IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
That indicates the interface name in 'iif' or 'oif' cannot be resolved
when 'ip rule' command is invoked. That's natural when networkd fail to
remove rule but the corresponding interface is already removed.
To make not the residual rules interfere subsequent test cases, let's
ignore the flag and actually remove unwanted rules.
Note, `systemd-analyze foo@.service --instance=hoge` is equivalent to
`systemd-analyze foo@hoge.service`. But, the option may be useful when
e.g. passing multiple template units that have restriction on their
instance name:
```
$ ls
template_aaa@.service template_bbb@.service template_ccc@.service
$ systemd-analyze ./template_* --instance=hoge
```
Without the option, we need to embed an instance name into each unit
name, so cannot use globs.
Prompted by #33681.
When running unprivileged, checking /proc/1/root doesn't work because
it requires privileges. Instead, let's add an environment variable so
the process that chroot's can tell (systemd) subprocesses whether
they're running in a chroot or not.
Otherwise, several messages for the last invocation have not been
stored to journal yet.
Hopefully fixes the following race:
===
[ 603.037765] H systemd-run[10503]: Running as unit: invocation-id-test-26448.service; invocation ID: 1a49edeb05a641aaa2def72411134822
[ 603.099587] H bash[10504]: invocation 10 1a49edeb05a641aaa2def72411134822
[ 603.212069] H systemd[1]: invocation-id-test-26448.service: Deactivated successfully.
[ 603.225092] H systemd-run[10503]: Finished with result: success
[ 603.225163] H TEST-04-JOURNAL.sh[10506]: + journalctl --list-invocation -u invocation-id-test-26448.service
[ 603.225318] H systemd-run[10503]: Main processes terminated with: code=exited, status=0/SUCCESS
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: + tee /tmp/tmp.UzSmYamXyg/10
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: IDX INVOCATION ID FIRST ENTRY LAST ENTRY
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -9 d6efabb546014027b6bd7ee3a78386d6 Wed 2024-08-14 22:12:16 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -8 3e402b81c28d4a8fa2c5e8e31dffd9ee Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -7 5ebd0ba07d4f4f52bc84275f55a3ee2e Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -6 bc53c49d6ce24bb7acd438c3e61cfb23 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -5 24680907919e4839a75378117bb5a816 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -4 ec364ed7673c4a1fa22929f95ce7047b Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -3 2e8a4dea43044d1a9faf922f7a2f3d42 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -2 ac610b6e6c9c4a29bf8947890685478b Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: -1 9b7d52c3620948f9831e323910f605f5 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225357] H TEST-04-JOURNAL.sh[10507]: 0 1a49edeb05a641aaa2def72411134822 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.225823] H systemd-run[10503]: Service runtime: 174ms
[ 603.225866] H TEST-04-JOURNAL.sh[10508]: + journalctl --list-invocation -u invocation-id-test-26448.service --reverse
[ 603.226110] H systemd-run[10503]: CPU time consumed: 12ms
[ 603.226142] H TEST-04-JOURNAL.sh[10509]: + tee /tmp/tmp.UzSmYamXyg/10-r
[ 603.226378] H systemd-run[10503]: Memory peak: 1.4M (swap: 0B)
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: IDX INVOCATION ID FIRST ENTRY LAST ENTRY
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: 0 1a49edeb05a641aaa2def72411134822 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:18 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -1 9b7d52c3620948f9831e323910f605f5 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -2 ac610b6e6c9c4a29bf8947890685478b Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -3 2e8a4dea43044d1a9faf922f7a2f3d42 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -4 ec364ed7673c4a1fa22929f95ce7047b Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -5 24680907919e4839a75378117bb5a816 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -6 bc53c49d6ce24bb7acd438c3e61cfb23 Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -7 5ebd0ba07d4f4f52bc84275f55a3ee2e Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -8 3e402b81c28d4a8fa2c5e8e31dffd9ee Wed 2024-08-14 22:12:17 UTC Wed 2024-08-14 22:12:17 UTC
[ 603.230161] H TEST-04-JOURNAL.sh[10509]: -9 d6efabb546014027b6bd7ee3a78386d6 Wed 2024-08-14 22:12:16 UTC Wed 2024-08-14 22:12:17 UTC
===
When unit_need_daemon_reload() calls unit_find_dropin_paths() to check
for new drop-in configs, the manager's unit path cache is used to limit
which directories are considered. If a new drop-in directory is created,
it may not be in the unit path cache, and hence unit_need_daemon_reload()
may return false, despite a new drop-in being present. However, if a
unit path cache is not given to unit_file_find_dropin_paths() at all,
then it behaves as if the target path was found in the unit path cache.
So, to fix this, adapt unit_find_dropin_paths() to take a boolean
argument indicating whether or not to pass along the unit path cache.
Set this to false in unit_need_daemon_reload().
Fixes#31752
This allows for example forcing to use /sbin/init instead of always
using /usr/lib/systemd/systemd if it exists. Or it allows using a
different path altogether.
When creating a user, check if the requested group name matches a user
name in the queue. If that matched user name is also going to be a group
name, then use it for the new user too. In other words, allow the
following:
u foo -
u bar -:foo
when both foo and bar are new users.
Fixes#33547
This fixes the following assertion:
===
SYSTEMD_LOG_LEVEL=debug systemctl --user -H foo --boot-loader-entry=help
Assertion 'transport != BUS_TRANSPORT_REMOTE || runtime_scope == RUNTIME_SCOPE_SYSTEM' failed at src/shared/bus-util.c:284, function bus_connect_transport(). Ignoring.
Failed to connect to bus: Operation not supported
===
Fixes a bug introduced by 97af80c5a7.
Fixes#33661.
Fixes oss-fuzz#70153.
Running the following commands:
# mkdir -p /var/lib/pcrlock.d/123-empty.pcrlock.d
# /usr/lib/systemd/systemd-pcrlock predict --pcr=1+2+3+4+5+16
Will result in:
...
Floating point exception
Running the following commands:
# mkdir -p /var/lib/pcrlock.d/123-empty.pcrlock.d
# /usr/lib/systemd/systemd-pcrlock make-policy --pcr=1+2+3+4+5+16
Will result to this (partial) log:
...
Predicted future PCRs in 133us.
[]
...
Written policy digest 0000000000000000000000000000000000000000000000000000000000000000 to NV index 0x1921da6
...
So, add missing checks to handle gracefully cases where there's no variant
inside the component.
Signed-off-by: Arnaud Patard <arnaud.patard@collabora.com>
The PrepareForShutdownWithMetadata signal was added via
e4aab5cf1a but a corresponding property
was not. A property has to be a single type, so the bool needs to be
one of the key/value pairs as 'ba{sv}' is not a valid property.
+ Scale the x-axis of the resulting plot by a factor (default 1.0)
+ Add activation timestamps to each bar
Signed-off-by: rajmohan r <rajmohan.r@kpit.com>
Rebuilding the integration test every time is very slow. Let's
introduce a way to iterate on an integration test without rebuilding
the image every time. By making a btrfs snapshot before we run the
integration test, we can then systemctl soft-reboot after running
the test to restore the rootfs to a pristine state before running
the test again.
As /run/nextroot will get nuked on reboot or soft-reboot, we introduce
a tmpfiles snippet to make sure it is recreated every (soft-)reboot
and adapt the existing tests to deal with this new symlink.
unit_start() advertises that start requests don't get suppressed,
so that it could be used to manually speed up auto restarts.
However, service_start() so far rejected this, stating that
clients should issue restart request in order to trigger
BindsTo=/OnFailure=.
That seems to be a red herring though, because for a long time
the service states between auto-restarts were buggy (#27594).
With the introduction of RestartMode=direct, the behavior
is sane again and customizable, hence I see no reason to refuse
this anymore. Whether those deps are triggered solely depends
on RestartMode= now.
Plus, filter out some intermediate states that should never
be seen in service_start().
Fixes#33890
Even if the glob pattern is valid, the pattern may match credentials
with invalid names. So, we need to check the names of the found
credentials.
Follow-up for 947c4d3952.
Since, at least the old framework, checks for the presence of the file
at the end and marks the whole test as skipped if it exists.
Resolves: systemd/systemd-centos-ci#728
This allows for "per-instance" credentials for units. The use case
is best explained with an example. Currently all our getty units
have the following stanzas in their unit file:
"""
ImportCredential=agetty.*
ImportCredential=login.*
"""
This means that setting agetty.autologin=root as a system credential
will make every instance of our all our getty units autologin as the
root user. This prevents us from doing autologin on /dev/hvc0 while
still requiring manual login on all other ttys.
To solve the issue, we introduce support for renaming credentials with
ImportCredential=. This will allow us to add the following to e.g.
serial-getty@.service:
"""
ImportCredential=tty.serial.%I.agetty.*:agetty.
ImportCredential=tty.serial.%I.login.*:login.
"""
which for serial-getty@hvc0.service will make the service manager read
all credentials of the form "tty.serial.hvc0.agetty.xxx" and pass them
to the service in the form "agetty.xxx" (same goes for login). We can
apply the same to each of the getty units to allow setting agetty and
login credentials for individual ttys instead of globally.
Remove an early return that prevents --prompt-root-password or
--prompt-root-shell and systemd.firstboot=off using credentials. In that case,
arg_prompt_root_password and arg_prompt_root_shell will be false, but the
prompt helpers still need to be called to read the credentials. Furthermore, if
only the root shell has been set, don't overwrite the root password.
If /etc/passwd and/or /etc/shadow exist but don't have an existing root entry,
one needs to be added. Previously this only worked if the files didn't exist.
Although locked and empty passwords in /etc/passwd are treated the same, in all
other cases the entry is configured to read the password from /etc/shadow.
It means: a) user cannot be created, something's wrong in the
test environment -> fail the test; b) user already exists, we shall not
continue and delete (foreign) user.
TEST-46-HOMED fails on ext4 because the filesystem is deemed to small
for activation by cryptsetup. Let's bump the minimal filesystem size for
ext4 a bit to be in the same ballpark as ext4 and btrfs to avoid weird
errors due to impossibly small filesystems.
Also use U64_MB while we're touching this.
This adds support in `systemd-analyze capability` for decoding
capability masks (sets), e.g.:
```console
$ systemd-analyze capability --mask 0000000000003c00
NAME NUMBER
cap_net_bind_service 10
cap_net_broadcast 11
cap_net_admin 12
cap_net_raw 13
```
This is intended as a convenience tool for pretty-printing capability
values as found in e.g. `/proc/$PID/status`.
Add a test for the new bridge netlink attributes IFLA_BR_FDB_N_LEARNED and
IFLA_BR_FDB_MAX_LEARNED.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Let's document in detail how to build the integration test image and run
the integration tests without building systemd. To streamline the process,
we stop automatically using binaries from build/ when invoking mkosi directly
and don't automatically use a tools tree anymore if systemd on the host is too
old. Instead, we document these options in HACKING.md and change the mkosi meson
target to automatically use the current build directory as an extra binary search
path for mkosi.
We already have selinux=0 in the default kernel command line so
enforcing=0 is redundant. Instead, pass in enforcing=0 when we
enable selinux in TEST-06-SELINUX.
As per DPS the UUID for /var/ should be keyed by the local machine-id,
which is non-trivial to do in a script. Enhance 'systemd-id128' to
take 'var-partition-uuid' as a verb, and if so perform the
calculation.
Let's make sure we don't load libnss_systemd.so from bash as the
necessary environment variables aren't set to make that work when
we're running with sanitizers enabled.
We can't add a sanitizer wrapper for bash as the wrapper runs using
bash so you end up in a loop.
Follow-up for 19a44dfe45
If a drop-in is set from upper level, e.g. global unit_type.d/,
even if a unit is masked, its dropin_paths would still be partially
populated. However, unit_need_daemon_reload() would always
compare u->dropin_paths with empty strv in case of masked units,
resulting in it always returning true. Instead, let's ignore
dropins entirely here.
Fixes#33672
- Stop installing the policy in the initramfs as it's not really
supported anyway (https://github.com/fedora-selinux/selinux-policy/issues/2221)
- Stop relabeling on first boot and prefer to do it at image build time
- Disable mkosi relabeling by default but enable it in CI
- Build image as root in CI so the SELinux relabeling works properly
In https://github.com/systemd/mkosi/pull/2847, the '@' specifier is
removed, CLI arguments take priority over configuration files again
and the "main" image is defined at the top level instead of in
mkosi.images/. Additionally, not every setting from the top level
configuration is inherited by the images in mkosi.images/ anymore,
only settings which make sense to be inherited are inherited.
This commit gets rid of all the usages of '@', moves the "main" image
configuration from mkosi.images/system to the top level and gets rid
of various hacks we had in place to deal with quirks of the old
configuration parsing logic.
We also remove usages of Images= and --append as these options are
removed by the mentioned PR.
I don't know why yet, but TEST-73-LOCALE can take more than 10
minutes. Until we figure out why, let's give it a higher priority
so it doesn't bottleneck the test run.
Otherwise fixfiles will try to relabel it which could potentially
lead to disaster. We also change the recommendation in HACKING.md
to set the default so that TEST-06-SELINUX can override it.
If the io.systemd.DynamicUser or io.systemd.Machine files exist,
but nothing is listening on them, the nss-systemd module returns
ECONNREFUSED and systemd-sysusers fails to creat the user/group.
This is problematic when ran by packaging scripts, as the package
assumes that after this has run, the user/group exist and can
be used. adduser does not fail in the same situation.
Change sysusers to print a loud warning but otherwise continue
when NSS returns an error.
The previous commit tries to extract a substring from the
extension-release suffix, but that is not right, it's only the
images that need to be versioned and extracted, use the extension-release
suffix as-is. Otherwise if it happens to contain a prefix that
matches the wrong image, it will be taken into account.
Follow-up for 37543971af
