IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This makes systemd-umount (or systemd-mount -u) supports multiple arguments
which can be path, device, or fstab style node name, like
`systemd-umount /path/to/umount /dev/sda1 UUID=xxxxxx-xxxx LABEL=xxxxx`.
C.f. https://github.com/systemd/systemd/pull/5235#issuecomment-277731314.
If wanted, the linker can be set with LDFLAGS (LDFLAGS=-Wl,-fuse-ld=gold meson ...),
and setting it internally was interfering with that. It seems that both gold and
bfd work very well and quick, and the reasons we had to prefer gold are not relevant
anymore.
Fixes#6169.
When the joystick is integrated directly into the machine, knowing
that the device is internal allows us to disable attached functionality
when the device is not used or inaccessible.
For example, this allows disabling rumble and accelerometer on
flip-console-like devices like the GPD-XD.
When specifiers are included in the Environment block in StartTransientUnit,
we resolve specifiers on the PID1 side. Nevertheless we store the unresolved
version in the transient unit file, so that it'll be resolved when loading
the unit. I think this looks nicer.
I also removed the writing of the merged Environment block to the transient
file. Afaict, this resulted in variables being written multiple times, but
this needs to be tested properly.
Fixes#5699.
This work allows to configure device port:
tp — An Ethernet interface using Twisted-Pair cable as the medium.
aui — Attachment Unit Interface (AUI). Normally used with hubs.
bnc — An Ethernet interface using BNC connectors and co-axial cable.
mii — An Ethernet interface using a Media Independent Interface (MII).
fibre — An Ethernet interface using Optical Fibre as the medium.
Apart from bugs (as in #6152), this can happen if we ever make
our requirements for environment entries more stringent. As with
the rest of deserialization, we should just warn and continue.
This changes loopback setup to not only start the loopback device but
also add the relevant IP addresses to it. This way, we can synchronously
wait until that's complete, and properly guarantee that loopback setup
is complete at the time we start our first processes.
This is a semi-revert of f3fc48150b, but
heavily updated.
Fixes: #5641
This code already existed in some form, however commented. Remove the
comments, as this was most likely simply a forgotten commenting for
debugging purposes.
This also extends the logic a bit, by sending SIGHUP right after the
SIGTERM, so that shells will also terminate, when PID 1 gets a
SIGRTMIN+3.
Fixes: #5711
Always install all tests if install-tests is set to true, as they might
be useful for CI. This includes manual and unsafe tests. Install those
in subdirectories of /usr/lib/systemd/tests.
Fixes#6163.
Device is gone and most likely it will get garbage collected. However in
cases when it doesn't get gc'ed (because it is referenced by some
other unit, e.g. mount from fstab) we need to unset sysfs. This is
because when device appears next time, possibly, with different sysfs
path we need to update the sysfs path. Current code could end up caching
stale sysfs path forever.
In reality this is not a problem for normal disks (unless you swap them
during system runtime). However this issue causes failures to mount
filesystems on LVM where sysfs path depends on activation
order (i.e. logical volumes from volume group that is activated first
get assigned lower dm-X numbers and corresponding syspaths).
Fixes#6126.
When a DBus name is released, NameOwnerChanged signal contains an empty string
as new_owner. Commit bbc2908 changed interpretation of the empty string to a
valid name, which is not consistent with values that are sent by dbus-daemon.
As a side effect, this masks symptoms of systemd-logind dbus disconnections
(#2925) by completely restarting it so it can freshly reconnect to dbus.
This reworks timer_enter_waiting() in a couple of ways in order to clean
it up a bit and fix#5629.
Most importantly, we previously we initialized ts_monotonic to either
the current time in CLOCK_MONOTONIC or in CLOCK_BOOTTIME, depending on
t->wake_system. Then given specific conditions we'd use this time as
base for our timers. And afterwards, if t->wake_system was on we'd
convetr the resulting value from CLOCK_MONOTONIC to CLOCK_BOOTTIME again
— which of course is wrong since we already were in CLOCK_BOOTTIME! This
fixes this logic, by using a triple timestamp so that we always have the
right base around, and initially only calculate in CLOCK_MONOTONIC and
only convert as last step.
Conversion between the clocks is now done with the generic
usec_shift_clock(), and additions via usec_add() making these
calculations a bit safer.
Fixes: #5629
For now, let's just special-case this in the sources. If more partition
types like this show up we should probably find some other solution.
Fixes: #5806
Recent systemd compiled in a build root which had libidn2-devel installed would
not run in the default installation root which had just libidn and did not have
libidn2. Since a8a2a0ed64 libidn2-devel (or equivalent) is installed in
the build root. Normally, since we install systemd in the installation root,
all dependencies that are needed for the compiled systemd to run are present,
but libidn2 is a new dependency, so the distro packages would just pull in
libidn, and not libidn2.
Temporily add libdn2 to explicitly specified Packages. We can remove that once
distro-compiled systemds have moved to libind2.
These buttons were added specifically for joysticks with lots of buttons, no
other device should be using them. See kernel commit
cf2f765f18960 "HID: handle joysticks with large number of buttons"
We only test for BTN_TRIGGER_HAPPY (an alias for BTN_TRIGGER_HAPPY1) here, a
device that sets buttons 2 and above but doesn't set 1 is considered buggy.
https://github.com/systemd/systemd/issues/6137
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
/var can be on a remote filesystem, thus hooking it to local-fs.target is not correct.
Also, only install the mount unit when machined is enabled, because
machined is the one managing the underlying device, and thus makes no
sense without machined.
Fixes#1175
Previously we'd propagate errors returned by user callbacks configured
in vtables back to the users only for method handlers and property
get/set handlers. This does the same for child enumeration and when we
check whether a fallback unit exists.
Without this the failure will be treated as a non-recoverable connection
error and result in connection termination.
Fixes: #6059
