IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently we allocate fixed-size memory for event sources: the largest
any of the event source type needs. Discrepancy in the sizes needed for
the various event sources is quite major however: it's 144 bytes on
x86_64, i.e. more than two cache lines.
hence, let's be a tiny bit more careful, and allocate exactly as much as
we need, but not more.
Otherwise, if /dev/shm has a directory that cannot be accessible by
unprivileged user, then we cannot pick a dynamic user, and test service
may fail with unexpected error code:
---
Failed to enter shared memory directory /dev/shm/systemd-watch-bind-BqAGlN: Permission denied
exec-dynamicuser-supplementarygroups.service: Failed to update dynamic user credentials: Device or resource busy
exec-dynamicuser-supplementarygroups.service: Failed at step USER spawning /bin/sh: Device or resource busy
src/test/test-execute.c:885:test_exec_dynamicuser: exec-dynamicuser-supplementarygroups.service: can_unshare=no: exit status 217, expected 216
---
Follow-up for 4e032f654b.
The TPM code expects a description unless the PCR index indicates that
no measurements have to take place. The assert was preempting this
check from happening.
Fixes: #26428
Remove duplicate KERNEL_INSTALL_MACHINE_ID from message and also
specify the correct origin of layout variable.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
When default.target is rescue.target, exiting from the single-user shell
results in lost of the control of the current terminal. This is because the
operation performed to continue to boot is systemctl default but default.target
is now rescue.target and it is already active. Hence, no new process that
controls the current terminal is created. Users need to make hardware reset to
recover the situation.
This sounds like a bit corner case issue and some might feel configuring
default.target as rescue.target is odd because there are several other ways to
transition to rescue.mode without configuring default.target to rescue.target
such as systemctl rescue or systemd.unit=rescue.target something like
that. However, users unfamiliar with systemd operations tend to come up with
systemctl set-default rescue.target.
To fix this issue, let's transition to default.target only when default.target
is inactive. Otherwise, invoke the single-user shell again to keep control of
the current terminal for users.
This new logic depends on whether D-Bus working well. Exiting without any check
of result of systemctl default could lead to again the control lost of the
current terminal. Hence, add checking results of each D-Bus operations
including systemctl default and invoke the single-user shell if they fail.
Debian/Ubuntu use /usr/lib/<triplet> instead of /usr/lib64, so configure it
accordingly. This is especially important for cryptsetup token plugins,
as cryptsetup comes from the distro and is configured to look into those
directories.
"Failed to dissect image: connection timed out" messages have been
appearing sporadically in mkosi CI. Let's enable debug logging to
help figure out why.
In journalctl we don't run the static destructors defined via
the STATIC_DESTRUCTOR_REGISTER() macro, since it requires a corresponding
static_destruct() call. In most cases this is handled by
the DEFINE_(TEST_)?MAIN*() macros, but journalctl defines its own main
function, so let's handle that as well.
$ valgrind --suppressions=valgrind.supp --show-leak-kinds=all --leak-check=full build/journalctl --no-pager -u system.slice -n 10 >/dev/null
==2778093== Memcheck, a memory error detector
==2778093== Copyright (C) 2002-2022, and GNU GPL'd, by Julian Seward et al.
==2778093== Using Valgrind-3.19.0 and LibVEX; rerun with -h for copyright info
==2778093== Command: build/journalctl --no-pager -u system.slice -n 10
==2778093==
==2778093==
==2778093== HEAP SUMMARY:
==2778093== in use at exit: 8,221 bytes in 4 blocks
==2778093== total heap usage: 458 allocs, 454 frees, 255,182 bytes allocated
==2778093==
==2778093== 13 bytes in 1 blocks are still reachable in loss record 1 of 4
==2778093== at 0x484586F: malloc (vg_replace_malloc.c:381)
==2778093== by 0x4DA256D: strdup (strdup.c:42)
==2778093== by 0x4ADB747: strv_extend_with_size (strv.c:544)
==2778093== by 0x405386: strv_extend (strv.h:45)
==2778093== by 0x40816F: parse_argv (journalctl.c:933)
==2778093== by 0x40EAB5: main (journalctl.c:2111)
==2778093==
==2778093== 16 bytes in 1 blocks are still reachable in loss record 2 of 4
==2778093== at 0x484578A: malloc (vg_replace_malloc.c:380)
==2778093== by 0x484A70B: realloc (vg_replace_malloc.c:1437)
==2778093== by 0x4ADB2A3: strv_push_with_size (strv.c:423)
==2778093== by 0x4ADB620: strv_consume_with_size (strv.c:496)
==2778093== by 0x4ADB770: strv_extend_with_size (strv.c:548)
==2778093== by 0x405386: strv_extend (strv.h:45)
==2778093== by 0x40816F: parse_argv (journalctl.c:933)
==2778093== by 0x40EAB5: main (journalctl.c:2111)
==2778093==
==2778093== LEAK SUMMARY:
==2778093== definitely lost: 0 bytes in 0 blocks
==2778093== indirectly lost: 0 bytes in 0 blocks
==2778093== possibly lost: 0 bytes in 0 blocks
==2778093== still reachable: 29 bytes in 2 blocks
==2778093== suppressed: 8,192 bytes in 2 blocks
==2778093==
==2778093== For lists of detected and suppressed errors, rerun with: -s
==2778093== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
If UDP is blocked on the system (e.g. by iptables or BPF), the kernel will
return EPERM on some or all of the system calls (connect, sendmsg, etc.).
In this case, try to fall back to TCP, which hopefully will not be blocked.
Allow defining the default keymap to be used by
vconsole-setup through a build option. A template
vconsole.conf also gets populated by tmpfiles if
it doesn't exist.
Salt was added in v253. We are not checking whether it was actually found
(non-zero size), so when an old tpm+pin enrollment is opened things go boom.
For good measure, check both the buffer and the size in both places.
Assertion 'saltlen > 0' failed at src/shared/tpm2-util.c:2490, function tpm2_util_pbkdf2_hmac_sha256(). Aborting.
