IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Check if the parsed seconds value fits in an integer *after*
multiplying by USEC_PER_SEC, otherwise a large value can trigger
modulo by zero during normalization.
- linux does not accept prefixes for SLAAC unequal to 64 bits: http://lxr.free-electrons.com/source/net/ipv6/addrconf.c#L2741
- when networkd tries export such a route to the kernel it will get -EINVAL and
set the whole device into a failed state.
- this patch will make networkd ignore such prefixes for SLAAC,
but process other informations which may contain other prefixes.
- Note that rfc4862 does not forbid prefix length != 64 bit
Core was generated by `systemctl cat test@.target test@.service'.
Program terminated with signal SIGSEGV, Segmentation fault.
32 movdqu (%rdi), %xmm0
(gdb) bt
-0 strrchr () at ../sysdeps/x86_64/strrchr.S:32
-1 0x00007f57fdf837fe in __GI___basename (filename=0x0) at basename.c:24
-2 0x000055b8a77d0d91 in unit_find_paths (bus=0x55b8a9242f90, unit_name=0x55b8a92428f0 "test@.service", lp=0x7ffdc9070400, fragment_path=0x7ffdc90703e0, dropin_paths=0x7ffdc90703e8) at src/systemctl/systemctl.c:2584
-3 0x000055b8a77dbae5 in cat (argc=3, argv=0x7ffdc9070678, userdata=0x0) at src/systemctl/systemctl.c:5324
-4 0x00007f57fe55fc6b in dispatch_verb (argc=5, argv=0x7ffdc9070668, verbs=0x55b8a77f1c60 <verbs>, userdata=0x0) at src/basic/verbs.c:92
-5 0x000055b8a77e477f in systemctl_main (argc=5, argv=0x7ffdc9070668) at src/systemctl/systemctl.c:8141
-6 0x000055b8a77e5572 in main (argc=5, argv=0x7ffdc9070668) at src/systemctl/systemctl.c:8412
The right behaviour is not easy in this case. Implement some "sensible" logic.
Fixes#4912.
At least bird's implementation of router advertisement does not
set MTU option by default (instead it supplies an option to the user).
In this case just leave MTU as it is.
We currently don't expect any warnings about format strings, on any
architecture (#4612 removed the last few warnings). Turn those warnings into
errors in the future.
As requested by Martin Pitt.
gcc documentation says that -Wformat=2 includes -Wformat-security and
-Wformat-nonliteral so don't include them explicitly.
That message is emitted by every systemd instance on every resume:
Dec 06 08:03:38 laptop systemd[1]: Time has been changed
Dec 06 08:03:38 laptop systemd[823]: Time has been changed
Dec 06 08:03:38 laptop systemd[916]: Time has been changed
Dec 07 08:00:32 laptop systemd[1]: Time has been changed
Dec 07 08:00:32 laptop systemd[823]: Time has been changed
Dec 07 08:00:32 laptop systemd[916]: Time has been changed
-- Reboot --
Dec 07 08:02:46 laptop systemd[836]: Time has been changed
Dec 07 08:02:46 laptop systemd[1]: Time has been changed
Dec 07 08:02:46 laptop systemd[926]: Time has been changed
Dec 07 19:48:12 laptop systemd[1]: Time has been changed
Dec 07 19:48:12 laptop systemd[836]: Time has been changed
Dec 07 19:48:12 laptop systemd[926]: Time has been changed
...
Fixes#4896.
Even if pressing Ctrl-c after spawning gdb with "coredumpctl gdb" is not really
useful, we should let gdb handle the signal entirely otherwise the user can be
suprised to see a different behavior when gdb is started by coredumpctl vs when
it's started directly.
Indeed in the former case, gdb exits due to coredumpctl being killed by the
signal.
So this patch makes coredumpctl ignore SIGINT as long as gdb is running.
We should also mention this in NEWS before release. Suggested text:
> DBus policy files are now installed into /usr rather than /etc. Make sure
> your system has dbus = 1.9.18 running before upgrading to this version, or
> override the install path with --with-dbuspolicydir=
Since commit 9d06297, mount units from mountinfo are not bound to their devices
anymore (they use the "Requires" dependency instead).
This has the following drawback: if a media is mounted and the eject button is
pressed then the media is unconditionally ejected leaving some inconsistent
states.
Since udev is the component that is reacting (no matter if the device is used
or not) to the eject button, users expect that udev at least try to unmount the
media properly.
This patch introduces a new property "SYSTEMD_MOUNT_DEVICE_BOUND". When set on
a block device, all units that requires this device will see their "Requires"
dependency upgraded to a "BindTo" one. This is currently only used by cdrom
devices.
This patch also gives the possibility to the user to restore the previous
behavior that is bind a mount unit to a device. This is achieved by passing the
"x-systemd.device-bound" option to mount(8). Please note that currently this is
not working because libmount treats the x-* options has comments therefore
they're not available in utab for later application retrievals.
socket_find_symlink_target() returns a pointer to
p->address.sockaddr.un.sun_path when the first byte is non-zero without
checking that this is AF_UNIX socket. Since sockaddr is a union this
byte could be non-zero for AF_INET sockets.
Existing callers happen to be safe but is an accident waiting to happen.
Use socket_address_get_path() since it checks for AF_UNIX.
We have a system which has the HDMI audio capability internally,
but pulseaudio is not giving it a very high priority compared
to e.g. USB sound cards.
The sound device appears on the platform bus and it is not
currently tagged with any form factor information.
It seems safe to assume that any sound card that is directly on the
platform bus is of internal form factor, but we must be careful because
udev rules will match all parent devices, not just the immediate parent,
and you will frequently encounter setups such as:
Platform bus -> USB host controller -> USB sound card
In that case, SUBSYSTEMS==platform would match even though we're
clearly working with an external USB sound card.
In order to detect true platform devices here, we rely on the observation
that if any parent devices of the sound card are PCI, USB or firewire
devices, then this sound card cannot directly connected to the platform
bus. Otherwise, if we find a parent device on the platform bus, we assume
this is an internal sound card connected directly to the platform bus.
Let's start placing our D-Bus policy files in /usr rather than /etc. D-Bus
supports this since 1.9.18, and moving our files over means we continue to work
even if /etc is flushed out entirely (for example if systemd-nspawn's
--volatile= switch is used).
Since 1.9.18 was released summer 2015 it should be fine to require a newer
version like this for our builds.
https://lists.freedesktop.org/archives/dbus/2015-July/016746.html
udev-test.pl shells out systemd-detect-virt, and it really should invoke the
version from the build tree instead of one supplied by the installed system,
hence let's add the builddir to $PATH while building.
PR_SET_MM_ARG_START allows us to relatively cleanly implement process renaming.
However, it's only available with privileges. Hence, let's try to make use of
it, and if we can't fall back to the traditional way of overriding argv[0].
This removes size restrictions on the process name shown in argv[] at least for
privileged processes.
We used the wrong return value in one case, so that our translations were
thrown away.
While we are at it, make sure to always initialize *ret on successful function
exits.
Fixes: #4762
The container detection code in virt.c we ship checks for /proc/1/environ,
looking for "container=" in it. Let's make sure our "-a" init stub exposes that
correctly.
Without this "systemd-detect-virt" run in a "-a" container won't detect that it
is being run in a container.
