IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On Ubuntu 17.04 (zesty zapus) netcat-openbsd was upgraded from 1.105-7ubuntu1
to 1.130-3, at the same time the defaults got changed from -q0 to -q-1
(infinity) the net result is that `echo A | nc -U' call now hangs, preventing
the testcase to complete. One could use the old default of -q0, but that option
is not available in some netcat implementations. Thus settle to specify -w1
instead to mitigate the testcase hang.
manager_sync_bus_names() function retrieves the dbus names
and compares it with unit bus names. It could be right
after the list is retrieved, the dbus peer is disconnected.
In this case it is really not an ERROR print if
sd_bus_get_name_creds() or sd_bus_creds_get_unique_name()
fail.
At present, devices implementing the BTN_DPAD_UP/DOWN/LEFT/RIGHT
codes will be incorrectly classified as key devices. This causes
devices respecting the Linux gamepad spec (such as the DS3 as of
kernel 4.12) to be classified as keyboards by X11.
This is caused by the test_key function checking all codes on
[KEY_OK, BTN_TRIGGER_HAPPY). Unfortunately the BTN_DPAD_* codes
are placed between KEY_LIGHTS_TOGGLE and KEY_ALS_TOGGLE. This
patch splits the upper key block check into the block before and
after the BTN_DPAD_* codes. An array is used to avoid dedicated,
per block loops in the event that more event codes are added in
the future.
When using pkg-config to determine the include flags for blkid the
flags are returned as:
$ pkg-config blkid --cflags
-I/usr/include/blkid -I/usr/include/uuid
We use the <blkid/blkid.h> include which would be correct when using
the default compiler /usr/include header search path. However, when
cross-compiling the blkid.h will not be installed at /usr/include and
highly likely in a temporary system root. It is futher compounded if
the cross-compile packages are split up and the blkid package is not
available in the same sysroot as the compiler.
Regardless of the compilation setup, the correct include path should be
<blkid.h> if using the pkg-config returned CFLAGS.
Due to ARM not having an EFI capable objcopy we need to use the binary
output argument. This is correctly set up for AArch64 but is missed
when building for ARM32. This patch adds the ARCH_ARM automake define
which can then be used in the makefile to determine if to use the
correct linker flags.
The addition of the ARM32 flags is a copy and paste from the AArch64 to
create a logical OR for the ARCH_AARCH64 and ARCH_ARM variables. I
couldn't figure out a better way to create the conditional with basic
Make language constructs.
When the user provides the --with-efi-includedir we incorrectly search
for the header at /usr/include not the provided location. This patch
changes the check to use the provided value so that non-standard header
locations are supported.
This situation occurs commonly when cross-compiling systemd because the
GNU EFI headers and library will not be installed into the root
locations but highly likely a temporary system root.
This makes it easier to use the same generator script as for other
gperf scripts. With automake each gperf file had it's own rule, but
with meson I'm trying to use one script, and this inconsistency made
that harder.
We defined both $(VERSION) and $(PACKAGE_VERSION) with the same contents.
$(PACKAGE_VERSION) is slightly more descriptive, so settle on that, and
drop the other define.
We used ENABLE_LOGIND for the automake conditional, and HAVE_LOGIND
for the ifdef. That wasn't wrong, but it certainly was confusing.
Also, move the ifdeffery to avoid warning about unused static function
logind_set_wall_message() when logind is disabled.
busctl is not part of libsystemd, and should not be stored under libsystemd.
In particular this is confusing because busctl is linked with libshared, but
stuff in libsystemd is not supposed to depend on libshared.
iio-sensor-proxy expects the accelerometer oriented as follows:
positive x - to the right, positive y - up (opposite to gravity).
The hardware in the Asus TP300LJ-DW049H is however oriented
differently:
positive x - down, positive y - to the left
This commit adds a ACCEL_MOUNT_MATRIX quirk for this
particular laptop model.
If a conflict occurs on a claimed ipv4ll address, the device releases
the address and then does not attempt to acquire a new ipv4ll
address. According to RFC3927, releasing the address in this
situation is correct. However, this should be followed by an attempt
to configure a new ipv4ll address.
This commit restarts the ipv4ll address acquisition state machine
after releasing the conflicting address.
From RFC3927 Section 2.5 conflict defense method (b):
...
However, if this is not the first conflicting ARP packet the host has
seen, and the time recorded for the previous conflicting ARP packet is
recent, within DEFEND_INTERVAL seconds, then the host MUST immediately
cease using this address and configure a new IPv4 Link-Local address
as described above.
...
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
After an ipv4ll claimed address conflict occurs a new address needs
to be chosen and then the acquisition state machine needs to be
restarted.
This commit adds a function (sd_ipv4ll_restart) that clears the
previously acquired address (ll->address) and then calls the existing
sd_ipv4ll_start function to choose the new address and start the
acquisition.
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
For IBM PowerVM Virtual I/O network devices, we can build predictable names
based on the slot number passed as part of the OF "reg" property. Valid slot
numbers range between 2-32767, so we only need the bottom half of the unit
address passed.
For example:
/proc/device-tree/vdevice/l-lan@30000002
/proc/device-tree/vdevice/vnic@30000005
would initially map to something like:
/sys/devices/vio/30000002/net/eth0
/sys/devices/vio/30000005/net/eth1
and would then translate to env2 and env5
This patch ignores the bus number, as there should only ever be one bus, and
then remove leading zeros.
The commit c7fb922d62 prohibits
journal-upload to save its state in /var/lib/systemd/journal-upload/state,
thus the daemon fails and outputs the following error message even if
the directory is not read-only file system
```Cannot save state to /var/lib/systemd/journal-upload/state: Read-only file system```
This commit adds the permission the daemon to write the state file.
Native journal messages (_TRANSPORT=journal) typically don't have a
syslog facility attached to it. As a result when forwarding the messages
to syslog they ended up with facility 0 (LOG_KERN).
Apply syslog_fixup_facility() so we use LOG_USER instead.
Fixes: #5640
So far, all sections of the systemd.special(7) man page used
<varlistentry> for listing the targets, with one exception: the
"Special Passive User Units" one. Let's clean this up and use the same
formatting everywhere.
Creating quota on an iscsi device is causing dependency loops at next reboot.
Reason is that systemd-quotacheck and quotaon.service are ordered before
local-fs.target and quota enabled mounts have a before dependency to them.
This cannot work for _netdev mounts, because network activation is ordered
after local-fs.target.
Moving the Before dependency for systemd-quotacheck and quotaon.service
to remote-fs.target fixes this.
network.target should be pulled in to the transaction
by the unit that provides network services, but currently
for initscripts it only pulls in network-online.target.
Commit 5ed020d8d1 already fixed this issue for
getty@.service but forgot serial console.
Note that this is not needed for emergency target as the sysinit target
conflicts against this target already.
In 58a6dd1558 s-n-wait-online.service was added
to presets to synchronize the presets with the state after installation. But it
is harmful to have s-n-wait-online.service enabled when s-n.service is
disabled, because s-n-wait-online.service has Requsite=s-n.service and cannot
be activated. Thus remove s-n-wait-online.service from presets again, and let
it be enabled whenever s-n.service is enabled.
During installation we create enablement symlinks by hand, and since s-n.service
is enabled, s-n-w-o.service should be enabled too, so the symlink should still
be created during installation.
https://bugzilla.redhat.com/show_bug.cgi?id=1433459#c15
Kernel default mode is 0600, but distributions change it to group kvm, mode
either 0660 (e.g. Debian) or 0666 (e.g. Fedora). Both approaches have valid
reasons (a stricter mode limits exposure to bugs in the kvm subsystem, a looser
mode makes libvirt and other virtualization mechanisms work out of the box for
unprivileged users over ssh).
In Fedora the qemu package carries the relevant rule, but it's nicer to have it
in systemd, so that the permissions are not dependent on the qemu package being
installed. Use of packaged qemu binaries is not required to make use of
/dev/kvm, e.g. it's possible to use a self-compiled qemu or some alternative.
https://bugzilla.redhat.com/show_bug.cgi?id=1431876
To accomodate both approaches, add a rule to set the mode in 50-udev-default.rules,
but allow the mode to be overridden with a --with-dev-kvm-mode configure rule.
The default is 0660, as the (slightly) more secure option.
