IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The setting is hardly useful (since its effect is generally reduced to zero due
to file system caps), and with the advent of ambient caps an actually useful
replacement exists, hence let's get rid of this.
I am pretty sure this was unused and our man page already recommended against
its use, hence this should be a safe thing to remove.
As kdbus won't land in the anticipated way, the bus-proxy is not needed in
its current form. It can be resurrected at any time thanks to the history,
but for now, let's remove it from the sources. If we'll have a similar tool
in the future, it will look quite differently anyway.
Note that stdio-bridge is still available. It was restored from a version
prior to f252ff17, and refactored to make use of the current APIs.
The "is-enabled" command doesn't care whether the symlinks are declared in the
[Install] section of a unit file or not, when returning "enabled". Any alias,
.wants/ or .requires/ symlinks suffice.
Fixes: #975
Support for net_cls.class_id through the NetClass= configuration directive
has been added in v227 in preparation for a per-unit packet filter mechanism.
However, it turns out the kernel people have decided to deprecate the net_cls
and net_prio controllers in v2. Tejun provides a comprehensive justification
for this in his commit, which has landed during the merge window for kernel
v4.5:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bd1060a1d671
As we're aiming for full support for the v2 cgroup hierarchy, we can no
longer support this feature. Userspace tool such as nftables are moving over
to setting rules that are specific to the full cgroup path of a task, which
obsoletes these controllers anyway.
This commit removes support for tweaking details in the net_cls controller,
but keeps the NetClass= directive around for legacy compatibility reasons.
Previously, using --accept would enable inetd-style socket activation in addition to per-connection operation. This is
now split into two switches: --accept only switches between per-connection or single-instance operation. --inetd
switches between inetd-style or new-style fd passing.
This breaks the interface of the tool, but given that it is a debugging tool shipped in /usr/lib/systemd/ it's not
really a public interface.
This change allows testing new-style per-connection daemons.
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
This makes sure we never run two control processes at the same time, we cannot keep track off.
This introduces a slight change of behaviour but cleans up the definition of ExecStop= and ExecStopPost=. The former is
now invoked only if the service managed to start-up correctly. The latter is called even if start-up failed half-way.
Thus, ExecStopPost= may be used as clean-up step for both successful and failed start-up attempts, but ExecStop='s
purpose is clearly defined as being responsible for shutting down the service and nothing else.
The precise behaviour of this was not documented yet. This commit adds the necessary docs.
Fixes: #1254
This adds a new switch --as-pid2, which allows running commands as PID 2, while a stub init process is run as PID 1.
This is useful in order to run arbitrary commands in a container, as PID1's semantics are different from all other
processes regarding reaping of unknown children or signal handling.
This adds two new calls to get the list of all journal fields names currently in use.
This is the low-level support to implement the feature requested in #2176 in a more optimized way.
This should simplify handling of time events in clients and is in-line with the USEC_INFINITY macro we already have.
This way setting a timeout to 0 indicates "elapse immediately", and a timeout of USEC_INFINITY "elapse never".
Also introduce sd_journal_has_runtime_files() and
sd_journal_has_persistent_files() to the public API. These functions
can be used to easily find out if the open journal files are runtime
and/or persistent.
But also keep the old name as (undocumented) compatibility around.
The reload-or-try-restart was documented to be a NOP if the unit is not running, since the previous commits this is
also implemented. The old name suggests that the "try" logic only applies to restarting. Fix this, by moving the "try-"
to the front, to indicate that the whole option is a NOP if the service isn't running.
This changes the UseDomains= setting of .network files to take an optional third value "route", in addition to the
boolean values. If set, the passed domain information is used for routing rules only, but not for the search path
logic.
Previously, .network files only knew a vaguely defined "Domains=" concept, for which the documentation declared it was
the "DNS domain" for the network connection, without specifying what that means.
With this the Domains setting is reworked, so that there are now "routing" domains and "search" domains. The former are
to be used by resolved to route DNS request to specific network interfaces, the latter is to be used for searching
single-label hostnames with (in addition to being used for routing). Both settings are configured in the "Domains="
setting. Normal domain names listed in it are now considered search domains (for compatibility with existing setups),
while those prefixed with "~" are considered routing domains only. To route all lookups to a specific interface the
routing domain "." may be used, referring to the root domain. An alternative syntax for this is the "*", as was already
implemented before using the "wildcard" domain concept.
This commit adds proper parsers for this new logic, and exposes this via the sd-network API. This information is not
used by resolved yet, this will be added in a later commit.
We have 126 broken links to sd-bus.html, it's nice to fix that.
Current version is mostly a stub, with a long list of links to other
pages. I think that's fine, especially that sd-bus might evolve
quite a bit before it is made public.
Not all of linked pages are written. Still missing:
sd_bus_can_send
sd_bus_get_name_creds
sd_bus_get_owner_creds
sd_bus_message_can_send
sd_bus_message_get_creds
sd_bus_message_set_allow_interactive_authorization
sd_bus_send
sd_bus_set_address
sd_bus_set_description
sd_bus_start
sd_event_set_prepare
sd-device
systemd.busname
... to determine if color output should be enabled. If the variable is not set,
fall back to using on_tty(). Also, rewrite existing code to use
colors_enabled() where appropriate.
- remove things which are clear from the context
- 0 is a valid descriptor number, hence "positive" → "non-negative"
- "positive" means greater than zero, hence "positive non-zero" → "positive"
- use oxford comma
- reword some things for clarity
This patch add support to configure port
PortRange:
VXLAN bases source UDP port based on flow to help the
receiver to be able to load balance based on outer header flow.
DestinatinPort:
Allow configuring the default destination port on a per-device basis.
sd_event_now() is a public function, so we must check all
arguments for validity. Update man page and add tests.
Sample debug message:
Assertion 'IN_SET(clock, CLOCK_REALTIME, CLOCK_REALTIME_ALARM, CLOCK_MONOTONIC, CLOCK_BOOTTIME, CLOCK_BOOTTIME_ALARM)' failed at src/libsystemd/sd-event/sd-event.c:2719, function sd_event_now(). Ignoring.
Allow for overriding all other machine-ids which may be present on
the system using a kernel command line systemd.machine_id or
--machine-id= option.
This is especially useful for network booted systems where the
machine-id needs to be static, or for containers where a specific
machine-id is wanted.
Let's increase compatibility with many private domains by default, and
ship a default NTA list of wel-known private domains, where it is
unlikely they will be deployed as official TLD anytime soon.
This adds logic to detect cases like the Fritz!Box routers which serve
a private DNS domain "fritz.box" under the TLD "box" that does not
exist in the root servers. If this is detected DNSSEC validation is
turned off for this private domain, thus improving compatibility with
such private DNS zones.
This should be fairly secure as we first rely on the proof that .box
does not exist before this logic is applied. Nevertheless the logic is
only enabled for DNSSEC=allow-downgrade mode.
This logic does not work for routers that set up a full DNS zone directly
under a non-existing TLD, as in that case we cannot prove
that the domain is truly non-existing according to the root servers.
While journal received remotely can be sealed, it can only be done
on the command line using --seal, so for consistency, we will
also permit to set it in the configuration file.
The current code is not compatible with current dkr protocols anyway,
and dkr has a different focus ("microservices") than nspawn anyway
("whole machine containers"), hence drop support for it, we cannot
reasonably keep this up to date, and it creates the impression we'd
actually care for the microservices usecase.
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
The name RandomSec is too generic: "Sec" just specifies the default
unit type, and "Random" by itself is not enough. Rename to something
that should give the user general idea what the setting does without
looking at documentation.
With this change, we add a new object to resolved, "DnsSearchDomain="
which wraps a search domain. This is then used to introduce a global
search domain list, in addition to the existing per-link search domain
list which is reword to make use of this new object too.
This is preparation for implement proper unicast DNS search domain
support.
/etc/resolv.conf is only read when the DNS= setting does not appear at
all in resolved.conf, regardless if set to the empty list or anything
else. Correct that in the man page.
The new parser supports:
<value> - specify both limits to the same value
<soft:hard> - specify both limits
the size or time specific suffixes are supported, for example
LimitRTTIME=1sec
LimitAS=4G:16G
The patch introduces parse_rlimit_range() and rlim type (size, sec,
usec, etc.) specific parsers. No code is duplicated now.
The patch also sync docs for DefaultLimitXXX= and LimitXXX=.
References: https://github.com/systemd/systemd/issues/1769
Links like http://www.freedesktop.org/software/systemd/man/systemd.socket.html
are changed to http://www.freedesktop.org/software/systemd/man/systemd.socket.html#Accept=.
This implementation is quick & dirty, and misses various corner
cases. A fairly important one is that when a few directives share the
same anchor (which happens when multiple directives are described in
the same paragraph), generated links for everything except the first
one link to an invalid anchor. Another shortcoming is that the
formatting does not use the proper generateID machinery, so the anchor
name could be wrong in some cases. But it seems to work for a large
percentage of links, so seems to be an improvement in usability. When
the anchor is missing, we land at the top of the page, which is the
same as before. If the anchor were to point to different spot, this
would be more confusing... Not sure if that ever happens. Anyway, the
user should be able to recover from landing on the wrong place in the
page.
(Mostly) fixes https://github.com/systemd/systemd/issues/1956.
'set-property' has been primarly designed to change some properties of
*active* units.
However it can easily work on inactive units as well. In that case
changes are only saved in a drop-in for futur uses and changes will be
effective when unit will be started.
Actually it already works on inactive units but that was not
documented and not fully supported. Indeed the inactive units had to
be known by the manager otherwise it was reported as not loaded:
$ systemctl status my-test.service
* my-test.service - My Testing Unit
Loaded: loaded (/etc/systemd/system/my-test.service; static; vendor preset: disabled)
Drop-In: /etc/systemd/system/my-test.service.d
Active: inactive (dead)
$ systemctl set-property my-test.service MemoryLimit=1000000
Failed to set unit properties on my-test.service: Unit my-test.service is not loaded.
[ Note: that the unit load state reported by the 'status' command
might be confusing since it claimed the unit as loaded but
'set-property' reported the contrary. ]
One can possibily workaround this by making the unit a dependency of
another active unit so the manager will keep it around:
$ systemctl add-wants multi-user.target my-test.service
Created symlink from /etc/systemd/system/multi-user.target.wants/my-test.service to /etc/systemd/system/my-test.service.
$ systemctl set-property my-test.service MemoryLimit=1000000
$ systemctl status my-test.service
* my-test.service - My Testing Unit
Loaded: loaded (/etc/systemd/system/my-test.service; enabled; vendor preset: disabled)
Drop-In: /etc/systemd/system/my-test.service.d
`-50-MemoryLimit.conf
Active: inactive (dead)
This patch simply forces 'SetUnitProperties()' to load the unit if
it's not already the case.
It also documents the fact that 'set-property' can be used on inactive
units.
This completes the set of man pages for sd-event and contains some minor
other fixes for other man pages too.
The sd_event_set_name(3) man page is renamed to
sd_event_source_set_description(3), which is the correct name of the
concept today.
Now we don't support the socket protocol like
sctp and udplite .
This patch add a new config param
SocketProtocol: udplite/sctp
With this now we can configure the protocol as
udplite = IPPROTO_UDPLITE
sctp = IPPROTO_SCTP
Tested with nspawn:
journald: turn ForwardToSyslog= off by default
After all, rsyslog and friends nowadays read their data directly from
the journal, hence the forwarding is unnecessary in most cases.
see 46b131574f
Previously, after a timer unit elapsed we'd leave it around for good,
which has the nice benefit that starting a timer that shall trigger at a
specific point in time multiple times will only result in one trigger
instead of possibly many. With this change a new option
RemainAfterElapse= is added. It defaults to "true", to mimic the old
behaviour. If set to "false" timer units will be unloaded after they
elapsed. This is specifically useful for transient timer units.
It's not a good idea to create subvolumes for parts of the OS tree (such
as /home, or /var) if the root directory is not a subvolume too. We
shouldn't assume control of "heavier" objects such as subvolumes, if the
originating object (the root directory) is a "light-weight" object, i.e.
a plain directory.
Effectively this means that chroot() environments that are run on a
plain directory do not have to deal with problems around systemd
creating subvolumes that cannot be removed with a simple "rm" anymore.
However, if the chroot manager creates a proper subvolume for such an
environment it will also get further subvolumes placed in there, under
the assumption that the manager understands the concept of subvolumes in
that case.
This new setting configures the TasksMax= field for the slice objects we
create for each user.
This alters logind to create the slice unit as transient unit explicitly
instead of relying on implicit generation of slice units by simply
starting them. This also enables us to set a friendly description for
slice units that way.
nginx defines an uppercase "M" that way (in contrast to the lowercase
"m" for "minute"), and it sounds like an OK logic to follow, so that we
understand a true superset of time values nginx understands.
http://nginx.org/en/docs/syntax.html
As it turns out the kernel does not support per-interface IPv6 packet
forwarding controls (unlike as it does for IPv4), but only supports a
global option (#1597). Also, the current per-interface management of the
setting isn't really useful, as you want it to propagate to at least one
more interface than the one you configure it on. This created much grief
(#1411, #1808).
Hence, let's roll this logic back and simplify this again, so that we
can expose the same behaviour on IPv4 and IPv6 and things start to work
automatically again for most folks: if a network with this setting set
is set up we propagate the setting into the global setting, but this is
strictly one-way: we never reset it again, and we do nothing for network
interfaces where this setting is not enabled.
Fixes: #1808, #1597.