IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Kernel 5.8 gained a hidepid= implementation that is truly per procfs,
which allows us to mount a distinct once into every unit, with
individual hidepid= settings. Let's expose this via two new settings:
ProtectProc= (wrapping hidpid=) and ProcSubset= (wrapping subset=).
Replaces: #11670
The concept is flawed, and mostly useless. Let's finally remove it.
It has been deprecated since 90a2ec10f2 (6
years ago) and we started to warn since
55dadc5c57 (1.5 years ago).
Let's get rid of it altogether.
Add support for creating a MACVLAN interface in "source" mode by
specifying Mode=source in the [MACVLAN] section of a .netdev file.
A list of allowed MAC addresses for the corresponding MACVLAN can also
be specified with the SourceMACAddress= option of the [MACVLAN] section.
An example .netdev file:
[NetDev]
Name=macvlan0
Kind=macvlan
MACAddress=02:DE:AD:BE:EF:00
[MACVLAN]
Mode=source
SourceMACAddress=02:AB:AB:AB:AB:01 02:CD:CD:CD:CD:01
SourceMACAddress=02:EF:EF:EF:EF:01
The same keys can also be specified in [MACVTAP] for MACVTAP kinds of
interfaces, with the same semantics.
The fuzzer test case has a giant line with ";;;;;;;;;;;..." which is turned into
a strv of empty strings. Unfortunately, when pushing each string, strv_push() needs
to walk the whole array, which leads to quadratic behaviour. So let's use
greedy_allocation here and also keep location in the string to avoid iterating.
build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812 51.10s user 0.01s system 99% cpu 51.295 total
↓
build/fuzz-xdg-desktop test/fuzz/fuzz-xdg-desktop/oss-fuzz-22812 0.07s user 0.01s system 96% cpu 0.083 total
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=22812.
Other minor changes:
- say "was already defined" instead of "defined multiple times" to make it
clear that we're ignoring this second definition, and not all definitions
of the key
- unescaping needs to be done also for the last entry
SR-IOV provides the ability to partition a single physical PCI
resource into virtual PCI functions which can then be injected in
to a VM. In the case of network VFs, SR-IOV improves north-south n
etwork performance (that is, traffic with endpoints outside the
host machine) by allowing traffic to bypass the host machine’s network stack.
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.
This combines set_ensure_allocated() with set_consume(). The cool thing is that
because we know the hash ops, we can correctly free the item if appropriate.
Similarly to set_consume(), the goal is to simplify handling of the case where
the item needs to be freed on error and if already present in the set.
We'd try to map a zero-byte buffer from a NULL pointer, which is undefined behaviour.
src/systemd/src/libsystemd/sd-bus/bus-message.c:3161:60: runtime error: applying zero offset to null pointer
#0 0x7f6ff064e691 in find_part /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:3161:60
#1 0x7f6ff0640788 in message_peek_body /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:3283:16
#2 0x7f6ff064e8db in enter_struct_or_dict_entry /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:3967:21
#3 0x7f6ff06444ac in bus_message_enter_struct /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:4009:13
#4 0x7f6ff0641dde in sd_bus_message_enter_container /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-message.c:4136:21
#5 0x7f6ff0619874 in sd_bus_message_dump /work/build/../../src/systemd/src/libsystemd/sd-bus/bus-dump.c:178:29
#6 0x4293d9 in LLVMFuzzerTestOneInput /work/build/../../src/systemd/src/fuzz/fuzz-bus-message.c:39:9
#7 0x441986 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /src/libfuzzer/FuzzerLoop.cpp:558:15
#8 0x44121e in fuzzer::Fuzzer::RunOne(unsigned char const*, unsigned long, bool, fuzzer::InputInfo*, bool*) /src/libfuzzer/FuzzerLoop.cpp:470:3
#9 0x443164 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:770:7
#10 0x4434bc in fuzzer::Fuzzer::Loop(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:799:3
#11 0x42d2bc in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /src/libfuzzer/FuzzerDriver.cpp:846:6
#12 0x42978a in main /src/libfuzzer/FuzzerMain.cpp:19:10
#13 0x7f6fef13c82f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#14 0x407808 in _start (out/fuzz-bus-message+0x407808)
This is an attempt to clean up the POP3/SMTP/LPR/… DHCP lease server
data logic in networkd. This reduces code duplication and fixes a number
of bugs.
This removes any support for collecting POP3/SMPT/LPR servers acquired
via local DHCP client releases since noone uses that, and given how old
these protocols are I doubt this will change. It keeps support for
configuring them for the dhcp server however.
The differences between the DNS/NTP/SIP/POP3/SMTP/LPR configuration
logics are minimized.
This removes the relevant symbols from sd-network.h (which is an
internal API only at this point after all).
This is unfortunately not well test, given the old code for this had
barely any tests. But the new code should not perform worse at least,
and allow us to release, since it corrects some interfaces visible in
the .network configuration format.
Fixes: #15943
In DHCPv6-PD environment, where WAN interface requests IPv6 via DHCPv6,
receives the address as well as delegated prefixes, with LAN interfaces
serving those delegated prefixes in their router advertisement messages.
The LAN interfaces on the router themselves do not have
the IPv6 addresses assigned by networkd from the prefix it
serves on that interface. Now this patch enables it.
This allows users to configure a subnet id that should be used instead
of automatically (sequentially) assigned subnets. The previous attempt
had the downside that the subnet id would not be the same between
networkd restarts. In some setups it is desirable to have predictable
subnet ids across restarts of services and systems.
The code for the assignment had to be broken up into two pieces. One of
them is the old (sequential) assignment of prefixes and the other is the
new assignment based on configured subnet ids. The new assignment code
has to be executed first and has to be taken into account when (later
on) allocating the "old" subnets from the same pool.
Instead of having one iteration through the links we are now trying to
allocate a prefix for every link on every delegated prefix, unless they
received an assignment in a previous iteration.
Defines how link-local and autoconf addresses are generated.
0: generate address based on EUI64 (default)
1: do no generate a link-local address, use EUI64 for addresses generated
from autoconf
2: generate stable privacy addresses, using the secret from
stable_secret (RFC7217)
3: generate stable privacy addresses, using a random secret if unset
In the linked reproducer, m->fields_size == 0, and we calculate ri == -1, which
of course doesn't end well. Skip the whole calculation if m->fields_size == 0,
and also check that we don't go negative even if it is non-zero.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19446 and #15583.
Fixes: oss-fuzz#22208
```
test/fuzz/fuzz-calendarspec/oss-fuzz-22208... ../src/shared/calendarspec.c:666:48: runtime error: signed integer overflow: 2147000000 + 1000000 cannot be represented in type 'int'
#0 0x7f0b9f6cc56a in prepend_component ../src/shared/calendarspec.c:666
#1 0x7f0b9f6cd03a in parse_chain ../src/shared/calendarspec.c:718
#2 0x7f0b9f6cea1c in parse_calendar_time ../src/shared/calendarspec.c:845
#3 0x7f0b9f6d1397 in calendar_spec_from_string ../src/shared/calendarspec.c:1084
#4 0x401570 in LLVMFuzzerTestOneInput ../src/fuzz/fuzz-calendarspec.c:17
#5 0x401ae0 in main ../src/fuzz/fuzz-main.c:39
#6 0x7f0b9e31b1a2 in __libc_start_main (/lib64/libc.so.6+0x271a2)
#7 0x40122d in _start (/home/fsumsal/repos/systemd/build/fuzz-calendarspec+0x40122d)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../src/shared/calendarspec.c:666:48 in
```
Link groups are similar to port ranges found in managed switches.
You can add network interfaces to a numbered group and perform operations
on all the interfaces from that group at once.
Systems where a mount point is expected to be read-write needs a way to
fail mount units that fallback as read-only.
Add a property to allow setting the -w option when calling mount(8).
When specifying `DHCPv4.SendOption=`, it is used by systemd-networkd to
set the value of that option within the DHCP request that is sent out.
This differs to setting `DHCPServer.SendOption=`, which will place all
the options together as suboptions into the vendor-specific information
(code 43) option.
This commit adds two new config options, `DHCPv4.SendVendorOption=` and
`DHCPServer.SendVendorOption=`. These both have the behaviour of the old
`DHCPServer.SendOption=` flag, and set the value of the suboption in the
vendor-specific information option.
The behaviour of `DHCPServer.SendOption=` is then changed to reflect
that of `DHCPv4.SendOption=`. It will set the value of the corresponding
option in the DHCP request.
Proportional Integral controller-Enhanced (PIE) is a control
theoretic active queue management scheme. It is based on the
proportional integral controller but aims to control delay.
http://man7.org/linux/man-pages/man8/tc-pie.8.html
