fd421c4adc.
Again, there is a small growth, but the compiler should be able to optimize it away:
-Dbuildtype=debug:
-rwxrwxr-x 1 zbyszek zbyszek 4106816 Feb 19 12:52 build/libsystemd.so.0.30.0
-rwxrwxr-x 1 zbyszek zbyszek 7492952 Feb 19 12:52 build/src/shared/libsystemd-shared-247.so
-rwxrwxr-x 1 zbyszek zbyszek 4472624 Feb 19 12:53 build/systemd
-rwxrwxr-x 1 zbyszek zbyszek 4107056 Feb 19 13:03 build/libsystemd.so.0.30.0
-rwxrwxr-x 1 zbyszek zbyszek 7493480 Feb 19 13:03 build/src/shared/libsystemd-shared-247.so
-rwxrwxr-x 1 zbyszek zbyszek 4472760 Feb 19 13:03 build/systemd
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=31055.
--no-legend is replaced by --legend=no.
--quiet now implies --legend=no, but --legend=yes may be used to override that.
--quiet controls hints and warnings and such, and --legend controls just the
legends. I think it makes sense to allow both to controlled independently, in
particular --quiet --legend makes sense when using systemctl in a script to
provide some user-visible output.
Fixes#18560.
When a subshell is used ('make' or 'make all') the LOOPDEV environment
variable, which is used to store the opened loop device, is lost.
So the cleanup on trap/exit doesn't do anything, and the loop
device used to mount the test image is left around.
Avoid using a subshell to fix the issue.
With all the preparatory work in previous PRs, we can now call static destructors
repeatedly without issue. We need to do it here so that global variables allocated
during parsing are properly freed.
The source package in the apt cache might be older than the
packaging from salsa.debian.org/systemd-team/systemd so it might not
list all the current binary packages.
This is currently the case for systemd-timesyncd, so TEST-30 fails.
Simply grep the control file rather than using apt-cache when iterating
over the packages contents.
Similar to DHCPv4's UseHostname option, add a UseFQDN config option in
[DHCPv6] to set the system's transient hostname if the FQDN option is
set in the DHCPv6 response from the server.
Add 'reattach' verb to portablectl, and corresponding DBUS interface
to systemd-portabled.
Takes the same parameters as 'attach', but it will do a 'detach' (and
it will refuse to proceed if it cannot be done) first, matching on
the unversioned prefix of the new image. Eg:
portablectl reattach /tmp/foo_2.raw
will cause foo_1.raw to be detached, and foo_2.raw to be attached.
The key difference with a manual 'detach old' plus 'attach new' is that
the running units are not disturbed until after the attach completed,
and if --now is passed they are then restarted.
A 'detach' is not allowed normally if the units are running.
By using a restart-after-deploy method, 'reattach' allows for minimal
interruption of service and also for features that only work on restart
(eg: file descriptor store) to work as intended.
The DBUS interface returns two lists: first the removals from the detach
that were not immediately re-added in the attach, so that the caller
can stop the relevant units, and then the list of additions that are
either new or updates, so that the caller can restart/enable the
relevant units. portablectl already implements this with the existing
--now/--enable switches.
Binaries on the latest Arch Linux use `call` instructions instead of
`callq`, which breaks the ASan detection and eventually the image
building process (due to insufficient space).
Does what the name suggests. Obviously inspired by sudoers, but note that
our tools are not supposed to be installed suid, so there is no privilege
boundary to cross here.
There may be situations where a cgroup should be protected from killing
or deprioritized as a candidate. In FB oomd xattrs are used to bias oomd
away from supervisor cgroups and towards worker cgroups in container
tasks. On desktops this can be used to protect important units with
unpredictable resource consumption.
The patch allows systemd-oomd to understand 2 xattrs:
"user.oomd_avoid" and "user.oomd_omit". If systemd-oomd sees these
xattrs set to 1 on a candidate cgroup (i.e. while attempting to kill something)
AND the cgroup is owned by root, it will either deprioritize the cgroup as
a candidate (avoid) or remove it completely as a candidate (omit).
Usage is restricted to root owned cgroups to prevent situations where an
unprivileged user can set their own cgroups lower in the kill priority than
another user's (and prevent them from omitting their units from
systemd-oomd killing).
Since the test suite overhaul, the test units are now under
/usr/lib/systemd/tests/testdata/tetsuite-06.units with
system_u:object_r:lib_t context. This causes an AVC denial, since the
systemd unit files are expected to have the
system_u:object_r:systemd_unit_file_t context. Let's fix this by using a
custom file context definition.
As we usually (unfortunately not always though) do not use abbreviations.
Tx may be standard abbreviation, but we already have e.g.
TransmitChecksumOffload=. So, let's use Transmit instead of Tx.
Follow-up for ef4a91a7e8.
Implement directives `NoExecPaths=` and `ExecPaths=` to control `MS_NOEXEC`
mount flag for the file system tree. This can be used to implement file system
W^X policies, and for example with allow-listing mode (NoExecPaths=/) a
compromised service would not be able to execute a shell, if that was not
explicitly allowed.
Example:
[Service]
NoExecPaths=/
ExecPaths=/usr/bin/daemon /usr/lib64 /usr/lib
Closes: #17942.
This test doesn't require the tests to be installed, so it must manually
install required test services and targets itself, including the default
target of testsuite.target
Also use $TEST_UNITS_DIR which is set by test-functions instead of
calculating the path
The script currently parses either 'clean' or 'clean-again' as wanting
to clean both before and after running tests. This fixes that to split
the action up; clean runs before tests, clean-again after; and also
verifies the parameter(s) before passing them to make.
Add NO_BUILD var to allow testing with no local build, by installing
local systemd files into the image.
This only works for debian-like distros currently, that use the
tools 'apt' and 'dpkg' for package management.
The $BUILD_DIR is only used in test-functions, and doesn't need to
be specified in any other scripts. Additionally, to be able to allow
the integration test suite to be run against locally installed binaries,
instead of built binaries, moving BUILD_DIR logic completely into
test-functions allows later patches to be simpler.
As LLDP thing does not get involved in the link status, `networkctl lldp`
may not provide an expected information even if the link is in
'configured' state.
Fixes#17360.
Building custom images for each test takes a lot of time.
Build the default one, and if the test needs incompatible changes
just copy it and extend it instead.
This parameter allows configuring the activation policy for an interface,
meaning how it manages the interface's administrative state (IFF_UP flag).
The policy can be configured to bring the interface either up or down when
the interface is (re)configured, to always force the interface either up or
down, or to never change the interface administrative state.
If the interface is bound with BindCarrier=, its administrative state is
controlled by the interface(s) it's bound to, and this parameter is forced
to 'bound'.
This changes the default behavior of how systemd-networkd sets the IFF_UP
flag; previously, it was set up (if not already up) every time the
link_joined() function was called. Now, with the default ActivationPolicy=
setting of 'up', it will only set the IFF_UP flag once, the first time
link_joined() is called, during an interface's configuration; and on
the first link_joined() call each time the interface is reconfigured.
Fixes: #3031Fixes: #17437
This reverts commit 73484ecff9.
3976f372ae moved libudev.so to be built in the
main directory, so this addition to $LD_LIBRARY_PATH is now obsolete.
After that commit, we build the following shared libraries:
build/libnss_myhostname.so.2
build/libnss_mymachines.so.2
build/libnss_resolve.so.2
build/libnss_systemd.so.2
build/libsystemd.so.0.30.0
build/libudev.so.1.7.0
build/pam_systemd.so
build/pam_systemd_home.so
build/src/boot/efi/stub.so
build/src/boot/efi/systemd_boot.so
build/src/shared/libsystemd-shared-247.so
EFI stubs don't matter, and libsystemd-shared-nnn.so is loaded through rpath,
and is doesn't need to and shouldn't be in $LD_LIBRARY_PATH. In effect, we only
ever need to add the main build directory to the search path.
Not all optional libraries might be available on developers machines,
so log and skip.
Also some pkg-config files are broken (eg: tss2 on Debian Stable) so
skip if the required variables are missing, and improve logs.
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
machinectl fails since 21935150a0 as it's now
mounting onto a file descriptor in a target namespace, without joining the
target's PID namespace.
Note that it's not enough to setns CLONE_NEWPID, but a double-fork is required
as well, as implemented by namespace_fork().
Add a test case to TEST-13-NSPAWN to cover this use case.
The cmp in ExecStartPost= was actually failing – ExecStartPost= has the
same StandardOutput as the rest of the service, so the output file is
truncated before cmp can compare it with the expected output – but the
test still passed because test_exec_standardoutput_truncate() calls
test(), which only checks the main result, rather than test_service(),
which checks the result of the whole service. Fix the test by merging
the ExecStartPost= into the ExecStart= – the cmp has to be part of the
same command line as the cat so that the file is not truncated between
the two processes.
This adds the ability to specify truncate:PATH for StandardOutput= and
StandardError=, similar to the existing append:PATH. The code is mostly
copied from the related append: code. Fixes#8983.
This adds support for a new kernel root verity command line option
"verity_root_options=" which controls the behaviour of dm-verity by
forwarding options directly to systemd-veritysetup.
See `veritysetup(8)` for more details.
Enable udev to set the transmit queue length of a device via a new directive to
be used in link files. The kernel stores this parameter as an unsigned 32 bit
integer. As typical values currently range in the order of 10 to a few 10,000
packets reduce the domain of valid values for this directive to 0..4294967294
and take the excluded 4294967295 == UINT32_MAX to indicate that the directive
is unset.
The next libblkid v2.37 is going to support session offsets for
multi-session CD/DVDs. This feature is implemented by "hint offsets".
These offsets are optional and prober specific (e.g., iso, udf, ...).
For this purpose, the library provides a new function
blkid_probe_set_hint(), and blkid(8) provides a new command-line
option --hint <name>=<offset>. For CD/DVD, the offset name is
"session_offset".
The difference between classic --offset and the new --hint is that
--offset is very restrictive and defines the probing area and the rest
of the device is invisible to the library. The new --hint works
like a suggestion, it provides a hint where the user assumes the
filesystem, but the rest of the device is still readable for the
library (for example, to get some additional superblock information
etc.).
If the --hint is without a value then it defaults to zero.
The option --hint implementation in udev-builtin-blkid.c is backwardly
compatible. If compiled against old libblkid, then the option is used in
the same way as --offset.
Addresses: https://github.com/karelzak/util-linux/issues/1161
Addresses: https://github.com/systemd/systemd/pull/17424
Normally ls-files prints the full path to files from the repo root. But when
$GIT_WORK_TREE is set, ls-files prints paths relative to the current
directory. When rebasing, $GIT_WORK_TREE is set in the commands executed from
'rebase -x'. This causes problems if meson config is touched and the meson
reconfigures itself. ($GIT_WORK_TREE shouldn't be relevant, since the paths that
ls-files reports don't depend on the work tree, but whatever.) Let's unset
GIT_WORK_TREE to avoid the issue.
$ (cd test; git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
test/dmidecode-dumps/HP-Z600.bin
test/dmidecode-dumps/Lenovo-ThinkPad-X280.bin
test/dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
$ (cd test; GIT_WORK_TREE=$PWD/.. git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
dmidecode-dumps/HP-Z600.bin
dmidecode-dumps/Lenovo-ThinkPad-X280.bin
dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
Fixes#18148.
Enhance systemd-networkd to be able to control a CAN device's berr-reporting
flag via the new boolean directive BusErrorReporting= to be used in network
files.
By default the test suite prefers qemu, and uses nspawn only if
a test specifically says it doesn't support qemu.
Add a variable to allow flipping the default, and run as many
tests under nspawn as possible.
Allows to split the test run in two parts. Most tests can run under
nspawn which is much faster, and they can be ran in one chunk with
TEST_NO_QEMU=1. The qemu-only tests, which are just a handful, can
be ran in another chunk with TEST_QEMU_ONLY=1.
Allows autopkgtest to be split in two parts.
The image build function greps for ExecStart lines in unit files, but some
of them (eg: systemd-firstboot) do not use a full path.
It then falls back to 'type -P' but that only works if you have the binary
installed. For optional binaries like systemd-firstboot, the installation
can then fail.
Manually check if the binary already exists in /[usr/][s]bin.
Usually on Debian ROOTLIBDIR is /lib/<arch triplet>, which is not the right place.
Use pkg-config since we define it, and then fallback to /usr/lib/systemd/user which is
the canonical location.
On both Debian&friends and Fedora dbus/dbus-broker install the user socket/service
under /usr/lib/systemd/user, not /lib/systemd/systemd/user.
Previously, dns_answer_add() was O(n^2).
With this change dns_packet_extract() becomes ~15 times faster for some
extremal case.
Before:
```
$ time ./fuzz-dns-packet ~/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808
/home/watanabe/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808... ok
real 0m15.453s
user 0m15.430s
sys 0m0.007s
```
After:
```
$ time ./fuzz-dns-packet ~/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808
/home/watanabe/downloads/clusterfuzz-testcase-minimized-fuzz-dns-packet-5631106733047808... ok
real 0m0.831s
user 0m0.824s
sys 0m0.006s
```
Hopefully fixes oss-fuzz#19227.
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19227
Allow configuration for IPv6 discovered routes to be ignored instead of
adding them as a route. This can be used to block unwanted routes, for
example, you may wish to not receive some set of routes on an interface
if they are causing issues.
This allows them to be executed in parallel and also gives us
better reporting.
The dump files are renamed to avoid repeating "dmidecode-dump", since that
string is already present in the subdirectory name.
Add memory_id program to set properties about the physical memory
devices in the system. This is useful on machines with removable memory
modules to show how the machine can be upgraded, and on all devices to
detect the actual RAM size, without relying on the OS accessible amount.
Closes: #16651
I suspect the original version of the regex was written on a system,
which prints both the QEMU version and the QEMU package version in the
--version output, like Fedora:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 4.2.1 (qemu-4.2.1-1.fc32)
Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
However, Arch Linux prints only the QEMU version:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 5.2.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
This causes the awk regex to not match the version string, since there's
no whitespace after it, causing the version check to fail (as well as the
TEST-36-NUMAPOLICY) as well.
Follow-up for 43b49470d1.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
Fixes#17986.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Previous commits changed the dhcpv4 retransmission algorithm to be
slightly slower, changing the amount of time it takes to notify
systemd-networkd that the dhcpv4 configuration has (transiently)
failed from around 14 second up to 28 seconds.
Since the test_dhcp_client_with_ipv4ll_without_dhcp_server test
configures an interface to use dhcpv4 without any operating dhcpv4
server running, it must increase the amount of time it waits for
the test interface to reach degraded state.
The commit 6f3ac0d517 drops the prefix and
suffix in TAGS= property. But there exists several rules that have like
`TAGS=="*:tag:*"`. So, the property must be always prefixed and suffixed
with ":".
Fixes#17930.
As interfaces will be reconfigured asynchronously after `networkctl reload`.
So, right after `networkctl reload` is finished, interfaces may be still
in 'configured' state with the old .network files.
Fixes#17533
The memory pressure values of the units in TEST-56-OOMD seemed to be a
lot lower after updating to linux 5.9. This is likely due to a fix from
e22c6ed90a.
To account for this, I lowered memory.high on testbloat.service to
throttle it even more. This was enough to generate the 50%+ value to trigger
oomd for the test, but as an extra precaution I also lowered the oomd
threshold to 1% so it's certain to try and kill testbloat.service.
They are not really boolean, because we have both ipv4 and ipv6, but
for each protocol we have either unset, no, and yes.
From https://github.com/systemd/systemd/issues/13316#issuecomment-582906817:
LinkLocalAddressing must be a boolean option, at least for ipv4:
- LinkLocalAddressing=no => no LL at all.
- LinkLocalAddressing=yes + Static Address => invalid configuration, warn and
interpret as LinkLocalAddressing=no, no LL at all.
(we check that during parsing and reject)
- LinkLocalAddressing=yes + DHCP => LL process should be subordinated to the
DHCP one, an LL address must be acquired at start or after a short N
unsuccessful DHCP attemps, and must not stop DHCP to keeping trying. When a
DHCP address is acquired, drop the LL address. If the DHCP address is lost,
re-adquire a new LL address.
(next patch will move in this direction)
- LinkLocalAddressing=fallback has no reason to exist, because LL address must
always be allocated as a fallback option when using DHCP. Having both DHCP
and LL address at the same time is an RFC violation, so
LinkLocalAdressing=yes correctly implemented is already the "fallback"
behavior. The fallback option must be deprecated and if present in older
configs must be interpreted as LinkLocalAddressing=yes.
(removed)
- And for IPv6, the LinkLocalAddress option has any sense at all? IPv6-LL
address aren't required to be always set for every IPv6 enabled interface (in
this case, coexisting with static or dynamic address if any)? Shouldn't be
always =yes?
(good question)
This effectively reverts 29e81083bd. There is no
special "fallback" mode now, so the check doesn't make sense anymore.
The systemd-user file has been moved from /etc/pam.d into /usr/lib/pam.d,
so test-functions needs to copy it from /usr/lib/pam.d instead.
This will copy it from either location.
In Fedora rawhide various perl modules are now available as separate
packages that are not pulled in by dependencies. If we don't have some
package, skip the tests.
This ugly code is apparently the way to do conditional imports:
https://www.cs.ait.ac.th/~on/O/oreilly/perl/cookbook/ch12_03.htm.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
Closes#10355
Co-author: Anita Zhang <the.anitazha@gmail.com>
umount emits an error message "no mount point specified" if the
tmpfs isn't mounted yet, which is the normal case.
Suppress that by redirecting stderr.
Script for generating LOTS of SCSI disk and partition devices in
the fake sysfs we use for udev testing.
This script is supposed to be run after sys-script.py. It uses
code from sys-script.py as template to generate additional SCSI disk data
structures. Together with the "generator" code in udev-test.pl
added in the previous patch, it allows to run udev tests with almost
arbitrarily many devices, and thus to do performance scaling tests.
Manually listing all devices in the test definition becomes cumbersome with
lots of devices. Add a function that scans on all block devices in
the test sysfs and generates a list of devices to test.
Add 4 new tests using multiple devices. Number 2-4 use many
devices claiming the same symlink, where only one device has
a higher priority thatn the others. They fail sporadically with
the current code, if a race condition causes the symlink to point
to the wrong device. Test 4 is like test 2 with sleeps in between,
it's much less likely to fail.
the "last_rule" option hasn't been supported for some time.
Therefore this test fails if a "not_exp_links" attribute is added,
as it should be. Mark it appropriately.
Instead of testing the existence or non-exisitence of just a single
symlink, allow testing of several links per device.
Change the test definitions accordingly.
Test if symlinks are created correctly by comparing the symlink
targets to the devnode path. This implies (for the symlink) that
major/minor numbers and permissions are correct, as we have tested
that on the devnode already.
More often than not, the created devnode is the basename of the
sysfs entry. The "devnode" device may be used to override the
auto-detected node name.
Permissions and major/minor number are now verified on the devnode
itself, not on symlinks.
For those tests where exp_name is set to the computed devnode name,
the explicit "exp_name" can be removed. "exp_name" is only required for
symlinks.
This allows separate testing for devnodes and symlinks an a follow-up
patch.
Allow testing cases where multiple devices are added and removed
simultaneously. Tests are started as synchronously as possible using a
semaphore, in order to test possible race conditions. If this isn't desired,
the test parameter "sleep_us" can be set to the number of microseconds to wait
between udev invocations.
Allow testing cases where multiple devices are added and removed.
This implies a change of the data structure: every test allows
for multiple devices to be added, and "exp_name" etc. are now properties
of the device, not of the test.
The link state file is always removed when networkd is stopping. So,
the deserialization logic does not work. Moreover, the ADDRESSES=
entry is not used by sd-network, so serialization is also not necessary.
The test sometimes fails, e.g. in bionic-s390x ci. I think it might be because
the service binary exits before we get a chance to notice that it is running:
13:59:31 --- Listing only the last 100 lines from a long log. ---
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4639845)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4539608)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4439376)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4338946)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4238702)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4138424)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 4038116)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3937835)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3837553)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3737250)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3636934)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3536622)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3436318)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3336021)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3235730)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3135468)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 3035158)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2934855)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2834541)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2732511)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2632255)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2532014)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2431746)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2331438)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2231213)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2130952)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 2030663)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1930428)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1830172)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1729906)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1629652)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1529368)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1429110)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1328852)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1228593)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1128320)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 1028083)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 927824)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 827564)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 724935)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 624664)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 524411)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 424124)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 323853)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 223585)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 120356)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: 18053)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 line 293: path-unit.path: state = running; result = success (left: -82385)
13:59:31 line 293: path-mycustomunit.service: state = exited; result = success
13:59:31 Test timeout when testing path-unit.path
It seems test/test-path/path-service.service wasn't actually used for anything.