IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This allows us to run networkd mostly unpriviliged with the exception of
CAP_NET_* and CAP_SYS_MODULE. I'd really like to get rid of the latter
though...
The ptrace capability was only necessary to detect virtualizations
environments. Since we changed the logic to determine this to not
require priviliges, there's no need to carry the CAP_SYS_PTRACE
capability anymore.
Create initial stamp file with compiled-in time to prevent bootups
with clocks in the future from storing invalid timestamps.
At shutdown, only update the timestamp if we got an authoritative
time to store.
This is useful to make sure the system clock stays monotonic even on
systems that lack an RTC.
Also, why we are at it, also use the systemd release time for bumping
the clock, since it's a slightly less bad than starting with jan 1st,
1970.
This also moves timesyncd into the early bootphase, in order to make
sure this initial bump is guaranteed to have finished by the time we
start real daemons which might write to the file systemd and thus
shouldn't leave 1970's timestamps all over the place...
To make sure we don't delay boot on systems where (some) network links are managed by someone else
we don't block if something else has successfully brought up a link.
We will still block until all links we are aware of that are managed by networkd have been
configured, but if no such links exist, and someone else have configured a link sufficiently
that it has a carrier, it may be that the link is ready so we should no longer block.
Note that in all likelyhood the link is not ready (no addresses/routes configured),
so whatever network managment daemon configured it should provide a similar wait-online
service to block network-online.target until it is ready.
The aim is to block as long as we know networking is not fully configured, but no longer. This
will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't
know whether networkd is the main/only network manager.
Even in the case networking is fully configured by networkd, the default behavior may not be
sufficient: if two links need to be configured, but the first is fully configured before the
second one appears we will assume the network is up. To work around that, we allow specifying
specific devices to wait for before considering the network up.
This unit is enabled by default, just like systemd-networkd, but will only be pulled in if
anyone pulls in network-online.target.
Add a new config 'Activating' directive which denotes whether a busname
is actually registered on the bus. It defaults to 'yes'.
If set to 'no', the .busname unit only uploads policy, which will remain
active as long as the unit is running.
Add the first 3270 terminal device that is associated with the Linux preferred
console to the list of virtualization consoles. This is required to
automatically start a getty if the conmode=3270 kernel parameter is specified
for Linux on z/VM instances. Note that a queued upstream patch also enable
the 3270 terminal device if it is associated with the Linux preferred console.
How
To successfully start agetty on a 3270 terminal, a change in the agetty
parameter order is required. Previously, agetty would started like this:
/sbin/agetty --keep-baud 3270/tty1 115200,38400,9600 TERM
The agetty program interprets the "3270/tty1" as baud rate and fails to start
with the "bad speed: 3270/tty1" error message. Fixing this in agetty is more
complex rather than reordering the command line parameters like this:
/sbin/agetty --keep-baud 115200,38400,9600 3270/tty1 TERM
According to agetty sources and "agetty --help", agetty accepts the "tty",
"baudrate tty", and "tty baudrate" specifications.
P.S. The "tty: Set correct tty name in 'active' sysfs attribute" introduces
a change to display the terminal device which is associated with the
Linux preferred console. This change helps to let systemd handle this
particular case only. Without the changes of this commit, no additional
3270 terminal device can be managed by systemd.
https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/commit/?id=723abd87f6e536f1353c8f64f621520bc29523a3
The instance name is never escaped in the udev rule, but unescaped in the unit.
This results in the following error message on Asus boards:
Failed to get backlight or LED device 'backlight:eeepc/wmi': No such file or directory
That is, without --enable-kdbus and kdbus running.
With --enable-kdbus things are more complicated, because dbus might be
necessary, if kdbus is missing at runtime. If it is not necessary,
the socket will be started, which is not imporant, but not the service.
This should fix some race with terminating systemd --user, where the
system systemd instance might race against the user systemd instance
when sending SIGTERM.
We may not have a dbus daemon in the initrd (until we can rely on kdbus). In
this case, simply ignore any attempts at using the bus. There is only one user
for now, but surely more to come.
In order to work reliably in the real root without kdbus, but at the same time
don't delay boot when kdbus is in use, order ourselves after dbus.service.
They were supposed to make it easy to make the default.target a symlink
to these targets, but this was never advertised and we have a better
command for this now in "systemctl set-default". Since the install
section makes the output of "systemctl list-unit-files" confusing (since
it makes the units appear as "disabled"), let's drop the sections.
Various operations done by systemd-tmpfiles may only be safely done at
boot (e.g. removal of X lockfiles in /tmp, creation of /run/nologin).
Other operations may be done at any point in time (e.g. setting the
ownership on /{run,var}/log/journal). This distinction is largely
orthogonal to the type of operation.
A new switch --unsafe is added, and operations which should only be
executed during bootup are marked with an exclamation mark in the
configuration files. systemd-tmpfiles.service is modified to use this
switch, and guards are added so it is hard to re-start it by mistake.
If we install a new version of systemd, we actually want to enforce
some changes to tmpfiles configuration immediately. This should now be
possible to do safely, so distribution packages can be modified to
execute the "safe" subset at package installation time.
/run/nologin creation is split out into a separate service, to make it
easy to override.
https://bugzilla.redhat.com/show_bug.cgi?id=1043212https://bugzilla.redhat.com/show_bug.cgi?id=1045849
Condition for /lib (necessary for split /usr) was missing from the unit.
Some changes which were done in tmpfiles.d(5) were not carried over to
systemd-tmpfiles(1).
Also use markup where possible.
This has the effect that systemd-networkd won't run in containers
without network namespacing wher CAP_NET_ADMIN is (usually) not
available. It will still run in containers with network namespacing on
(where CAP_NET_ADMIN is usually avilable).
We might remove this condition check again if networkd provides services
to apps that also are useful in containers lacking network namespacing,
however, as long as it doesn't it should be handled like udevd and be
excluded in such containers.
Adds a new call sd_event_set_watchdog() that can be used to hook up the
event loop with the watchdog supervision logic of systemd. If enabled
and $WATCHDOG_USEC is set the event loop will ping the invoking systemd
daemon right after coming back from epoll_wait() but not more often than
$WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than
$WATCHDOG_USEC/4*3, to make sure the service manager is called in time.
This means that setting WatchdogSec= in a .service file and calling
sd_event_set_watchdog() in your daemon is enough to hook it up with the
watchdog logic.
This daemon listens for and configures network devices tagged with
'systemd-networkd'. By default, no devices are tagged so this daemon
can safely run in parallel with existing network daemons/scripts.
Networks are configured in /etc/systemd/network/*.network. The first .network
file that matches a given link is applied. The matching logic is similar to
the one for .link files, but additionally supports matching on interface name.
The mid-term aim is to provide an alternative to ad-hoc scripts currently used
in initrd's and for wired setups that don't change much (e.g., as seen on
servers/and some embedded systems).
Currently, static addresses and a gateway can be configured.
Example .network file:
[Match]
Name=wlp2s0
[Network]
Description=My Network
Gateway=192.168.1.1
Address=192.168.1.23/24
Address=fe80::9aee:94ff:fe3f:c618/64
DRM Master access requires CAP_SYS_ADMIN, yay! Add it to the capability
bounding set for systemd-logind. As CAP_SYS_ADMIN actually allows a huge
set of actions, this mostly renders the restriction-set useless. Anyway,
patches are already pending to reduce the restriction on the kernel side.
But these won't really make it into any stable-release so for now we're
stuck with CAP_SYS_ADMIN.
With the advent of systemd --user sessions, it's become very interesting to spawn X as a user unit, as well as accompanying processes that may have previously been in a .xinitrc/.xsession, or even just to replace a collection of XDG/GDM/KDM/etc session files with independent systemd --user units. The simplest case here would be to login on a tty, with the traditional /usr/sbin/login "login manager".
However, systemd --user (spawned by user@.service) is at the top level of the slice for the user, and does not inherit any environment variables from the login process. Given the number of common applications which rely on SHELL being set in the environment, it seems like the cleanest way to provide this variable is to set it to %s in the user@.service.
Ideally in the long-term, applications which rely on SHELL being set should be fixed to just grab it from getpwnam() or similar, but until that becomes more common, I propose this simple change to make user sessions a little bit nicer out of the box.
systemd-logind will start user@.service. user@.service unit uses
PAM with service name 'systemd-user' to perform account and session
managment tasks. Previously, the name was 'systemd-shared', it is
now changed to 'systemd-user'.
Most PAM installations use one common setup for different callers.
Based on a quick poll, distributions fall into two camps: those that
have system-auth (Redhat, Fedora, CentOS, Arch, Gentoo, Mageia,
Mandriva), and those that have common-auth (Debian, Ubuntu, OpenSUSE).
Distributions that have system-auth have just one configuration file
that contains auth, password, account, and session blocks, and
distributions that have common-auth also have common-session,
common-password, and common-account. It is thus impossible to use one
configuration file which would work for everybody. systemd-user now
refers to system-auth, because it seems that the approach with one
file is more popular and also easier, so let's follow that.
This means we can use default dependencies on mount units without having to get them automatically
ordered before the filesystem targets.
Reported-by: Thomas Baechler <thomas@archlinux.org>
Fixes errors seen when booting VMs on QEMU like
systemd[1]: kmod-static-nodes.service: main process exited, code=exited, status=203/EXEC
systemd[1]: Failed to start Create list of required static device nodes for the current kernel.
systemd[1]: Unit kmod-static-nodes.service entered failed state.
Make sure that mknod capability is available
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Without this, fsck would be re-run if any other service which pulls
in a target requiring one of the mounts was started after fsck was done
but before the initial transaction was done.
https://bugs.freedesktop.org/show_bug.cgi?id=66784
As many laptops don't save/restore screen brightness across reboots,
let's do this in systemd with a minimal tool, that restores the
brightness as early as possible, and saves it as late as possible. This
will cover consoles and graphical logins, but graphical desktops should
do their own per-user stuff probably.
This only touches firmware brightness controls for now.
Without this, tmpfiles-setpu-dev would be re-run if any other service,
which pulls in basic.target, was started after setup-dev was finished
and before basic.target was active.
