IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
UINTN is the integer type equalling the native ptr size. Let's fix the
casting warnings described in #7788 by casting the the pointers and
values to this type first. That way we cast integers to the right size
first before turning them into pointers, and pointers are first
covnerted to integers of the right size before converting them into
integers.
Not tested, since I lack i386 EFI systems, but I think this is simple
enough to be correct event without testing.
Fixes: #7788
Systemctl is special because it is required for many tasks that may need to
be performed when the system is not fully configured and/or partially
broken:
1. Installing/Uninstalling services during OS installs and upgrades
2. Shutting down the system
Therefore reduce the number of dependencies that systemctl pulls in, by
not linking to systemd-shared. This brings a bit of resilience to
systemctl (and its aliases shutdown, reboot, etc), by linking against
less external libraries.
Because this extra resilience comes at a cost of approximately 580 KB
extra space, this is done behind a meson build option.
Also remove the comma from the comment everywhere, I think the comma
unnecessarilly put emphasis on the clause after the comma.
Fixes#9090.
Reproducer:
systemd-journal-remote --split-mode=none -o /tmp/msg6.journal --trust=all --listen-http=8080
systemd-journal-upload -u http://localhost:8080
journalctl --file /tmp/msg6.journal -o verbose -n1
The boot id is stored twice, and different code paths use either one or the
other. So we need to store it both in the header and as a field for full
compatibility.
journalctl -o short would display those entries, but journalctl -o short-full
would refuse. If the entry is bad, just fall back to the receive-side realtime
timestamp like we would if it was completely missing.
The journal verification functions would reject such an entry. It would probably
still display fine (because we prefer _SOURCE_REALTIME_TIMESTAMP= if present), but
it seems wrong to create an entry that would not pass verification.
If the timestamp is above 9999-12-30, (or 2038-something-something on 32 bit),
use XXXX-XX-XX XX:XX:XX as the replacement.
The problem with refusing to print timestamps is that our code accepts such
timestamps, so we can't really just refuse to process them afterwards. Also, it
makes journal files non-portable, because suddently we might completely refuse
to print entries which are totally OK on a different machine.
This makes the fuzzing much more efficient. Optionally provide output is
$SYSTEMD_FUZZ_OUTPUT is set, which makes debugging of any failures much easier.
The case from 056129deb73df17ece4212db39d2ca0842d9a49c is still detected properly.
The parser never accepted "__"-prefixed fields in binary format, but there was
a comment questioning this decision. Let's make it official, and remove the
comment.
Also, for clarity, let's move the dunder field parsing after the field
verification check. This doesn't change much, because invalid fields cannot be
known special fields, but is seems cleaner to first verify the validity of the
name, and then check if it is one of the known ones.
$ build-asan/fuzz-journal-remote test/fuzz-regressions/fuzz-journal-remote/crash-96dee870ea66d03e89ac321eee28ea63a9b9aa45
...
Ignoring invalid field: "S\020"
Ignoring invalid field: "S\020"
...
If the field name includes nul bytes, we won't print all of the name.
But that seems enough of a corner case to ignore.
We'd look for a '=' separator using memchr, i.e. ignoring any nul bytes in the
string, but then do a strndup, which would terminate on any nul byte, and then
again do a memcmp, which would access memory past the chunk allocated by strndup.
Of course, we probably shouldn't allow keys with nul bytes in them. But we
currently do, so there might be journal files like that out there. So let's fix
the journal-reading code first.
`fuzz-journal-remote` seems to be failing under `msan` as soon as it starts:
$ sudo infra/helper.py run_fuzzer systemd fuzz-journal-remote
Running: docker run --rm -i --privileged -e FUZZING_ENGINE=libfuzzer -v /home/vagrant/oss-fuzz/build/out/systemd:/out -t gcr.io/oss-fuzz-base/base-runner run_fuzzer fuzz-journal-remote
Using seed corpus: fuzz-journal-remote_seed_corpus.zip
/out/fuzz-journal-remote -rss_limit_mb=2048 -timeout=25 /tmp/fuzz-journal-remote_corpus -max_len=65536 < /dev/null
INFO: Seed: 3380449479
INFO: Loaded 2 modules (36336 inline 8-bit counters): 36139 [0x7ff36ea31d39, 0x7ff36ea3aa64), 197 [0x9998c8, 0x99998d),
INFO: Loaded 2 PC tables (36336 PCs): 36139 [0x7ff36ea3aa68,0x7ff36eac7d18), 197 [0x999990,0x99a5e0),
INFO: 2 files found in /tmp/fuzz-journal-remote_corpus
INFO: seed corpus: files: 2 min: 4657b max: 7790b total: 12447b rss: 97Mb
Uninitialized bytes in __interceptor_pwrite64 at offset 24 inside [0x7fffdd4d7230, 240)
==15==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x7ff36e685e8a in journal_file_init_header /work/build/../../src/systemd/src/journal/journal-file.c:436:13
#1 0x7ff36e683a9d in journal_file_open /work/build/../../src/systemd/src/journal/journal-file.c:3333:21
#2 0x7ff36e68b8f6 in journal_file_open_reliably /work/build/../../src/systemd/src/journal/journal-file.c:3520:13
#3 0x4a3f35 in open_output /work/build/../../src/systemd/src/journal-remote/journal-remote.c:70:13
#4 0x4a34d0 in journal_remote_get_writer /work/build/../../src/systemd/src/journal-remote/journal-remote.c:136:21
#5 0x4a550f in get_source_for_fd /work/build/../../src/systemd/src/journal-remote/journal-remote.c:183:13
#6 0x4a46bd in journal_remote_add_source /work/build/../../src/systemd/src/journal-remote/journal-remote.c:235:13
#7 0x4a271c in LLVMFuzzerTestOneInput /work/build/../../src/systemd/src/fuzz/fuzz-journal-remote.c:36:9
#8 0x4f27cc in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /src/libfuzzer/FuzzerLoop.cpp:524:13
#9 0x4efa0b in fuzzer::Fuzzer::RunOne(unsigned char const*, unsigned long, bool, fuzzer::InputInfo*, bool*) /src/libfuzzer/FuzzerLoop.cpp:448:3
#10 0x4f8e96 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::__1::vector<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >, fuzzer::fuzzer_allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > > > const&) /src/libfuzzer/FuzzerLoop.cpp:732:7
#11 0x4f9f73 in fuzzer::Fuzzer::Loop(std::__1::vector<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >, fuzzer::fuzzer_allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > > > const&) /src/libfuzzer/FuzzerLoop.cpp:752:3
#12 0x4bf329 in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /src/libfuzzer/FuzzerDriver.cpp:756:6
#13 0x4ac391 in main /src/libfuzzer/FuzzerMain.cpp:20:10
#14 0x7ff36d14982f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#15 0x41f9d8 in _start (/out/fuzz-journal-remote+0x41f9d8)
Uninitialized value was stored to memory at
#0 0x7ff36e61cd41 in sd_id128_randomize /work/build/../../src/systemd/src/libsystemd/sd-id128/sd-id128.c:288:16
#1 0x7ff36e685cec in journal_file_init_header /work/build/../../src/systemd/src/journal/journal-file.c:426:13
#2 0x7ff36e683a9d in journal_file_open /work/build/../../src/systemd/src/journal/journal-file.c:3333:21
#3 0x7ff36e68b8f6 in journal_file_open_reliably /work/build/../../src/systemd/src/journal/journal-file.c:3520:13
#4 0x4a3f35 in open_output /work/build/../../src/systemd/src/journal-remote/journal-remote.c:70:13
#5 0x4a34d0 in journal_remote_get_writer /work/build/../../src/systemd/src/journal-remote/journal-remote.c:136:21
#6 0x4a550f in get_source_for_fd /work/build/../../src/systemd/src/journal-remote/journal-remote.c:183:13
#7 0x4a46bd in journal_remote_add_source /work/build/../../src/systemd/src/journal-remote/journal-remote.c:235:13
#8 0x4a271c in LLVMFuzzerTestOneInput /work/build/../../src/systemd/src/fuzz/fuzz-journal-remote.c:36:9
#9 0x4f27cc in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /src/libfuzzer/FuzzerLoop.cpp:524:13
#10 0x4efa0b in fuzzer::Fuzzer::RunOne(unsigned char const*, unsigned long, bool, fuzzer::InputInfo*, bool*) /src/libfuzzer/FuzzerLoop.cpp:448:3
#11 0x4f8e96 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::__1::vector<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >, fuzzer::fuzzer_allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > > > const&) /src/libfuzzer/FuzzerLoop.cpp:732:7
#12 0x4f9f73 in fuzzer::Fuzzer::Loop(std::__1::vector<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >, fuzzer::fuzzer_allocator<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > > > const&) /src/libfuzzer/FuzzerLoop.cpp:752:3
#13 0x4bf329 in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /src/libfuzzer/FuzzerDriver.cpp:756:6
#14 0x4ac391 in main /src/libfuzzer/FuzzerMain.cpp:20:10
#15 0x7ff36d14982f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
Uninitialized value was created by an allocation of 't' in the stack frame of function 'sd_id128_randomize'
#0 0x7ff36e61cb00 in sd_id128_randomize /work/build/../../src/systemd/src/libsystemd/sd-id128/sd-id128.c:274
SUMMARY: MemorySanitizer: use-of-uninitialized-value /work/build/../../src/systemd/src/journal/journal-file.c:436:13 in journal_file_init_header
Exiting
MS: 0 ; base unit: 0000000000000000000000000000000000000000
artifact_prefix='./'; Test unit written to ./crash-847911777b3096783f4ee70a69ab6d28380c810b
[vagrant@localhost oss-fuzz]$ sudo infra/helper.py check_build --sanitizer=memory systemd
Running: docker run --rm -i --privileged -e FUZZING_ENGINE=libfuzzer -e SANITIZER=memory -v /home/vagrant/oss-fuzz/build/out/systemd:/out -t gcr.io/oss-fuzz-base/base-runner test_all
INFO: performing bad build checks for /out/fuzz-dhcp-server.
INFO: performing bad build checks for /out/fuzz-journal-remote.
INFO: performing bad build checks for /out/fuzz-unit-file.
INFO: performing bad build checks for /out/fuzz-dns-packet.
4 fuzzers total, 0 seem to be broken (0%).
Check build passed.
It's a false positive which is most likely caused by
https://github.com/google/sanitizers/issues/852. I think it could be got around
by avoiding `getrandom` when the code is compiled with `msan`
We shouldn't just log arbitrary stuff, in particular newlines and control chars
Now:
Unknown dunder line __CURSORFACILITY=6\nSYSLOG_IDENTIFIER=/USR/SBIN/CRON\nMES…, ignoring.
Unknown dunder line __REALTIME_TIME[TAMP=1404101101501874\n__MONOTONIC_TIMEST…, ignoring.
It's not supposed to be the most efficient, but instead fast and simple to use.
I kept the logic in ellipsize_mem() to use unicode ellipsis even in non-unicode
locales. I'm not quite convinced things should be this way, especially that with
this patch it'd actually be simpler to always use "…" in unicode locale and "..."
otherwise, but Lennart wanted it this way for some reason.
To further avoid bufferbloat Explicit Congestion Notification (ECN)
should be enabled for both in and outgoing connections. The kernel
default is to enable it when requested for incoming connections, but
not to request it on outgoing connections. This patch enables it for
both.
A long time ago enabling these was causing problems, but these issues
have since been dealt with.
Fixes#9087.
This rewords the section, explicitly distuingishing the cases of clients
that only want a continious log stream (which can simply treat
SD_JOURNAL_INVALIDATE the same way as SD_JOURNAL_APPEND) and those which
want to represent on screen the full state of the log data on disk.
This is an alternative to a part of PR #9060, but keeps an explanation
of the destinction of handling depending on the type of client.
Fixes: #8963
Something is wrong with the entry (probably a missing timestamp), so no point
in rotating. But suppress the error in process_source(), so that the processing
of the data stream continues.
Also, just return 0 from writer_write() on success, the only caller doesn't
care.
The code to open journal files seems like the wrong place to enforce this. We
already check during boot and refuse to boot if machine-id is missing, no need
to enforce this here. In particular, it seems better to write logs from
journald even if they are not completely functional rather than refuse to
operate at all, and systemd-journal-remote also writes journal files and may
even be run on a system without systemd at all.
The docker image that oss-fuzz uses has an empty /etc/machine-id. Obviously
this is an error in the docker, but docker is fact of life, and it seems better
for systemd-journal-remote to work in such an incomplete environment.
We currently return -ENOMEDIUM when /etc/machine-id is empty, and -EINVAL when
it is all zeros. But -EINVAL is also used for invalid args. The distinction
between empty and all-zero is not very important, let's use the same return
code.
Also document -ENOENT and -ENOMEDIUM since they can be a bit surprising.
This is in preparation to reusing the RemoteServer in other concepts.
I tried to keep changes to minimum:
- arg_* global variables are now passed as state in RemoteServer
- exported functions get the "journal_remote_" prefix
- some variables are renamed
In particular, there is an ugly global RemoveServer* variable. It was originally
added because µhttpd did not allow state to be passed to the callbacks. I'm not
sure if this has been remediated in µhttpd, but either way, this is not changed
here, the global variable is only renamed for clarity.
